A Reusable MOF-Supported Single-Site Zinc(II) Catalyst for Efficient Intramolecular Hydroamination of o-Alkynylanilines

Perfluoroalkyl-Decorated Noble-Metal-Free MOFs for the Highly Efficient One-Pot Four-Component Coupling between Aldehydes, Amines, Alkynes, and Flue Gas CO2

The non-noble-metal catalysed-multicomponent reactions between flue gas CO2 and cheap industrial raw stocks into high value-added fine chemicals is a promising manner for the ideal CO2 utilization route. To achieve this, the key fundamental challenge is the rational development of highly efficient and facile reaction pathway while establishing compatible catalytic system. Herein, through the stepwise solvent-assisted linker installation, post-synthetic fluorination and metalation, we report the construction of a series of perfluoroalkyl-decorated noble-metal-free metal-organic frameworks (MOFs) PCN-(BPY-CuI)-(TPDC-Fx ) [BPY=2,2'-bipyridine-5,5'-dicarboxylate, TPDC-NH2 =2'-amino-[1,1':4',1''-terphenyl]-4,4''-dicarboxylic acid] that can catalyze the one-pot four-component reaction between alkyne, aldehyde, amine and flue gas CO2 for the preparation of 2-oxazolidinones. Such assembly endows the MOFs with superhydrophobic microenvironment, superior water resistance and highly stable catalytic site, leading to 21 times higher turnover numbers than that of homogeneous counterparts. Mechanism investigation implied that the substrates can be efficiently enriched by the MOF wall and then the adsorbed amine species act as an extrinsic binding site towards dilute CO2 through their strong preferential formation to carbamate acid. Moreover, density functional theory calculations suggest the tetrahedral geometry of Cu in MOF offers special resistance towards amine poisoning, thus maintaining its high efficiency during the catalytic process.

Photocatalytic degradation of ciprofloxacin using a novel carbohydrate-based nanocomposite from aqueous solutions

Pharmaceutical substances in the ecosystem pose a notable hazard to human and aquatic organism well-being. The occurrence of ciprofloxacin (CIP) within water sources or the food chain can perturb plant biochemical processes and induce drug resistance in both humans and animals. Therefore, effective removal is imperative prior to environmental discharge. This study introduces a Novel Carbohydrate-Based Nanocomposite (Fe3O4/MOF/AmCs-Alg) as a proficient photocatalytic agent for degrading CIP in aqueous solutions. The fabricated nanocomposite underwent characterization using FTIR, XRD, FESEM, DRS, and VSM techniques. The analyses conducted verified the successful synthesis of the Fe3O4/MOF/AmCs-Alg nanocomposite. Utilizing the optimized parameters (pH = 5, nanocomposite dose = 0.4 g/L, CIP concentration = 10 mg/L, light intensity = 75 mW/cm2, and a duration of 45min), the Fe3O4/MOF/AmCs-Alg/Vis nanocomposite demonstrated an impressive CIP degradation efficiency of 95.85%. Under optimal experiment conditions, CIP removal efficiency in tap water and treated wastewater samples was 91.27% and 76.78%, respectively. Furthermore, the total organic carbon (TOC) analysis indicated a mineralization rate of 51.21% for CIP. Trapping studies demonstrated that the superoxide radical (O2°-) had a notable contribution to the breakdown of CIP. In summary, the Fe3O4/MOF/AmCs-Alg/Vis system offers numerous benefits, encompassing effective degradation capabilities, effortless catalyst retrieval, and remarkable nanocomposite reusability.

A single-site porphyrin (Cu)-based COF electrocatalyst for the electrochemical detection of gallic acid sensitively

Sensitive and convenient determination of gallic acid (GA) is vital for food safety. Here, a novel porphyrin (Cu)-based covalent organic framework named as COF(Cu) was successfully synthesized by condensing pre-metalated 5,10,15,20-tetrakis (para-aminophenyl) porphyrin copper (II) and 2,3,6,7-tetra (4-formylphenyl) tetrathiafulvalene ligands. By combining the advantages of porphyrin with tetrathiafulvalene, it may be possible to create a COF with an intrinsically effective charge-transfer channel. In addition, the Cu-N4 type in the COF(Cu) can be regarded as the single-site electrocatalyst. Benefiting from these advantages, the COF(Cu) based electrochemical sensor demonstrated outstanding response to gallic acid (GA). Under the optimal conditions by square wave voltammetry technique, the COF(Cu) modified electrode showed a wide linear range (0.01-1000 μM), a low detection limit (2.81 nM), good reproducibility, acceptable selectivity as well as high stability. Moreover, the established approach was adopted to detect GA in real tea samples with good recoveries, indicating that the COF(Cu) based electrochemical sensor may pave the way for the application in food analysis.

Construction of Metal Organic Framework-Derived Fe-N-C Oxidase Nanozyme for Rapid and Sensitive Detection of Alkaline Phosphatase

Alkaline phosphatase (ALP) is a phosphomonoester hydrolase and serves as a biomarker in various diseases. However, current detection methods for ALP rely on bulky instruments, extended time, and complex operations, which are particularly challenging in resource-limited regions. Herein, we synthesized a MOF-derived Fe-N-C nanozyme to create biosensors for the coulometric and visual detection of ALP. Specifically, we found the Fe-N-C nanozyme can efficiently oxidize 3,3',5,5'-tetramethylbenzidine (TMB) to generate blue-colored tetramethyl benzidine (TMBox) without the need for H2O2. To construct the biosensor, we incorporated the ALP enzymatic catalytic reaction to inhibit the oxidation of TMB by Fe-N-C oxidase nanozyme. This biosensor showed rapid and highly sensitive detection of ALP in both buffer and clinical samples. The limit of detection (LOD) of our approach could be achieved at 3.38 U L-1, and the linear range was from 5 to 60 U L-1. Moreover, we also developed a visual detection for ALP by using a smartphone-based assay and facilitated practical and accessible point-and-care testing (POCT) in resource-limited areas. The visual detection method also achieved a similar LOD of 2.12 U L-1 and a linear range of 5-60 U L-1. Our approach presents potential applications for other biomarker detections by using ALP-based ELISA methods.

N-Heterocyclic carbene-catalyzed enantioselective annulation of 2-amino-1H-indoles and bromoenals for the synthesis of chiral 2-aryl-2,3-dihydropyrimido[1,2-a]indol-4 (1H)-ones

An efficient N-heterocyclic carbene (NHC)-catalyzed enantioselective [3 + 3] annulation of 2-bromoenals with 2-amino-1H-indoles has been developed. A series of functionalized 2-aryl-2,3-dihydropyrimido[1,2-a]indol-4(1H)-ones were synthesized using NHCs as the catalyst in good yields with high to excellent enantioselectivities.

Dodging the Conventional Reactivity of o-Alkynylanilines under Gold Catalysis for Distal 7-endo-dig Cyclization

A direct ring-closing strategy involving a less facile 7-endo-dig carbacyclization of o-alkynylaniline derivatives for the synthesis of benzo[b]azepines has been presented. The trivial well-documented 5-endo-dig cyclization in o-alkynylaniline derivatives due to high nucleophilicity of nitrogen has been overcome by using their vinylogous amides under gold catalysis to access a wide array of benzo[b]azepines in an atom economical way with excellent functional group compatibility. Deuterium scrambling experiments and DFT studies favor a mechanism involving stabilizing conformational change of the initially formed seven-membered vinyl gold intermediate through a key cyclopropyl gold carbene intermediate and its subsequent protodeauration mediated by the counter anion.

Tuning the Stereoselectivity of an Intramolecular Aldol Reaction by Precisely Modifying a Metal-Organic Framework Catalyst

We report the catalysis of an enantioselective, intramolecular aldol reaction accelerated by an organocatalyst embedded in a series of multicomponent metal‐organic frameworks. By precisely programming the pore microenvironment around the site of catalysis, we show how important features of an intramolecular aldol reaction can be tuned, such as the substrate consumption, enantioselectivity, and degree of dehydration of the products. This tunability arises from non‐covalent interactions between the reaction participants and modulator groups that occupy positions in the framework remote from the catalytic site. Further, the catalytic moiety can be switched form one framework linker to another. Deliberately building up microenvironments that can influence the outcome of reaction processes in this way is not possible in conventional homogenous catalysts but is reminiscent of enzymes.

Experimental and Computational Structural Studies of 2,3,5-Trisubstituted and 1,2,3,5-Tetrasubstituted Indoles as Non-Competitive Antagonists of GluK1/GluK2 Receptors

The blockade of kainate receptors, in particular with non-competitive antagonists, has—due to their anticonvulsant and neuroprotective properties—therapeutic potential in many central nervous system (CNS) diseases. Deciphering the structural properties of kainate receptor ligands is crucial to designing medicinal compounds that better fit the receptor binding pockets. In light of that fact, here, we report experimental and computational structural studies of four indole derivatives that are non-competitive antagonists of GluK1/GluK2 receptors. We used X-ray studies and Hirshfeld surface analysis to determine the structure of the compounds in the solid state and quantum chemical calculations to compute HOMO and LUMO orbitals and the electrostatic potential. Moreover, non-covalent interaction maps were also calculated. It is worth emphasizing that compounds 3 and 4 are achiral molecules crystallising in non-centrosymmetric space groups, which is a relatively rare phenomenon.

One-pot synthesis of 2-arylindole derivatives under transition-metal-free conditions

A new and simple method to prepare 2-arylindole derivatives under transition-metal-free conditions has been developed. When N-acetyl-2-methyl-3-nitroaniline was treated with 2-fluorobenzaldehydes in the presence of Cs2CO3 in DMF at 60 ⁰C, the desired indoles were typically obtained in moderate to good yields (up to 83%). Other aniline substrates were also employed, but only the Knoevenagel condensation occurred to give the corresponding diarylethenes in moderate to excellent yields.

Visible light-driven efficient palladium catalyst turnover in oxidative transformations within confined frameworks

Palladium catalyst turnover by reoxidation of a low-valent Pd species dominates the proceeding of an efficient oxidative transformation, but the state-of-the-art catalysis approaches still have great challenges from the perspectives of high efficiency, atom-economy and environmental-friendliness. Herein, we report a new strategy for addressing Pd reoxidation problem by the fabrication of spatially proximate Ir^III photocatalyst and Pd^II catalyst into metal-organic framework (MOF), affording MOFs based Pd/photoredox catalysts UiO-67-Ir-PdX₂ (X = OAc, TFA), which are systematically evaluated using three representative Pd-catalyzed oxidation reactions. Owing to the stabilization of single-site Pd and Ir catalysts by MOFs framework as well as the proximity of them favoring fast electron transfer, UiO-67-Ir-PdX₂, under visible light, exhibits up to 25 times of Pd catalyst turnover number than the existing catalysis systems. Mechanism investigations theoretically corroborate the capability of MOFs based Pd/photoredox catalysis to regulate the competitive processes of Pd⁰ aggregation and reoxidation in Pd-catalyzed oxidation reactions.

TfOH-promoted synthesis of indoles and benzofurans involving cyclative transposition of vinyl ketone

A metal-free approach to construct indole ring from vinylogous amides derived from o-alkynylanilines involving cyclization, retro-aza-Michael and amine trapping cascade is reported here. This atom-economical transformation has been extended to...

Cu(i) catalysis for selective condensation/bicycloaromatization of two different arylalkynes: direct and general construction of functionalized C-N axial biaryl compounds

Selective condensation/bicycloaromatization of two different arylalkynes is firstly developed under ligand-free copper(i)-catalysis, which allows the direct synthesis of C-N axial biaryl compounds in high yields with excellent selectivity and functional group tolerance. Due to the critical effects of Cu(i) catalyst and HFIP, many easily occurring undesired reactions are suppressed, and the coupled five-six aromatic rings are constructed via the selective formation of two C(sp2)-N(sp2) bonds and four C(sp2)-C(sp2) bonds. The achievement of moderate enantioselectivity verifies its potential for the simplest asymmetric synthesis of atropoisomeric biaryls. Western blotting demonstrated that the newly developed compounds are promising targets in biology and pharmaceuticals. This unique reaction can construct structurally diverse C-N axial biaryl compounds that have never been reported by other methods, and might be extended to various applications in materials, chemistry, biology, and pharmaceuticals.

Application in Anticounterfeiting for Multistimuli Smart Luminescent Materials Based on MOF-on-MOF

The generation of smart responsive materials that can perform multiple drastic optical outputs upon different triggers provides a good platform to encode and hide the information and create multilevel security. In this paper, a smart multiresponsive MOF-on-MOF material was reported using one MOF (HPU-14) as a platform to grow ZIF-8 on the outer layer, combining different emitter centers such as anthracene (ANT) and lanthanide ions (Ln³⁺) confined into two MOFs. Due to the existence of ANT in the pores of ZIF-8, this composite material can exhibit reversible photoswitching behavior under a 365 nm ultraviolet (UV) lamp and enable "resetting and reusing" dynamic anticounterfeiting application. Meanwhile, when treated by an acid/alkali gas, this material can also display reversible switching behavior under 254 nm UV irradiation, which is attributed to the loading of Ln³⁺ on HPU-14. We demonstrated that this excellent practical anticounterfeiting material can decipher the right information only by following a strict stimuli sequence. Therefore, this MOF-on-MOF material synthesis technology for sophisticated counterfeiters, which makes the protected information highly secure, could open a new way to design multilevel anticounterfeiting materials.

Cu2O/Fe3O4/MIL-101(Fe) nanocomposite as a highly efficient and recyclable visible-light-driven catalyst for degradation of ciprofloxacin

Nowadays, the widespread production and use of antibiotics have increased their presence in wastewater systems, posing a potential threat to the environment and human health. The development of advanced materials for treating antibiotics in wastewater has always received special attention. This study aimed to synthesize a novel Cu₂O/Fe₃O₄/MIL-101(Fe) nanocomposite and use it to degrade ciprofloxacin (CIP) antibiotics in an aqueous solution under visible light irradiation. The optical, structural, and morphological attributes of the developed nanocomposite were analyzed by XRD, FTIR, FE-SEM, TGA, DRS, BET, VSM, and UV-Vis techniques. Optimum circumstances for CIP photocatalytic degradation were acquired in 0.5 g L^-1 of catalyst dosage, pH of 7, and CIP concentration of 20 mg L^-1. The degradation efficiency was achieved 99.2% after 105 min of irradiation in optimum circumstances. The chemical trapping experiments confirmed that hydroxyl and superoxide radicals significantly contributed to the CIP degradation process. The results of this study indicated that Cu₂O/Fe₃O₄/MIL-101(Fe) nanocomposite was a highly stable photocatalyst that could effectively remove antibiotics from aqueous solutions. The CIP degradation efficiency only decreased by 6% after five cycles, indicating the excellent recyclability of Cu₂O/Fe₃O₄/MIL-101(Fe) nanocomposites.

Zn-Nx sites on N-doped carbon for aerobic oxidative cleavage and esterification of C(CO)-C bonds

Selective cleavage of C-C bonds is very important in organic chemistry, but remains challenging because of their inert chemical nature. Herein, we report that Zn/NC-X catalysts, in which Zn2+ coordinate with N species on microporous N-doped carbon (NC) and X denotes the pyrolysis temperature, can effectively catalyze aerobic oxidative cleavage of C(CO)-C bonds and quantitatively convert acetophenone to methyl benzoate with a yield of 99% at 100 °C. The Zn/NC-950 can be applied for a wide scope of acetophenone derivatives as well as more challenging alkyl ketones. Detail mechanistic investigations reveal that the catalytic performance of Zn/NC-950 can be attributed to the coordination between Zn2+ and N species to change the electronic state of the metal, synergetic effect of the Zn single sites with their surrounding N atoms, as well as the microporous structure with the high surface area and structural defects of the NC.

Constructing Well-Defined and Robust Th-MOF-Supported Single-Site Copper for Production and Storage of Ammonia from Electroreduction of Nitrate

A combined technique of production and storage of ammonia (NH3) from electroreduction of nitrate (NO3 -) through one material is highly desirable but remains a huge challenge. Herein, we proposed a proof-of-concept strategy for combined NH3 production and storage from electroreduction of NO3 - through elaborately designing a single-site CuII-bipyridine-based thorium metal-organic framework (Cu@Th-BPYDC). Noticeably, the single CuII site, anchored by a solid-liquid postsynthetic metalation within Th-BPYDC, shows a novel square coordination structure, as determined by the single-crystal X-ray diffraction. This strongly implies its enormous potential as an open metal site and consequently enables excellent performance in electroreduction of NO3 - for NH3 production, giving 92.5% Faradaic efficiency and 225.3 μmol h-1 cm-2 yield. Impressively, we can further use Cu@Th-BPYDC material to effectively capture the previously produced NH3 from electroreduction of NO3 -, affording an uptake up to 20.55 mmol g-1 at 298 K at 1 bar. The results in this work will outline a new direction toward the combined technique for advanced electrocatalysis such as gas production plus storage/or separation.

An anionic potassium-organic framework for selective removal of uranyl ions

Effective and selective removal of radioactive metal ions from aqueous solutions is of great importance due to their harmful effects on humans and other living species. However, it is a big challenge for researchers to develop effective adsorbents with high selectivity and a wide pH application range even if some progress has been achieved. Herein, we report an anionic potassium organic framework (UPC-K1) with protonated dimethylamine (Me2NH2+) residing inside the rhomboid channels. The unique 3D firm structure of UPC-K1 is constructed by the cross-linking of the 2D arrangement using weak K-O bonds (2.9270 Å) and strong hydrogen bonds (1.6498 Å), which endows it with excellent chemical stability in organic solvents, boiling water, and aqueous solution in the pH range 3-10. Based on the cation exchange, depending on pore size selectivity, UPC-K1 shows excellent adsorption performance towards UO22+ in aqueous solutions at 298 K with the following characteristics: (1) effective removal in the pH range 3-10; (2) high selectivity over other metal cations; (3) a high adsorption capacity of 551.4 mg g-1; (4) a rapid adsorption equilibrium within 3 hours under stirring; and (5) effective adsorption at low concentrations, with a residual concentration of 0.69 ppm even at an initial concentration of 10.3 ppm after stirring for 24 hours. These results indicate the great potential of UPC-K1 in the treatment of uranium-containing nuclear wastewater.

Boosting Ammonia Uptake within Metal-Organic Frameworks by Anion Modulating Strategy

Ammonia with toxic and corrosive features needs advanced protective materials and removal tools, although it is a vital component in human food supply processes. So, to satisfy these requirements, materials with high adsorption capacity and affinity for ammonia should be developed. The present research has been focused on a series zinc-based metal-organic frameworks (MOF) containing mixed ligands, biphenyl dicarboxylic acid (BPDA) and tris(4-(4H-1,2,4-triazol-4-yl)phenyl)amine (TTPA), which are modulated by different anions including CH₃COO^-, CF₃COO^-, and CF₃SO₃^-. Ammonia uptake capacity was measured via static and dynamic conditions under 50% relative humidity. Among all compounds, CF₃SO₃^- anion could enhance the ammonia uptake capacity of MOFs up to 177.85 and 349 mg/g during static and breakthrough measurements, respectively, so that 83.30% of the total uptake capacity (at P/P_o = 1.0 and 298 K) was achieved at low relative pressure range (up to 0.1). The isosteric heats of ammonia adsorption on PFC-27 and derivatives were calculated in the range of 7.03-10.16 kJ mol^-1 so that they increased upon CF₃SO₃^-, CF₃COO^-, and CH₃COO^- ion incorporation. This is potentially beneficial for enhanced ammonia adsorption. Interestingly, adsorption capacities were retained with only slight changes after five cycles and three regeneration temperatures, 25 °C, 60 °C, and 120 °C, under vacuum. The special affinity for NH₃ adsorption and MOF phase stability after desorption is clearly proved by FTIR spectra and PXRD analysis, respectively. Generally, the results suggest that ion insertion modification is an efficient strategy for enhancement of MOF adsorption performance.

Boosting Interfacial Electron Transfer between Pd and ZnTi-LDH via Defect Induction for Enhanced Metal-Support Interaction in CO Direct Esterification Reaction

Strong metal-support interaction is crucial to the stability of catalysts in heterogeneous catalysis. However, reports on boosting interfacial electron transfer between metal and support via defect induction for enhanced metal-support interaction are limited. In this work, ultrathin reducible ZnTi-layered double hydroxide (LDH) nanosheets with rich oxygen defects were synthesized to stabilize Pd clusters, and the rich oxygen defects promoted Pd cluster bonding with Zn and Ti atoms in supports, thereby forming a metal-metal bond. Electron spin resonance (ESR), X-ray absorption fine spectra (XAFS), and density functional theory (DFT) calculations demonstrate remarkable interfacial electron transfer (0.62 e). The Pd/ZnTi-LDH catalyst shows superior catalytic stability for CO direct esterification to dimethyl oxalate. By contrast, the nonreducible Pd/ZnAl-LDH catalyst with a few oxygen defects shows minimal interfacial electron transfer (0.08 e), which leads to relatively poor catalytic stability. This work provides a deep insight into promoting the stability of catalysts by boosting interfacial electron transfer via defect induction.

Three Resorcin[4]arene-Based Two-Dimensional Zn(II) Supramolecular Isomers Synthesized via a Structure-Directing Strategy for Knoevenagel Condensation

Herein, in the presence of three structure-directing agents (SDAs), a family of imidazole-functionalized resorcin[4]arene-based coordination polymers (CPs), [Zn(TIC4R)(HCOO)]·HCOO·0.5DMF·1.5H₂O (1), [Zn(TIC4R)(CN)]·HCOO·DMF·2.5H₂O (2), and [Zn(TIC4R)(H₂O)]·2HCOO·2H₂O (3), were assembled under solvothermal conditions [TIC4R = tetra(imidazole) resorcin[4]arene]. 1 exhibits a double-layer structure with rectangle windows, and 2 and 3 display monolayer structures. The layers of CPs 2 and 3 are slides with different offsets along the a-axis. In addition, three CPs were used as catalysts to catalyze Knoevenagel condensations. Strikingly, all CPs exhibit remarkable catalytic performance for several substrates. To the best of our knowledge, this is the first time that a small organic acid as SDA was used in the syntheses of resorcin[4]arene-based supramolecular isomers.

Recent Advances in the Engineering of Single-Atom Catalysts Through Metal-Organic Frameworks

This mini-review highlights some recent progress in the engineering of single-atom catalysts (SACs) through metal-organic frameworks (MOFs) and derivatives. The inherent molecular and chemical specificities within the MOFs and derivatives can offer stabilisation of the SACs with high atomic isolation and dispersion. As MOFs are often considered an infinite array of self-assembled molecular catalysts, specifically designed structures can provide further functionalities to suit the needs of different catalytic applications. In brief, we can divide the preparation approaches into three main categories: (1) fabrication onto functional groups of the ligands, (2) fabrication onto Lewis acid sites of nodal centres, and (3) synthesis via a pyrolysis-mediated technique. Through these approaches, strong metal-support interactions can be established to aid the fine-tuning of the catalytic properties. We also discuss how recent progress in the development of state-of-the-art microscopic, spectroscopic, and crystallographic techniques has enabled scientists to elucidate the structure-activity relationship.

Active metal single-sites based on metal–organic frameworks: construction and chemical prospects

Metal single-point is a novel and potential design strategy that has been applied for the development of metal organic frameworks.

Single-Atom Catalysts Supported by Crystalline Porous Materials: Views from the Inside

Single-atom catalysts (SACs) have recently emerged as an exciting system in heterogeneous catalysis showing outstanding performance in many catalytic reactions. Single-atom catalytic sites alone are not stable and thus require stabilization from substrates. Crystalline porous materials such as zeolites and metal-organic frameworks (MOFs) are excellent substrates for SACs, offering high stability with the potential to further enhance their performance due to synergistic effects. This review features recent work on the structure, electronic, and catalytic properties of zeolite and MOF-protected SACs, offering atomic-scale views from the "inside" thanks to the subatomic resolution of synchrotron X-ray absorption spectroscopy (XAS). The extended X-ray absorption fine structure and associated methods will be shown to be powerful tools in identifying the single-atom site and can provide details into the coordination environment and bonding disorder of SACs. The X-ray absorption near-edge structure will be demonstrated as a valuable method in probing the electronic properties of SACs by analyzing the white line intensity, absorption edge shift, and pre-/postedge features. Emphasis is also placed on in situ/operando XAS using state-of-the-art equipment, which can unveil the changes in structure and properties of SACs during the dynamic catalytic processes in a highly sensitive and time-resolved manner.

A "Thermodynamically Stable" 2D Nickel Metal-Organic Framework over a Wide pH Range with Scalable Preparation for Efficient C2 s over C1 Hydrocarbon Separations

The design and construction of "thermodynamically stable" metal-organic frameworks (MOFs) that can survive in liquid water, boiling water, and acidic/basic solutions over a wide pH range is highly desirable for many practical applications, especially adsorption-based gas separations with obvious scalable preparations. Herein, a new thermodynamically stable Ni MOF, {[Ni(L)(1,4-NDC)(H₂ O)₂ ]}_n (IITKGP-20; L=4,4'-azobispyridine; 1,4-NDC=1,4-naphthalene dicarboxylic acid; IITKGP stands for the Indian Institute of Technology Kharagpur), has been designed that displays moderate porosity with a BET surface area of 218 m²  g^-1 and micropores along the [10-1] direction. As an alternative to a cost-intensive, cryogenic, high-pressure distillation process for the separation of hydrocarbons, MOFs have recently shown promise for such separations. Thus, towards an application standpoint, this MOF exhibits a higher uptake of C₂ hydrocarbons over that of C₁ hydrocarbon under ambient conditions, with one of the highest selectivities based on the ideal adsorbed solution theory (IAST) method. A combination of two strategies (the presence of stronger metal-N coordination of the spacer and the hydrophobicity of the aromatic moiety of the organic ligand) possibly makes the framework highly robust, even stable in boiling water and over a wide range of pH 2-10, and represents the first example of a thermodynamically stable MOF displaying a 2D structural network. Moreover, this material is easily scalable by heating the reaction mixture at reflux overnight. Because such separations are performed in the presence of water vapor and acidic gases, there is a great need to explore thermodynamically stable MOFs that retain not only structural integrity, but also the porosity of the frameworks.

Zn2+ stabilized Pd clusters with enhanced covalent metal-support interaction via the formation of Pd-Zn bonds to promote catalytic thermal stability

Pd-Based heterogeneous catalysts have been demonstrated to be efficient in numerous heterogeneous reactions. However, the effect of the support resulting in covalent metal-support interaction (CMSI) has not been researched sufficiently. In this work, a Lewis base is modulated over MgAl-LDH to investigate the support effects and it is further loaded with Pd clusters to research the metal-support interactions. MgAl-LDH with ultra-low Pd loading (0.0779%) shows CO conversion (55.0%) and dimethyl oxalate (DMO) selectivity (93.7%) for CO oxidative coupling to DMO, which was gradually deactivated after evaluation for 20 h. To promote the stability of Pd/MgAl-LDH, Zn2+ ions were introduced into the MgAl-LDH support to strengthen the CMSI by forming Pd-Zn bonds, which further increased the adsorption energy of the Pd clusters on ZnMgAl-LDH, and this was verified by X-ray absorption fine structure (XAFS) measurements and density functional theory (DFT) calculations. The stability of the Pd/ZnMgAl-LDH catalyst could be maintained for at least 100 h. This work highlights that covalent metal-support interactions can be strengthened by forming new metal-metal bonds, which could be extended to other systems for the stabilization of noble metals over supports.

Metal-Organic Framework-Based Catalysts with Single Metal Sites

Metal-organic frameworks (MOFs) are a class of distinctive porous crystalline materials constructed by metal ions/clusters and organic linkers. Owing to their structural diversity, functional adjustability, and high surface area, different types of MOF-based single metal sites are well exploited, including coordinately unsaturated metal sites from metal nodes and metallolinkers, as well as active metal species immobilized to MOFs. Furthermore, controllable thermal transformation of MOFs can upgrade them to nanomaterials functionalized with active single-atom catalysts (SACs). These unique features of MOFs and their derivatives enable them to serve as a highly versatile platform for catalysis, which has actually been becoming a rapidly developing interdisciplinary research area. In this review, we overview the recent developments of catalysis at single metal sites in MOF-based materials with emphasis on their structures and applications for thermocatalysis, electrocatalysis, and photocatalysis. We also compare the results and summarize the major insights gained from the works in this review, providing the challenges and prospects in this emerging field.

Tubular metal organic frameworks from the curvature of 2D-honeycombed metal coordination

A tubular MOF with adequate active sites is prepared by the bending of metal-coordinated honeycombed frameworks via titration and shows fast catalytic kinetics with lower catalytic loading for CO2 conversion. The TON is observed to be 2300 and the corresponding TOF of up to 173 h-1 is achieved for the first time.

Organic synthesis of high added value molecules with MOF catalysts

Recent examples of organic synthesis of fine chemicals and pharmaceuticals in confined spaces of MOFs are highlighted and compared with silica-based ordered porous solids, such as zeolites or mesoporous (organo)silica. These heterogeneous catalysts offer the possibility of stabilizing the desired transition states and/or intermediates during organic transformations of functional groups and (C-C/C-N) bond forming steps towards the desired functional high added value molecular scaffolds. A short introduction on zeolites, mesoporous silica and metal-organic frameworks is followed by relevant applications in which confined active sites in the pores promote single or multi-step organic synthesis of industrially relevant molecules. A critical discussion on the catalytic performances of the different types of hybrid inorganic-organic catalysts in the synthesis of O- and N-containing acyclic and heterocyclic molecules has been presented.

Two coordination polymers constructed by 5-[(4-carboxyphenoxy)methyl]benzene-1,3-dicarboxylic acid and 2,2'-bipyridine: syntheses, structures and luminescence properties

Coordination polymers (CPs) have attracted increasing interest in recent years. In this work, two new CPs, namely poly[[aquabis(2,2'-bipyridine-κ²N,N'){μ₃-5-[(4-carboxylatophenoxy)methyl]benzene-1,3-dicarboxylato-κ⁴O¹,O^1':O³:O⁵}(μ-formato-κ³O:O,O')dicadmium(II)] monohydrate], {[Cd₂(C₁₆H₉O₇)(HCO₂)(C₁₀H₈N₂)₂(H₂O)]·H₂O}_n (1), and poly[[(2,2'-bipyridine-κ²N,N'){μ₃-5-[(4-carboxylphenoxy)methyl]benzene-1,3-dicarboxylato-κ⁴O¹,O^1':O³:O⁵}manganese(II)] sesquihydrate], {[Mn(C₁₆H₁₀O₇)(C₁₀H₈N₂)]·1.5H₂O}_n (2), have been prepared using the tricarboxylic acid 5-[(4-carboxyphenoxy)methyl]benzene-1,3-dicarboxylic acid and 2,2'-bipyridine under hydrothermal conditions. CP 1 displays a two-dimensional layer structure which is further extended into a three-dimensional (3D) supramolecular structure via intermolecular π-π interactions, while CP 2 shows a different 3D supramolecular structure extended from one-dimensional ladder chains by intermolecular π-π interactions. In addition, the solid-state luminescence spectra of 1 and 2 were studied at room temperature.