Boosting the Cell Harvesting Performance of Poly(di(ethylene glycol)methyl ether methacrylate) Cell Release Layers via Copolymerization of Photo- and Thermoresponsive Monomers

The performance of the cell-selective thermoresponsive poly(di(ethylene glycol)methyl ether methacrylate) (PDEGMA) cell harvest system is shown to be drastically enhanced by exploiting the combination of photoresponsive spiropyran derivates and PDEGMA in copolymerized brushes. The analysis of copolymerized 1'-(2-methacryloxyethyl)-3',3'-dimethyl-6-nitrospiro(2H-1-benzopyran-2,2'-indoline) (SPMA) (DEMGA) di(ethylene glycol)methyl ether methacrylate brushes revealed that a minor adjustment of the SPMA/DEGMA ratios results in a significant alternation of wettability as well as protein adsorption, when switching the temperature from 37 to 22 °C and alternately irradiating using different light wavelengths (from 530 to 365 nm). Thin P(SPMA-co-DEGMA) layers supported pancreatic tumor PaTu 8988t cells with high cell viability. Copolymer layers with 2.5% SPMA/DEGMA led to the highest efficiency of enzyme-free cell release with very good cell viability. The release is induced by cooling the cell culture medium to 22 °C and irradiating the surface with 365 nm light. Compared to neat PDEGMA, the P(SPMA-co-DEGMA) layers showed a threefold increase in the speed of the change of cell morphology of the attached cells and a >5 times increased fraction of detached cells, which underlines the potential of these dual responsive PDEGMA systems for optimized performance in the facile capture, culture, and release of different cell lines.

Possible Strategies to Reduce the Tumorigenic Risk of Reprogrammed Normal and Cancer Cells

The reprogramming of somatic cells to pluripotent stem cells has immense potential for use in regenerating or redeveloping tissues for transplantation, and the future application of this method is one of the most important research topics in regenerative medicine. These cells are generated from normal cells, adult stem cells, or neoplastic cancer cells. They express embryonic stem cell markers, such as OCT4, SOX2, and NANOG, and can differentiate into all tissue types in adults, both in vitro and in vivo. However, tumorigenicity, immunogenicity, and heterogeneity of cell populations may hamper the use of this method in medical therapeutics. The risk of cancer formation is dependent on mutations of these stemness genes during the transformation of pluripotent stem cells to cancer cells and on the alteration of the microenvironments of stem cell niches at genetic and epigenetic levels. Recent reports have shown that the generation of induced pluripotent stem cells (iPSCs) derived from human fibroblasts could be induced using chemicals, which is a safe, easy, and clinical-grade manufacturing strategy for modifying the cell fate of human cells required for regeneration therapies. This strategy is one of the future routes for the clinical application of reprogramming therapy. Therefore, this review highlights the recent progress in research focused on decreasing the tumorigenic risk of iPSCs or iPSC-derived organoids and increasing the safety of iPSC cell preparation and their application for therapeutic benefits.

Mild Quantitative One Step Removal of Macrophages from Cocultures with Human Umbilical Vein Endothelial Cells Using Thermoresponsive Poly(Di(Ethylene Glycol)Methyl Ether Methacrylate) Brushes

The authors report on a mild, label-free, and fast method for the separation of human umbilical vein endothelial cells (HUVEC), which are relevant cells, whose use is not limited to studies of endothelial dysfunction, from cocultures with macrophages to afford HUVEC in ≈100% purity. Poly(di(ethylene glycol)methyl ether methacrylate) (PDEGMA) brushes with a dry thickness of (5 ± 1) nm afford the highly effective one-step separation by selective HUVEC detachment, which is based on the brushes' thermoresponsive behavior. Below the thermal transition at 32 °C the brushes swells and desorbs attached proteins, resulting in markedly decreased cell adhesion. Specifically, HUVEC and macrophages, which are differentiated from THP-1 monocytes, are seeded and attached to PDEGMA brushes at 37°C. After decreasing the temperature to 22°C, HUVEC shows a decrease in their cell area, while the macrophages are not markedly affected by the temperature change. After mild flushing with a cell culture medium, the HUVEC can be released from the surface and reseeded again with ≈100% purity on a new surface. With this selective cell separation and removal method, it is possible to separate and thereby purify HUVEC from macrophages without the use of any releasing reagent or expensive labels, such as antibodies.

On-Demand Cell Sheet Release with Low Density Peptide-Functionalized Non-LCST Polymer Brushes

Cell sheet harvesting offers a great potential for the development of new therapies for regenerative medicine. For cells to adhere onto surfaces, proliferate, and to be released on demand, thermoresponsive polymeric coatings are generally considered to be required. Herein, an alternative approach for the cell sheet harvesting and rapid release on demand is reported, circumventing the use of thermoresponsive materials. This approach is based on the end-group biofunctionalization of non-thermoresponsive and antifouling poly(2-hydroxyethyl methacrylate) (p(HEMA)) brushes with cell-adhesive peptide motifs. While the nonfunctionalized p(HEMA) surfaces are cell-repellant, ligation of cell-signaling ligand enables extensive attachment and proliferation of NIH 3T3 fibroblasts until the formation of a confluent cell layer. Remarkably, the formed cell sheets can be released from the surfaces by gentle rinsing with cell-culture medium. The release of the cells is found to be facilitated by low surface density of cell-adhesive peptides, as confirmed by X-ray photoelectron spectroscopy. Additionally, the developed system affords possibility for repeated cell seeding, proliferation, and release on previously used substrates without any additional pretreatment steps. This new approach represents an alternative to thermally triggered cell-sheet harvesting platforms, offering possibility of capture and proliferation of various rare cell lines via appropriate selection of the cell-adhesive ligand.

Adhesion, proliferation and detachment of various cell types on thermoresponsive microgel coatings

Cutting-edge biomedical applications require increasingly complex and fastidious cell systems, for example, various classes of primary or stem cells. Their cultivation, however, still differs little from 30 years ago. This especially applies to the use of indiscriminative proteases for non-specific cell detachment. A far more gentle alternative changes the adhesive properties of the cell culture substrates through coatings based on thermoresponsive polymers. Such polymers mediate cell adhesion at 3 7 ∘ C, but become repulsive upon a cell-compatible temperature drop to e.g. 3 2 ∘ C. While the high functionality of this method has already been well proven, it must also be easy and reproducible to apply. Here, we emphasize the potential of standard cell culture materials coated by spraying with thermoresponsive microgels for routine cultivation and beyond. On these surfaces, we successfully cultivated and detached various cell types, including induced pluripotent stem cells (iPS-cells) and cells in serum-free culture on. In addition, we evaluated the compatibility of the microgel-sprayed surfaces with adhesion-promoting proteins, which are essential for e.g. stem cells or neuronal cells. Finally, we demonstrate that the microgel surfaces do not impair proliferation and show their long-term stability. We conclude that for cell detachment, thermoresponsive cell culture substrates can fully substitute proteases, like trypsin, by employing a comparably straightforward protocol that is compatible with many industrial processing lines. This article is protected by copyright. All rights reserved.

Tumorigenicity Risk of iPSCs in vivo: Nip it in the Bud

In 2006, Takahashi and Yamanaka first created induced pluripotent stem cells from mouse fibroblasts via the retroviral introduction of genes encoding the transcription factors Oct3/4, Sox2, Klf44, and c-Myc. Since then, the future clinical application of somatic cell reprogramming technology has become an attractive research topic in the field of regenerative medicine. Of note, considerable interest has been placed in circumventing ethical issues linked to embryonic stem cell research. However, tumorigenicity, immunogenicity, and heterogeneity may hamper attempts to deploy this technology therapeutically. This review highlights the progress aimed at reducing induced pluripotent stem cells tumorigenicity risk and how to assess the safety of induced pluripotent stem cells cell therapy products.

Molecular bases for temperature sensitivity in supramolecular assemblies and their applications as thermoresponsive soft materials

Thermoresponsive supramolecular assemblies have been extensively explored in diverse formats, from injectable hydrogels to nanoscale carriers, for a variety of applications including drug delivery, tissue engineering and thermo-controlled catalysis. Understanding the molecular bases behind thermal sensitivity of materials is fundamentally important for the rational design of assemblies with optimal combination of properties and predictable tunability for specific applications. In this review, we summarize the recent advances in this area with a specific focus on the parameters and factors that influence thermoresponsive properties of soft materials. We summarize and analyze the effects of structures and architectures of molecules, hydrophilic and lipophilic balance, concentration, components and external additives upon the thermoresponsiveness of the corresponding molecular assemblies.

Downstream bioprocessing of human pluripotent stem cell‐derived therapeutics

With the advancement in lineage‐specific differentiation from human pluripotent stem cells (hPSCs), downstream cell separation has now become a critical step to produce hPSC‐derived products. Since differentiation procedures usually result in a heterogeneous cell population, cell separation needs to be performed either to enrich the desired cell population or remove the undesired cell population. This article summarizes recent advances in separation processes for hPSC‐derived cells, including the standard separation technologies, such as magnetic‐activated cell sorting, as well as the novel separation strategies, such as those based on adhesion strength and metabolic flux. Specifically, the downstream bioprocessing flow and the identification of surface markers for various cell lineages are discussed. While challenges remain for large‐scale downstream bioprocessing of hPSC‐derived cells, the rational quality‐by‐design approach should be implemented to enhance the understanding of the relationship between process and the product and to ensure the safety of the produced cells.

Drug Release from Thermo-Responsive Polymer Brush Coatings to Control Bacterial Colonization and Biofilm Growth on Titanium Implants

Despite decades of biomedical advances, the colonization of implant devices with bacterial biofilms is still a leading cause of implant failure. Clearly, new strategies and materials that suppress both initial and later stage bacterial colonization are required in this context. Ideal would be the implementation of a bactericidal functionality in the implants that is temporally and spatially triggered in an autonomous fashion at the infection site. Herein, the fabrication and validation of functional titanium-based implants with triggered antibiotic release function afforded via an intelligent polymer coating is reported. In particular, thermo-responsive poly(di(ethylene glycol) methyl ether methacrylate) (PDEGMA) brushes on titanium implants synthesized via a surface-initiated atom transfer radical polymerization with activators regenerated through the electron transfer technique (ARGET ATRP) allows for a controlled and thermally triggered release of the antibiotic levofloxacin at the wound site. Antibiotic loaded brushes are investigated as a function of thickness, loading capacity for antibiotics, and temperature. At temperatures of the infection site >37 °C the lower critical solution temperature behavior of the brushes afforded the triggered release. Hence, in addition to the known antifouling effects, the PDEGMA coating ensured enhanced bactericidal effects, as demonstrated in initial in vivo tests with rodents infected with Staphylococcus aureus.

Selective capture and non-invasive release of cells using a thermoresponsive polymer brush with affinity peptides

Thermoresponsive block copolymer brush with cell affinity peptides was prepared via two steps of ATRP and subsequent click reaction. The prepared polymer brush can purify cells with high selectivity by simply changing temperature.