Spontaneously Regenerative Tough Hydrogels

Innovative Acrylic Resin-Hydrogel Double-Layer Coating: Achieving Dual-Anchoring, Enhanced Adhesion, and Superior Anti-Biofouling Properties for Marine Applications

Traditional anti-corrosion and anti-fouling coatings struggle against the harsh marine environment. Our study tackled this by introducing a novel dual-layer hydrogel (A-H DL) coating system. This system combined a Cu2O-SiO2-acrylic resin primer for anchoring and controlled copper ion release with a dissipative double-network double-anchored hydrogel (DNDAH) boasting superior mechanical strength and anti-biofouling performance. An acrylamide monomer was copolymerized and cross-linked with a coupling agent to form the first irreversible network and first anchoring, providing the DNDAH coating with mechanical strength and structural stability. Alginate gel microspheres (AGMs) grafted with the same coupling agent formed the second reversible network and second anchoring, while coordinating with Cu2+ released from the primer to form a system buffering Cu2+ release, enabling long-term antibacterial protection and self-healing capabilities. FTIR, SEM, TEM, and elemental analyses confirmed the composition, morphology, and copper distribution within the A-H DL coating. A marine simulation experiment demonstrated exceptional stability and anti-fouling efficacy. This unique combination of features makes A-H DL a promising solution for diverse marine applications, from ship hulls to aquaculture equipment.

TEMPO bacterial cellulose and MXene nanosheets synergistically promote tough hydrogels for intelligent wearable human-machine interaction

Conductive hydrogels have received increasing attention in the field of wearable electronics, but they also face many challenges such as temperature tolerance, biocompatibility, and stability of mechanical properties. In this paper, a double network hydrogel of MXene/TEMPO bacterial cellulose (TOBC) system is proposed. Through solvent replacement, the hydrogel exhibits wide temperature tolerance (-20-60 °C) and stable mechanical properties. A large number of hydrogen bonds, MXene/TOBC dynamic three-dimensional network system, and micellar interactions endow the hydrogel with excellent mechanical properties (elongation at break ~2800 %, strength at break ~420 kPa) and self-healing ability. The introduction of tannic acid prevents the oxidation of MXene and the loss of electrical properties of the hydrogel. In addition, the sensor can also quickly (74 ms) and sensitive (gauge factor = 15.65) wirelessly monitor human motion, and the biocompatibility can well avoid the stimulation when it comes into contact with the human body. This series of research work reveals the fabrication of MXene-like flexible wearable electronic devices based on self-healing, good cell compatibility, high sensitivity, wide temperature tolerance and durability, which can be used in smart wearable, wireless monitoring, human-machine Interaction and other aspects show great application potential.

A Self-Assembly Pro-Coagulant Powder Capable of Rapid Gelling Transformation and Wet Adhesion for the Efficient Control of Non-Compressible Hemorrhage

Rapid and effective control of non-compressible massive hemorrhage poses a great challenge in first-aid and clinical settings. Herein, a biopolymer-based powder is developed for the control of non-compressible hemorrhage. The powder is designed to facilitate rapid hemostasis by its excellent hydrophilicity, great specific surface area, and adaptability to the shape of wound, enabling it to rapidly absorb fluid from the wound. Specifically, the powder can undergo sequential cross-linking based on "click" chemistry and Schiff base reaction upon contact with the blood, leading to rapid self-gelling. It also exhibits robust tissue adhesion through covalent/non-covalent interactions with the tissues (adhesive strength: 89.57 ± 6.62 KPa, which is 3.75 times that of fibrin glue). Collectively, this material leverages the fortes of powder and hydrogel. Experiments with animal models for severe bleeding have shown that it can reduce the blood loss by 48.9%. Studies on the hemostatic mechanism also revealed that, apart from its physical sealing effect, the powder can enhance blood cell adhesion, capture fibrinogen, and synergistically induce the formation of fibrin networks. Taken together, this hemostatic powder has the advantages for convenient preparation, sprayable use, and reliable hemostatic effect, conferring it with a great potential for the control of non-compressible hemorrhage.

Lignosulfonate sodium and ionic liquid synergistically promote tough hydrogels for intelligent wearable human-machine interaction

Flexible wearable devices are garnering significant interest, with conductive hydrogels emerging as a particularly notable category. While many of these hydrogels offer impressive conductivity, they often lack the innate ability to adhere autonomously to human skin. The ideal hydrogel should possess both superior adhesion properties and a wide responsive range. This study introduces a novel double-network conductive hydrogel, synthesized from lignosulfonate sodium and ionic liquid using a one-pot method. The gel's mechanical robustness (fracture elongation of ∼3500 % and tensile strength of ∼130 kPa) and exceptional conductivity sensing performance arise from the synergistic effects of electrostatic interactions, dynamic hydrogen bonding, and a three-dimensional network structure. Additionally, the phenolic hydroxyl and sulfonic groups from lignosulfonate sodium imbue the hydrogel with adhesive qualities, allowing it to easily bond with varied material surfaces. This hydrogel excels in human physiological signal detection and wireless monitoring, demonstrating a rapid response time (149 ms) and high sensitivity (a maximum gauge factor of 10.9 for strains between 400 and 600 %). Given these properties, the flexible, self-adhesive, and conductive hydrogel showcases immense promise for future applications in wearable devices and wireless transmission sensing.

Novel self-healing and recyclable fire-retardant polyvinyl alcohol/borax hydrogel coatings for the fire safety of rigid polyurethane foam

Rigid polyurethane foam (RPUF) has attracted great attention as an insulation material, but its inherent flammability restricts its practical application. Developing a sustainable fire-retardant strategy that can improve its fire safety is particularly desirable and challenging. Herein, novel fire-retardant hydrogel coatings based on polyvinyl alcohol (PVA) and borax are proposed and applied in RPUF, and the self-healing, recyclability and flame retardant properties of the coatings are investigated. The dynamic and reversible cross-linked networks based on the borate ester bonds and hydrogen bonds endow the hydrogels with excellent repairability, recyclability, and elasticity. Compared with a neat RUPF, the coated RPUF exhibited improved fire-retardant properties without the inherent advantages being influenced and can be reflected by the 8% increase in the limiting oxygen index (LOI), 20% reduction in total heat release (THR), and 25% decrease in total smoke production (TSP) with the coatings, along with a rapid self-quenching behavior. The novel hydrogel coatings provide a new strategy for the development of flame-retardant coatings, demonstrating the potential of the next generation of self-healing hydrogel coatings to reduce the fire risk of the RPUF.

Free-flowing, self-crosslinking, carboxymethyl starch and carboxymethyl cellulose microgels, as smart hydrogel dressings for wound repair

Hydrogels are widely recognized and favoured as moist wound dressings due to their beneficial properties. However, their limited capacity to absorb fluids restricts their use in highly exuding wounds. Microgels are small sized hydrogels that have recently gained considerable attention in drug delivery applications due to their superior swelling behaviour and ease of application. In this study, we introduce dehydrated microgel particles (μGeld) that rapidly swell and interconnect, forming an integrated hydrogel when exposed to fluid. These free-flowing microgel particles, derived from the interaction of carboxymethylated forms of starch and cellulose, have been designed to significantly absorb fluid and release silver nanoparticles in order to effectively control infection. Studies using simulated wound models validated the microgels ability to efficiently regulate the wound exudate and create a moist environment. While the biocompatibility and hemocompatibility studies confirmed the safety of the μGel particles, its haemostatic property was established using relevant models. Furthermore, the promising results from a full-thickness wounds in rats have highlighted the enhanced healing potential of the microgel particles. These findings suggest that the dehydrated microgels can evolve as a new class of smart wound dressings.

Phase-separation facilitated one-step fabrication of multiscale heterogeneous two-aqueous-phase gel

Engineering heterogeneous hydrogels with distinct phases at various lengths, which resemble biological tissues with high complexity, remains challenging by existing fabricating techniques that require complicated procedures and are often only applicable at bulk scales. Here, inspired by ubiquitous phase separation phenomena in biology, we present a one-step fabrication method based on aqueous phase separation to construct two-aqueous-phase gels that comprise multiple phases with distinct physicochemical properties. The gels fabricated by this approach exhibit enhanced interfacial mechanics compared with their counterparts obtained from conventional layer-by-layer methods. Moreover, two-aqueous-phase gels with programmable structures and tunable physicochemical properties can be conveniently constructed by adjusting the polymer constituents, gelation conditions, and combining different fabrication techniques, such as 3D-printing. The versatility of our approach is demonstrated by mimicking the key features of several biological architectures at different lengths: macroscale muscle-tendon connections; mesoscale cell patterning; microscale molecular compartmentalization. The present work advances the fabrication approach for designing heterogeneous multifunctional materials for various technological and biomedical applications.

Regenerative antibacterial hydrogels from medicinal molecule for diabetic wound repair

Hydrogel products for chronic diabetic wounds, a serious and prevalent complication of diabetes, show limited effects on disability and remain nonspecific. Thus, improvements in the usage of pharmaceutical molecule in the hydrogels are highly desirable to increase the therapeutic effect of hydrogels. In this study, thioctic acid (a common medicine molecule in diabetes treatment) is used for preparing regenerative antibacterial hydrogels (RAH) which contains in situ synthesized silver nanoparticles (AgNPs). The RAH shows regenerative, self-healing and injectable ability, because of the reversible hydrogen and coordination bonds. With good regenerative capacity, RAH can be stored as powder to avoid the water loss and facilitate storage availability. Owing to the antioxidant properties of thioctic acid, the RAH can decrease the oxidative damage and retain cell proliferation efficiency. Due to the in situ synthesized AgNPs, the RAH also exhibits extraordinary antimicrobial capacities against MDR bacteria. All of these superiorities enable RAH to be a promising therapy for chronic diabetic wounds.

COCu: A Robust Self-Regenerative Hydrogel with Applicability as Both Hydrated Gel Dressing and Dry Suture for Seamless Tissue Fixation and Repair

Self-regenerative hydrogels have recently been developed, and represent a special type of self-healing hydrogels with the ability to restore a dehydrated hydrogel with physical damage. In this study, a self-regenerative hydrogel (COCu) based on two chitosan polymers assembled by slow-released Cu²⁺ is developed. The COCu hydrogel displays an excellent regeneration ability after being dehydrated and fractured. By simple hydration at room temperature, the fragments of the dehydrated gel fuse into one seamless whole, thereby preserving the mechanical properties and functionalities of the original hydrogel. The regeneration process can be conducted repeatedly after different methods of dehydration (natural volatilization, heat drying, lyophilization) and various modes of deconstruction (flakes, powder, lumpy sponge, etc.). Furthermore, the COCu hydrogel provides ultra-stretchability, and it can be stretched into thin (0.01-0.1 mm) filaments, which, when dried (dtCOCu), can be used as suture lines. Moreover, when used as a dry suture, it regenerates into the hydrogel in the presence of the tissue fluid, forming an excellent sealant to immobilize tissues and seamlessly seal wounds. The fast self-regeneration allows for its facile application as both a hydrated gel dressing and dry suture, and offers customized strategies for fixing and repair of different wounds in soft tissues.

Programmable Transient Supramolecular Chiral G-quadruplex Hydrogels via a Chemically Fueled Non-Equilibrium Self-assembly Strategy

The temporal and spatial control of natural systems has aroused great interest in the creation of synthetic mimics. Operating with boronic ester-based dynamic covalent chemistry and coupling it with an internal pH feedback system, herein, we developed a new chemically fueled reaction network to design non-equilibrium supramolecular chiral G-quadruplex hydrogels with programmable lifetime from minutes, to hours, to days, as well as high transparency and conductivity, excellent injectability and rapid self-healability. The cycle system can be controlled via in-situ kinetically-controlled formation and dissociation of dynamic boronic ester bonds between cis-diols of guanosine (G) and 5-fluorobenzoxaborole (B) under chemical fuels (KOH and 1,3-propanesultone), leading to the formation of a precipitate-solution-gel-precipitate cycle under non-equilibrium conditions. A combined experimental-computational approach revealed that the underlying mechanism of the non-equilibrium self-assembly involves aggregation and disaggregation of right-handed helical G-quadruplex superstructure. With consecutive cycles of fuel addition, the non-equilibrium system can be easily refueled at least 6 cycles without obvious loss in the rheological moduli of the transient hydrogels. The proposed dynamic boronic ester-based non-equilibrium self-assembly strategy offers a new option to design next-generation adaptive and interactive smart materials.

Strong underwater adhesion of injectable hydrogels triggered by diffusion of small molecules

It is challenging for injectable hydrogels to achieve high underwater adhesiveness. Based on this concern, we report a fully physically crosslinked injectable hydrogel composed of gelatin, tea polyphenols and urea, capable of realising smart adhesion to various materials, like glass and porcine skin, in diverse aqueous environments. The urea molecules are designed as crosslinking disruptors for interfering with the formation of hydrogen bonds in the hydrogel, therefore modulating its crosslinking density and mechanical properties such as tensile strength, toughness and adhesive strength. Triggered by physical diffusion of the urea molecules towards the surrounding liquid environment, the hydrogel can achieve efficient (∼10 s), self-strengthening and long-lasting (>2 weeks) underwater adhesion. Remarkably, for fresh porcine skin, the instantaneous underwater adhesive strength is 10.4 kPa whereas the peak strength is as high as 152.9 kPa with the aid of the self-strengthening effect. More interestingly, it can simultaneously form controllable underwater non-adhesive surfaces, regulated by changes in the diffusion-triggered local concentration of urea. Further, it is also biocompatible, antibacterial, biodegradable and 3D printable in water, which offers great convenience for various applications concerning smart interfacial adhesion, like biomedicine and flexible electronics. Likewise, the physical diffusion-mediated mechanism represents an innovative strategy for developing next-generation smart hydrogels.

Self-healing mechanism and bioelectrochemical interface properties of core-shell guanosine-borate hydrogels

The self-healing mechanism and bioelectrochemical interface properties of supramolecular gels have been rarely explored. In this context, we propose a constitutive "fibril-reorganization" model to reveal the self-healing mechanism of a series of core-shell structured guanosine-borate (GB) hydrogels and emphasize that interfibrillar interactions at the supramolecular polymer scale (G-quadruplex nanowires) drive the self-healing process of GB hydrogels. Structure-electrochemical sensing performance studies reveal that GB hydrogel nanofibers with relatively strong biomolecular affinity such as -SH modified GB hydrogel (GB-SH) show a high sensitivity of response and low limit of detection for tumour marker alpha-fetoprotein sensing (AFP; 0.076 pg mL^-1). Guanosine/ferroceneboronic acid (GB-Fc) hydrogel nanofibers with superior conductivity and redox activity display the widest linear detection range for AFP (0.0005-100 ng mL^-1). Structure-property correlations of GB hydrogels provide useful insight for the future design of advanced self-healing materials and electrochemical biosensors.

Dynamic cross-linking of an alginate-acrylamide tough hydrogel system: time-resolved in situ mapping of gel self-assembly

Hydrogels are a popular class of biomaterial that are used in a number of commercial applications (e.g.; contact lenses, drug delivery, and prophylactics). Alginate-based tough hydrogel systems, interpenetrated with acrylamide, reportedly form both ionic and covalent cross-links, giving rise to their remarkable mechanical properties. In this work, we explore the nature, onset and extent of such hybrid bonding interactions between the complementary networks in a model double-network alginate-acrylamide system, using a host of characterisation techniques (e.g.; FTIR, Raman, UV-vis, and fluorescence spectroscopies), in a time-resolved manner. Further, due to the similarity of bonding effects across many such complementary, interpenetrating hydrogel networks, the broad bonding interactions and mechanisms observed during gelation in this model system, are thought to be commonly replicated across alginate-based and broader double-network hydrogels, where both physical and chemical bonding effects are present. Analytical techniques followed real-time bond formation, environmental changes and re-organisational processes that occurred. Experiments broadly identified two phases of reaction; phase I where covalent interaction and physical entanglements predominate, and; phase II where ionic cross-linking effects are dominant. Contrary to past reports, ionic cross-linking occurred more favourably via mannuronate blocks of the alginate chain, initially. Evolution of such bonding interactions was also correlated with the developing tensile and compressive properties. These structure-property findings provide mechanistic insights and future synthetic intervention routes to manipulate the chemo-physico-mechanical properties of dynamically-forming tough hydrogel structures according to need (i.e.; durability, biocompatibility, adhesion, etc.), allowing expansion to a broader range of more physically and/or environmentally demanding biomaterials applications.

Particle packing into loose networks for tough and sticky composite gels

Hydrogel is an attractive material, but its application is limited due to its low mechanical strength. In this study, a tough composite gel could be prepared by synthesizing polymer particles within a polymer network having relatively loose cross-linking. Since the polymer network acts as a dispersion stabilizer during the synthesis of the hydrophobic polymer particles, a large amount of particles could be introduced into the gel without agglomeration. It was suggested that the high level of toughness was induced by the adsorption and desorption of the polymer chains on the surface of the finely packed particles. By using a stimuli-responsive polymer network, elasticity and plasticity of composite gels could be controlled in response to external stimuli, and adhesion on the gel surface could also be modulated.

A Regenerable Hydrogel Electrolyte for Flexible Supercapacitors

Easy regenerability of core components such as electrode and electrolyte is highly required in advanced electrochemical devices. This work reports a reliable, regenerable, and stretchable hydrogel electrolyte based on ionic bonds between polyacrylic acid (PAA) and polyallylamine (PAH). PAA-PAH electrolyte (1M LiCl addition) exhibits high ionic conductivity (0.050 S·cm-1) and excellent mechanical property (fracture strain of 1,688%). Notably, the electrolyte can be regenerated to any desired shape under mild conditions and remains 96% and 90% of the initial ionic conductivity after the first and second regeneration, respectively. PAA-PAH/LiCl-based supercapacitor exhibits nearly 100% capacitance retention upon rolling, stretching, and 5,000 charge-discharge cycles, whereas the regenerated device holds 97.6% capacitance of the initial device and 90.9% after 5,000 cycles. This low-cost, high-efficiency, and regenerable hydrogel electrolyte reveals very promising use in solid-state/flexible supercapacitors and possibly becomes a standard commercial hydrogel electrolyte for sustainable electrochemical energy devices.

Emerging aqueous two-phase systems: from fundamentals of interfaces to biomedical applications

This review summarizes recent advances of aqueous two-phase systems (ATPSs), particularly their interfaces, with a focus on biomedical applications.