Modulation versus Templating: Fine‐Tuning of Hierarchally Porous PCN‐250 Using Fatty Acids To Engineer Guest Adsorption

Prediction of adsorption performance of ZIF-67 for malachite green based on artificial neural network using L-BFGS algorithm

Given the necessity and urgency in removing organic pollutants such as malachite green (MG) from the environment, it is vital to screen high-capacity adsorbents using artificial neural network (ANN) methods quickly and accurately. In this study, a series of ZIF-67 were synthesized, which adsorption properties for organic pollutants, especially MG, were systematically evaluated and determined as 241.720 mg g-1 (25 ℃, 2 h). The adsorption process was more consistent with pseudo-second-order kinetics and Langmuir adsorption isotherm, which correlation coefficients were 0.995 and 0.997, respectively. The chemisorption mechanism was considered to be π-π stacking interaction between imidazole and aromatic ring. Then, a Python-based neural network model using the Limited-memory BFGS algorithm was constructed by collecting the crucial structural parameters of ZIF-67 and the experimental data of batch adsorption. The model, optimized extensively, outperformed similar Matlab-based ANN with a coefficient of determination of 0.9882 and mean square error of 0.0009 in predicting ZIF-67 adsorption of MG. Furthermore, the model demonstrated a good generalization ability in the predictive training of other organic pollutants. In brief, ANN was successfully separated from the Matlab platform, providing a robust framework for high-precision prediction of organic pollutants and guiding the synthesis of adsorbents.

Rapid and large-capacity adsorption of heterocyclic aromatic amines on heat resistant two-dimensional metal organic layer/cellulose nanofiber aerogels constructed by a thawing cross-linking strategy

Composite aerogels, formed by the combination of nanoscale polymers and highly efficient adsorbents, offer the potential to deploy adsorbent distinct separation properties into a processable matrix. This paper presents a method for the fabrication of low energy bio-aerogels with high ductility, excellent wet strength and favorable heat resistance, based on cellulose nanofibers (CNFs) bound by calcium carbonate particles (CaCO3) via a simple process of ice induction, cross-linking during freezing and freeze-drying. Due to induced defects, two-dimensional metal-organic layers (MOLs) were rich in mesoporous structure and embedded in the aerogel (AGCa-MOL), which exhibited a powerful adsorption capacity. AGCa-MOL could take full advantage of their hierarchical pores and available surface area to obtain high adsorption capacity (0.694-5.470 μmol/g) and rapid adsorption kinetics (5 min) for 14 heterocyclic aromatic amines (HAAs). Moreover, the CaCO3 particles and MOLs gave the AGCa-MOL excellent thermal stability, so that it could maintain excellent adsorption capacity at a high temperature (100 °C) and be applied as an adsorbent to remove HAAs in the boiling marinade. The intrinsic potential of composite aerogels was revealed due to the synergistic properties of the various components in the composite aerogel.

Recent Advances in Hierarchical Porous Engineering of MOFs and Their Derived Materials for Catalytic and Battery: Methods and Application

Hierarchical porous materials have attracted the attention of researchers due to their enormous specific surface area, maximized active site utilization efficiency, and unique structure and properties. In this context, metal-organic frameworks (MOFs) offer a unique mix of properties that make them particularly appealing as tunable porous substrates containing highly active sites. This review focuses on recent advances in the types and synthetic strategies of hierarchical porous MOFs and their derived materials. Furthermore, it highlights the relationship between the mass diffusion and transport of hierarchical porous structures and the pore size with examples and simulations, while identifying their potential and limitations. On this basis, how the synthesis conditions affect the structure and electrochemical properties of MOFs based hierarchical porous materials with different structures is discussed, highlighting the prospects and challenges for the synthetization, as well as further scientific research and practical applications. Finally, some insights into current research and future design ideas for advanced MOFs based hierarchical porous materials are presented.

Fe-MOF Catalytic Nanoarchitectonic toward Electrochemical Ammonia Production

Electrochemical reduction of nitrate into ammonia has lately been identified as one among the promising solutions to address the challenges triggered by the growing global energy demand. Exploring newer electrocatalyst materials is vital to make this process effective and feasible. Recently, metal-organic framework (MOF)-based catalysts are being well investigated for electrocatalytic ammonia synthesis, accounting for their enhanced structural and compositional integrity during catalytic reduction reactions. In this study, we investigate the ability of the PCN-250-Fe3 MOF toward ammonia production in its pristine and activated forms. The activated MOF catalyst delivered a faradaic efficiency of about 90% at -1 V vs RHE and a yield rate of 2.5 × 10-4 mol cm-2 h-1, while the pristine catalyst delivered a 60% faradaic efficiency at the same potential. Theoretical studies further provide insights into the nitrate reduction reaction mechanism catalyzed by the PCN-250-Fe3 MOF catalyst. In short, simpler and cost-effective strategies such as pretreatment of electrocatalysts have an upper hand in aggravating the intrinsic material properties, for catalytic applications, when compared to conventional material modification approaches.

Creating hierarchical pores in metal-organic frameworks via postsynthetic reactions

Metal-organic frameworks (MOFs) demonstrate promise for a multitude of applications owing to their high porosity and surface area. However, the majority of conventional MOFs possess only micropores with very limited accessibility to substances larger than 2 nm-especially functional biomacromolecules like some proteins. It is challenging to create an appropriately large pore size while avoiding framework collapse in MOFs. Herein, we present the generation of mesopores in microporous MOFs through three facile and effective techniques, namely Soxhlet washing, linker hydrolysis and linker thermolysis. These postsynthetic elimination approaches have been applied in selected MOFs, including PCN-250, PCN-160 and UiO-66, and controllably generate MOFs with hierarchical pores and high stability. Our work demonstrates reproducible and straightforward methods resulting in hierarchically porous materials that possess the benefits of mesoporosity while borrowing the robustness of a micropore framework. All the procedures can be conducted reliably at a multigram scale and operation time less than 6 h, representing a significant effort in the field of MOF synthesis. These hierarchically porous MOFs show great promise in a wide range of applications as efficient adsorbents, catalysts and drug carriers.

Synthesis and Biomedical Applications of Highly Porous Metal-Organic Frameworks

In this review, aspects of the synthesis, framework topologies, and biomedical applications of highly porous metal-organic frameworks are discussed. The term "highly porous metal-organic frameworks" (HPMOFs) is used to denote MOFs with a surface area larger than 4000 m² g^-1. Such compounds are suitable for the encapsulation of a variety of large guest molecules, ranging from organic dyes to drugs and proteins, and hence they can address major contemporary challenges in the environmental and biomedical field. Numerous synthetic approaches towards HPMOFs have been developed and discussed herein. Attempts are made to categorise the most successful synthetic strategies; however, these are often not independent from each other, and a combination of different parameters is required to be thoroughly considered for the synthesis of stable HPMOFs. The majority of the HPMOFs in this review are of special interest not only because of their high porosity and fascinating structures, but also due to their capability to encapsulate and deliver drugs, proteins, enzymes, genes, or cells; hence, they are excellent candidates in biomedical applications that involve drug delivery, enzyme immobilisation, gene targeting, etc. The encapsulation strategies are described, and the MOFs are categorised according to the type of biomolecule they are able to encapsulate. The research field of HPMOFs has witnessed tremendous development recently. Their intriguing features and potential applications attract researchers' interest and promise an auspicious future for this class of highly porous materials.

Mechanistic Principles for Engineering Hierarchical Porous Metal-Organic Frameworks

Metal-organic frameworks (MOFs) have generated tremendous research interest in the past two decades, due to their high surface areas, tailorable active sites, and tunable structures. Hierarchical porous MOFs (HP-MOFs) with two or more pore systems are particularly attractive, benefiting from improved active site accessibility and enhanced mass diffusivity in applications involving bulk molecules. This review outlines the mechanistic principles used for the rational design of HP-MOFs, current techniques used to measure their hierarchical porosities, as well as their emerging applications. We then critically summarize the current challenges in this field and provide a contemporary perspective on the technological innovations that would address current synthetic challenges in the field of HP-MOFs. The aim of this review is to provide an in-depth understanding of the formation mechanisms, materials chemistry, and structural and chemical properties of HP-MOFs while exploring ways to enhance the performance of current MOF materials in a range of fields.

A well-defined hierarchically porous metal-organic framework and its application in separation and purification of steviol glycosides

The separation and removal of stevioside from natural product steviol glycosides to obtain high-purity rebaudioside A is of great significance for the application of steviol glycosides in food, medicine and other fields. Here, in order to explore the adsorbent pore structure suitable for the separation of stevioside and rebaudioside A, a hierarchically porous amino-functionalized metal-organic framework (HP-NH₂ -MIL-53) with an appropriate and narrow pore size distribution was prepared using a modulator induced defect-formation strategy. The results showed that the hierarchically porous structure with micropores and mesopores increased the specific surface area and exposed amino groups compared with original metal organic framework (NH₂ -MIL-53), and the maximum adsorption capacity of HP-NH₂ -MIL-53 for stevioside and rebaudioside A was 233.89 mg/g. The narrow pore size distribution close to 3.80 nm promoted the screening effect, resulting in a maximum adsorption selectivity of 4.13. This work proves that when the pore size of the adsorbent is between 1.41-3.80 nm, it has a certain pore size screening effect on stevioside and rebaudioside A, and the hierarchically porous metal-organic frameworks provide a pre-design idea of adsorbent structure for the separation of natural products with molecular weight of 800-1000 Da. This article is protected by copyright. All rights reserved.

Modulation of Hierarchical Pores in Metal-Organic Frameworks for Improved Dye Adsorption and Electrocatalytic Performance

The hierarchical porous metal-organic framework (HP-MOF) has emerged as a hot topic in porous materials in consideration of their advantages in storage capacity and catalysis performance. Herein, we report the construction and property investigation of a series of HP-MOFs. A series of isoreticular microporous MOFs featuring the pacs topology network based on 2,4,6-tris(4-pyridyl)-1,3,5-triazine and different carboxylic acid ligands are found to be potential precursors to construct HP-MOFs. Through the decarboxylation of carboxylate ligands at high temperatures, a hierarchical porous structure could be obtained with the reservation of a crystalline framework. The formation of hierarchical pores is highly dependent on the structural and component nature (carboxylate ligands and metal centers) of the pristine MOF and the pyrolysis conditions (temperature and treatment time), indicating the highly tunable hierarchical pore characteristic of the HP-MOFs. By taking advantage of the increased pore volume and more exposed activation sites, the HP-MOFs reveal enhanced anionic dye adsorption capacity (800 mg·g^-1 for Congo red and 140 mg·g^-1 for methyl blue) and catalytic activity toward electrocatalytic oxygen reduction reaction (overpotential of 0.302 V at a current density of 10 mA·cm^-2, 51 mV lower than that of the pristine MOF).

Defect-Rich Hierarchical Porous UiO-66(Zr) for Tunable Phosphate Removal

The introduction of defects into hierarchical porous metal-organic frameworks (HP-MOFs) is of vital significance to boost their adsorption performance. Herein, an advanced template-assisted strategy has been developed to fine-tune the phosphate adsorption performance of HP-MOFs by dictating the type and number of defects in HP-UiO-66(Zr). To achieve this, monocarboxylic acids of varying chain lengths have been employed as template molecules to fabricate an array of defect-rich HP-UiO-66(Zr) derivatives following removal of the template. The as-prepared HP-UiO-66(Zr) exhibits a higher sorption capacity and faster sorption rate compared to the pristine UiO-66(Zr). Particularly, the octanoic acid-modulated UiO-66(Zr) exhibits a high adsorption capacity of 186.6 mg P/g and an intraparticle diffusion rate of 6.19 mg/g·min^0.5, which are 4.8 times and 1.9 times higher than those of pristine UiO-66(Zr), respectively. The results reveal that defect sites play a critical role in boosting the phosphate uptake performance, which is further confirmed by various advanced characterizations. Density functional theory (DFT) calculations reveal the important role of defects in not only providing additional sorption sites but also reducing the sorption energy between HP-UiO-66(Zr) and phosphate. In addition, the hierarchical pores in HP-UiO-66(Zr) can accelerate the phosphate diffusion toward the active sorption sites. This work presents a promising route to tailor the adsorption performance of MOF-based adsorbents via defect engineering.

Surfactant-assisted synthesis of titanium nanoMOFs for thin film fabrication

We use dodecanoic acid as a modulator to yield titanium MOF nanoparticles with good control of size and colloid stability and minimum impact to the properties of the framework to enable direct fabrication of crystalline, porous thin films.

Large-Scale Production of Hierarchically Porous Metal-Organic Frameworks by a Reflux-Assisted Post-Synthetic Ligand Substitution Strategy

The mass production of hierarchically porous metal-organic frameworks (HP-MOFs) with adjustable morphology and size as well as retained crystallinity is highly desirable yet challenging. Herein, we have developed a versatile post-synthetic ligand substitution (PSLS) strategy to convert typical microporous MOFs and even their composites to HP-MOFs and their composites at a 10 g level and beyond in a simple reflux system. The resulting HP-MOFs feature intrinsic micropores and abundant defective mesopores, which greatly facilitate the transport and activation of large substrates for stable and efficient heterogeneous catalysis. Furthermore, the presence of defective mesopores in the HP-MOF composites improves activity and selectivity for large molecule-involved one-pot tandem catalysis. This strategy opens a new door to fast, facile, general, and scale-up production of HP-MOFs and related composites for expanding applications of conventional microporous MOF-based materials.

Metal-Organic Framework-Based Hierarchically Porous Materials: Synthesis and Applications

Metal-organic frameworks (MOFs) have been widely recognized as one of the most fascinating classes of materials from science and engineering perspectives, benefiting from their high porosity and well-defined and tailored structures and components at the atomic level. Although their intrinsic micropores endow size-selective capability and high surface area, etc., the narrow pores limit their applications toward diffusion-control and large-size species involved processes. In recent years, the construction of hierarchically porous MOFs (HP-MOFs), MOF-based hierarchically porous composites, and MOF-based hierarchically porous derivatives has captured widespread interest to extend the applications of conventional MOF-based materials. In this Review, the recent advances in the design, synthesis, and functional applications of MOF-based hierarchically porous materials are summarized. Their structural characters toward various applications, including catalysis, gas storage and separation, air filtration, sewage treatment, sensing and energy storage, have been demonstrated with typical reports. The comparison of HP-MOFs with traditional porous materials (e.g., zeolite, porous silica, carbons, metal oxides, and polymers), subsisting challenges, as well as future directions in this research field, are also indicated.

Simultaneous introduction of oxygen vacancies and hierarchical pores into titanium-based metal-organic framework for enhanced photocatalytic performance

Photo-generated radicals play an important role in photocatalytic reactions, yet numerous radicals undergo self-quenching before contact with the substrate because of their ultrafast lifetimes and limited diffusion distances, which decreases the utilization of free radicals and reduces the activity of photocatalysts. Herein, both hierarchical pores and oxygen vacancies (OVs) were successfully introduced into a titanium-based metal-organic framework (MOF), namely MIL-125-NH₂ (MIL for Materials of Institut Lavoisier), via a simple and controllable acid etching method. The generation of OVs increased the yield of photogenerated radicals, while the hierarchical pore structure conferred a pore enrichment effect, thus enhancing the utilization of photogenerated radicals. Owing to the synergistic effect of the hierarchical pores and OVs, the obtained single-crystal nanoreactor, H-MIL-125-NH₂-V_O, showed much higher catalytic activity for rhodamine (RhB) degradation than pristine MIL-125-NH₂. In fact, the rate constant for catalytic RhB degradation in H-MIL-125-NH₂-V_O was approximately eight times that of MIL-125-NH₂. This work highlights the significant contribution of both hierarchical pores and OVs to enhancing the photocatalytic performance of MOFs.

Defective Hierarchical Pore Engineering of a Zn-Ni MOF by Labile Coordination Bonding Modulation

The construction and modulation of hierarchical pore structure in metal-organic frameworks (MOFs) has become a hot topic owing to the advantages of hierarchical pore MOFs (HP-MOFs) in matter storage and mass transfer related applications. Herein, we report the engineering of crystalline defect in a bimetallic MOF for the construction and tuning of HP-MOF. A microporous MOF system showing metal-center-dependent water stability, namely, {[M₃F(bdc)₃ tpt] (solvents)}_n (M = Zn²⁺ and Ni²⁺, H₂bdc = 1,4-benzenedicarboxylic acid, tpt = 2,4,6-tris(4-pyridyl)triazine), was utilized as a platform for the construction of HP-MOF. By tuning the Zn²⁺/Ni²⁺ ratio in the reactant, a bimetallic MOF with a highly tunable Zn²⁺/Ni²⁺ ratio could be obtained. The relatively labile Zn²⁺-based coordination bonding in the bimetallic MOF could be readily and targeted broken through water treatment for the engineering of crystalline defects-based hierarchical pore structure. The resultant HP-MOF reveals a dramatically increased pore volume with the presence of mesopore and macropore. In addition, the anionic framework of HP-MOF could be utilized for the selective adsorption of a cationic dye methylene blue, and a relatively high capacity (250 mg·g^-1, five times compared with the pristine microporous MOF) could be achieved.

Template-free synthesis of hierarchical nanocrystal UiO-66 and its adsorption thermodynamics for n-heptane and methyl cyclohexane

NH₄OH can induce rapid crystallization of the precursors, whereas acetic acid can effectively stabilize such precursors and control the balance between nucleation and growth of UiO-66.

Rational morphology control of nano-scale amide decorated metal-organic frameworks by ultrasonic method: Capability to selective and sensitive detection of nitro explosives

One of the key challenges in rational design and synthesis of metal-organic frameworks (MOFs) is defined control over size and morphology for using these materials in many more advanced applications. Combining ultrasonic method and capping groups makes it possible to control the size and change the morphology of metal organic frameworks without changing material compositions. Nano TMU-46, 47 and 48 with copper metal center and amide functionalized pillar were synthesized by using ultrasonic irritation and characterized by FE-SEM, powder X-ray diffraction, elemental analysis, and FTIR spectroscopy. Sensing properties of these nano scale materials and the correlation between the nano structure and nitroaromatic compounds detection were studied. Nano TMU-46 due to its special and porous structure and available functional group show strong luminescence emission, which is selectively sensitive to Trinitrophenol (TNP) with a detection limit of 10^-3 M. Furthermore, multiple morphological transition in the structure of these crystals were observed with using different modulators. This morphology transition, in fact, successfully led to significant change in sensing properties of this structure and decreased the detection limit to 10^-5 M.

Microscopic and Mesoscopic Dual Postsynthetic Modifications of Metal-Organic Frameworks

We report the dual postsynthetic modification (PSM) of a metal-organic framework (MOF) involving the microscopic conversion of C-H bonds into C-C bonds and the mesoscopic introduction of hierarchical porosity. MOF crystals underwent single-crystal-to-single-crystal transformations during the electrophilic aromatic substitution of Co₂ (m-DOBDC) (m-DOBDC^4- =4,6-dioxo-1,3-benzenedicarboxylate) with alkyl halides and formaldehyde. The steric hindrance caused by the proximity of the introduced functional groups to the coordination bonds reduced bond stability and facilitated the transformation into hierarchically porous mesostructures by etching with in situ generated protons (hydroniums) and halides. The numerous defect sites in the mesostructural MOFs are potential water-sorption sites. However, since the introduced functional groups are close to the main adsorption sites, even methyl groups are able to considerably decrease water adsorption, whereas hydroxy groups increase adsorption at low vapor pressures.

Effect of Isomorphic Metal Substitution on the Fenton and Photo-Fenton Degradation of Methylene Blue Using Fe-Based Metal-Organic Frameworks

The removal of toxic organic compounds (TOCs) using highly porous solids such as metal-organic frameworks (MOFs) has gained significant attention over the past decade. In this study, it has been demonstrated that the efficiency of PCN-250 as a heterogeneous catalyst porous coordination network (PCN) for both Fenton and photo-Fenton reactions can be improved by the isomorphic substitution of Mn and Co for Fe, while it can be inhibited by the substitution of Ni for Fe. Furthermore, the Mn-substituted sample named PCN-250(Fe₂Mn) decomposed 100% of methylene blue (MB) in solution in 300 min and displayed good recyclability over three cycles. This work establishes that the highly porous, commercially available, and robust family of MOFs named PCN-250 has the potential to be used as catalysts for Fenton and photo-Fenton reactions as well as broader advanced oxidation processes (AOP) for water purification applications. Overall, this work successfully demonstrates not only the ability to perform isomorphic substitution of various metals within MOFs but also the effect of the substitution on the resulting catalytic performance.

The synthesis of metal-organic frameworks with template strategies

The synthesis of metal-organic frameworks (MOFs) with a template strategy is still fascinating and has received considerable attention from structural chemists. In this review, developments in tuning MOF hosts or pore structures with a template strategy in the past decades are summarized. By adding templates into MOF precursors, novel template@MOF materials can always be obtained, which cannot be accessed by traditional synthesis procedures. Template@MOF materials can be structurally characterized to help understand the interactions between host frameworks and guest templates. On the other hand, changing the species or amount of template may lead to a pore structure change that can be used as a molecular container to load functional guest molecules with matching sizes for specific applications. It is hoped that this review will provide future researchers with new insight into the design and synthesis of MOF materials by applying suitable templates.

Hierarchically porous metal–organic frameworks: synthetic strategies and applications

Despite numerous advantages, applications of conventional microporous metal–organic frameworks (MOFs) are hampered by their limited pore sizes, such as in heterogeneous catalysis and guest delivery, which usually involve large molecules. Construction of hierarchically porous MOFs (HP-MOFs) is vital to achieve the controllable augmentation of MOF pore size to mesopores or even macropores, which can enhance the diffusion kinetics of guests and improve the storage capacity. This review article focuses on recent advances in the methodology of HP-MOF synthesis, covering preparation of HP-MOFs with intrinsic hierarchical pores, and modulated, templated and template-free synthetic strategies for HP-MOFs. The key factors which affect the formation of HP-MOF architectures are summarized and discussed, followed by a brief review of their applications in heterogeneous catalysis and guest encapsulation. Overall, this review presents a roadmap that will guide the future design and development of HP-MOF materials with molecular precision and mesoscopic complexity.