Non‐metal Single‐Iodine‐Atom Electrocatalysts for the Hydrogen Evolution Reaction

Integrative catalytic pairs for efficient multi-intermediate catalysis

Single-atom catalysts (SACs) have attracted considerable research interest owing to their combined merits of homogeneous and heterogeneous catalysts. However, the uniform and isolated active sites of SACs fall short in catalysing complex chemical processes that simultaneously involve multiple intermediates. In this Review, we highlight an emerging class of catalysts with adjacent binary active centres, which is called integrative catalytic pairs (ICPs), showing not only atomic-scale site-to-site electronic interactions but also synergistic catalytic effects. Compared with SACs or their derivative dual-atom catalysts (DACs), multi-interactive intermediates on ICPs can overcome kinetic barriers, adjust reaction pathways and break the universal linear scaling relations as the smallest active units. Starting from this active-site design principle, each single active atom can be considered as a brick to further build integrative catalytic clusters (ICCs) with desirable configurations, towards trimer or even larger multi-atom units depending on the requirement of a given reaction.

Single Atom Catalysts Based on Earth-Abundant Metals for Energy-Related Applications

Anthropogenic activities related to population growth, economic development, technological advances, and changes in lifestyle and climate patterns result in a continuous increase in energy consumption. At the same time, the rare metal elements frequently deployed as catalysts in energy related processes are not only costly in view of their low natural abundance, but their availability is often further limited due to geopolitical reasons. Thus, electrochemical energy storage and conversion with earth-abundant metals, mainly in the form of single-atom catalysts (SACs), are highly relevant and timely technologies. In this review the application of earth-abundant SACs in electrochemical energy storage and electrocatalytic conversion of chemicals to fuels or products with high energy content is discussed. The oxygen reduction reaction is also appraised, which is primarily harnessed in fuel cell technologies and metal-air batteries. The coordination, active sites, and mechanistic aspects of transition metal SACs are analyzed for two-electron and four-electron reaction pathways. Further, the electrochemical water splitting with SACs toward green hydrogen fuel is discussed in terms of not only hydrogen evolution reaction but also oxygen evolution reaction. Similarly, the production of ammonia as a clean fuel via electrocatalytic nitrogen reduction reaction is portrayed, highlighting the potential of earth-abundant single metal species.

I Single-Atom Doped P-Rich CoPn Nanocluster@CoP with Enhanced HER

Constructing I single-atom (ISA) doped CoP electrocatalyst for HER is extremely challenging and has not been reported to date. Herein, an ISA doping-phosphatization strategy is proposed to prepare a novel I single-atom doped P-rich CoPn nanocluster@CoP electrocatalyst (ISA-CoPn/CoP) with enhanced HER performance first. ISA-CoPn/CoP shows a low overpotential of only 44 and 81 mV in 0.5 m H2SO4 solution, to drive a current density of 10 and 100 mA cm-2. ISA and P-rich CoPn nanocluster show unique synergies, which can optimize the H adsorption energy and accelerate the kinetics of HER in the CoP system. The intermediate I─H bond vibration peak is directly observed through in situ Raman testing, demonstrating that ISA doping helps accelerate the HER process. Additionally, the ΔGH of ISA-CoPn/CoP is only 0.05 eV by density functional theory (DFT) calculation, which is conducive to H2 evolution.

Precious Metal Free Hydrogen Evolution Catalyst Design and Application

The quest to identify precious metal free hydrogen evolution reaction catalysts has received unprecedented attention in the past decade. In this Review, we focus our attention to recent developments in precious metal free hydrogen evolution reactions in acidic and alkaline electrolyte owing to their relevance to commercial and near-commercial low-temperature electrolyzers. We provide a detailed review and critical analysis of catalyst activity and stability performance measurements and metrics commonly deployed in the literature, as well as review best practices for experimental measurements (both in half-cell three-electrode configurations and in two-electrode device testing). In particular, we discuss the transition from laboratory-scale hydrogen evolution reaction (HER) catalyst measurements to those in single cells, which is a critical aspect crucial for scaling up from laboratory to industrial settings but often overlooked. Furthermore, we review the numerous catalyst design strategies deployed across the precious metal free HER literature. Subsequently, we showcase some of the most commonly investigated families of precious metal free HER catalysts; molybdenum disulfide-based, transition metal phosphides, and transition metal carbides for acidic electrolyte; nickel molybdenum and transition metal phosphides for alkaline. This includes a comprehensive analysis comparing the HER activity between several families of materials highlighting the recent stagnation with regards to enhancing the intrinsic activity of precious metal free hydrogen evolution reaction catalysts. Finally, we summarize future directions and provide recommendations for the field in this area of electrocatalysis.

A non-metal single atom nanozyme for cutting off the energy and reducing power of tumors

Enzymes are considered safe and effective therapeutic tools for various diseases. With the increasing integration of biomedicine and nanotechnology, artificial nanozymes offer advanced controllability and functionality in medical design. However, several notable gaps, such as catalytic diversity, specificity and biosafety, still exist between nanozymes and their native counterparts. Here we report a non-metal single-selenium (Se)-atom nanozyme (SeSAE), which exhibits potent nicotinamide adenine dinucleotide phosphate (NADPH) oxidase-mimetic activity. This novel single atom nanozyme provides a safe alternative to conventional metal-based catalysts and effectively cuts off the cellular energy and reduction equivalents through its distinctive catalytic function in tumors. In this study, we have demonstrated the substantial efficacy of SeSAE as an antitumor nanomedicine across diverse mouse models without discernible systemic adverse effects. The mechanism of the NADPH oxidase-like activity of the non-metal SeSAE was rationalized by density functional theory calculations. Furthermore, comprehensive elucidation of the biological functions, cell death pathways, and metabolic remodeling effects of the nanozyme was conducted, aiming to provide valuable insights into the development of single atom nanozymes with clinical translation potential.

Understanding the Dynamic Aggregation in Single-Atom Catalysis

The dynamic response of single-atom catalysts to a reactive environment is an increasingly significant topic for understanding the reaction mechanism at the molecular level. In particular, single atoms may experience dynamic aggregation into clusters or nanoparticles driven by thermodynamic or kinetic factors. Herein, the inherent mechanistic nuances that determine the dynamic profile during the reaction will be uncovered, including the intrinsic stability and site-migration barrier of single atoms, external stimuli (temperature, voltage, and adsorbates), and the influence of catalyst support. Such dynamic aggregation can be beneficial or deleterious on the catalytic performance depending on the optimal initial state. Those examples will be highlighted where in situ formed clusters, rather than single atoms, serve as catalytically active sites for improved catalytic performance. This is followed by the introduction of operando techniques to understand the structural evolution. Finally, the emerging strategies via confinement and defect-engineering to regulate dynamic aggregation will be briefly discussed.

Correlating Single-Atomic Ruthenium Interdistance with Long-Range Interaction Boosts Hydrogen Evolution Reaction Kinetics

Correlated single-atom catalysts (c-SACs) with tailored intersite metal-metal interactions are superior to conventional catalysts with isolated metal sites. However, precise quantification of the single-atomic interdistance (SAD) in c-SACs is not yet achieved, which is essential for a crucial understanding and remarkable improvement of the correlated metal-site-governed catalytic reaction kinetics. Here, three Ru c-SACs are fabricated with precise SAD using a planar organometallic molecular design and π-π molecule-carbon nanotube confinement. This strategy results in graded SAD from 2.4 to 9.3 Å in the Ru c-SACs, wherein tailoring the Ru SAD into 7.0 Å generates an exceptionally high turnover frequency of 17.92 H2 s-1 and a remarkable mass activity of 100.4 A mg-1 under 50 and 100 mV overpotentials, respectively, which is superior to all the Ru-based catalysts reported previously. Furthermore, density functional theory calculations confirm that Ru SAD has a negative correlation with its d-band center owing to the long-range interactions induced by distinct local atomic geometries, resulting in an appropriate electrostatic potential and the highest catalytic activity on c-SACs with 7.0 Å Ru SAD. The present study promises an attractive methodology for experimentally quantifying the metal SAD to provide valuable insights into the catalytic mechanism of c-SACs.

Recent Tendency on Transition-Metal Phosphide Electrocatalysts for the Hydrogen Evolution Reaction in Alkaline Media

Hydrogen energy is regarded as an auspicious future substitute to replace fossil fuels, due to its environmentally friendly characteristics and high energy density. In the pursuit of clean hydrogen production, there has been a significant focus on the advancement of effective electrocatalysts for the process of water splitting. Although noble metals like Pt, Ru, Pd and Ir are superb electrocatalysts for the hydrogen evolution reaction (HER), they have limitations for large-scale applications, mainly high cost and low abundance. As a result, non-precious transition metals have emerged as promising candidates to replace their more expensive counterparts in various applications. This review focuses on recently developed transition metal phosphides (TMPs) electrocatalysts for the HER in alkaline media due to the cooperative effect between the phosphorus and transition metals. Finally, we discuss the challenges of TMPs for HER.

Phase Engineering and Synchrotron-Based Study on Two-Dimensional Energy Nanomaterials

In recent years, there has been significant interest in the development of two-dimensional (2D) nanomaterials with unique physicochemical properties for various energy applications. These properties are often derived from the phase structures established through a range of physical and chemical design strategies. A concrete analysis of the phase structures and real reaction mechanisms of 2D energy nanomaterials requires advanced characterization methods that offer valuable information as much as possible. Here, we present a comprehensive review on the phase engineering of typical 2D nanomaterials with the focus of synchrotron radiation characterizations. In particular, the intrinsic defects, atomic doping, intercalation, and heterogeneous interfaces on 2D nanomaterials are introduced, together with their applications in energy-related fields. Among them, synchrotron-based multiple spectroscopic techniques are emphasized to reveal their intrinsic phases and structures. More importantly, various in situ methods are employed to provide deep insights into their structural evolutions under working conditions or reaction processes of 2D energy nanomaterials. Finally, conclusions and research perspectives on the future outlook for the further development of 2D energy nanomaterials and synchrotron radiation light sources and integrated techniques are discussed.

Pt single atoms meet metal-organic frameworks to enhance electrocatalytic hydrogen evolution activity

The electrochemical hydrogen evolution reaction (HER) effectively produces clean, renewable, and sustainable hydrogen; however, the development of efficient electrocatalysts is required to reduce the high energy barrier of the HER. Herein, we report two excellent single-atom (SA)/metal-organic framework (MOF) composite electrocatalysts (PtSA-MIL100(Fe) and PtSA-MIL101(Cr)) for HER. The obtained PtSA-MIL100(Fe) and PtSA-MIL101(Cr) electrocatalysts exhibit overpotentials of 60 and 61 mV at 10 mA cm-2, respectively, which are close to that of commercial Pt/C (38 mV); they exhibit overpotentials of 310 and 288 mV at 200 mA cm-2, respectively, which are comparable to that of commercial Pt/C (270 mV). Theoretical simulations reveal that Pt SAs modulate the electronic structures of the MOFs, leading to the optimization of the binding strength for H* and significant enhancement of the HER activity. This study describes a novel strategy for preparing desirable HER electrocatalysts based on the synergy between SAs and MIL-series MOFs. Using MIL-series MOFs to support SAs could be valuable for future catalyst design.

MXene Derivatives for Energy Storage and Conversions

Associated with the rapid development of 2D transition metal carbides, nitrides, and carbonitrides (MXenes), MXene derivatives have been recently exploited and exhibited unique physical/chemical properties, holding promising applications in the areas of energy storage and conversions. This review provides a comprehensive summarization of the latest research and progress on MXene derivatives, including termination-tailored MXenes, single-atom implanted MXenes, intercalated MXenes, van der Waals atomic layers, and non-van der Waals heterostructures. The intrinsic relationship between structure, properties, and corresponding applications for MXene derivatives are then emphasized. Finally, the essential challenges are addressed and perspectives for the MXene derivatives are also discussed.

Simple Approach for Reconciling Cyclic Voltammetry with Hydrogen Adsorption Energy for Hydrogen Evolution Exchange Current

Cyclic voltammetry (CV) is a standard technique to analyze the current-potential characteristics of the hydrogen evolution reaction (HER). Herein, we develop a computational quantum-scaled CV model for the HER building on the Butler-Volmer relation for a one-step, one-charge transfer process. Owing to a universal and absolute rate constant verified by fitting to experimental cyclic voltammograms of elemental metals, we show that the model quantifies the exchange current─the main analytical descriptor for HER activity─solely using the hydrogen adsorption free energy obtained from density functional theory calculations. Furthermore, the model resolves controversies over analytical studies for HER kinetics.

Single-Site Metal-Organic Framework and Copper Foil Tandem Catalyst for Highly Selective CO2 Electroreduction to C2 H4

Tandem catalysis is a promising way to break the limitation of linear scaling relationship for enhancing efficiency, and the desired tandem catalysts for electrochemical CO₂ reduction reaction (CO₂ RR) are urgent to be developed. Here, a tandem electrocatalyst created by combining Cu foil (CF) with a single-site Cu(II) metal-organic framework (MOF), named as Cu-MOF-CF, to realize improved electrochemical CO₂ RR performance, is reported. The Cu-MOF-CF shows suppression of CH₄ , great increase in C₂ H₄ selectivity (48.6%), and partial current density of C₂ H₄ at -1.11 V versus reversible hydrogen electrode. The outstanding performance of Cu-MOF-CF for CO₂ RR results from the improved microenvironment of the Cu active sites that inhibits CH₄ production, more CO intermediate produced by single-site Cu-MOF in situ for CF, and the enlarged active surface area by porous Cu-MOF. This work provides a strategy to combine MOFs with copper-based electrocatalysts to establish high-efficiency electrocatalytic CO₂ RR.

Electrocatalysis Mechanism and Structure-Activity Relationship of Atomically Dispersed Metal-Nitrogen-Carbon Catalysts for Electrocatalytic Reactions

Atomically dispersed metal-nitrogen-carbon catalysts (M-N-C) have been widely used in the field of energy conversion, which has already attracted a huge amount of attention. Due to their unsaturated d-band electronic structure of the center atoms, M-N-C catalysts can be applied in different electrocatalytic reactions by adjusting their own microscopic electronic structures to achieve the optimization of the structure-activity relationship. Consequently, it is of great significance for the revelation of electrocatalytic mechanism and structure-activity relationship of M-N-C catalysts. Thus, this review first introduces the relative research methods, including in situ/operando characterization techniques and theoretical calculation methods. Furthermore, clarifying the electrocatalytic mechanism and structure-activity relationship of M-N-C catalysts in different electrochemical energy conversion reactions is focused. Moreover, the future research directions are pointed out based on the discussion. This review will provide good guidance to systematically study the catalytic mechanism of single-atom catalysts and reasonably design the single-atom catalysts.

Ultrafast self-heating synthesis of robust heterogeneous nanocarbides for high current density hydrogen evolution reaction

Designing cost-effective and high-efficiency catalysts to electrolyze water is an effective way of producing hydrogen. Practical applications require highly active and stable hydrogen evolution reaction catalysts working at high current densities (≥1000 mA cm⁻²). However, it is challenging to simultaneously enhance the catalytic activity and interface stability of these catalysts. Herein, we report a rapid, energy-saving, and self-heating method to synthesize high-efficiency Mo₂C/MoC/carbon nanotube hydrogen evolution reaction catalysts by ultrafast heating and cooling. The experiments and density functional theory calculations reveal that numerous Mo₂C/MoC hetero-interfaces offer abundant active sites with a moderate hydrogen adsorption free energy ΔG_H* (0.02 eV), and strong chemical bonding between the Mo₂C/MoC catalysts and carbon nanotube heater/electrode significantly enhances the mechanical stability owing to instantaneous high temperature. As a result, the Mo₂C/MoC/carbon nanotube catalyst achieves low overpotentials of 233 and 255 mV at 1000 and 1500 mA cm⁻² in 1 M KOH, respectively, and the overpotential shows only a slight change after working at 1000 mA cm⁻² for 14 days, suggesting the excellent activity and stability of the high-current-density hydrogen evolution reaction catalyst. The promising activity, excellent stability, and high productivity of our catalyst can fulfil the demands of hydrogen production in various applications.

Industry-level water splitting requires highly active and stable hydrogen evolution reaction (HER) catalysts. Herein, an ultrafast self-heating synthesis delivers robust Mo₂C/MoC/CNT HER catalysts that can work at 1000 mA cm⁻² for 14 days.

Mixture Phases Engineering of PtFe Nanofoams for Efficient Hydrogen Evolution

Phase engineering is a promising but challenging approach to construct PtFe-based catalysts with efficient hydrogen evolution reaction (HER) performance. Herein, the authors successfully synthesize PtFe nanofoams with face center cubic (fcc) phase, with simple cubic crystalline (scc) phase and with the mixture phases of fcc and scc phases (PtFe-mix) by hydrogen-assisted calcination for the first time. By benchmarking the HER activity, PtFe-mix exhibits excellent activity in 1.0 m KOH, requiring an overpotential of 28 mV to achieve 10 mA cm^-2 , which is better than the commercial Pt/C (34 mV). PtFe-mix also possesses remarkable stability up to 24 h. Density functional theory calculations further verify that PtFe-mix shows a more suitable d-band center and lower energy barrier for the initial water dissociation, facilitating the HER process. This work provides a meaningful strategy to design PtFe-based catalysts with efficient activity for hydrogen evolution.

Local Photothermal Effect Enabling Ni3 Bi2 S2 Nanoarray Efficient Water Electrolysis at Large Current Density

In terms of the large-scale hydrogen production by water electrolysis, achieving the bifunctional electrocatalyst with high efficiency and stability at high current densities is of great significance but still remains a grand challenge. To address this issue, herein, one unique hybrid electrode is synthesized with the local photothermal effect (LPTE) by supporting the novel ternary nickel (Ni)bismuth (Bi)sulfur (S) nanosheet arrays onto nickel foam (Ni₃ Bi₂ S₂ @NF) via a one-pot hydrothermal reaction. The combined experimental and theoretical observations reveal that owing to the intrinsic LPTE action of Bi, robust phase stability of Ni₃ Bi₂ S₂ as well as the synergistic effect with hierarchical configuration, upon injecting the light, the as-prepared Ni₃ Bi₂ S₂ exhibits remarkably improved efficiency of 44% and 35% for the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER), respectively. Such enhanced values are also comparable to those performed in working media heated to 80 °C. In addition, the overall water splitting system by using Ni₃ Bi₂ S₂ @NF as bifunctional electrodes only delivers an ultralow voltage of 1.40 V at 10 mA cm^-2 under LPTE, and can be stable more than 36 h at 500-1000 mA cm^-2 . More broadly, even worked at 0-5 °C, alkaline simulated seawater and high salt seawater, the electrodes still show apparent LPTE effect for improving catalytic efficiency.

Highly Dispersed Platinum Chlorine Atoms Anchored on Gold Quantum Dots for a Highly Efficient Electrocatalyst

The development of efficient and durable electrocatalysts is the only way to achieve commercial fuel cells. A new, efficient method was utilized for epitaxial growth of gold quantum dots using atomically platinum chlorine species with porous graphdiyne as a support (PtCl₂Au(111)/GDY), for obtaining successful multicomponent quantum dots with a size of 2.37 nm. The electrocatalyst showed a high mass activity of 175.64 A mg_Pt^-1 for methanol oxidation reactions (MORs) and 165.35 A mg_Pt^-1 for ethanol oxidation reactions (EORs). The data for this experiment are 85.67 and 246.80 times higher than those of commercial Pt/C, respectively. The catalyst also showed highly robust stability for MORs with negligible specific activity decay after 110 h at 10 mA cm^-2. Both structure characterizations and theoretical calculations reveal that the excellent catalytic performance can be ascribed to the chlorine introduced to modify the d-band structure on the Pt surface and suppression of the CO poisoning pathway of the MOR. Our results indicate that an atomically dispersed metal species tailoring strategy opens up a new path for the efficient design of highly active and stable catalysts.

Defect-Assisted Anchoring of Pt Single Atoms on MoS2 Nanosheets Produces High-Performance Catalyst for Industrial Hydrogen Evolution Reaction

Pt-based catalysts are currently the most efficient electrocatalysts for the hydrogen evolution reaction (HER), but the scarcity and high cost of Pt limit industrial applications. Downsizing Pt nanoparticles (NPs) to single atoms (SAs) can expose more active sites and increase atomic utilization, thus decreasing the cost. Here, a solar-irradiation strategy is used to prepare hybrid SA-Pt/MoS₂ nanosheets (NSs) that demonstrate excellent HER activity (the overpotential at a current density of 10 mA cm^-2 (η₁₀ ) of 44 mV, and Tafel slope of 34.83 mV dec^-1 in acidic media; η₁₀ of 123 mV, and Tafel slope of 76.71 mV dec^-1 in alkaline media). Defects and deformations introduced by thermal pretreatment of the hydrothermal MoS₂ NSs promote anchoring and stability of Pt SAs. The fabrication of Pt SAs and NPs is easily controlled using different Pt-precursor concentrations. Moreover, SA-Pt/MoS₂ produced under natural sunlight exhibits high HER performance (η₁₀ of 55 mV, and Tafel slope of 43.54 mV dec^-1 ), which indicates its viability for mass production. Theoretical simulations show that Pt improves the absorption of H atoms and the charge-transfer kinetics of MoS₂ , which significantly enhance HER activity. A simple, inexpensive strategy for preparing SA-Pt/MoS₂ hybrid catalysts for industrial HER is provided.

Iodine-Doping-Induced Electronic Structure Tuning of Atomic Cobalt for Enhanced Hydrogen Evolution Electrocatalysis

The development of strategies for tuning the electronic structure of the metal sites in single-atom catalysts (SACs) is the key to optimizing their activity. Herein, we report that iodine doping within the carbon matrix of a cobalt-nitrogen-carbon (Co-N-C) catalyst can effectively modulate its electronic structure and catalytic activity toward the hydrogen evolution reaction (HER). The iodine-doped Co-N-C catalyst shows exceptional HER activity in acid with an overpotential of merely 52 mV at 10 mA cm^-2, a small Tafel slope of 56.1 mV dec^-1, making it among the best SACs based on both precious and nonprecious metals. Moreover, this catalyst possesses a high turnover frequency (TOF) value of 1.88 s^-1 (η = 100 mV), which is about 1 order of magnitude larger than that (0.2 s^-1) of the iodine-free counterpart. Experimental and theoretical studies demonstrate that the introduction of iodine dopants lowers the chemical oxidation state of the Co sites, resulting in the optimized hydrogen adsorption and facilitated HER kinetics. This work provides an alternative strategy to regulate the electronic structure of SACs for improved performance.

Atomically Dispersed Selenium Sites on Nitrogen-Doped Carbon for Efficient Electrocatalytic Oxygen Reduction

Owing to their unique electronic structure and maximum atom utilization efficiency, single-atom catalysts have received widespread attention and exhibited efficient activity. Herein, we report the preparation of non-metal Se single atoms embedded in nitrogen-doped carbon (NC) via a high-temperature reduction strategy for electrocatalytic oxygen reduction reaction (ORR). Selenium dioxide is reduced to selenium by NC at high temperature and partially anchored to form C-Se-C bond. Impressively, the obtained single-atom catalyst exhibits outstanding ORR activity and stability that even surpasses state-of-the-art noble metal catalysts and many previously reported nanocatalysts. Experimental and theoretical calculations reveal that the Se single atoms can serve as the ORR active sites and contribute to lowering the reaction barrier. Our discoveries demonstrate the promising prospects for utilizing metal-free single-atom-based materials for efficient electrocatalysis.

Single-Atom Engineering to Ignite 2D Transition Metal Dichalcogenide Based Catalysis: Fundamentals, Progress, and Beyond

Single-atom catalysis has been recognized as a pivotal milestone in the development history of heterogeneous catalysis by virtue of its superior catalytic performance, ultrahigh atomic utilization, and well-defined structure. Beyond single-atom protrusions, two more motifs of single-atom substitutions and single-atom vacancies along with synergistic single-atom motif assemblies have been progressively developed to enrich the single-atom family. On the other hand, besides traditional carbon material based substrates, a wide variety of 2D transitional metal dichalcogenides (TMDs) have been emerging as a promising platform for single-atom catalysis owing to their diverse elemental compositions, variable crystal structures, flexible electronic structures, and intrinsic activities toward many catalytic reactions. Such substantial expansion of both single-atom motifs and substrates provides an enriched toolbox to further optimize the geometric and electronic structures for pushing the performance limit. Concomitantly, higher requirements have been put forward for synthetic and characterization techniques with related technical bottlenecks being continuously conquered. Furthermore, this burgeoning single-atom catalyst (SAC) system has triggered serial scientific issues about their changeable single atom-2D substrate interaction, ambiguous synergistic effects of various atomic assemblies, as well as dynamic structure-performance correlations, all of which necessitate further clarification and comprehensive summary. In this context, this Review aims to summarize and critically discuss the single-atom engineering development in the whole field of 2D TMD based catalysis covering their evolution history, synthetic methodologies, characterization techniques, catalytic applications, and dynamic structure-performance correlations. In situ characterization techniques are highlighted regarding their critical roles in real-time detection of SAC reconstruction and reaction pathway evolution, thus shedding light on lifetime dynamic structure-performance correlations which lay a solid theoretical foundation for the whole catalytic field, especially for SACs.

An acid-base molecular assembly strategy toward N-doped Mo2C@C nanowires with mesoporous Mo2C cores and ultrathin carbon shells for efficient hydrogen evolution

Molybdenum carbides are promising electrocatalysts for the hydrogen evolution reaction (HER). Rational design of morphology, composition and interfacial structure in Mo₂C materials is essential to enhance their HER performance. Herein, an acid-base molecular assembly strategy is demonstrated for the synthesis of novel N-doped Mo₂C@C core-shell nanowires (NWs) composed of mesoporous Mo₂C cores with interconnected crystalline walls and ultrathin carbon shells. The strong interactions between the two precursors, adenine (Ade) and phosphomolybdic acid (PMA), lead to the formation of inter-molecular hybrid NWs during a hydrothermal process. The subsequent pyrolysis leads to confined growth of crystalline Mo₂C NWs with inter-crystal mesopores (5 ~ 10 nm), formation of ultrathin carbon shells (~1.5 nm in thickness), and effective N doping. Such a structure architecture can provide abundant active sites, fast and diverse mass and electron transport paths, as well as stable reaction interfaces. The typical N-doped Mo₂C@C NWs exhibit high HER performance with a low overpotential of 136 mV at 10 mA cm^-2, a small Tafel slop of 58 mV dec^-1, excellent durability and outstanding anti-poisoning performance against CO and H₂S gases. Furthermore, the influences of several important factors, including the pyrolysis temperature, hydrothermal temperature and precursor mass ratio, on the morphology, composition and structural configuration of the resulted materials are elucidated and correlated with their HER performance. This work may provide a general strategy for the synthesis of other nanoscale metal carbides for various catalytic applications.

Single-Atom (Iron-Based) Catalysts: Synthesis and Applications

Supported single-metal atom catalysts (SACs) are constituted of isolated active metal centers, which are heterogenized on inert supports such as graphene, porous carbon, and metal oxides. Their thermal stability, electronic properties, and catalytic activities can be controlled via interactions between the single-metal atom center and neighboring heteroatoms such as nitrogen, oxygen, and sulfur. Due to the atomic dispersion of the active catalytic centers, the amount of metal required for catalysis can be decreased, thus offering new possibilities to control the selectivity of a given transformation as well as to improve catalyst turnover frequencies and turnover numbers. This review aims to comprehensively summarize the synthesis of Fe-SACs with a focus on anchoring single atoms (SA) on carbon/graphene supports. The characterization of these advanced materials using various spectroscopic techniques and their applications in diverse research areas are described. When applicable, mechanistic investigations conducted to understand the specific behavior of Fe-SACs-based catalysts are highlighted, including the use of theoretical models.

Toward Multicomponent Single-Atom Catalysis for Efficient Electrochemical Energy Conversion

Single-atom catalysts (SACs) have recently emerged as the ultimate solution for overcoming the limitations of traditional catalysts by bridging the gap between homogeneous and heterogeneous catalysts. Atomically dispersed identical active sites enable a maximal atom utilization efficiency, high activity, and selectivity toward the wide range of electrochemical reactions, superior structural robustness, and stability over nanoparticles due to strong atomic covalent bonding with supports. Mononuclear active sites of SACs can be further adjusted by engineering with multicomponent elements, such as introducing dual-metal active sites or additional neighbor atoms, and SACs can be regarded as multicomponent SACs if the surroundings of the active sites or the active sites themselves consist of multiple atomic elements. Multicomponent engineering offers an increased combinational diversity in SACs and unprecedented routes to exceed the theoretical catalytic performance limitations imposed by single-component scaling relationships for adsorption and transition state energies of reactions. The precisely designed structures of multicomponent SACs are expected to be responsible for the synergistic optimization of the overall electrocatalytic performance by beneficially modulating the electronic structure, the nature of orbital filling, the binding energy of reaction intermediates, the reaction pathways, and the local structural transformations. This Review demonstrates these synergistic effects of multicomponent SACs by highlighting representative breakthroughs on electrochemical conversion reactions, which might mitigate the global energy crisis of high dependency on fossil fuels. General synthesis methods and characterization techniques for SACs are also introduced. Then, the perspective on challenges and future directions in the research of SACs is briefly summarized. We believe that careful tailoring of multicomponent active sites is one of the most promising approaches to unleash the full potential of SACs and reach the superior catalytic activity, selectivity, and stability at the same time, which makes SACs promising candidates for electrocatalysts in various energy conversion reactions.

Facile Synthesis of MoP-RuP2 with Abundant Interfaces to Boost Hydrogen Evolution Reactions in Alkaline Media

Exploiting efficient electrocatalysts for hydrogen evolution reactions (HERs) is important for boosting the large-scale applications of hydrogen energy. Herein, MoP-RuP₂ encapsulated in N,P-codoped carbon (MoP-RuP₂@NPC) with abundant interfaces were prepared via a facile avenue with the low-toxic melamine phosphate as the phosphorous resource. Moreover, the obtained electrocatalyst possessed a porous nanostructure, had abundant exposed active sites and improved the mass transport during the electrocatalytic process. Due to the above merits, the prepared MoP-RuP₂@NPC delivered a greater electrocatalytic performance for HERs (50 mV@10 mA cm⁻²) relative to RuP₂@NPC (120 mV) and MoP@NPC (195 mV) in 1 M KOH. Moreover, an ultralow potential of 1.6 V was required to deliver a current density of 10 mA cm⁻² in the two-electrode configuration for overall water splitting. For practical applications, intermittent solar energy, wind energy and thermal energy were utilized to drive the electrolyzer to generate hydrogen gas. This work provides a novel and facile strategy for designing highly efficient and stable nanomaterials toward hydrogen production.

Single-Atom Electrocatalysts for Multi-Electron Reduction of CO2

The multi-electron reduction of CO₂ to hydrocarbons or alcohols is highly attractive in a sustainable energy economy, and the rational design of electrocatalysts is vital to achieve these reactions efficiently. Single-atom electrocatalysts are promising candidates due to their well-defined coordination configurations and unique electronic structures, which are critical for delivering high activity and selectivity and may accelerate the explorations of the activity origin at atomic level as well. Although much effort has been devoted to multi-electron reduction of CO₂ on single-atom electrocatalysts, there are still no reviews focusing on this emerging field and constructive perspectives are also urgent to be addressed. Herein recent advances in how to design efficient single-atom electrocatalysts for multi-electron reduction of CO₂ , with emphasis on strategies in regulating the interactions between active sites and key reaction intermediates, are summarized. Such interactions are crucial in designing active sites for optimizing the multi-electron reduction steps and maximizing the catalytic performance. Different design strategies including regulation of metal centers, single-atom alloys, non-metal single-atom catalysts, and tandem catalysts, are discussed accordingly. Finally, current challenges and future opportunities for deep electroreduction of CO₂ are proposed.

Activating Basal Surface of Palladium by Electronic Modulation via Atomically Dispersed Nitrogen Doping for High-Efficiency Hydrogen Evolution Reaction

Surface doping by atomically dispersed heteroatoms has become one of the most promising strategies for facilitating the catalytic activity of non-noble transition metals to replace platinum-based catalysts in the hydrogen evolution reaction (HER). However, the underlying mechanism for the atomically dispersed heteroatoms to modulate the electronic structure and the HER activity of a metal surface is still ambiguous. Moreover, the active catalytic region is limited by the small fraction of doped atoms, and the remaining basal surface is inactivated. Here, we demonstrate that the nitrogen doping is atomically dispersed on the palladium surface, which can achieve the near-thermoneutral hydrogen adsorption and promote the HER activity of the basal surface. The theoretical modeling reveals that the dispersed nitrogen atoms attract electrons from palladium and downdrift the d-band center for accelerating the hydrogen desorption. Our work offers understandings of atomically dispersed nitrogen doping on the surface of transition metals and paves the way for a further optimization of nonprecious-metal HER electrocatalysts.

Engineering the Coordination Sphere of Isolated Active Sites to Explore the Intrinsic Activity in Single-Atom Catalysts

Reducing the dimensions of metallic nanoparticles to isolated, single atom has attracted considerable attention in heterogeneous catalysis, because it significantly improves atomic utilization and often leads to distinct catalytic performance. Through extensive research, it has been recognized that the local coordination environment of single atoms has an important influence on their electronic structures and catalytic behaviors. In this review, we summarize a series of representative systems of single-atom catalysts, discussing their preparation, characterization, and structure-property relationship, with an emphasis on the correlation between the coordination spheres of isolated reactive centers and their intrinsic catalytic activities. We also share our perspectives on the current challenges and future research promises in the development of single-atom catalysis. With this article, we aim to highlight the possibility of finely tuning the catalytic performances by engineering the coordination spheres of single-atom sites and provide new insights into the further development for this emerging research field.

Which is Better for Nanomedicines: Nanocatalysts or Single-Atom Catalysts?

With the rapid advancements in nanotechnology and materials science, numerous nanomaterials have been used as catalysts for nanomedical applications. Their design and modification according to the microenvironment of diseases have been shown to achieve effective treatment. Chemists are in pursuit of nanocatalysts that are more efficient, controllable, and less toxic by developing innovative synthetic technologies and improving existing ones. Recently, single-atom catalysts (SACs) with excellent catalytic activity and high selectivity have attracted increasing attention because of their accurate design as nanomaterials at the atomic level, thereby highlighting their potential for nanomedical applications. In this review, the recent advances in nanocatalysts and SACs are briefly summarized according to their synthesis, characterizations, catalytic mechanisms, and nanomedical applications. The opportunities and future scope for their development and the issues and challenges for their application as nanomedicine are also discussed. As far as it is known, the review is the systematic comparison of nanocatalysts and SACs, especially in the field of nanomedicine, which has promoted the development of nanocatalytic medicine.

Single-Atom Catalysts Derived from Metal-Organic Frameworks for Electrochemical Applications

Single-atom catalysts (SACs) have received tremendous attention due to their extraordinary catalytic performances. The synthesis of this kind of catalysts is highly desired and challenging. In the last few years, metal-organic frameworks (MOFs) have been demonstrated as a promising precursor for fabricating SACs. In this review, the progress and recent advances in the synthesis of MOF-derived SACs and their electrochemical applications are summarized. First, the synthetic approaches based on MOFs and accessible characterization techniques for SACs as well as their advantages/disadvantages are discussed. Then, the electrochemical applications of these MOF-derived SACs including the oxygen reduction reaction (ORR), oxygen evolution reaction (OER), hydrogen evolution reaction (HER), CO₂ reduction reaction (CO₂ RR), nitrogen reduction reaction (NRR), and other energy-related reactions are reviewed. Finally, insights into the current challenges and future prospects of this field are briefly presented.