Three-Phase Photocatalysis for the Enhanced Selectivity and Activity of CO2 Reduction on a Hydrophobic Surface

Cu-doped CdZnS nanocrystals: a leap forward in selective photocatalytic CO2 reduction to methane

Our research has demonstrated a significant correlation between the Cu doping concentration in CdZnS and its photocatalytic performance, with CZS-2 exhibiting a 15-fold increase in methane (CH4) production rate compared to pristine CZS, reaching a peak value of 519.2 μL g-1 h-1. Moreover, CZS-2 demonstrates an unprecedented CH4 selectivity of 85.3%, surpassing previously reported values for analogous systems. In-depth electrochemical analysis reveals that Cu doping strategically modifies the electronic structure of CZS-x, facilitating efficient charge separation and transfer. This optimization minimizes charge recombination, leading to the selective promotion of CO2 reduction to CH4.

Enhanced catalytic performance through a single-atom preparation approach: a review on ruthenium-based catalysts

The outstanding catalytic properties of single-atom catalysts (SACs) stem from the maximum atom utilization and unique quantum size effects, leading to ever-increasing research interest in SACs in recent years. Ru-based SACs, which have shown excellent catalytic activity and selectivity, have been brought to the frontier of the research field due to their lower cost compared with other noble catalysts. The synthetic approaches for preparing Ru SACs are rather diverse in the open literature, covering a wide range of applications. In this review paper, we attempt to disclose the synthetic approaches for Ru-based SACs developed in the most recent years, such as defect engineering, coordination design, ion exchange, the dipping method, and electrochemical deposition etc., and discuss their representative applications in both electrochemical and organic reaction fields, with typical application examples given of: Li-CO2 batteries, N2 reduction, water splitting and oxidation of benzyl alcohols. The mechanisms behind their enhanced catalytic performance are discussed and their structure-property relationships are revealed in this review. Finally, future prospects and remaining unsolved issues with Ru SACs are also discussed so that a roadmap for the further development of Ru SACs is established.

g-C3N4-Based Photocatalytic Materials for Converting CO2 Into Energy: A Review

Environmental pollution management and renewable energy development are humanity's biggest issues in the 21st century. The rise in atmospheric CO2, which has surpassed 400 parts per million, has stimulated research on CO2 reduction and conversion methods. Presently, photocatalytic conversion of CO2 to valuable hydrocarbons enables the transformation of solar energy into chemical energy and offers a novel avenue for energy conversion while regulating the greenhouse effect. This is an ideal strategy for simultaneously addressing environmental issues and the energy crisis. Photocatalysts are essential to photocatalytic processes. Photocatalyst is the core of photocatalytic technology, and graphite carbon nitride (g-C3N4) has attracted much attention because of its nonmetallic characteristics, and it has the characteristics of low cost, tunable electronic structure, easy manufacture and strong reducibility. However, its activity is not only affected by external reaction conditions, but also by the band gap structure, physical and chemical stability, surface morphology and specific surface area of the photocatalyst it. In this paper, the application progress of g-C3N4-based photocatalytic materials in CO2 reduction is reviewed, and the modification strategies of g-C3N4-based catalysts to obtain better catalytic efficiency and selectivity in CO2 photocatalytic reduction are summarized, and the future development of this material is prospected.

Hydrophobic TaOx Species Overlayer Tuning Light-Driven Methane Chlorination with Inorganic Chlorine

Halogenated methane serves as a universal platform molecule for building high-value chemicals. Utilizing sodium chloride solution for photocatalytic methane chlorination presents an environmentally friendly method for methane conversion. However, competing reactions in gas-solid-liquid systems leads to low efficiency and selectivity in photocatalytic methane chlorination. Here, an in situ method is employed to fabricate a hydrophobic layer of TaOx species on the surface of NaTaO3. Through in-situ XPS and XANES spectra analysis, it is determined that TaOx is a coordination unsaturated species. The TaOx species transforms the surface properties from the inherent hydrophilicity of NaTaO3 to the hydrophobicity of TaOx/NaTaO3, which enhances the accessibility of CH4 for adsorption and activation, and thus promotes the methane chlorination reaction within the gas-liquid-solid three-phase system. The optimized TaOx/NaTaO3 photocatalyst has a good durability for multiple cycles of methane chlorination reactions, yielding CH3Cl at a rate of 233 µmol g-1 h-1 with a selectivity of 83%. In contrast, pure NaTaO3 exhibits almost no activity toward CH3Cl formation, instead catalyzing the over-oxidation of CH4 into CO2. Notably, the activity of the optimized TaOx/NaTaO3 photocatalyst surpasses that of reported noble metal photocatalysts. This research offers an effective strategy for enhancing the selectivity of photocatalytic methane chlorination using inorganic chlorine ions.

Asymmetric Atomic Dual-Sites for Photocatalytic CO2 Reduction

Atomically dispersed active sites in a photocatalyst offer unique advantages such as locally tuned electronic structures, quantum size effects, and maximum utilization of atomic species. Among these, asymmetric atomic dual-sites are of particular interest because their asymmetric charge distribution generates a local built-in electric potential to enhance charge separation and transfer. Moreover, the dual sites provide flexibility for tuning complex multielectron and multireaction pathways, such as CO2 reduction reactions. The coordination of dual sites opens new possibilities for engineering the structure-activity-selectivity relationship. This comprehensive overview discusses efficient and sustainable photocatalysis processes in photocatalytic CO2 reduction, focusing on strategic active-site design and future challenges. It serves as a timely reference for the design and development of photocatalytic conversion processes, specifically exploring the utilization of asymmetric atomic dual-sites for complex photocatalytic conversion pathways, here exemplified by the conversion of CO2 into valuable chemicals.

Nanoconfined tandem three-phase photocatalysis for highly selective CO2 reduction to ethanol

The conversion of CO2 and H2O into ethanol with high selectivity via photocatalysis is greatly desired for effective CO2 resource utilization. However, the sluggish and challenging C-C coupling hinders this goal, with the behavior of *CO holding the key. Here, a nanoconfined and tandem three-phase reaction system is established to simultaneously enhance the *CO concentration and interaction time, achieving an outstanding ethanol selectively of 94.15%. This system utilizes a tandem catalyst comprising an Ag core and a hydrophobic Cu2O shell. The hydrophobic Cu2O shell acts as a CO2 reservoir, effectively overcoming the CO2 mass-transfer limitation, while the Ag core facilitates the conversion of CO2 to CO. Subsequently, CO undergoes continuous reduction within the nanoconfined mesoporous channels of Cu2O. The synergy of enhanced mass transfer, nanoconfinement, and tandem reaction leads to elevated *CO concentrations and prolonged interaction time within the Cu2O shell, significantly reducing the energy barrier for *CO-*CO coupling compared to the formation of *CHO from *CO, as determined by density functional theory calculations. Consequently, C-C coupling preferentially occurs over *CHO formation, producing excellent ethanol selectivity. These findings provide valuable insights into the efficient production of C2+ compounds.

Vacancy-Engineered 1D Nanorods with Spatially Segregated Dual Redox Sites for Visible-Light-Driven Cooperative CO2 Reduction

Cooperative CO2 photoreduction with tailored organic synthesis offers a potent avenue for harnessing concurrently generated electrons and holes, facilitating the creation of both solar fuels and specialized chemical compounds. However, controlling the crystallization and morphologies of metal-free molecular nanostructures with exceptional photocatalytic activities toward CO2 reduction remains a significant challenge. These hurdles encompass insufficient CO2 activation potential, sluggish multielectron processes, delayed charge-separation kinetics, inadequate storage of long-lived photoexcitons, unfavorable thermodynamic conditions, and the precise control of product selectivity. Here, melem oligomer 2D nanosheets (MNSs) synthesized through pyrolysis are transformed into 1D nanorods (MNRs) at room temperature with the simultaneous engineering of vacancies and morphology. Transient absorption spectral analysis reveals that vacancies in MNRs trap charges, extending charge carrier lifetimes. Additionally, carbon vacancies enhance CO2 adsorption by increasing amine functional centers. The photocatalytic performance of MNRs for CO2 reduction coupled with benzyl alcohol oxidation is approximately ten times higher (CH3OH and aromatic aldehyde production rate 27 ± 0.5 and 93 ± 0.5 mmol g-1 h-1, respectively) than for the MNSs (CH3OH and aromatic aldehyde production rate 2.9 ± 0.5 and 9 ± 0.5 mmol g-1 h-1, respectively). The CO2 reduction pathway involved the carbon-coordinated formyl pathway through the formation of *COOH and *CHO intermediates, as mapped by in situ Fourier-transform infrared spectroscopy. The superior performance of MNRs is attributed to favorable energy-level alignment, enriched amine surfaces, and unique morphology, enhancing solar-to-chemical conversion.

Photoreforming of Microplastics: Challenges and Opportunities for Sustainable Environmental Remediation

Plastics are widely used in daily lives, but unfortunately, their inadequate recycling practices have led to the accumulation of microplastics in the environment, posing a threat to public health. The existing methods for treating microplastics are energy-intensive and environmentally damaging. In this context, photoreforming has emerged as a sustainable solution to address the microplastic crisis by simultaneously recycling them into value-added chemicals. This review presents a comprehensive overview of the application of photoreforming for upcycling microplastic. The underlying mechanisms of photoreforming reaction are discussed, followed by the exploration of recent advancements and innovative strategies in photoreforming techniques with particular emphasis on their real-world applications and potential for large-scale implementation. Also, critical factors influencing the efficiency of microplastic photoreforming are identified, providing guidance for further research and optimization.

Ionic Liquids Microenvironment Modulates the Interface Properties of g-C3N4 for Boosting the Performance of Photodegradation and Infected Wound-Healing Therapy

The improvement of photocatalytic activity of g-C3N4 is expected for its advanced applications but remains a challenge due to the limitations of current strategies, such as single function, inefficiency, and uneconomical. Herein, a modified g-C3N4 with improved interface properties is constructed through the modulation of the ionic microenvironment affected by ionic liquids (ILs) and exhibits a 2.3-fold enhanced photodegradation efficiency and a 3.5-fold enhanced reaction rate relative to pristine g-C3N4. It has demonstrated excellent performance in photo-therapy bacterial-infected wounds. Theoretical calculation indicated that the precursor can be regulated by designing the specific ILs microenvironment to form "ILs-Mel" clusters due to the diversity of interaction energy and electrostatic potential. The cluster results in uneven stress on the 2D plane, further inducing the reconstruction of the microstructure. The synergistic effect of cations and anions of ILs on regulating the interface properties of g-C3N4 due to the change of skeleton structure during thermolysis of ILs. The microstructure, surface, and optical-electrical properties can be adjusted by selecting different cations of ILs, and the custom-made band structure and wettability can be obtained by selecting different anions. This work provides a facile strategy to modulate the interface properties of g-C3N4 by building specific a microenvironment of precursor.

Electron repulsion tuned electronic structure of TiO2 by fluorination for efficient and selective photocatalytic ammonia generation

The photocatalytic conversion of nitrogen into high-value ammonia products holds tremendous potential in the global nitrogen cycle. However, the activation of N2 and competition of hydrogen evolution limit the improvement of nitrogen fixation performance. In this study, we developed a fluorinated TiO2 (F-TiO2) using a hydrothermal-annealing method. The incorporation of F dopants not only enhances the adsorption and activation of N2 through electronic structure regulation, but also facilitates an in situ increase in active sites via the electron repulsion effect between F and Ti atoms. In addition, the presence of F on the surface effectively improved the nitrogen supply problem and optimized the nitrogen fixation selectivity for its hydrophobic modulation. The NH3 yield of the F-TiO2 photocatalyst reached 63.8 μmol h-1 g-1, which was 8.5 times higher than that of pure TiO2. And the selectivity experiment showed that the electronic ratio of NH3 to H2 production reached 0.890. This research offers valuable insights for the design of highly efficient and selective nitrogen-fixing photocatalysts.

High-Performance Aluminum Fuels Induced by Monolayer Self-Assembly of Nano-Sized Energetic Fluoride Vesicles on the Surface

Surface modification is frequently used to solve the problems of low combustion properties and agglomeration for aluminum-based fuels. However, due to the intrinsic incompatibility between the aluminum powder and the organic modifiers, the surface coating is usually uneven and disordered, which significantly deteriorates the uniformity and performances of the Al-based fuels. Herein, a new approach of monolayer nano-vesicular self-assembly is proposed to prepare high-performance Al fuels. Triblock copolymer G-F-G is produced by glycidyl azide polymer (GAP) and 2,2'-(2,2,3,3,4,5,5-Octafluorohexane-1,6-diyl) bis (oxirane) (fluoride) ring-open addition reaction. By utilizing G-F-G vesicular self-assembly in a special solvent, the nano-sized vesicles are firmly adhered to the surface of Al powder through the long-range attraction between the fluorine segments and Al. Meanwhile, the electrostatic repulsion between vesicles ensures an extremely thin coating thickness (≈15 nm), maintaining the monolayer coating structure. Nice ignition, combustion, anti-agglomeration, and water-proof properties of Al@G-F-G(DMF) are achieved, which are superior among the existing Al-based fuels. The derived Al-based fuel has excellent comprehensive properties, which can not only inspire the development of new-generation energetic materials but also provide facile but exquisite strategies for exquisite surface nanostructure construction via ordered self-assembly for many other applications.

Metal Poly(heptazine imides) as Multifunctional Photocatalysts for Solar Fuel Production

Solar-driven photocatalysis employing particulate semiconductors represents a promising approach for sustainable production of valuable chemical feedstock. Metal poly(heptazine imide) (MPHI), a novel 2D ionic carbon nitride, has been recognized as an emerging photocatalyst with distinctive properties. In this minireview, we first delineate the forefront innovations of MPHI photocatalysts, spanning from synthetic strategies and solving structures to the exploration of novel properties. We place special emphasis on the structural design principles aimed at developing high-performance MPHI systems toward photocatalytic solar fuel production such as H2 evolution, H2O oxidation, H2O2 production and CO2 reduction. Finally, we discuss crucial insights and challenges in leveraging highly active MPHIs for efficient solar-to-chemical energy conversion.

Quasi-Homogeneous Photocatalysis in Ultrastiff Microporous Polymer Aerogels

The development of efficient and low-cost catalysts is essential for photocatalysis; however, the intrinsically low photocatalytic efficiency as well as the difficulty in using and recycling photocatalysts in powder morphology greatly limit their practical performance. Herein, we describe quasi-homogeneous photocatalysis to overcome these two limitations by constructing ultrastiff, hierarchically porous, and photoactive aerogels of conjugated microporous polymers (CMPs). The CMP aerogels exhibit low density but high stiffness beyond 105 m2 s-2, outperforming most low-density materials. Extraordinary stiffness ensures their use as robust scaffolds for scaled photocatalysis and recycling without damage at the macroscopic level. A challenging but desirable reaction for direct deaminative borylation is demonstrated using CMP aerogel-based quasi-homogeneous photocatalysis with gram-scale productivity and record-high efficiency under ambient conditions. Combined terahertz and transient absorption spectroscopic studies unveil the generation of high-mobility free carriers and long-lived excitonic species in the CMP aerogels, underlying the observed superior catalytic performance.

CO2 Photoreduction over Semiconducting 2D Materials with Supported Single Atoms: Recent Progress and Challenges

In the face of the growing energy crisis and environmental challenges, substantial efforts are now directed toward sustainable clean energy as a replacement for traditional fossil fuels. CO2 photoreduction into value-added chemicals and fuels is widely recognized as a promising approach to mitigate current energy and environmental concerns. Photocatalysts comprising single atoms (SAs) supported on two-dimensional (2D) semiconducting materials (SAs-2DSemi) have emerged as a novel frontier due to the combined merits of SA catalysts and 2D materials. In this study, we review advancements in metal SAs confined on 2DSemi substrates, categorized into four groups: (1) metal oxide-based, (2) g-C3N4-based, (3) emerging, and (4) hybridized 2DSemi, for photocatalytic CO2 conversion over the past few years. With a particular focus on highlighting the distinct advantages of SAs-2DSemi, we delve into the synthesis of state-of-the-art catalysts, their catalytic performances, and mechanistic elucidation facilitated by experimental characterizations and theoretical calculations. Following this, we outline the challenges in this field and offer perspectives on harnessing the potential of SAs-2DSemi as promising photocatalysts. This comprehensive review aims to provide valuable insights for the future development of 2D photocatalytic materials involving SAs for CO2 reduction.

Photothermal Mineralization of Polyolefin Microplastics via TiO2 Hierarchical Porous Layer-Based Semiwetting Air-Plastic-Solid Interfaces

Photo-mineralization of microplastics under mild conditions has emerged as a promising solution to plastic waste disposal. However, the inadequate contact between oxygen, water-insoluble polyolefin microplastics, and photocatalysts remains a critical issue. In this study, a TiO2 hierarchical porous layer (TiO2-HPL) photocatalyst is presented to establish air-plastic-solid triphase interfaces for the photothermal mineralization of polyolefins. The wettability of the TiO2-HPL-based triphase interface is finely controlled from plastophobic to plastophilic. High-resolution imaging and finite element simulation demonstrate the significance of a semiwetting state in achieving multidirectional oxygen diffusion through the hierarchical pore structure while maintaining sufficient contact between the plastic phase and photocatalysts. For low-density polyethylene, the TiO2-HPL achieves a photothermal mineralization rate of 5.63 mmol g-1 h-1 and a conversion of 26.3% after 20 h of continuous irradiation. Additionally, the triphase photocatalytic system with semiwetting gas-plastic-solid interfaces shows good universality for various polyolefin reagents and products, illustrating its potential in achieving efficient photothermal mineralization of non-degradable microplastics.

Photocatalytic Conversion of Methane to Ethanol at a Three-Phase Interface with Concentration-Matched Hydroxyl and Methyl Radicals

The direct oxidation of CH4 to C2H5OH is attractive but challenging owing to the intricate processes involving carbon-chain growth and hydroxylation simultaneously. The inherent difficulty arises from the strong tendency of CH4 to overoxidize in the commonly used pressurized powder suspension systems rich in reactive oxygen radicals (ROR), which are specifically designed for CH4 concentration and activation. Meanwhile, the strong tendency of nucleophilic attack of potent ROR on the C-C bond of the resulting product C2H5OH ultimately leads to a higher selectivity for C1 oxygenates. This study addresses this multifaceted issue by designing a three-phase interface based on a hydrophilic floating Fe(III)-cross-linked macroporous alginate hydrogel film encapsulated with C3N4 [Fe(III)@ACN] to simultaneously enhance the accessibility of H2O and CH4 molecules to the active sites and species within the macroporous channel. The hydrophilic properties of Fe(III)@ACN allow the in situ production of H2O2 from C3N4 through the water oxidation reaction under irradiation. The concurrent photoinduced Fe(II) triggers Fenton reaction with H2O2 to produce •OH. The enhanced mass transfer of CH4 at the three-phase interface ensures the efficient formation of •CH3 by reacting with •OH, ultimately facilitating carbon-chain growth in the conversion pathway from CH4 to CH3OH and finally to C2H5OH with •CH3 and •OH present in comparable concentrations. Thus, the Fe(III)@ACN catalyst exhibits a remarkable 96% selectivity for alcohol, achieving a 90% selectivity for C2H5OH in the alcohol products. The C2H5OH production rate reaches 171.7 μmol g-1 h-1 without the need for precious-metal additive.

Vacancy-Rich Bismuth-Based Nanosheets for Mitochondrial Destruction via CO Poisoning, Ca2+ Dyshomeostasis, and Oxidative Damage

Mitochondria are core regulators of tumor cell homeostasis, and their damage has become an arresting therapeutic modality against cancer. Despite the development of many mitochondrial-targeted pharmaceutical agents, the exploration of more powerful and multifunctional medications is still underway. Herein, oxygen vacancy-rich BiO2-x wrapped with CaCO3 (named BiO2-x@CaCO3/PEG, BCP) is developed for full-fledged attack on mitochondrial function. After endocytosis of BCP by tumor cells, the CaCO3 shell can be decomposed in the acidic lysosomal compartment, leading to immediate Ca2+ release and CO2 production in the cytoplasm. Near-infrared irradiation enhances the adsorption of CO2 onto BiO2-x defects, which enables highly efficient photocatalysis of CO2-to-CO. Meanwhile, such BiO2-x nanosheets possess catalase-, peroxidase- and oxidase-like catalytic activities under acidic pH conditions, allowing hypoxia relief and the accumulation of diverse reactive oxygen species (ROS) in the tumor microenvironment. Ca2+ overload-induced ion dyshomeostasis, CO-mediated respiratory chain poisoning, ROS-triggered oxidative stress aggravation, and cytosolic hyperoxia can cause severe mitochondrial disorders, which further lead to type I cell death in carcinoma. Not only does BCP cause irreversible apoptosis, but immunogenic cell death is simultaneously triggered to activate antitumor immunity for metastasis inhibition. Collectively, this platform promises high benefits in malignant tumor therapy and may expand the medical applications of bismuth-based nanoagents.

Hydrogen Bubbles: Harmonizing Local Hydrogen Transfer for Efficient Plastic Hydro-Depolymerization

Hydro-depolymerization presents a promising avenue for transforming plastic waste into high-value hydrocarbons, offering significant potential for value-added recycling. However, a major challenge in this method arises from kinetic limitations due to insufficient hydrogen concentration near the active sites, requiring optimal catalytic performance only at higher hydrogen pressures. In this study, we address this hurdle by developing "hydrogen bubble catalysts" featuring Ru nanoparticles within mesoporous SBA-15 channels (Ru/SBA). The distinctive feature of Ru/SBA catalysts lies in their capacity for physical hydrogen storage and chemically reversible hydrogen spillover, ensuring a timely and ample hydrogen supply. Under identical reaction conditions, the catalytic activity of Ru/SBA surpassed that of Ru/SiO2 (no hydrogen storage capacity) by over 4-fold. This substantial enhancement in catalytic performance provides significant opportunities for near atmospheric pressure hydro-depolymerization of plastic waste.

Light-Driven C-C Coupling for Targeted Synthesis of CH3 COOH with Nearly 100 % Selectivity from CO2

Targeted synthesis of acetic acid (CH3 COOH) from CO2 photoreduction under mild conditions mainly limits by the kinetic challenge of the C-C coupling. Herein, we utilized doping engineering to build charge-asymmetrical metal pair sites for boosted C-C coupling, enhancing the activity and selectivity of CO2 photoreduction towards CH3 COOH. As a prototype, the Pd doped Co3 O4 atomic layers are synthesized, where the established charge-asymmetrical cobalt pair sites are verified by X-ray photoelectron spectroscopy and X-ray absorption near edge spectroscopy spectra. Theoretical calculations not only reveal the charge-asymmetrical cobalt pair sites caused by Pd atom doping, but also manifest the promoted C-C coupling of double *COOH intermediates through shortening of the coupled C-C bond distance from 1.54 to 1.52 Å and lowering their formation energy barrier from 0.77 to 0.33 eV. Importantly, the decreased reaction energy barrier from the protonation of two*COOH into *CO intermediates for the Pd-Co3 O4 atomic layer slab is 0.49 eV, higher than that of the Co3 O4 atomic layer slab (0.41 eV). Therefore, the Pd-Co3 O4 atomic layers exhibit the CH3 COOH evolution rate of ca. 13.8 μmol g-1  h-1 with near 100% selectivity, both of which outperform all previously reported single photocatalysts for CO2 photoreduction towards CH3 COOH under similar conditions.

Accelerating Charge Separation and CO2 Photoreduction in Aqueous Phase under Visible Light with Ru Nanoparticles Loaded on Ga-Doped NiTiO3 in a Batch Photoreactor

Titanate perovskite (ATiO3) semiconductors show prospects of being active photocatalysts in the conversion of CO2 to chemical fuels such as methanol (CH3OH) in the aqueous phase. Some of the challenges in using ATiO3 are limited light-harvesting capability, rapid bulk charge recombination, and the low density of catalytic sites participating in CO2 reduction. To address these challenges, Ga-doped NiTiO3 (GNTO) photocatalysts in which Ga ions substitute for Ti ions in the crystal lattice to form electron trap states and oxygen vacancies have been synthesized in this work. The synthesized GNTO was then loaded with Ru nanoparticles to accelerate charge separation and enable excellent CO2 photoreduction activity under visible light. CO2 photoreduction was conducted in a batch photoreactor charged with a 0.1 M NaHCO3 aqueous solution at room temperature and a 3.5 bar pressure using a 1.0 wt % Ru-GNTO photocatalyst to yield methanol at a rate of 84.45 μmol g-1 h-1. A small amount of methane was produced as a side product at 21.35 μmol g-1 h-1, which is also a fuel molecule. We attribute this high catalytic activity toward CO2 photoreduction to a synergistic combination of our novel heterostructured 1.0 wt % Ru-GNTO photocatalyst and the implementation of a pressurized photoreactor. This work demonstrates an effective strategy for metal doping with active nanospecies functionality to improve the performance of ATiO3 photocatalysts in valorizing CO2 to solar fuels.

Sustainable all-weather CO2 utilization by mimicking natural photosynthesis in a single material

Solar-driven CO2 conversion into hydrocarbon fuels is a sustainable approach to synchronously alleviating the energy crisis and achieving net CO2 emissions. However, the dependence of the conversion process on solar illumination hinders its practical application due to the intermittent availability of sunlight at night and on cloudy or rainy days. Here, we report a model material of Pt-loaded hexagonal tungsten trioxide (Pt/h-WO3) for decoupling light and dark reaction processes, demonstrating the sustainable CO2 conversion under dark conditions for the first time. In such a material system, hydrogen atoms can be produced by photocatalytic water splitting under solar illumination, stored together with electrons in the h-WO3 through the transition of W6+ to W5+ and spontaneously released to trigger catalytic CO2 reduction under dark conditions. Furthermore, we demonstrate using natural light that CH4 production can persist at night and on rainy days, proving the accomplishment of all-weather CO2 conversion via a sustainable way.

Solar-driven CO2-to-ethanol conversion enabled by continuous CO2 transport via a superhydrophobic Cu2O nano fence

The overall photocatalytic CO2 reduction reaction presents an eco-friendly approach for generating high-value products, specifically ethanol. However, ethanol production still faces efficiency issues (typically formation rates <605 μmol g-1 h-1). One significant challenge arises from the difficulty of continuously transporting CO2 to the catalyst surface, leading to inadequate gas reactant concentration at reactive sites. Here, we develop a mesoporous superhydrophobic Cu2O hollow structure (O-CHS) for efficient gas transport. O-CHS is designed to float on an aqueous solution and act as a nano fence, effectively impeding water infiltration into its inner space and enabling CO2 accumulation within. As CO2 is consumed at reactive sites, O-CHS serves as a gas transport channel and diffuser, continuously and promptly conveying CO2 from the gas phase to the reactive sites. This ensures a stable high CO2 concentration at reactive sites. Consequently, O-CHS achieves the highest recorded ethanol formation rate (996.18 μmol g-1 h-1) to the best of our knowledge. This strategy combines surface engineering with geometric modulation, providing a promising pathway for multi-carbon production.

Enhanced CO2 reduction with hydrophobic cationic-ionomer layer-modified zero-gap MEA in acidic electrolyte

A hydrophobic cationic-ionomer layer of quaternary ammonium poly(N-methyl-piperidine-co-p-terphenyl) and PTFE is presented to enhance the CO2 electroreduction in a zero-gap membrane electrode assembly (MEA) electrolyzer under acidic and low alkali ion concentration conditions. The modified MEA achieved a maximum CO faradaic efficiency of 95.6% at 100 mA cm-2.

Efficient Solar-Driven CO2 Methanation and Hydrogen Storage Over Nickel Catalyst Derived from Metal-Organic Frameworks with Rich Oxygen Vacancies

Solar-driven photothermal conversion of carbon dioxide (CO2 ) to methane (CH4 ) is a promising approach to remedy energy shortage and climate changes, where highly efficient photothermal catalysts for CO2 methanation urgently need to be designed. Herein, nickel-based catalysts (Ni/ZrO2 ) derived from metal-organic frameworks (MOFs) are fabricated and studied for photothermal CO2 methanation. The optimized catalyst 50Ni/ZrO2 achieves a stable CH4 production rate of 583.3 mmol g-1  h-1 in a continuous stability test, which is almost tenfold higher than that of 50Ni/C-ZrO2 synthesized via commercial ZrO2 . Physicochemical properties indicate that 50Ni/ZrO2 generates more tetragonal ZrO2 and possesses more oxygen vacancies (OVs) as well as enhanced nickel-ZrO2 interaction. As a result, 50Ni/ZrO2 exhibits the strong abilities of light absorption and light-to-heat conversion, superior adsorption capacities of reactants (H2 , CO2 ), and an intermediate product (CO), which finally boosts CH4 formation. This work provides an efficient strategy to design a photothermocatalyst of CO2 methanation through utilizing MOFs-derived support.

Fabrication of water-floating litchi-like polystyrene-sphere-supported TiO2/Bi2O3 S-scheme heterojunction for efficient photocatalytic degradation of tetracycline

The exploration of advanced photocatalysts for antibiotic degradation is critical, but it remains a challenge due to the lack of rational structural design and in-depth insights into molecular oxygen activation. Water-floating photocatalysts could be one of the best choices owing to their technical features in terms of reasonability and efficiency involving a high oxygenation of photocatalyst surface, fully solar irradiation, and simple recycling and reuse. Herein, a floatable litchi-like architecture of a polystyrene-sphere-supported TiO2/Bi2O3 (PS@TiO2/Bi2O3) S-scheme heterojunction was skillfully constructed and evaluated for photodegradation of model tetracycline (TC) antibiotics. By integrating the advantages of floatability and S-scheme, the TC removal rate of the optimal PS@TiO2/Bi2O3-0.4 catalyst can reach 88.4% under 1 h illumination, which is higher than that of pristine Bi2O3 (60.8%) and PS@TiO2 (40.1%). Moreover, PS@TiO2/Bi2O3-0.4 exhibits high recyclability and stability, and there is no significant loss of activity after five cycles of repeated use. With the aid of liquid chromatography-mass spectrometry analysis and density functional theory calculations, a reasonable degradation pathway for TC was proposed. The present work provides a recyclable and efficient approach for the photodegradation of TC, expecting to guide the innovative exploitation of other environmental systems.

Oxygen-Doped Red Carbon Nitride: Enhanced Charge Separation and Light Absorption for Robust CO2 Photoreduction

Utilizing artificial photosynthesis for the conversion of CO2 into value-added fuels has been recognized as a promising strategy for the ever-increasing energy crisis and the greenhouse effect. Herein, the element doping engineering of red spherical g-C3N4 having oxygen bonded with compositional carbon (C-O-C) for CO2 photoreduction has been explored to address this challenge. The C-O bond was formed by hydrothermal treatment with dicyandiamide and 1,3,5-trichlorotriazine. The experimental and DFT results displayed the optimum oxygen substitution sites and demonstrated that the oxygen doping greatly improved the light utilization efficiency, CO2 affinity, and charge carrier transfer, which enhanced photoreduction efficiency of CO2. The evolution rates of CO (47.2 μmol g-1) and CH4 (9.1 μmol g-1) using O-CN were much higher than that of bulk-CN without a cocatalyst. The main reason was the contribution of the O 2p orbital to the conduction band (CB) and valence band of O-CN, which effectively reduced the electron mass, facilitating electron/hole separation and enhancing its fluidity. Furthermore, the Fermi level also shifted to the bottom of the CB, leading to higher electron density, which further improved the CO2 reduction ability. Our study marks an important step for developing high-performance photocatalysts for reduction of CO2.

Floating Carbon Nitride Composites for Practical Solar Reforming of Pre-Treated Wastes to Hydrogen Gas

Solar reforming (SR) is a promising green-energy technology that can use sunlight to mitigate biomass and plastic waste while producing hydrogen gas at ambient pressure and temperature. However, practical challenges, including photocatalyst lifetime, recyclability, and low production rates in turbid waste suspensions, limit SR's industrial potential. By immobilizing SR catalyst materials (carbon nitride/platinum; CN_x |Pt and carbon nitride/nickel phosphide; CN_x |Ni₂ P) on hollow glass microspheres (HGM), which act as floating supports enabling practical composite recycling, such limitations can be overcome. Substrates derived from plastic and biomass, including poly(ethylene terephthalate) (PET) and cellulose, are reformed by floating SR composites, which are reused for up to ten consecutive cycles under realistic, vertical simulated solar irradiation (AM1.5G), reaching activities of 1333 ± 240 µmol_H2 m^-2 h^-1 on pre-treated PET. Floating SR composites are also advantageous in realistic waste where turbidity prevents light absorption by non-floating catalyst powders, achieving 338.1 ± 1.1 µmol_H2 m^-2 h^-1 using floating CN_x versus non-detectable H₂ production with non-floating CN_x and a pre-treated PET bottle as substrate. Low Pt loadings (0.033 ± 0.0013% m/m) demonstrate consistent performance and recyclability, allowing efficient use of precious metals for SR hydrogen production from waste substrates at large areal scale (217 cm² ), taking an important step toward practical SR implementation.

Hydrophobic surface efficiently boosting Cu2O nanowires photoelectrochemical CO2 reduction activity

The limited mass transfer of CO₂ and the competitive hydrogen evolution reaction (HER) during photoelectrochemical (PEC) CO₂ reduction usually result in low CO₂ reduction activity. Here, we constructed a Cu₂O/Sn/PTFE photocathode with a hydrophobic surface based on Cu₂O by physical vapor deposition and a dipping method. The CO faradaic efficiency (FE) increased from 34.5% (Cu₂O) to 95.1% (Cu₂O/Sn/PTFE) at -0.7 V vs. RHE, and the FE_H2 decreased from 27.9% (Cu₂O) to 3.8% (Cu₂O/Sn/PTFE). The introduction of the hydrophobic layer enhances the local CO₂ concentration on the electrode surface and effectively isolates H⁺ from the aqueous electrolyte, thereby enhancing the CO₂ reduction activity.

Immobilizing Metal Nanoparticles on Hierarchically Porous Organic Cages with Size Control for Enhanced Catalysis

Incorporating metal nanoparticles (MNPs) into porous composites with controlled size and spatial distributions is beneficial for a broad range of applications, but it remains a synthetic challenge. Here, we present a method to immobilize a series of highly dispersed MNPs (Pd, Ir, Pt, Rh, and Ru) with controlled size (<2 nm) on hierarchically micro- and mesoporous organic cage supports. Specifically, the metal-ionic surfactant complexes serve as both metal precursors and mesopore-forming agents during self-assembly with a microporous imine cage CC3, resulting in a uniform distribution of metal precursors across the resultant supports. The functional heads on the ionic surfactants as binding sites, together with the nanoconfinement of pores, guide the nucleation and growth of MNPs and prevent their agglomeration after chemical reduction. Moreover, the as-synthesized Pd NPs exhibit remarkable activity and selectivity in the tandem reaction due to the advantages of ultrasmall particle size and improved mass diffusion facilitated by the hierarchical pores.

Efficient electrochemical NO reduction to NH3 over metal-free g-C3N4 nanosheets and the role of interface microenvironment

The ever-increasing NO emission has caused severe environmental issues and adverse effects on human health. Electrocatalytic reduction is regarded as a win-win technology for NO treatment with value-added NH₃ generation, but the process is mainly relied on the metal-containing electrocatalysts. Here, we developed metal-free g-C₃N₄ nanosheets (deposited on carbon paper, named as CNNS/CP) for NH₃ synthesis from electrochemical NO reduction under ambient condition. The CNNS/CP electrode afforded excellent NH₃ yield rate of 15.1 μmol h^-1 cm^-2 (2180.1 mg g_cat^-1 h^-1) and Faradic efficiency (FE) of ∼41.5 % at - 0.8 and - 0.6 V_RHE, respectively, which were superior to the block g-C₃N₄ particles and comparable to the most of metal-containing catalysts. Moreover, through adjusting the interface microenvironment of CNNS/CP electrode by hydrophobic treatment, the abundant gas-liquid-solid triphasic interface improved NO mass transfer and availability, which enhanced NH₃ production and FE to about 30.7 μmol h^-1 cm^-2 (4424.2 mg g_cat^-1 h^-1) and 45.6 % at potential of - 0.8 V_RHE. This study opens a novel pathway to develop efficient metal-free electrocatalysts for NO electroreduction and highlights the importance of electrode interface microenvironment in electrocatalysis.

Deciphering the Superior Electronic Transmission Induced by the Li-N Ligand Pairs Boosted Photocatalytic Hydrogen Evolution

Atomic level decoration route is designated as one of the attractive methods to regulate both the charge density and band structure of photocatalysts. Moreover, to enable more efficient separation and transport of photocarriers, the construction of novel active sites can enhance both the reactivity and electrical conductivity of the crystal. Herein, an Li-N ligand is constructed via co-doping lithium and nitrogen atoms into ZnIn₂ S₄ lattice, which achieves a promoted photocatalytic H₂ evolution at 9737 µmol g^-1 h^-1 . The existence of Li-N ligand pairs and the behaviors of photocarriers on L₄₀ N₅ ZIS are determined systematically, which also provides a unique insight into the mechanism of the improved photocarrier migration rate. With the introduction of Li-N dual sites, the vacancy form of ZnIn₂ S₄ has changed and the photocatalytic stability is significantly improved. Interestingly, the change of charge density around Li-N ligand in ZnIn₂ S₄ is determined by theoretical simulations, as well as the regulated energy barrier of photocatalytic water splitting caused by Li-N dual sites, which act as both adsorption site for H₂ O and stronger reactive sites. This work helps to extend the understanding of ZnIn₂ S₄ and offers a fresh perspective for the creation of a Li-N co-doped photocatalyst.

Manipulating wettability of catalytic surface for improving ammonia production from electrochemical nitrogen reduction

An electrochemical nitrogen reduction reaction (ENRR) is considered a promising alternative for the traditional Haber-Bosch process. In this study, we present a method for improving the ENRR by controlling the wettability of the catalyst surface, suppressing the hydrogen evolution reaction (HER) while facilitating N₂ adsorption. Reduced-graphene oxide (rGO) with a hydrophobic surface property and a contact angle (C.A.) of 59° was synthesized through a high-density atmospheric plasma deposition. Two other hydrophilic and superhydrophobic surfaces with a C.A. of 15° and 150° were developed through additional argon plasma and heat treatment of as-deposited rGO, respectively. The ENRR results showed that the ammonia yield and Faradaic efficiency tended to increase with increasing hydrophobicity. Electrochemical measurements reveal that superhydrophobic rGO achieves a higher Faradaic efficiency (5.73 %) at -0.1 V (vs RHE) and a higher NH₃ yield (9.77 μg h^-1 cm^-2) at -0.4 V (vs RHE) in a 0.1 M KOH electrolyte. In addition, the computational fluid dynamics simulation confirmed that the amount of time the N₂ gas remains on the surface could increase by improving the hydrophobicity of the catalytic surface. This study inspires the development of the rGO electrocatalyst through surface wettability modification for boosting ammonia electrosynthesis.

Continuously Flow Photothermal Catalysis Efficiently CO2 Reduction Over S-Scheme 2D/0D Bi5 O7 I-OVs/Cd0.5 Zn0.5 S Heterojunction with Strong Interfacial Electric Field

Using CO₂ , water, and sunlight to produce solar fuel is a very attractive process, which can synchronously reduce carbon and convert solar energy into hydrocarbons. However, photocatalytic CO₂ reduction is often limited by the low selectivity of reduction products and poor photocatalytic activity. In this study, S-scheme Bi₅ O₇ I-OVs/Cd_0.5 Zn_0.5 S (Bi₅ O₇ I-OVs/CZS-0.5) heterojunction with strong interfacial electric field (IEF) is prepared by in situ growth method. The performance of reduction CO₂ to CO is studied by continuous flow photothermal catalytic (PTC) CO₂ reduction platform. 12.5% Bi₅ O₇ I-OVs/CZS-0.5 shows excellent CO yield of 58.6 µmol g^-1  h^-1 and selectivity of 98.4%, which are 35.1 times than that of CZS-0.5 under visible light. The charge transfer path of the S-scheme through theoretical calculation (DFT), in situ irradiation Kelvin probe force microscope (ISI-KPFM) and in situ irradiation X-ray photoelectron spectroscopy (ISI-XPS) analysis, is verified. The study can provide useful guidance and reference for improving activity by oxygen vacancy induced strong IEF and the development of a continuous flow PTC CO₂ reduction system.

Promoting Photocatalytic Carbon Dioxide Reduction by Tuning the Properties of Cocatalysts

Suppressing the amount of carbon dioxide in the atmosphere is an essential measure toward addressing global warming. Specifically, the photocatalytic CO2 reduction reaction (CRR) is an effective strategy because it affords the conversion of CO2 into useful carbon feedstocks by using sunlight and water. However, the practical application of photocatalyst-promoting CRR (CRR photocatalysts) requires significant improvement of their conversion efficiency. Accordingly, extensive research is being conducted toward improving semiconductor photocatalysts, as well as cocatalysts that are loaded as active sites on the photocatalysts. In this review, we summarize recent research and development trends in the improvement of cocatalysts, which have a significant impact on the catalytic activity and selectivity of photocatalytic CRR. We expect that the advanced knowledge provided on the improvement of cocatalysts for CRR in this review will serve as a general guideline to accelerate the development of highly efficient CRR photocatalysts.

Co-Dissolved Isostructural Polyoxovanadates to Construct Single-Atom-Site Catalysts for Efficient CO2 Photoreduction

We explored a co-dissolved strategy to embed mono-dispersed Pt center into V₂ O₅ support via dissolving [PtV₉ O₂₈ ]^7- into [V₁₀ O₂₈ ]^6- aqueous solution. The uniform dispersion of [PtV₉ O₂₈ ]^7- in [V₁₀ O₂₈ ]^6- solution allows [PtV₉ O₂₈ ]^7- to be surrounded by [V₁₀ O₂₈ ]^6- clusters via a freeze-drying process. The V centers in both [PtV₉ O₂₈ ]^7- and [V₁₀ O₂₈ ]^6- were converted into V₂ O₅ via a calcination process to stabilize Pt center. These double separations can effectively prevent the Pt center agglomeration during the high-temperature conversion process, and achieve 100 % utilization of Pt in [PtV₉ O₂₈ ]^7- . The resulting Pt-V₂ O₅ single-atom-site catalysts exhibit a CH₄ yield of 247.6 μmol g^-1  h^-1 , 25 times higher than that of Pt nanoparticle on the V₂ O₅ support, which was accompanied by the lactic acid photooxidation to form pyruvic acid. Systematical investigations on this unambiguous structure demonstrate an important role of Pt-O atomic pair synergy for highly efficient CO₂ photoreduction.

Design and application of g-C3N4-based materials for fuels photosynthesis from CO2 or H2O based on reaction pathway insights

Photocatalytic CO2 reduction reaction (CRR) and hydrogen evolution reaction (HER) based on graphitic carbon nitride (g-C3N4) that is regarded as the metal-free "holy grail" photocatalyst, provide promising strategies for producing next-generation fuels, contributing to achieving carbon neutrality, alleviating energy and environment crisis. However, the activity of CRR and HER over g-C3N4 leaves much to be desired. Therefore, numerous studies have sprung up to enhance photoactivity. A comprehensive understanding of the CRR and HER reaction pathways is crucial for designing g-C3N4-based materials, further promoting efficient fuel production. Different from previous reviews that focus on g-C3N4 modification from the viewpoint of material science. In this review, we divided the multistep processes of CRR and HER into five reaction pathways and summarized the latest advances for improving each pathway of fuels synthesis through CRR or HER. Meanwhile, the existing bottleneck issues of each step were also discussed. Finally, comprehensive conclusions, including the remaining challenges, outlooks, etc., for CRR and HER over g-C3N4 were put forward. We are sure that this review will conduce to the understanding of the structure-activity relationship between CRR, HER processes, and g-C3N4 structure, which can provide the reference for developing high-powered photocatalysts, not confined to g-C3N4.

Defect Engineering in CuSx/COF Hybridized Heterostructures: Synergistic Facilitation of the Charge Migration for an Efficacious Photocatalytic Conversion of CO2 into CO

The photocatalytic CO₂ reduction reaction (CO₂RR) provides an attractive approach to tackling environmental issues. To actualize the optimal catalytic efficiency, one efficacious strategy is to rationally modulate the charge migration for the adopted heterogeneous catalysts. Herein, by virtue of a one-step hydrothermal method, Cu₂S nanospheres and defect-rich Cu₂S (CuS_x) nanosheets are wrapped by a triazine-containing covalent framework (TP-TA COF), resulting in CuS_x/TP-TA and Cu₂S/TP-TA. Owing to the heterojunction construction that suppresses the carrier recombination, both hybridized structures present enhanced charge migration in comparison to that of their corresponding sulfides and COF constituents. It is worth emphasizing that CuS_x/TP-TA proffers a significantly greater photocurrent than Cu₂S/TP-TA. The subsequent photocatalytic reduction of CO₂ also exhibits an apparently higher CO evolution rate, about 2.8 times higher than the Cu₂S/TP-TA photocatalyst. The above evident improvement owes much to the heterostructure establishment between CuS_x and TP-TA COF, as well as the synergistic effect provided by the defect engineering for CuS_x, both of which are able to enhance the separation efficiency of photoinduced carriers. Our work sheds light on the rational construction of heterogeneous structures between organic and inorganic photocatalysts, which emphasizes the possible synergistic effect of defect centers for enhancing photocatalytic performance.

Back-illuminated photoelectrochemical flow cell for efficient CO2 reduction

Photoelectrochemical CO2 reduction reaction flow cells are promising devices to meet the requirements to produce solar fuels at the industrial scale. Photoelectrodes with wide bandgaps do not allow for efficient CO2 reduction at high current densities, while the integration of opaque photoelectrodes with narrow bandgaps in flow cell configurations still remains a challenge. This paper describes the design and fabrication of a back-illuminated Si photoanode promoted PEC flow cell for CO2 reduction reaction. The illumination area and catalytic sites of the Si photoelectrode are decoupled, owing to the effective passivation of defect states that allows for the long minority carrier diffusion length, that surpasses the thickness of the Si substrate. Hence, a solar-to-fuel conversion efficiency of CO of 2.42% and a Faradaic efficiency of 90% using Ag catalysts are achieved. For CO2 to C2+ products, the Faradaic efficiency of 53% and solar-to-fuel of 0.29% are achieved using Cu catalyst in flow cell.

Modified Poly(Heptazine Imides): Minimizing H2O2 Decomposition to Maximize Oxygen Reduction

Photocatalysis provides a sustainable pathway to produce the consumer chemical H2O2 from atmospheric O2 via an oxygen reduction reaction (ORR). Such an alternative is attractive to replace the cumbersome traditional anthraquinone method for H2O2 synthesis on a large scale. Carbon nitrides have shown very interesting results as heterogeneous photocatalysts in ORR because their covalent two-dimensional (2D) structure is believed to increase selectivity toward the two-electron process. However, an efficient and scalable application of carbon nitrides for this reaction is far from being achieved. Poly(heptazine imides) (PHIs) are a more powerful subgroup of carbon nitrides whose structure provides high crystallinity and a scaffold to host transition-metal single atoms. Herein, we show that PHIs functionalized with sodium and the recently reported fully protonated PHI exhibit high activity in two-electron ORR under visible light. The latter converted O2 to up to 1556 mmol L-1 h-1 g-1 H2O2 under 410 nm irradiation using inexpensive but otherwise chemically demanding glycerin as a sacrificial electron donor. We also prove that functionalization with transition metals is not beneficial for H2O2 synthesis, as the metal also catalyzes its decomposition. Transient photoluminescence spectroscopy suggests that H-PHIs exhibit higher activity due to their longer excited-state lifetime. Overall, this work highlights the high photocatalytic activity of the rarely examined fully protonated PHI and represents a step forward in the application of inexpensive covalent materials for photocatalytic H2O2 synthesis.

Interfacial Engineering of Semicoherent Interface at Purified CsPbBr3 Quantum Dots/2D-PbSe for Optimal CO2 Photoreduction Performance

Heterogeneous photocatalysts are extensively used to achieve interfacial electric fields for acceleration of oriented charge carrier transport and further promotion of photocatalytic redox reactions. Unfortunately, the incoherent interfaces are almost present in the heterostructures owing to large lattice mismatch accompanied by the interfacial defects and high density of gap states, acting as high energy barriers for charge migration. In this work, we report the atomic engineering of CsPbBr₃/PbSe heterogeneous interfaces and conversion from incoherent features to semicoherent characters via methyl acetate (MeOAc) purification of CsPbBr₃ quantum dots (QDs) before composited with two-dimensional (2D)-PbSe, which is confirmed by high-resolution transmission electron microscopy. The photocatalytic performances and theoretical calculations indicate that semicoherent interfaces are favorable for improving the activity and reactivity of the heterostructure, triggering 3 times enhanced photocatalytic CO₂ reduction rate with 91% selectivity and satisfactory stability. This study proposes a facile method for photocatalytic heterojunctions to transform incoherent interfaces to photocatalytically beneficial semicoherent boundaries, accompanying with a systematic analysis of the consequent chemical dynamics to demonstrate the mechanism of the semicoherent interface for supporting photocatalysis. The understandings gained from this work are valuable for rational interfacial lattice engineering of heterogeneous photocatalysts for efficient solar fuel production.

Copper-Based Catalysts for Electrochemical Carbon Dioxide Reduction to Multicarbon Products

Electrochemical conversion of carbon dioxide into fuel and chemicals with added value represents an appealing approach to reduce the greenhouse effect and realize a carbon-neutral cycle, which has great potential in mitigating global warming and effectively storing renewable energy. The electrochemical CO2 reduction reaction (CO2RR) usually involves multiproton coupling and multielectron transfer in aqueous electrolytes to form multicarbon products (C2+ products), but it competes with the hydrogen evolution reaction (HER), which results in intrinsically sluggish kinetics and a complex reaction mechanism and places higher requirements on the design of catalysts. In this review, the advantages of electrochemical CO2 reduction are briefly introduced, and then, different categories of Cu-based catalysts, including monometallic Cu catalysts, bimetallic catalysts, metal-organic frameworks (MOFs) along with MOF-derived catalysts and other catalysts, are summarized in terms of their synthesis method and conversion of CO2 to C2+ products in aqueous solution. The catalytic mechanisms of these catalysts are subsequently discussed for rational design of more efficient catalysts. In response to the mechanisms, several material strategies to enhance the catalytic behaviors are proposed, including surface facet engineering, interface engineering, utilization of strong metal-support interactions and surface modification. Based on the above strategies, challenges and prospects are proposed for the future development of CO2RR catalysts for industrial applications.

Graphical Abstract

Cooperative Coupling of H2 O2 Production and Organic Synthesis over a Floatable Polystyrene-Sphere-Supported TiO2 /Bi2 O3 S-Scheme Photocatalyst

Cooperative coupling of photocatalytic H₂ O₂ production with organic synthesis has an expansive perspective in converting solar energy into storable chemical energy. However, traditional powder photocatalysts suffer from severe agglomeration, limited light absorption, poor gas reactant accessibility, and reusable difficulty, which greatly hinders their large-scale application. Herein, floatable composite photocatalysts are synthesized by immobilizing hydrophobic TiO₂ and Bi₂ O₃ on lightweight polystyrene (PS) spheres via hydrothermal and photodeposition methods. The floatable photocatalysts are not only solar transparent, but also upgrade the contact between reactants and photocatalysts. Thus, the floatable step-scheme (S-scheme) TiO₂ /Bi₂ O₃ photocatalyst exhibits a drastically enhanced H₂ O₂ yield of 1.15 mm h^-1 and decent furfuryl alcohol conversion to furoic acid synchronously. Furthermore, the S-scheme mechanism and dynamics are systematically investigated by in situ irradiated X-ray photoelectron spectroscopy and femtosecond transient absorption spectrum analyses. In situ Fourier transform infrared spectroscopy and density functional theory calculations reveal the mechanism of furoic acid evolution. The ingenious design of floatable photocatalysts not only furnishes insight into maximizing photocatalytic reaction kinetics but also provides a new route for highly efficient heterogeneous catalysis.

Assembly of Hydrophobic ZIF-8 on CeO2 Nanorods as High-Efficiency Catalyst for Electrocatalytic Nitrogen Reduction Reaction

The electrocatalytic nitrogen reduction reaction (NRR) can use renewable electricity to convert water and N2 into NH3 under normal temperature and pressure conditions. However, due to the competitiveness of the hydrogen evolution reaction (HER), the ammonia production rate (RNH3) and Faraday efficiency (FE) of NRR catalysts cannot meet the needs of large-scale industrialization. Herein, by assembling hydrophobic ZIF-8 on a cerium oxide (CeO2) nanorod, we designed an excellent electrocatalyst CeO2-ZIF-8 with intrinsic NRR activity. The hydrophobic ZIF-8 surface was conducive to the efficient three-phase contact point of N2 (gas), CeO2 (solid) and electrolyte (liquid). Therefore, N2 is concentrated and H+ is deconcentrated on the CeO2-ZIF-8 electrocatalyst surface, which improves NRR and suppresses HER and finally CeO2-ZIF-8 exhibits excellent NRR performance with an RNH3 of 2.12 μg h-1 cm-2 and FE of 8.41% at -0.50 V (vs. RHE). It is worth noting that CeO2-ZIF-8 showed excellent stability in the six-cycle test, and the RNH3 and FE variation were negligible. This study paves a route for inhibiting the competitive reaction to improve the NRR catalyst activity and may provide a new strategy for NRR catalyst design.

Alkyl group-decorated g-C3N4 for enhanced gas-phase CO2 photoreduction

With excellent physical/chemical stability and feasible synthesis, g-C₃N₄ has attracted much attention in the field of photocatalysis. However, its weak photoactivity limits its practical applications. Herein, by easily planting hydrophobic alkyl groups onto g-C₃N₄, the hydrophilicity of g-C₃N₄ can be well regulated and its specific surface area be enlarged simultaneously. Such a modification ensures enhanced CO₂ capture and increased active sites. In addition, the introduction of alkyl groups endows g-C₃N₄ with abundant charge density and efficient separation of photoinduced excitons. All these advantages synergistically contribute to the enhanced photocatalytic CO₂ reduction performance over the optimized catalyst (DCN90), and the total CO₂ conversion is 7.4-fold that of pristine g-C₃N₄ (CN).