Hybrid Organic-Inorganic Antiperovskites

Influence of O-H⋅⋅⋅Pt interactions on photoluminescent response in the (Et4N)2{[Pt(bph)(CN)2][phenylene-1,4-diresorcinol]} framework

Tunable photoluminescence (PL) is one of the hot topics in current materials science, and research performed on the molecular phases is at the forefront of this field. We present the new (Et4N)2[PtII(bph)(CN)2]⋅rez3⋅1/3H2O (Pt2rez3) (bph=biphenyl-2,2'-diyl; rez3=3,3",5,5"-tetrahydroxy-1,1':4',1"-terphenyl, phenylene-1,4-diresorcinol coformer, a linear quaternary hydrogen bond donor) co-crystal salt based on the recently appointed promising [PtII(bph)(CN)2]2- luminophore. Within the extended hydrogen-bonded subnetwork [PtII(bph)(CN)2]2- complexes and rez3 coformer molecules form two types of contacts: the rez3O-H⋅⋅⋅Ncomplex ones in the equatorial plane of the complex and non-typical rez3O-H⋅⋅⋅Pt ones along its axial direction. The combined structural, PL, and DFT approach identified the rez3O-H⋅⋅⋅Pt synthons to be crucial in promoting the noticeable uniform redshift of bph ligand centered (LC) emission compared to the LC emission of the (Et4N)2[PtII(bph)(CN)2]⋅H2O (Pt2) precursor, owing to the direct interference of the phenol group with the PtII-bph orbital system via altering the CT processes within. The high-resolution emission spectra for Pt2 and Pt2rez3 were successfully reproduced at 77 K by using the Franck-Cordon expressions. The possibility to tune PL properties along the plausible continuum of rez3O-H⋅⋅⋅Pt synthons is indicated, considering various scenarios of molecular occupation of the space above and below the complex plane.

Building a Charge Transfer Bridge between g-C3N4 and Perovskite with Molecular Engineering to Achieve Efficient Perovskite Solar Cells

Effective defect passivation and efficient charge transfer within polycrystalline perovskite grains and corresponding boundaries are necessary to achieve highly efficient perovskite solar cells (PSCs). Herein, focusing on the boundary location of g-C3N4 during the crystallization modulation on perovskite, molecular engineering of 4-carboxyl-3-fluorophenylboronic acid (BF) on g-C3N4 was designed to obtain a novel additive named BFCN. With the help of the strong bonding ability of BF with both g-C3N4 and perovskite and favorable intramolecular charge transfer within BFCN, not only has the crystal quality of perovskite films been improved due to the effective defects passivation, but the charge transfer has also been greatly accelerated due to the formation of additional charge transfer channels on the grain boundaries. As a result, the champion BFCN-based PSCs achieve the highest photoelectric conversion efficiency (PCE) of 23.71% with good stability.

H/F Substitution Achieved Enantiomeric Organic Inorganic Hybrid Perovskites and Trigonal Structure [DMFP]3(CdBr3)(CdBr4)

Organic-inorganic hybrid perovskites (OIHPs) have been emerging as a hot research topic due to their potential applications in energy storage, semiconductors, and electronic devices. Herein, we systematically investigated the synthesis and phase transition behaviors of the enantiomeric OIHPs, (R) and (S)-N,N-dimethyl-3-fluoropyrrolidinium cadmium bromide ([DMFP][CdBr3]), and the hybrid trigonal structure [DMFP]3 (CdBr3)(CdBr4). The enantiomers have a mirror-symmetric structure and enhanced solid-state phase transition points of 417 and 443 K, in contrast to the nonfluorinated parent compound, N,N-dimethyl-pyrrolidinium cadmium bromide ([DMP][CdBr3], 385 K). Moreover, racemic H/F substitution on the pyrrolidinium cations leads to the formation of a trigonal compound, showing above-room-temperature structural phase transition and dominant ferroelasticity. This work discovers chiral enantiomeric OIHPs through H/F substitution, demonstrating a useful chemical synthesis strategy for exploring novel phase transition materials.

Broken-gap type-III band alignment in monolayer halide perovskite/antiperovskite oxide van der Waals heterojunctions

The integration of halide perovskites with other functional materials provides a new platform for applications beyond photovoltaics, which has been realized in experiments. Here, through first-principles methods, we explore the possibility of constructing halide perovskite/antiperovskite oxide van der Waals heterostructures (vdWHs) for the first time with monolayers Rb₂CdCl₄ and Ba₄OSb₂ as representative compounds. Our calculation results reveal that the Rb₂CdCl₄/Ba₄OSb₂ vdWHs have negative binding energies and their most stable stacking possesses a rare type-III band alignment with a broken gap, which is highly promising for tunnel field-effect transistor (TFET) applications. Moreover, their electronic features can be further tuned by applying strain or an external electric field. Specifically, compressive strain can enlarge the tunneling window, while tensile strain can realize a type-III to type-II band alignment transformation. Therefore, our work provides fundamental insights into the electronic properties of Rb₂CdCl₄/Ba₄OSb₂ vdWHs and paves the way for the design and fabrication of future halide perovskite/antiperovskite-based TFETs.

Establishing Family Relations in Group 15 Halogenido Metalates with the Largest Molecular Antimony Iodide Anion

Studying structurally related families of compounds is a valuable tool in understanding and predicting material properties and has been extensively used for metal halide perovskites. Due to the variable anion structures in group 15 halogenido metalates, similar family relations are still largely missing. Herein, we present compounds featuring the [Sb_2n I_6n+4 ]^4- family of anions, including the first n=5 member in [Hpyz]₄ [Sb₁₀ I₃₄ ] (Hpyz=pyrazinium), which contains the largest halogenido pentelate anion reported to date. The optical properties of compounds featuring n=1-5 anions show a clear trend as well as an outlier, a low band gap of 1.72 eV for [Hpyz]₄ [Sb₁₀ I₃₄ ], that can be well understood using quantum chemical investigations. Also using SbI₃ and [H₂ NMe₂ ]₃ [SbI₆ ], a compound featuring a single octahedral [SbI₆ ]^3- unit, as limiting cases, we show that structure-property relationships can be established in group 15 halogenido metalates in a similar way as in metal halide perovskites, thus providing a framework for understanding new and known compounds in this emerging class of materials.

Supramolecular cis-“Bis(Chelation)” of [M(CN)6]3− (M = CrIII, FeIII, CoIII) by Phloroglucinol (H3PG)

Studies on molecular co-crystal type materials are important in the design and preparation of easy-to-absorb drugs, non-centrosymmetric, and chiral crystals for optical performance, liquid crystals, or plastic phases. From a fundamental point of view, such studies also provide useful information on various supramolecular synthons and molecular ordering, including metric parameters, molecular matching, energetical hierarchy, and combinatorial potential, appealing to the rational design of functional materials through structure–properties–application schemes. Co-crystal salts involving anionic d-metallate coordination complexes are moderately explored (compared to the generality of co-crystals), and in this context, we present a new series of isomorphous co-crystalline salts (PPh4)3[M(CN)6](H3PG)2·2MeCN (M = Cr, 1; Fe, 2; Co 3; H3PG = phloroglucinol, 1,3,5-trihydroxobenzene). In this study, 1–3 were characterized experimentally using SC XRD, Hirshfeld analysis, ESI-MS spectrometry, vibrational IR and Raman, 57Fe Mössbauer, electronic absorption UV-Vis-NIR, and photoluminescence spectroscopies, and theoretically with density functional theory calculations. The two-dimensional square grid-like hydrogen-bond {[M(CN)6]3−;(H3PG)2}∞ network features original {[M(CN)6]3−;(H3PG)4} supramolecular cis-bis(chelate) motifs involving: (i) two double cyclic hydrogen bond synthons M(-CN⋅⋅⋅HO-)2Ar, {[M(CN)6]3−;H2PGH}, between cis-oriented cyanido ligands of [M(CN)6]3− and resorcinol-like face of H3PG, and (ii) two single hydrogen bonds M-CN⋅⋅⋅HO-Ar, {[M(CN)6]3−;HPGH2}, involving the remaining two cyanide ligands. The occurrence of the above tectonic motif is discussed with regard to the relevant data existing in the CCDC database, including the multisite H-bond binding of [M(CN)6]3− by organic species, mononuclear coordination complexes, and polynuclear complexes. The physicochemical and computational characterization discloses notable spectral modifications under the regime of an extended hydrogen bond network.

Using a Porphyrin Diacid Cation to Stabilize a Square-Pyramidal BiX5 (X = Br, Cl/Br) Unit

Main-group halogenido metalates are a diverse class of compounds with an intricate structural chemistry and a wide range of applications. Here, we present an unprecedented anion motif in the structural chemistry of halogenido bismuthates, a square-pyramidal BiX₅ unit. We show how the porphyrin diacid used as our compounds' counterion is templating the formation of this new motif, suggesting that other strong anion receptors may be able to stabilize unique metalate anions in future work.

Crystal structures and phase transitions of imidazolium hypodiphosphates

Two imidazolium hypodiphosphates, (C₃H₅N₂)(H₃P₂O₆) (I) and (C₃H₅N₂)₂(H₂P₂O₆) (II), have been synthesized and structurally characterized. In both metal-free organic-inorganic hybrids (I) and (II), the hypodiphosphate mono- and dianions, (H₃P₂O₆)^- and (H₂P₂O₆)^2-, form hydrogen-bonded frameworks of different types, to which the organic cations are linked via N-H...O and C-H...O hydrogen bonds. The purity of the compounds was confirmed by powder X-ray diffraction. Differential scanning calorimetry of compound (I) revealed two structural phase transitions: continuous at 311.8 K [cooling/heating; from high-temperature phase (HTP) to room-temperature phase (RTP)] and a discontinuous one at 287.9/289.2 K [RTP → low-temperature phase (LTP)]. Compound (I) is characterized in a wide temperature range by single-crystal and powder X-ray diffraction methods. Crystal structures of high- and low-temperature phases are determined, which show orthorhombic (HTP, Pnna, No. 52) → monoclinic (LTP, P2₁/n11, No. 14, a-axis doubled) structural change on cooling with an intermediate incommensurately modulated phase (RTP). Dynamic properties of polycrystalline (I) were studied by means of dielectric spectroscopy. The dielectric behaviour is explained by the motion of imidazolium cations.

Three-Dimensional Metal-Free Molecular Perovskite with a Thermally Induced Switchable Dielectric Response

Temperature-responsive materials with switching physical properties have been widely researched. Among them, the switchable dielectric perovskite materials show potential applications in the electrical and electronic industries and even the intelligence industries. However, perovskite oxides and hybrid organic-inorganic perovskites, as the most representative switchable dielectric materials, are limited by bad biocompatibility. Herein, we report temperature-dielectric-responsive metal-free perovskite (H₂dabco)(NH₄)[BF₄]₃ constructed by the strategy of substituting the B site in the general formula ABX₃ (doubly protonated 1,4-diazabicyclo[2.2.2]octane = H₂dabco). Meanwhile, structurally similar hybrid material (H₂dabco)Rb[BF₄]₃ was designed as a control. They exhibit similar phase-transition characteristics and dielectric response behaviors around 333 K. More interestingly, the ordered-disordered transformation of their organic "spherical" cations (H₂dabco) was deemed to produce their phase transitions and dielectric response switching. Given its ability to generate a dielectric response, (H₂dabco)(NH₄)[BF₄]₃ will show the potential application of metal-free perovskite in a future thermal sensing device.