Intercalated Iridium Diselenide Electrocatalysts for Efficient pH-Universal Water Splitting

Essential features of weak current for excellent enhancement of NOx reduction over monoatomic V-based catalyst

Human society is facing increasingly serious problems of environmental pollution and energy shortage, and up to now, achieving high NH3-SCR activity at ultra-low temperatures (<150 °C) remains challenging for the V-based catalysts with V content below 2%. In this study, the monoatomic V-based catalyst under the weak current-assisted strategy can completely convert NOx into N2 at ultra-low temperature with V content of 1.36%, which shows the preeminent turnover frequencies (TOF145 °C = 1.97×10-3 s-1). The improvement of catalytic performance is mainly attributed to the enhancement catalysis of weak current (ECWC) rather than electric field, which significantly reduce the energy consumption of the catalytic system by more than 90%. The further mechanism research for the ECWC based on a series of weak current-assisted characterization means and DFT calculations confirms that migrated electrons mainly concentrate around the V single atoms and increase the proportion of antibonding orbitals, which make the V-O chemical bond weaker (electron scissors effect) and thus accelerate oxygen circulation. The novel current-assisted catalysis in the present work can potentially apply to other environmental and energy fields.

Bifunctional Electrocatalysts for Overall and Hybrid Water Splitting

Electrocatalytic water splitting driven by renewable electricity has been recognized as a promising approach for green hydrogen production. Different from conventional strategies in developing electrocatalysts for the two half-reactions of water splitting (e.g., the hydrogen and oxygen evolution reactions, HER and OER) separately, there has been a growing interest in designing and developing bifunctional electrocatalysts, which are able to catalyze both the HER and OER. In addition, considering the high overpotentials required for OER while limited value of the produced oxygen, there is another rapidly growing interest in exploring alternative oxidation reactions to replace OER for hybrid water splitting toward energy-efficient hydrogen generation. This Review begins with an introduction on the fundamental aspects of water splitting, followed by a thorough discussion on various physicochemical characterization techniques that are frequently employed in probing the active sites, with an emphasis on the reconstruction of bifunctional electrocatalysts during redox electrolysis. The design, synthesis, and performance of diverse bifunctional electrocatalysts based on noble metals, nonprecious metals, and metal-free nanocarbons, for overall water splitting in acidic and alkaline electrolytes, are thoroughly summarized and compared. Next, their application toward hybrid water splitting is also presented, wherein the alternative anodic reactions include sacrificing agents oxidation, pollutants oxidative degradation, and organics oxidative upgrading. Finally, a concise statement on the current challenges and future opportunities of bifunctional electrocatalysts for both overall and hybrid water splitting is presented in the hope of guiding future endeavors in the quest for energy-efficient and sustainable green hydrogen production.

Pt-Modified High Entropy Rare Earth Oxide for Efficient Hydrogen Evolution in pH-Universal Environments

The development of efficient and stable catalysts for hydrogen production from electrolytic water in a wide pH range is of great significance in alleviating the energy crisis. Herein, Pt nanoparticles (NPs) anchored on the vacancy of high entropy rare earth oxides (HEREOs) were prepared for the first time for highly efficient hydrogen production by water electrolysis. The prepared Pt-(LaCeSmYErGdYb)O showed excellent electrochemical performances, which require only 12, 57, and 77 mV to achieve a current density of 100 mA cm-2 in 0.5 M H2SO4, 1.0 M KOH, and 1.0 M PBS environments, respectively. In addition, Pt-(LaCeSmYErGdYb)O has successfully worked at 400 mA cm-2 @ 60 °C for 100 h in 0.5 M H2SO4, presenting the high mass activity of 37.7 A mg-1Pt and turnover frequency (TOF) value of 38.2 s-1 @ 12 mV, which is far superior to the recently reported hydrogen evolution reaction (HER) catalysts. Density functional theory (DFT) calculations have revealed that the interactions between Pt and HEREO have optimized the electronic structures for electron transfer and the binding strength of intermediates. This further leads to optimized proton binding and water dissociation, supporting the highly efficient and robust HER performances in different environments. This work provides a new idea for the design of efficient RE-based electrocatalysts.

Constructing regulable supports via non-stoichiometric engineering to stabilize ruthenium nanoparticles for enhanced pH-universal water splitting

Establishing appropriate metal-support interactions is imperative for acquiring efficient and corrosion-resistant catalysts for water splitting. Herein, the interaction mechanism between Ru nanoparticles and a series of titanium oxides, including TiO, Ti4O7 and TiO2, designed via facile non-stoichiometric engineering is systematically studied. Ti4O7, with the unique band structure, high conductivity and chemical stability, endows with ingenious metal-support interaction through interfacial Ti-O-Ru units, which stabilizes Ru species during OER and triggers hydrogen spillover to accelerate HER kinetics. As expected, Ru/Ti4O7 displays ultralow overpotentials of 8 mV and 150 mV for HER and OER with a long operation of 500 h at 10 mA cm-2 in acidic media, which is expanded in pH-universal environments. Benefitting from the excellent bifunctional performance, the proton exchange membrane and anion exchange membrane electrolyzer assembled with Ru/Ti4O7 achieves superior performance and robust operation. The work paves the way for efficient energy conversion devices.

Modulating Electronic Structure by Etching Strategy to Construct NiSe2 /Ni0.85 Se Heterostructure for Urea-Assisted Hydrogen Evolution Reaction

Exploring and developing novel strategies for constructing heterostructure electrocatalysts is still challenging for water electrolysis. Herein, a creative etching treatment strategy is adopted to construct NiSe2 /Ni0.85 Se heterostructure. The rich heterointerfaces between NiSe2 and Ni0.85 Se emerge strong electronic interaction, which easily induces the electron transfer from NiSe2 to Ni0.85 Se, and tunes the charge-state of NiSe2 and Ni0.85 Se. In the NiSe2 /Ni0.85 Se heterojunction nanomaterial, the higher charge-state Ni0.85 Se is capable of affording partial electrons to combine with hydrogen protons, inducing the rapid formation of H2 molecule. Accordingly, the lower charge-state NiSe2 in the NiSe2 /Ni0.85 Se heterojunction nanomaterial is more easily oxidized into high valence state Ni3+ during the oxygen evolution reaction (OER) process, which is beneficial to accelerate the mass/charge transfer and enhance the electrocatalytic activities towards OER. Theoretical calculations indicate that the heterointerfaces are conducive to modulating the electronic structure and optimizing the adsorption energy toward intermediate H* during the hydrogen evolution reaction (HER) process, leading to superior electrocatalytic activities. To expand the application of the NiSe2 /Ni0.85 Se-2h electrocatalyst, urea is served as the adjuvant to proceed with the energy-saving hydrogen production and pollutant degradation, and it is proven to be a brilliant strategy.

Robust Ru-VO2 Bifunctional Catalysts for All-pH Overall Water Splitting

Designing robust bifunctional catalysts for oxygen evolution reaction (OER) and hydrogen evolution reaction in all-pH conditions for overall water splitting (OWS) is an effective way to achieve sustainable development. Herein, a composite Ru-VO2 containing Ru-doped VO2 and Ru nanoparticles (NPs) is synthesized, and it shows a high OWS performance in full-pH range due to their synergist effect. In particular, the OER mass activities of Ru-VO2 at 1.53 V (vs RHE) in acidic, alkaline, and PBS solutions are ≈65, 36, and 235 times of commercial RuO2 in the same conditions. The "Ru-VO2 || Ru-VO2 " two-electrode electrolyzer only needs a voltage of 1.515 V (at 10 mA cm-2 ) in acidic water splitting, which can operate stably for 125 h at 10 mA cm-2 without significant voltage decay. In situ Raman spectra and in situ differential electrochemical mass spectrometry prove that the OER of Ru-VO2 in acid follows the adsorption evolution mechanism. Density functional theory calculations further reveal the synergistic effect between Ru NP and Ru-doped VO2 , which breaks the hydrogen bond network formed by *OH adsorbed on the Ru single-atom site, and thereby significantly enhances the OER activity. This work provides new insights into the design of novel bifunctional pH-universal catalysts for OWS.

Boosting electrocatalytic performance via electronic structure regulation for acidic oxygen evolution

High-purity hydrogen produced by water electrolysis has become a sustainable energy carrier. Due to the corrosive environments and strong oxidizing working conditions, the main challenge faced by acidic water oxidation is the decrease in the activity and stability of anodic electrocatalysts. To address this issue, efficient strategies have been developed to design electrocatalysts toward acidic OER with excellent intrinsic performance. Electronic structure modification achieved through defect engineering, doping, alloying, atomic arrangement, surface reconstruction, and constructing metal-support interactions provides an effective means to boost OER. Based on introducing OER mechanism commonly present in acidic environments, this review comprehensively summarizes the effective strategies for regulating the electronic structure to boost the activity and stability of catalytic materials. Finally, several promising research directions are discussed to inspire the design and synthesis of high-performance acidic OER electrocatalysts.

Phase Engineering and Synchrotron-Based Study on Two-Dimensional Energy Nanomaterials

In recent years, there has been significant interest in the development of two-dimensional (2D) nanomaterials with unique physicochemical properties for various energy applications. These properties are often derived from the phase structures established through a range of physical and chemical design strategies. A concrete analysis of the phase structures and real reaction mechanisms of 2D energy nanomaterials requires advanced characterization methods that offer valuable information as much as possible. Here, we present a comprehensive review on the phase engineering of typical 2D nanomaterials with the focus of synchrotron radiation characterizations. In particular, the intrinsic defects, atomic doping, intercalation, and heterogeneous interfaces on 2D nanomaterials are introduced, together with their applications in energy-related fields. Among them, synchrotron-based multiple spectroscopic techniques are emphasized to reveal their intrinsic phases and structures. More importantly, various in situ methods are employed to provide deep insights into their structural evolutions under working conditions or reaction processes of 2D energy nanomaterials. Finally, conclusions and research perspectives on the future outlook for the further development of 2D energy nanomaterials and synchrotron radiation light sources and integrated techniques are discussed.

Arming Ru with Oxygen-Vacancy-Enriched RuO2 Sub-Nanometer Skin Activates Superior Bifunctionality for pH-Universal Overall Water Splitting

Water electrolysis has been expected to assimilate the renewable yet intermediate energy-derived electricity for green H₂ production. However, current benchmark anodic catalysts of Ir/Ru-based compounds suffer severely from poor dissolution resistance. Herein, an effective modification strategy is proposed by arming a sub-nanometer RuO₂ skin with abundant oxygen vacancies to the interconnected Ru clusters/carbon hybrid microsheet (denoted as Ru@V-RuO₂ /C HMS), which can not only inherit the high hydrogen evolution reaction (HER) activity of the Ru, but more importantly, activate the superior activity toward the oxygen evolution reaction (OER) in both acid and alkaline conditions. Outstandingly, it can achieve an ultralow overpotential of 176/201 mV for OER and 46/6 mV for the HER to reach 10 mA cm^-2 in acidic and alkaline solution, respectively. Inspiringly, the overall water splitting can be driven with an ultrasmall cell voltage of 1.467/1.437 V for 10 mA cm^-2 in 0.5 m H₂ SO₄ /1.0 m KOH, respectively. Density functional theory calculations reveal that armoring the oxygen-vacancy-enriched RuO₂ exoskeleton can cooperatively alter the interfacial electronic structure and make the adsorption behavior of hydrogen and oxygen intermediates much close to the ideal level, thus simultaneously speeding up the hydrogen evolution kinetics and decreasing the energy barrier of oxygen release.

Cu-Doped Heterointerfaced Ru/RuSe2 Nanosheets with Optimized H and H2 O Adsorption Boost Hydrogen Evolution Catalysis

Ruthenium chalcogenide is a highly promising catalytic system as a Pt alternative for hydrogen evolution reaction (HER). However, well-studied ruthenium selenide (RuSe₂ ) still exhibits sluggish HER kinetics in alkaline media due to the inappropriate adsorption strength of H and H₂ O. Herein, xx report a new design of Cu-doped Ru/RuSe₂ heterogeneous nanosheets (NSs) with optimized H and H₂ O adsorption strength for highly efficient HER catalysis in alkaline media. Theoretical calculations reveal that the superior HER performance is attributed to a synergistic effect of the unique heterointerfaced structure and Cu doping, which not only optimizes the electronic structure with a suitable d-band center to suppress proton overbinding but also alleviates the energy barrier with enhanced H₂ O adsorption. As a result, Cu-doped heterogeneous Ru/RuSe₂ NSs exhibit a small overpotential of 23 mV at 10 mA cm^-2 , a low Tafel slope of 58.5 mV dec^-1 and a high turnover frequency (TOF) value of 0.88 s^-1 at 100 mV for HER in alkaline media, which is among the best catalysts in noble metal-based electrocatalysts toward HER. The present Cu-doped Ru/RuSe₂ NSs interface catalyst is very stable for HER by showing no activity decay after 5000-cycle potential sweeps. This work heralds that heterogeneous interface modulation opens up a new strategy for the designing of more efficient electrocatalysts.

Semicrystalline IrOx with Abundant Boundaries for Overall Water Splitting

Inorganic compounds with different crystalline and amorphous states may show distinct properties in catalytic applications. In this work, we control the crystallization level by fine thermal treatment and synthesize a semicrystalline IrO_x material with the formation of abundant boundaries. Theoretical calculation reveals that the interfacial iridium with a high degree of unsaturation is highly active for the hydrogen evolution reaction compared to individual counterparts based on the optimal binding energy with hydrogen (H*). At the heat treatment temperature of 500 °C, the obtained IrO_x-500 catalyst has dramatically promoted hydrogen evolution kinetics, endowing the iridium catalyst with a bifunctional activity for acidic overall water splitting with a total voltage of only 1.554 V at a current density of 10 mA cm^-2. In light of the remarkable boundary-enhanced catalysis effects, the semicrystalline material should be further developed for other applications.

High-Valence-Manganese Driven Strong Anchoring of Iridium Species for Robust Acidic Water Oxidation

Designing an efficient and durable electrocatalyst for the sluggish anodic oxygen evolution reaction (OER) has been the primary goal of using proton exchange membrane electrolyzer owing to the highly acidic and oxidative environment at the anode. In this work, it is reported that high-valence manganese drives the strong anchoring of the Ir species on the manganese dioxide (MnO₂ ) matrix via the formation of an Mn-O-Ir coordination structure through a hydrothermal-redox reaction. The iridium (Ir)-atom-array array is firmly anchored on the Mn-O-Ir coordination structure, endowing the catalyst with excellent OER activity and stability in an acidic environment. Ir-MnO₂ (160)-CC shows an ultralow overpotential of 181 mV at j = 10 mA cm^-2 and maintains long-term stability of 180 h in acidic media with negligible decay, superior to most reported electrocatalysts. In contrast, when reacting with low-valence MnO₂ , Ir species tend to aggregate into IrO_x nanoparticles, leading to poor OER stability. Density functional theory (DFT) calculations further reveal that the formation of the Mn-O-Ir coordination structure can optimize the adsorption strength of *OOH intermediates, thus boosting the acidic OER activity and stability.

Enhanced Acidic Water Oxidation by Dynamic Migration of Oxygen Species at the Ir/Nb2 O5-x Catalyst/Support Interfaces

Catalyst/support interaction plays a vital role in catalysis towards acidic oxygen evolution (OER), and the performance reinforcement is currently interpreted by either strain or electron donation effect. We herein report that these views are insufficient, where the dynamic evolution of the interface under potential bias must be considered. Taking Nb₂ O_5-x supported iridium (Ir/Nb₂ O_5-x ) as a model catalyst, we uncovered the dynamic migration of oxygen species between IrO_x and Nb₂ O_5-x during OER. Direct spectroscopic evidence combined with theoretical computation suggests these migrations not only regulate the in situ Ir structure towards boosted activity, but also suppress its over-oxidation via spontaneously delivering excessive oxygen from IrO_x to Nb₂ O_5-x . The optimized Ir/Nb₂ O_5-x thus demonstrated exceptional performance in scalable water electrolyzers, i.e., only need 1.839 V to attain 3 A cm^-2 (surpassing the DOE 2025 target), and no activity decay during a 2000 h test at 2 A cm^-2 .

A Bioinspired Hierarchical Fast Transport Network Boosting Electrochemical Performance of 3D Printed Electrodes

Current 3D printed electrodes suffer from insufficient multiscale transport speed, which limits the improvement of electrochemical performance of 3D printed electrodes. Herein, a bioinspired hierarchical fast transport network (HFTN) in a 3D printed reduced graphene oxide/carbon nanotube (3DP GC) electrode demonstrating superior electrochemical performance is constructed. Theoretical calculations reveal that the HFTN of the 3DP GC electrode increases the ion transport rate by more than 50 times and 36 times compared with those of the bulk GC electrode and traditional 3DP GC (T-3DP GC) electrode, respectively. Compared with carbon paper, carbon cloth, bulk GC electrode, and T-3DP GC electrode, the HFTN in 3DP GC electrode endows obvious advantages: i) efficient utilization of surface area for uniform catalysts dispersion during electrochemical deposition; ii) efficient utilization of catalysts enables the high mass activity of catalysts and low overpotential of electrode in electrocatalytic reaction. The cell of 3DP GC/Ni-NiO||3DP GC/NiS₂ demonstrates a low voltage of only 1.42 V to reach 10 mA cm^-2 and good stability up to 20 h for water splitting in alkaline conditions, which is superior to commercialized Pt/C||RuO₂ . This work demonstrates great potential in developing high-performance 3D printed electrodes for electrochemical energy conversion and storage.

Oxygen Evolution Electrocatalysts for the Proton Exchange Membrane Electrolyzer: Challenges on Stability

Hydrogen generated by proton exchange membrane (PEM) electrolyzer holds a promising potential to complement the traditional energy structure and achieve the global target of carbon neutrality for its efficient, clean, and sustainable nature. The acidic oxygen evolution reaction (OER), owing to its sluggish kinetic process, remains a bottleneck that dominates the efficiency of overall water splitting. Over the past few decades, tremendous efforts have been devoted to exploring OER activity, whereas most show unsatisfying stability to meet the demand for industrial application of PEM electrolyzer. In this review, systematic considerations of the origin and strategies based on OER stability challenges are focused on. Intrinsic deactivation of the material and the extrinsic balance of plant-induced destabilization are summarized. Accordingly, rational strategies for catalyst design including doping and leaching, support effect, coordination effect, strain engineering, phase and facet engineering are discussed for their contribution to the promoted OER stability. Moreover, advanced in situ/operando characterization techniques are put forward to shed light on the OER pathways as well as the structural evolution of the OER catalyst, giving insight into the deactivation mechanisms. Finally, outlooks toward future efforts on the development of long-term and practical electrocatalysts for the PEM electrolyzer are provided.

OH spectator at IrMo intermetallic narrowing activity gap between alkaline and acidic hydrogen evolution reaction

The sluggish kinetics of the hydrogen evolution reaction in base has resulted in large activity gap between acidic and alkaline electrolytes. Here, we present an intermetallic IrMo electrocatalyst supported on carbon nanotubes that exhibits a specific activity of 0.95 mA cm⁻² at the overpotential of 15 mV, which is 14.4 and 9.5 times of those for Ir/C and Pt/C, respectively. More importantly, its activities in base are fairly close to that in acidic electrolyte and the activity gap between acidic and alkaline media is only one fourth of that for Ir/C. DFT calculations reveal that the stably-adsorbed OH spectator at Mo site of IrMo can stabilize the water dissociation product, resulting in a thermodynamically favorable water dissociation process. Beyond offering an advanced electrocatalyst, this work provides a guidance to rationally design the desirable HER electrocatalysts for alkaline water splitting by the stably-adsorbed OH spectator.

While alkaline water electrolysis offers a green means for hydrogen production, H₂-evolving catalysts typically show worse activities in alkaline media than in acid. Here, authors examine IrMo intermetallics as electrocatalysts and identify a stably-adsorbed OH spectator in promoting performances.

Hierarchical Metal Sulfides Heterostructure as Superior Bifunctional Electrode for Overall Water Splitting

The development of highly active bifunctional electrocatalysts for overall water splitting is of significant importance, but huge challenges remain. The key element depends on engineering the electronic structure and surface properties of material to achieve improved catalytic activity. Herein, a hierarchical nanowire array of metal sulfides heterostructure on nickel foam (FeCoNiS_x /NF) was designed as a novel type of hybrid electrocatalyst for overall water splitting. The hybrid structure endowed plenty of catalytic active sites, strong electronic interactions, and high interfacial charge transferability, leading to superior bifunctional performance. As a result, the FeCoNiS_x /NF catalyst delivered low overpotentials of 97 and 260 mV at the current density of 50 mA cm^-2 for hydrogen and oxygen evolution reactions, respectively. Moreover, the FeCoNiS_x /NF-based water electrolyzer exhibited a small potential of 1.57 V for a high current density of 50 mA cm^-2 . These results indicate the promising application potential of FeCoNiS_x /NF electrode for hydrogen generation. This work provides a new approach to develop robust hybrid materials as the highly active electrode for electrocatalytic water splitting.

Single-site Pt-doped RuO2 hollow nanospheres with interstitial C for high-performance acidic overall water splitting

Realizing stable and efficient overall water splitting is highly desirable for sustainable and efficient hydrogen production yet challenging because of the rapid deactivation of electrocatalysts during the acidic oxygen evolution process. Here, we report that the single-site Pt-doped RuO₂ hollow nanospheres (SS Pt-RuO₂ HNSs) with interstitial C can serve as highly active and stable electrocatalysts for overall water splitting in 0.5 M H₂SO₄. The performance toward overall water splitting have surpassed most of the reported catalysts. Impressively, the SS Pt-RuO₂ HNSs exhibit promising stability in polymer electrolyte membrane electrolyzer at 100 mA cm^-2 during continuous operation for 100 hours. Detailed experiments reveal that the interstitial C can elongate Ru-O and Pt-O bonds, and the presence of SS Pt can readily vary the electronic properties of RuO₂ and improve the OER activity by reducing the energy barriers and enhancing the dissociation energy of ^*O species.

Electrocatalytic Water Splitting: From Harsh and Mild Conditions to Natural Seawater

Electrocatalytic water splitting is regarded as the most effective pathway to generate green energy-hydrogen-which is considered as one of the most promising clean energy solutions to the world's energy crisis and climate change mitigation. Although electrocatalytic water splitting has been proposed for decades, large-scale industrial hydrogen production is hindered by high electricity cost, capital investment, and electrolysis media. Harsh conditions (strong acid/alkaline) are widely used in electrocatalytic mechanism studies, and excellent catalytic activities and efficiencies have been achieved. However, the practical application of electrocatalytic water splitting in harsh conditions encounters several obstacles, such as corrosion issues, catalyst stability, and membrane technical difficulties. Thus, the research on water splitting in mild conditions (neutral/near neutral), even in natural seawater, has aroused increasing attention. However, the mechanism in mild conditions or natural seawater is not clear. Herein, different conditions in electrocatalytic water splitting are reviewed and the effects and proposed mechanisms in the three conditions are summarized. Then, a comparison of the reaction process and the effects of the ions in different electrolytes are presented. Finally, the challenges and opportunities associated with direct electrocatalytic natural seawater splitting and the perspective are presented to promote the progress of hydrogen production by water splitting.

Strategies for Electrochemically Sustainable H2 Production in Acid

Acidified water electrolysis with fast kinetics is widely regarded as a promising option for producing H₂ . The main challenge of this technique is the difficulty in realizing sustainable H₂ production (SHP) because of the poor stability of most electrode catalysts, especially on the anode side, under strongly acidic and highly polarized electrochemical environments, which leads to surface corrosion and performance degradation. Research efforts focused on tuning the atomic/nano structures of catalysts have been made to address this stability issue, with only limited effectiveness because of inevitable catalyst degradation. A systems approach considering reaction types and system configurations/operations may provide innovative viewpoints and strategies for SHP, although these aspects have been overlooked thus far. This review provides an overview of acidified water electrolysis for systematic investigations of these aspects to achieve SHP. First, the fundamental principles of SHP are discussed. Then, recent advances on design of stable electrode materials are examined, and several new strategies for SHP are proposed, including fabrication of symmetrical heterogeneous electrolysis system and fluid homogeneous electrolysis system, as well as decoupling/hybrid-governed sustainability. Finally, remaining challenges and corresponding opportunities are outlined to stimulate endeavors toward the development of advanced acidified water electrolysis techniques for SHP.

Recent Progress in Advanced Electrocatalyst Design for Acidic Oxygen Evolution Reaction

Proton exchange membrane (PEM) water electrolyzers hold great significance for renewable energy storage and conversion. The acidic oxygen evolution reaction (OER) is one of the main roadblocks that hinder the practical application of PEM water electrolyzers. Highly active, cost-effective, and durable electrocatalysts are indispensable for lowering the high kinetic barrier of OER to achieve boosted reaction kinetics. To date, a wide spectrum of advanced electrocatalysts has been designed and synthesized for enhanced acidic OER performance, though Ir and Ru based nanostructures still represent the state-of-the-art catalysts. In this Progress Report, recent research progress in advanced electrocatalysts for improved acidic OER performance is summarized. First, fundamental understanding about acidic OER including reaction mechanisms and atomic understanding to acidic OER for rational design of efficient electrocatalysts are discussed. Thereafter, an overview of the progress in the design and synthesis of advanced acidic OER electrocatalysts is provided in terms of catalyst category, i.e., metallic nanostructures (Ir and Ru based), precious metal oxides, nonprecious metal oxides, and carbon based nanomaterials. Finally, perspectives to the future development of acidic OER are provided from the aspects of reaction mechanism investigation and more efficient electrocatalyst design.

Anion Modulation of Pt-Group Metals and Electrocatalysis Applications

Pt-group metal (PGM) electrocatalysts with unique electronic structures and irreplaceable comprehensive properties play crucial roles in electrocatalysis. Anion engineering can create a series of PGM compounds (such as RuP₂ , IrP₂ , PtP₂ , RuB₂ , Ru₂ B₃ , RuS₂ , etc.) that provide a promising prospect for improving the electrocatalytic performance and use of Pt-group noble metals. This review seeks the electrochemical activity origin of anion-modulated PGM compounds, and systematically analyzes and summarizes their synthetic strategies and energy-relevant applications in electrocatalysis. Orientation towards the sustainable development of nonfossil resources has stimulated a blossoming interest in the design of advanced electrocatalysts for clean energy conversion. The anion-modulated strategy for Pt-group metals (PGMs) by means of anion engineering possesses high flexibility to regulate the electronic structure, providing a promising prospect for constructing electrocatalysts with superior activity and stability to satisfy a future green electrochemical energy conversion system. Based on the previous work of our group and others, this review summarizes the up-to-date progress on anion-modulated PGM compounds (such as RuP₂ , IrP₂ , PtP₂ , RuB₂ , Ru₂ B₃ , RuS₂ , etc.) in energy-related electrocatalysis from the origin of their activity and synthetic strategies to electrochemical applications including hydrogen evolution reaction (HER), oxygen evolution reaction (OER), oxygen reduction reaction (ORR), hydrogen oxidation reaction (HOR), N₂ reduction reaction (NRR), and CO₂ reduction reaction (CO₂ RR). At the end, the key problems, countermeasures and future development orientations of anion-modulated PGM compounds toward electrocatalytic applications are proposed.

Comprehensive Understandings into Complete Reconstruction of Precatalysts: Synthesis, Applications, and Characterizations

Reconstruction induced by external environment (such as applied voltage bias and test electrolytes) changes catalyst component and catalytic behaviors. Investigations of complete reconstruction in energy conversion recently receive intensive attention, which promote the targeted design of top-performance materials with maximum component utilization and good stability. However, the advantages of complete reconstruction, its design strategies, and extensive applications have not achieved the profound understandings and summaries it deserves. Here, this review systematically summarizes several important advances in complete reconstruction for the first time, which includes 1) fundamental understandings of complete reconstruction, the characteristics and advantages of completely reconstructed catalysts, and their design principles, 2) types of reconstruction-involved precatalysts for oxygen evolution reaction catalysis in wide pH solution, and origins of limited reconstruction degree as well as design strategies/principles toward complete reconstruction, 3) complete reconstruction for novel material synthesis and other electrocatalysis fields, and 4) advanced in situ/operando or multiangle/level characterization techniques to capture the dynamic reconstruction processes and real catalytic contributors. Finally, the existing major challenges and unexplored/unsolved issues on studying the reconstruction chemistry are summarized, and an outlook for the further development of complete reconstruction is briefly proposed. This review will arouse the attention on complete reconstruction materials and their applications in diverse fields.

Recent Development of Oxygen Evolution Electrocatalysts in Acidic Environment

The proton exchange membrane (PEM) water electrolysis is one of the most promising hydrogen production techniques. The oxygen evolution reaction (OER) occurring at the anode dominates the overall efficiency. Developing active and robust electrocatalysts for OER in acid is a longstanding challenge for PEM water electrolyzers. Most catalysts show unsatisfied stability under strong acidic and oxidative conditions. Such a stability challenge also leads to difficulties for a better understanding of mechanisms. This review aims to provide the current progress on understanding of OER mechanisms in acid, analyze the promising strategies to enhance both activity and stability, and summarize the state-of-the-art catalysts for OER in acid. First, the prevailing OER mechanisms are reviewed to establish the physicochemical structure-activity relationships for guiding the design of highly efficient OER electrocatalysts in acid with stable performance. The reported approaches to improve the activity, from macroview to microview, are then discussed. To analyze the problem of instability, the key factors affecting catalyst stability are summarized and the surface reconstruction is discussed. Various noble-metal-based OER catalysts and the current progress of non-noble-metal-based catalysts are reviewed. Finally, the challenges and perspectives for the development of active and robust OER catalysts in acid are discussed.

Porous Structure Engineering of Iridium Oxide Nanoclusters on Atomic Scale for Efficient pH-Universal Overall Water Splitting

Water electrolysis, which is a promising high-purity H₂ production method, lacks pH-universality; moreover, highly efficient electrocatalysts that accelerate the sluggish anodic oxygen evolution reaction (OER) are scarce. Geometric structure engineering and electronic structure modulation can be efficiently used to improve catalyst activity. Herein, a facile Ar plasma treatment method to fabricate a composite of uniformly dispersed iridium-copper oxide nanoclusters supported on defective graphene (DG) to form IrCuO_x @DG, is described. Acid leaching can be used to remove Cu atoms and generate porous IrO_x nanoclusters supported on DG (P-IrO_x @DG), which can serve as efficient and robust pH-universal OER electrocatalysts. Moreover, when paired with commercial 20 wt% Pt/C, P-IrO_x @DG can deliver current densities of 350.0, 317.6, and 47.1 mA cm^-2 at a cell voltage of 2.2 V for overall water splitting in 0.5 m sulfuric acid, 1.0 m potassium hydroxide, and 1.0 m phosphate buffer solution, respectively, outperforming commercial IrO₂ and nonporous IrO_x nanoclusters supported on DG (O-IrO_x @DG). Probing experiment, X-ray absorption spectroscopy, and theoretical calculation results demonstrate that Cu removal can successfully create P-IrO_x nanoclusters and introduce unsaturated Ir atoms. The optimum binding energies of oxygenated intermediate species on unsaturated Ir sites and ultrafine IrO_x nanoclusters contribute to the high intrinsic OER catalytic activity of P-IrO_x @DG.

Exclusive Strain Effect Boosts Overall Water Splitting in PdCu/Ir Core/Shell Nanocrystals

Core/shell nanocatalysts are a class of promising materials, which achieve the enhanced catalytic activities through the synergy between ligand effect and strain effect. However, it has been challenging to disentangle the contributions from the two effects, which hinders the rational design of superior core/shell nanocatalysts. Herein, we report precise synthesis of PdCu/Ir core/shell nanocrystals, which can significantly boost oxygen evolution reaction (OER) via the exclusive strain effect. The heteroepitaxial coating of four Ir atomic layers onto PdCu nanoparticle gives a relatively thick Ir shell eliminating the ligand effect, but creates a compressive strain of ca. 3.60%. The strained PdCu/Ir catalysts can deliver a low OER overpotential and a high mass activity. Density functional theory (DFT) calculations reveal that the compressive strain in Ir shell downshifts the d-band center and weakens the binding of the intermediates, causing the enhanced OER activity. The compressive strain also boosts hydrogen evolution reaction (HER) activity and the strained nanocrystals can be served as excellent catalysts for both anode and cathode in overall water-splitting electrocatalysis.

Selenic Acid Etching Assisted Vacancy Engineering for Designing Highly Active Electrocatalysts toward the Oxygen Evolution Reaction

Oxygen evolution electrocatalysts are central to overall water splitting, and they should meet the requirements of low cost, high activity, high conductivity, and stable performance. Herein, a general, selenic-acid-assisted etching strategy is designed from a metal-organic framework as a precursor to realize carbon-coated 3d metal selenides M_m Se_n (Co_0.85 Se_{1- x} , NiSe_{2- x} , FeSe_{2- x} ) with rich Se vacancies as high-performance precious metal-free oxygen evolution reaction (OER) electrocatalysts. Specifically, the as-prepared Co_0.85 Se_{1- x} @C nanocages deliver an overpotential of only 231 mV at a current density of 10 mA cm^-2 for the OER and the corresponding full water-splitting electrolyzer requires only a cell voltage of 1.49 V at 10 mA cm^-2 in alkaline media. Density functional theory calculation reveals the important role of abundant Se vacancies for improving the catalytic activity through improving the conductivity and reducing reaction barriers for the formation of intermediates. Although phase change after long-term operation is observed with the formation of metal hydroxides, catalytic activity is not obviously affected, which strengthens the important role of the carbon network in the operating stability. This study provides a new opportunity to realize high-performance OER electrocatalysts by a general strategy on selenic acid etching assisted vacancy engineering.

Ir-based bifunctional electrocatalysts for overall water splitting

The recent progress on Ir-based bifunctional electrocatalysts in enhancing the overall water splitting performance is reviewed mainly from the aspects of optimizing the composition and morphology.

Accurately Regulating the Electronic Structure of Nix Sey @NC Core-Shell Nanohybrids through Controllable Selenization of a Ni-MOF for pH-Universal Hydrogen Evolution Reaction

N-doped carbon-encapsulated transition metal selenides (TMSs) have garnered increasing attention as promising electrocatalysts for hydrogen evolution reaction (HER). Accurately regulating the electronic structure of these nanohybrids to reveal the underlying mechanism for enhanced HER performances is still challenging and thus requires deep excavation. Herein, a series of pomegranate-like Ni_x Se_y @NC core-shell nanohybrids (including Ni_0.85 Se @ NC, NiSe₂ @NC, and NiSe@NC) through controllable selenization of a Ni-MOF precursor is reported. The component of the nanohybrids can be fine-tuned by tailoring the selenization temperature and feed ratio, through which the electronic structure can be synchronously regulated. Among these nanohybrids, the Ni_0.85 Se @ NC exhibits the optimum pH-universal HER performance with overpotentials of 131, 135, and 183 mV in 0.5 m H₂ SO₄ , 1.0 m KOH, and 1.0 m PBS, respectively, at 10 mA cm^-2 , which are attributed to the increased partial density of state at the Fermi level and effective van der Waals interactions between Ni_0.85 Se and NC matrix explained by density functional theory calculations.

Active Site Engineering in Porous Electrocatalysts

Electrocatalysis is at the center of many sustainable energy conversion technologies that are being developed to reduce the dependence on fossil fuels. The past decade has witnessed significant progresses in the exploitation of advanced electrocatalysts for diverse electrochemical reactions involved in electrolyzers and fuel cells, such as the hydrogen evolution reaction (HER), the oxygen reduction reaction (ORR), the CO₂ reduction reaction (CO₂ RR), the nitrogen reduction reaction (NRR), and the oxygen evolution reaction (OER). Herein, the recent research advances made in porous electrocatalysts for these five important reactions are reviewed. In the discussions, an attempt is made to highlight the advantages of porous electrocatalysts in multiobjective optimization of surface active sites including not only their density and accessibility but also their intrinsic activity. First, the current knowledge about electrocatalytic active sites is briefly summarized. Then, the electrocatalytic mechanisms of the five above-mentioned reactions (HER, ORR, CO₂ RR, NRR, and OER), the current challenges faced by these reactions, and the recent efforts to meet these challenges using porous electrocatalysts are examined. Finally, the future research directions on porous electrocatalysts including synthetic strategies leading to these materials, insights into their active sites, and the standardized tests and the performance requirements involved are discussed.

Nitrogen-Incorporated Cobalt Sulfide/Graphene Hybrid Catalysts for Overall Water Splitting

Water electrolysis is an advanced and sustainable energy conversion technology used to generate H₂ . However, the low efficiency of the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) hampers the overall water-splitting catalytic performance. Here, a hybrid catalyst was constructed from N-doped CoS₂ nanoparticles on N,S-co-doped graphene nanosheets (N-CoS₂ /G) using a facile method, and the catalyst exhibited excellent bifunctional activity. Introduction of N atoms not only promoted the adsorption of reaction intermediates, but also bridged the CoS₂ nanoparticles and graphene to improve electron transfer. Moreover, using thiourea as both N- and S-source ensured synthesis of much smaller-sized nanoparticles with more surface active sites. Surprisingly, the N-CoS₂ /G exhibited superior catalytic activity with a low overpotential of 260 mV for the OER and 109 mV for the HER at a current density of 10 mA cm^-2 . The assembled N-CoS₂ /G : N-CoS₂ /G electrolyzer substantially expedited overall water splitting with a voltage requirement of 1.58 V to reach 10 mA cm^-2 , which is superior to most reported Co-based bifunctional catalysts and other non-precious-metal catalysts. This work provides a new strategy towards advanced bifunctional catalysts for water electrolysis.

Coordination engineering of iridium nanocluster bifunctional electrocatalyst for highly efficient and pH-universal overall water splitting

Water electrolysis offers a promising energy conversion and storage technology for mitigating the global energy and environmental crisis, but there still lack highly efficient and pH-universal electrocatalysts to boost the sluggish kinetics for both cathodic hydrogen evolution reaction (HER) and anodic oxygen evolution reaction (OER). Herein, we report uniformly dispersed iridium nanoclusters embedded on nitrogen and sulfur co-doped graphene as an efficient and robust electrocatalyst for both HER and OER at all pH conditions, reaching a current density of 10 mA cm-2 with only 300, 190 and 220 mV overpotential for overall water splitting in neutral, acidic and alkaline electrolyte, respectively. Based on probing experiments, operando X-ray absorption spectroscopy and theoretical calculations, we attribute the high catalytic activities to the optimum bindings to hydrogen (for HER) and oxygenated intermediate species (for OER) derived from the tunable and favorable electronic state of the iridium sites coordinated with both nitrogen and sulfur.

Atomically Dispersed Iridium on Indium Tin Oxide Efficiently Catalyzes Water Oxidation

Heterogeneous catalysts in the form of atomically dispersed metals on a support provide the most efficient utilization of the active component, which is especially important for scarce and expensive late transition metals. These catalysts also enable unique opportunities to understand reaction pathways through detailed spectroscopic and computational studies. Here, we demonstrate that atomically dispersed iridium sites on indium tin oxide prepared via surface organometallic chemistry display exemplary catalytic activity in one of the most challenging electrochemical processes, the oxygen evolution reaction (OER). In situ X-ray absorption studies revealed the formation of IrV=O intermediate under OER conditions with an Ir-O distance of 1.83 Å. Modeling of the reaction mechanism indicates that IrV=O is likely a catalyst resting state, which is subsequently oxidized to IrVI enabling fast water nucleophilic attack and oxygen evolution. We anticipate that the applied strategy can be instrumental in preparing and studying a broad range of atomically dispersed transition metal catalysts on conductive oxides for (photo)electrochemical applications.

Three-Dimensional Transition Metal Phosphide Heteronanorods for Efficient Overall Water Splitting

The development of low-cost electrocatalysts with excellent activity and durability for both the oxygen evolution reaction (OER) and the hydrogen evolution reaction (HER) poses a huge challenge in water splitting. In this study, a simple and scalable strategy is proposed to fabricate 3 D heteronanorods on nickel foam, in which nickel molybdenum phosphide nanorods are covered with cobalt iron phosphide (P-NM-CF HNRs). As a result of the rational design, the P-NM-CF HNRs have a large surface area, tightly connected interfaces, optimized electronic structures, and synergy between the metal atoms. Accordingly, the P-NM-CF HNRs exhibit a remarkably high catalytic activity for the OER under alkaline conditions and wide-pH HER. For overall water splitting, the catalyst only requires a voltage of 1.53 V to reach a current density of 10 mA cm^-2 in 1 m KOH with prominent stability, and the activity is not degraded after stability testing for 36 h. This new strategy can inspire the design of durable nonprecious-metal catalysts for large-scale industrial water splitting.