An Organic–Inorganic Hybrid Exhibiting Electrical Conduction and Single‐Ion Magnetism

Single-Ion Magnetism of the [DyIII(hfac)4]- Anions in the Crystalline Semiconductor {TSeT1.5}●+[DyIII(hfac)4]- Containing Weakly Dimerized Stacks of Tetraselenatetracene

The oxidation of tetraselenatetracene (TSeT) by tetracyanoquinodimethane in the presence of dysprosium(III) tris(hexafluoroacetylacetonate), DyIII(hfac)3, produces black crystals of {TSeT1.5}●+[DyIII(hfac)4]- (1) salt, which combines conducting and magnetic sublattices. It contains one-dimensional stacks composed of partially oxidized TSeT molecules (formal averaged charge is +2/3). Dimers and monomers can be outlined within these stacks with charge and spin density redistribution. The spin triplet state of the dimers is populated above 128 K with an estimated singlet-triplet energy gap of 542 K, whereas spins localized on the monomers show paramagnetic behavior. A semiconducting behavior is observed for 1 with the activation energy of 91 meV (measured by the four-probe technique for an oriented single crystal). The DyIII ions coordinate four hfac- anions in [DyIII(hfac)4]-, providing D2d symmetry. Slow magnetic relaxation is observed for DyIII under an applied static magnetic field of 1000 Oe, and 1 is a single-ion magnet (SIM) with spin reversal barrier Ueff = 40.2 K and magnetic hysteresis at 2 K. Contributions from DyIII and TSeT●+ paramagnetic species are seen in EPR. The DyIII ion rarely manifests EPR signals, but such signal is observed in 1. It appears due to narrowing below 30 K and has g4 = 6.1871 and g5 = 2.1778 at 5.4 K.

Step-by-Step Electrocrystallization Processes to Make Multiblock Magnetic Molecular Heterostructures

Assembling conductive or magnetic heterostructures by bulk inorganic materials is important for making functional electronic or spintronic devices, such as semiconductive p-doped and n-doped silicon for P-N junction diodes, alternating ferromagnetic and nonmagnetic conductive layers used in giant magnetoresistance (GMR). Nonetheless, there have been few demonstrations of conductive or magnetic heterostructures made by discrete molecules. It is of fundamental interest to prepare and investigate heterostructures based on molecular conductors or molecular magnets, such as single-molecule magnets (SMMs). Herein, we demonstrate the fabrication of a series of molecular heterostructures composed of (TTF)₂M(pdms)₂ (TTF = tetrathiafulvalene, M = Co(II), Zn(II), Ni(II), H₂pdms = 1,2-bis(methanesulfonamido)benzene) multiple building blocks through a well-controlled step-by-step electrocrystallization growth process, where the Co(pdms)₂, Ni(pdms)₂, and Zn(pdms)₂ anionic complex is a SMM, paramagnetic, and diamagnetic molecule, respectively. Magnetic and SMM properties of the heterostructures were characterized and compared to the parentage (TTF)₂Co(pdms)₂ complex. This study presents the first methodology for creating molecule-based magnetic heterostructural systems by electrocrystallization.

Field-induced slow magnetic relaxation behaviours in binuclear cobalt(II) metallocycle and exchange-coupled cluster

Precise control of structures and magnetic properties of a molecular material constitutes an important challenge to realize the tailor-made magnetic function. Herein, we reported that the ligand-directed coordination self-assembly of...

4f-π Molecular Hybrid Exhibiting Rich Conductive Phases and Slow Relaxation of Magnetization

Cooperation between single-molecule magnets and electrical conductivity holds promise for preparing high-density magnetic devices; however, there are only a few reports so far. Here we report a 4f-π-based molecular hybrid, k-(ET)₅Dy(NCS)₇(KCl)_0.5 (1) (ET = bis(ethylenedithio)tetrathiafulvalene, NCS^- = thiocyanate), which undergoes slow relaxation of the magnetization and electrical conductivity. Unlike common ET-based conductive salts, K⁺ ions were intercalated into ET layers and coordinated with ET radicals. We found that the ET charges were sensitive to temperature, resulting in rich conductive phases at 75-300 K. In particular, the upturn in conductivity with a clear hysteresis loop was explained by the formation of partially oxidized states with charges close to 0.5+, which accounts for a metallic state. From the results of electronic structure calculations, the hole concentration increased to 125 K, which is consistent with a partially oxidized state upon cooling. The weak antiferromagnetic interactions accompanied by a dual magnetic relaxation process below 4 K are closely associated with the weak 4f-π interactions.

Emergence of Metallic Conduction and Cobalt(II)-Based Single-Molecule Magnetism in the Same Temperature Range

Single-molecule magnets exhibit magnetic bistabililties at the molecular level, making them promising for molecule-based spintronics due to high magnetic densities. The incorporation of SMM behavior and electrical conductivity in one compound is rare because these two physical properties often do not operate in the same temperature range, which further hinders their use in practical applications. Here we present an organic-inorganic molecular hybrid, β″-(BEDO-TTF)₃[Co(pdms)₂]·(MeCN)(H₂O)₂ (BO3) (BEDO-TTF = bis(ethylenedioxy)tetrathiafulvalene and H₂pdms = 1,2-bis(methanesulfonamido)benzene), which manifests both metallic conduction (electrical conductivity up to 1000 S cm^-1 at 12 K under 2.0 gigapascal pressure) and SMM behavior in the temperature range 12-26 K for the first time.

Iron(II), Cobalt(II), and Nickel(II) Complexes of Bis(sulfonamido)benzenes: Redox Properties, Large Zero-Field Splittings, and Single-Ion Magnets

Metal complexes of 1,2-diamidobenzenes have been long studied because of their intriguing redox properties and electronic structures. We present here a series of such complexes with 1,2-bis(sulfonamido)benzene ligands to probe the utility of these ligands for generating a large zero-field splitting (ZFS, D) in metal complexes that possibly act as single-ion magnets. To this end, we have synthesized a series of homoleptic ate complexes of the form (X)_n[M{bis(sulfonamido)benzene}₂] (n equals 4 minus the oxidation state of the metal), where M (Fe/Co/Ni), X [K⁺/(K-18-c-6)⁺/(HNEt₃)⁺, with 18-c-6 = 18-crown ether 6], and the substituents (methyl and tolyl) on the ligand [bmsab = 1,2-bis(methanesulfonamido)benzene; btsab = 1,2-bis(toluenesulfonamido)benzene] were varied to analyze their effect on the ZFS, possible single-ion-magnet properties, and redox behavior of these metal complexes. A combination of X-ray crystallography, (spectro)electrochemistry, superconducting quantum interference device magnetometry, high-frequency electron paramagnetic resonance spectroscopy, and Mössbauer spectroscopy was used to investigate the electronic/geometric structures of these complexes and the aforementioned properties. These investigations show that the cobalt(II) complexes display very high negative D values in the range of -100 to -130 cm^-1, and the nickel(II) complexes display very high positive D values of 76 and 58 cm^-1. In addition, the cobalt(II) complexes shows barriers of 200-260 cm^-1 and slow relaxation of the magnetization in the absence of an external magnetic field, underscoring the robustness of this class of complexes. The iron(II) complex exhibits a D value of -3.29 cm^-1 and can be chemically oxidized to an iron(III) complex that has D = -1.96 cm^-1. These findings clearly show that bis(sulfonamido)benzenes are ideally suited to stabilize ate complexes, to generate very high ZFSs at the metal centers with single-ion-magnet properties, and to induce exclusive oxidation at the metal center (for iron) despite the presence of ligands that are potentially noninnocent. Our results therefore substantially enhance the scope for this class of redox-active ligands.

Simultaneous manifestation of metallic conductivity and single-molecule magnetism in a layered molecule-based compound

Single-molecule magnets (SMMs) show superparamagnetic behaviour below blocking temperature at the molecular scale, so they exhibit large magnetic density compared to the conventional magnets. Combining SMMs and molecular conductors in one compound will bring about new physical phenomena, however, the synergetic effects between them still remain unexplored. Here we present a layered molecule-based compound, β′′-(BEDO-TTF)₄ [Co(pdms)₂]·3H₂O (BO4), (BEDO-TTF (BO) and H₂pdms are bis(ethylenedioxy)tetrathiafulvalene and 1,2-bis(methanesulfonamido)benzene, respectively), which was synthesized by using an electrochemical approach and studied by using crystal X-ray diffraction. This compound simultaneously exhibited metallic conductivity and SMM behaviour up to 11 K for the first time. The highest electrical conductivity was 400–650 S cm⁻¹ at 6.5 K, which is the highest among those reported so far for conducting SMM materials. Furthermore, antiferromagnetic ordering occurred below 6.5 K, along with a decrease in conductivity, and the angle-independent negative magnetoresistance suggested an effective electron correlation between the conducting BO and Co(pdms)₂ SMM layers (d–π interactions). The strong magnetic anisotropy and two-dimensional conducting plane play key roles in the low-temperature antiferromagnetic semiconducting state. BO4 is the first compound exhibiting antiferromagnetic ordering among SMMs mediated by π-electrons, demonstrating the synergetic effects between SMMs and molecular conductors.

A metallic single-molecule magnet was synthesised demonstrating simultaneous metallic conduction and excellent SMM properties at the same temperature range for the first time, with potential applications in molecule-based quantum spintronics.