Migratory Hydrogenation of Terminal Alkynes by Base/Cobalt Relay Catalysis

Synthesis and migrastatic activity of cytochalasin analogues lacking a macrocyclic moiety

Cytochalasans are known as inhibitors of actin polymerization and for their cytotoxic and migrastatic activity. In this study, we synthesized a series of cytochalasin derivatives that lack a macrocyclic moiety, a structural element traditionally considered essential for their biological activity. We focused on substituting the macrocycle with simple aryl-containing sidechains, and we have also synthesized compounds with different substitution patterns on the cytochalasin core. The cytochalasin analogues were screened for their migrastatic and cytotoxic activity. Compound 24 which shares the substitution pattern with natural cytochalasins B and D exhibited not only significant in vitro migrastatic activity towards BLM cells but also demonstrated inhibition of actin polymerization, with no cytotoxic effect observed at 50 μM concentration. Our results demonstrate that even compounds lacking the macrocyclic moiety can exhibit biological activities, albeit less pronounced than those of natural cytochalasins. However, our findings emphasize the pivotal role of substituting the core structure in switching between migrastatic activity and cytotoxicity. These findings hold significant promise for further development of easily accessible cytochalasan analogues as novel migrastatic agents.

B(C6 F5 )3 -Catalyzed [2+3]-Cyclative o,m-diC-H Functionalization of Phenols

Metal-free catalytic C-H functionalization is highly desired for the construction of C-C bonds. We herein report a highly chemoselective consecutive C-H [2+3]-cyclative functionalization for the simultaneous formation of two C-C bonds with construction of polycyclic phenols catalyzed by commercially available and low-cost B(C6 F5 )3 . This catalytic system tolerates a wide range of substrate scope, providing a series of 2,6,7,8-tetrahydroacenaphthylen-3-ol-type polycyclic compounds efficiently. Several derivatizations of the catalytic products have also been conducted to show the potential application of this method in synthesis of polycyclic compounds.

H2O as the Hydrogen Donor: Stereo-Selective Synthesis of E- and Z-Alkenes by Palladium-Catalyzed Semihydrogenation of Alkynes

It is very desirable to develop a facile controllable method for selective semihydrogenation of alkynes to alkenes with a cheap and safe hydrogen donor but remains a big challenge. H₂O is one of the best choices of the transfer hydrogenation agent of the world, and the development of methods for synthesizing E- and Z-alkenes using H₂O as the hydrogen source is worthwhile. In this article, a palladium-catalyzed synthesis of E- and Z-alkenes from alkynes using H₂O as the hydrogenation agent was reported. The use of di-tert-butylphosphinous chloride (t-Bu₂PCl) and triethanolamine/sodium acetate (TEOA/NaOAc) was essential for the stereo-selective semihydrogenation of alkynes. The general applicability of this procedure was highlighted by the synthesis of more than 48 alkenes, with good yields and high stereoselectivities.

Palladium-catalyzed transfer hydrogenation of terminal alkynes using ethanol as the hydrogen donor

A ligand-promoted, palladium-catalyzed transfer hydrogenation of terminal alkynes using ethanol as the hydrogen donor is developed. The chemical selectivity control is achieved based on ligand regulation. The use of triethanolamine and tetrahydrofuran at 80 °C under N2 is found to be critical for the transfer hydrogenation of terminal alkynes. The general applicability of this procedure is highlighted by the synthesis of 27 terminal alkenes in moderate to good yields.

Reactions of an Osmium-Hexahydride Complex with 2-Butyne and 3-Hexyne and Their Performance in the Migratory Hydroboration of Aliphatic Internal Alkynes

Reactions of the hexahydride OsH₆(PⁱPr₃)₂ (1) with 2-butyne and 3-hexyne and the behavior of the resulting species toward pinacolborane (pinBH) have been investigated in the search for new hydroboration processes. Complex 1 reacts with 2-butyne to give 1-butene and the osmacyclopropene OsH₂(η²-C₂Me₂)(PⁱPr₃)₂ (2). In toluene, at 80 °C, the coordinated hydrocarbon isomerizes into a η⁴-butenediyl form to afford OsH₂(η⁴-CH₂CHCHCH₂)(PⁱPr₃)₂ (3). Isotopic labeling experiments indicate that the isomerization involves Me-to-C_Os hydrogen 1,2-shifts, which take place through the metal. The reaction of 1 with 3-hexyne gives 1-hexene and OsH₂(η²-C₂Et₂)(PⁱPr₃)₂ (4). Similarly to 2, complex 4 evolves to η⁴-butenediyl derivatives OsH₂(η⁴-CH₂CHCHCHEt)(PⁱPr₃)₂ (5) and OsH₂(η⁴-MeCHCHCHCHMe)(PⁱPr₃)₂ (6). In the presence of pinBH, complex 2 generates 2-pinacolboryl-1-butene and OsH{κ²-H,H-(H₂Bpin)}(η²-HBpin)(PⁱPr₃)₂ (7). According to the formation of the borylated olefin, complex 2 is a catalyst precursor for the migratory hydroboration of 2-butyne and 3-hexyne to 2-pinacolboryl-1-butene and 4-pinacolboryl-1-hexene. During the hydroboration, complex 7 is the main osmium species. The hexahydride 1 also acts as a catalyst precursor, but it requires an induction period that causes the loss of 2 equiv of alkyne per equiv of osmium.

Organo/Silver Dual Catalytic (3 + 2)/Conia-Ene Type Cyclization: Asymmetric Synthesis of Indane-Fused Spirocyclopenteneoxindoles

Developing efficient strategies to synthesize spirocyclopenteneoxindoles is an attractive target due to their potential biological activity. This work described the thiourea/silver dual catalytic (3 + 2)/Conia-ene type reaction of 2-(2-oxoindolin-3-yl)malononitrile with ortho-ethynyl substituted nitrostyrene. The reaction features mild conditions and good atom- and step-economy. Three new C-C bonds were formed within one synthetic step, providing the indane-fused spirocyclopenteneoxindoles in good yields, with excellent chemo-, regio-, and stereoselectivity.

Controlled Selectivity through Reversible Inhibition of the Catalyst: Stereodivergent Semihydrogenation of Alkynes

Catalytic semihydrogenation of internal alkynes using H₂ is an attractive atom-economical route to various alkenes, and its stereocontrol has received widespread attention, both in homogeneous and heterogeneous catalyses. Herein, a novel strategy is introduced, whereby a poisoning catalytic thiol is employed as a reversible inhibitor of a ruthenium catalyst, resulting in a controllable H₂-based semihydrogenation of internal alkynes. Both (E)- and (Z)-alkenes were obtained efficiently and highly selectively, under very mild conditions, using a single homogeneous acridine-based ruthenium pincer catalyst. Mechanistic studies indicate that the (Z)-alkene is the reaction intermediate leading to the (E)-alkene and that the addition of a catalytic amount of bidentate thiol impedes the Z/E isomerization step by forming stable ruthenium thiol(ate) complexes, while still allowing the main hydrogenation reaction to proceed. Thus, the absence or presence of catalytic thiol controls the stereoselectivity of this alkyne semihydrogenation, affording either the (E)-isomer as the final product or halting the reaction at the (Z)-intermediate. The developed system, which is also applied to the controllable isomerization of a terminal alkene, demonstrates how metal catalysis with switchable selectivity can be achieved by reversible inhibition of the catalyst with a simple auxiliary additive.

Cobalt-N-Heterocyclic Carbene Complexes in Catalysis

Cobalt-NHC complexes have emerged as an attractive class of 3d transition metal catalysts for a broad range of chemical processes, including cross-coupling, hydrogenation, hydrofunctionalization and cycloaddition reactions. Herein, we present a comprehensive review of catalytic methods utilizing cobalt-NHC complexes with a focus on catalyst structure, the role of the NHC ligand, properties of the catalytic system, mechanism and synthetic utility. The survey clearly suggests that the recent emergence of well-defined cobalt-NHC catalysts may have a tremendous utility in the design and application of catalytic reactions using more abundant 3d transition metals.

E-Selective Manganese-Catalyzed Semihydrogenation of Alkynes with H2 Directly Employed or In Situ-Generated

Selective semihydrogenation of alkynes with the Mn(I) alkyl catalyst fac-[Mn(dippe)(CO)₃(CH₂CH₂CH₃)] (dippe = 1,2-bis(di-iso-propylphosphino)ethane) as a precatalyst is described. The required hydrogen gas is either directly employed or in situ-generated upon alcoholysis of KBH₄ with methanol. A series of aryl-aryl, aryl-alkyl, alkyl-alkyl, and terminal alkynes was readily hydrogenated to yield E-alkenes in good to excellent isolated yields. The reaction proceeds at 60 °C for directly employed hydrogen or at 60-90 °C with in situ-generated hydrogen and catalyst loadings of 0.5-2 mol %. The implemented protocol tolerates a variety of electron-donating and electron-withdrawing functional groups, including halides, phenols, nitriles, unprotected amines, and heterocycles. The reaction can be upscaled to the gram scale. Mechanistic investigations, including deuterium-labeling studies and density functional theory (DFT) calculations, were undertaken to provide a reasonable reaction mechanism, showing that initially formed Z-isomer undergoes fast isomerization to afford the thermodynamically more stable E-isomer.

Manganese-catalyzed transfer semihydrogenation of internal alkynes to E-alkenes with iPrOH as hydrogen source

The Mn-catalyzed transfer semihydrogenation of internal alkynes to E-alkenes is reported herein, along with Mn-catalyzed hydration of α-keto alkynes. Mechanistic studies displayed an asymmetrical Mn-hydride species performing the catalytic turnover.

Cobalt-Catalyzed Dearomatization of Indoles via Transfer Hydrogenation To Afford Polycyclic Indolines

A cobalt-catalyzed dearomatization of indoles via transfer hydrogenation with HBpin and H₂O has been developed. This reaction offered a straightforward platform to access hexahydropyrido[1,2-a]indoles in high regio- and chemoselectivity. A preliminary reaction mechanism was proposed on the basis of deuterium-labeling experiments, and a cobalt hydride species was involved in the reaction.

Transition metal-catalyzed alkene isomerization as an enabling technology in tandem, sequential and domino processes

One-pot reactions based on catalytic isomerization of alkenes not only offer the inherent advantages of atom-, step- and redox-economy but also enable the preparation of value-added products that would be difficult to access by conventional methods.

Z-Selective phosphine promoted 1,4-reduction of ynoates and propynoic amides in the presence of water

Phosphine-mediated reductions of substituted propynoic esters and amides in the presence of water yield the partially reduced α,β-unsaturated esters and amides with high Z-selectivity. The competitive in situ Z to E-isomerization of the product in some cases lowers the Z to E ratios of the isolated α,β-unsaturated carbonyl products. Reaction time and the amounts of phosphine and water in the reaction mixture are the key experimental factors which control the selectivity by preventing or reducing the rates of Z- to E-product isomerization. Close reaction monitoring enables isolation of the Z-alkenes with high selectivities. The computational results suggest that the reactions could be highly Z-selective owing to the stereoselective formation of the E-P-hydroxyphosphorane intermediate.