Excimer and Exciplex Formation in Gold(I) Complexes Preconditioned by Aurophilic Interactions

Two-Coordinate Dinuclear Donor-Gold(I)-Acceptor Complexes Exhibiting Multiple Excitation Wavelength Dependent Phosphorescence

Two-coordinate Au(I) complexes with a donor-metal-acceptor (D-M-A) structure have shown rich luminescent properties. However, charge-neutral dinuclear donor-metal-acceptor type Au(I) complexes featuring aurophilic interactions have been seldom explored. Herein, we describe the structures and photoluminescence properties of two dinuclear Au(I) complexes, namely DiAu-Ph and DiAu-Me. Single crystal X-ray structural analysis of DiAu-Ph reveals a short intramolecular Au-Au distance of 3.224 Å. In dilute solution and doped films, excitation wavelength dependent multiple phosphorescence phenomena were observed for these dinuclear complexes. Theoretical calculations reveal that the aurophilic interaction causes increased contribution of the Au d orbital to the highest occupied molecular orbitals. Thus, the gap between singlet and triplet excited states (ΔEST) is enlarged, which disables the thermally activated delayed fluorescence (TADF). Moreover, the large energy separation (0.45-0.52 eV) and the different orbital configurations between the various excited states result in an inefficient internal conversion, accounting for their multiple phosphorescence properties.

Au⋅⋅⋅H-X (X=N or C) Intramolecular Interactions in Gold (I)-NHC Carbene Complexes with Potential Anticancer Properties: A Quantum Mechanical Study with Two Basis Sets

Three cationic Gold(I)-NHC complexes with potential anticancer properties were studied using DFT with B3LYP functional in combination with two basis sets, LanL2DZ and SDD. Obtained equilibrium geometries and computed IR spectra were found in excellent agreement with previously reported x-ray structures and experimental IR spectral data. NBO population analysis showed gold(I) has a charge deficiency of 0.26-0.30 e. All three complex cations are polar, with dipole moment values ranging from 6.8 to 7.4 Debye. Regardless of some structural differences in their co-ligands, all three complex cations have remarkably similar HOMO-LUMO energy gaps, with values ranging from 5.2 to 5.4 eV, confirming they are chemically stable and that they share an almost identical stability. Long-range intramolecular interactions Au ⋅⋅⋅H-X (X=N or C) in all three cationic complexes were identified. Both basis sets employed in this study were found equally effective in producing reliable results.

Effect of sodium acetate additive on gold leaching with cyanide solution: Laboratory and semi-pilot leaching tests

Heap leaching with a cyanide solution is used for processing low-grade ores; however, owing to the chemical, mineralogical, and physical characteristics of ores and their particle size distribution, extraction efficiencies are often low. This study investigated the effects of sodium acetate addition on gold extraction from Akshoky deposit ores under laboratory and semi-pilot laboratory test conditions. The gold-bearing ore used in this study had average gold and silver contents of 1.32 and 3.27 g/t, respectively. The chemical composition of the ore was as follows (wt%): copper: 0.0185, nickel: 0.0090, cobalt: 0.0025, zinc: 0.0470, lead: 0.0095, total iron: 4.10, calcium oxide: 3.08, magnesium oxide: 1.10, sodium oxide: 1.40, potassium oxide: 0.82, silicon oxide: 64.22, aluminum oxide: 13.37, arsenic: 0.023, antimony: 0.0024, total sulfur: 0.24, sulfate sulfur: 0.040, and sulfide sulfur: 0.20. Gold in the ore occurs in different forms: free/native form grains (82 %), covered with films (3.28 %), associated with sulfides (6.56 %), and in fine-grained form (8.20 %). Laboratory tests showed that gold dissolution from ground ore by a cyanide solution without sodium acetate addition was 83.08 %. However, with sodium acetate addition (0.1; 0.5; 1.0 kg/t), it increased to 84.38-86.61 %. Semi-pilot laboratory tests under heap-leaching conditions confirmed the positive effects of sodium acetate. The increase in gold extraction was 7.6 % (62.9 %) compared with that in the experiments without reagent addition (55.30 %).

A first principles study of the electronic structure and optical response of heterobimetallic M-dicyanoaurate-based coordination polymers (M = Mn, Co, Ni, Zn and Cd)

The electronic structure and derived optical properties of five synthesized metal-dicyanoaurate(I), (K)M[Au(CN)2], (M = Mn, Co, Ni, Zn and Cd), coordination polymers are described from a combined experimental analysis and theoretical study based on density functional theory. In this sense, the topological features that influence the electronic structure, which in turn give rise to electronic transitions associated with the band gap energy, are studied from first principles calculations (with hybrid HSE06 and GGA-PBE density functionals) and electronic spectroscopy. The impact of gold (through spin-orbit coupling) and aurophilic interactions on the electronic transitions that gives rise to optical properties is described. The calculated projected density of states and band dispersion diagrams shed light on the molecular orbital distribution and the role of a dicyanoaurate(I) molecular block as the origin of the optical properties. Infrared, Raman and ultraviolet-visible spectroscopic analyses reveal the effect that charge transfer interactions, of a metal → ligand and metal → metal nature, have on the electronic behavior within the solids through association with the polarizing power of transition metals and gold atoms.

Chemical Flexibility of Atomically Precise Metal Clusters

Ligand-protected metal clusters possess hybrid properties that seamlessly combine an inorganic core with an organic ligand shell, imparting them exceptional chemical flexibility and unlocking remarkable application potential in diverse fields. Leveraging chemical flexibility to expand the library of available materials and stimulate the development of new functionalities is becoming an increasingly pressing requirement. This Review focuses on the origin of chemical flexibility from the structural analysis, including intra-cluster bonding, inter-cluster interactions, cluster-environments interactions, metal-to-ligand ratios, and thermodynamic effects. In the introduction, we briefly outline the development of metal clusters and explain the differences and commonalities of M(I)/M(I/0) coinage metal clusters. Additionally, we distinguish the bonding characteristics of metal atoms in the inorganic core, which give rise to their distinct chemical flexibility. Section 2 delves into the structural analysis, bonding categories, and thermodynamic theories related to metal clusters. In the following sections 3 to 7, we primarily elucidate the mechanisms that trigger chemical flexibility, the dynamic processes in transformation, the resultant alterations in structure, and the ensuing modifications in physical-chemical properties. Section 8 presents the notable applications that have emerged from utilizing metal clusters and their assemblies. Finally, in section 9, we discuss future challenges and opportunities within this area.

Computational Insights into the Photoinduced Dimeric Gold-Catalyzed Divergent Dechloroalkylation of gem-Dichloroalkanes with Alkenes

The employment of dinuclear Au(I) catalysts in photomediated modern organic transformations has attracted significant attention over the past decade, which commonly demonstrates unique catalytic performance compared with the corresponding mononuclear gold complexes. Nevertheless, detailed mechanisms of dinuclear gold catalysis remain ambiguous, and further mechanistic understanding is highly desirable. Herein, computational studies were carried out to gain mechanistic insights into the photoinduced dinuclear gold-catalyzed divergent dechloroalkylation of gem-dichloroalkanes. Computational results suggest that a proton transfer from the additive, Hantzsch ester (HE), to the base, guanidine, could lead to an ionic pair complex, which is ready to undergo excitation under blue light irradiation to result in the corresponding triplet excited state. Then, the excited complex might undergo oxidative quenching with the dinuclear gold photocatalyst [AuI-AuI]2+, via a single-electron-transfer (SET) step to afford an unusual [Au1/2-Au1/2]+ dinuclear species. The corresponding mononuclear gold catalyst, [AuI]+, however, is not ready to enable the analogous step to give a [Au0] species, which might account for the unique characteristics of dinuclear gold catalysis. Subsequently, the formed [Au1/2-Au1/2]+ intermediate could trigger a Cl-atom transfer from dichloromethane in an inner-sphere manner to furnish a critical chloromethyl radical. Next, the resulting chloromethyl radical could attack the alkenyl moiety of substrates to generate the corresponding alkyl radicals. Then, three possible mechanistic pathways were explored to rationalize the substrate-dependent divergent transformations in this protocol. The main factors responsible for the diversified transformations were discussed.

Heteronuclear Gold(I)-Copper(I) Complexes with Thia- and Mixed Thia-Aza Macrocyclic Ligands: Synthesis, Structures and Optical Properties

The reactivity of the heterometallic polynuclear complexes [{Au(R)2 }2 Cu2 (MeCN)2 ]n (R=C6 F5 , C6 Cl5 ) with the thioether crowns 1,4,7-trithiacyclononane (L1, [12]aneS3 ), 1,4,8,11-tetrathiacyclododecane (L2, [14]aneS4 ), 1,4,7,10,13,16,19,22-octathiacyclotetracosane (L3, [24]aneS8 ), and the quinoline functionalized pendant arm derivatives of the 12-membered mixed-donor macrocycles 1-aza-,4,7,10-trithiacyclododecane ([12]aneNS3 ) and 1,7-diaza-4,10-dithiacyclododecane ([12]aneN2 S2 ), L4 and L5, respectively, was investigated in THF solution. While with L4 and L5 only ionic compounds of general formulation [Cu(L)][Au(R)2 ] were isolated and structurally characterized (none of them featuring Au⋅⋅⋅Cu interactions), with L1-L3, beside similar ionic compounds, some heteronuclear complexes of general formulation [{Au(R)2 }{Cu(L)}] and featuring Au⋅⋅⋅Cu interactions were also obtained. All of them display rather unusual non-classical C-H⋅⋅⋅Au hydrogen interactions. The complexes display in the solid state different optical properties related to their structures, which have been studied experimentally and theoretically via TD-DFT calculations. In particular, all compounds of the type [{Au(R)2 }{Cu(L)}] featuring Au⋅⋅⋅Cu metallophilic interactions display luminescence in the solid state both at room temperature (RT) and at 77 K. On the contrary, ionic compounds of general formulation [Cu(L)][Au(R)2 ], except [Cu(L4)][Au(C6 F5 )2 ], are not luminescent.

Unlocking the catalytic potential of gold(II) complexes: a comprehensive reassessment

Gold(II) complexes, unlike their gold(I) and gold(III) counterparts, have been sparsely employed in the field of catalysis. This is primarily due to the challenges associated with isolating and characterising these open-shell species. However, these complexes offer a wide range of possibilities. On one hand, this intermediate oxidation state has proven to be more easily accessible through reduction and oxidation processes compared to the gold(I)/gold(III) redox couple, thereby facilitating potential homo-coupling and cross-coupling reactions. On the other hand, gold(II) exhibits Lewis acid behaviour, bridging the characteristics of the soft acid gold(I) and the hard acid gold(III). In this review, we focus on mono- and dinuclear gold(II) complexes, whether they are isolated and well-studied or proposed as intermediates in cross-coupling reactions induced by the action of oxidants or light. We delve into the unique reactivity and potential applications of these gold(II) species, shedding light on their role in this field. This comprehensive exploration aims to underscore the latent promise of gold(II) complexes in catalysis, offering insights into their structural and mechanistic aspects while highlighting their relevance in contemporary chemical transformations.

Visible Light Responsive Dinuclear Zinc Complex Consisting of Proximally Arranged Two d10 -Zinc Centers

So far, Zn(II)-based d10 complexes have been known to be colorless unless they are accompanied by chromophoric groups, and therefore both fundamental and advanced photophysical performance of Zn centers of complexes, especially in visible-light regions has been unexplored. Here, we first demonstrate a dinuclear Zn(II) complex that shows visible light absorption using an orbital distributed over closely contacted two Zn centers experimentally determined by X-ray crystallography. A contrastive study demonstrated that intermetallic orbital interaction in dinuclear Zn(II) complex is responsible for capturing visible light to exhibit orangish yellow color, whereas an analogous one without such an interaction is colorless. This work demonstrates that introduction of Zn-Zn interactions to Zn(II) molecules contradicts the common notion that Zn is unresponsive to visible light and expands the photophysical field of zinc chemistry.

Linkage of the Dinuclear Gold(I) Complex Luminescence and Origin of Endocyclic Amino Group of Cyclic P2N2-Bridging Ligands

Gold(I) complexes of LAu2Cl2 composition based on P2N2 ligands, namely 1,5-diaza-3,7-diphosphacyclooctanes, containing ethylpyridyl substituents at the phosphorus atoms and sp2- or sp3-hybridized endocyclic nitrogen atoms were synthesized. The SCXRD analysis indicated the strong impact of the geometry of the nitrogen atom on the structure and conformational flexibility of the complexes. The N-aryl substituted ligand with the planar endocyclic nitrogen atom provides higher flexibility of the complex and an ability to bind the solvent molecules in the "host-guest" mode, whereas that kind of behavior is forbidden for the complex with an N-alkyl substituted ligand with a pyramidal nitrogen atom. The substituents at nitrogen atoms also control the origin of the emission, which is phosphorescence for the N-aryl substituted complex and fluorescence for the N-alkylaryl substituted complex. The phosphorescent gold(I) complex displays high cytotoxicity without selectivity toward the m-HeLa and normal cells, but the core-shell nanoparticles formed on the base of the complex demonstrate reduced cytotoxicity. The luminescence of the NPs allows tracking the complexes in the cell samples.

5-Nitrofuryl-Containing Thiosemicarbazone Gold(I) Compounds: Synthesis, Stability Studies, and Anticancer Activity

This work describes the synthesis of four gold(I) [AuClL] compounds containing chloro and biologically active protonated thiosemicarbazones based on 5-nitrofuryl (L=HSTC). The stability of the compounds in dichloromethane, DMSO, and DMSO/culture media solutions was investigated by spectroscopy, cyclic voltammetry, and conductimetry, indicating the formation overtime of cationic monometallic [Au(HTSC)(DMSO)]± or [Au(HTSC)2 ]± , and/or dimeric species. Neutral [{Au(TSC)}2 ] species were obtained from one of the compounds in dichlomethane/n-hexane solution and characterized by X-ray crystallography revealing a Au-Au bond, and deprotonated thiosemicarbazone (TSC). The cytotoxicity of the gold compounds and thiosemicarbazone ligands was evaluated against selected cancer cell lines and compared to that of Auranofin. Studies of the most stable, cytotoxic, and selective compound on a renal cancer cell line (Caki-1) demonstrated its relevant antimigratory and anti-angiogenic properties, and preferential accumulation in the cell nuclei. Its mode of action seems to involve interaction with DNA, and subsequent cell death via apoptosis.

The borderless world of chemical bonding across the van der Waals crust and the valence region

The definition of the van der Waals crust as the spherical section between the atomic radius and the van der Waals radius of an element is discussed and a survey of the application of the penetration index between two interacting atoms in a wide variety of covalent, polar, coordinative or noncovalent bonding situations is presented. It is shown that this newly defined parameter permits the comparison of bonding between pairs of atoms in structural and computational studies independently of the atom sizes.

Zwitterionic Bergman cyclization triggered polymerization gives access to metal-graphene nanoribbons using a boron metal couple

With the rapid growth in artificial intelligence, designing high-speed and low-power semiconducting materials is of utmost importance. This investigation provides a theoretical basis to access covalently bonded transition metal-graphene nanoribbon (TM-GNR) hybrid semiconductors whose DFT-computed bandgaps were much narrower than the commonly used pentacene. Systematic optimization of substrates containing remotely placed boryl groups and the transition metals produced the zwitterions via ionic Bergman cyclization (i-BC) and unlocked the polymerization of metal-substituted polyenynes. Aside from i-BC, the subsequent steps were barrierless, which involved structureless transition regions. Multivariate analysis revealed the strong dependence of activation energy and the cyclization mode on the electronic nature of boron and Au(I). Consequently, three regions corresponding to radical Bergman (r-BC), ionic Bergman (i-BC), and ionic Schreiner-Pascal (i-SP) cyclizations were identified. The boundaries between these regions corresponded to the mechanistic shift induced by the three-center-three-electron (3c-3e) hydrogen bond, three-center-four-electron (3c-4e) hydrogen bond, and vacant p-orbital on boron. The ideal combination for cascade polymerization was observed near the boundary between i-BC and i-SP.

Near-white light emission from single crystals of cationic dinuclear gold(I) complexes with bridged diphosphine ligands

Three cationic dinuclear Au(I) complexes containing acetonitrile (AN) as an ancillary ligand were synthesized: [μ-L_Me(AuAN)₂]·2BF₄ (1), [μ-L_Et(AuAN)₂]·2BF₄ (2), and [μ-L_iPr(AuAN)₂]·2BF₄ (3) (L_Me = {1,2-bis[bis(2-methylphenyl)phosphino]benzene}, L_Et = {1,2-bis[bis(2-ethylphenyl)phosphino]benzene}, and L_iPr = {1,2-bis[bis(2-isopropylphenyl)phosphino]benzene}). The unique structures of complexes 1-3 with two P-Au(I)-AN rods bridged by rigid diphosphine ligands were determined through X-ray analysis. The Au(I)-Au(I) distances observed for complexes 1-3 were as short as 2.9804-3.0457 Å, indicating an aurophilic interaction between two Au(I) atoms. Unlike complexes 2 and 3, complex 1 incorporated CH₂Cl₂ into the crystals as crystalline solvent molecules. Luminescence studies in the crystalline state revealed that complexes 1 and 2 mainly exhibited bluish-purple phosphorescence (PH) at 293 K: the former had a PH peak wavelength at 415 nm with the photoluminescence quantum yield Φ_PL = 0.12, and the latter at 430 nm with Φ_PL = 0.13. Meanwhile, complex 3 displayed near-white PH, that is dual PH with two PH bands centered at 425 and 580 nm with Φ_PL = 0.44. The PH spectra and lifetimes of complexes 2 and 3 were measured in the temperature range of 77-293 K. The two PH bands observed for complex 3 were suggested to originate from the two emissive excited triplet states, which were in thermal equilibrium. From theoretical calculations, the dual PH observed for complex 3 is explained to occur from the two excited triplet states, T_1H and T_1L: the former exhibits a high-energy PH band (bluish-purple) and the latter exhibits a low-energy PH band (orange). The T_1H state is considered ³ILCT with a structure similar to that of the S₀-optimized structure. Conversely, the T_1L state is assumed to be a ³MLCT with a T₁-optimized structure, which has a short Au(I)-Au(I) bond and two bent rods (Au-AN). The thermal equilibrium between the two excited states is discussed based on computational calculations and photophysical data in the temperature range of 77-293 K. With regard to the crystal of complex 1, we were unable to precisely measure the temperature-dependent emission spectra and lifetimes, particularly at low temperatures, because the cooled crystals became irreversibly turbid over time.

Discrete Singular Metallophilic Interaction in Stable Large 12-Membered Binuclear Silver and Gold Metallamacrocycles of Amido-Functionalized Imidazole and 1,2,4-Triazole-Derived N-Heterocyclic Carbenes

Metallophilic interactions were observed in four pairs of 12-membered metallamacrocyclic silver and gold complexes of imidazole-derived N-heterocyclic carbenes (NHCs), [1-(R¹)-3-N-(2,6-di-(R²)-phenylacetamido)-imidazol-2-ylidene]₂M₂ [R¹ = p-MeC₆H₄, R² = Me, M = Ag (1b) and Au (1c); R¹ = Me, R² = i-Pr, M = Ag (2b) and Au (2c); R¹ = Et, R² = i-Pr, M = Ag (3b) and Au (3c)], and a 1,2,4-triazole-derived N-heterocyclic carbene (NHC), [1-(i-Pr)-4-N-(2,6-di-(i-Pr)-phenylacetamido)-1,2,4-triazol-2-ylidene]₂M₂ [M = Ag (4b) and Au (4c)]. The X-ray diffraction, photoluminescence, and computational studies indicate the presence of metallophilic interactions in these complexes, which are significantly influenced by the sterics and the electronics of the N-amido substituents of the NHC ligands. The argentophilic interaction in the silver 1b-4b complexes was stronger than the aurophilic interaction in the gold 1c-4c complexes, with the metallophilic interaction decreasing in the order 4b > 1b > 1c > 4c > 3b > 3c > 2b > 2c. The 1b-4b complexes were synthesized from the corresponding amido-functionalized imidazolium chloride 1a-3a and the 1,2,4-triazolium chloride 4a salts upon treatment with Ag₂O. The reaction of 1b-4b complexes with (Me₂S)AuCl gave the gold 1c-4c complexes.

Luminescent Complexes of Platinum, Iridium, and Coinage Metals Containing N-Heterocyclic Carbene Ligands: Design, Structural Diversity, and Photophysical Properties

The employment of N-heterocyclic carbenes (NHCs) to design luminescent metal compounds has been the focus of recent intense investigations because of the strong σ-donor properties, which bring stability to the whole system and tend to push the d-d dark states so high in energy that they are rendered thermally inaccessible, thereby generating highly emissive complexes for useful applications such as organic light-emitting diodes (OLEDs), or featuring chiroptical properties, a field that is still in its infancy. Among the NHC complexes, those containing organic chromophores such as naphthalimide, pyrene, and carbazole exhibit rich emission behavior and thus have attracted extensive interest in the past five years, especially carbene coinage metal complexes with carbazolate ligands. In this review, the design strategies of NHC-based luminescent platinum and iridium complexes with large spin-orbit-coupling (SOC) are described first. Subsequent paragraphs illustrate the recent advances of luminescent coinage metal complexes with nucleophilic- and electrophilic-based carbenes based on silver, gold, and copper metal complexes that have the ability to display rich excited state emissions in particular via thermally activated delayed fluorescence (TADF). The luminescence mechanism and excited state dynamics are also described. We then summarize the advance of NHC-metal complexes in the aforementioned fields in recent years. Finally, we propose the development trend of this fast-growing field of luminescent NHC-metal complexes.

Ag(III)···Ag(III) Argentophilic Interaction in a Cofacial Corrole Dyad

Metallophilic interactions between closed-shell metal centers are exemplified by d¹⁰ ions, with Au(I) aurophilic interactions as the archetype. Such an interaction extends to d⁸ species, and examples involving Au(III) are prevalent. Conversely, Ag(III) argentophilic interactions are uncommon. Here, we identify argentophilic interactions in silver corroles, which are authentic Ag(III) species. The crystal structure of a monomeric silver corrole is a dimer in the solid state, and the macrocycle exhibits an atypical domed conformation. In order to evaluate whether this represents an authentic metallophilic interaction or a crystal-packing artifact, the analogous cofacial or "pacman" corrole was prepared. The conformation of the monomer was recapitulated in the silver pacman corrole, exhibiting a short 3.67 Å distance between metal centers and a significant compression of the xanthene backbone. Theoretical calculations support the presence of a rare Ag(III)···Ag(III) argentophilic interaction in the pacman complex.

Spectroscopic mapping of the gold complex oligomers (dimer, trimer, tetramer, and pentamer) by excited-state coherent nuclear wavepacket motion in aqueous solutions

We investigate the excited-state dynamics of the [Au(CN)₂^-] oligomers following photo-initiated intermolecular Au-Au bond formation by carrying out femtosecond time-resolved absorption and emission measurements at various concentrations (0.080-0.6 mol dm^-3) with different photoexcitation wavelengths (290-340 nm). The temporal profiles of the time-resolved absorption signals exhibit clear oscillations arising from the Au-Au stretch coherent wavepacket motion of the excited-state oligomers, which is initiated with the photo-induced Au-Au bond formation. The frequency of the observed oscillation is changed with the change of the concentration, excitation wavelength, and wavelength of the excited-state absorption monitored, reflecting the change in the size of the oligomers detected. Fourier transforms (FTs) of the oscillations provide 2D plots of the FT amplitude against the oscillation frequency versus the detected wavelengths. Because the FT amplitude exhibits a node at the peak wavelength of the absorption of the species that gives rise to the oscillation, the 2D plots enabled us to determine the peak wavelength of the excited-state absorption of the dimer, trimer, tetramer, and pentamer. We also performed femtosecond time-resolved absorption measurements for the 0.3 mol dm^-3 solution with 260 nm photoexcitation, which is the condition employed in previous time-resolved X-ray studies (e.g., K. H. Kim et al. Nature, 2015, 518 (7539), 385-389). It was found that various excited-state oligomers, including the dimer, were simultaneously generated under this condition, although the analysis of the previous time-resolved X-ray studies was made by assuming that only the excited-state trimer was generated. The obtained results show that the excited-state dynamics of the trimer claimed based on the time-resolved X-ray data is questionable and that re-analysis and re-examining of its data are necessary.

Intra- vs Intermolecular Aurophilic Contacts in Dinuclear Gold(I) Compounds: Impact on the Population of the Triplet Excited State

Two series of dinuclear gold(I) complexes that contain two Au-chromophore units (chromophore = dibenzofurane or dimethylfluorene) connected through a diphosphane bridge that differs in the flexibility and length (diphosphane = dppb for 1,4-bis(diphenylphosphino)butane, DPEphos for bis[(2-diphenylphosphino)phenyl]ether, xanthphos for 4,5-bis(diphenylphosphino)-9,9-dimethylxanthene, and BiPheP for 2,2'-bis(diphenylphosphino)-1,1'-biphenyl) have been synthesized and structurally characterized. Their photophysical properties have been carefully investigated, paying attention to the role of the presence, or absence, of aurophilic contacts and their nature (intra- or intermolecular character). This analysis was permitted due to the X-ray crystallographic determination of all of the structures of the compounds discussed herein. The quantum yields of the triplet population, ϕ_T, have been calculated by nanosecond-laser flash photolysis measurements, and we could determine the main role of the character of the aurophilic contacts in the resulting ϕ_T, being especially favored in the presence of intermolecular contacts. Time-dependent density functional theory (TD-DFT) calculations support the absorption and emission assignments and the shorter distance between S₁ and the closest triplet excited state energy in the case of the compounds with a higher triplet-state population.

Photoinduced Ion-Pair Inner-Sphere Electron Transfer-Reversible Addition-Fragmentation Chain Transfer Polymerization

Photoredox-mediated reversible deactivation radical polymerization (RDRP) is a promising method of precise synthesis of polymers with diverse structures and properties. However, its mechanism mainly based on the outer-sphere electron transfer (OSET) leads to stringent requirements for an efficient photocatalyst. In this paper, the zwitterionic organoboranes [L₂B]⁺X^- are prepared and applied in reversible addition-fragmentation chain transfer (RAFT) polymerization with the photoinduced ion-pair inner-sphere electron transfer (IP-ISET) mechanism. The ion-pair electron transfer mechanism and the formation of the radical [L₂B]^• are supported by electron paramagnetic resonance (EPR) radical capture experiments, ¹H/¹¹B NMR spectroscopy, spectroelectrochemical spectroscopy, transient absorption spectroscopy, theoretical calculation, and photoluminescence quenching experiments. Photoluminescence quenching experiments show that when [CTA]/[[L₂B]⁺] ≥ 0.6, it is static quenching because of the in situ formation of [L₂B]⁺[ZCS₂]^-, the real catalytic species. [L₂B]⁺[C₃H₇SCS₂]^- is synthesized, and its photoluminescence lifetime is the same as the lifetime in the static quenching experiment, indicating the formation of [L₂B]⁺[ZCS₂]^- in polymerization and the IP-ISET mechanism. The matrix-assisted laser desorption ionization time-of-flight mass (MALDI-TOF MS) spectra show that the structure of [C₃H₇SCS₂] was incorporated into the polymer, indicating that ion-pair electron transfer occurs in catalytic species. The polymerization shows high catalytic activity at ppb catalyst loading, a wide range of monomers, excellent tolerance in the presence of 5 mol % phenolic inhibitors, and the synthesis of ultrahigh-molecular-weight polymers. This protocol with the IP-ISET mechanism exhibits a value in the development of new organic transformations and polymerization methods.

Atomically Precise Enantiopure Bimetallic Janus Clusters

Asymmetric bimetallic Janus nanocrystals with a side-by-side interface have unique properties and important applications. However, understanding their fundamental issues, including their formation mechanism, interfacial linkage, and related properties, remains challenging, as does the preparation of enantiopure samples. Atomically precise Janus bimetal nanoclusters would unequivocally resolve these issues, yet they have not been realized. Here, based on Au and transition metals (Cu/Cd), and employing an S/P biligand strategy, we prepare and structurally resolve four Janus nanoclusters, including racemate 6e Au 8 /Cu 4 , 6e R -/ S-Au 8 /Cu 4 enantiomers, and 2e racemate Au 3 /Cd. Their interfacial linkage is unambiguously resolved at the atomic level, superatomic orbital splitting emerges, and unique molecule-like electronic transitions and chiroptical properties are present; more importantly, the dipolar distribution of bicomponents leads to a maximum dipole moment of up to 45 D, which drives the formation of 1D nanowires through self-assembly. This work provides a fundamental knowledge of intermetallic nanomaterials and an avenue for the synthesis of Janus nanoclusters.

Porous Supramolecular Assembly of Pentiptycene-Containing Gold(I) Complexes: Persistent Excited-State Aurophilicity and Inclusion-Induced Emission Enhancement

We report herein a porous supramolecular framework formed by a linear mononuclear Au(I) complex (1) via the tongue-and-groove-like joinery between the pentiptycene U-cavities (grooves) and the rod-shaped π-conjugated backbone and alkyl chains (tongues) with the assistance of C-H···π and aurophilic interactions. The framework contains distorted tetrahedral Au₄ units, which undergo stepwise and persistent photoinduced Au(I)-Au(I) bond shortening (excited-state aurophilicity), leading to multicolored luminescence photochromism. The one-dimensional pore channels could accommodate different solvates and guests, and the guest inclusion-induced luminescence enhancement (up to 300%) and/or vapochromism are characterized. A correlation between the aurophilic bonding and the luminescence activity is uncovered by TDDFT calculations. Isostructural derivatives 2 and 3 corroborate both the robustness of the porous supramolecular assembly and the mechanisms of the stimulation-induced luminescence properties of 1. This work demonstrates the cooperation of aurophilicity and structural porosity and adaptability in achieving novel supramolecular photochemical properties.

Noncovalent Synergy: Aurophilicity and Aryl Stacking in Bis(gold(I)aryl)-dmpm Complexes

Bis(dimethylphosphino)methane (dmpm) was used as a ligand to synthesize four semi-supported dinuclear gold(I) complexes, dmpm(AuR)₂ (R = Cl, C₆H₅, C₆Cl₅, and C₆F₅), which were studied concerning the synergistic effects of two weak noncovalent interactions: aurophilic and aryl-aryl stacking interactions. The chloro-substituted complex was synthesized by the ligand substitution of (tht)AuCl with dmpm and further functionalized by the reaction with PhMgBr or in situ-generated C₆Cl₅Li to afford the phenyl- and pentachlorophenyl-substituted compounds, respectively. The pentafluorophenyl-substituted gold complex was generated by the ligand substitution of (tht)Au(C₆F₅) with dmpm. All complexes were characterized by multinuclear NMR spectroscopy, CHN analyses, and X-ray diffraction experiments. Additionally, the basic photoluminescence properties of dmpm(AuCl)₂, dmpm(AuC₆Cl₅)₂, and dmpm(AuC₆F₅)₂ were examined. The aggregation behavior of dmpm(AuC₆F₅)₂ was further investigated by variable-temperature diffusion-ordered NMR spectroscopy experiments.

Light-Induced Ultrafast Molecular Dynamics: From Photochemistry to Optochemistry

By precisely controlling the waveform of ultrashort laser fields, electronic and nuclear motions in molecules can be steered on extremely short time scales, even in the attosecond regime. This new research field, termed "optochemistry", presents the light field in the time-frequency domain and opens new avenues for tailoring molecular reactions beyond photochemistry. This Perspective summarizes the ultrafast laser techniques employed in recent years for manipulating the molecular reactions based on waveform control of intense ultrashort laser pulses, where the chemical reactions can take place in isolated molecules, clusters, and various nanosystems. The underlying mechanisms for the coherent control of molecular dynamics are explicitly explored. Challenges and opportunities coexist in the field of optochemistry. Advanced technologies and theoretical modeling are still being pursued, with great prospects for controlling chemical reactions with unprecedented spatiotemporal precision.

Ratiometric and Colorimetric Optical Thermometers Using Emissive Dimeric and Trimeric {[Au(SCN)2 ]- }n Moieties Generated in d-f Heterometallic Assemblies

Gold complexes can generate excimers ([Au₂ ]→[Au₂ ]*) and exciplexes ([Au₃ ]→[Au₃ ]*) with light excitation. Four Gd^III and Y^III complexes were assembled with dimeric {[Au(SCN)₂ ]^- }₂ and trimeric {[Au(SCN)₂ ]^- }₃ bis(thiocyanato)gold(I) counterions. The vibrational signature associated with the Au⋅⋅⋅Au vibrational mode was probed with ultralow frequency (ULF) Raman spectroscopy as a function of temperature. Emission spectroscopy was used to explore photophysical properties. Two broad features in the high- and low-energy regions were associated with the fluorescence and phosphorescence of the gold entities, respectively. Temperature-dependent luminescence measurements showed that the emission color can be tuned from blue to green via cyan and white. Hence, these complexes can act as colorimetric thermometers. Additionally, a ratiometric thermal sensing ability was incorporated with high sensitivity up to 5 % K^-1 in the cryogenic temperature range.

Stronger-together: the cooperativity of aurophilic interactions

Crystallographic distances and the electron density of bi- and tri-nuclear gold(I) compounds reveal that the existence of multiple Au⋯Au interactions increases their individual strength in the order of 0.9-2.9 kcal mol^-1. We observed this behaviour both experimentally and theoretically in multinuclear systems, confirming a novel important cooperative character in aurophilic contacts.

Cyclic Trinuclear Copper(I) Complex Exhibiting Aggregation-Induced Emission: A Novel Fluorescent Probe for the Selective Detection of Gold(III) Ions

Coordination complexes with aggregation-induced-emission (AIE) behavior has drawn much attention because of their promising applications. Conventionally, the AIE-active metal-organic complexes are prepared from an AIE-active organic ligand, and the construction of such coordination complexes from aggregation-caused-quenching (ACQ) ligands is still challenging. Herein, we have synthesized two new cyclic trinuclear complexes (CTCs), namely, 1 and 2, from copper(I) and silver(I) and a ACQ ligand [4-(3,5-dimethyl-1H-pyrazol-4-yl)benzaldehyde, HL]. (1) exhibited AIE behavior, and the emission intensity is enhanced ∼20 times when it aggregates, which can be attributed to its tight packing and multiple intermolecular hydrogen bonds that restrained the intramolecular rotation, as confirmed by single-crystal X-ray diffraction analysis. On the other hand, (2) displayed ACQ effects, and the emission intensity is decreased ∼5 times when it aggregates. This ACQ behavior of 2 is related to its loose packing and free rotation of the ligand in crystals, resulting in nonradiative decay and fluorescence quenching. Interestingly, the CTCs 1 and 2 both exhibited a good affinity to gold(III) ions, allowing selective detection and sensing of gold ions. More importantly, the 2 shows a good limit of detection (3.28 μmol/L) and an ultrafast responsive time (∼2 s). Our studies pave a new route to designing novel AIE-active coordination complexes and further exploring the functionality of CTCs.

An Insight, at the Atomic Level, into the Intramolecular Metallophilic Interaction in Nanoclusters

The intermolecular metallophilic interaction has been exploited to orderly aggregate nanocluster compounds into multidimensional assemblies, while the intramolecular metallophilic interaction was rarely reported. Herein, based on an Au13Cu2 nanocluster template,...

Gold catalyzed efficient preparation of dihydrobenzofuran from 1,3-enyne and phenol

A gold catalyzed formal intermolecular [2+3] cyclo-coupling of 1,3-enynes with phenols was developed to prepare dihydrobenzofuran derivatives with the addition of 2,6-dichloropyridine N-oxide, in which, a highly ortho-selective phenol S_EAr functionalization was achieved by using 1,3-enynes as α-oxo vinyl gold carbenoid surrogates.

Dinuclear gold(I) complexes with N-phosphanyl, N-heterocyclic carbene ligands: synthetic strategies, luminescence properties and anticancer activity

A small library of dinuclear gold(I) complexes with the title ligands has been prepared, encompassing neutral, mono- and dicationic complexes. The luminescence properties of the complexes in the solid state have been evaluated, and it turns out that neutral and monocationic complexes not presenting a rigid metallamacrocyclic structure can exhibit rather strong emissions that extend towards the red region of the visible spectrum. The in vitro anticancer activity of the complexes has been also preliminarly evaluated; cytotoxicity seems to correlate with complex lipophilicity, whereas selectivity towards cancer cells can be apparently enhanced upon a judicious choice of the ligands.

Investigation of Solvatomorphism and Its Photophysical Implications for Archetypal Trinuclear Au3(1-Methylimidazolate)3

A new solvatomorph of [Au₃(1-Methylimidazolate)₃] (Au₃(MeIm)₃)—the simplest congener of imidazolate-based Au(I) cyclic trinuclear complexes (CTCs)—has been identified and structurally characterized. Single-crystal X-ray diffraction revealed a dichloromethane solvate exhibiting remarkably short intermolecular Au⋯Au distances (3.2190(7) Å). This goes along with a dimer formation in the solid state, which is not observed in a previously reported solvent-free crystal structure. Hirshfeld analysis, in combination with density functional theory (DFT) calculations, indicates that the dimerization is generally driven by attractive aurophilic interactions, which are commonly associated with the luminescence properties of CTCs. Since Au₃(MeIm)₃ has previously been reported to be emissive in the solid-state, we conducted a thorough photophysical study combined with phase analysis by means of powder X-ray diffraction (PXRD), to correctly attribute the photophysically active phase of the bulk material. Interestingly, all investigated powder samples accessed via different preparation methods can be assigned to the pristine solvent-free crystal structure, showing no aurophilic interactions. Finally, the observed strong thermochromism of the solid-state material was investigated by means of variable-temperature PXRD, ruling out a significant phase transition being responsible for the drastic change of the emission properties (hypsochromic shift from 710 nm to 510 nm) when lowering the temperature down to 77 K.

Modern History of Organic Conductors: An Overview

This short review article provides the reader with a summary of the history of organic conductors. To retain a neutral and objective point of view regarding the history, background, novelty, and details of each research subject within this field, a thousand references have been cited with full titles and arranged in chronological order. Among the research conducted over ~70 years, topics from the last two decades are discussed in more detail than the rest. Unlike other papers in this issue, this review will help readers to understand the origin of each topic within the field of organic conductors and how they have evolved. Due to the advancements achieved over these 70 years, the field is nearing new horizons. As history is often a reflection of the future, this review is expected to show the future directions of this research field.

White light employing luminescent engineered large (mega) Stokes shift molecules: a review

Large (mega) Stokes shift molecules have shown great potential in white light emission for optoelectronic applications, such as flat panel display technology, light-emitting diodes, photosensitizers, molecular probes, cellular and bioimaging, and other applications. This review aims to summarize recent developments of white light generation that incorporate a large Stokes shift component, key approaches to designing large Stokes shift molecules, perspectives on future opportunities, and remaining challenges confronting this emerging research field. After a brief introduction of feasible pathways in generating white light, exemplifications of large Stokes shift molecules as white light candidates from organic and inorganic-based materials are illustrated. Various possible ways to design such molecules have been revealed by integrating the photophysical mechanisms that are essential to produce red-shifted emission upon photoexcitation, such as excited state intramolecular proton transfer (ESIPT), intramolecular charge transfer (ICT), excited state geometrical relaxation or structural deformation, aggregation-induced emission (AIE) alongside the different formations of aggregates, interplay between monomer and excimer emission, host-guest interaction, and lastly metal to ligand charge transfer (MLCT) via harvesting triplet state. Furthermore, previously reported fluorescent materials are described and categorized based on luminescence behaviors on account of the Stokes shifts value. This review will serve as a rationalized introduction and reference for researchers who are interested in exploring large or mega Stokes shift molecules, and will motivate new strategies along with instigation of persistent efforts in this prominent subject area with great avenues.

Dual Emissive Gold(I)-Sulfido Cluster Framework Capable of Benzene-Cyclohexane Separation in the Solid State Accompanied by Luminescence Color Changes

A decanuclear gold(I)-sulfido complex, [(L^H)₄Au₁₀S₄]Cl₂ (L^H-Au₁₀S₄-Cl, where L^H = 4,5-bis(diphenylphosphanyl)-2H-1,2,3-triazole), assembled from the reaction of H₂S with the chlorogold(I) precursor obtained from the click reaction of [dppa(AuCl)₂] (where dppa = 1,2-bis(diphenylphosphino)acetylene) with NaN₃, is shown to display a bright dual green and red emission in the solid state. Single crystal X-ray diffraction (SCXRD) studies indicate a gold(I) cluster-based framework assembled through intermolecular halogen···hydrogen bonds as well as other weak interactions. The framework of L^H-Au₁₀S₄-Cl is found to display high stability toward solvent molecules, with capability to encapsulate solvent molecules, such as benzene and cyclohexane, inside the crystal lattice voids via a single-crystal-to-single-crystal (SCSC) transformation. With different degrees of influence on the dual green and red emission, crystalline solids of L^H-Au₁₀S₄-Cl exhibit remarkable solvatochromic luminescence in the presence of benzene and cyclohexane. Notably, due to the size confinement of the lattice cavities, the L^H-Au₁₀S₄-Cl solids exhibit a high selectivity (>95%) toward benzene in a mixture of equimolar concentration of benzene and cyclohexane. This work has demonstrated the promising capability of gold(I)-sulfido cluster frameworks to serve as luminescent functional materials for the separation of benzene and cyclohexane.

Multidisciplinary study on the hydrogelation of the digold(i) complex [{Au(9N-adeninate)}2(μ-dmpe)]: optical, rheological, and quasi-elastic neutron scattering perspectives

Non-conventional experimental techniques such as rheology or QENS will aid synthetic inorganic chemists to broaden the knowledge on gold(i) hydrometallogels’ structure and properties and to understand their expected relationship.

Dinuclear gold catalysis

This review summarizes the recent achievements of dinuclear gold-catalyzed redox coupling, asymmetric catalysis and photocatalysis. The dinuclear gold catalysts show a better catalytic performance than the mononuclear gold catalysts in certain cases.

Keep it tight: a crucial role of bridging phosphine ligands in the design and optical properties of multinuclear coinage metal complexes

Copper subgroup metal ions in the +1 oxidation state are classical candidates for aggregation via non-covalent metal-metal interactions, which are supported by a number of bridging ligands. The bridging phosphines, soft donors with a relatively labile coordination to coinage metals, serve as convenient and essential components of the ligand environment that allow for efficient self-assembly of discrete polynuclear aggregates. Simultaneously, accessible and rich modification of the organic spacer of such P-donors has been used to generate many fascinating structures with attractive photoluminescent behavior. In this work we consider the development of di- and polynuclear complexes of M(i) (M = Cu, Ag, Au) and their photophysical properties, focusing on the effect of phosphine bridging ligands, their flexibility and denticity.

Aggregation-induced phosphorescence sensitization in two heptanuclear and decanuclear gold-silver sandwich clusters

The strategy of aggregation-induced emission enhancement (AIEE) has been proven to be efficient in wide areas and has recently been adopted in the field of metal nanoclusters. However, the relationship between atomically precise clusters and AIEE is still unclear. Herein, we have successfully obtained two few-atom heterometallic gold-silver hepta-/decanuclear clusters, denoted Au6Ag and Au9Ag, and determined their structures by X-ray diffraction and mass spectrometry. The nature of the Au^I⋯Ag^I interactions thereof is demonstrated through energy decomposition analysis to be far-beyond typical closed-shell metal-metal interaction dominated by dispersion interaction. Furthermore, a positive correlation has been established between the particle size of the nanoaggregates and the photoluminescence quantum yield for Au6Ag, manifesting AIEE control upon varying the stoichiometric ratio of Au : Ag in atomically-precise clusters.

Molecular gold strings: aurophilicity, luminescence and structure-property correlations

This review covers the compound class of one-dimensional gold strings. These compounds feature a formally infinite repetition of gold complexes as monomers/repeating units that are held together by aurophilic interactions, i.e. direct gold-gold contacts. Their molecular structures are primarily determined in the solid state using single crystal X-ray diffraction. The chemical composition of the employed gold complexes is diverse and furthermore plays a key role in terms of structure characteristics and the resulting properties. One of the most common features of gold strings is their photoluminescence upon UV excitation. The emission energy is often dependent on the distance of adjacent gold ions and the electronic structure of the whole string. In terms of gold strings, these parameters can be fine-tuned by external stimuli such as solvent, pH value, pressure or mechanical stress. This leads to direct structure-property correlations, not only with regard to the photophysical properties, but also electric conductivity for potential application in nanoelectronics. Concerning these correlations, gold strings, consisting of self-assembled individual complexes as building blocks, are the ideal compound class to look at, as perturbations by an inhomogeneity in the ligand sphere (such as the end of a molecule) can be neglected. Therefore, the aim of this review is to shed light on the past achievements and current developments in this area.

Coinage-Metal-Based Cyclic Trinuclear Complexes with Metal-Metal Interactions: Theories to Experiments and Structures to Functions

Among the d¹⁰ coinage metal complexes, cyclic trinuclear complexes (CTCs) or trinuclear metallocycles with intratrimer metal-metal interactions are fascinating and important metal-organic or organometallic π-acids/bases. Each CTC of characteristic planar or near-planar trimetal nine-membered rings consists of Au(I)/Ag(I)/Cu(I) cations that linearly coordinate with N and/or C atoms in ditopic anionic bridging ligands. Since the first discovery of Au(I) CTC in the 1970s, research of CTCs has involved several fundamental areas, including noncovalent and metallophilic interaction, excimer/exciplex, acid-base chemistry, metalloaromaticity, supramolecular assemblies, and host/guest chemistry. These allow CTCs to be embraced in a wide range of innovative potential applications that include chemical sensing, semiconducting, gas and liquid adsorption/separation, catalysis, full-color display, and solid-state lighting. This review aims to provide a historic and comprehensive summary on CTCs and their extension to higher nuclearity complexes and coordination polymers from the perspectives of synthesis, structure, theoretical insight, and potential applications.