Revisiting the Limiting Factors for Overall Water-Splitting on Organic Photocatalysts

Recyclable and Stable Porphyrin-Based Self-Assemblies by Electrostatic Force for Efficient Photocatalytic Organic Transformation

Development of efficient, stable, and recyclable photocatalysts for organic synthesis is vital for transformation of traditional thermal organic chemistry into green sustainable organic chemistry. In this work, the study reports an electrostatic approach to assemble meso-tetra (4-sulfonate phenyl) porphyrin (TPPS)tetra (4-sulfonate phenyl) porphyrin (TPPS) as a donor and benzyl viologen (BV) as an acceptor into stable and recyclable photocatalyst for an efficient organic transformation reaction - aryl sulfide oxidation. By use of the electrostatic TPPS-BV photocatalysts, 0.1 mmol aryl sulfide with electron-donating group can be completely transformed into aryl sulfoxide in 60 min without overoxidation into sulfone, rendering near 100% yield and selectivity. The photocatalyst can be recycled up to 95% when 10 mg amount is used. Mechanistic study reveals that efficient charge separation between TPPS and BV results in sufficient formation of superoxide which further reacts with the oxidized sulfide by the photocatalyst to produce the sulfoxide. This mechanistic pathway differs significantly from the previously proposed singlet oxygen-dominated process in homogeneous TPPS photocatalysis.

Photo-oxidation of methanol in complexes with pyrido[2,3-b]pyrazine: a nonadiabatic molecular dynamics study

Excited-state Proton-Coupled Electron Transfer (PCET) constitutes a key step in the photo-oxidation of small, electron-rich systems possessing acidic hydrogen atoms, such as water or alcohols, which can play a vital role in green hydrogen production. In this contribution, we employ ab initio quantum-chemical methods and on-the-fly nonadiabatic molecular dynamics simulations to study the mechanism and the photodynamics of PCET in 1 : 1 pyrido[2,3-b]pyrazine complexes with methanol. We find the process to be ultrafast and efficient when the intramolecular hydrogen bond is formed with one of the β-positioned nitrogen atoms. The complex exhibiting a hydrogen bond with an isolated nitrogen site, on the contrary, shows much lower reactivity. We explain this effect with the stabilization of the reactive ππ* charge-transfer electronic state in the former case.

Fully Conjugated 2D sp2 Carbon-Linked Covalent Organic Frameworks for Photocatalytic Overall Water Splitting

Covalent organic frameworks (COFs) hold great promise for solar-driven hydrogen production. However, metal-free COFs for photocatalytic overall water splitting remain elusive, primarily due to challenges in simultaneously regulating their band structures and catalytic sites to enable concurrent half-reactions. Herein, two types of π-conjugated COFs containing the same donor-acceptor structure are constructed via Knoevenagel condensation and Schiff base reaction to afford cyanovinylene- and imine-bridged COFs, respectively. The difference in the linkage leads to a remarkable difference in their photocatalytic activity toward water splitting. The 2D sp2 carbon-linked COF exhibits notable activity for photocatalytic overall water splitting, which can reach an apparent quantum efficiency of 2.53% at 420 nm. In contrast, the 2D imine-linked COF cannot catalyze the overall water-splitting reaction. Mechanistic investigations reveal that the cyanovinylene linkage is essential in modulating the band structure and promoting charge separation in COFs, thereby enabling overall water splitting. Moreover, it is further shown that crystallinity substantially impacts the photocatalytic performance of COFs. This study represents the first successful example of developing metal-free COFs with high crystallinity for photocatalytic overall water splitting.

Overcoming small-bandgap charge recombination in visible and NIR-light-driven hydrogen evolution by engineering the polymer photocatalyst structure

Designing an organic polymer photocatalyst for efficient hydrogen evolution with visible and near-infrared (NIR) light activity is still a major challenge. Unlike the common behavior of gradually increasing the charge recombination while shrinking the bandgap, we present here a series of polymer nanoparticles (Pdots) based on ITIC and BTIC units with different π-linkers between the acceptor-donor-acceptor (A-D-A) repeated moieties of the polymer. These polymers act as an efficient single polymer photocatalyst for H2 evolution under both visible and NIR light, without combining or hybridizing with other materials. Importantly, the difluorothiophene (ThF) π-linker facilitates the charge transfer between acceptors of different repeated moieties (A-D-A-(π-Linker)-A-D-A), leading to the enhancement of charge separation between D and A. As a result, the PITIC-ThF Pdots exhibit superior hydrogen evolution rates of 279 µmol/h and 20.5 µmol/h with visible (>420 nm) and NIR (>780 nm) light irradiation, respectively. Furthermore, PITIC-ThF Pdots exhibit a promising apparent quantum yield (AQY) at 700 nm (4.76%).

Full-Spectrum Responsive Naphthalimide/Perylene Diimide with a Giant Internal Electric Field for Photocatalytic Overall Water Splitting

The co-assembly naphthalimide/perylene diimide (NDINH/PDINH) supramolecular photocatalysts were successfully synthesized via a rapid solution dispersion method. A giant internal electric field (IEF) in co-assembly structure was built by the larger local dipole. NDINH coated on PDINH could reduce the reflected electric field over PDINH to improve its responsive activity to ultraviolet light. Resultantly, an efficient full-spectrum photocatalytic overall water splitting activity with H2 and O2 evolution rate of 317.2 and 154.8 μmol g-1  h-1 for NDINH/PDINH together with optimized O2 evolution rate with 2.61 mmol g-1  h-1 using AgNO3 as a sacrificial reagent were achieved. Meanwhile, its solar-to-hydrogen efficiency was enhanced to 0.13 %. The enhanced photocatalytic activity was primarily attributed to the IEF between NDINH and PDINH, significantly accelerating transfer and separation of photogenerated carriers. Additionally, a direct Z-Scheme pathway of carriers contributed to a high redox potential. The strategy provided a new perspective for the design of supramolecular photocatalysts.

Key Strategies for Enhancing H2 Production in Transition Metal Oxide Based Photocatalysts

Transition metal oxides (TMOs) were one of the first photocatalysts used to produce hydrogen from water using solar energy. Despite the emergence of many other genres of photocatalysts over the years, TMO photocatalysts remain dominant due to their easy synthesis and unique physicochemical properties. Various strategies have been developed to enhance the photocatalytic activity of TMOs, but the solar-to-hydrogen (STH) conversion efficiency of TMO photocatalysts is still very low (<2 %), which is far below the targeted STH of 10 % for commercial viability. This article provides a comprehensive analysis of several widely used strategies, including oxygen defects control, doping, establishing interfacial junctions, and phase-facet-morphology engineering, that have been adopted to improve TMO photocatalysts. By critically evaluating these strategies and providing a roadmap for future research directions, this article serves as a valuable resource for researchers, students, and professionals seeking to develop efficient energy materials for green energy solutions.

Novel Triangulenes: Computational Investigations of Energy Thresholds for Photocatalytic Water Splitting

Organic materials with Inverted Singlet-Triplet (INVEST) gaps are interesting for their potential use in photocatalytic small molecule transformations such as the entirely solar-driven water splitting reaction. However, only a few INVEST emitters are thermodynamically able to split water requiring a first singlet excited dark state, S1 , above 1.27 or 1.76 eV, and absorption near solar the maximum, 2.57 eV. These requirements and the INVEST character are key for achieving a long-lived photocatalyst for water splitting. The only known INVEST emitters that conform to these criteria are large triangular boron carbon nitrides with unknown synthesis pathways. Using ADC(2), a quantum-mechanical method, we describe three triangulenes. 3 a is a cyano azacyclopenta[cd]phenalene derivative while 3 b and 3 c are cycl[3.3.3]azine derivatives. 3 b has a previously undescribed disulfide bridge. Overall, 3 a fulfills requirements for photocatalytic four-electron reduction of water while the S1 states of 3 b and 3 c are likely slightly low for the two-electron reduction process. By analyzing impacts of ligands, we find that there are guidelines describing how S1 -S5 energies and oscillator strengths, T1 energies, and ΔES1T1 gaps are affected, requiring deep-learning algorithms for which studies will be presented by us in due time. The impact of ground-state geometries, solvation effects, as well as reduced-cost ADC(2) algorithms on our findings are also discussed.

In Situ Synthesis of Chemically Bonded 2D/2D Covalent Organic Frameworks/O-Vacancy WO3 Z-Scheme Heterostructure for Photocatalytic Overall Water Splitting

Covalent organic frameworks (COFs) have shown great promise for photocatalytic hydrogen evolution via water splitting. However, the four-electron oxidation of water remains elusive toward oxygen evolution. Enabling this water oxidation pathway is critical to improve the yield and maximize atom utilization efficiency. A Z-scheme heterojunction is proposed for overcoming fundamental issues in COF-based photocatalytic overall water splitting (OWS), such as inefficient light absorption, charge recombination, and poor water oxidation ability. It is shown that the construction of a novel 2D/2D Z-scheme heterojunction through in situ growth of COFs on the O-vacancy WO3 nanosheets (Ov-WO3 ) via the WOC chemical bond can remarkably promote photocatalytic OWS. Benefiting from the synergistic effect between the enhanced built-in electric field by the interfacial WOC bond, the strong water oxidation ability of Ov-WO3, and the ultrathin structure of TSCOF, both separation and utilization efficiency of photogenerated electron-hole pairs can be significantly enhanced. An impressive photocatalytic hydrogen evolution half-rection rate of 593 mmol h-1 g-1 and overall water splitting rate of 146 (hydrogen) and 68 (oxygen) µmol h-1  g-1 are achieved on the COF-WO3 (TSCOFW) composite. This 2D/2D Z-scheme heterojunction with two-step excitation and precisely cascaded charge-transfer pathway makes it responsible for the efficient solar-driven OWS without a sacrificial agent.

Efficient photocatalytic hydrogen evolution: Linkage units engineering in triazine-based conjugated porous polymers

Conjugated porous polymers (CPPs) have been widely reported as promising photocatalysts. However, the realization of powerful photocatalytic hydrogen production performance still benefits from the rational design of molecular frameworks and the appropriate choice of building monomers. Herein, we synthesized two novel conjugated porous polymers (CPPs) by copolymerizing pyrene and 1,3,5-triazine building blocks. It is found that minor structural changes in the peripheral groups of the triazine units can greatly affect the photocatalytic activity of the polymers. Compared with the phenyl-linkage unit, the thiophene-linkage unit can give CPP a wider absorption range of visible light, a narrower band gap, a higher transmission and separation efficiency of photo-generated carriers (electrons/holes), and a better interface contact with the photocatalytic reaction solution. The catalyst containing thiophene-triazine (ThPy-CPP) has an efficient photocatalytic hydrogen evolution rate of 21.65 and 16.69 mmol g^-1h^-1 under full-arc spectrum and visible light without the addition of a Pt co-catalyst, respectively, much better than the one containing phenyl-triazine (PhPy-CPP, only 5.73 and 3.48 mmol g^-1h^-1). This study provides a promising direction to design and construct highly efficient, cost-effective CPP-based photocatalysts, for exploring the application of noble metal-free catalysts in photocatalytic hydrogen evolution.

π-Electron-Extended Triazine-Based Covalent Organic Framework as Photocatalyst for Organic Pollution Degradation and H2 Production from Water

Herein, we report the efficient preparation of π-electron-extended triazine-based covalent organic framework (TFP-TPTPh COF) for photocatalysis and adsorption of the rhodamine B (RhB) dye molecule, as well as for photocatalytic hydrogen generation from water. The resultant TFP-TPTPh COF exhibited remarkable porosity, excellent crystallinity, high surface area of 724 m2 g−1, and massive thermal stability with a char yield of 63.41%. The TFP-TPTPh COF demonstrated an excellent removal efficiency of RhB from water in 60 min when used as an adsorbent, and its maximum adsorption capacity (Qm) of 480 mg g−1 is among the highest Qm values for porous polymers ever to be recorded. In addition, the TFP-TPTPh COF showed a remarkable photocatalytic degradation of RhB dye molecules with a reaction rate constant of 4.1 × 10−2 min−1 and an efficiency of 97.02% under ultraviolet–visible light irradiation. Furthermore, without additional co-catalysts, the TFP-TPTPh COF displayed an excellent photocatalytic capacity for reducing water to generate H2 with a hydrogen evolution rate (HER) of 2712 μmol g−1 h−1. This highly active COF-based photocatalyst appears to be a useful material for dye removal from water, as well as solar energy processing and conversion.

Strong synergy between gold nanoparticles and cobalt porphyrin induces highly efficient photocatalytic hydrogen evolution

The reaction efficiency of reactants near plasmonic nanostructures can be enhanced significantly because of plasmonic effects. Herein, we propose that the catalytic activity of molecular catalysts near plasmonic nanostructures may also be enhanced dramatically. Based on this proposal, we develop a highly efficient and stable photocatalytic system for the hydrogen evolution reaction (HER) by compositing a molecular catalyst of cobalt porphyrin together with plasmonic gold nanoparticles, around which plasmonic effects of localized electromagnetic field, local heating, and enhanced hot carrier excitation exist. After optimization, the HER rate and turn-over frequency (TOF) reach 3.21 mol g^-1 h^-1 and 4650 h^-1, respectively. In addition, the catalytic system remains stable after 45-hour catalytic cycles, and the system is catalytically stable after being illuminated for two weeks. The enhanced reaction efficiency is attributed to the excitation of localized surface plasmon resonance, particularly plasmon-generated hot carriers. These findings may pave a new and convenient way for developing plasmon-based photocatalysts with high efficiency and stability.

Synergistic Contribution of Oligo(ethylene glycol) and Fluorine Substitution of Conjugated Polymer Photocatalysts toward Solar Driven Sacrificial Hydrogen Evolution

To separately explore the importance of hydrophilicity and backbone planarity of polymer photocatalyst, a series of benzothiadiazole-based donor-acceptor alternating copolymers incorporating alkoxy, linear oligo(ethylene glycol) (OEG) side chain, and backbone fluorine substituents is presented. The OEG side chains in the polymer backbone increase the surface energy of the polymer nanoparticles, thereby improving the interaction with water and facilitating electron transfer to water. Moreover, the OEG-attached copolymers exhibit enhanced intermolecular packing compared to polymers with alkoxy side chains, which is possibly attributed to the self-assembly properties of the side chains. Fluorine substituents on the polymer backbone produce highly ordered lamellar stacks with distinct π-π stacking features; subsequently, the long-lived polarons toward hydrogen evolution are observed by transient absorption spectroscopy. In addition, a new nanoparticle synthesis strategy using a methanol/water mixed solvent is first adopted, thereby avoiding the screening effect of surfactants between the nanoparticles and water. Finally, hydrogen evolution rate of 26 000 µmol g^-1  h^-1 is obtained for the copolymer incorporated with both OEG side chains and fluorine substituents under visible-light irradiation (λ > 420 nm). This study demonstrates how the glycol side chain strategy can be further optimized for polymer photocatalysts by controlling the backbone planarity.

Mesoporous Carbon Nitride with π-Electron-Rich Domains and Polarizable Hydroxyls Fabricated via Solution Thermal Shock for Visible-Light Photocatalysis

Carbon nitride semiconductors are competitive candidates for visible-light-responsive photocatalysts, but encounter weakened exciton dissociation arising from the elevated Coulomb force of singlet Frenkel excitons with narrowing bandgaps. We overcome this contradiction by co-infusing π-electron-rich domains and polarizable hydroxyl units into mesoporous carbon nitride, realized by solution thermal shock. The embedded delocalized π-conjugated aromatic domains derived from nonconjugated macromolecules downshift the conduction band edge and contribute to spatial separation of photogenerated electrons in the lowest unoccupied molecular orbital and holes in the highest occupied molecular orbital. Meanwhile, polarizable hydroxyls induce distinct electron flow from heptazine-based skeletons to periphery sites and enhance water adsorption as well as proton reduction capacity. Consequently, the polymeric carbon nitride delivers an enhanced hydrogen evolution rate that is 17.5 times larger than thermally treated counterparts derived from urea fabricated via conventional strategies. These results show that our strategy can infuse different functional motifs into carbon nitride and thus improve photocatalytic activity.

Metal-Organic Frameworks as Photocatalysts for Solar-Driven Overall Water Splitting

Metal-organic frameworks (MOFs) have been frequently used as photocatalysts for the hydrogen evolution reaction (HER) using sacrificial agents with UV-vis or visible light irradiation. The aim of the present review is to summarize the use of MOFs as solar-driven photocatalysts targeting to overcome the current efficiency limitations in overall water splitting (OWS). Initially, the fundamentals of the photocatalytic OWS under solar irradiation are presented. Then, the different strategies that can be implemented on MOFs to adapt them for solar photocatalysis for OWS are discussed in detail. Later, the most active MOFs reported until now for the solar-driven HER and/or oxygen evolution reaction (OER) are critically commented. These studies are taken as precedents for the discussion of the existing studies on the use of MOFs as photocatalysts for the OWS under visible or sunlight irradiation. The requirements to be met to use MOFs at large scale for the solar-driven OWS are also discussed. The last section of this review provides a summary of the current state of the field and comments on future prospects that could bring MOFs closer to commercial application.

Impact of Interfaces, and Nanostructure on the Performance of Conjugated Polymer Photocatalysts for Hydrogen Production from Water

The direct conversion of sunlight into hydrogen through water splitting, and by converting carbon dioxide into useful chemical building blocks and fuels, has been an active area of research since early reports in the 1970s. Most of the semiconductors that drive these photocatalytic processes have been inorganic semiconductors, but since the first report of carbon nitride organic semiconductors have also been considered. Conjugated materials have been relatively extensively studied as photocatalysts for solar fuels generation over the last 5 years due to the synthetic control over composition and properties. The understanding of materials' properties, its impact on performance and underlying factors is still in its infancy. Here, we focus on the impact of interfaces, and nanostructure on fundamental processes which significantly contribute to performance in these organic photocatalysts. In particular, we focus on presenting explicit examples in understanding the interface of polymer photocatalysts with water and how it affects performance. Wetting has been shown to be a clear factor and we present strategies for increased wettability in conjugated polymer photocatalysts through modifications of the material. Furthermore, the limited exciton diffusion length in organic polymers has also been identified to affect the performance of these materials. Addressing this, we also discuss how increased internal and external surface areas increase the activity of organic polymer photocatalysts for hydrogen production from water.

Two-Dimensional Covalent Heptazine-Based Framework Enables Highly Photocatalytic Performance for Overall Water Splitting

Screening high-efficiency 2D conjugated polymers toward visible-light-driven overall water splitting (OWS) is one of the most promising but challenging research directions to realize solar-to-hydrogen (STH) energy conversion and storage. "Mystery molecule" heptazine is an intriguing hydrogen evolution reaction (HER) building block. By covalently linking with the electron-rich alkynyl and phenyl oxygen evolution reaction (OER) active units, 10 experimentally feasible 2D covalent heptazine-based frameworks (CHFs) are constructed and screened four promising visible-light-driven OWS photocatalysts, which are linked by p-phenyl (CHF-4), p-phenylenediynyl (CHF-7), m-phenylenediynyl (CHF-8), and phenyltriynyl (CHF-9), respectively. Their HER and OER active sites achieve completely spatially separated, where HER active sites focus on heptazine units and OER active sites located on alkynyl or phenyl units. Their lower overpotentials allow them to spontaneously trigger the surface OWS reaction under their own light-induced bias without using any sacrificial agents and cocatalysts. Among them, CHF-7 shows the best photocatalytic performance with an ideal STH energy conversion efficiency estimated at 12.04%, indicating that it is a promising photocatalyst for industrial OWS. This work not only provides an innovative idea for the exploration of novel polymer photocatalysts for OWS but also supplies a direction for the development of heptazine derivatives.

Photocatalytic Water Splitting Promoted by 2D and 3D Porphyrin Covalent Organic Polymers Synthesized by Suzuki-Miyaura Carbon-Carbon Coupling

This work deals with the synthesis of metal-free and porphyrin-based covalent organic polymers (COPs) by the Suzuki-Miyaura coupling carbon-carbon bond forming reaction to study the photocatalytic overall water splitting performance. Apart from using 5,10,15,20-Tetrakis-(4-bromophenyl)porphyrin, we have chosen different cross-linker monomers to induce 2-dimensional (2D) or 3-dimensional (3D) and different rigidity in their resulting polymeric molecular structure. The synthesised COPs were extensively characterised to reveal that the dimensionality and flexibility of the molecular structure play an intense role in the physical, photochemical, and electronic properties of the polymers. Photoinduced excited state of the COPs was evaluated by nanosecond time-resolved laser transient absorption spectroscopy (TAS) by analysing excited state kinetics and quenching experiments, photocurrent density measurements and photocatalytic deposition of Ru³⁺ to RuO_2, and photocatalysis. In summary, TAS experiments demonstrated that the transient excited state of these polymers has two decay kinetics and exhibit strong interaction with water molecules. Moreover, photocurrent and photocatalytic deposition experiments proved that charges are photoinduced and are found across the COP molecular network, but more important charges can migrate from the surface of the COP to the medium. Among the various COPs tested, COP-3 that has a flexible and 3D molecular structure reached the best photocatalytic performances, achieving a photocatalytic yield of 0.4 mmol H₂ × g_COP-3^-1 after 3 h irradiation.

Covalent Triazine Frameworks with Defective Accumulation Sites: Exceptionally Modulated Electronic Structure for Solar-Driven Oxidative Activation of Peroxymonosulfate

Precisely tailoring the electronic structure and surface chemistry of metal-free covalent triazine frameworks (CTFs) for efficient photoactivation of oxyanions is environmentally desirable but still challenging. Of interest to us in this work was to construct artificial defective accumulation sites into a CTF network (CTF-SD_x) to synchronously modulate both thermodynamic (e.g., band structure) and kinetic (e.g., charge separation/transfer/utilization and surface adsorption) behaviors and probe how the transformation affected the subsequent activation mechanism of peroxymonosulfate (PMS). With the incorporation of terminal cyano (-CN) groups and boron (B) dopants, the delocalized CTF-SD underwent a narrowed electronic energy gap for increased optical absorption as well as a downshifted valence band position for enhanced oxidation capacity. Moreover, the localized charge accumulation regions induced by the electron-withdrawing -CN groups facilitated the exciton dissociation process, while the adjacent electron-deficient areas enabled strong affinity toward PMS molecules. All of these merits impelled the photoactivation reaction with PMS, and a 15-fold enhancement of bisphenol-A (BPA) removal was found in the CTF-SD₂/PMS/vis system compared with the corresponding pristine CTF system. Mechanistic investigations demonstrated that this system decomposed organics primarily through a singlet oxygen-mediated nonradical process, which originated from PMS oxidative activation over photoinduced holes initiated by an electron transfer process, thereby opening a new avenue for designing an efficient PMS activation strategy for the selective oxidation of organic pollutants.

Boosting sluggish photocatalytic hydrogen evolution through piezo-stimulated polarization: a critical review

To address the growing energy demand, remarkable progress has been made in transferring the fossil fuel-based economy to hydrogen-based environmentally friendly photocatalytic technology. However, the sluggish production rate due to the quick charge recombination and slow diffusion process needs careful engineering to achieve the benchmark photocatalytic efficiency. Piezoelectric photocatalysis has emerged as a promising field in recent years due to its improved catalytic performance facilitated by a built-in electric field that promotes the effective separation of excitons when subjected to mechanical stimuli. This review discusses the recent progress in piezo-photocatalytic hydrogen evolution while elaborating on the mechanistic pathway, effect of piezo-polarization and various strategies adopted to improve piezo-photocatalytic activity. Moreover, our review systematically emphasizes the fundamentals of piezoelectricity and piezo-phototronics along with the operational mechanism for designing efficient piezoelectric photocatalysts. Finally, the summary and outlooks provide insight into the existing challenges and outline the future prospects and roadmap for the development of next-generation piezo-photocatalysts towards hydrogen evolution.

Covalent organic frameworks with high quantum efficiency in sacrificial photocatalytic hydrogen evolution

Organic semiconductors offer a tunable platform for photocatalysis, yet the more difficult exciton dissociation, compared to that in inorganic semiconductors, lowers their photocatalytic activities. In this work, we report that the charge carrier lifetime is dramatically prolonged by incorporating a suitable donor-acceptor (β-ketene-cyano) pair into a covalent organic framework nanosheet. These nanosheets show an apparent quantum efficiency up to 82.6% at 450 nm using platinum as co-catalyst for photocatalytic H₂ evolution. Charge carrier kinetic analysis and femtosecond transient absorption spectroscopy characterizations verify that these modified covalent organic framework nanosheets have intrinsically lower exciton binding energies and longer-lived charge carriers than the corresponding nanosheets without the donor-acceptor unit. This work provides a model for gaining insight into the nature of short-lived active species in polymeric organic photocatalysts.

Molecular Design of Covalent Triazine Frameworks with Anisotropic Charge Migration for Photocatalytic Hydrogen Production

Covalent triazine frameworks (CTFs) represent promising polymeric photocatalysts for photocatalytic hydrogen production with visible light. However, the separation and transfer of charges in CTFs are isotropic because of the uniform distribution of donor-acceptor motifs in the skeleton. Herein, to achieve the anisotropic charge carrier separation and migration, thiophene (Th) or benzothiadiazole (BT) unit is selected as the dopant to modify the molecular structure of CTF-based photocatalysts. Both theoretical and experimental studies reveal that the incorporation of Th or BT units induces the anisotropic charge carrier separation and migration at the interface of CTFs. The optimized polymer manifests a much enhanced photocatalytic activity for photocatalytic hydrogen production with visible light, and thus this study provides a useful tool to design conjugated polymer photocatalysts at the molecular level for solar energy conversion.

Hole utilization in solar hydrogen production

In photochemical production of hydrogen from water, the hole-mediated oxidation reaction is the rate-determining step. A poor solar-to-hydrogen efficiency is usually related to a mismatch between the internal quantum efficiency of photon-induced hole generation and the apparent quantum yield of hydrogen. This waste of photogenerated holes is unwanted yet unavoidable. Although great progress has been made, we are still far away from the required level of dexterity to deal with the associated challenges of wasted holes and its consequential chemical effects that have placed one of the greatest bottlenecks in attaining high solar-to-hydrogen efficiency. A critical assessment of the hole and its related phenomena in solar hydrogen production would, therefore, pave the way moving forward. In this regard, we focus on the contextual and conceptual understanding of the dynamics and kinetics of photogenerated holes and its critical role in driving redox reactions, with the objective of guiding future research. The main reasons behind and consequences of unused holes are examined and different approaches to improve overall efficiency are outlined. We also highlight yet unsolved research questions related to holes in solar fuel production.

Rational Design of Covalent Heptazine Frameworks with Spatially Separated Redox Centers for High-Efficiency Photocatalytic Hydrogen Peroxide Production

The redox reaction centers in natural organisms conducting oxygenic photosynthesis are well arranged in a physically separated manner to convert sunlight into chemical energy efficiently. Mimicking natural photosynthesis via precisely constructing oxidative and reductive reaction centers within photocatalysts is ideal for enhancing catalytic performances in artificial photosynthesis. In this study, new covalent heptazine frameworks (CHFs) with spatially separated redox centers are rationally designed for photocatalytic production of H₂ O₂ from water and oxygen without using any sacrificial agents. Both experimental and computational investigations indicate that the two-electron oxygen reduction reaction occurs on the heptazine moiety, whereas the two-electron water oxidation reaction occurs on the acetylene or diacetylene bond in the CHFs. This unique spatial separation feature is critical for enhancing charge separation and achieving efficient H₂ O₂ production. Meanwhile, the measured exciton binding energy of the diacetylene-containing polymer is merely 24 meV. Under simulated solar irradiation, the rationally designed CHFs can achieve a solar-to-chemical conversion efficiency of 0.78%, surpassing previously reported photocatalytic materials. This study establishes a molecular engineering approach to construct periodically arranged and spatially separated redox centers in single-component polymer photocatalysts, representing a hallmark to create more exciting polymer structures for photocatalysis moving forward.

Strategies to Improve Photodynamic Therapy Efficacy of Metal-Free Semiconducting Conjugated Polymers

Photodynamic therapy (PDT) is a noninvasive therapy for cancer and bacterial infection. Metal-free semiconducting conjugated polymers (SCPS) with good stability and optical and electrical properties are promising photosensitizers (PSs) for PDT compared with traditional small-molecule PSs. This review analyzes the latest progress of strategies to improve PDT effect of linear, planar, and three-dimensional SCPS, including improving solubility, adjusting conjugated structure, enhancing PS-doped SCPs, and combining therapies. Moreover, the current issues, such as hypoxia, low penetration, targeting and biosafety of SCPS, and corresponding strategies, are discussed. Furthermore, the challenges and potential opportunities on further improvement of PDT for SCPs are presented.

Preparation, characterization, evaluation and mechanistic study of organic polymer nano-photocatalysts for solar fuel production

This review provides the guidelines and knowledge gained so far on current strategies used to prepare, optimize and investigate polymer nanoparticles for fuel production, highlighting the future directions of polymer nano-photocatalyst development.

Insight into the role of reduced graphene oxide for enhancing photocatalytic hydrogen evolution in disordered carbon nitride

Compared to crystalline carbon nitride, the performance of disordered carbon nitride (d-CN) as a hydrogen production photocatalyst is extremely poor. Owing to disordered atomic orientation, it is prone to numerous...

Two-Dimensional-Polycyclic Photovoltaic Molecule with Low Trap Density for High-Performance Photocatalytic Hydrogen Evolution

Typical organic semiconductors show a high trap density of states (1016-1018 cm-3), providing a large number of centers for charge-carrier recombination, thus hindering the development of photocatalytic hydrogen evolution. Here, we introduce a strategy of designing and synthesizing two-dimensional-polycyclic photovoltaic material, named as TPP, to reduce the trap density as low as 2.3×1015 cm-3, which is 1-3 orders of magnitudes lower than those of typical organic photovoltaic semiconductors. Moreover, TPP exhibited broad and strong absorption, ordered molecular packing with large crystalline coherence length and enhanced electron mobility. Then, the bulk heterojunction nanoparticles (BHJ-NPs) based on the blend of polymer donor (PM6) and TPP, exhibited an average hydrogen evolution rate (HER) of 72.75 mmol h-1 g-1, which is higher than that of the control NPs based on typical PM6:Y6 (62.67 mmol h-1 g-1) tested under 330-1100 nm illumination with light intensity of 198 mW cm-2.

Photo-induced synthesis of ternary Pt/rGO/COF photocatalyst with Pt nanoparticles precisely anchored on rGO for efficient visible-light-driven H2 evolution

Covalent organic frameworks (COFs) have been recognized as a new type of promising visible-light-driven photocatalysts for H₂ evolution, while it still is a key point to facilitate the separation and transfer of photoinduced charges for further enhancing their activities. In this work, we fabricated a new type of ternary Pt/rGO/COF photocatalysts with Pt cocatalyst precisely anchored on rGO serving as electron collector for largely enhanced H₂ evolution. A series of ternary hybrid materials were obtained via one-pot photoreduction of Pt⁴⁺ and GO under visible-light irradiation in a solution the same as photocatalytic H₂ evolution reaction and simultaneous self-assembling of rGO/COF heterostructure. No need isolation, the synthetic system could be further used for photocatalytic H₂ evolution reaction and the results show the H₂ evolution rate of Pt/rGO(20%)/TpPa-1-COF hybrid material is 19.59 mmol·g^-1·h^-1, 6.51 times higher than that of Pt/TpPa-1-COF. The essential role of the exclusively distributed Pt nanoparticles on rGO to the high H₂ evolution activity was confirmed by various comparisons of activity for the samples with diverse Pt distribution.

Review on application of perylene diimide (PDI)-based materials in environment: Pollutant detection and degradation

Environment pollution is getting serious and various poisonous contaminants with chemical durability, biotoxicity and bioaccumulation have been widespreadly discovered in municipal wastewaters and surface water. The detection and removal of pollutants show great significance for the protection of human health and other organisms. Due to its distinctive physical and chemical properties, perylene diimide (PDI) has received widespread attention from different research fields, especially in the area of environment. In this review, a comprehensive summary of the development of PDI-based materials in fluorescence detection and advanced oxidation technology for environment was introduced. Firstly, we chiefly presented the recent progress about the synthesis of PDI and PDI-based nanomaterials. Then, their application in fluorescence detection for environment was presented and categorized, principally including the detection of heavy metal ions, harmful anions and organic contaminants in the environment. In addition, the application of PDI and PDI-based materials in different advanced oxidation technologies for environment, such as photocatalysis, photoelectrocatalysis, Fenton and Fenton-like reaction and persulfate activation, was also summarized. At last, the challenges and future prospects of PDI-based materials in environmental applications were discussed. This review focuses on presenting the practical applications of PDI and PDI-based materials as fluorescent probes or catalysts (especially photocatalysts) in the detection of hazardous substances or catalytic elimination of organic contaminants. The contents are aimed at supplying the researchers with a deeper understanding of PDI and PDI-based materials and encouraging their further development in environmental applications.

Boosting the Photocatalytic Hydrogen Evolution Activity for D-π-A Conjugated Microporous Polymers by Statistical Copolymerization

Recently, great progress has been achieved in the design and preparation of conjugated organic polymer photocatalysts for hydrogen generation. However, it is still challenging to develop an organic polymer photocatalyst with high photoconversion efficiency. Rational structure design of organic polymer photocatalysts holds the key point to realize high photocatalytic performance. Herein, a series of donor-π-acceptor (D-π-A) conjugated organic copolymer photocatalysts is developed using statistical copolymerization by tuning the feed molar ratio of pyrene (donor) to dibenzothiophene-S,S-dioxide (acceptor) units. It reveals that the photocatalytic activity of the resulting copolymers is significantly dependent on the molar ratio of donor to acceptor, which efficiently changes the polymer structure and component. When the monomer feed ratio is 25:75, the random copolymer PyBS-3 of 10 mg with Pt cocatalyst shows a high hydrogen evolution rate of 1.05 mmol h^-1 under UV/Vis light irradiation using ascorbic acid as the hole-scavenger, and an external quantum efficiency of 29.3% at 420 nm, which represents the state-of-the-art of organic polymer photocatalysts. This work demonstrates that statistical copolymerization is an efficient strategy to optimize the polymer structure for improving the photocatalytic activity of conjugated organic polymer catalysts.

Probing Dynamics of Water Mass Transfer in Organic Porous Photocatalyst Water-Splitting Materials by Neutron Spectroscopy

The quest for efficient and economically accessible cleaner methods to develop sustainable carbon-free energy sources induced a keen interest in the production of hydrogen fuel. This can be achieved via the water-splitting process and by exploiting solar energy. However, the use of adequate photocatalysts is required to reach this goal. Covalent triazine-based frameworks (CTFs) are potential target photocatalysts for water splitting. Both electronic and structural characteristics of CTFs, particularly energy levels, optical band gaps, and porosities are directly relevant to water splitting and can be engineered through chemical design. Porosity can, in principle, be beneficial to water splitting by providing a larger surface area for the catalytic reactions to take place. However, porosity can also affect both charge transport within the photocatalyst and mass transfer of both reactants and products, thus impacting the overall kinetics of the reaction. Here, we focus on the link between chemical design and water (reactant) mass transfer, which plays a key role in the water uptake process and the subsequent hydrogen generation in practice. We use neutron spectroscopy to study the mass transfer of water in two porous CTFs, CTF-CN and CTF-2, that differ in the polarity of their struts. Quasi-elastic neutron scattering is used to quantify the amount of bound water and the translational diffusion of water. Inelastic neutron scattering measurements complement the quasi-elastic neutron scattering study and provide insights into the softness of the CTF structures and the changes in librational degrees of freedom of water in the porous CTFs. We show that two different types of interaction between water and CTFs take place in CTF-CN and CTF-2. CTF-CN exhibits a smaller surface area and lower water uptake due to its softer structure than CTF-2. However, the polar cyano group interacts locally with water leading to a large amount of bound water and a strong rearrangement of the water hydration monolayer, while water diffusion in CTF-2 is principally impacted by microporosity. The current study leads to new insights into the structure-dynamics-property relationship of CTF photocatalysts that pave the road for a better understanding of the guest-host interaction on the basis of water-splitting applications.