Cellular AND Gates: Synergistic Recognition to Boost Selective Uptake of Polymeric Nanoassemblies

Cascade In Situ Self-Assembly and Bioorthogonal Reaction Enable the Enrichment of Photosensitizers and Carbonic Anhydrase Inhibitors for Pretargeted Cancer Theranostics

We report here a tumor-pretargted theranostic approach for multimodality imaging-guided synergistic cancer PDT by cascade alkaline phosphatase (ALP)-mediated in situ self-assembly and bioorthogonal inverse electron demand Diels-Alder (IEDDA) reaction. Using the enzymatic catalysis of ALP that continuously catalyses the dephosphorylation and self-assembly of trans-cyclooctene (TCO)-bearing P-FFGd-TCO, a high density of fluorescent and magnetic TCO-containing nanoparticles (FMNPs-TCO) can be synthesized and retained on the membrane of tumor cells. They can act as 'artificial antigens' amenable to concurrently capture lately administrated tetrazine (Tz)-decorated PS (775NP-Tz) and carbonic anhydrase (CA) inhibitor (SA-Tz) via the fast IEDDA reaction. This two-step pretargeting process can further induce FMNPs-TCO regrowth into microparticles (FMNPs-775/SA) directly on tumor cell membranes, which is analyzed by bio-SEM and fluorescence imaging. Thus, efficient enrichment of both SA-Tz and 775NP-Tz in tumors can be achieved, allowing to alleviate hypoxia by continuously inhibiting CA activity and improving PDT of tumors. Findings show that subcutaneous HeLa tumors could be completely eradicated and no tumor recurred after irradiation with an 808 nm laser (0.33 W cm-2 , 10 min). This pretargeted approach may be applied to enrich other therapeutic agents in tumors to improve targeted therapy.

Functionalized DNA nanoplatform for multi-target simultaneous imaging: Establish the atlas of cancer cell species

Detection and imaging of cell membrane receptor proteins have gained widespread interest in recent years. However, recognition based on a single biomarker can induce false positive feedback, including off-target phenomenon caused by the absence of tumor-specific antigens. In addition, nucleic acid probes often cause nonspecific and undesired cell internalization during cell imaging. In this work, we constructed a logic gate DNA nano-platform (LGDP) for single-molecule imaging of cell membrane proteins to synergistically diagnose cancer cells. The traffic light-like color response of LGDP facilitates the precise discrimination among different cell lines. Combined with single molecule technology, the target proteins were qualitatively and quantitatively analyzed synergistically. Logic-gated recognition integrated in aptamer-functionalized molecular machines will prompt fast cells analysis, laying the foundation of cancer early diagnosis and treatment.

Optimizing Conjugation Chemistry, Antibody Conjugation Site, and Surface Density in Antibody-Nanogel Conjugates (ANCs) for Cell-Specific Drug Delivery

Targeted delivery of therapeutics using antibody-nanogel conjugates (ANCs) with a high drug-to-antibody ratio has the potential to overcome some of the inherent limitations of antibody-drug conjugates (ADCs). ANC platforms with simple preparation methods and precise tunability to evaluate structure-activity relationships will greatly contribute to translating this promise into clinical reality. In this work, using trastuzumab as a model antibody, we demonstrate a block copolymer-based ANC platform that allows highly efficient antibody conjugation and formulation. In addition to showcasing the advantages of using an inverse electron-demand Diels-Alder (iEDDA)-based antibody conjugation, we evaluate the influence of antibody surface density and conjugation site on the nanogels upon the targeting capability of ANCs. We show that compared to traditional strain-promoted alkyne-azide cycloadditions, the preparation of ANCs using iEDDA provides significantly higher efficiency, which results in a shortened reaction time, simplified purification process, and enhanced targeting toward cancer cells. We also find that a site-specific disulfide-rebridging method in antibodies offers similar targeting abilities as the more indiscriminate lysine-based conjugation method. The more efficient bioconjugation using iEDDA allows us to optimize the avidity by fine-tuning the surface density of antibodies on the nanogel. Finally, with trastuzumab-mertansine (DM1) antibody-drug combination, our ANC demonstrates superior activities in vitro compared to the corresponding ADC, further highlighting the potential of ANCs in future clinical translation.

Targeted Drug Delivery Using a Plug-to-Direct Antibody-Nanogel Conjugate

Targeted drug delivery using antibody-drug conjugates has attracted great attention due to its enhanced therapeutic efficacy compared to traditional chemotherapy. However, the development has been limited due to a low drug-to-antibody ratio and laborious linker-payload optimization. Herein, we present a simple and efficient strategy to combine the favorable features of polymeric nanocarriers with antibodies to generate an antibody-nanogel conjugate (ANC) platform for targeted delivery of cytotoxic agents. Our nanogels stably encapsulate several chemotherapeutic agents with a wide range of mechanisms of action and solubility. We showcase the targetability of ANCs and their selective killing of cancer cells over-expressing disease-relevant antigens such as human epidermal growth factor receptor 2, epidermal growth factor receptor, and tumor-specific mucin 1, which cover a broad range of breast cancer cell types while maintaining low to no toxicity to non-targeted cells. Overall, our system represents a versatile approach that could impact next-generation nanomedicine in antibody-targeted therapeutics.

Regulating the Membrane Affinity of Multi-module Probes to Address the Trade-off between Anchoring and Internalization

Cell membrane transport is the first and crucial step for bioprobes to realize the diagnosis, imaging, and therapy in cells. However, during this transport, there is a trade-off between anchoring and internalization steps, which will seriously affect the membrane transport efficiency. In the past, because the interaction between probes and cell membrane is constant, this challenge is hard to solve. Here, we proposed a strategy to regulate the membrane affinity of multi-module probes that enabled probe to have strong affinity during cell membrane anchoring and weak affinity during internalization. Specifically, a multi-module probe defined as LK-M-NA was constructed, which consisted of three main parts, membrane-anchoring α-helix peptide (LK), anchoring regulator (M), and therapeutic module (NA). With the α-helix module, LK-M-NA was able to rapidly anchor on the cell membrane and the binding energy was -1450.90 kcal/mol. However, after pericellular cleavage by the highly active matrix metalloproteinase-2 , LK could be removed due to the breakage of M and the binding energy reduced to -869.95 kcal/mol. Thus, the internalization restriction caused by high affinity was relieved. Owing to the alterable affinity, the membrane transport efficiency of LK-M-NA increased to 14.58%, well addressing the trade-off problem.

Localized Controlled Release of Kynurenic Acid Encapsulated in Synthetic Polymer Reduces Implant-Induced Dermal Fibrosis

Excessive fibrosis following surgical procedures is a challenging condition with serious consequences and no effective preventive or therapeutic option. Our group has previously shown the anti-fibrotic effect of kynurenic acid (KynA) in vitro and as topical cream formulations or nanofiber dressings in open wounds. Here, we hypothesized that the implantation of a controlled release drug delivery system loaded with KynA in a wound bed can prevent fibrosis in a closed wound. Poly (lactic-co-glycolic acid) (PLGA), and a diblock copolymer, methoxy polyethylene glycol-block-poly (D, L-lactide) (MePEG-b-PDLLA), were used for the fabrication of microspheres which were evaluated for their characteristics, encapsulation efficiency, in vitro release profile, and in vivo efficacy for reduction of fibrosis. The optimized formulation exhibited high encapsulation efficiency (>80%), low initial burst release (~10%), and a delayed, gradual release of KynA. In vivo evaluation of the fabricated microspheres in the PVA model of wound healing revealed that KynA microspheres effectively reduced collagen deposition inside and around PVA sponges and α-smooth muscle actin expression after 66 days. Our results showed that KynA can be efficiently encapsulated in PLGA microspheres and its controlled release in vivo reduces fibrotic tissue formation, suggesting a novel therapeutic option for the prevention or treatment of post-surgical fibrosis.

Multiplexed Analysis of the Cellular Uptake of Polymeric Nanocarriers

Polymeric nanocarriers (PNCs) are versatile drug delivery vehicles capable of delivering a variety of therapeutics. Quantitatively monitoring their uptake in biological systems is essential for realizing their potential as next-generation delivery systems; however, existing quantification strategies are limited due to the challenges of detecting polymeric materials in complex biological samples. Here, we describe a metal-coded mass tagging approach that enables the multiplexed quantification of the PNC uptake in cells using mass spectrometry (MS). In this approach, PNCs are conjugated with ligands that bind strongly to lanthanide ions, allowing the PNCs to be sensitively quantitated by inductively coupled plasma-MS. The metal-coded tags have little effect on the properties or toxicity of the PNCs, making them biocompatible. We demonstrate that the conjugation of different metals to the PNCs enables the multiplexed analysis of cellular uptake of multiple distinct PNCs at the same time. This multiplexing capability should improve the design and optimization of PNCs by minimizing biological variability and reducing analysis time, effort, and cost.

Mixed Polymeric Micelles for Rapamycin Skin Delivery

Facial angiofibromas (FA) are one of the most obvious cutaneous manifestations of tuberous sclerosis complex. Topical rapamycin for angiofibromas has been reported as a promising treatment. Several types of vehicles have been used hitherto, but polymeric micelles and especially those made of d-α-tocopherol polyethylene glycol 1000 succinate (TPGS) seem to have shown better skin bioavailability of rapamycin than the so far commonly used ointments. To better understand the influence of polymeric micelles on the behavior of rapamycin, we explored it through mixed polymeric micelles combining TPGS and poloxamer, evaluating stability and skin bioavailability to define an optimized formulation to effectively treat FA. Our studies have shown that TPGS improves the physicochemical behavior of rapamycin, i.e., its solubility and stability, due to a strong inclusion in micelles, while poloxamer P123 has a more significant influence on skin bioavailability. Accordingly, we formulated mixed-micelle hydrogels containing 0.1% rapamycin, and the optimized formulation was found to be stable for up to 3 months at 2–8 °C. In addition, compared to hydroalcoholic gel formulations, the studied system allows for better biodistribution on human skin.

EGDMA- and TRIM-Based Microparticles Imprinted with 5-Fluorouracil for Prolonged Drug Delivery

Imprinted materials possess designed cavities capable of forming selective interactions with molecules used in the imprinting process. In this work, we report the synthesis of 5-fluorouracil (5-FU)-imprinted microparticles and their application in prolonged drug delivery. The materials were synthesized using either ethylene glycol dimethacrylate (EGDMA) or trimethylolpropane trimethacrylate (TRIM) cross-linkers. For both types of polymers, methacrylic acid was used as a functional monomer, whereas 2-hydroxyethyl methacrylate was applied to increase the final materials’ hydrophilicity. Adsorption isotherms and adsorption kinetics were investigated to characterize the interactions that occur between the materials and 5-FU. The microparticles synthesized using the TRIM cross-linker showed higher adsorption properties towards 5-FU than those with EGDMA. The release kinetics was highly dependent upon the cross-linker and pH of the release medium. The highest cumulative release was obtained for TRIM-based microparticles at pH 7.4. The IC₅₀ values proved that 5-FU-loaded TRIM-based microparticles possess cytotoxic activity against HeLa cell lines similar to pure 5-FU, whereas their toxicity towards normal HDF cell lines was ca. three times lower than for 5-FU.

Influence of Polymer Structure and Architecture on Drug Loading and Redox-Triggered Release

Disulfide cross-linked nanoassemblies have attracted considerable attention as a drug delivery vehicle due to their responsiveness to the natural redox gradient in biology. Fundamentally understanding the factors that influence the drug loading capacity, encapsulation stability, and precise control of the liberation of encapsulated cargo would be profoundly beneficial to redox-responsive materials. Reported herein are block copolymer (BCP)-based self-cross-linked nanogels, which exhibit high drug loading capacity, high encapsulation stability, and controllable release kinetics. BCP nanogels show considerably higher loading capacity and better encapsulation stability than the random copolymer nanogels at micromolar glutathione concentrations. By partially substituting thiol-reactive pyridyl disulfide into the unreactive benzyl or butyl group, we observed opposite effects on the cross-linking process of BCP nanogels. We further studied the redox-responsive cytotoxicity of our drug-encapsulated nanogels in various cancer cell lines.

Development and Evaluation of 2-Amino-7-Fluorophenazine 5,10-Dioxide Polymeric Micelles as Antitumoral Agents for 4T1 Breast Cancer

2-Amino-7-fluorophenazine 5,10-dioxide (FNZ) is a bioreducible prodrug, poorly soluble in water, with potential anticancer activity on hypoxic-tumors. This poor solubility limits its potential applications in clinic. Amphiphilic pristine polymeric micelles (PMs) based on triblock copolymers Pluronic® and Tetronic®, glycosylated derivatives and their mixtures with preformed-liposomes (LPS), were analyzed as strategies to improve the bioavailability of FNZ. FNZ encapsulations were performed and the obtaining nanostructures were characterized using UV-visible spectroscopy (UV-VIS), Transmission Electron Microscopy (TEM) and Dynamic Light Scattering (DLS). The most promising nanoformulations were analyzed for their potential toxicity and pharmacologically, at 20 mg/kg FNZ-doses, in a stage-IV murine metastatic-breast tumor model. The results revealed that the solubility of the encapsulated-FNZ increased up to 14 times and the analysis (UV-VIS, DLS and TEM) confirmed the interaction between vehicles and FNZ. In all the cases appropriate encapsulation efficiencies (greater than 75%), monodisperse nanometric particle sizes (PDI = 0.180-0.335), adequate Z-potentials (-1.59 to -26.4 mV), stabilities and spherical morphologies were obtained. The in vitro profile of FNZ controlled releases corresponded mainly to a kinetic Higuchi model. The in vitro/in vivo biological studies revealed non-toxicity and relevant tumor-weight diminution (up to 61%).

Core Hydrophobicity of Supramolecular Nanoparticles Induces NLRP3 Inflammasome Activation

Designer nanomaterials capable of delivering immunomodulators to specific immune cells have been extensively studied. However, emerging evidence suggests that several of these nanomaterials can nonspecifically activate NLRP3 inflammasomes, an intracellular multiprotein complex controlling various immune cell functions, leading to undesirable effects. To understand what nanoparticle attributes activate inflammasomes, we designed a multiparametric polymer supramolecular nanoparticle system to modulate various surface and core nanoparticle-associated molecular patterns (NAMPs), one at a time. We also investigated several underlying signaling pathways, including lysosomal rupture-cathepsin B maturation and calcium flux-mitochondrial ROS production, to gain mechanistic insights into NAMPs-mediated inflammasome activation. Here, we report that out of the four NAMPs tested, core hydrophobicity strongly activates and positively correlates with the NLRP3 assembly compared to surface charge, core rigidity, and surface hydrophobicity. Moreover, we demonstrate different signaling inclinations and kinetics followed by differential core hydrophobicity patterns with the most hydrophobic ones exhibiting both lysosomal rupture and calcium influx early on. Altogether, this study will help design the next generation of polymeric nanomaterials for specific regulation of inflammasome activation, aiding efficient immunotherapy and vaccine delivery.

Coordinating External and Built-In Triggers for Tunable Degradation of Polymeric Nanoparticles via Cycle Amplification

The selective activation of nanovectors in pathological tissues is of crucial importance to achieve optimized therapeutic outcomes. However, conventional stimuli-responsive nanovectors lack sufficient sensitivity because of the slight difference between pathological and normal tissues. To this end, the development of nanovectors capable of responding to weak pathological stimuli is of increasing interest. Herein, we report the fabrication of amphiphilic polyurethane nanoparticles containing both external and built-in triggers. The activation of external triggers leads to the liberation of highly reactive primary amines, which subsequently activates the built-in triggers with the release of more primary amines in a positive feedback manner, thereby triggering the degradation of micellar nanoparticles in a cycle amplification model. The generality and versatility of the cycle amplification concept have been successfully verified using three different triggers including reductive milieu, light irradiation, and esterase. We demonstrate that these stimuli-responsive nanoparticles show self-propagating degradation performance even in the presence of trace amounts of external stimuli. Moreover, we confirm that the esterase-responsive nanoparticles can discriminate cancer cells from normal ones by amplifying the esterase stimulus that is overexpressed in cancer cells, thereby enabling the selective release of encapsulated payloads and killing cancer cells. This work presents a robust strategy to fabricate stimuli-responsive nanocarriers with highly sensitive property toward external stimuli, showing promising applications in cancer therapy with minimized side effects.

Triggered interactions between nanoparticles and lipid membranes: design principles for gel formation or disruption-and-release

Lipid bilayer vesicles offer exciting possibilities for stimulated response, taking advantage of the membrane's flexibility and impermeability. We show how synergistic interactions between vesicles and polymer-based nanoparticles can be triggered at the nanoscale using UV light. This interaction leads either to adhesion and a membrane-based gel, or to nanoscale wrapping of the particles by the membrane and then vesicle destruction. To map the response, we varied the particle-membrane interactions via their surface charge densities. We found a crossover from adhesion to destruction at a well-defined region in parameter space. We modeled these results by accounting for the electrostatic attraction and the energy of membrane bending. We then synthesized amphiphilic polymers containing a UV-responsive nitrobenzyl moiety that switches its charge, and showed how a trigger predictably led to either a vesicle gel or disruption and release. The results pave the way to a new triggering mechanism and new response modes in soft materials.

Engineering a Second-Order DNA Logic-Gated Nanorobot to Sense and Release on Live Cell Membranes for Multiplexed Diagnosis and Synergistic Therapy

Tumor biomarker-based theranostics have achieved broad interest and success in recent years. However, single biomarker-based recognition can cause false-positive feedback, including the on-target off-tumor phenomenon, in the absence of tumor-specific antigen. Multibiomarker-based recognition molecules often elicit nonspecific and undesired internalization when they bind to "bystander" cells. We report a universal DNA tetrahedral scaffold (DTS) that anchors on the cell membrane to load multiple aptamers and therapeutics for precise and effective theranostics. This DNA logic-gated nanorobot (DLGN) not only facilitates precise discrimination among five cell lines, but also triggers synergistic killing of effector aptamer-tethered synergistic drugs (EASDs) to target cancer cells. Logic-gated recognition integrated into aptamer-functionalized molecular machines will prompt fast tumor profiling, in situ capture and isolation, and safe delivery of precise medicine.

Cellular- and Subcellular-Targeted Delivery Using a Simple All-in-One Polymeric Nanoassembly

Nanocarrier-mediated drug delivery is a promising strategy to maximize the power of chemotherapy and minimize side effects. However, current approaches show insufficient drug-loading capacity and inefficient drug release, and require complex modification processes. Attempts to enhance one of these features often compromise other merits. We describe here a block copolymer assembly system that combines desirable characteristics. The design of self-immolative and crosslinkable hydrophobic moieties offer stable and high encapsulation. Redox-triggerable polymer self-immolation promotes drug release by switching the hydrophobic core into completely hydrophilic chains. The reactive amine handles, presented on their surface, allow "plug to direct" modification with targeting ligands. Functionalized nanoassemblies have been programmed to target specific subcellular compartments. The simplicity, versatility, and efficacy of the system open up possibilities for an all-in-one delivery system.

Enzymatic Noncovalent Synthesis

Enzymatic reactions and noncovalent (i.e., supramolecular) interactions are two fundamental nongenetic attributes of life. Enzymatic noncovalent synthesis (ENS) refers to a process where enzymatic reactions control intermolecular noncovalent interactions for spatial organization of higher-order molecular assemblies that exhibit emergent properties and functions. Like enzymatic covalent synthesis (ECS), in which an enzyme catalyzes the formation of covalent bonds to generate individual molecules, ENS is a unifying theme for understanding the functions, morphologies, and locations of molecular ensembles in cellular environments. This review intends to provide a summary of the works of ENS within the past decade and emphasize ENS for functions. After comparing ECS and ENS, we describe a few representative examples where nature uses ENS, as a rule of life, to create the ensembles of biomacromolecules for emergent properties/functions in a myriad of cellular processes. Then, we focus on ENS of man-made (synthetic) molecules in cell-free conditions, classified by the types of enzymes. After that, we introduce the exploration of ENS of man-made molecules in the context of cells by discussing intercellular, peri/intracellular, and subcellular ENS for cell morphogenesis, molecular imaging, cancer therapy, and other applications. Finally, we provide a perspective on the promises of ENS for developing molecular assemblies/processes for functions. This review aims to be an updated introduction for researchers who are interested in exploring noncovalent synthesis for developing molecular science and technologies to address societal needs.

An Azobenzene-Based Single-Component Supramolecular Polymer Responsive to Multiple Stimuli in Water

One of the most appealing features of supramolecular assemblies is their ability to respond to external stimuli due to their noncovalent nature. This provides the opportunity to gain control over their size, morphology, and chemical properties and is key toward some of their applications. However, the design of supramolecular systems able to respond to multiple stimuli in a controlled fashion is still challenging. Here we report the synthesis and characterization of a novel discotic molecule, which self-assembles in water into a single-component supramolecular polymer that responds to multiple independent stimuli. The building block of such an assembly is a C₃-symmetric monomer, consisting of a benzene-1,3,5-tricarboxamide core conjugated to a series of natural and non-natural functional amino acids. This design allows the use of rapid and efficient solid-phase synthesis methods and the modular implementation of different functionalities. The discotic monomer incorporates a hydrophobic azobenzene moiety, an octaethylene glycol chain, and a C-terminal lysine. Each of these blocks was chosen for two reasons: to drive the self-assembly in water by a combination of H-bonding and hydrophobicity and to impart specific responsiveness. With a combination of microscopy and spectroscopy techniques, we demonstrate self-assembly in water and responsiveness to temperature, light, pH, and ionic strength. This work shows the potential to integrate independent mechanisms for controlling self-assembly in a single-component supramolecular polymer by the rational monomer design and paves the way toward the use of multiresponsive systems in water.