Monitoring H 2 O 2 on the Surface of Single Cells with Liquid Crystal Elastomer Microspheres

Real-Time pH Sensor in Bacterial Microenvironments Using Liquid Crystal Core-Shell Microspheres

It is well-known that the bacterial microenvironment imposes restrictions on the growth and behavior of bacteria. The localized monitoring of microenvironmental factors is appreciated when consulting bacterial adaptation and behavior in the presence of chemical or mechanical stimuli. Herein, we developed a novel liquid crystal (LC) biosensor in a microsphere configuration for real-time 3D monitoring of the bacteria microenvironment, which was implemented by a microfluidic chip. As a proof of concept, a LC gel (LC-Gel) microsphere biosensor was prepared and employed in the localized pH changes of bacteria by observing the configuration change of LC under polarized optical microscopy. Briefly, the microsphere biosensor was constructed in core-shell configuration, wherein the core contained LCE7 (a nematic LC) doped with 4-pentylbiphenyl-4'-carboxylic acid (PBA), and the shell encapsulated the bacteria. The protonation of carboxyl functional groups of the PBA induced a change in charge density on the surface of LCE7 and the orientation of E7 molecules, resulting in the transitions of the LC nucleus from axial to bipolar. The developed LC-Gel microspheres pH sensor exhibited its dominant performance on localized pH real-time sensing with a resolution of 0.1. An intriguing observation from the prepared pH biosensor was that the diverse bacteria impelled distinct acidifying or alkalizing effects. Overall, the facile LC-Gel microsphere biosensor not only provides a versatile tool for label-free, localized pH monitoring but also opens avenues for investigating the effects of chemical and mechanical stimuli on cellular metabolism within bacterial microenvironments.

Electrochemical control of the morphological evolution of PEDOT on a Ni-Co(OH)2/carbon cloth surface to modulate the performance of wearable H2O2 sensors

The slow redox rate of hydrogen peroxide (H2O2) in neutral environments makes the H2O2 sensor inadequate for the detection of low levels of signalling molecules. The aim of this study is to fabricate a flexible sensing electrode by hydrothermally loading micro-nanometer Ni and Co(OH)2 on carbon cloth (CC) and electrochemically depositing poly(3,4-ethylenedioxythiophene) (PEDOT) on the surface of the electrode. The sensor presented high sensitivity (10.43 mA mM-1 cm-2), a wide detection range (0.033-120.848 mM), a low detection limit (0.92 nM), high stability, and excellent anti-interference performance in neutral solutions. Ni-Co(OH)2 provides abundant active sites while CC solves their agglomeration phenomenon and conductivity. The PEDOT film offers heightened conductivity, hydrophilicity, interfacial stability, and an electrochemically active surface area (ECSA). The side area of the chrysanthemum petal like PEDOT is 39 ± 7 times the bottom area, and PEDOT increases the ECSA of the composite to six times that of CC. Electrochemical precise control of PEDOT morphology to improve sensor performance provides a new strategy for the application of PEDOT in sensors.

Interception Proximity Labeling for Interrogating Cell Efflux Microenvironment

The difficulty in elucidating the microenvironment of extracellular H2O2 efflux has led to the lack of a critical extracellular link in studies of the mechanisms of redox signaling pathways. Herein, we mounted horseradish peroxidase (HRP) to glycans expressed globally on the living cell surface and constructed an interception proximity labeling (IPL) platform for H2O2 efflux. The release of endogenous H2O2 is used as a "physiological switch" for HRP to enable proximity labeling. Using this platform, we visualize the oxidative stress state of tumor cells under the condition of nutrient withdrawal, as well as that of macrophages exposed to nonparticulate stimuli. Furthermore, in combination with a proteomics technique, we identify candidate proteins at the invasion interface between fungal mimics (zymosan) and macrophages by interception labeling of locally accumulated H2O2 and confirm that Toll-like receptor 2 binds zymosan in a glycan-dependent manner. The IPL platform has great potential to elucidate the mechanisms underlying biological processes involving redox pathways.

Superhydrophilicity Regulation of Carbon Nanotubes Boosting Electrochemical Biosensing for Real-time Monitoring of H2O2 Released from Living Cells

Dynamic and accurate monitoring of cell-released electroactive signaling biomolecules through electrochemical techniques has drawn significant research interest for clinical applications. Herein, the functionalized carbon nanotubes (f-CNTs) featuring with gradient surface wettability from hydrophobicity to hydrophilicity, and even to superhydrophilicity, were regulated by thermolysis of an ionic liquid for exploration of the dependence of surface wettability on electrochemical biosensing performance to a cell secretion model of hydrogen peroxide (H2O2). The superhydrophilic f-CNTs demonstrated boosting electrocatalytic reduction activity for H2O2. Additionally, the molecular dynamic (MD) simulations confirmed the more cumulative number density distribution of H2O2 molecules closer to the superhydrophilic surface (0.20 vs 0.37 nm), which would provide a faster diffusional channel compared with the hydrophobic surface. Thereafter, a superhydrophilic biosensing platform with a lower detectable limit reduced by 200 times (0.5 vs 100 μM) and a higher sensitivity over 56 times (0.112 vs 0.002 μA μM cm-2) than that of the hydrophobic one was achieved. Given its excellent cytocompatibility, the superhydrophilic f-CNTs was successfully applied to determine H2O2 released from HeLa cells which were maintained alive after a 30 min real-time monitoring test. The surface hydrophilicity regulation of electrode materials presents a facile approach for real-time monitoring of H2O2 released from living cells and would provide new insights for other electroactive signaling targets at the cellular level.

A Cytidine-Modified surfactant anchored liquid crystal Droplet-Based sensor for rapid and accurate detection of silver ions

Liquid crystal (LC) droplets exhibit unique and sensitive response behaviors to surface absorptions, making them promising candidates for sensing aplications. Here, we have developed a label-free, portable, and cost-effective sensor for the specific and rapid detection of silver ions (Ag+) in drinking-water samples. To achieve this, we have modified cytidine into a surfactant (denoted as C10-M-C) and anchored it onto the surface of LC droplets. The specific binding ability between cytidine and Ag+ enables LC droplets anchored with C10-M-C to respond rapidly and specifically to Ag+ ions. Furthermore, the sensitivity of the response meets requirements for the harmless concentration of Ag+ in drinking-water. The sensor we developed is label-free, portable, and cost-effectively. We believe that the sensor reported here can be applied to the detection of Ag+ in drinking-water and environmental samples.

Non-Mass Spectrometric Targeted Single-Cell Metabolomics

Metabolic assays serve as pivotal tools in biomedical research, offering keen insights into cellular physiological and pathological states. While mass spectrometry (MS)-based metabolomics remains the gold standard for comprehensive, multiplexed analyses of cellular metabolites, innovative technologies are now emerging for the targeted, quantitative scrutiny of metabolites and metabolic pathways at the single-cell level. In this review, we elucidate an array of these advanced methodologies, spanning synthetic and surface chemistry techniques, imaging-based methods, and electrochemical approaches. We summarize the rationale, design principles, and practical applications for each method, and underscore the synergistic benefits of integrating single-cell metabolomics (scMet) with other single-cell omics technologies. Concluding, we identify prevailing challenges in the targeted scMet arena and offer a forward-looking commentary on future avenues and opportunities in this rapidly evolving field.

Progress on Physical Field-Regulated Micro/Nanomotors for Cardiovascular and Cerebrovascular Disease Treatment

Cardiovascular and cerebrovascular diseases (CCVDs) are two major vasculature-related diseases that seriously affect public health worldwide, which can cause serious death and disability. Lack of targeting effect of the traditional CCVD treatment drugs may damage other tissues and organs, thus more specific methods are needed to solve this dilemma. Micro/nanomotors are new materials that can convert external energy into driving force for autonomous movement, which can not only enhance the penetration depth and retention rates, but also increase the contact areas with the lesion sites (such as thrombus and inflammation sites of blood vessels). Physical field-regulated micro/nanomotors using the physical energy sources with deep tissue penetration and controllable performance, such as magnetic field, light, and ultrasound, etc. are considered as the emerging patient-friendly and effective therapeutic tools to overcome the limitations of conventional CCVD treatments. Recent efforts have suggested that physical field-regulated micro/nanomotors on CCVD treatments could simultaneously provide efficient therapeutic effect and intelligent control. In this review, various physical field-driven micro/nanomotors are mainly introduced and their latest advances for CCVDs are highlighted. Last, the remaining challenges and future perspectives regarding the physical field-regulated micro/nanomotors for CCVD treatments are discussed and outlined.

Recent advancements in single-cell metabolic analysis for pharmacological research

Cellular heterogeneity is crucial for understanding tissue biology and disease pathophysiology. Pharmacological research is being advanced by single-cell metabolic analysis, which offers a technique to identify variations in RNA, proteins, metabolites, and drug molecules in cells. In this review, the recent advancement of single-cell metabolic analysis techniques and their applications in drug metabolism and drug response are summarized. High-precision and controlled single-cell isolation and manipulation are provided by microfluidics-based methods, such as droplet microfluidics, microchamber, open microfluidic probe, and digital microfluidics. They are used in tandem with variety of detection techniques, including optical imaging, Raman spectroscopy, electrochemical detection, RNA sequencing, and mass spectrometry, to evaluate single-cell metabolic changes in response to drug administration. The advantages and disadvantages of different techniques are discussed along with the challenges and future directions for single-cell analysis. These techniques are employed in pharmaceutical analysis for studying drug response and resistance pathway, therapeutic targets discovery, and in vitro disease model evaluation.

Upconversion nanoparticles anchored MnO2 nanosheets for luminescence "turn on" detecting hydrogen peroxide

The sensitively and reliably detecting hydrogen peroxide (H₂O₂) is of significant for biology and environment protection fields. Herein, we reported a high sensitive H₂O₂ nanoprobe based on upconversion nanoparticles (UCNPs) anchored MnO₂ nanosheets. In which, DNA modified NaYF₄@NaYF₄:Yb,Tm core-shell nanoparticles were anchored onto the MnO₂ nanosheets surface via π-π stacking. Owing to the luminescence resonance energy transfer, the blue luminescence of UCNPs was effectively quenched by MnO₂ nanosheets, then the luminescence could be restored by adding H₂O₂ for reducing MnO₂ to Mn²⁺, and achieving a H₂O₂ concentration-dependent luminescence change, the detection limit could reach to 0.23 nM (S/N = 3). The proposed method could detect H₂O₂ in serum, lake water and real samples. Thus, a desired upconversion luminescence sensing strategy for detection H₂O₂ in life and environmental analysis was successfully constructed. It may be provide a potential tool in disease diagnosis and environmental monitoring fields.

Lyotropic liquid crystal elastomers for drug delivery

Silicone elastomers like polydimethylsiloxane (PDMS) possess a combination of attractive material and biological properties motivating their widespread use in biomedical applications. Development of elastomers with capacity to deliver active therapeutic substances in the form of drugs is of particular interest to produce medical devices with added functionality. In this work, silicone-based lyotropic liquid crystal elastomers with drug-eluting functionality were developed using PDMS and triblock copolymer (diacrylated Pluronic F127, DA-F127). Various ternary PDMS-DA-F127-H₂O compositions were explored and evaluated. Three compositions were found to have specific properties of interest and were further investigated for their nanostructure, mechanical properties, water retention capacity, and morphology. The ability of the elastomers to encapsulate and release polar and nonpolar substances was demonstrated using vancomycin and ibuprofen as model drugs. It was shown that the materials could deliver both types of drugs with a sustained release profile for up to 6 and 5 days for vancomycin and ibuprofen, respectively. This works demonstrates a lyotropic liquid crystal, silicone-based elastomer with tailorable mechanical properties, water retention capacity and ability to host and release polar and nonpolar active substances.

Functional Liquid Crystal Core/Hydrogel Shell Microcapsules for Monitoring Live Cells in a 3D Microenvironment

Three-dimensional (3D) cell culture, even as a simple microspheroid model, can be used to recapitulate the native biological microenvironment of cells. Examining the biochemical characteristics of cells in multicellular hydrogel microspheroids using microsensors is usually limited to monitoring the medium around the microspheroids. Here, functional liquid crystal (LC) core/hydrogel shell microcapsules loaded with cells were prepared using droplet microfluidic technology for monitoring live cells in a 3D microenvironment. These microcapsules have a distinctive core/shell structure; cells can be cultured in the hydrogel shell of this 3D model. The functional LC core responds to the acidic microenvironment of cells, showing an axial-to-bipolar transfiguration. 3D cell culture and visual monitoring of the cell microenvironment can be simultaneously achieved in a single microcapsule. Therefore, this novel method may enable a standard approach for monitoring multiple ions or molecules in a 3D model of the cell microenvironment.

NIR light-propelled bullet-shaped carbon hollow nanomotors with controllable shell thickness for the enhanced dye removal

Materials with asymmetric nanostructures have attracted tremendous research attention due to their unique structural characteristics, excellent physicochemical properties, and promising prospects. However, it is still difficult to design and fabricate bullet-shaped nanostructure due to its structural complexity. Herein, for the first time, we successfully constructed NIR light-propelled bullet-shaped hollow carbon nanomotors (BHCNs) with an open mouth on the bottom of nano-bullet for the enhanced dye removal, by employing bullet-shaped silica nanoparticles (B-SiO₂ NPs) as a hard template. BHCNs were formed by the growth of polydopamine (PDA) layer on the heterogeneous surface of B-SiO₂ NPs, followed by the carbonization of PDA and subsequent selective etching of SiO₂. The shell thickness of BHCNs was able to be facilely controlled from ≈ 14 to 30 nm by tuning the added amount of dopamine. The combination of streamlined bullet-shaped nanostructure with good photothermal conversion efficiency of carbon materials facilitated the generation of asymmetric thermal gradient field around itself, thus driving the motion of BHCNs by self-thermophoresis. Noteworthily, the diffusion coefficient (De) and velocity of BCHNs with shell thickness of 15 nm (BHCNs-15) reached to 43.8 μm⋅cm^-2 and 11.4 μm⋅s^-1, respectively, under the illumination of 808 nm NIR laser with the power density of 1.5 W⋅cm^-2. The NIR laser propulsion caused BCHNs-15 to enhance the removal efficiency (53.4% vs. 25.4%) of methylene blue (MB) as a typical dye because the faster velocity could produce the higher micromixing role between carbon adsorbent and MB. Such a smart design of the streamlined nanomotors may provide a promising potential in environmental treatment, biomedical and biosensing applications.

Liquid Crystal Droplet-Based Biosensors: Promising for Point-of-Care Testing

The development of biosensing platforms has been impressively accelerated by advancements in liquid crystal (LC) technology. High response rate, easy operation, and good stability of the LC droplet-based biosensors are all benefits of the long-range order of LC molecules. Bioprobes emerged when LC droplets were combined with biotechnology, and these bioprobes are used extensively for disease diagnosis, food safety, and environmental monitoring. The LC droplet biosensors have high sensitivity and excellent selectivity, making them an attractive tool for the label-free, economical, and real-time detection of different targets. Portable devices work well as the accessory kits for LC droplet-based biosensors to make them easier to use by anyone for on-site monitoring of targets. Herein, we offer a review of the latest developments in the design of LC droplet-based biosensors for qualitative target monitoring and quantitative target analysis.

In Situ Imaging of Endogenous Hydrogen Peroxide Efflux from Living Cells via Bipolar Gold Nanoelectrode Array and Electrochemiluminescence Technology

The integration of a closed bipolar electrode (c-BPE) array and electrochemiluminescence (ECL) detection received a boost in applications in the detection of cell adhesion and disease-related biomarkers. This work proposed a gold nanorod array based c-BPE-ECL system to realize an in situ image of endogenous hydrogen peroxide (H₂O₂) efflux from living cells and parallel analysis of endogenous H₂O₂ released from multiple cells by converting electrochemical signals into optical signals. The gold nanorod array with high density was prepared by a repeating chronopotentiometry procedure with anodic aluminum oxide (AAO) membrane as a template. The c-BPE array was fabricated by assembling poly(dimethylsiloxane) (PDMS) chips on both sides of the gold nanorod array. When an appropriate driving potential is applied, H₂O₂ generated from living cells at the sensing pole was reduced on the gold nanorod, triggering the oxidation of the ECL reagent at the reporting pole, which allowed the detection of H₂O₂ released from living cells. Under phorbol myristate acetate (PMA) stimulation, H₂O₂ released from living HeLa, HepG2, MCF-7, and LO2 cells was determined to be 47, 32.4, 25.7, and 6.3 μM, respectively. This indicated that the amount of H₂O₂ released from PMA-stimulated cancer cells was significantly higher than that from the stimulated normal cells. This work presented a new approach for in situ imaging of H₂O₂ released from living cells and could also be used to detect other electrochemically active or non-electrochemically active molecules through simple cell surface modification, which may have potential applications in cell apoptosis study and disease diagnosis.

In situ SERS monitoring of intracellular H2O2 in single living cells based on label-free bifunctional Fe3O4@Ag nanoparticles

Visualization of signaling molecules in single living cells is crucial for understanding cellular metabolism and physiology, which can provide valuable insights into early diagnoses and treatments of diseases. Highly sensitive in situ monitoring of intracellular analytes released from single living cells by virtue of label-free nanosensors is urgently needed, which can avoid interferences from molecular labeling. Here, we proposed an ultrasensitive strategy for in situ imaging of intracellular H₂O₂ in single living cancer cells by surface-enhanced Raman scattering (SERS) spectroscopy with the utilization of label-free Fe₃O₄@Ag core-satellite nanoparticles (NPs). The Fe₃O₄@Ag NPs can efficiently and selectively catalyze the oxidation of the peroxidase substrate 3,3',5,5'-tetramethylbenzidine (TMB) in the presence of H₂O₂. Additionally, they exhibit excellent SERS activity that allows for in situ monitoring of intracellular H₂O₂ in living cells through establishing the correlation between the H₂O₂ level and the SERS intensity of the catalytic oxidation product of TMB. The H₂O₂ concentration is revealed through the SERS intensity of oxidized TMB with a good linear response in a wide range from 1 fM to 1 mM. Moreover, the intracellular H₂O₂ level in live cancer cells and imaging of the distribution of H₂O₂ inside single cells can be achieved by using such a label-free nanosensor based strategy. Our work demonstrates that the label-free Fe₃O₄@Ag NP-based SERS imaging and quantification strategy is a promising and powerful approach to assess intracellular H₂O₂ in living cells and allows us to monitor single-cell signaling molecules with nanoscale resolution.

Partial induced reorientation of 5CB in a liquid crystal microarray and a signal-on sensing assay for the detection of aflatoxin B1

Herein, a signal-on liquid crystal microarray (LCM) sensor is designed for the first time with a micro-spectral optical sensing signal. Depending on the change of the orientation of the LC molecules in the LCM films and the intensity of the spectral peaks of the PhCs, the signal-on LCM biosensor achieves the detection of AFB1 and the Partial Response Mechanism (PSM) of the LCM films is discovered.

Simple and Rapid Detection of Ibuprofen─A Typical Pharmaceuticals and Personal Care Products─by a Liquid Crystal Aptasensor

This work established a liquid crystal (LC) aptasensor for simple and rapid detection of ibuprofen, a typical pharmaceuticals and personal care products (PPCPs) pollutant. A negatively charged DNA aptamer specific for ibuprofen and a positively charged amphiphilic surfactant, hexadecyltrimethylammonium bromide (CTAB), were incubated with the sample and then directly added onto the LC interface. In the presence of ibuprofen, the specific binding of ibuprofen with the DNA aptamer will release CTAB, which then adsorbed at the LC-aqueous interface and induced the orientational change of LCs to homeotropic orientation with a dark optical signal output. While in the absence of ibuprofen, the DNA aptamer binds with CTAB through hydrophobic and electrostatic interactions, LCs remained in the planar orientation with a bright optical signal output. This LC aptasensor also has good specificity for ibuprofen and can even detect ibuprofen drug in tap water. Moreover, the response time of the LC aptasensor is fast in minutes. Additionally, this LC aptasensor benefits in monitoring the water quality and inspires the exploration of a general platform for PPCPs detection.

Liquid Crystals: Versatile Self-Organized Smart Soft Materials

Smart soft materials are envisioned to be the building blocks of the next generation of advanced devices and digitally augmented technologies. In this context, liquid crystals (LCs) owing to their responsive and adaptive attributes could serve as promising smart soft materials. LCs played a critical role in revolutionizing the information display industry in the 20th century. However, in the turn of the 21st century, numerous beyond-display applications of LCs have been demonstrated, which elegantly exploit their controllable stimuli-responsive and adaptive characteristics. For these applications, new LC materials have been rationally designed and developed. In this Review, we present the recent developments in light driven chiral LCs, i.e., cholesteric and blue phases, LC based smart windows that control the entrance of heat and light from outdoor to the interior of buildings and built environments depending on the weather conditions, LC elastomers for bioinspired, biological, and actuator applications, LC based biosensors for detection of proteins, nucleic acids, and viruses, LC based porous membranes for the separation of ions, molecules, and microbes, living LCs, and LCs under macro- and nanoscopic confinement. The Review concludes with a summary and perspectives on the challenges and opportunities for LCs as smart soft materials. This Review is anticipated to stimulate eclectic ideas toward the implementation of the nature's delicate phase of matter in future generations of smart and augmented devices and beyond.

A single-atom Cu-N2 catalyst eliminates oxygen interference for electrochemical sensing of hydrogen peroxide in a living animal brain

Hydrogen peroxide (H₂O₂) plays essential roles in various physiological and pathological processes. The electrochemical hydrogen peroxide reduction reaction (HPRR) has been recognized as an efficient approach to H₂O₂ sensing; however, the HPRR has always suffered from low tolerance against the oxygen reduction reaction (ORR), resulting in poor selectivity of the HPRR-based sensing platform. In this study, we find that the electrochemical HPRR occurs preferentially compared to the ORR when isolated Cu atoms anchored on carbon nitride (Cu₁/C₃N₄) are used as a single-atom electrocatalyst, which is theoretically attributed to the lower energy barrier of the HPRR than that of the ORR on a Cu₁/C₃N₄ single-atom catalyst (SAC). With the Cu₁/C₃N₄ SAC as the electrocatalyst, we fabricated microsensors that have a good response to H₂O₂, but not to O₂ or other electroactive neurochemicals. When implanted into a living rat brain, the microsensor shows excellent in vivo sensing performance, enabling its application in real-time quantitative investigation of the dynamics of H₂O₂ production induced by mercaptosuccinate and glutathione monoethyl ester in a living animal brain.

We have achieved the selective monitoring of H₂O₂ fluctuation in vivo free from O₂ interference by a single-atom Cu–N₂ electrocatalyst.

A portable digital optical kanamycin sensor developed by surface-anchored liquid crystal droplets

There is an increase in demand to develop simple, convenient, and low-cost approaches for rapid and label-free detection of antibiotics. Herein, we propose a new principle for the detection of kanamycin using the surface-anchored liquid crystal (LC) droplets. The optical images of the LC droplets uniformly change from four-clover, uniformly dark, and dark cross appearance gradually with the increase of surfactant concentration. The detection of kanamycin is fulfilled with the aid of a cationic surfactant cetyltrimethylammonium bromide (CTAB) and a kanamycin aptamer. The LC droplets show uniformly dark appearance and four-clover appearance in the presence of the aqueous solutions of CTAB and CTAB/aptamer complex, respectively. However, the specific binding of kanamycin to its aptamer can release the CTAB, which induces the uniformly dark appearance of the LC droplets. A portable device is built to measure the optical luminance of the LC droplets. This system can detect kanamycin with a concentration below 0.1 ng/mL (~0.17 nM) and also allows the detection of kanamycin in real samples such as milk and honey. Therefore, it is very promising in the development of new types of LC-based sensors by the surface-anchored LC droplets assisted with a portable optical device.

In Situ Monitoring of Hydrogen Peroxide Released from Living Cells Using a ZIF-8-Based Surface-Enhanced Raman Scattering Sensor

Hydrogen peroxide (H₂O₂) widely involves in intracellular and intercellular redox signaling pathways, playing a vital role in regulating various physiological events. Nevertheless, current analytical methods for the H₂O₂ assay are often hindered by relatively long response time, low sensitivity, or self-interference. Herein, a zeolitic imidazolate framework-8 (ZIF-8)-based surface-enhanced Raman scattering (SERS) sensor has been developed to detect H₂O₂ released from living cells by depositing ZIF-8 over SERS active gold nanoparticles (AuNPs) grafted with H₂O₂-responsive probe molecules, 2-mercaptohydroquinone. Combining the superior fingerprint identification of SERS and the highly efficient enrichment and selective response of H₂O₂ by ZIF, the ZIF-8-based SERS sensor exhibits a high anti-interference ability for H₂O₂ detection, with a limit of detection as low as 0.357 nM. Satisfyingly, owing to the enhanced catalytic activity derived from the successful integration of AuNPs and ZIF, the response time as short as 1 min can be obtained, demonstrating the effectiveness of the SERS sensor for rapid H₂O₂ detection. Furthermore, the developed SERS sensor enables real-time detection of H₂O₂ secreted from living cells under phorbol myristate acetate stimulation, as cells can be cultured on-chip. This study will pave the way toward the development of a metal-organic framework-based SERS platform for application in the fields of biosensing and early disease diagnosis associated with H₂O₂ secretion, thus exhibiting promising potential for future therapies.

Logic-Gated Proximity Aptasensing for Cell-Surface Real-Time Monitoring of Apoptosis

In nature, intact apoptotic cells release ATP as a signaling molecule to trigger prompt phagocytic clearance, even at the earliest stage of apoptosis. Inspired by this, here we introduce a straightforward strategy for real-time monitoring ATP exocytosis and drug-stimulated apoptosis in the cancer cell surroundings. Triplex-boosted G-quadruplexes (tb-G4s) responding to cell environmental factors (H⁺ and K⁺ ) are engineered to construct a DNA logic-gated nanoplatform for proximity ATP aptasensing on the cell surface. It enables the real-time monitoring of cell apoptosis by capturing released endogenous ATP during chemotherapy drug stimulation, providing a sensitive approach for dynamically evaluating drug-induced apoptosis and therapeutic efficacy.

Deployment of MIL-88B(Fe)/TiO2 Nanotube-Supported Ti Wires as Reusable Electrochemiluminescence Microelectrodes for Noninvasive Sensing of H2O2 from Single Cancer Cells

As one of the significant intracellular signaling molecules, hydrogen peroxide (H₂O₂) regulates some vital biological processes. However, it remains a challenge to develop noninvasive electrodes that can be used for sensing trace H₂O₂ at the cellular level. Here, we evaluated a high-performance solid-state electrochemiluminescence (ECL) H₂O₂ sensor based on MIL-88B(Fe) nanocrystal-anchored Ti microwires. Semiconducting TiO₂ nanotubes (TiNTs) vertically grown around a Ti wire via an anodization technique act as an intrinsic ECL luminophore. By integrating with MIL-88B(Fe), the synergistic effect of the TiO₂ luminophore and the remarkable peroxidase-like activity of MIL-88B(Fe) enable the resulting H₂O₂ sensor an ultrahigh sensitivity featuring a minimum detection limit of 0.1 nM (S/N = 3), long-term stability, high durativity, and wide-range linear response to a concentration of up to 10 mM. To demonstrate the concept of a MIL-88B(Fe)@TiO₂ microelectrode for single-cell sensing, the electrode was used to detect intracellular H₂O₂ in a single cell. Moreover, benefiting from the heterojunction of MIL-88B(Fe)/TiO₂, the microelectrode was found to exhibit excellent photocatalytic activity in the visible-light range, that is, the sensor surface can be self-cleaning after a short visible-light treatment. These advanced sensor characteristics involving easy reusability reveal that the MIL-88B(Fe)@TiO₂ microelectrode is a new platform for cytosensing. This study provides a new strategy to design semiconductor materials with arbitrary shape and size, allowing for profound applications in biomedical and clinical analysis.

3D microfluidic tumor models for biomimetic engineering of glioma niche and detection of cell morphology, migration and phenotype change

In this work, an integrated 3-dimensional microfluidic device was developed for simulation of the immune microenvironment of glioma niche through the co-culture of three kinds of related cells. Glioma cells, endothelial cells and macrophages were co-cultured together in the microfluidic device, spatially separated by the design of a coffer structure and the use of hydrogel. This platform enabled separate monitoring of the morphology change and migration of cells, as well as molecular interactions between different kinds of cells. Tumor cells were found to exhibit EMT like shape change to become thinner, and sensitive perception and taxis toward macrophages. The influence of tumor cells and the microenvironment, macrophages would be re-educated and the phenotype could be changed from M1 (tumor-suppressive) to M2 (tumor-supportive), which could be validated through cytokines analysis. This 3D microfluidic tumor model provides a powerful tool for studying the biological properties of glioma niche.

Degradation-Induced Actuation in Oxidation-Responsive Liquid Crystal Elastomers

Stimuli-responsive materials that exhibit a mechanical response to specific biological conditions are of considerable interest for responsive, implantable medical devices. Herein, we report the synthesis, processing and characterization of oxidation-responsive liquid crystal elastomers that demonstrate programmable shape changes in response to reactive oxygen species. Direct ink writing (DIW) is used to fabricate Liquid Crystal Elastomers (LCEs) with programmed molecular orientation and anisotropic mechanical properties. LCE structures were immersed in different media (oxidative, basic and saline) at body temperature to measure in vitro degradation. Oxidation-sensitive hydrophobic thioether linkages transition to hydrophilic sulfoxide and sulfone groups. The introduction of these polar moieties brings about anisotropic swelling of the polymer network in an aqueous environment, inducing complex shape changes. 3D-printed uniaxial strips exhibit 8% contraction along the nematic director and 16% orthogonal expansion in oxidative media, while printed LCEs azimuthally deform into cones 19 times their original thickness. Ultimately, these LCEs degrade completely. In contrast, LCEs subjected to basic and saline solutions showed no apparent response. These oxidation-responsive LCEs with programmable shape changes may enable a wide range of applications in target specific drug delivery systems and other diagnostic and therapeutic tools.

TiO2 nanotube arrays decorated with BiOBr nanosheets by the SILAR method for photoelectrochemical sensing of H2O2

The design and construction of a photoelectrochemical (PEC) sensor with excellent photoelectric properties and good photoelectrocatalysis activity is significant for the effective detection of analytes. In this paper, based on a two-step anodic oxidation method and successive ionic layer adsorption (SILAR) method, a TiO2 nanotube array (TNT) photoelectrochemical sensor modified with BiOBr nanosheets was constructed and applied for the detection of H2O2 for the first time. The photocurrent of the photoelectrochemical sensor increases with the increase of the H2O2 concentration under the irradiation of an 8 W UV lamp. Excellent linearity was obtained in the concentration range from 10 nM to 100 μM with a low detection limit of 5 nM (S/N = 3). This excellent photoelectrochemical performance is due to the formation of a p-n heterojunction between BiOBr and TiO2 nanotube arrays, which provides efficient separation of charge carriers and accelerates electron transport. Moreover, it is applied to detect H2O2 in milk samples and it showed a good recovery result ranging from 95.73% to 105.65%, which provides a promising new strategy for the detection of H2O2.

Screening of Xanthine Oxidase Inhibitors by Liquid Crystal-Based Assay Assisted with Enzyme Catalysis-Induced Aptamer Release

Small-molecule drugs play an important role in the treatment of various diseases. The screening of enzyme inhibitors is one of the most important means in developing therapeutic drugs. Herein, we demonstrate a liquid crystal (LC)-based screening assay assisted with enzyme catalysis-induced aptamer release for screening xanthine oxidase (XOD) inhibitors. The oxidation of xanthine by XOD prevents the specific binding of xanthine and its aptamer, which induces a bright image of LCs. However, when XOD is inhibited, xanthine specifically binds to the aptamer. Correspondingly, LCs display a dark image. Three compounds are identified as potent XOD inhibitors by screening a small library of triazole derivatives using this method. Molecular docking verifies the occupation of the active site by the inhibitor, which also exhibits excellent biocompatibility to HEK293 cells and HeLa cells. This strategy takes advantages of the unique aptamer-target binding, specific enzymatic reaction, and simple LC-based screening assay, which allows high-throughput and label-free screening of inhibitors with high sensitivity and remarkable accuracy. Overall, this study provides a competent and promising approach to facilitate the screening of enzyme inhibitors using the LC-based assay assisted with the enzyme catalysis-induced aptamer release.

Facile fabrication of self-reporting micellar and vesicular structures based on an etching-ion exchange strategy of photonic composite spheres of poly(ionic liquid)

Micellar and vesicular structures capable of sensing and reporting the chemical environment as well as facilely introducing user-defined functions make a vital contribution to constructing versatile compartmentalized systems. Herein, by combining poly(ionic liquid)-based photonic spheres and an etching-ion exchange strategy we fabricate micellar and vesicular photonic compartments that can not only mimic the structure and function of conventional micelles and vesicles, but also sense and report the chemical environment as well as introducing user-defined functions. Photonic composite spheres composed of a SiO2 template and poly(ionic liquid) are employed to selectively etch outer-shell SiO2 followed by ion exchange and removal of the residual SiO2 to afford micellar photonic compartments (MPCs). The MPCs can selectively absorb solvents from the oil/water mixtures together with sensing and reporting the adsorbed solvents by the self-reporting optical signal associated with the uniform porous structure of photonic spheres. Vesicular photonic compartments (VPCs) are fabricated via selective infiltration and polymerization of ionic liquids followed by etching of the SiO2 template. Subsequent ion exchange introduces desirable functions to the VPCs. Furthermore, we demonstrate that the thickness and the anisotropic functions of VPCs can be facilely modulated. Overall, we anticipate that the micellar and vesicular photonic compartments with self-reporting optical signals and user-defined functions could serve as novel platforms towards multifunctional compartmentalized systems.