A Glass-Ceramic with Accelerated Surface Reconstruction toward the Efficient Oxygen Evolution Reaction

Heterogeneous core-shell Co2(PS3)@Co2P nanowires with accelerated surface reconstruction for efficient electrocatalytic seawater oxidation

The design of pre-catalysts and the rational manipulation of corresponding electrochemical reconstruction are vitally important to construct the highly durable and active catalysts for seawater oxidation, but rather challenging. Herein, a novel core-shell catalyst of Co2(PS3)@Co2P (labeled as CoPS) by epitaxial growth of amorphous cobalt phosphide (Co2P) on crystalline cobalt phosphorous trichalcogenide (Co2(PS3)) is firstly designed as a pre-catalyst for alkaline seawater oxidation. Various characterization techniques are employed to demonstrate that the unique amorphous-crystalline nanowire structure (CoPS) achieves the rapid surface reconstruction into active CoOOH and diversiform oxyanions species (labeled as CoPS-R). Theoretical simulations uncover that the in situ derived oxyanions (PO42-, SO32- and SO42-) on the surface of CoOOH can tune the electron distribution of Co site, thereby optimizing the chemisorption of oxygen evolution reaction (OER) intermediates on CoOOH and reducing the energy barrier of determining step. Consequently, in an alkaline natural seawater solution, the reconstructed CoPS-R catalyst exhibits small overpotentials of 357 and 402 mV for OER at 200 and 500 mA cm-2, respectively, together with an impressive durability over 500 h at a large current density of 500 mA cm-2 benefiting from the strong repulsive effect of the derived PO42-, SO32- and SO42- oxyanions. This work offers a new insight for comprehending the relationship of structure-composition-activity and develops a new approach toward the construction of efficient and robust OER catalysts for seawater electrolysis.

Rapid Defect Engineering in FeCoNi/FeAl2O4 Hybrid for Enhanced Oxygen Evolution Catalysis: A Pathway to High-Performance Electrocatalysts

Rational modulation of surface reconstruction in the oxygen evolution reaction (OER) utilizing defect engineering to form efficient catalytic activity centers is a topical interest in the field of catalysis. The introduction of point defects has been demonstrated to be an effective strategy to regulate the electronic configuration of electrocatalysts, but the influence of more complex planar defects (e.g., twins and stacking faults), on their intrinsic activity is still not fully understood. This study harnesses ultrasonic cavitation for rapid and controlled introduction of different types of defects in the FeCoNi/FeAl2O4 hybrid coating, optimizing OER catalytic activity. Theoretical calculations and experiments demonstrate that the different defects optimize the coordination environment and facilitate the activation of surface reconstruction into true catalytic activity centers at lower potentials. Moreover, it demonstrates exceptional durability, maintaining stable oxygen production at a high current density of 300 mA cm-2 for over 120 hours. This work not only presents a novel pathway for designing advanced electrocatalysts but also deepens our understanding of defect-engineered catalytic mechanisms, showcasing the potential for rapid and efficient enhancement of electrocatalytic performance.

Unraveling the crucial contribution of additive chromate to efficient and stable alkaline seawater oxidation on Ni-based layered double hydroxides

Seawater electrolysis to generate hydrogen offers a clean, green, and sustainable solution for new energy. However, the catalytic activity and durability of anodic catalysts are plagued by the corrosion and competitive oxidation reactions of chloride in high concentrations. In this study, we find that the additive CrO42- anions in the electrolyte can not only promote the formation and stabilization of the metal oxyhydroxide active phase but also greatly mitigate the adverse effect of Cl- on the anode. Linear sweep voltammetry, accelerated corrosion experiments, corrosion polarization curves, and charge transfer resistance results indicate that the addition of CrO42- distinctly improves oxygen evolution reaction (OER) kinetics and corrosion resistance in alkaline seawater electrolytes. Especially, the introduction of CrO42- even in the highly concentrated NaCl (2.5 M) electrolyte prolongs the durability of NiFe-LDH to almost five times the case without CrO42-. Density functional theory calculations also reveal that the adsorption of CrO42- can tune the electronic configuration of active sites of metal oxyhydroxides, enhance conductivity, and optimize the intermediate adsorption energies. This anionic additive strategy can give a better enlightenment for the development of efficient and stable oxygen evolution reactions for seawater electrolysis.

Redox Promoted Rapid and Deep Reconstruction of Defect-Rich Nickel Precatalysts for Efficient Water Oxidation

Understanding the reconstruction mechanism to rationally design cost-effective electrocatalysts for oxygen evolution reaction (OER) is still challenging. Herein, a defect-rich NiMoO4 precatalyst is used to explore its OER activity and reconstruction mechanism. In situ generated oxygen vacancies, distorted lattices, and edge dislocations expedite the deep reconstruction of NiMoO4 to form polycrystalline Ni (oxy)hydroxides for alkaline oxygen evolution. It only needs ≈230 and ≈285 mV to reach 10 and 100 mA cm-2, respectively. The reconstruction boosted by the redox of Ni is confirmed experimentally by sectionalized cyclic voltammetry activations at different specified potential ranges combined with ex situ characterization techniques. Subsequently, the reconstruction route is presented based on the acid-base electronic theory. Accordingly, the dominant contribution of the adsorbate evolution mechanism to reconstruction during oxygen evolution is revealed. This work develops a novel route to synthesize defect-rich materials and provides new tactics to investigate the reconstruction.

Efficient and durable seawater electrolysis with a V2O3-protected catalyst

The ocean, a vast hydrogen reservoir, holds potential for sustainable energy and water development. Developing high-performance electrocatalysts for hydrogen production under harsh seawater conditions is challenging. Here, we propose incorporating a protective V2O3 layer to modulate the microcatalytic environment and create in situ dual-active sites consisting of low-loaded Pt and Ni3N. This catalyst demonstrates an ultralow overpotential of 80 mV at 500 mA cm-2, a mass activity 30.86 times higher than Pt-C and maintains at least 500 hours in seawater. Moreover, the assembled anion exchange membrane water electrolyzers (AEMWE) demonstrate superior activity and durability even under demanding industrial conditions. In situ localized pH analysis elucidates the microcatalytic environmental regulation mechanism of the V2O3 layer. Its role as a Lewis acid layer enables the sequestration of excess OH- ions, mitigate Cl- corrosion, and alkaline earth salt precipitation. Our catalyst protection strategy by using V2O3 presents a promising and cost-effective approach for large-scale sustainable green hydrogen production.

Intercalated and Surface-Adsorbed Phosphate Anions in NiFe Layered Double-Hydroxide Catalysts Synergistically Enhancing Oxygen Evolution Reaction Activity

The oxygen evolution reaction (OER), a crucial semireaction in water electrolysis and rechargeable metal-air batteries, is vital for carbon neutrality. Hindered by a slow proton-coupled electron transfer, an efficient catalyst activating the formation of an O-H bond is essential. Here, we proposed a straightforward one-step hydrothermal procedure for fabricating PO43--modified NiFe layered double-hydroxide (NiFe LDH) catalysts and investigated the role of PO43- anions in enhancing OER. Phosphate amounts can efficiently regulate LDH morphology, crystallinity, composition, and electronic configuration. The optimized sample showed a low overpotential of 267 mV at 10 mA cm-2. Density functional theory calculations revealed that intercalated and surface-adsorbed PO43- anions in NiFe LDH reduced the Gibbs free energy in the rate-determining step of *OOH formation, balancing oxygen-containing intermediate adsorption/dissociation and promoting the OER. Intercalated phosphate ions accelerated precatalyst dehydrogenation kinetics, leading to a rapid reconstruction into active NiFe oxyhydroxide species. Surface-adsorbed PO43- interacted favorably with adsorbed *OOH on the active Ni sites, stabilizing *OOH. Overall, the synergistic effects of intercalated and surface-adsorbed PO43- anions significantly contributed to enhanced OER activity. Achieving optimal catalytic activity requires a delicate equilibrium between thermodynamic and kinetic factors by meticulously regulating the quantity of introduced PO43- ions. This endeavor will facilitate a deeper comprehension of the influence of anions in electrocatalysis for OER.

External Field-Responsive Ternary Non-Noble Metal Oxygen Electrocatalyst for Rechargeable Zinc-Air Batteries

Despite the increasing effort in advancing oxygen electrocatalysts for zinc-air batteries (ZABs), the performance development gradually reaches a plateau via only ameliorating the electrocatalyst materials. Herein, a new class of external field-responsive electrocatalyst comprising Ni0.5Mn0.5Fe2O4 stably dispersed on N-doped Ketjenblack (Ni0.5Mn0.5Fe2O4/N-KB) is developed via polymer-assisted strategy for practical ZABs. Briefly, the activity indicator ΔE is significantly decreased to 0.618 V upon photothermal assistance, far exceeding most reported electrocatalysts (generally >0.680 V). As a result, the photothermal electrocatalyst possesses comprehensive merits of excellent power density (319 mW cm-2), ultralong lifespan (5163 cycles at 25 mA cm-2), and outstanding rate performance (100 mA cm-2) for liquid ZABs, and superb temperature and deformation adaptability for flexible ZABs. Such improvement is attributed to the photothermal-heating-enabled synergy of promoted electrical conductivity, reactant-molecule motion, active area, and surface reconstruction, as revealed by operando Raman and simulation. The findings open vast possibilities toward more-energy-efficient energy applications.

Oxygen vacancies enhanced electrocatalytic water splitting of P-FeMoO4 initiated via phosphorus doping

Transition metal oxides (TMOs) are abundant and cost-effective materials. However, poor conductivity and low intrinsic activity limit their application in electrolyzed water catalysts. Herein, we prepared P-FeMoO4 in situ on nickel foam (P-FMO@NF) by phosphorylation-modified FeMoO4 to optimize its electrocatalytic properties. Interestingly, phosphorus doping is accompanied by the generation of oxygen vacancies and surface phosphates. Oxygen vacancies accelerated Mo dissolution during the oxygen evolution reaction (OER), leading to the rapid reconfiguration of P-FMO@NF to FeOOH and regulating the electronic structure of P-FMO@NF. The formation of phosphates is caused by the substitution of some molybdates with phosphates, which further increases the amount of oxygen vacancies. Hence, the OER overpotential of P-FMO@NF at a current density of 10 mA cm-2 is only 206 mV, and the hydrogen evolution reaction (HER) overpotential is 154 mV. It was assembled into a water splitting cell with a voltage of just 1.59 V at 10 mA cm-2 and shows excellent stability over 50 h. These excellent electrocatalytic properties are mainly attributed to the oxygen vacancies, which improve the interfacial charge transfer properties of the catalysts. This study provides new insights into phosphorus doping and offers a new perspective on the design of electrocatalysts.

NiFe codoping-regulated amorphous/crystalline heterostructured Co-based hydroxides/tungstate with rich oxygen vacancies for efficient water oxidation catalysis

Oxygen evolution reaction (OER) is a crucial half-reaction in water splitting, generating hydrogen for sustainable development, but it is often subject to sluggish kinetics. Abundant transition metal-based OER electrocatalysts have been utilized to expedite the process. However, traditional amorphous catalysts suffer from low conductivity, while the activity of crystalline catalysts is also unsatisfactory. Herein, an amorphous/crystalline heterostructured Co-based hydroxide/tungstate was meticulously constructed and further tailored using a NiFe codoping method (NiFeCoW). Following NiFe codoping, the electronic structure had been modulated, subsequently altering the adsorption toward intermediates. From the electrochemical measurements, the NiFeCoW catalyst demonstrated superior electrocatalytic activity for OER in alkaline media, with a minimal overpotential of 297 mV at 10 mA cm-2 and a cell voltage of 1.57 V for water splitting. This study provides valuable guidance for regulating the amorphous/crystalline heterophase in catalysts through bimetallic modulating engineering.

The synthesis and application of crystalline-amorphous hybrid materials

Crystalline-amorphous hybrid materials (CA-HMs) possess the merits of both pure crystalline and amorphous phases. Abundant dangling bonds, unsaturated coordination atoms, and isotropic structural features in the amorphous phase, as well as relatively high electronic conductivity and thermodynamic structural stability of the crystalline phase simultaneously take effect in CA-HMs. Furthermore, the atomic and bandgap mismatch at the CA-HM interface can introduce more defects as extra active sites, reservoirs for promoted catalytic and electrochemical performance, and induce built-in electric field for facile charge carrier transport. Motivated by these intriguing features, herein, we provide a comprehensive overview of CA-HMs on various aspects-from synthetic methods to multiple applications. Typical characteristics of CA-HMs are discussed at the beginning, followed by representative synthetic strategies of CA-HMs, including hydrothermal/solvothermal methods, deposition techniques, thermal adjustment, and templating methods. Diverse applications of CA-HMs, such as electrocatalysis, batteries, supercapacitors, mechanics, optoelectronics, and thermoelectrics along with underlying structure-property mechanisms are carefully elucidated. Finally, challenges and perspectives of CA-HMs are proposed with an aim to provide insights into the future development of CA-HMs.

Single Atom Iridium Decorated Nickel Alloys Supported on Segregated MoO2 for Alkaline Water Electrolysis

Hetero-interface engineering has been widely employed to develop supported multicomponent catalysts for water electrolysis, but it still remains a substantial challenge for supported single atom alloys. Herein a conductive oxide MoO2 supported Ir1 Ni single atom alloys (Ir1 Ni@MoO2 SAAs) bifunctional electrocatalysts through surface segregation coupled with galvanic replacement reaction, where the Ir atoms are atomically anchored onto the surface of Ni nanoclusters via the Ir-Ni coordination accompanied with electron transfer from Ni to Ir is reported. Benefiting from the unique structure, the Ir1 Ni@MoO2 SAAs not only exhibit low overpotential of 48.6 mV at 10 mA cm-2 and Tafel slope of 19 mV dec-1 for hydrogen evolution reaction, but also show highly efficient alkaline water oxidation with overpotential of 280 mV at 10 mA cm-2 . Their overall water electrolysis exhibits a low cell voltage of 1.52 V at 10 mA cm-2 and excellent durability. Experiments and theoretical calculations reveal that the Ir-Ni interface effectively weakens hydrogen binding energy, and decoration of the Ir single atoms boost surface reconstruction of Ni species to enhance the coverage of intermediates (OH*) and switch the potential-determining step. It is suggested that this approach opens up a promising avenue to design efficient and durable precious metal bifunctional electrocatalysts.

Constructing of CoP-Nb2O5 p-n heterojunction with built-in electric field to accelerate the charge migration in electrocatalytic hydrogen evolution

Studying interfacial charge transfer is of great significance for the preparation of electrocatalysts with high activity for the hydrogen evolution reaction (HER). Particularly, exploring the in-depth catalytic mechanisms and facile fabrication methods of narrow bandgap metal phosphides remains worthwhile. This work successfully combined catalytically inert n-type Nb2O5 with p-type CoP to prepare a p-n heterojunction (CoP-Nb2O5). The self-supporting heterojunction was fabricated by gas-phase phosphorization of the Co(OH)2-Nb2O5 precursor obtained through hydrothermal-electrodeposition strategy. By analyzing the electronic and band structures of CoP and Nb2O5, it was found that there exists a built-in electric field (BEF) in the heterojunction. This BEF can modulate the electronic structure of CoP at the interface, enhance its intrinsic activity and accelerate charge migration. The subsequent experimental results also demonstrate that Nb2O5 can significantly enhance the activity and stability of CoP. Our findings can serve as a novel perspective on the application of p-n heterojunction in the field of energy storage and conversion.

Amorphous-crystalline heterostructures enable energy-level matching of cobalt sulfide/nickel iron layered double hydroxide for efficient oxygen evolution reaction

Interface engineering of heterostructures has emerged as a promising approach to enhance the catalytic activity of nonprecious electrocatalysts. Herein, a novel amorphous cobalt sulfide-crystalline nickel iron layered double hydroxide (a-CoS@NiFe-LDH) hybrid material is presented for application as an electrocatalyst for oxygen evolution reaction (OER). Benefitting from the well-matched energy level structures, the a-CoS@NiFe-LDH catalyst delivers a low overpotential of 221 ± 14 mV at an OER current density of 20 mA cm-2 and a small Tafel slope of 83.1 mV dec-1, showing good OER properties. First-principle computations reveal that the electronic interaction between amorphous cobalt sulfide (a-CoS) and crystalline nickel iron layered double hydroxide (NiFe-LDH) components within a-CoS@NiFe-LDH promotes the adsorbate evolution mechanism and reduces the adsorption energies for oxygen intermediates, thereby enhancing the activity and stability for OER. This work opens up a new avenue to enhance the OER catalytic efficiency via the construction of amorphous-crystalline heterostructures.

Hydrogen co-production via nickel-gold electrocatalysis of water and formaldehyde

Hydrogen is one of the most promising future energy sources due to its highly efficient energy storage and carbon-free features. However, the energy input required for a hydrogen production protocol is an essential factor affecting its widespread adoption. Water electrolysis for hydrogen production currently serves a vital role in the industrial field, but the high overpotential of the oxygen evolution reaction (OER) dramatically impedes its practical application. The formaldehyde oxidation reaction (FOR) has emerged as a more thermodynamically favorable alternative, and the innovation of compatible electrodes may steer the direction of technological evolution. We have designed Au-Vo-NiO/CC as a catalyst that triggers the electrocatalytic oxidation of formaldehyde, efficiently producing H2 at the ultra-low potential of 0.47 V (vs. RHE) and maintaining long-term stability. Integrated with the cathodic hydrogen evolution reaction (HER), this bipolar H2 production protocol achieves a nearly 100% Faraday efficiency (FE).

Progress in Manipulating Dynamic Surface Reconstruction via Anion Modulation for Electrocatalytic Water Oxidation

The development of efficient and economical electrocatalysts for oxygen evolution reaction (OER) is of paramount importance for the sustainable production of renewable fuels and energy storage systems; however, the sluggish OER kinetics involving multistep four proton-coupled electron transfer hampers progress in these systems. Fortunately, surface reconstruction offers promising potential to improve OER catalyst design. Anion modulation plays a crucial role in controlling the extent of surface reconstruction and positively persuading the reconstructed species' performances. This review starts by providing a general explanation of how various types of anions can trigger dynamic surface reconstruction and create different combinations with pre-catalysts. Next, the influences of anion modulation on manipulating the surface dynamic reconstruction process are discussed based on the in situ advanced characterization techniques. Furthermore, various effects of survived anionic groups in reconstructed species on water oxidation activity are further discussed. Finally, the challenges and prospects for the future development directions of anion modulation for redirecting dynamic surface reconstruction to construct highly efficient and practical catalysts for water oxidation are proposed.

Highly Durable and Efficient Seawater Electrolysis Enabled by Defective Graphene-Confined Nanoreactor

Direct seawater electrolysis is a promising technology for massive green hydrogen production but is limited by the lack of durable and efficient electrocatalysts toward the oxygen evolution reaction (OER). Herein, we develop a core-shell nanoreactor as a high-performance OER catalyst consisting of NiFe alloys encapsulated within defective graphene layers (NiFe@DG) by a facile microwave shocking strategy. This catalyst needs overpotentials of merely 218 and 276 mV in alkalized seawater to deliver current densities of 10 and 100 mA cm-2, respectively, and operates continuously for 2000 h with negligible activity decay (1.0%), making it one of the best OER catalysts reported to date. Detailed experimental and theoretical analyses reveal that the excellent durability of NiFe@DG originates from the formation of the built-in electric field triggered by the defective graphene coating against chloride ions at the electrode/electrolyte interface, thus protecting the active NiFe alloys at the core from dissolution and aggregation under harsh operation conditions. Further, a highly stable and efficient seawater electrolyzer is assembled with the NiFe@DG anode and the Pt/C cathode to demonstrate the practicability of the catalysts.

Strain and Surface Engineering of Multicomponent Metallic Nanomaterials with Unconventional Phases

Multicomponent metallic nanomaterials with unconventional phases show great prospects in electrochemical energy storage and conversion, owing to unique crystal structures and abundant structural effects. In this review, we emphasize the progress in the strain and surface engineering of these novel nanomaterials. We start with a brief introduction of the structural configurations of these materials, based on the interaction types between the components. Next, the fundamentals of strain, strain effect in relevant metallic nanomaterials with unconventional phases, and their formation mechanisms are discussed. Then the progress in surface engineering of these multicomponent metallic nanomaterials is demonstrated from the aspects of morphology control, crystallinity control, surface modification, and surface reconstruction. Moreover, the applications of the strain- and surface-engineered unconventional nanomaterials mainly in electrocatalysis are also introduced, where in addition to the catalytic performance, the structure-performance correlations are highlighted. Finally, the challenges and opportunities in this promising field are prospected.

Dynamically Stabilized Electronic Regulation and Electrochemical Reconstruction in Co and S Atomic Pair Doped Fe3 O4 for Water Oxidation

The electronic regulation and surface reconstruction of earth-abundant electrocatalysts are essential to efficient oxygen evolution reaction (OER). Here, an inverse-spinel Co,S atomic pair codoped Fe3 O4 grown on iron foam (Co,S-Fe3 O4 /IF) is fabricated as a cost-effective electrocatalyst for OER. This strategy of Co and S atomic pair directional codoping features accelerates surface reconstruction and dynamically stabilizes electronic regulation. CoS atomic pairs doped in the Fe3 O4 crystal favor controllable surface reconstruction via sulfur leaching, forming oxygen vacancies and Co doping on the surface of reconstructed FeOOH (Co-FeOOH-Ov /IF). Before and after surface reconstruction via in situ electrochemical process, the Fe sites with octahedral field dynamically maintains an appropriate electronic structure for OER intermediates, thus exhibiting consistently excellent OER performance. The electrochemically tuned Fe-based electrodes exhibit a low overpotential of 349 mV at a current density of 1000 mA cm-2 , a slight Tafel slope of 43.3 mV dec-1 , and exceptional long-term electrolysis stability of 200 h in an alkaline medium. Density functional theory calculations illustrate the electronic regulation of Fe sites, changes in Gibbs free energies, and the breaking of the restrictive scaling relation between OER intermediates. This work provides a promising directional codoping strategy for developing precatalysts for large-scale water-splitting systems.

A Facile Molecular Approach to Amorphous Nickel Pnictides and Their Reconstruction to Crystalline Potassium-Intercalated γ-NiOOHx Enabling High-Performance Electrocatalytic Water Oxidation and Selective Oxidation of 5-Hydroxymethylfurfural

The low-temperature molecular precursor approach can be beneficial to conventional solid-state methods, which require high temperatures and lead to relatively large crystalline particles. Herein, a novel, single-step, room-temperature preparation of amorphous nickel pnictide (NiE; EP, As) nanomaterials is reported, starting from NaOCE(dioxane)n and NiBr2 (thf)1.5 . During application for the oxygen evolution reaction (OER), the pnictide anions leach, and both materials fully reconstruct into nickel(III/IV) oxide phases (similar to γ-NiOOH) comprising edge-sharing (NiO6 ) layers with intercalated potassium ions and a d-spacing of 7.27 Å. Remarkably, the intercalated γ-NiOOHx phases are nanocrystalline, unlike the amorphous nickel pnictide precatalysts. This unconventional reconstruction is fast and complete, which is ascribed to the amorphous nature of the nanostructured NiE precatalysts. The obtained γ-NiOOHx can effectively catalyse the OER for 100 h at a high current density (400 mA cm-2 ) and achieves outstandingly high current densities (>600 mA cm-2 ) for the selective, value-added oxidation of 5-hydroxymethylfurfural (HMF). The NiP-derived γ-NiOOHx shows a higher activity for both processes due to more available active sites. It is anticipated that the herein developed, effective, room-temperature molecular synthesis of amorphous nickel pnictide nanomaterials can be applied to other functional transition-metal pnictides.

Vertical 3D Nanostructures Boost Efficient Hydrogen Production Coupled with Glycerol Oxidation Under Alkaline Conditions

Hydrogen production from electrolytic water is an important sustainable technology to realize renewable energy conversion and carbon neutrality. However, it is limited by the high overpotential of oxygen evolution reaction (OER) at the anode. To reduce the operating voltage of electrolyzer, herein thermodynamically favorable glycerol oxidation reaction (GOR) is proposed to replace the OER. Moreover, vertical NiO flakes and NiMoNH nanopillars are developed to boost the reaction kinetics of anodic GOR and cathodic hydrogen evolution, respectively. Meanwhile, excluding the explosion risk of mixed H2/O2, a cheap organic membrane is used to replace the expensive anion exchange membrane in the electrolyzer. Impressively, the electrolyzer delivers a remarkable reduction of operation voltage by 280 mV, and exhibits good long-term stability. This work provides a new paradigm of hydrogen production with low cost and good feasibility.

Regulating the Spin State of Metal and Metal Carbide Heterojunctions for Efficient Oxygen Evolution

Developing high-performance electrocatalysts for oxygen evolution reaction (OER) is of importance for improving the overall efficiency of water splitting. Herein, the CoFe/(Co_xFe_1-x)₃Mo₃C heterojunction is purposely designed as an OER catalyst, which displays a low overpotential of 293 mV for affording a current density of 10 mA cm^-2 and a small Tafel slope of 48 mV/dec. Various characterization results demonstrate that the significant work-function difference between CoFe and (Co_xFe_1-x)₃Mo₃C can induce interfacial charge redistribution, which results in the formation of Co and Fe sites with a high-spin state, thus stimulating the surface phase reconstruction of CoFe/(Co_xFe_1-x)₃Mo₃C to corresponding active oxyhydroxide. Meanwhile, the electrochemical leaching of Mo ions from the initial structure can contribute to the formation of defective sites, further benefiting OH^- adsorption and surface oxidation. Moreover, the remaining CoFe can accelerate electron migration during the electrocatalytic process. This study presents new insights into constructing efficient OER electrocatalysts with an optimized spin-state configuration via interfacial engineering.

Oxyanion Engineering Suppressed Iron Segregation in Nickel-Iron Catalysts Toward Stable Water Oxidation

Nickel-iron catalysts represent an appealing platform for electrocatalytic oxygen evolution reaction (OER) in alkaline media because of their high adjustability in components and activity. However, their long-term stabilities under high current density still remain unsatisfactory due to undesirable Fe segregation. Herein, a nitrate ion (NO₃ ^- ) tailored strategy is developed to mitigate Fe segregation, and thereby improve the OER stability of nickel-iron catalyst. X-ray absorption spectroscopy combined with theoretical calculations indicate that introducing Ni₃ (NO₃ )₂ (OH)₄ with stable NO₃ ^- in the lattice is conducive to constructing the stable interface of FeOOH/Ni₃ (NO₃ )₂ (OH)₄ via the strong interaction between Fe and incorporated NO₃ ^- . Time of flight secondary ion mass spectrometry and wavelet transformation analysis demonstrate that the NO₃ ^- tailored nickel-iron catalyst greatly alleviates Fe segregation, exhibiting a considerably enhanced long-term stability with a six-fold improvement over FeOOH/Ni(OH)₂ without NO₃ ^- modification. This work represents a momentous step toward regulating Fe segregation for stabilizing the catalytic performances of nickel-iron catalysts.

Operando spectroscopies capturing surface reconstruction and interfacial electronic regulation by FeOOH@Fe2O3@Ni(OH)2 heterostructures for robust oxygen evolution reaction

Developing high-performance and low-cost electrocatalysts for oxygen evolution reaction (OER) and understanding the phase evolution in the catalytic process are vital to improving the overall efficiency of electrochemical water splitting. Herein, a hybrid heterogeneous FeOOH@Fe₂O₃@Ni(OH)₂ electrocatalyst with robust OER intrinsic activity and a low overpotential of 269 mV to obtain a current density of 100 mA cm^-2 and a Tafel slope value of 60.15 mV dec^-1 is effectively prepared. The dynamic surface evolution has been detected by in-situ Raman spectroscopy, which exposes that FeOOH@Fe₂O₃@Ni(OH)₂ is reconstituted as Ni(Fe)OOH demonstrated as catalytically active species under high potential. X-ray photoelectron spectroscopy analysis indicates that partial electrons of Ni in the heterogeneous interface transfer to Fe. Furthermore, partial Fe doping of NiOOH under high potential accompanied by the oxidized Ni³⁺ with optimized d-orbit electronic configuration for nearly unity e_g occupancy results in proper chemisorption bonding strength for oxygen reaction intermediates and is conducive to enhancing OER reaction kinetics. This work provides ideas that multicomponent heterostructure can adjust the electronic structure of iron and nickel to enhance the intrinsic activity of OER, which could help with the design and synthesis of high-performance OER catalysts used in energy storage and conversion.

Oxidation State Engineering in Octahedral Ni by Anchored Sulfate to Boost Intrinsic Oxygen Evolution Activity

Promoting the electron occupancy of active sites to unity is an effective method to enhance the oxygen evolution reaction (OER) performance of spinel oxides, but it remains a great challenge. Here, an in situ approach is developed to modify the valence state of octahedral Ni cations in NiFe₂O₄ inverse spinel via surface sulfates (SO₄^2-). Different from previous studies, SO₄^2- is directly anchored on the spinel surface instead of forming from uncontrolled conversion or surface reconstruction. Experiment and theoretical calculations reveal the precise adsorption sites and spatial arrangement for SO₄^2- species. As a main promoting factor, surface SO₄^2- effectively converts the crystal field stable Ni state (t_2g⁶e_g²) to the near-unity e_g electron state (t_2g⁶e_g¹). Moreover, the inevitable oxygen vacancies (V_o) further optimize the energy barrier of the potential-determining step (from OH* to O*). This co-modification strategy enhances turnover frequency-based electrocatalytic activity about two orders higher than the control sample without surface sulfates. This work may provide insight into the OER activity enhancement mechanism by the oxyanion groups.

Self-Terminating Surface Reconstruction Induced by High-Index Facets of Delafossite for Accelerating Ammonia Oxidation Reaction Involving Lattice Oxygen

Ammonia (NH₃ ) is a promising hydrogen (H₂ ) carrier for future carbon-free energy systems, due to its high hydrogen content and easiness to be liquefied. Inexpensive and efficient catalysts for ammonia electro-oxidation reaction (AOR) are desired in whole ammonia-based energy systems. In this work, ultrasmall delafossite (CuFeO₂ ) polyhedrons with exposed high-index facets are prepared by a one-step NH₃ -assisted hydrothermal method, serving as AOR pre-catalysts. The high-index CuFeO₂ facet is revealed to facilitate surface reconstruction into active Cu-doped FeOOH nanolayers during AOR processes in ammonia alkaline solutions, which is driven by the favorable Cu leaching and terminates as the 2p levels of internal lattice oxygen change. The reconstructed heterostructures of CuFeO₂ and Cu-doped FeOOH effectively activate the dehydrogenation steps of NH₃ and exhibit a potential improvement of 260 mV for electrocatalytic AOR at 10 mA cm^-2 compared to the pre-restructured phase. Further, density functional theory (DFT) calculations confirm that a lower energy barrier of the rate-determining step (*NH₃ to *NH₂ ) is presented on high-index CuFeO₂ facets covered with Cu-doped FeOOH nanolayers. Innovatively, lattice oxygen atoms in Fe-based oxides and oxyhydroxide are involved in the dehydrogenation steps of AOR as a proton acceptor, broadening the horizons for rational designs of AOR catalysts.

Oxygen Evolution/Reduction Reaction Catalysts: From In Situ Monitoring and Reaction Mechanisms to Rational Design

The oxygen evolution reaction (OER) and oxygen reduction reaction (ORR) are core steps of various energy conversion and storage systems. However, their sluggish reaction kinetics, i.e., the demanding multielectron transfer processes, still render OER/ORR catalysts less efficient for practical applications. Moreover, the complexity of the catalyst-electrolyte interface makes a comprehensive understanding of the intrinsic OER/ORR mechanisms challenging. Fortunately, recent advances of in situ/operando characterization techniques have facilitated the kinetic monitoring of catalysts under reaction conditions. Here we provide selected highlights of recent in situ/operando mechanistic studies of OER/ORR catalysts with the main emphasis placed on heterogeneous systems (primarily discussing first-row transition metals which operate under basic conditions), followed by a brief outlook on molecular catalysts. Key sections in this review are focused on determination of the true active species, identification of the active sites, and monitoring of the reactive intermediates. For in-depth insights into the above factors, a short overview of the metrics for accurate characterizations of OER/ORR catalysts is provided. A combination of the obtained time-resolved reaction information and reliable activity data will then guide the rational design of new catalysts. Strategies such as optimizing the restructuring process as well as overcoming the adsorption-energy scaling relations will be discussed. Finally, pending current challenges and prospects toward the understanding and development of efficient heterogeneous catalysts and selected homogeneous catalysts are presented.

Complete reconstruction of NiMoO4/NiFe LDH for enhanced oxygen evolution reaction

The oxygen evolution reaction (OER) is a vital half-reaction in several electrochemical energy conversion devices. Herein, we report a hierarchical NiMoO₄/NiFe LDH pre-catalyst that enables complete reconstruction and fine structural inheritance, while exhibiting a low overpotential of 188 mV at 10 mA cm^-2 in 1.0 M KOH.

Apparent activity and specific activity of lanthanides (La, Ce, Nd) decorated Co-MOF derivatives for electrocatalytic water splitting

Lanthanide (Ln) rare Earth (RE) elements are often used to incorporate and regulate the local coordination environment and electronic configuration of transition metal based electrocatalysts for acquiring improved electrocatalytic performance. But for a given pristine electrode, is a Ln element concentrated more on promoting the apparent activity of original electrode or on enhancing its specific activity? To address this issue, Ln (La, Ce and Nd) decorated ZIF-67 derivative electrodes (Ln/Co/NC) were fabricated following with the detailed experimental testing of apparent activity and specific activity of assembled electrodes. X-ray photoelectron spectroscopy data confirmed that Ce, Nd and La have played their own role in regulating the coordination electronic structure of the surface atoms of the derived Co/NC by forming different types of chemical bonds. Electrochemical (EC) results confirmed that Ce is concentrated more on the apparent activity of derived Co/NC electrode with the smallest overpotential at 50 mA cm^-2(η₅₀), while Nd contributes more to its reaction kinetic property with the smallest value of Tafel slope in alkaline hydrogen evolution reaction process. But for oxygen evolution reaction, all of La, Ce and Nd deteriorate the apparent activity of the pristine Co/NC electrode. Comparatively, La shows a greater ability to modulate the specific activity of Co/NC with a larger electrochemical active surface area normalized current density, while Nd exhibits the best ability to re-establish the properties of reaction centers. This work illustrates the difference influence of La, Ce and Nd on the apparent activity and specific activity of the ZIF-67 derivative Co/NC electrode. It will do some favors in engineering RE elements modified composite electrodes for EC applications.

Formation and Stabilization of NiOOH by Introducing α-FeOOH in LDH: Composite Electrocatalyst for Oxygen Evolution and Urea Oxidation Reactions

NiOOH is considered as the most active intermediate during electrochemical oxidation reaction, however, it is hard to directly synthesize due to high oxidation energy. Herein, theoretical calculations predict that α-FeOOH enables a decline in formation energy and an improvement in stabilization of NiOOH in NiFe-based layered double hydroxide (LDH). Inspiringly, a composite composed of α-FeOOH and LDH is well-designed and successfully fabricated in hydrothermal treatment by adding extra Fe³⁺ resource, and stable NiOOH is obtained by the following electro-oxidation method. Benefiting from strong electron-capturing capability of α-FeOOH, it efficiently promotes charge redistribution around the Ni/Fe sites and activates Ni atoms of LDH, verified by X-ray photoelectron spectra (XPS) and X-ray absorption spectra (XAS). The d-band center is optimized that balances the absorption and desorption energy, and thus Gibbs free energy barrier is lowered dramatically toward oxygen evolution reaction (OER) and urea oxidation reaction (UOR), and finally showing an outstanding overpotential of 195 mV and a potential of 1.35 V at 10 mA cm^-2 , respectively. This study provides a novel strategy to construct highly efficient catalysts via the introduction of a new phase for complex multiple-electron reactions.

Sulfate-Decorated Amorphous-Crystalline Cobalt-Iron Oxide Nanosheets to Enhance O-O Coupling in the Oxygen Evolution Reaction

The electrochemical oxygen evolution reaction (OER) plays a fundamental role in several energy technologies, which performance and cost-effectiveness are in large part related to the used OER electrocatalyst. Herein, we detail the synthesis of cobalt-iron oxide nanosheets containing controlled amounts of well-anchored SO₄^2- anionic groups (CoFe_xO_y-SO₄). We use a cobalt-based zeolitic imidazolate framework (ZIF-67) as the structural template and a cobalt source and Mohr's salt ((NH₄)₂Fe(SO₄)₂·6H₂O) as the source of iron and sulfate. When combining the ZIF-67 with ammonium iron sulfate, the protons produced by the ammonium ion hydrolysis (NH₄⁺ + H₂O = NH₃·H₂O + H⁺) etch the ZIF-67, dissociating its polyhedron structure, and form porous assemblies of two-dimensional nanostructures through a diffusion-controlled process. At the same time, iron ions partially replace cobalt within the structure, and SO₄^2- ions are anchored on the material surface by exchange with organic ligands. As a result, ultrathin CoFe_xO_y-SO₄ nanosheets are obtained. The proposed synthetic procedure enables controlling the amount of Fe and SO₄ ions and analyzing the effect of each element on the electrocatalytic activity. The optimized CoFe_xO_y-SO₄ material displays outstanding OER activity with a 10 mA cm^-2 overpotential of 268 mV, a Tafel slope of 46.5 mV dec^-1, and excellent stability during 62 h. This excellent performance is correlated to the material's structural and chemical parameters. The assembled nanosheet structure is characterized by a large electrochemically active surface area, a high density of reaction sites, and fast electron transportation. Meanwhile, the introduction of iron increases the electrical conductivity of the catalysts and provides fast reaction sites with optimum bond energy and spin state for the adsorption of OER intermediates. The presence of sulfate ions at the catalyst surface modifies the electronic energy level of active sites, regulates the adsorption of intermediates to reduce the OER overpotential, and promotes the surface charge transfer, which accelerates the formation of oxygenated intermediates. Overall, the present work details the synthesis of a high-efficiency OER electrocatalyst and demonstrates the introduction of nonmetallic anionic groups as an excellent strategy to promote electrocatalytic activity in energy conversion technologies.

Durable Nickel-Iron (Oxy)hydroxide Oxygen Evolution Electrocatalysts through Surface Functionalization with Tetraphenylporphyrin

NiFe-based oxides are one of the best-known active oxygen evolution electrocatalysts. Unfortunately, they rapidly lost performance in Fe-purified KOH during the reaction. Herein, tetraphenylporphyrin (TPP) was loaded on a catalyst/electrolyte interface to alleviate the destabilization of NiFe (oxy)hydroxide. We propose that the degradation occurs primarily due to the release of thermodynamically unstable Fe. TPP acts as a protective layer and suppresses the dissolution of hydrated metal at the catalyst/electrolyte interface. In the electric double layer, the nonpolar TPP layer on the NiFe surface also invigorates the redeposition of the active site, Fe, which leads to prolonging the lifetime of NiFe. The TPP-coated NiFe was demonstrated in anion exchange membrane water electrolysis, where hydrogen was generated at a rate of 126 L h^-1 for 115 h at a 1.41 mV h^-1 degradation rate. Consequently, TPP is a promising protective layer that could stabilize oxygen evolution electrocatalysts.

Self-Reconstructed Metal-Organic Framework Heterojunction for Switchable Oxygen Evolution Reaction

Designing metal-organic framework (MOF)-based catalysts with superior oxygen evolution reaction (OER) activity and robust durability simultaneously is highly required yet very challenging due to the limited intrinsic activity and their elusive evolution under harsh OER conditions. Herein, a steady self-reconstructed MOF heterojunction is constructed via redox electrochemistry and topology-guided strategy. Thanks to the inhibiting effect from hydrogen bonds of Ni-BDC-1 (BDC=1,4-benzenedicarboxylic acid), the obatained MOF heterojunction shows greatly improved OER activity with low overpotential of 225 mV at 10 mA cm^-2 , relative to the totally reconstructed Ni-BDC-3 (332 mV). Density function theory calculations reveal that the formed built-in electric field in the MOF heterojunction remarkably optimizes the ad/desorption free energy of active Ni sites. Moreover, such MOF heterojunction shows superior durability attributed to the shielding effect of the surface-evolved NiOOH coating.

Enhanced Electrocatalytic Water Oxidation of Ultrathin Porous Co3O4 Nanosheets by Physically Mixing with Au Nanoparticles

Ultrathin porous Co₃O₄ nanosheets are synthesized successfully, the thickness of which is about three unit-cell dimensions. The enhanced oxygen evolution reaction (OER) performance and electronic interaction between Co₃O₄ and Au is firstly reported in Co₃O₄ ultrathin porous nanosheets by physically mixing with Au nanoparticles. With the loading of the Au nanoparticles, the current density of ultrathin porous Co₃O₄ nanosheets is enhanced from 9.97 to 14.76 mA cm^-2 at an overpotential of 0.5 V, and the overpotential required for 10 mA cm^-2 decreases from 0.51 to 0.46 V, smaller than that of commercial IrO₂ (0.54 V). Furthermore, a smaller Tafel slope and excellent durability are also obtained. Raman spectra, XPS measurement, and X-ray absorption near edge structure spectra (XANES) show that the enhanced OER ascribed to a higher Co²⁺/Co³⁺ ratio and quicker charge transfer due to the electronic interaction between Au and ultrathin Co₃O₄ nanosheets with low-coordinated surface, and Co²⁺ ions are beneficial for the formation of CoOOH active sites.

Fast-Charging Zn-Air Batteries with Long Lifetime Enabled by Reconstructed Amorphous Multi-Metallic Sulfide

Developing fast-charging Zn-air batteries is crucial for widening their application but remains challenging owing to the limitation of sluggish oxygen evolution reaction (OER) kinetics and insufficient active sites of electrocatalysts. To solve this issue, a reconstructed amorphous FeCoNiS_x electrocatalyst with high density of efficient active sites, yielding low OER overpotentials of 202, 255, and 323 mV at 10, 100, and 500 mA cm^-2 , respectively, is developed for fast-charging Zn-air batteries with low charging voltages at 100-400 mA cm^-2 . Furthermore, the fabricated 3241.8 mAh (20 mA cm^-2 , 25 °C) quasi-solid Zn-air battery shows long lifetime of 500 h at -10 and 25 °C as well as 150 h at 40 °C under charging 100 mA cm^-2 . The detailed characterizations combine with density functional theory calculations indicate that the defect-rich crystalline/amorphous ternary metal (oxy)hydroxide forms by the reconstruction of amorphous multi-metallic sulfide, where the electron coupling effect among multi-active sites and migration of intermediate O* from Ni site to the Fe site breaks the scaling relationship to lead to a low theoretical OER overpotential of 170 mV, accounting for the outstanding fast-charging property. This work not only provides insights into designing advanced OER catalysts by the self-reconstruction of the pre-catalyst but also pioneers a pathway for practical fast-charging Zn-air batteries.

Effect of Surface‐Adsorbed and Intercalated (Oxy)anions on the Oxygen Evolution Reaction

As the kinetically demanding oxygen evolution reaction (OER) is crucial for the decarbonization of our society, a wide range of (pre)catalysts with various non‐active‐site elements (e.g., Mo, S, Se, N, P, C, Si…) have been investigated. Thermodynamics dictate that these elements oxidize during industrial operation. The formed oxyanions are water soluble and thus predominantly leach in a reconstruction process. Nevertheless, recently, it was unveiled that these thermodynamically stable (oxy)anions can adsorb on the surface or intercalate in the interlayer space of the active catalyst. There, they tune the electronic properties of the active sites and can interact with the reaction intermediates, changing the OER kinetics and potentially breaking the persisting OER *OH/*OOH scaling relations. Thus, the addition of (oxy)anions to the electrolyte opens a new design dimension for OER catalysis and the herein discussed observations deepen the understanding of the role of anions in the OER.

A sulfur defective Mn-doped Ni3S2-xnanosheet for enhanced overall water splitting

Non-precious and stable electrocatalysts towards both oxygen and hydrogen evolution reaction (OER/HER) are essential for effective overall water splitting in alkaline solution. In this study, a sulfur defective and manganese-doped nickel sulfide nanosheet that uniformly grown on nickel foam substrate (Mn-Ni₃S_2-x@NF) is synthesized. In alkaline solution, the Mn-Ni₃S_2-x@NF showed a low overpotential of 76 and 110 mV for OER and HER at 10 mA cm^-2, respectively, together exhibiting excellent stability for both OER and HER reaction. It was confirmed by the experimental results that sulfur defects and Mn-doping synergistically optimized the electronic structure of Mn-Ni₃S_2-xwith increased electrical conductivity and enhanced OER/HER activity. Moreover, amorphous nickel oxyhydroxide (NiOOH) was observed byin situRaman during the OER condition, suggesting NiOOH is the active phase for OER reaction. Furthermore, the electrolyzer assembled by Mn-Ni₃S_2-x@NF merely needs 1.46 V to reach 10 mA cm^-2and shows good stability as well. This study provides a feasible way to prepare high-efficiency bifunctional catalysts for overall water splitting.

Solid-State Reaction Synthesis of Nanoscale Materials: Strategies and Applications

Nanomaterials (NMs) with unique structures and compositions can give rise to exotic physicochemical properties and applications. Despite the advancement in solution-based methods, scalable access to a wide range of crystal phases and intricate compositions is still challenging. Solid-state reaction (SSR) syntheses have high potential owing to their flexibility toward multielemental phases under feasibly high temperatures and solvent-free conditions as well as their scalability and simplicity. Controlling the nanoscale features through SSRs demands a strategic nanospace-confinement approach due to the risk of heat-induced reshaping and sintering. Here, we describe advanced SSR strategies for NM synthesis, focusing on mechanistic insights, novel nanoscale phenomena, and underlying principles using a series of examples under different categories. After introducing the history of classical SSRs, key theories, and definitions central to the topic, we categorize various modern SSR strategies based on the surrounding solid-state media used for nanostructure growth, conversion, and migration under nanospace or dimensional confinement. This comprehensive review will advance the quest for new materials design, synthesis, and applications.

Coordination environment tuning of nickel sites by oxyanions to optimize methanol electro-oxidation activity

To achieve zero-carbon economy, advanced anode catalysts are desirable for hydrogen production and biomass upgrading powered by renewable energy. Ni-based non-precious electrocatalysts are considered as potential candidates because of intrinsic redox attributes, but in-depth understanding and rational design of Ni site coordination still remain challenging. Here, we perform anodic electrochemical oxidation of Ni-metalloids (NiP_x, NiS_x, and NiSe_x) to in-situ construct different oxyanion-coordinated amorphous nickel oxyhydroxides (NiOOH-TO_x), among which NiOOH-PO_x shows optimal local coordination environment and boosts electrocatalytic activity of Ni sites towards selective oxidation of methanol to formate. Experiments and theoretical results demonstrate that NiOOH-PO_x possesses improved adsorption of OH* and methanol, and favors the formation of CH₃O* intermediates. The coordinated phosphate oxyanions effectively tailor the d band center of Ni sites and increases Ni-O covalency, promoting the catalytic activity. This study provides additional insights into modulation of active-center coordination environment via oxyanions for organic molecules transformation.

Coordination environments around metal sites are important in electrocatalysis. Here, Ni metalloid oxidation produces oxyanion doped amorphous Ni-oxyhydroxides where substitution with phosphorus is found to boost methanol electrooxidation activity.

In situ Raman spectroscopy reveals the structure evolution and lattice oxygen reaction pathway induced by the crystalline-amorphous heterojunction for water oxidation

One of the most successful approaches for balancing the high stability and activity of water oxidation in alkaline solutions is to use amorphous and crystalline heterostructures. However, due to the lack of direct evidence at the molecular level, the nano/micro processes of amorphous and crystalline heterostructure electrocatalysts, including self-reconstruction and reaction pathways, remain unknown. Herein, the Leidenfrost effect assisted electrospray approach combined with phase separation was used for the first time to create amorphous NiO_x/crystalline α-Fe₂O₃ (a-NiO_x/α-Fe₂O₃) nanowire arrays. The results of in situ Raman spectroscopy demonstrate that with the increase of the potential at the a-NiO_x/α-Fe₂O₃ interface, a significant accumulation of OH can be observed. Combining with XAS spectra and DFT calculations, we believe that more OH adsorption on the Ni centers can facilitate Ni²⁺ deprotonation to achieve the high-valence oxidation of Ni⁴⁺ according to HSAB theory (Fe³⁺ serves as a strong Lewis acid). This result promotes the electrocatalysts to follow the lattice oxygen activation mechanism. This work, for the first time, offers direct spectroscopic evidence for deepening the fundamental understanding of the Lewis acid effect of Fe³⁺, and reveals the synergistic effect on water oxidation via the unique amorphous and crystalline heterostructures.

The amorphous NiO_x/crystalline α-Fe₂O₃ heterojunctions were constructed and exhibited outstanding OER activities. Through the collaboration of multiple characterization techniques, the Lewis acid effect of Fe³⁺ was revealed at molecular level.

Fe and P dual-doped nickel carbonate hydroxide/carbon nanotube hybrid electrocatalysts for an efficient oxygen evolution reaction

Designing cost-effective and highly active oxygen evolution reaction (OER) electrocatalysts is critical for large-scale hydrogen production from electrocatalytic water splitting. Herein, Fe and P dual-doped nickel carbonate hydroxide/carbon nanotubes (Fe, P-NiCH/CNTs) were fabricated through a solvothermal method. By virtue of the optimized electronic structure, improved conductivity and enriched active sites, the as-fabricated Fe, P-NiCH/CNT hybrid electrocatalyst exhibits superior OER activity, with a low overpotential of 222 mV at 20 mA cm^-2 and robust durability, confirming its potential as a highly efficient OER electrocatalyst. Moreover, theoretical calculations demonstrate that the doped Fe and surface adsorbed PO₄^3- can regulate the electronic structure of evolved NiOOH and decrease the energy barrier of the rate-determining step, thus leading to improved OER activity. The strategy presented in this work can also be employed to fabricate other transition metal carbonate hydroxides for various electrocatalytic applications.

The Pivotal Role of s-, p-, and f-Block Metals in Water Electrolysis: Status Quo and Perspectives

Transition metals, in particular noble metals, are the most common species in metal-mediated water electrolysis because they serve as highly active catalytic sites. In many cases, the presence of nontransition metals, that is, s-, p-, and f-block metals with high natural abundance in the earth-crust in the catalytic material is indispensable to boost efficiency and durability in water electrolysis. This is why alkali metals, alkaline-earth metals, rare-earth metals, lean metals, and metalloids receive growing interest in this research area. In spite of the pivotal role of these nontransition metals in tuning efficiency of water electrolysis, there is far more room for developments toward a knowledge-based catalyst design. In this review, five classes of nontransition metals species which are successfully utilized in water electrolysis, with special emphasis on electronic structure-catalytic activity relationships and phase stability, are discussed. Moreover, specific fundamental aspects on electrocatalysts for water electrolysis as well as a perspective on this research field are also addressed in this account. It is anticipated that this review can trigger a broader interest in using s-, p-, and f-block metals species toward the discovery of advanced polymetal-containing electrocatalysts for practical water splitting.

Research progress in improving the oxygen evolution reaction by adjusting the 3d electronic structure of transition metal catalysts

As a clean and renewable energy carrier, hydrogen (H₂) has become an attractive alternative to dwindling fossil fuels. The key to realizing hydrogen-based energy systems is to develop efficient and economical hydrogen production methods. The water electrolysis technique has the advantages of cleanliness, sustainability, and high efficiency, which can be applied to large-scale hydrogen production. However, the electrocatalytic oxygen evolution reaction (OER) at the anode plays a decisive role in the efficiency of hydrogen evolution during water splitting. Generally, noble metal catalysts (such as ruthenium and iridium) are considered to exhibit the best OER performance; however, they exhibit disadvantages such as high costs, limited reserves, and poor stability. Therefore, the research on highly efficient non-noble metal catalysts that can replace their noble metal counterparts has always been important. This review presents the recent advances in the preparation of high-performance OER electrocatalysts by regulating the electronic structure of 3d transition metals. First, we introduce the reaction mechanism of water splitting and the OER, which reveals the high requirement of the complex four-electron process of the OER. Second, the electron transfer mode and development progress of highly active transition metal electrocatalysts are used to summarize the research situation of transition metal OER catalysts in water splitting. Finally, the future development direction and challenges of transition metal catalysts are prospected based on the current research progress.

Ternary Mo2 NiB2 as a Superior Bifunctional Electrocatalyst for Overall Water Splitting

Transition metal borides are considered as promising electrocatalysts for water splitting due to their metallic conductivity and good durability. However, the currently reported monometallic and noncrystalline multimetallic borides only show generic and monofunctional catalytic activity. In this work, the authors design and successfully synthesize highly crystalline ternary borides, Mo₂ NiB₂ , via a facile solid-state reaction from pure elemental powders. The as-synthesized Mo₂ NiB₂ exhibits very low overpotentials for both the oxygen evolution reaction (OER) and hydrogen evolution reaction (HER), that is, 280 and 160 mV to reach a current density of 10 mA cm^-2 , in alkaline media. These values are much lower from the ones observed over monometallic borides, that is, Ni₂ B and MoB, and the lowest among all nonprecious metal borides. By loading Mo₂ NiB₂ onto Ni foams as both cathode and anode electrode for overall water splitting applications, a low cell voltage of 1.57 V is required to achieve a current density of 10 mA cm^-2 , comparable with the value required from the Pt/C||IrO₂ /C couple (1.56 V). The proposed synthesis strategy can be used for the preparation of cost-effective, multi-metallic crystalline borides, as multifunctional electrocatalysts.

A Substrate-Induced Fabrication of Active Free-Standing Nanocarbon Film as Air Cathode in Rechargeable Zinc-Air Batteries

Designing cost-effective and high-efficiency bifunctional electrocatalysts for both oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) occurred at air electrodes is vitally significant yet challenging for Zn-air batteries (ZABs). In this work, a zinc substrate induced fabrication is reported of free-standing nanocarbon hybrid film which shows good bifunctional activity and can be directly used as the air electrode in the rechargeable ZABs. The designed nanocarbon film in Zn-air battery provides a satisfactory power density of 185 mW cm^-2 and cycling stability for 1200 h under the current density of 10 mA cm^-2 . This hybrid film also gives a solid-state ZAB excellent flexibility with a power density of 160 mW cm^-2 . The free-standing hybrid with abundant cobalt-nitrogen-carbon species coupled with porous architecture would be the original factor for its satisfactory performance of rechargeable ZABs. This work would pave an ideal way to design integrated electrode with high electrocatalytic performance towards electrochemical energy technologies.

Triple captured iron by defect abundant NiO for efficient water oxidation

Fe-doped NiO host in well-defined nanorod assembly (Fe-NiMoO4@NiO-30) with large surface area is designed to achieve the triple capture of Fe via adjustable surface reconstruction and impregnation to optimize OER...