Sensitive and Repeatable Photoinduced Luminescent Radicals from A Simple Organic Crystal

Supramolecular Chiral Aggregation of Porphyrin Induced by Photo-Generated Triphenylamines Radical Cations

Here, it is shown that photoirradiation triggered chiral J-aggregates formation of an achiral anionic porphyrin, TPPS (tetrakis(4-sulfonatophenyl) porphyrin), in the presence of chiral triphenylamine (TPA) derivatives. A series of chiral triarylamines linked with aromatic rings is designed through urea or amide bonds. UV-irradiation of self-assembled urea-linked triphenylamine derivatives causes the formation of persistent radical cations in the chlorinated solvents, which subsequently induces the aggregation of TPPS. Transferring chirality of TPA derivatives to achiral TPPS J-aggregates leads to the chiral assemblies with remarkable chiroptical signals. The experimental results demonstrate that, TPA derivatives linked by the urea bond can effectively promote the aggregation of TPPS rather than those with the amide bond although the photo-generated radical cations are both produced. It is suggested that the urea-linked TPA derivatives are more favorable to stable radical cations and thus cause the formation of TPPS chiral J-aggregation. This work may open up an avenue for designing photo-modulated chiral supramolecular assemblies.

Fabrication of Large-Area Multi-Stimulus Responsive Thin Films via Interfacially Confined Irreversible Katritzky Reaction

Fabrication of large-area thin films through irreversible reactions remains a formidable task. This study reports a breakthrough strategy for in situ synthesis of large-area, free-standing, robust and multi-stimulus responsive thin films through a catalyst-free and irreversible Katritzky reaction at a liquid-liquid interface. The as resulted films are featured with adjustable thickness of 1-3 μm and an area up to 50 cm2. The thin films exhibit fast photo-mechanical motions (a response time of ca 0.1 s), vapor-mechanical motions, as well as photo-chromic and solvato-chromic behaviors. It was revealed that the reason behind the observable motions is proton transfer from the imine groups to the carbonyl structures within the film induced by photo- and/or dimethyl sulfoxide-stimulus. In addition, the films can harvest anionic radicals and the radicals as captured can be efficiently degraded under UV light illumination. This study provides a new strategy for fabricating smart thin films via interfacially confined irreversible Katritzky reaction.

Photochromic luminescence of organic crystals arising from subtle molecular rearrangement

Photoluminescence (PL) colour-changing materials in response to photostimulus play an increasingly significant role in intelligent applications for their programmability. Nevertheless, current research mainly focuses on photochemical processes, with less attention to PL transformation through uniform aggregation mode adjustment. Here we show photochromic luminescence in organic crystals (e.g. dimethyl terephthalate) with PL varying from dark blue to purple, then to bright orange-red, and finally to red. This change is attributed to the emergence of clusters with red emission, which is barely achieved in single-benzene-based structures, thanks to the subtle molecular rearrangements prompted by light. Crucial to this process are the through-space electron interactions among molecules and moderate short contacts between ester groups. The irradiated crystals exhibit reversible PL transformation upon sufficient relaxation, showing promising applications in information storage and smart optoelectronic devices. This research contributes to the development of smart photochromic luminescent materials with significant PL colour transformations through molecular rearrangement.

Switchable Anisotropic/Isotropic Photon Transport in a Double-Dipole Metal-Organic Framework via Radical-Controlled Energy Transfer

Directional control of photon transport at micro/nanoscale holds great potential in developing multifunctional optoelectronic devices. Here, the switchable anisotropic/isotropic photon transport is reported in a double-dipole metal-organic framework (MOF) based on radical-controlled energy transfer. Double-dipole MOF microcrystals with transition dipole moments perpendicular to each other have been achieved by the pillared-layer coordination strategy. The energy transfer between the double dipolar chromophores can be modulated by the photogenerated radicals, which permits the in situ switchable output on both polarization (isotropy/anisotropy state) and wavelength information (blue/red-color emission). On this basis, the original MOF microcrystal with isotropic polarization state displays the isotropic photon transport and similar reabsorption losses at various directions, while the radical-affected MOF microcrystal with anisotropic polarization state shows the anisotropic photon transport with distinct reabsorption losses at different directions, finally leading to the in situ switchable anisotropic/isotropic photon transport. These results offer a novel strategy for the development of MOF-based photonic devices with tunable anisotropic performance.

Flexible Organic Chiral Crystals with Thermal and Excitation Modulation of the Emission for Information Transmission, Writing, and Storage

Organic single crystals quickly emerge as dense yet light and nearly defect-free media for emissive elements. Integration of functionalities and control over the emissive properties is currently being explored for a wide range of these materials to benchmark their performance against organic emissive materials diluted in powders or films. Here, we report mechanically flexible emissive chiral organic crystals capable of an unprecedented combination of fast, reversible, and low-fatigue responses. UV-excited single crystals of both enantiomers of the material, 4-chloro-2-(((1-phenylidene)imino)methyl)phenol, exhibit a drastic yet reversible change in the emission color from green to orange-yellow within a second and can be cycled at least 2000 times. The photoresponse was found to depend strongly on the excitation intensity and temperature. Combining chirality, mechanical compliance, rapid emission switching, multiple responses, and writability by UV light, this material provides a unique and versatile platform for developing organic crystal-based materials for on-demand signal transfer, information storage, and cryptography.

Luminescent Radicals

Organic radicals are attracting increasing interest as a new class of molecular emitters. They demonstrate electronic excitation and relaxation dynamics based on their doublet or higher multiplet spin states, which are different from those based on singlet-triplet manifolds of conventional closed-shell molecules. Recent studies have disclosed luminescence properties and excited state dynamics unique to radicals, such as highly efficient electron-photon conversion in OLEDs, NIR emission, magnetoluminescence, an absence of heavy atom effect, and spin-dependent and spin-selective dynamics. These are difficult or sometimes impossible to achieve with closed-shell luminophores. This review focuses on luminescent organic radicals as an emerging photofunctional molecular system, and introduces the material developments, fundamental properties including luminescence, and photofunctions. Materials covered in this review range from monoradicals, radical oligomers, and radical polymers to metal complexes with radical ligands demonstrating radical-involved emission. In addition to stable radicals, transiently formed radicals generated in situ by external stimuli are introduced. This review shows that luminescent organic radicals have great potential to expand the chemical and spin spaces of luminescent molecular materials and thus broaden their applicability to photofunctional systems.

Photoinduced Carbonyl Radical Luminescence in Host-Guest Systems

Developing a free radical emission system in different states, especially in water, is highly challenging and desired. Herein, a host-guest coassembly strategy was used to protect the in situ photoactivated radical emission of carbonyl compounds in solid and aqueous solutions by doping them into a series of small molecules with hydroxyl groups. The intermolecular interactions between host and guest and the electron-donating ability of the hydroxyl group can significantly promote the formation and stabilization of luminescence by carbonyl radicals. Accordingly, the stimuli-responsive property of the free radical system was investigated in detail, and the self-assembled aggregates showed photoactive and thermoresponsive behaviors. In addition, an advanced ammonia compound identification system can be built based on a radical emission system. Our design strategy sheds light on developing free radical systems that can emit in various states, which will greatly broaden the application range of free radicals.

A Photoactivatable Luminescent Motif through Ring-Flipping Isomerization for Multiple Photopatterning

Photoactivatable luminescent materials have garnered enormous attention in the field of intelligent responsive materials, yet their design and applications remain challenging due to the limited variety of photoactivatable motifs. In the work described herein, we discovered a new photoactivatable luminescent motif that underwent ring-flipping isomerization under UV irradiation. The emission of this motif exhibited a rapid transformation from dark yellow to bright green, accompanied by a significant enhancement of quantum yield from 1.9% to 34.2%. Experimental and theoretical studies revealed that the effective intramolecular motion (EIM) was crucial to the distinct luminescence performance between two isomers. In addition, polymers containing this motif were achieved through a one-pot alkyne polymerization, exhibiting both photofluorochromic and photo-cross-linking properties. Furthermore, multiple types of photopatterning, including luminescent encryption, fluorescent grayscale imaging, and high-resolution photolithographic patterns, were realized. This work developed a new photoactivatable luminescent motif and demonstrated its potential applications in both small molecules and macromolecules, which will help in the future design of photoactivatable luminescent materials.

A Highly Luminescent Metallo-Supramolecular Radical Cage

Luminescent metal-radicals have recently received increasing attention due to their unique properties and promising applications in materials science. However, the luminescence of metal-radicals tends to be quenched after formation of metallo-complexes. It is challenging to construct metal-radicals with highly luminescent properties. Herein, we report a highly luminescent metallo-supramolecular radical cage (LMRC) constructed by the assembly of a tritopic terpyridinyl ligand RL with tris(2,4,6-trichlorophenyl)methyl (TTM) radical and Zn2+. Electrospray ionization-mass spectrometry (ESI-MS), traveling-wave ion mobility-mass spectrometry (TWIM-MS), X-ray crystallography, electron paramagnetic resonance (EPR) spectroscopy, and superconducting quantum interference device (SQUID) confirm the formation of a prism-like supramolecular radical cage. LMRC exhibits a remarkable photoluminescence quantum yield (PLQY) of 65%, which is 5 times that of RL; meanwhile, LMRC also shows high photostability. Notably, significant magnetoluminescence can be observed for the high-concentration LMRC (15 wt % doped in PMMA film); however, the magnetoluminescence of 0.1 wt % doped LMRC film vanishes, revealing negligible spin-spin interactions between two radical centers in LMRC.

Highly Efficient Room-Temperature Light-Induced Synthesis of Polymer Dots: A Programming Control Paradigm of Polymer Nanostructurization from Single-Component Precursor

Polymer dots (PDs) have raised considerable research interest due to their advantages of designable nanostructures, high biocompatibility, versatile photoluminescent properties, and recyclability as nanophase. However, there remains a lack of in situ, real-time, and noncontact methods for synthesizing PDs. Here we report a rational strategy to synthesize PDs through a well-designed single-component precursor (an asymmetrical donor-acceptor-donor' molecular structure) by photoirradiation at ambient temperature. In contrast to thermal processes that normally lack atomic economy, our method is mild and successive, based on an aggregation-promoted sulfonimidization triggered by photoinduced delocalized intrinsic radical cations for polymerization, followed by photooxidation for termination with structural shaping to form PDs. This synthetic approach excludes any external additives, rendering a conversion rate of the precursor exceeding 99%. The prepared PDs, as a single entity, can realize the integration of nanocore luminescence and precursor-transferred luminescence, showing 41.5% of the total absolute luminescence quantum efficiency, which is higher than most reported PD cases. Based on these photoluminescent properties, together with the superior biocompatibility, a unique membrane microenvironmental biodetection could be exemplified. This strategy with programming control of the single precursor can serve as a significant step toward polymer nanomanufacturing with remote control, high-efficiency, precision, and real-time operability.

Sequential-Stimuli Induced Stepwise-Response of Pyridylpyrenes

Stimuli-responsive materials, especially multi-stimuli-responsive materials, can sense external stimuli such as light, heat, and force, have shown great potential in drug delivery, data storage, encryption, energy-harvesting, and artificial intelligence. Conventional multi-stimuli-responsive materials are sensitive to each independent stimulus, causing losses in the diversity and accuracy of the identification for practical application. Herein, a unique phenomenon of sequential-stimuli induced stepwise-response generated from elaborately designed single-component organic materials is reported, which shows large bathochromic shifts up to 5800 cm-1 under sequential stimuli of force and light. In contrast to multi-stimuli-responsive materials, the response of these materials strictly relies on the sequence of stimuli, allowing logicality, rigidity, and accuracy to be integrated into one single-component material. The molecular keypad lock is built based on these materials, pointing promising to a future for this logical response in significant practical applications. This breakthrough gives a new drive to classical stimuli-responsiveness and provides a fundamental design strategy for new generations of high-performance stimuli-responsive materials.

Photoinduced Radical Persistent Luminescence in Semialiphatic Polyimide System with Temperature and Humidity Resistance

Organic persistent luminescence (pL) systems with photoresponsive dynamic features have valuable applications in the fields of data encryption, anticounterfeiting, and bioimaging. Photoinduced radical luminescent materials have a unique luminous mechanism with the potential to achieve dynamic pL. It is extremely challenging to obtain radical pL under ambient conditions; on account of it, it is unstable in air. Herein, a new semialiphatic polyimide-based polymer (A0) is developed, which can achieve dynamic pL through reversible conversion of radical under photoexcitation. A "joint-donor-spacer-acceptor" molecular design strategy is applied to effectively modulate the intramolecular charge-transfer and charge-transfer complex interactions, resulting in effective protection of the radical generated under photoirradiation. Meanwhile, polyimide-based polymers of A1-A4 are obtained by doping different amine-containing fluorescent dyes to modulate the dynamic afterglow color from green to red via the triplet to singlet Förster resonance energy-transfer pathway. Notably, benefiting from the structural characteristics of the polyimide-based polymer, A0-A4 have excellent processability, thermal stability, and mechanical properties and can be applied directly in extreme environments such as high temperatures and humidity.

Iminyl-Radical-Mediated Formation of Covalent Au-N Bonds for Molecular Junctions

The interaction between organic radicals and transition metals plays a crucial role in radical-mediated chemical reactions, functional devices, and biocatalysis. Characterizing such interactions, however, remains a long-standing challenge due to the inherently high reactivity of radical species. Here, using a scanning tunneling microscope breaking junction (STM-BJ) technique, we are able to detect the interaction mode between iminyl radicals and the gold surface at a single molecule level. We show that the free iminyl radicals generated through photochemical N-O bond homolysis of oxime esters react toward the gold electrode surface and produce covalent Au-N bonds. Intriguingly, we find that the Au-N bonding reactions lead to the formation of robust and highly conductive single-molecule junctions. These findings provide not only insights into the mechanism of iminyl-radical-involved reactions but also a facile photolysis method to create a new type of covalent electrode-molecule bonding contact for molecular devices.

Manipulating D-A interaction to achieve stable photoinduced organic radicals in triphenylphosphine crystals

New strategies for the design and synthesis of stable organic radicals without additives are highly desirable. Herein, we design a series of donor-acceptor structured triarylphosphines and disclose the fast color change triggered by UV-irradiation in the crystalline state. Photoinduced organic radicals are undoubtedly verified and proved to be the reason for the color change by time-dependent and quantitative electron paramagnetic resonance analysis, X-ray crystallographic analysis, and theoretical calculations. It is revealed that the intrinsic symmetry breaking of peripheral architecture helps to form continuous molecular chains by donor-acceptor counterpart pairing. Intermolecular electron-transfer occurs among molecular chains and results in radical ion pairs upon photoirradiation.

Photo-controllable Luminescence from Radicals Leading to Ratiometric Emission Switching via Dynamic Intermolecular Coupling

The development of photoinduced luminescent radicals with dynamic emission color is still challenging. Herein we report a novel molecular radical system (TBIQ) that shows photo-controllable luminescence, leading to a wide range of ratiometric color changes via light excitation. The conjugated skeleton of TBIQ is decorated with steric-demanding tertiary butyl groups that enable appropriate intermolecular interaction to make dynamic intermolecular coupling possible for controllable behaviors. We reveal that the helicenic pseudo-planar conformation of TBIQ experiences a planarization process after light excitation, leading to more compactly stacked supermolecules and thus generating radicals via intermolecular charge transfer. The photo-controllable luminescent radical system is employed for a high-level information encryption application. This study may offer unique insight into molecular dynamic motion for optical manufacturing and broaden the scope of smart-responsive materials for advanced applications.

Luminescent Crystalline Carbon- and Nitrogen-Centered Organic Radicals Based on N-Heterocyclic Carbene-Triphenylamine Hybrids

Developing luminescent radicals with tunable emission is a challenging task due to the limitation of alternative skeletons. Herein, a series of carbene-triphenylamine hybrids were prepared by the direct C2-arylation of N-heterocyclic carbenes with 4-bromo-N,N-bis(4-methoxyphenyl)aniline. These hybrids showed multiple redox-active properties and could be converted to carbon-centered luminescent radicals with blue-to-cyan emissions (λ_max : 436-486 nm) or nitrogen-centered luminescent radicals with orange emissions (λ_max : 590-623 nm) through chemical reduction or oxidation, respectively. The radical species were characterized by electron paramagnetic resonance spectroscopy, ultraviolet-visible spectroscopy, and single-crystal X-ray diffractometry analysis. Notably, the corresponding nitrogen-centered radicals exhibited good stability in atmospheric air, and their thermal decomposition temperatures were determined to be above 200 °C. In addition, spectral and theoretical calculations indicate that all radicals exhibit anti-Kasha emissions.

Aggregation Effect on Multiperformance Improvement in Aryl-Armed Phenazine-Based Emitters

The concept of aggregate science was proposed to explain changes in materials performance that accompany the generation of aggregates, but aggregation-triggered multifunction improvements in a class of materials have rarely been reported. Herein, we present the first report of a new class of multifunctional aggregation-induced emission (AIE) luminogens (AIEgens) based on 5,10-diarylphenazine (DPZ) derivates with full-wavelength emission. Intriguingly, multiple properties, such as fluorescence intensity and free radical and type I reactive oxygen species (ROS) efficiencies, could be simultaneously activated from the unimolecular level to the aggregate state. The mechanisms of this multiple performance improvement are discussed in detail based on sufficient performance characterization, and some of the newly prepared AIEgens exhibited toxicity to cancer cells during photodynamic therapy. This work systematically demonstrates the positive effect of aggregation on improving multiple functions of materials, which is expected to promote the development of aggregate science theory for the design of multifunctional materials.

Iridium(III) Complex Radical and Corresponding Ligand Radical Functionalized by a Tris(2,4,6-trichlorophenyl)methyl Unit: Synthesis, Structure, and Photophysical Properties

Organic radical luminescent materials with doublet excited state character based on tris(2,4,6-trichlorophenyl)methyl (TTM) have attracted extensive attention in recent years. However, how they affect the phosphorescent iridium(III) complex characterized by the triplet excited state has not been studied yet. Herein, a new iridium(III) complex radical (Ir-TTM) and corresponding ligand radical (ppy-TTM) with a TTM unit have been designed and synthesized, and their radical properties were confirmed by the single crystal structure and EPR spectra. Notably, the ligand radical ppy-TTM shows an efficient red light emission, whereas the iridium complex radical Ir-TTM emits no light, which resulted from the intramolecular quenching effect of the TTM radical unit on the iridium luminescence center. DFT calculations demonstrate that the lowest doublet (D₁) excited state of ppy-TTM shows an intramolecular charge transfer character from the 2-phenylpyridine moieties to the TTM unit, whereas the D₁ of Ir-TTM exhibits a significant charge transfer character from the iridium luminescence center moieties to the TTM unit, which further explains the luminescence quenching mechanism of the phosphorescent iridium complex radical.

More than Carbazole Derivatives Activate Room Temperature Ultralong Organic Phosphorescence of Benzoindole Derivatives

The mechanism of carbazole (Cz)-based phosphors is still unclear since its isomer (1H-benzo[f]indole, Bd) is discovered in 2020. Herein, the successful synthesis of four Cz/Bd derivatives is reported, named as 2CzBr, CzBdBr, 2BdBr, and 3Bd, and the general mechanism for their ultralong organic phosphorescence (UOP) is provided. Bd and its derivatives give double groups of phosphorescence, including the short-wavelength phosphorescence with a short lifetime and the ultralong phosphorescence at long wavelengths, assigned to their neutral molecules and radical cations, respectively. Interestingly, the doped poly(methyl methacrylate) (PMMA) films of CzBdBr and 2BdBr show photo-activated ultralong phosphorescence at room temperature. The activation of Bd derivatives 'UOP involves three factors: 1) well dispersion in the matrix with limited amount, 2) generation of their radical cations and 3) the matrix-mediated stabilization of radical cations. The function of Cz derivatives to activate the Bd derivatives' UOP could be replaced by photo-activation or using other matrixes. Significantly, the application of the doped PMMA films is practiced and gives an exciting result that the high-resolution QR code could be reversibly printed and erased on the film. This research has expanded the understanding in the field of organic phosphorescence and it may pave a new way for its development.

Turn-up Luminescent Sensing of Ultraviolet Radiation by Lanthanide Metal-Organic Frameworks

Here, we report a series of two-dimensional lanthanide metal-organic frameworks Ln-DBTPA (where DBTPA = 2,5-dibromoterephthalic acid and Ln = Tb (1), Eu (2), or Gd (3)) showing a unique turn-up responsiveness toward ultraviolet (UV) radiation. The luminescence enhancement was derived from the accumulated radicals that can promote the intersystem crossing process. The compound 1 shows an ultralow detection limit of 9.1 × 10^-9 J toward UV radiation, representing a new type of luminescent UV detectors.

Research Progress on Triarylmethyl Radical-Based High-Efficiency OLED

Perchlorotrityl radical (PTM), tris (2,4,6-trichlorophenyl) methyl radical (TTM), (3,5-dichloro-4-pyridyl) bis (2,4,6 trichlorophenyl) methyl radical (PyBTM), (N-carbazolyl) bis (2,4,6-trichlorophenyl) methyl radical (CzBTM), and their derivatives are stable organic radicals that exhibit light emissions at room temperature. Since these triarylmethyl radicals have an unpaired electron, their electron spins at the lowest excited state and ground state are both doublets, and the transition from the lowest excited state to the ground state does not pose the problem of a spin-forbidden reaction. When used as OLED layers, these triarylmethyl radicals exhibit unique light-emitting properties, which can increase the theoretical upper limit of the OLED’s internal quantum efficiency (IQE) to 100%. In recent years, research on the luminescent properties of triarylmethyl radicals has attracted increasing attention. In this review, recent developments in these triarylmethyl radicals and their derivatives in OLED devices are introduced.

Green-/NIR-Light-Controlled Rapid Photochromism Featuring Reversible Thermally Activated Delayed Fluorescence and Photoelectronic Switching

Fluorescent dithienylethene based photochromic materials have been attracting considerable attention owing to their wide applications in biological and material sciences. However, limitations of detrimental UV irradiation for photocyclization, short emission...

Red-to-NIR emissive radical cations derived from simple pyrroles

Red-to-near-infrared (NIR) fluorophores are highly desirable in bio-imaging studies with advantages of high tissue penetration ability and less interference from auto-fluorescence. However, their preparation usually requires tedious synthetic procedures, which seriously restrict their applications. Thus, the direct preparation of red-to-NIR fluorophores from easily available substrates is highly desirable. Compared with the conventional closed-shell fluorophores, radical cations feature a large red-shift absorption, but only very few of them are fluorescent and they suffer from high instability. Herein, we proposed a convenient strategy for the preparation of red-to-NIR fluorophores through air oxidation of electron-rich 2,5-dimethylpyrroles to in situ generate red-to-NIR emissive radical cations, which can be stabilized by adsorption on silica gel-coated thin layer chromatography (TLC) plates or encapsulated in cucurbit[7]uril (CB[7]). The radical cations derived from pyrroles were verified using electron paramagnetic resonance (EPR) spectroscopy, theoretical calculations and one-electron oxidation experiments. Moreover, the pyrrole-derived radical cations encapsulated in CB[7] can be used for mitochondrial imaging in living cells with high specificity and in vivo imaging with long-term stability. The easily available pyrrole-derived radical cations with red-to-NIR emission are thus promising for biomedical applications.

Assembled triphenylamine bis-urea macrocycles: exploring photodriven electron transfer from host to guests

Absorption of electronic acceptors in the accessible channels of an assembled triphenylamine (TPA) bis-urea macrocycle 1 enabled the study of electron transfer from the walls of the TPA framework to the encapsulated guests. The TPA host is isoskeletal in all host-guest structures analyzed with guests 2,1,3-benzothiadiazole, 2,5-dichlorobenzoquinone and I₂ loading in single-crystal-to-single-crystal transformations. Analysis of the crystal structures highlights how the spatial proximity and orientation of the TPA host and the entrapped guests influence their resulting photophysical properties and allow direct comparison of the different donor-acceptor complexes. Diffuse reflectance spectroscopy shows that upon complex formation 1·2,5-dichlorobenzoquinone exhibits a charge transfer (CT) transition. Whereas, the 1·2,1,3-benzothiadiazole complex undergoes a photoinduced electron transfer (PET) upon irradiation with 365 nm LEDs. The CT absorptions were also identified with the aid of time dependent density functional theory (TD-DFT) calculations. Cyclic voltammetry experiments show that 2,1,3-benzothiadiazole undergoes reversible reduction within the host-guest complex. Moreover, the optical band gaps of the host 1·2,5-dichlorobenzoquinone (1.66 eV), and host 1·2,1,3-benzothiadiazole (2.15 eV) complexes are significantly smaller as compared to the free host 1 material (3.19 eV). Overall, understanding this supramolecular electron transfer strategy should pave the way towards designing lower band gap inclusion complexes.

Tunable Photoresponsive Behaviors Based on Triphenylamine Derivatives: The Pivotal Role of π-Conjugated Structure and Corresponding Application

Photoresponsive materials have drawn much attention and are widely applied in daily life for their reversible changes in luminous color or appearance color under light irradiation. In this work, a new photoresponsive system based on triarylamine derivatives is developed. With the changed aryl substituents, adjustable photoresponsive properties, including photoactivated phosphorescence and photochromism after being dispersed into the poly(methyl methacrylate) (PMMA) matrix, are demonstrated. According to the theoretical calculations and experimental data, the competition between the formations of triplet excitons and cationic radicals under photoirradiation should be the main reason for their different photoresponsive properties. Excitingly, the applications of rewritable photopatterning, anticounterfeiting, information encryption, and decryption are realized conveniently, in addition to the successful model of sunglasses to protect eyes away from ultraviolet radiation and strong light in the sunlight. These studies present a simple and efficient design strategy for the development of photoresponsive materials on modulating the phosphorescence and photochromic property.

Enhancing the Operability of Photoexcitation-Controlled Aggregation-Induced Emissive Molecules in the Organic Phase

Controllable aggregation-induced emission luminogens (AIEgens) by photoexcitation can be conducted within a single solvent, thus opening new opportunities for preparing and processing smart materials. However, undesired side-reactions like photooxidation that can easily occur in the organic phase remain, limiting their applications. To enhance the operability of photoexcitation-controlled AIEgens (to specifically produce a phosphorescence characteristic) in the organic phase, in this work, we employ a typical prototype, hexathiobenzene, usually as the specific phosphorescent group, and investigate a series of physical and chemical factors, such as light intensity, dissolved oxygen content, and solvent polarity, to explore ways to control the photoexcitation-controllable AIEgens against the impurities from side-reactions. An organogel strategy was also developed to minimize interference factors and improve the practical application ability. We believe that the presented results provide new insights into the further development of the photoexcitation-based functional materials and the promotion of their practical usage.

How to Manipulate Through-Space Conjugation and Clusteroluminescence of Simple AIEgens with Isolated Phenyl Rings

Apart from the traditional through-bond conjugation (TBC), through-space conjugation (TSC) is gradually proved as another important interaction in photophysical processes, especially for the recent observation of clusteroluminescence from nonconjugated molecules. However, unlike TBC in conjugated chromophores, it is still challenging to manipulate TSC and clusteroluminescence. Herein, simple and nonconjugated triphenylmethane (TPM) and its derivatives with electron-donating and electron-withdrawing groups were synthesized, and their photophysical properties were systematically studied. TPM was characterized with visible clusteroluminescence due to the intramolecular TSC. Experimental and theoretical results showed that the introduction of electron-donating groups into TPM could red-shift the wavelength and increase the efficiency of clusteroluminescence simultaneously, due to the increased electronic density and stabilization of TSC. However, TPM derivatives with electron-withdrawing groups showed inefficient or even quenched clusteroluminescence caused by the vigorous excited-state intramolecular motion and intermolecular photoinduced electron transfer process. This work provides a reliable strategy to manipulate TSC and clusteroluminescence.