Iron‐Catalyzed Radical Asymmetric Aminoazidation and Diazidation of Styrenes

Photocatalyzed Azidofunctionalization of Alkenes via Radical-Polar Crossover

The azidofunctionalization of alkenes under mild conditions using commercially available starting materials and easily accessible reagents is reported based on a radical-polar crossover strategy. A broad range of alkenes, including vinyl arenes, enamides, enol ethers, vinyl sulfides, and dehydroamino esters, were regioselectively functionalized with an azide and nucleophiles such as azoles, carboxylic acids, alcohols, phosphoric acids, oximes, and phenols. The method led to a more efficient synthesis of 1,2-azidofunctionalized pharmaceutical intermediates when compared to previous approaches, resulting in both reduction of step count and increase in overall yield. The scope and limitations of these transformations were further investigated through a standard unbiased selection of 15 substrate combinations out of 1,175,658 possible using a clustering technique.

Iron-catalyzed ligand-free diazidation of alkenes controlled by the ratio of TBHP to TMSN3

The diazidation of alkenes through an iron-catalyzed, ligand-free system has been established, providing straightforward access to structurally vicinal diazides in good yields at room temperature with TMSN3 as the azido source. The ratio of tBuOOH to TMSN3 was essential for the reaction: one equivalent TMSN3 was needed to react with tBuOOH to form HN3 as a nucleophile in the reaction ultimately achieving the diazidation of alkenes.

Azocarboxamide-enabled enantioselective regiodivergent unsymmetrical 1,2-diaminations

Enantioenriched unsymmetrical vicinal diamines are important basic structural motifs. While catalytic asymmetric intermolecular 1,2-diamination of carbon-carbon double bonds represents the most straightforward approach for preparing enantioenriched vicinal-diamine-containing heterocycles, these reactions are often limited to the installation of undifferentiated amino functionalities through metal catalysis and/or the use of stoichiometric amounts of oxidants. Here, we report organocatalytic enantioselective unsymmetrical 1,2-diaminations based on the rational design of a bifunctional 1,2-diamination reagent, namely, azocarboxamides (ACAs). Under the catalysis of chiral phosphoric acid, unsymmetrical 1,2-diaminations of ACAs with various electron-rich double bonds readily occur in a regiodivergent manner. Indoles prefer dual hydrogen-bonding mode to give dearomative (4 + 2) products, and 3-vinylindoles and azlactones are inclined to undergo unsymmetrical 1,2-diamination via the (3 + 2) process. DFT calculations are performed to reveal the reaction mechanism and the origin of the regio- and enantioselectivity. Guided by computational design, we are able to reverse the regioselectivity of the dearomative unsymmetrical 1,2-diamination of indoles using Lewis acid catalysis.

Iron(II)-Catalyzed 1,2-Diamination of Styrenes Installing a Terminal NH2 Group Alongside Unprotected Amines

1,2-Diamination of alkenes represents an attractive way to generate differentiated vicinal diamines, which are prevalent motifs in biologically active compounds and catalysts. However, existing methods are usually limited in scope and produce diamines where one or both nitrogens are protected, adding synthetic steps for deprotection and further N-functionalization to reach a desired target. Furthermore, the range of amino groups that can be introduced at the internal position is fairly limited. Here we describe a 1,2-diamination of styrenes that directly installs a free amino group at the terminal position and a wide variety of unprotected nitrogen nucleophiles (primary or secondary alkyl or aromatic amines, sulfoximines, N-heterocycles, and ammonia surrogate) at the internal position. Two complementary sets of conditions encompass electronically activated and deactivated styrenes with diverse substitution patterns and functional groups. Moreover, this strategy can be extended to the 1,2-aminothiolation of styrenes.

Recent progress in asymmetric radical reactions enabled by chiral iron catalysts

Transition-metal-catalyzed radical asymmetric reactions offer a versatile and effective platform for accessing chiral organic molecules with high enantiopurity. Given that iron is the most abundant and less toxic transition metalic element available, the application of iron catalysts is considered to be a more sustainable and attractive approach. Over the last decade, several exciting and notable achievements have been witnessed. In this highlight, we aim to provide an overview of the progress in ligand-enabled iron-catalyzed asymmetric radical reactions, with an emphasis on the reaction mechanisms.

Practical and regioselective halonitrooxylation of olefins to access β-halonitrates

Organic nitrates, as effective donors of the signaling molecule nitric oxide, are widely applied in the pharmaceutical industry. However, practical and efficient methods for accessing organic nitrates are still scarce, and achieving high regiocontrol in unactivated alkene difunctionalization remains challenging. Here we present a simple and practical method for highly regioselective halonitrooxylation of unactivated alkenes. The approach utilizes TMSX (X: Cl, Br, or I) and oxybis(aryl-λ3-iodanediyl) dinitrates (OAIDN) as sources of halogen and nitrooxy groups, with 0.5 mol % FeCl3 as the catalyst. Remarkably, high regioselectivity in the halonitrooxylation of aromatic alkenes can be achieved even without any catalyst. This protocol features easy scalability and excellent functional group compatibility, providing a range of β-halonitrates (127 examples, up to 99% yield, up to >20:1 rr). Notably, 2-iodoethyl nitrate, a potent synthon derived from ethylene, reacts smoothly with a variety of functional units to incorporate the nitrooxy group into the desired molecules.

Photoinduced Copper-Catalyzed Asymmetric Three-Component Radical 1,2-Azidooxygenation of 1,3-Dienes

Radical-involved multicomponent difunctionalization of 1,3-dienes has recently emerged as a promising strategy for rapid synthesis of valuable allylic compounds in one-pot operation. However, the expansion of radical scope and enantiocontrol remain two major challenges. Herein, we describe an unprecedented photoinduced copper-catalyzed highly enantioselective three-component radical 1,2-azidooxygenation of 1,3-dienes with readily available azidobenziodazolone reagent and carboxylic acids. This mild protocol exhibits a broad substrate scope, high functional group tolerance, and exceptional control over chemo-, regio- and enantioselectivity, providing practical access to diverse valuable azidated chiral allylic esters. Mechanistic studies imply that the chiral copper complex is implicated as a bifunctional catalyst in both the photoredox catalyzed azidyl radical generation and enantioselective radical C-O cross-coupling.

Catalytic asymmetric synthesis of 1,2-diamines

The asymmetric catalytic synthesis of 1,2-diamines has received considerable interest, especially in the last ten years, due to their presence in biologically active compounds and their applications for the development of synthetic building blocks, chiral ligands and organocatalysts. Synthetic strategies based on C-N bond-forming reactions involve mainly (a) ring opening of aziridines and azabenzonorbornadienes, (b) hydroamination of allylic amines, (c) hydroamination of enamines and (d) diamination of olefins. In the case of C-C bond-forming reactions are included (a) the aza-Mannich reaction of imino esters, imino nitriles, azlactones, isocyano acetates, and isothiocyanates with imines, (b) the aza-Henry reaction of nitroalkanes with imines, (c) imine-imine coupling reactions, and (d) reductive coupling of enamines with imines, and (e) [3+2] cycloaddition with imines. C-H bond forming reactions include hydrogenation of CN bonds and C-H amination reactions. Other catalytic methods include desymmetrization reactions of meso-diamines.

Iron photocatalysis via Brønsted acid-unlocked ligand-to-metal charge transfer

Reforming sustainable 3d-metal-based visible light catalytic platforms for inert bulk chemical activation is highly desirable. Herein, we demonstrate the use of a Brønsted acid to unlock robust and practical iron ligand-to-metal charge transfer (LMCT) photocatalysis for the activation of multifarious inert haloalkylcarboxylates (CnXmCOO-, X = F or Cl) to produce CnXm radicals. This process enables the fluoro-polyhaloalkylation of non-activated alkenes by combining easily available Selectfluor as a fluorine source. Valuable alkyl fluorides including potential drug molecules can be easily obtained through this protocol. Mechanistic studies indicate that the real light-harvesting species may derive from the in situ-assembly of Fe3+, CnXmCOO-, H+, and acetonitrile solvent, in which the Brønsted acid indeed increases the efficiency of LMCT between the iron center and CnXmCOO- via hydrogen-bond interactions. We anticipate that this Brønsted acid-unlocked iron LMCT platform would be an intriguing sustainable option to execute the activation of inert compounds.

Enantioselective copper-catalyzed azidation/click cascade reaction for access to chiral 1,2,3-triazoles

Chiral 1,2,3-triazoles are highly attractive motifs in various fields. However, achieving catalytic asymmetric click reactions of azides and alkynes for chiral triazole synthesis remains a significant challenge, mainly due to the limited catalytic systems and substrate scope. Herein, we report an enantioselective azidation/click cascade reaction of N-propargyl-β-ketoamides with a readily available and potent azido transfer reagent via copper catalysis, which affords a variety of chiral 1,2,3-triazoles with up to 99% yield and 95% ee under mild conditions. Notably, chiral 1,5-disubstituted triazoles that have not been accessed by previous asymmetric click reactions are also prepared with good functional group tolerance.

Three-Component Radical Cross-Coupling: Asymmetric Vicinal Sulfonyl-Esterification of Alkenes Involving Sulfur Dioxide

A novel catalytic system for radical cross-coupling reactions based on copper and chiral Pyridyl-bis(imidazole) (PyBim) ligands is described. It overcomes the challenges of chemoselectivity and enantioselectivity, achieving a highly enantioselective vicinal sulfonyl-esterification reaction of alkenes involving sulfur dioxide. This strategy involves the use of earth-abundant metal catalyst, mild reaction conditions, a broad range of substrates (84 examples), high yields (up to 97% yield), and exceptional control over enantioselectivity. The reaction system is compatible with different types of radical precursors, including O-acylhydroxylamines, cycloketone oxime esters, aryldiazonium salts, and drug molecules. Chiral ligand PyBim is identified as particularly effective in achieving the desired high enantioselectivity. Mechanistic studies reveal that copper/PyBim system plays a vital role in C─O coupling, employing an outer-sphere model. In addition, the side arm effect of ligand is observed.

Asymmetric Three-Component Radical Alkene Carboazidation by Direct Activation of Aliphatic C-H Bonds

Azide compounds are widely present in natural products and drug molecules, and their easy-to-transform characteristics make them widely used in the field of organic synthesis. The merging of transition-metal catalysis with radical chemistry offers a versatile platform for radical carboazidation of alkenes, allowing the rapid assembly of highly functionalized organic azides. However, the direct use of readily available hydrocarbon feedstocks as sp3-hybridized carbon radical precursors to participate in catalytic enantioselective carboazidation of alkenes remains a significant challenge that has yet to be addressed. Herein, we describe an iron-catalyzed asymmetric three-component radical carboazidation of electron-deficient alkenes by direct activation of aliphatic C-H bonds. This approach involves intermolecular hydrogen atom transfer between a hydrocarbon and an alkoxy/aryl carboxyl radical, leading to the formation of a carbon-centered radical. The resulting radical then reacts with electron-deficient alkenes to generate a new radical species that undergoes chiral iron-complex-mediated C-N3 bond coupling. An array of valuable chiral azides bearing a quaternary stereocenter were directly accessed from widely available chemical feedstocks, and their synthetic potential is further demonstrated through more facile transformations to give other valuable enantioenriched building blocks.

Acid Promoted Tetrafunctionalization of Terminal Alkynes: Geminal Diazidation and Dibromination

The synthesis of complex alkanes by the tetrafunctionalization of alkynes is limited and challenging. Herein, an unprecedented efficient geminal diazidation and dibromination of terminal alkynes is developed, which provides novel access to structurally diverse organic azides. The approach has exclusive chemo- and regioselectivity and features mild reaction conditions, good tolerance of various functional groups, and more crucially, no metal involved in the reaction, thereby benefiting the late-stage decoration of medicinal molecules. A mechanistic study showed that the current geminal diazidation and dibromination proceeds via a radical pathway.

Metal-catalyzed asymmetric reactions enabled by organic peroxides

As a class of multifunctional reagents, organic peroxides play vital roles in the chemical industry, pharmaceutical synthesis and polymerization reactions. Metal-catalyzed asymmetric catalysis has emerged as one of the most straightforward and efficient strategies to construct enantioenriched molecules, and an increasing number of metal-catalyzed asymmetric reactions enabled by organic peroxides have been disclosed by researchers in recent years. Despite remarkable progress, the types of asymmetric reactions facilitated by organic peroxides remain limited and the catalysis systems need to be further broadened. To the best of our knowledge, there is still no review devoted to summarizing the reactions from this perspective. In this review, we will endeavor to highlight the advances in metal-catalyzed asymmetric reactions enabled by organic peroxides. We hope that this survey will summarize the functions of organic peroxides in catalytic reactions, improve the understanding of these compounds and inspire future developments in this area.

Cobalt-Promoted Photoredox 1,2-Amidoamination of Alkenes with N-Sulfonamidopyridin-1-ium Salts and Free Amines

A cobalt-promoted photoredox 1,2-amidoamination of alkenes with N-sulfonamidopyridin-1-ium salts and free amines for the synthesis of unsymmetrical vicinal diamines has been developed. The reaction handles N-(sulfonamido)pyridin-1-ium salts as the sulfonamidyl radical precursors and free amines as the nucleophilic terminating reagents to enable the formation of two new C(sp3)-N bonds in a single reaction step and offers a route to selectively producing unsymmetrical vicinal diamines with an exquisite selectivity and a good compatibility of functional groups.

Copper-Catalyzed Selective Three-Component 1,2-Phosphonoazidation of 1,3-Dienes

We report a copper-catalyzed selective 1,2-phosphonoazidation of conjugated dienes. This three-component reaction is achieved by using readily available P(O)-H compounds and bench-stable NaN3. Salient features of this strategy include its mild reaction conditions, broad functional group tolerance, and high chemoselectivity and regioselectivity. Moreover, the compatibility with the late-stage functionalization of drug molecules, the potential for scalable production, and the feasibility of further modifications of the products underscore the practical utility of this protocol in synthetic applications.

Iron-Catalyzed Site- and Regioselective 1,2-Azidoamidations of 1,3-Dienes

The direct 1,2-azidoamidation of unsaturated precursors represents an advantageous approach for the facile synthesis of β-functionalized azides from readily available starting materials. In this paper, we describe a convenient and mild iron-catalyzed 1,2-azidoamidation of 1,3-dienes that shows excellent functional group compatibility to furnish versatile precursors to 1,2-diamine products with high levels of site, regio-, and stereoselectivity. The reaction is proposed to proceed via a single electron transfer/radical addition/C-N bond formation relay process.

Transition-Metal-Catalyzed 1,2-Diaminations of Olefins: Synthetic Methodologies and Mechanistic Studies

1,2-Diamines are synthetically important motifs in organo-catalysis, natural products, and drug research. Continuous utilization of transition-metal based catalyst in direct 1,2-diamination of olefines, in contrast to metal-free transformations, with numerous impressive advances made in recent years (2015-2023). This review summarized contemporary research on the transition-metal catalyzed/mediated [e. g., Cu(II), Pd(II), Fe(II), Rh(III), Ir(III), and Co(II)] 1,2-diamination (asymmetric and non-asymmetric) especially emphasizing the recent synthetic methodologies and mechanistic understandings. Moreover, up-to-date discussion on (i) paramount role of oxidant and catalyst (ii) key achievements (iii) generality and uniqueness, (iv) synthetic limitations or future challenges, and (v) future opportunities are summarized related to this potential area.

Regioselective Synthesis of Unsymmetrical Vicinal Diamines via Azidoimination of Alkenes with TMSN3 and Ketimines

2-Azidoimines are versatile precursors to value-added vicinal unsymmetrical diamines, which are among the most common motifs in biologically active compounds. Herein, we report their operationally simple synthesis through a highly regioselective intermolecular azidoamination of olefins under metal-free conditions. The approach proceeded through azide and iminyl, two differentiated N-centered radicals. The synthetic potential of the protocols was further established via the condensation/amination sequential cascade and chemoselective, orthogonal transformations to access vicinal primary diamines.

Modular and Practical 1,2-Aryl(Alkenyl) Heteroatom Functionalization of Alkenes through Iron/Photoredox Dual Catalysis

Efficient methods for synthesizing 1,2-aryl(alkenyl) heteroatomic cores, encompassing heteroatoms such as nitrogen, oxygen, sulfur, and halogens, are of significant importance in medicinal chemistry and pharmaceutical research. In this study, we present a mild, versatile and practical photoredox/iron dual catalytic system that enables access to highly privileged 1,2-aryl(alkenyl) heteroatomic pharmacophores with exceptional efficiency and site selectivity. Our approach exhibits an extensive scope, allowing for the direct utilization of a wide range of commodity or commercially available (hetero)arenes as well as activated and unactivated alkenes with diverse functional groups, drug scaffolds, and natural product motifs as substrates. By merging iron catalysis with the photoredox cycle, a vast array of alkene 1,2-aryl(alkenyl) functionalization products that incorporate a neighboring azido, amino, halo, thiocyano and nitrooxy group were secured. The scalability and ability to rapid synthesize numerous bioactive small molecules from readily available starting materials highlight the utility of this protocol.

Catalytic Enantioselective Construction of Chiral γ-Azido Nitriles through Nitrile Group-Promoted Electrophilic Reaction of Alkenes

An efficient approach for the construction of enantioenriched γ-azido nitriles through the chiral sulfide-catalyzed asymmetric electrophilic thioazidation of allylic nitriles is disclosed. A wide range of electron-deficient and -rich aryl, heterocyclic aryl, and alkyl substituents are suitable on the substrates of allylic nitriles. The regio-, enantio-, and diastereoselectivities of the reactions are excellent. As versatile platform molecules, the obtained chiral γ-azido nitriles can be easily converted into high-value-added chiral molecules that are not easily accessed by other methods. Control experiments revealed that the allylic nitrile group is important for control of the reactivity and enantioselectivity of the reaction leading to a broad substrate scope.

Enantioselective catalytic radical decarbonylative azidation and cyanation of aldehydes

Empowered by the ubiquity of carbonyl functional groups in organic compounds, decarbonylative functionalization was prevalent in the construction of complex molecules. Under this context, asymmetric decarbonylative functionalization has emerged as an efficient pathway to accessing chiral motifs. However, ablation of enantiomeric control in a conventional 2e transition metal-catalyzed process was notable because of harsh conditions (high temperatures, etc.) that are usually required. To address this challenge and use readily accessible aldehyde directly, we report the asymmetric radical decarbonylative azidation and cyanation. Diverse aldehydes were directly used as alkyl radical precursor, engaging in the subsequent inner-sphere or outer-sphere ligand transfer where functional motifs (CN and N3) could be incorporated in excellent site- and enantioselectivity. Mild conditions, broad scope, excellent regioselectivity (driven by polarity-matching strategy), and enantioselectivity were shown for both transformations. This radical decarbonylative strategy using aldehydes as alkyl radical precursor has offered a powerful reaction manifold in asymmetric radical transformations to construct functional motifs regio- and stereoselectively.

Recent Advances in the Enantioselective Radical Reactions

The review covers research published since 2017 and is focused on enantioselective synthesis using radical reactions. It describes recent approaches to the asymmetric synthesis of chiral molecules based on the application of the metal catalysis, dual metal and organocatalysis and finally, pure organocatalysis including enzyme catalysis. This review focuses on the synthetic aspects of the methodology and tries to show which compounds can be obtained in enantiomerically enriched forms.

Photochemical iron-catalyzed decarboxylative azidation via the merger of ligand-to-metal charge transfer and radical ligand transfer catalysis

Ligand-to-metal charge transfer (LMCT) using stoichiometric copper salts has recently been shown to permit decarboxylative C-N bond formation via an LMCT/radical polar crossover (RPC) mechanism; however, this method is unable to function catalytically and cannot successfully engage unactivated alkyl carboxylic acids, presenting challenges to the general applicability of this approach. Leveraging the concepts of ligand-to-metal charge transfer (LMCT) and radical-ligand-transfer (RLT), we herein report the first photochemical, iron-catalyzed direct decarboxylative azidation. Simply irradiating an inexpensive iron nitrate catalyst in the presence of azidotrimethylsilane allows for a diverse array of carboxylic acids to be converted to corresponding organic azides directly with broad functional group tolerance and mild conditions. Intriguingly, no additional external oxidant is required for this reaction to proceed, simplifying the reaction protocol. Finally, mechanistic studies are consistent with a radical mechanism and suggest that the nitrate counteranion serves as an internal oxidant for turnover of the iron catalyst.

Applications of Vanadium, Niobium, and Tantalum Complexes in Organic and Inorganic Synthesis

Organometallic catalysis is a powerful strategy in chemical synthesis, especially with the cheap and low toxic metals based on green chemistry principle. Thus, the selection of the metal is particularly important to plan relevant and applicable processes. The group VB metals have been the subject of exciting and significant advances in both organic and inorganic synthesis. In this Review, we have summarized some reports from recent decades, which are about the development of group VB metals utilized in various types of reactions, such as oxidation, reduction, alkylation, dealkylation, polymerization, aromatization, protein synthesis, and practical water splitting.

Photochemical diazidation of alkenes enabled by ligand-to-metal charge transfer and radical ligand transfer

Vicinal diamines are privileged synthetic motifs in chemistry due to their prevalence and powerful applications in bioactive molecules, pharmaceuticals, and ligand design for transition metals. With organic diazides being regarded as modular precursors to vicinal diamines, enormous efforts have been devoted to developing efficient strategies to access organic diazide generated from olefins, themselves common feedstock chemicals. However, state-of-the-art methods for alkene diazidation rely on the usage of corrosive and expensive oxidants or complicated electrochemical setups, significantly limiting the substrate tolerance and practicality of these methods on large scale. Toward overcoming these limitations, here we show a photochemical diazidation of alkenes via iron-mediated ligand-to-metal charge transfer (LMCT) and radical ligand transfer (RLT). Leveraging the merger of these two reaction manifolds, we utilize a stable, earth abundant, and inexpensive iron salt to function as both radical initiator and terminator. Mild conditions, broad alkene scope and amenability to continuous-flow chemistry rendering the transformation photocatalytic were demonstrated. Preliminary mechanistic studies support the radical nature of the cooperative process in the photochemical diazidation, revealing this approach to be a powerful means of olefin difunctionalization.

Iron-mediated ligand-to-metal charge transfer enables 1,2-diazidation of alkenes

Given the widespread significance of vicinal diamine units in organic synthesis, pharmaceuticals and functional materials, as well as in privileged molecular catalysts, an efficient and practical strategy that avoids the use of stoichiometric strong oxidants is highly desirable. We herein report the application of ligand-to-metal charge transfer (LMCT) excitation to 1,2-diazidation reactions from alkenes and TMSN3 via a coordination-LMCT-homolysis process with more abundant and greener iron salt as the catalyst. Such a LMCT-homolysis mode allows the generation of electrophilic azidyl radical intermediate from Fe-N3 complexes poised for subsequent radical addition into carbon-carbon double bond. The generated carbon radical intermediate is further captured by iron-mediated azidyl radical transfer, enabling dual carbon-nitrogen bond formation. This protocol provides a versatile platform to access structurally diverse diazides with high functional group compatibility from readily available alkenes without the need of chemical oxidants.

NIS-Promoted Selective Amino-Diazidation and Amino-Iodoazidation of O-Homoallyl Benzimidates: Synthesis of Vicinal Diazido 1,3-Oxazines and Vicinal Iodoazido 1,3-Oxazines

Amines, especially those with multi-nitrogen moieties, are widespread in natural products and biologically active compounds. Thus, the development of direct and efficient methods to introduce multiple nitrogen-containing fragments into compounds in one step is highly desirable yet challenging. Herein, we report an NIS-promoted selective amino-diazidation and amino-iodoazidation of O-homoallyl benzimidates with NaN₃. By using this protocol, a variety of vicinal diazido-substituted 1,3-oxazines and vicinal iodoazido-substituted 1,3-oxazines were directly synthesized in a controllable manner. Preliminary mechanistic investigations revealed that the reaction operates through a NIS-promoted four-step cascade process. The developed method has the merits of metal-free, excellent functional group compatibility, simple operation, and mild conditions.

The advent of electrophilic hydroxylamine-derived reagents for the direct preparation of unprotected amines

Electrophilic aminating reagents have seen a renaissance in recent years as effective nitrogen sources for the synthesis of unprotected amino functionalities. Based on their reactivity, several noble and non-noble transition metal catalysed amination reactions have been developed. These include the aziridination and difunctionalisation of alkenes, the amination of arenes as well as the synthesis of aminated sulfur compounds. In particular, the use of hydroxylamine-derived (N-O) reagents, such as PONT (PivONH3OTf), has enabled the introduction of unprotected amino groups on various different feedstock compounds, such as alkenes, arenes and thiols. This strategy obviates undesired protecting-group manipulations and thus improves step efficiency and atom economy. Overall, this feature article gives a recent update on several reactions that have been unlocked by employing versatile hydroxylamine-derived aminating reagents, which facilitate the generation of unprotected primary, secondary and tertiary amino groups.

Site- and Enantioselective Manganese-Catalyzed Benzylic C-H Azidation of Indolines

A manganese-catalyzed highly site- and enantioselective benzylic C-H azidation of indolines has been described. The practical method is applicable for azidation of a tertiary benzylic C-H bond with good functional group tolerance, allowing facile access to structurally diverse tertiary azide-containing indolines in high efficiency with excellent site-, chemo-, and enantioselectivity. The generality of the method was further demonstrated by site- and enantioselective azidation of the secondary benzylic C-H bond for a range of secondary azide-containing indolines. The benzylic C-H azidation method allows to straightforwardly and enantioselectively install a variety of nitrogen-based functional groups and diverse bioactive molecules at the C³ position of indoline frameworks through post-azidation manipulations. Gram-scale synthesis was also demonstrated, further highlighting the synthetic potential of the method. Mechanistic studies by combined experiments and computations elucidated the reaction mechanism and origins of stereoselectivity.

Radical transformations for allene synthesis

Allenes are valuable organic molecules that feature unique physical and chemical properties. They are not only often found in natural products, but also act as versatile building blocks for the access of complex molecular targets, such as natural products, pharmaceuticals, and functional materials. Therefore, many remarkable and elegant methodologies have been established for the synthesis of allenes. Recently, more and more methods for radical synthesis of allenes have been developed, clearly emphasizing the associated great synthetic values. In this perspective, we will discuss recent important advances in the synthesis of allenes via radical intermediates by categorizing them into different types of substrates as well as distinct catalytic systems. The mechanistic studies and synthetic challenges will be highlighted.

Copper-Catalyzed Three-Component Germyl Peroxidation of Alkenes

The concurrent incorporation of a germyl fragment and another functional group (beyond the hydrogen atom) across the C═C double bond is a highly appealing yet challenging task. Herein we demonstrate the efficient germyl peroxidation of alkenes with germanium hydrides and tert-butyl hydroperoxide via a copper-catalyzed three-component radical relay strategy. This protocol exhibits excellent functional group tolerance and exquisite chemo- and regioselectivity under mild conditions and represents a rare example of constructing synthetically challenging metal-embedded organic peroxides.

An N-Fluorinated Imide for Practical Catalytic Imidations

Catalytic imidation using NFSI as the nitrogen source has become an emerging tool for oxidative carbon-nitrogen bond formation. However, the less than ideal benzenesulfonimide moiety is incorporated into products, severely detracting its synthetic value. As a solution to this challenge, we report herein the development of a novel N-fluorinated imide, N-fluoro-N-(fluorosulfonyl)carbamate (NFC), by which the attached imide moiety acts as a modular synthetic handle for one-step derivatization to amines, sulfonamides, and sulfamides. Furthermore, this study revealed the superior reactivity of NFC as showcased in a copper-catalyzed imidation of benzene derivatives and imidocyanation of aliphatic alkenes, overcoming the limitation of NFSI-mediated reactions.

An iron-catalyzed multicomponent reaction of cycloketone oxime esters, alkenes, DABCO·(SO2)2 and trimethylsilyl azide

The synthesis of β-azidosulfones starting from alkenes, cycloketone oxime esters, trimethylsilyl azide and a sulfur dioxide surrogate of DABCO·(SO2)2 under iron catalysis is developed.

Iron-catalyzed domino coupling reactions of π-systems

The development of environmentally benign, inexpensive, and earth-abundant metal catalysts is desirable from both an ecological and economic standpoint. Certainly, in the past couple decades, iron has become a key player in the development of sustainable coupling chemistry and has become an indispensable tool in organic synthesis. Over the last ten years, organic chemistry has witnessed substantial improvements in efficient synthesis because of domino reactions. These protocols are more atom-economic, produce less waste, and demand less time compared to a classical stepwise reaction. Although iron-catalyzed domino reactions require a mindset that differs from the more routine noble-metal, homogenous iron catalysis they bear the chance to enable coupling reactions that rival that of noble-metal-catalysis. This review provides an overview of iron-catalyzed domino coupling reactions of π-systems. The classifications and reactivity paradigms examined should assist readers and provide guidance for the design of novel domino reactions.

Iron-Catalyzed Asymmetric Decarboxylative Azidation

The first iron-catalyzed asymmetric azidation of benzylic peresters has been reported with trimethylsilyl azide (TMSN₃) as the azido source. Hydrocarbon radicals that lack of strong interactions were capable to be enantioselectively azidated. The reaction features good functional group tolerance, high yields, and mild conditions. The chiral benzylic azides can further be used in click reaction, phosphoramidation, and reductive amination, which demonstrate the synthetic values of this reaction.

Catalytic, Enantioselective Diamination of Alkenes

Enantioselective diamination of alkenes represents one of the most straightforward methods to access enantioenriched, vicinal diamines, which are not only frequently encountered in biologically active compounds, but also have broad applications in asymmetric synthesis. Although the analogous dihydroxylation of olefins is well-established, the development of enantioselective olefin diamination lags far behind. Nevertheless, several successful methods have been developed that operate by different reaction mechanisms, including a cycloaddition pathway, a two-electron redox pathway, and a radical pathway. This short review summarizes recent advances and identifies limitations, with the aim of inspiring further developments in this area.

1 Introduction

2 Cycloaddition Pathway

3 Two-Electron Redox Pathway

3.1 Pd(0)/Pd(II) Diamination

3.2 Pd(II)/Pd(IV) Diamination

3.3 I(I)/I(III) Diamination

3.4 Se(II)/Se(IV) Diamination

4 One-Electron Radical Pathway

4.1 Cu-Catalyzed Diamination

4.2 Fe-Catalyzed Diamination

5 Summary and Outlook

Mechanistic Investigation of the Iron-Catalyzed Azidation of Alkyl C(sp3)-H Bonds with Zhdankin's λ3-Azidoiodane

An in-depth study of the mechanism of the azidation of C(sp³)-H bonds with Zhdankin's λ³-azidoiodane reagent catalyzed by iron(II)(pybox) complexes is reported. Previously, it was shown that tertiary and benzylic C(sp³)-H bonds of a range of complex molecules underwent highly site-selective azidation by reaction with a λ³-azidoiodane reagent and an iron(II)(pybox) catalyst under mild conditions. However, the mechanism of this reaction was unclear. Here, a series of mechanistic experiments are presented that reveal critical features responsible for the high selectivity and broad scope of this reaction. These experiments demonstrate the ability of the λ³-azidoiodane reagent to undergo I-N bond homolysis under mild conditions to form λ²-iodanyl and azidyl radicals that undergo highly site-selective and rate-limiting abstraction of a hydrogen atom from the substrate. The resultant alkyl radical then combines rapidly with a resting state iron(III)-azide complex, which is generated by the reaction of the λ³-azidoiodane with the iron(II)(pybox) complex, to form the C(sp³)-N₃ bond. This mechanism is supported by the independent synthesis of well-defined iron complexes characterized by cyclic voltammetry, X-ray diffraction, and EPR spectroscopy, and by the reaction of the iron complexes with alkanes and the λ³-azidoiodane. Reaction monitoring and kinetic studies further reveal an unusual effect of the catalyst on the rate of formation of product and consumption of reactants and suggest a blueprint for the development of new processes leading to late-stage functionalization of C(sp³)-H bonds.

Iron-Catalyzed Enantioselective Radical Carboazidation and Diazidation of α,β-Unsaturated Carbonyl Compounds

Azidation of alkenes is an efficient protocol to synthesize organic azides which are important structural motifs in organic synthesis. Enantioselective radical azidation, as a useful strategy to install a C-N₃ bond, remains challenging due to the inherently instability and unique structure of radicals. Here, we disclose an efficient enantioselective radical carboazidation and diazidation of α,β-unsaturated ketones and amides catalyzed by chiral N,N'-dioxide/Fe(OTf)₂ complexes. An array of substituted alkenes was transformed to the corresponding α-azido carbonyl derivatives in good to excellent enantioselectivities, benefiting the preparation of chiral α-amino ketones, vicinal amino alcohols, and vicinal diamines. Control experiments and mechanistic studies proved the radical pathway in the reaction process. The DFT calculations showed that the azido transferred to the radical intermediate via an intramolecular five-membered transition state with the internal nitrogen of the Fe-N₃ species.

Diamine Synthesis via the Nitrogen-Directed Azidation of σ- and π-C-C Bonds

Diamines are essential building blocks for the synthesis of agrochemicals, drugs, and organic materials, yet their synthesis remains challenging, as both nitrogens need to be differentiated and diverse substitution patterns (1,2, 1,3, or 1,4) are required. We report herein a new strategy giving access to 1,2, 1,3, and 1,4 amido azides as orthogonally protected diamines based on the nitrogen-directed diazidation of alkenes, cyclopropanes, and cyclobutanes. Commercially available copper thiophene-2-carboxylate (CuTc, 2 mol %) as catalyst promoted the diazidation of both π and σ C-C bonds within 10 min in the presence of readily available oxidants and trimethylsilyl azide. Selective substitution of the formed α-amino azide by carbon nucleophiles (electron-rich aromatic, malonate, organosilicon, organoboron, organozinc, and organomagnesium compounds) was then achieved in a one-pot fashion, leading to the formation of 1,2-, 1,3-, and 1,4-diamines with the amino groups protected orthogonally as an amide/carbamate and an azide.

FeCl2-Mediated Regioselective Aminochlorination and Aminoazidation of Styrenes with Trifluoromethanesulfonyl Azide

An efficient aminochlorination reaction of stryenes is described using N₃SO₂CF₃ as an amination reagent and FeCl₂ as a chloride source. The operationally simple procedure features mild reaction conditions, good functional group compatibility, and high regioselectivity. An example of aminobromination using FeBr₂ is also realized. Additionally, a one-pot aminoazidation of styrenes is achieved by adding sodium azide to the reaction. The gram-scale synthesis and downstream derivatization of the products are showcased as well.