Sustainable Lithium-Metal Battery Achieved by a Safe Electrolyte Based on Recyclable and Low-Cost Molecular Sieve

Ultralong Cycling and Interfacial Regulation of Bilayer Heterogeneous Composite Solid-State Electrolytes in Lithium Metal Batteries

Under the background of "carbon neutral", lithium-ion batteries (LIB) have been widely used in portable electronic devices and large-scale energy storage systems, but the current commercial electrolyte is mainly liquid organic compounds, which have serious safety risks. In this paper, a bilayer heterogeneous composite solid-state electrolyte (PLPE) was constructed with the 3D LiX zeolite nanofiber (LiX-NF) layer and in-situ interfacial layer, which greatly extends the life span of lithium metal batteries (LMB). LiX-NF not only offers a continuous fast path for Li+, but also zeolite's Lewis acid-base interaction can immobilize large anions, which significantly improves the electrochemical performance of the electrolyte. In addition, the in-situ interfacial layer at the electrode-electrolyte interface can effectively facilitate the uniform deposition of Li+ and inhibit the growth of lithium dendrites. As a result, the Li/Li battery assembled with PLPE can be stably cycled for more than 2500 h at 0.1 mA cm-2. Meanwhile, the initial discharge capacity of the LiFePO4/PLPE/Li battery can be 162.43 mAh g-1 at 0.5 C, and the capacity retention rate is 82.74% after 500 cycles. These results emphasize that this bilayer heterogeneous composite solid-state electrolyte has distinct properties and shows excellent potential for application in LMB.

Unveiling Confinement Engineering for Achieving High-Performance Rechargeable Batteries

The confinement effect, restricting materials within nano/sub-nano spaces, has emerged as an innovative approach for fundamental research in diverse application fields, including chemical engineering, membrane separation, and catalysis. This confinement principle recently presents fresh perspectives on addressing critical challenges in rechargeable batteries. Within spatial confinement, novel microstructures and physiochemical properties have been raised to promote the battery performance. Nevertheless, few clear definitions and specific reviews are available to offer a comprehensive understanding and guide for utilizing the confinement effect in batteries. This review aims to fill this gap by primarily summarizing the categorization of confinement effects across various scales and dimensions within battery systems. Subsequently, the strategic design of confinement environments is proposed to address existing challenges in rechargeable batteries. These solutions involve the manipulation of the physicochemical properties of electrolytes, the regulation of electrochemical activity, and stability of electrodes, and insights into ion transfer mechanisms. Furthermore, specific perspectives are provided to deepen the foundational understanding of the confinement effect for achieving high-performance rechargeable batteries. Overall, this review emphasizes the transformative potential of confinement effects in tailoring the microstructure and physiochemical properties of electrode materials, highlighting their crucial role in designing novel energy storage devices.

Solvation-Tailored PVDF-Based Solid-State Electrolyte for High-Voltage Lithium Metal Batteries

Poly(vinylidene fluoride) (PVDF)-based polymer electro-lytes are attracting increasing attention for high-voltage solid-state lithium metal batteries because of their high room temperature ionic conductivity, adequate mechanical strength and good thermal stability. However, the presence of highly reactive residual solvents, such as N, N-dimethylformamide (DMF), severely jeopardizes the long-term cycling stability. Herein, we propose a solvation-tailoring strategy to confine residual solvent molecules by introducing low-cost 3 Å zeolite molecular sieves as fillers. The strong interaction between DMF and the molecular sieve weakens the ability of DMF to participate in the solvation of Li+, leading to more anions being involved in solvation. Benefiting from the tailored anion-rich coordination environment, the interfacial side reactions with the lithium anode and high-voltage NCM811 cathode are effectively suppressed. As a result, the solid-state Li||Li symmetrical cells demonstrates ultra-stable cycling over 5100 h at 0.1 mA cm-2, and the Li||NCM811 full cells achieve excellent cycling stability for more than 1130 and 250 cycles under the charging cut-off voltages of 4.3 V and 4.5 V, respectively. Our work is an innovative exploration to address the negative effects of residual DMF in PVDF-based solid-state electrolytes and highlights the importance of modulating the solvation structures in solid-state polymer electrolytes.

A Molecular-Sieving Interphase Towards Low-Concentrated Aqueous Sodium-Ion Batteries

Aqueous sodium-ion batteries are known for poor rechargeability because of the competitive water decomposition reactions and the high electrode solubility. Improvements have been reported by salt-concentrated and organic-hybridized electrolyte designs, however, at the expense of cost and safety. Here, we report the prolonged cycling of ASIBs in routine dilute electrolytes by employing artificial electrode coatings consisting of NaX zeolite and NaOH-neutralized perfluorinated sulfonic polymer. The as-formed composite interphase exhibits a molecular-sieving effect jointly played by zeolite channels and size-shrunken ionic domains in the polymer matrix, which enables high rejection of hydrated Na+ ions while allowing fast dehydrated Na+ permeance. Applying this coating to electrode surfaces expands the electrochemical window of a practically feasible 2 mol kg-1 sodium trifluoromethanesulfonate aqueous electrolyte to 2.70 V and affords Na2MnFe(CN)6//NaTi2(PO4)3 full cells with an unprecedented cycling stability of 94.9% capacity retention after 200 cycles at 1 C. Combined with emerging electrolyte modifications, this molecular-sieving interphase brings amplified benefits in long-term operation of ASIBs.

Janus Quasi-Solid Electrolyte Membranes with Asymmetric Porous Structure for High-Performance Lithium-Metal Batteries

Quasi-solid electrolytes (QSEs) based on nanoporous materials are promising candidates to construct high-performance Li-metal batteries (LMBs). However, simultaneously boosting the ionic conductivity (σ) and lithium-ion transference number (t+) of liquid electrolyte confined in porous matrix remains challenging. Herein, we report a novel Janus MOFLi/MSLi QSEs with asymmetric porous structure to inherit the benefits of both mesoporous and microporous hosts. This Janus QSE composed of mesoporous silica and microporous MOF exhibits a neat Li+ conductivity of 1.5 × 10-4 S cm-1 with t+ of 0.71. A partially de-solvated structure and preference distribution of Li+ near the Lewis base O atoms were depicted by MD simulations. Meanwhile, the nanoporous structure enabled efficient ion flux regulation, promoting the homogenous deposition of Li+. When incorporated in Li||Cu cells, the MOFLi/MSLi QSEs demonstrated a high Coulombic efficiency of 98.1%, surpassing that of liquid electrolytes (96.3%). Additionally, NCM 622||Li batteries equipped with MOFLi/MSLi QSEs exhibited promising rate performance and could operate stably for over 200 cycles at 1 C. These results highlight the potential of Janus MOFLi/MSLi QSEs as promising candidates for next-generation LMBs.

Upgrading the Separators Integrated with Desolvation and Selective Deposition toward the Stable Lithium Metal Batteries

A practical and effective approach to improve the cycle stability of high-energy density lithium metal batteries (LMBs) is to selectively regulate the growth of the lithium anode. The design of desolvation and lithiophilic structure have proved to be significant means to regulate the lithium deposition process. Here, a fluorinated polymer lithiophilic separator (LS) loaded with a metal-organic framework (MOF801) is designed, which facilitates the rapid transfer of Li+ within the separator owing to the MOF801-anchored PF6 - from the electrolyte, Li deposition is confined in the plane resulting from the polymer fiber layer rich in lithiophilic groups (C─F). The numerical simulation results confirm that LS induces a uniform electric field and Li+ concentration distribution. Visualization technology records the behavior of regular Li deposition in Li||Li and Li||Cu cells equipping LS. Therefore, LS exhibits an ultrahigh Li+ transference number (tLi + = 0.80) and a large exchange current density (j0 = 1.963 mA cm-2 ). LS guarantees the stable operation of Li||Li cells for over 1000 h. In addition, the LiNi0.8 Co0.1 Mn0.1 O2 ||Li cell equipped with LS exhibits superior rate and cycle performances owing to the formation of LiF-rich robust SEI layers. This study provides a way forward for dendrite-free Li anodes from the perspective of separator engineering.

Olefin-Linked Covalent Organic Frameworks with Electronegative Channels as Cationic Highways for Sustainable Lithium Metal Battery Anodes

Despite the enormous interest in Li metal as an ideal anode material, the uncontrollable Li dendrite growth and unstable solid electrolyte interphase have plagued its practical application. These limitations can be attributed to the sluggish and uneven Li+ migration towards Li metal surface. Here, we report olefin-linked covalent organic frameworks (COFs) with electronegative channels for facilitating selective Li+ transport. The triazine rings and fluorinated groups of the COFs are introduced as electron-rich sites capable of enhancing salt dissociation and guiding uniform Li+ flux within the channels, resulting in a high Li+ transference number (0.85) and high ionic conductivity (1.78 mS cm-1 ). The COFs are mixed with a polymeric binder to form mixed matrix membranes. These membranes enable reliable Li plating/stripping cyclability over 700 h in Li/Li symmetric cells and stable capacity retention in Li/LiFePO4 cells, demonstrating its potential as a viable cationic highway for accelerating Li+ conduction.

Interfacial "Single-Atom-in-Defects" Catalysts Accelerating Li+ Desolvation Kinetics for Long-Lifespan Lithium-Metal Batteries

The lithium-metal anode is a promising candidate for realizing high-energy-density batteries owing to its high capacity and low potential. However, several rate-limiting kinetic obstacles, such as the desolvation of Li+ solvation structure to liberate Li+ , Li0 nucleation, and atom diffusion, cause heterogeneous spatial Li-ion distribution and fractal plating morphology with dendrite formation, leading to low Coulombic efficiency and depressive electrochemical stability. Herein, differing from pore sieving effect or electrolyte engineering, atomic iron anchors to cation vacancy-rich Co1- x S embedded in 3D porous carbon (SAFe/CVRCS@3DPC) is proposed and demonstrated as catalytic kinetic promoters. Numerous free Li ions are electrocatalytically dissociated from the Li+ solvation complex structure for uniform lateral diffusion by reducing desolvation and diffusion barriers via SAFe/CVRCS@3DPC, realizing smooth dendrite-free Li morphologies, as comprehensively understood by combined in situ/ex situ characterizations. Encouraged by SAFe/CVRCS@3DPC catalytic promotor, the modified Li-metal anodes achieve smooth plating with a long lifespan (1600 h) and high Coulombic efficiency without any dendrite formation. Paired with the LiFePO4 cathode, the full cell (10.7 mg cm-2 ) stabilizes a capacity retention of 90.3% after 300 cycles at 0.5 C, signifying the feasibility of using interfacial catalysts for modulating Li behaviors toward practical applications.

Toward High Performance Anodes for Sodium-Ion Batteries: From Hard Carbons to Anode-Free Systems

Sodium-ion batteries (SIBs) have been deemed to be a promising energy storage technology in terms of cost-effectiveness and sustainability. However, the electrodes often operate at potentials beyond their thermodynamic equilibrium, thus requiring the formation of interphases for kinetic stabilization. The interfaces of the anode such as typical hard carbons and sodium metals are particularly unstable because of its much lower chemical potential than the electrolyte. This creates more severe challenges for both anode and cathode interfaces when building anode-free cells to achieve higher energy densities. Manipulating the desolvation process through the nanoconfining strategy has been emphasized as an effective strategy to stabilize the interface and has attracted widespread attention. This Outlook provides a comprehensive understanding about the nanopore-based solvation structure regulation strategy and its role in building practical SIBs and anode-free batteries. Finally, guidelines for the design of better electrolytes and suggestions for constructing stable interphases are proposed from the perspective of desolvation or predesolvation.

Solution NMR of Battery Electrolytes: Assessing and Mitigating Spectral Broadening Caused by Transition Metal Dissolution

NMR spectroscopy is a powerful tool that is commonly used to assess the degradation of lithium-ion battery electrolyte solutions. However, dissolution of paramagnetic Ni²⁺ and Mn²⁺ ions from cathode materials may affect the NMR spectra of the electrolyte solution, with the unpaired electron spins in these paramagnetic solutes inducing rapid nuclear relaxation and spectral broadening (and often peak shifts). This work establishes how dissolved Ni²⁺ and Mn²⁺ in LiPF₆ electrolyte solutions affect ¹H, ¹⁹F, and ³¹P NMR spectra of pristine and degraded electrolyte solutions, including whether the peaks from degradation species are at risk of being lost and whether the spectral broadening can be mitigated. Mn²⁺ is shown to cause far greater peak broadening than Ni²⁺, with the effect of Mn²⁺ observable at just 10 μM. Generally, ¹⁹F peaks from PF₆ ^- degradation species are most affected by the presence of the paramagnetic metals, followed by ³¹P and ¹H peaks. Surprisingly, when NMR solvents are added to acquire the spectra, the degree of broadening is heavily solvent-dependent, following the trend of solvent donor number (increased broadening with lower solvent donicity). Severe spectral broadening is shown to occur whether Mn is introduced via the salt Mn(TFSI)₂ or is dissolved from LiMn₂O₄. We show that the weak ¹⁹F and ³¹P peaks in spectra of electrolyte samples containing micromolar levels of dissolved Mn²⁺ are broadened to an extent that they are no longer visible, but this broadening can be minimized by diluting electrolyte samples with a suitably coordinating NMR solvent. Li₃PO₄ addition to the sample is also shown to return ¹⁹F and ³¹P spectral resolution by precipitating Mn²⁺ out of electrolyte samples, although this method consumes any HF in the electrolyte solution.

Roles of Trimethyl Borate in Constructing an Interphase on Li Anode: Angel or Demon?

Although coupling a lithium metal anode with a Ni-rich layer cathode is a promising approach for high-energy lithium metal batteries, both electrodes are plagued by their intrinsic unstable interfaces which trigger electrolyte decomposition, lithium dendritic growth, and transition metal dissolution during cycling. Making use of electrolyte additives is one of the most effective solutions to address this issue. In this paper, we explore the roles of trimethyl borate (TMB)─a common film-forming additive to protect high-nickel-ratio ternary cathodes─in suppressing lithium dendrite growth. It is found that, on the one hand, the borate-containing solid electrolyte interphase (SEI) derived from the decomposition of TMB facilitates Li⁺ transport, homogenizing the deposition of Li ions. On the other hand, TMB as an anion receptor provokes LiPF₆ decomposition, prompting the formation of SEI with superfluous LiF. As a result, it is imperative to raise awareness of this double-edge additive when using it to be immune to lithium dendrite and cathodic degradation.

Regulating Solvation Structures Enabled by the Mesoporous Material MCM-41 for Rechargeable Lithium Metal Batteries

For developing the reversible lithium metal anode, constructing an ideal solid electrolyte interphase (SEI) by regulating the Li⁺ solvation structure is a powerful way to overcome the major obstacles of lithium dendrite and limited Coulombic efficiency (CE). Herein, spherical mesoporous molecular sieve MCM-41 nanoparticles are coated on a commercial PP separator and used to regulate the Li⁺ solvation structure for lithium metal batteries (LMBs). The regulated solvation structure exhibits an agminated state with more contact ion pairs (CIPs) and ionic aggregates (AGGs), which successfully construct a homogeneous inorganic-rich SEI in the lithium anode. Meanwhile, the regulated solvation structure weakens the interaction between the solvents and Li⁺, resulting in low Li⁺ desolvation energy and uniform Li deposition. Thus, a high CE (∼96.76%), dendrite-free Li anode, and stable Li plating/stripping cycling for approximately 1000 h are achieved in the regulated carbonate-based electrolyte without any additives. Therefore, regulating the Li⁺ solvation structure in the electrolyte by employing a mesoporous material is a forceful way to construct an ideal SEI and harness lithium metal.

An improved 9 micron thick separator for a 350 Wh/kg lithium metal rechargeable pouch cell

The use of separators that are thinner than conventional separators (> 20 µm) would improve the energy densities and specific energies of lithium batteries. However, thinner separators increase the risk of internal short circuits from lithium dendrites formed in both lithium-ion and lithium metal batteries. Herein, we grow metal-organic frameworks (MOFs) inside the channels of a polypropylene separator (8 µm thick) using current-driven electrosynthesis, which aggregates the electrolyte in the MOF channels. Compared to unmodified polypropylene separators, the MOF-modified separator (9 µm thick) vastly improves the cycling stability and dendrite resistance of cells assembled with Li metal anodes and carbonate-based electrolytes. As a demonstration, a 354 Wh kg⁻¹ pouch cell with a lithium metal anode and LiNi_0.8Co_0.15Al_0.05O₂ (NCA)-based cathode (N/P = 3.96) is assembled with 9 µm layer of the MOF-modified separator and retains 80% of its capacity after 200 cycles (charged at 75 mA g⁻¹, discharged at 100 mA g⁻¹) at 25 °C.

Thin separators can improve batteries’ energy densities but increase cell shortcircuit risks. Here, the authors report an improved thin metal-organic frameworks separator to improve the dendrite formation resistance and cycling stability of high-voltage lithium battery in carbonate electrolytes.

Step-by-step desolvation enables high-rate and ultra-stable sodium storage in hard carbon anodes

Hard carbon is regarded as the most promising anode material for sodium-ion (Na-ion) batteries, owing to its advantages of high abundance, low cost, and low operating potential. However, the rate capability and cycle life span of hard carbon anodes are far from satisfactory, severely hindering its industrial applications. Here, we demonstrate that the desolvation process defines the Na-ion diffusion kinetics and the formation of a solid electrolyte interface (SEI). The 3A zeolite molecular sieve film on the hard carbon is proposed to develop a step-by-step desolvation pathway that effectively reduces the high activation energy of the direct desolvation process. Moreover, step-by-step desolvation yields a thin and inorganic-dominated SEI with a lower activation energy for Na⁺ transport. As a result, it contributes to greatly improved power density and cycling stability for both ester and ether electrolytes. When the above insights are applied, the hard carbon anode achieves the longest life span and minimum capacity fading rate at all evaluated current densities. Moreover, with the increase in current densities, an improved plateau capacity ratio is observed. This step-by-step desolvation strategy comprehensively enhances various properties of hard carbon anodes, which provides the possibility of building practical Na-ion batteries with high power density, high energy density, and durability.

Tailoring the Solvation Sheath of Cations by Constructing Electrode Front-Faces for Rechargeable Batteries

Solvent molecules within the solvation sheath of cations (e.g., Li⁺ , Na⁺ , Zn²⁺ ) are easily to be dehydrogenated especially when coupled with high-voltage cathodes, and lead to detrimental electrolytes decompositions which finally accelerate capacity decays of rechargeable batteries. Tremendous efforts are devoted to tackle with this long-lasting issue. Among them, salt-concentrated strategies are frequently employed to tailor the solvation sheath of cations and improve the stabilities of electrolytes. However, the cost challenges caused by adding extra dose of expensive salts, additives/cosolvents in preparing highly concentrated electrolytes, hinder their further utilizations to some extent. Introducing porous materials-based electrode front-faces on the surface of electrodes even within dilute electrolytes can transfer the high-energy-state desolvated solvents from the reactive electrodes to the nonconductive porous material surfaces, thus eliminate the contact chances between desolvated solvents and electrode materials, and greatly reduce solvents-related decomposition issues. Herein, recent advances in using electrode front-faces to tailor the solvation sheath of metal ions for rechargeable batteries are discussed. Finally, perspectives to the future challenges and opportunities of constructing electrode front-faces to tailor the solvation sheath of cations by constructing electrode front-face for rechargeable batteries are provided.

Electrolyte Engineering for High-Voltage Lithium Metal Batteries

High-voltage lithium metal batteries (HVLMBs) have been arguably regarded as the most prospective solution to ultrahigh-density energy storage devices beyond the reach of current technologies. Electrolyte, the only component inside the HVLMBs in contact with both aggressive cathode and Li anode, is expected to maintain stable electrode/electrolyte interfaces (EEIs) and facilitate reversible Li⁺ transference. Unfortunately, traditional electrolytes with narrow electrochemical windows fail to compromise the catalysis of high-voltage cathodes and infamous reactivity of the Li metal anode, which serves as a major contributor to detrimental electrochemical performance fading and thus impedes their practical applications. Developing stable electrolytes is vital for the further development of HVLMBs. However, optimization principles, design strategies, and future perspectives for the electrolytes of the HVLMBs have not been summarized in detail. This review first gives a systematical overview of recent progress in the improvement of traditional electrolytes and the design of novel electrolytes for the HVLMBs. Different strategies of conventional electrolyte modification, including high concentration electrolytes and CEI and SEI formation with additives, are covered. Novel electrolytes including fluorinated, ionic-liquid, sulfone, nitrile, and solid-state electrolytes are also outlined. In addition, theoretical studies and advanced characterization methods based on the electrolytes of the HVLMBs are probed to study the internal mechanism for ultrahigh stability at an extreme potential. It also foresees future research directions and perspectives for further development of electrolytes in the HVLMBs.