Photo-driven Oxygen Vacancies Extends Charge Carrier Lifetime for Efficient Solar Water Splitting

Mo-doped Co LDHs as Raman enhanced substrate for detection of roxarsine

BACKGROUND

Roxarsone (ROX) is widely used as a feed additive, which is indigestible after ingestion by poultry, and most of it can only be excreted into the natural environment and degraded into highly toxic and carcinogenic inorganic arsenic compounds, which pose a hazard to the ecosystem and human health. However, for roxarsone, traditional detection methods require complex and time-consuming procedures, so it is urgent to find a new fast detection method for detection of ROX.

RESULTS

In this work, we developed a novel Raman enhancement material and utilized the Surface-enhanced Raman scattering (SERS) technique to achieve rapid and sensitive detection of roxarsone. Specifically, Mo-doped cobalt layered double hydroxides (Co-LDHs) semiconductor material (abbreviated as CMM-100) was prepared by a simple method of using ion-assisted MOF etching. Under laser excitation at a wavelength of 532 nm, the CMM-100 showed excellent SERS property to various organic dye molecules such as methylene blue (MB), Toluidine Blue(TB), and Crystal Violet (CV). Especially, an enhancement factor (EF) of 1.4 × 106 was achieved for MB. Compared with the traditional method, this work utilized the fast and non-destructive SERS technology, which achieved a rapid detection of ROX. The detection limit was as low as 9.73 × 10-10 M, and the detection range was from 10-9 M to 10-3 M.

SIGNIFICANCE

In this work, SERS technology was adopted for the rapid and sensitive detection of ROX. This study provides a Raman-enhanced substrate named CMMs for detection of food additives, pesticides, biomolecules, etc., which also broadens the application areas of SERS materials.

Enhancing Photoelectrochemical Water Oxidation on WO3 via Electrochromic Modulation: Universal Effects and Mechanistic Insights

Although WO3 exhibits both electrochromic and photoelectrochemical (PEC) properties, there is no research conducted to investigate the correlation between them. The study herein reports the electrochromic enhancement of PEC activity on WO3. The electrochromic WO3 (e-WO3) exhibits a significantly enhanced activity for PEC water oxidation compared to raw WO3 (r-WO3), with a limiting photocurrent density three times that of r-WO3. The electrochromic enhancement of PEC activity is universal and independent of the type of cations inserted during electrochromism. Decoloring reduces the PEC activity but a simple re-coloring restores the activity to its maximum value. Electrochromism induces large amounts of oxygen vacancies and surface states, the former improving the electron density of WO3 and the latter facilitating the hole transfer across e-WO3/electrolyte interface. It is proved that the electrochromic enhancement effect is due to the significantly improved electron-hole separation efficiency and the charge transfer efficiency across the WO3/electrolyte interface.

Regulated Dual Defects of Bridging Organic and Terminal Inorganic Ligands in Iron-based Metal-Organic Framework Nodes for Efficient Photocatalytic Ammonia Synthesis

Engineering advantageous defects to construct well-defined active sites in catalysts is promising but challenging to achieve efficient photocatalytic NH3 synthesis from N2 and H2O due to the chemical inertness of N2 molecule. Here, we report defective Fe-based metal-organic framework (MOF) photocatalysts via a non-thermal plasma-assisted synthesis strategy, where their NH3 production capability is synergistically regulated by two types of defects, namely, bridging organic ligands and terminal inorganic ligands (OH- and H2O). Specially, the optimized MIL-100(Fe) catalysts, where there are only terminal inorganic ligand defects and coexistence of dual defects, exhibit the respective 1.7- and 7.7-fold activity enhancement comparable to the pristine catalyst under visible light irradiation. As revealed by experimental and theoretical calculation results, the dual defects in the catalyst induce the formation of abundant and highly accessible coordinatively unsaturated Fe active sites and synergistically optimize their geometric and electronic structures, which favors the injection of more d-orbital electrons in Fe sites into the N2 π* antibonding orbital to achieve N2 activation and the formation of a key intermediate *NNH in the reaction. This work provides a guidance on the rational design and accurate construction of porous catalysts with precise defective structures for high-performance activation of catalytic molecules.

Ultrafine Pt Nanoparticles on Defective Tungsten Oxide for Photocatalytic Ethylene Synthesis

The selective conversion of ethane (C2H6) to ethylene (C2H4) under mild conditions is highly wanted, yet very challenging. Herein, it is demonstrated that a Pt/WO3-x catalyst, constructed by supporting ultrafine Pt nanoparticles on the surface of oxygen-deficient tungsten oxide (WO3-x) nanoplates, is efficient and reusable for photocatalytic C2H6 dehydrogenation to produce C2H4 with high selectivity. Specifically, under pure light irradiation, the optimized Pt/WO3-x photocatalyst exhibits C2H4 and H2 yield rates of 291.8 and 373.4 µmol g-1 h-1, respectively, coupled with a small formation of CO (85.2 µmol g-1 h-1) and CH4 (19.0 µmol g-1 h-1), corresponding to a high C2H4 selectivity of 84.9%. Experimental and theoretical studies reveal that the vacancy-rich WO3-x catalyst enables broad optical harvesting to generate charge carriers by light for working the redox reactions. Meanwhile, the Pt cocatalyst reinforces adsorption of C2H6, desorption of key reaction species, and separation and migration of light-induced charges to promote the dehydrogenation reaction with high productivity and selectivity. In situ diffuse reflectance infrared Fourier transform spectroscopy and density functional theory calculation expose the key intermediates formed on the Pt/WO3-x catalyst during the reaction, which permits the construction of the possible C2H6 dehydrogenation mechanism.

Tuning Surface Electronics State of P-Doped In2.77S4/In(OH)3 toward Efficient Photoelectrochemical Water Oxidation

Indium sulfide with a two-dimensional layered structure offers a platform for catalyzing water oxidation by a photoelectrochemical process. However, the limited hole holders hinder the weak intrinsic catalytic activity. Here, the nonmetallic phosphorus atom is coordinated to In2.77S4/In(OH)3 through a bridge-bonded sulfur atom. By substituting the S position by the P dopant, the work function (surface potential) is regulated from 445 to 210 mV, and the lower surface potential is shown to be beneficial for holding the photogenerated holes. In2.77S4/In(OH)3/P introduces a built-in electric field under the difference of Fermi energy, and the direction is from the bulk to the surface. This band structure results in upward band bending at the interface of In2.77S4/In(OH)3 and P-doped sites, which is identified by density functional theory calculations (∼0.8 eV work function difference). In2.77S4/In(OH)3/P stands out with the highest oxidation efficiency (ηoxi = 70%) and charge separation efficiency (ηsep = 69%). Importantly, it delivers a remarkable water oxidation photocurrent density of 2.51 mA cm-2 under one sun of illumination.

Dodecahedral hollow multi-shelled Co3O4/Ag:ZnIn2S4 photocatalyst for enhancing solar energy utilization efficiency

Employing semiconductor photocatalysts featuring a hollow multi-shelled (HoMs) structure to establish a heterojunction is an effective approach to addressing the issues of low light energy utilization and severe recombination of photogenerated charge carriers. To take advantage of these key factors in semiconductor photocatalysis, here, a dodecahedral HoMs Co3O4/Ag:ZnIn2S4 photocatalyst (denoted as Co3O4/AZIS) was firstly synthesized by coupling Ag+-doped ZnIn2S4 (AZIS) nanosheets with dodecahedral HoMs Co3O4. The unique HoMs structure of the photocatalyst can not only effectively promote the separation and transfer of photo-induced charge, but also improve the utilization rate of visible light, exposing rich active sites for the photocatalytic redox reaction. The photocatalytic experiment results showed that the Co3O4/90.0 wt% AZIS photocatalyst has a high hydrogen (H2) production rate (695.0 μmol h-1 g-1) and high methyl orange (MO) degradation rate (0.4243 min-1). This work provides a feasible strategy for the development of HoMs heterojunction photocatalysts with enhanced H2 production and degradation properties of organic dyes.

Defect Engineering of WO3 by Rapid Flame Reduction for Efficient Photoelectrochemical Conversion of Methane into Liquid Oxygenates

Photoelectrochemical (PEC) conversion is a promising way to use methane (CH4) as a chemical building block without harsh conditions. However, the PEC conversion of CH4 to value-added chemicals remains challenging due to the thermodynamically favorable overoxidation of CH4. Here, we report WO3 nanotube (NT) photoelectrocatalysts for PEC CH4 conversion with high liquid product selectivity through defect engineering. By tuning the flame reduction treatment, we carefully controlled the oxygen vacancies of WO3 NTs. The optimally reduced WO3 NTs suppressed overoxidation of CH4 showing a high total C1 liquid selectivity of 69.4% and a production rate of 0.174 μmol cm-2 h-1. Scanning electrochemical microscopy revealed that oxygen vacancies can restrain the production of hydroxyl radicals, which, in excess, could further oxidize C1 intermediates to CO2. Additionally, band diagram analysis and computational studies elucidated that oxygen vacancies thermodynamically suppress overoxidation. This work introduces a strategy for understanding and controlling the selectivity of photoelectrocatalysts for direct conversion of CH4 to liquids.

Accelerate charge separation in Cu2O/MoO2 photocathode for photoelectrocatalytic hydrogen evolution

Photoelectrocatalyzing water reduction is a potential approach to building a green and sustainable society. As a benchmark photocathode, Cu2O receives much attention but faces serious charge recombination and photocorrosion. This work prepared an excellent Cu2O/MoO2 photocathode via in situ electrodeposition. A systematical study of theory and experiment demonstrates that MoO2 not only effectively passivates the surface state of Cu2O as well as accelerates reaction kinetics as a cocatalyst, but also promotes the directional migration and separation of photogenerated charge. As expected, the constructed photocathode exhibits a highly enhanced photocurrent density and an appealing energy transformation efficacy. Importantly, MoO2 can inhibit the reduction of Cu+ in Cu2O via a formed internal electric field and shows excellent photoelectrochemical stability. These findings pave the way to designing a high-activity photocathode with high stability.

Superhydrophilic CoFe Dispersion of Hydrogel Electrocatalysts for Quasi-Solid-State Photoelectrochemical Water Splitting

Photoelectrochemical (PEC) water splitting is an attractive strategy to convert solar energy to hydrogen. However, the lifetime of PEC devices is restricted by the photocorrosion of semiconductors and the instability of co-catalysts. Herein, we report a feasible in situ inherent cross-linking method for stabilizing semiconductors that uses a CoFe-dispersed polyacrylamide (PAM) hydrogel as a transparent protector. The CoFe-PAM hydrogel protected BiVO4 (BVO) photoanode reached a photocurrent density of 5.7 mA cm-2 at 1.23 VRHE under AM 1.5G illumination with good stability. The PAM hydrogel network improved the loading of Fe sites while enabling the retention of more CoFe co-catalysts and increasing the electron density of the reaction active sites, further improving the PEC performance and stability. More importantly, by tuning the polymerization network, we pioneer the use of quasi-solid-state electrolytes in photoelectrochemistry, where the high concentration of ionic solvent in the PAM hydrogel ensures effective charge transport and good water storage owing to the hydrophilic and porous structure of the hydrogel. This work expands the scope of PEC research by providing a class of three-dimensional hydrogel electrocatalysts and quasi-solid-state electrolytes with huge extension potential, and the versatility of these quasi-solid-state electrolytes can be employed for other semiconductors.

Photoelectrochemical Engineering for Light-Assisted Rechargeable Metal Batteries: Mechanism, Development, and Future

Rechargeable battery devices with high energy density are highly demanded by  our  modern society. The use of metal anodes is extremely attractive for future rechargeable battery devices. However, the notorious metal dendritic and instability of solid electrolyte interface issues pose a series of challenges for metal anodes. Recently, considering the indigestible dynamical behavior of metal anodes, photoelectrochemical engineering of light-assisted metal anodes have been rapidly developed since they efficiently utilize the integration and synergy of oriented crystal engineering and photocatalysis engineering, which provided a potential way to unlock the interface electrochemical mechanism and deposition reaction kinetics of metal anodes. This review starts with the fundamentals of photoelectrochemical engineering and follows with the state-of-art advance of photoelectrochemical engineering for light-assisted rechargeable metal batteries where photoelectrode materials, working principles, types, and practical applications are explained. The last section summarizes the major challenges and some invigorating perspectives for future research on light-assisted rechargeable metal batteries.

Enhancing Photocatalytic Degradation via the Synergetic Effect of Vacancies and Built-In Potential in a BiOCl/BiVO4 p-n Heterojunction

Photoinduced charge separation and surface reactions are essential for ensuring high quantum efficiency of the photochemical and photophysical processes. BiVO4-based heterojunctions are promising materials for high-performance photocatalysts; however, their photocatalytic performance is significantly lower than the theoretical limit due to the sluggish water oxidation dynamics and rapid recombination of charge carriers on the catalyst surface. To address these issues, oxygen vacancies (OVs) are introduced to a rationally designed BiVO4-based heterojunction using built-in potential and gradient OVs to promote the separation of carriers and increase the photocatalytic activity. The heterojunctions with OVs exhibit a 2-fold increase in the photocatalytic activity for phenol degradation compared with that of pristine BiVO4. Additionally, density functional theory is applied to elucidate the synergistic mechanism of light absorption and charge separation in BiOCl/BiVO4 p-n heterojunction photocatalysts containing vacancies. The obtained results demonstrate a synergistic effect of vacancies and the built-in potential, providing a pathway for defect engineering in photocatalytic processes.

Surface Oxygen Species in Metal Oxide Photoanodes for Solar Energy Conversion

Converting and storing solar energy directly as chemical energy through photoelectrochemical devices are promising strategies to replace fossil fuels. Metal oxides are commonly used as photoanode materials, but they still encounter challenges such as limited light absorption, inefficient charge separation, sluggish surface reactions, and insufficient stability. The regulation of surface oxygen species on metal oxide photoanodes has emerged as a critical strategy to modulate molecular and charge dynamics at the reaction interface. However, the precise role of surface oxygen species in metal oxide photoanodes remains ambiguous. The review focuses on elucidating the formation and regulation mechanisms of various surface oxygen species in metal oxides, their advantages and disadvantages in photoelectrochemical reactions, and the characterization methods employed to investigate them. Additionally, the article discusses emerging opportunities and potential hurdles in the regulation of surface oxygen species. By shedding light on the significance of surface oxygen species, this review aims to advance our understanding of their impact on metal oxide photoanodes, paving the way for the design of more efficient and stable photoelectrochemical devices.

Edge-Sharing Octahedrally Coordinated NiFe Dual Active Sites on ZnFe2 O4 for Photoelectrochemical Water Oxidation

The structural properties of octahedral sites (B_Oh ) in spinel oxides (AB₂ O₄ ) play vital roles in the electrochemical performance of oxygen-related reactions. However, the precise manipulation of AB₂ O₄ remains challenging due to the complexity of their crystal structure. Here, a simple and versatile molten-salt-mediated strategy is reported to introduce Ni²⁺ in B_oh sites intentionally on the surface of zinc ferrite (ZnFe₂ O₄ , ZFO) to promote the active sites for photoelectrochemical (PEC) water splitting. The as-created photoanode (ZFO-MSNi) shows a remarkable cathodic shift of ≈ 450 mV (turn-on voltage of ≈ 0.6 V_RHE ) as well as three times the 1-sun photocurrent density at 1.23 V_RHE for PEC water oxidation in comparison with bare ZFO. A comprehensive structural characterization clearly reveals the local structure of the introduced Ni²⁺ in ZFO-MSNi. Fewer surface trapping states are observed while the precisely introduced Ni²⁺ and associated neighboring Fe^(3-σ)+ (0<σ<1) sites unite in an edge-sharing octahedral configuration to function as NiFe dual active sites for PEC water oxidation. Moreover, open circuit potential measurements and rapid-scan voltammetry investigation give further insight into the enhanced PEC performance. Overall, this work displays a versatile strategy to regulate the surface active sites of photoelectrodes for increasing performance in PEC solar energy conversion systems.

Subsurface Engineering Induced Fermi Level De-pinning in Metal Oxide Semiconductors for Photoelectrochemical Water Splitting

Photoelectrochemical (PEC) water splitting is a promising approach for renewable solar light conversion. However, surface Fermi level pinning (FLP), caused by surface trap states, severely restricts the PEC activities. Theoretical calculations indicate subsurface oxygen vacancy (sub-O_v ) could release the FLP and retain the active structure. A series of metal oxide semiconductors with sub-O_v were prepared through precisely regulated spin-coating and calcination. Etching X-ray photoelectron spectroscopy (XPS), scanning transmission electron microscopy (STEM), and electron energy loss spectra (EELS) demonstrated O_v located at sub ∼2-5 nm region. Mott-Schottky and open circuit photovoltage results confirmed the surface trap states elimination and Fermi level de-pinning. Thus, superior PEC performances of 5.1, 3.4, and 2.1 mA cm^-2 at 1.23 V vs. RHE were achieved on BiVO₄ , Bi₂ O₃ , TiO₂ with outstanding stability for 72 h, outperforming most reported works under the identical conditions.

Tuning oxygen vacancy in Bi2WO6 by heteroatom doping for enhanced photooxidation-reduction properties

Heteroatom doping was recently regarded as an effective method to tune the band gap and improve the separation and transfer of photogenerated electron-hole pairs in semiconductor photocatalysts. Herein, a novel S,F-codoped Bi2WO6 (S,F-Bi2WO6) with suitable oxygen vacancies was synthesized via the hydrothermal-calcination and post-sulfurization, for efficient Cr(VI) reduction and methyl orange (MO) degradation under visible light. The amount of surface oxygen vacancies could be controlled by adjusting the S/F ratio during the doping process, which modulated the band structure and photogenerated charge behavior of Bi2WO6. The optimal S0.10F-Bi2WO6 exhibited an excellent photooxidation-reduction performance, which Cr(VI) reduction and MO degradation efficiencies were 1.6 and 2.6 times than those of the pristine Bi2WO6 without oxygen vacancy under visible-light, respectively. The enhanced photooxidation-reduction performance was because the right amount of oxygen vacancies could effectively narrow the bandgap and improve the separation efficiency of electron-hole pairs. Thus, this work offered a mild and simply approach for preparing heteroatom doped Bi2WO6 and a potential to be extended to the synthesis of other doped materials for environmental remediation.

Cerium-Doped Iron Oxide Nanorod Arrays for Photoelectrochemical Water Splitting

In this work, a simple one-step hydrothermal method was employed to prepare the Ce-doped Fe₂O₃ ordered nanorod arrays (CFT). The Ce doping successfully narrowed the band gap of Fe₂O₃, which improved the visible light absorption performance. In addition, with the help of Ce doping, the recombination of electron/hole pairs was significantly inhibited. The external voltage will make the performance of the Ce-doped sample better. Therefore, the Ce-doped Fe₂O₃ has reached superior photoelectrochemical (PEC) performance with a high photocurrent density of 1.47 mA/cm² at 1.6 V vs. RHE (Reversible Hydrogen Electrode), which is 7.3 times higher than that of pristine Fe₂O₃ nanorod arrays (FT). The Hydrogen (H₂) production from PEC water splitting of Fe₂O₃ was highly improved by Ce doping to achieve an evolution rate of 21 μmol/cm²/h.

Engineering the Near-Surface Structure of WO3 by an Amorphous Layer with Trivalent Ni and Self-Adapting Oxygen Vacancies for Efficient Photocatalytic and Photoelectrochemical Acidic Oxygen Evolution Reaction

Exploiting an effective strategy to tailor the construction, composition, and local electronic structure of the photocatalyst surface is pivotal to photocatalytic activity, but remains challenging. Transition metal elements can boost the oxygen evolution reaction activity especially one like Ni in high oxidation states, whereas it is uneasy to prepare Ni³⁺ under mild conditions or play to their strengths in acidic conditions. In this article, we report a facile "etch and dope" synthesis of Ni³⁺-doped WO₃ nanosheets with oxygen vacancies. Through detailed experimental and theoretical studies, it is established that the abundant oxygen vacancies and the doped Ni³⁺ ions in the near-surface amorphous layer can synergistically optimize the surface electronic structure of WO₃ and the adsorption and desorption of intermediates. Impressively, the etched WO₃ nanosheets coupled with Ni³⁺ offer a greatly promoted photocatalytic performance of 1.78 mmol g^-1 h^-1, and the photoanode achieves a photocurrent density of 2.11 mA cm^-2 at 1.23 V versus reversible hydrogen electrode (V_RHE). This work provides a new inspiration for rational manufacture of defects and high-valence metal ions in catalysts for photocatalytic and photoelectrochemical reactions.

Crystal Facet-Modulated WO3 Nanoplate Photoanode for Photoelectrochemical Glyoxal Semi-oxidation into Glyoxylic Acid

Transforming glyoxal to value-added glyoxylic acid (GA) is highly desirable but challenging due to the uncontrollable over-oxidation. In this work, we report on a first demonstration of semi-oxidation of glyoxal with high selectivity (86.5%) and activity on WO₃ nanoplate photoanode through the photoelectrochemical strategy. The optimization of reactivity was achieved via crystal facet regulation, showing a satisfactory GA production rate of 308.4 mmol m^-2 h^-2, 84.0% faradaic efficiency, and 4.3% total solar-to-glyoxylic acid efficiency on WO₃ with enriched {200} facets at 1.6 V versus RHE. WO₃ with a high {200} facet ratio exhibits more efficient electron-hole transfer kinetics, resulting in the facilitated formation of hydroxyl radicals (^•OH) and glyoxal radicals. Meanwhile, the theoretical calculation results indicate that the high selectivity and activity come from the strong adsorption ability for glyoxal and the low reaction energy for glyoxal radical generation on the (200) facets of WO₃. Moreover, the high energy demand toward oxalic acid production on WO₃ leads to the exciting semi-oxidation process.

Hybrid Ce-Fe2O3/ZIF-67 Photoanode with Efficient Photoelectrochemical Water Oxidation Performance

Surface states and slow water oxidation kinetics greatly limit the photoelectrochemical (PEC) water oxidation performance of Fe₂O₃. To solve the above problems, coupling Fe₂O₃ with a passivation layer and an oxygen evolution cocatalyst, respectively, is the common method. Though this method may improve its PEC performance, this also results in a low charge-transfer efficiency caused by the interface resistance between Fe₂O₃ and the modification materials (passivation layer and oxygen evolution cocatalyst). Therefore, it is important to identify a multifunctional modifier material to reduce the interfacial resistance due to the presence of multiple different materials. In this work, we introduced a thin cobalt-based metal-organic framework layer (ZIF-67) as a dual-functional material that acted as both a passivation layer and a water oxidation cocatalyst for a photoanode based on Ce-Fe₂O₃ nanorod arrays. The ZIF-67 layer inhibited charge carrier recombination by passivating the surface states. The PEC performance was improved due to the rich Co²⁺ photogenerated hole-capture sites, which facilitated charge transfer and separation. As expected, the Ce-Fe₂O₃/ZIF-67 photoanode exhibited superior water oxidation performance, with a photocurrent of 2.07 mA cm^-2 at 1.23 V_RHE, which is 1.74 times higher than that of the Ce-Fe₂O₃ photoanode. The onset potential was negatively shifted by 71 mV. This study provides basic insights and a strategy for reducing interfacial resistance in hybrid materials.

A Transparent, High-Performance, and Stable Sb2 S3 Photoanode Enabled by Heterojunction Engineering with Conjugated Polycarbazole Frameworks for Unbiased Photoelectrochemical Overall Water Splitting Devices

Developing low-cost, high-performance, and durable photoanodes is essential in solar-driven photoelectrochemical (PEC) energy conversion. Sb₂ S₃ is a low-bandgap (≈1.7 eV) n-type semiconductor with a maximum theoretical solar conversion efficiency of ≈28% for PEC water splitting. However, bulk Sb₂ S₃ exhibits opaque characteristics and suffers from severe photocorrosion, and thus the use of Sb₂ S₃ as a photoanode material remains underexploited. This study describes the design and fabrication of a transparent Sb₂ S₃ -based photoanode by conformably depositing a thin layer of conjugated polycarbazole frameworks (CPF-TCzB) onto the Sb₂ S₃ film. This structural design creates a type-II heterojunction between the CPF-TCzB and the Sb₂ S₃ with a suitable band-edge energy offset, thereby, greatly enhancing the charge separation efficiency. The CPF-TCzB/Sb₂ S₃ hybrid photoanode exhibits a remarkable photocurrent density of 10.1 mA cm^-2 at 1.23 V vs reversible hydrogen electrode. Moreover, the thin CPF-TCzB overlayer effectively inhibits photocorrosion of the Sb₂ S₃ and enables long-term operation for at least 100 h with ≈10% loss in photocurrent density. Furthermore, a standalone unbiased PEC tandem device comprising a CPF-TCzB/Sb₂ S₃ photoanode and a back-illuminated Si photocathode can achieve a record solar-to-hydrogen conversion efficiency of 5.21%, representing the most efficient PEC water splitting device of its kind.

Harvesting the infrared part of solar light to promote charge transfer in Bi2S3/WO3 photoanode for enhanced photoelectrochemical water splitting

Infrared light absorbed by semiconductors hardly contributes to the solar energy conversion due to its low photon energy. Herein, photothermal effect activated by infrared part of solar light is introduced to promote the photoelectrochemical (PEC) water splitting of photoanodes. Narrow band-gap semiconductor Bi₂S₃ is deposited on the surface of WO₃ nanosheets, exhibiting a broad-spectral response. In addition to the enhanced density of photo-generated electrons, significant temperature elevation is observed for the Bi₂S₃/WO₃ composite photoanode under the illumination of infrared part of solar light because of the photothermal conversion property of Bi₂S₃. The moderately enhanced temperature accelerates charge carrier migration and finally increases the efficiency of solar energy conversion. With the assistance of photothermal effect, a remarkable photocurrent density of 4.05 mA cm^-2 at 1.23 V vs. reversible reference electrode (V_RHE) is achieved by Bi₂S₃/WO₃ composite photoanode, over 880% higher than that of the pristine WO₃. The introduction of photothermal effect activated by infrared light provides general and robust strategy to promote the PEC performance of photoanodes.

Effect of a Cocatalyst on a Photoanode in Water Splitting: A Study of Scanning Electrochemical Microscopy

With a proper band gap of ∼2.4 eV for solar light absorption and suitable valence band edge position for oxygen evolution, scheelite-monoclinic bismuth vanadate (BiVO₄) has become one of the most attractive photocatalysts for efficient visible-light-driven photoelectrochemical (PEC) water splitting. Several studies have indicated that surface modification of BiVO₄ with a cocatalyst such as NiFe layered double hydroxide (LDH) can significantly increase the PEC water splitting performance of the catalyst. Herein, we experimentally investigated the charge transfer dynamics and charge carrier recombination processes by scanning electrochemical microscopy (SECM) with the feedback mode on the surface of BiVO₄ and BiVO₄/NiFe-LDH as model samples. The ratio of rate constants for photogenerated hole (k_h+⁰) to electron (k_e-⁰) via the photocatalyst of BiVO₄/NiFe-LDH reacting with the redox couple is found to be five times larger than that of BiVO₄ under illumination. In this case, the ratio of the rate constants k_h+⁰/k_e-⁰ stands for the interfacial charge recombination process. This implies the cocatalyst NiFe-LDH suppresses the electron back transfer greatly and finally reduces the surface recombination. Control experiments with cocatalysts CoPi and RuO_x onto BiVO₄ further verify this conclusion. Therefore, the SECM characterization allows us to make an overall analysis on the function of cocatalysts in the PEC water splitting system.