Boosting CO2 Electroreduction over a Cadmium Single-Atom Catalyst by Tuning of the Axial Coordination Structure

Single-atom nanozymes for antibacterial applications

Bacteria have always been a thorny problem that threatens human health and food safety. Conventional antibiotic treatment often leads to the emergence of drug resistance. Therefore, the development of more effective antibacterial agents is urgently needed. Single-atom nanozymes (SAzymes) can efficiently eliminate bacteria due to their high atomic utilization, abundant active centers, and good natural enzyme mimicry, providing a potential alternative choice for antibiotics in antibacterial applications. Here, the antibacterial applications of SAzymes are reviewed and their catalytic properties are discussed from the aspects of active sites, coordination environment regulation and carrier selection. Then, the antibacterial effect of SAzymes is elaborated in combination with photothermal therapy (PTT) and sonodynamic therapy (SDT). Finally, the problems faced by SAzymes in antibacterial applications and their future development potential are proposed.

Anion Modulation of Ag-Imidazole Cuboctahedral Cage Microenvironments for Efficient Electrocatalytic CO2 Reduction

How to achieve CO2 electroreduction in high efficiency is a current challenge with the mechanism not well understood yet. The metal-organic cages with multiple metal sites, tunable active centers, and well-defined microenvironments may provide a promising catalyst model. Here, we report self-assembly of Ag4L4 type cuboctahedral cages from coordination dynamic Ag+ ion and triangular imidazolyl ligand 1,3,5-tris(1-benzylbenzimidazol-2-yl) benzene (Ag-MOC-X, X=NO3, ClO4, BF4) via anion template effect. Notably, Ag-MOC-NO3 achieves the highest CO faradaic efficiency in pH-universal electrolytes of 86.1 % (acidic), 94.1 % (neutral) and 95.3 % (alkaline), much higher than those of Ag-MOC-ClO4 and Ag-MOC-BF4 with just different counter anions. In situ attenuated total reflection Fourier transform infrared spectroscopy observes formation of vital intermediate *COOH for CO2-to-CO conversion. The density functional theory calculations suggest that the adsorption of CO2 on unsaturated Ag-site is stabilized by C-H⋅⋅⋅O hydrogen-bonding of CO2 in a microenvironment surrounded by three benzimidazole rings, and the activation of CO2 is dependent on the coordination dynamics of Ag-centers modulated by the hosted anions through Ag⋅⋅⋅X interactions. This work offers a supramolecular electrocatalytic strategy based on Ag-coordination geometry and host-guest interaction regulation of MOCs as high-efficient electrocatalysts for CO2 reduction to CO which is a key intermediate in chemical industry process.

Mechanistic insights into high-throughput screening of tandem catalysts for CO2 reduction to multi-carbon products

In carbon dioxide electrochemical reduction (CO2ER), since isolated catalysts encounter challenges in meeting the demands of intricate processes for producing multi-carbon (C2+) products, tandem catalysis is emerging as a promising approach. Nevertheless, there remains an insufficient theoretical understanding of designing tandem catalysts. Herein, we utilized density functional theory (DFT) to screen 80 tandem catalysts for efficient CO2ER to C2 products systematically, which combines the advantages of nitrogen-doped carbon-supported transition metal single-atom catalysts (M-N-C) and copper clusters. Three crucial criteria were designed to select structures for generation and transfer of *CO and facilitate C-C coupling. The optimal Cu/RuN4-pl catalyst exhibited an excellent ethanol production capacity. Additionally, the relationship between CO adsorption strength and transfer energy barrier was established, and the influence of the electronic structure on its adsorption strength was studied. This provided a novel and well-considered solution and theoretical guidance for the design of rational composition and structurally superior tandem catalysts.

Organizing Photosensitive and Photothermal Single-Sites Uniformly in a Trimetallic Metal-Organic Framework for Efficient Photocatalytic Hydrogen Evolution

Effective combination of the photosensitivity and photothermal property in photocatalyst is vital to achieve the maximum light utilization for superior photocatalytic efficiency. Herein, this work successfully organizes photosensitive Cd-NS single-sites and photothermal Ni-NS single-sites uniformly at a molecular level within a tailored trimetallic metal-organic framework. The optimized Ho6-Cd0.76Ni0.24-NS exhibits a superior photocatalytic hydrogen evolution rate of 40.06 mmol g-1 h-1 under visible-light irradiation and an apparent quantum efficiency of 29.37% at 420 nm without using cocatalysts or photosensitizers. A systematical mechanism study reveals that the uniformly organized photosensitive and photothermal single-sites have synergistic effect, which form ultrashort pathways for efficient transport of photoinduced electrons, suppress the recombination of photogenerated charge carriers, hence promote the hydrogen evolution activity. This work provides a promising approach for organizing dual-functional single-sites uniformly in photocatalyst for high-performance photocatalytic activity.

Advances and challenges in the electrochemical reduction of carbon dioxide

The electrocatalytic carbon dioxide reduction reaction (ECO2RR) is a promising way to realize the transformation of waste into valuable material, which can not only meet the environmental goal of reducing carbon emissions, but also obtain clean energy and valuable industrial products simultaneously. Herein, we first introduce the complex CO2RR mechanisms based on the number of carbons in the product. Since the coupling of C-C bonds is unanimously recognized as the key mechanism step in the ECO2RR for the generation of high-value products, the structural-activity relationship of electrocatalysts is systematically reviewed. Next, we comprehensively classify the latest developments, both experimental and theoretical, in different categories of cutting-edge electrocatalysts and provide theoretical insights on various aspects. Finally, challenges are discussed from the perspectives of both materials and devices to inspire researchers to promote the industrial application of the ECO2RR at the earliest.

Rare-earth Element-based Electrocatalysts Designed for CO2 Electro-reduction

Electrochemical CO2 reduction presents a promising approach for synthesizing fuels and chemical feedstocks using renewable energy sources. Although significant advancements have been made in the design of catalysts for CO2 reduction reaction (CO2RR) in recent years, the linear scaling relationship of key intermediates, selectivity, stability, and economical efficiency are still required to be improved. Rare earth (RE) elements, recognized as pivotal components in various industrial applications, have been widely used in catalysis due to their unique properties such as redox characteristics, orbital structure, oxygen affinity, large ion radius, and electronic configuration. Furthermore, RE elements could effectively modulate the adsorption strength of intermediates and provide abundant metal active sites for CO2RR. Despite their potential, there is still a shortage of comprehensive and systematic analysis of RE elements employed in the design of electrocatalysts of CO2RR. Therefore, the current approaches for the design of RE element-based electrocatalysts and their applications in CO2RR are thoroughly summarized in this review. The review starts by outlining the characteristics of CO2RR and RE elements, followed by a summary of design strategies and synthetic methods for RE element-based electrocatalysts. Finally, an overview of current limitations in research and an outline of the prospects for future investigations are proposed.

Modulating the Structure and Composition of Single-Atom Electrocatalysts for CO2 reduction

Electrochemical CO2 reduction reaction (eCO2 RR) is a promising strategy to achieve carbon cycling by converting CO2 into value-added products under mild reaction conditions. Recently, single-atom catalysts (SACs) have shown enormous potential in eCO2 RR due to their high utilization of metal atoms and flexible coordination structures. In this work, the recent progress in SACs for eCO2 RR is outlined, with detailed discussions on the interaction between active sites and CO2 , especially the adsorption/activation behavior of CO2 and the effects of the electronic structure of SACs on eCO2 RR. Three perspectives form the starting point: 1) Important factors of SACs for eCO2 RR; 2) Typical SACs for eCO2 RR; 3) eCO2 RR toward valuable products. First, how different modification strategies can change the electronic structure of SACs to improve catalytic performance is discussed; Second, SACs with diverse supports and how supports assist active sites to undergo catalytic reaction are introduced; Finally, according to various valuable products from eCO2 RR, the reaction mechanism and measures which can be taken to improve the selectivity of eCO2 RR are discussed. Hopefully, this work can provide a comprehensive understanding of SACs for eCO2 RR and spark innovative design and modification ideas to develop highly efficient SACs for CO2 conversion to various valuable fuels/chemicals.

Bimetal-bridging Nitrogen Coordination in Carbon-based Electrocatalysts for pH-universal Oxygen Reduction

Electrocatalysts with atomically dispersed metal sites (e.g., metal-nitrogen-carbon) have been deemed as promising alternatives for noble-metal catalysts in couples of electrocatalytic reactions. However, the modulation of such atomic sites and the understanding of their interactions are still highly challenging. Herein, we propose a unique supermolecule assembly-profile coating strategy to prepare a series of diatomic electrocatalysts by profile coating of eight Prussian blue analogues (PBAs) on supramolecular supports respectively as bimetallic sources. The detailed microstructure analysis revealed that the metal-nitrogen-carbon sites with four- (Zn-N4 ) and five-coordination (Fe-N5 ) via the nitrogen coordination are similar to the cytochrome c oxidases. For promising electrocatalysis, such unique microstructure is able to activate oxygen molecules due to nitrogen-bonding coordination with bimetal sites, thus leading to efficient four-electron oxygen reduction in alkaline, neutral, and acid electrolytes. Especially, zinc group elements (e.g., Zn and Cd) with d10 electron configuration would significantly boost the nitrogen-bonding coordination with bimetal sites to enhance electrocatalytic activity. The proof-of-concept for the general synthesis of advanced electrocatalysts with controllable bimetal active sites and the mechanistic understanding will promote the promising electrocatalysis by applying the similar principles.

Dual-axial engineering on atomically dispersed catalysts for ultrastable oxygen reduction in acidic and alkaline solutions

Atomically dispersed catalysts are a promising alternative to platinum group metal catalysts for catalyzing the oxygen reduction reaction (ORR), while limited durability during the electrocatalytic process severely restricts their practical application. Here, we report an atomically dispersed Co-doped carbon-nitrogen bilayer catalyst with unique dual-axial Co-C bonds (denoted as Co/DACN) by a smart phenyl-carbon-induced strategy, realizing highly efficient electrocatalytic ORR in both alkaline and acidic media. The corresponding half-wave potential for ORR is up to 0.85 and 0.77 V (vs. reversible hydrogen electrode (RHE)) in 0.5 M H2SO4 and 0.1 M KOH, respectively, representing the best ORR activity among all non-noble metal catalysts reported to date. Impressively, the Zn-air battery (ZAB) equipped with Co/DACN cathode achieves outstanding durability after 1,688 h operation at 10 mA cm-2 with a high current density (154.2 mA cm-2) and a peak power density (210.1 mW cm-2). Density functional theory calculations reveal that the unique dual-axial cross-linking Co-C bonds of Co/DACN significantly enhance the stability during ORR and also facilitate the 4e- ORR pathway by forming a joint electron pool due to the improved interlayer electron mobility. We believe that axial engineering opens a broad avenue to develop high-performance heterogeneous electrocatalysts for advanced energy conversion and storage.

Bioinspired Tandem Electrode for Selective Electrocatalytic Synthesis of Ammonia from Aqueous Nitrate

The electrocatalytic nitrate reduction reaction (NO3RR) has recently emerged as a promising technique for readily converting aqueous nitrate (NO3-) pollutants into valuable ammonia (NH3). It is vital to thoroughly understand the mechanism of the reaction to rationally design and construct advanced electrocatalytic systems that can effectively and selectively drive the NO3RR. There are several natural enzymes that incorporate molybdenum (Mo) and that can activate NO3-. Based on this, a cadmium (Cd) single-atom anchored Mo2TiC2Tx electrocatalyst (referred to as CdSA-Mo2TiC2Tx) through the NO3RR to generate NH3 was rationally designed and demonstrated. In an H-type electrolysis cell and at a current density of 42.5 mA cm-2, the electrocatalyst had a Faradaic efficiency of >95% and an impressive NH3 yield rate of 48.5 mg h-1 cm-2. Moreover, the conversion of NO3- to NH3 on the CdSA-Mo2TiC2Tx surface was further revealed by operando attenuated total reflection Fourier-transform infrared spectroscopy and an electrochemical differential mass spectrometer. The electrocatalyst significantly outperformed Mo2TiC2Tx as well as reported state-of-the-art catalysts. Density functional theory calculations revealed that CdSA-Mo2TiC2Tx decreased the ability of the d-p orbital to hybridize with NH3* intermediates, thereby decreasing the activation energy of the potential-determining step. This work not only highlights the application prospects of heavy metal single-atom catalysts in the NO3RR but also provides examples of bio-inspired electrocatalysts for the synthesis of NH3.

Review of Carbon Support Coordination Environments for Single Metal Atom Electrocatalysts (SACS)

This topical review focuses on the distinct role of carbon support coordination environment of single-atom catalysts (SACs) for electrocatalysis. The article begins with an overview of atomic coordination configurations in SACs, including a discussion of the advanced characterization techniques and simulation used for understanding the active sites. A summary of key electrocatalysis applications is then provided. These processes are oxygen reduction reaction (ORR), oxygen evolution reaction (OER), hydrogen evolution reaction (HER), nitrogen reduction reaction (NRR), and carbon dioxide reduction reaction (CO2 RR). The review then shifts to modulation of the metal atom-carbon coordination environments, focusing on nitrogen and other non-metal coordination through modulation at the first coordination shell and modulation in the second and higher coordination shells. Representative case studies are provided, starting with the classic four-nitrogen-coordinated single metal atom (MN4 ) based SACs. Bimetallic coordination models including homo-paired and hetero-paired active sites are also discussed, being categorized as emerging approaches. The theme of the discussions is the correlation between synthesis methods for selective doping, the carbon structure-electron configuration changes associated with the doping, the analytical techniques used to ascertain these changes, and the resultant electrocatalysis performance. Critical unanswered questions as well as promising underexplored research directions are identified.

Precise Design and Modification Engineering of Single-Atom Catalytic Materials for Oxygen Reduction

Due to their unique electronic and structural properties, single-atom catalytic materials (SACMs) hold great promise for the oxygen reduction reaction (ORR). Coordinating environmental and engineering strategies is the key to improving the ORR performance of SACMs. This review summarizes the latest research progress and breakthroughs of SACMs in the field of ORR catalysis. First, the research progress on the catalytic mechanism of SACMs acting on ORR is reviewed, including the latest research results on the origin of SACMs activity and the analysis of pre-adsorption mechanism. The study of the pre-adsorption mechanism is an important breakthrough direction to explore the origin of the high activity of SACMs and the practical and theoretical understanding of the catalytic process. Precise coordination environment modification, including in-plane, axial, and adjacent site modifications, can enhance the intrinsic catalytic activity of SACMs and promote the ORR process. Additionally, several engineering strategies are discussed, including multiple SACMs, high loading, and atomic site confinement. Multiple SACMs synergistically enhance catalytic activity and selectivity, while high loading can provide more active sites for catalytic reactions. Overall, this review provides important insights into the design of advanced catalysts for ORR.

Atomic Distance Engineering in Metal Catalysts to Regulate Catalytic Performance

It is very important to understand the structure-performance relationship of metal catalysts by adjusting the microstructure of catalysts at the atomic scale. The atomic distance has an essential influence on the composition of the environment of active metal atom, which is a key factor for the design of targeted catalysts with desired function. In this review, we discuss and summarize strategies for changing the atomic distance from three aspects and relate their effects on the reactivity of catalysts. First, the effects of regulating bond length between metal and coordination atom at one single-atom site on the catalytic performance are introduced. The bond lengths are affected by the strain effect of the support and high-shell doping and can evolve during the reaction. Next, the influence of the distance between single-atom sites on the catalytic performance is discussed. Due to the space matching of adsorption and electron transport, the catalytic performance can be adjusted with the shortening of site distance. In addition, the effect of the arrangement spacing of the surface metal active atoms on the catalytic performance of metal nanocatalysts is studied. Finally, a comprehensive summary and outlook of the relationship between atomic distance and catalytic performance is given.

Cd/Cd(OH)2 Nanosheets Enhancing the Electrocatalytic Activity of CO2 Reduction to CO

Electric-driven conversion of carbon dioxide (CO2 ) to carbon monoxide (CO) under mild reaction conditions offers a promising approach to mitigate the greenhouse effect and the energy crisis. Surface engineering is believed to be one of the prospective methods for enhancing the electrocatalytic activity of CO2 reduction. Herein, hydroxyl (OH) groups were successfully introduced to cadmium nanosheets to form cadmium and cadmium hydroxide nanocomposites (i. e. Cd/Cd(OH)2 nanosheets) via a facile two-step method. The as-prepared Cd/Cd(OH)2 /CP (CP indicates carbon paper) electrode displays excellent electrocatalytic activity for CO2 reduction to produce CO. The Faradaic efficiency of CO reaches 98.3 % and the current density achieves 23.8 mA cm-2 at -2.0 V vs. Ag/Ag+ in a CO2 -saturated 30 wt% 1-butyl-3-methylimidazole hexafluorophosphate ([Bmim]PF6 )-65 wt% acetonitrile (CH3 CN)-5 wt% water (H2 O) electrolyte. And the CO partial current density can reach up to 71.6 mA cm-2 with the CO Faradaic efficiency of more than 85 % at -2.3 V vs. Ag/Ag+ , which stands out against Cd/CP, Cd(OH)2 /CP, and Cd/CdO/CP electrodes. The excellent electrocatalytic performance of the Cd/Cd(OH)2 /CP electrode can be attributed to its unique structural properties, suitable OH groups, perfect interaction with electrolyte, abundant active sites and fast electron transfer rate.

Boron-Doped Nickel-Nitrogen-Carbon Single-Atom Catalyst for Boosting Electrochemical CO2 Reduction

Tuning the coordination environment of the metal center in metal-nitrogen-carbon (M-N-C) single-atom catalysts via heteroatom-doping (oxygen, phosphorus, sulfur, etc.) is effective for promoting electrocatalytic CO2 reduction reaction (CO2 RR). However, few studies are investigated establishing efficient CO2 reduction by introducing boron (B) atoms to regulate the M-N-C structure. Herein, a B-C3 N4 self-sacrifice strategy is developed to synthesize B, N co-coordinated Ni single atom catalyst (Ni-BNC). X-ray absorption spectroscopy and high-angle annular dark field scanning transmission electron microscopy confirm the structure (Ni-N3 B/C). The Ni-BNC catalyst presents a maximum CO Faradaic efficiency (FECO ) of 98.8% and a large CO current density (jCO ) of -62.9 mA cm-2 at -0.75 and -1.05 V versus reversible hydrogen electrode, respectively. Furthermore, FECO could be maintained above 95% in a wide range of potential windows from -0.65 to -1.05 V. In situ experiments and density functional theory calculations demonstrate the Ni-BNC catalyst with B atoms coordinated to the central Ni atoms could significantly reduce the energy barrier for the conversion of *CO2 to *COOH, leading to excellent CO2 RR performance.

Spatial Position Regulation of Cu Single Atom Site Realizes Efficient Nanozyme Photocatalytic Bactericidal Activity

Recently, single-atom nanozymes have made significant progress in the fields of sterilization and treatment, but their catalytic performance as substitutes for natural enzymes and drugs is far from satisfactory. Here, a method is reported to improve enzyme activity by adjusting the spatial position of a single-atom site on the nanoplatforms. Two types of Cu single-atom site nanozymes are synthesized in the interlayer (CuL /PHI) and in-plane (CuP /PHI) of poly (heptazine imide) (PHI) through different synthesis pathways. Experimental and theoretical analysis indicates that the interlayer position of PHI can effectively adjust the coordination number, coordination bond length, and electronic structure of Cu single atoms compared to the in-plane position, thereby promoting photoinduced electron migration and O2 activation, enabling effective generate reactive oxygen species (ROS). Under visible light irradiation, the photocatalytic bactericidal activity of CuL /PHI against aureus is ≈100%, achieving the same antibacterial effect as antibiotics, after 10 min of low-dose light exposure and 2 h of incubation.

Continuous electroproduction of formate via CO2 reduction on local symmetry-broken single-atom catalysts

Atomic-level coordination engineering is an efficient strategy for tuning the catalytic performance of single-atom catalysts (SACs). However, their rational design has so far been plagued by the lack of a universal correlation between the coordination symmetry and catalytic properties. Herein, we synthesised planar-symmetry-broken CuN3 (PSB-CuN3) SACs through microwave heating for electrocatalytic CO2 reduction. Remarkably, the as-prepared catalysts exhibited a selectivity of 94.3% towards formate at -0.73 V vs. RHE, surpassing the symmetrical CuN4 catalyst (72.4% at -0.93 V vs. RHE). In a flow cell equipped with a PSB-CuN3 electrode, over 90% formate selectivity was maintained at an average current density of 94.4 mA cm-2 during 100 h operation. By combining definitive structural identification with operando X-ray spectroscopy and theoretical calculations, we revealed that the intrinsic local symmetry breaking from planar D4h configuration induces an unconventional dsp hybridisation, and thus a strong correlation between the catalytic activity and microenvironment of metal centre (i.e., coordination number and distortion), with high preference for formate production in CuN3 moiety. The finding opens an avenue for designing efficient SACs with specific local symmetries for selective electrocatalysis.

Ultra-fast synthesis of three-dimensional porous Cu/Zn heterostructures for enhanced carbon dioxide electroreduction

The construction of metal hetero-interfaces has great potential in the application of electro-catalytic carbon dioxide reduction (ECR). Herein, we report a fast, efficient, and simple electrodeposition strategy for synthesizing three-dimensional (3D) porous Cu/Zn heterostructures using the hydrogen bubble template method. When the deposition was carried out at -1.0 A for 30 s, the obtained 3D porous Cu/Zn heterostructures on carbon paper (CP) demonstrated a nearly 100% CO faradaic efficiency (FE) with a high partial current density of 91.8 mA cm-2 at -2.1 V vs. Ag/Ag+ in the mixed electrolyte of ionic liquids/acetonitrile in an H-type cell. In particular, the partial current density of CO could reach 165.5 mA cm-2 and the FE of CO could remain as high as 94.3% at -2.5 V vs. Ag/Ag+. The current density is much higher than most reported to date in an H-type cell (Table S1). Experimental and density functional theory (DFT) calculations reveal that the outstanding electrocatalytic performance of the electrode can be ascribed to the formation of 3D porous Cu/Zn heterostructures, in which the porous and self-supported architecture facilitates diffusion and the Cu/Zn heterostructures can reduce the energy barrier for ECR to CO.

Advances on Axial Coordination Design of Single-Atom Catalysts for Energy Electrocatalysis: A Review

Single-atom catalysts (SACs) have garnered increasingly growing attention in renewable energy scenarios, especially in electrocatalysis due to their unique high efficiency of atom utilization and flexible electronic structure adjustability. The intensive efforts towards the rational design and synthesis of SACs with versatile local configurations have significantly accelerated the development of efficient and sustainable electrocatalysts for a wide range of electrochemical applications. As an emergent coordination avenue, intentionally breaking the planar symmetry of SACs by adding ligands in the axial direction of metal single atoms offers a novel approach for the tuning of both geometric and electronic structures, thereby enhancing electrocatalytic performance at active sites. In this review, we briefly outline the burgeoning research topic of axially coordinated SACs and provide a comprehensive summary of the recent advances in their synthetic strategies and electrocatalytic applications. Besides, the challenges and outlooks in this research field have also been emphasized. The present review provides an in-depth and comprehensive understanding of the axial coordination design of SACs, which could bring new perspectives and solutions for fine regulation of the electronic structures of SACs catering to high-performing energy electrocatalysis.

Introducing Bidirectional Axial Coordination into BiVO4 @Metal Phthalocyanine Core-Shell Photoanodes for Efficient Water Oxidation

Core-shell photoanodes have shown great potential for photoelectrochemical (PEC) water oxidation. However, the construction of a high-quality interface between the core and shell, as well as a highly catalytic surface, remains a challenge. Herein, guided by computation, we present a BiVO4 photoanode coated with ZnCoFe polyphthalocyanine using pyrazine as a coordination agent. The bidirectional axial coordination of pyrazine plays a dual role by facilitating intimate interfacial contact between BiVO4 and ZnCoFe polyphthalocyanine, as well as regulating the electron density and spin configuration of metal sites in ZnCoFe phthalocyanine, thereby promoting the potential-limiting step of *OOH desorption. The resulting photoanode displayed a high photocurrent density of 5.7±0.1 mA cm-2 at 1.23 VRHE . This study introduces a new approach for constructing core-shell photoanodes, and uncovers the key role of pyrazine axial coordination in modulating the catalytic activity of metal phthalocyanine.

Customization from Single to Dual Atomic Sites for Efficient Electrocatalytic CO2 Reduction to Value-added Chemicals

In recent years, single-atom catalysts (SACs) have received increasing attention in the field of electrochemical CO2 RR with their efficient atom utilization efficiency and excellent catalytic performance. However, their low metal loading and the presence of linear relationships for single active sites with simple structures possibly restrict their activity and practical applications. Active site tailoring at the atomic level is a visionary approach to break the existing limitations of SACs. This paper first briefly introduces the synthesis strategies of SACs and DACs. Then, combining previous experimental and theoretical studies, this paper introduces four optimization strategies, namely spin-state tuning engineering, axial functionalization engineering, ligand engineering, and substrate tuning engineering, for improving the catalytic performance of SACs in the electrochemical CO2 RR process by combining previous experimental and theoretical studies. Then it is introduced that DACs exhibit significant advantages over SACs in increasing metal atom loading, promoting the adsorption and activation of CO2 molecules, modulating intermediate adsorption, and promoting C-C coupling. At the end of this paper, we briefly and succinctly summarize the main challenges and application prospects of SACs and DACs in the field of electrochemical CO2 RR at present.

Enhanced the Efficiency of Electrocatalytic CO2 -to-CO Conversion by Cd Species Anchored into Metal-Organic Framework

Metal-organic frameworks (MOFs) as a promising platform for electrocatalytic CO2 conversion are still restricted by the low efficiency or unsatisfied selectivity for desired products. Herein, zirconium-based porphyrinic MOF hollow nanotubes with Cd sites (Cd-PCN-222HTs) are reported for electrocatalytic CO2 -to-CO conversion. The dispersed Cd species are anchored in PCN-222HTs and coordinated by N atoms of porphyrin structures. It is discovered that Cd-PCN-222HTs have glorious electrocatalytic activity for selective CO production in ionic liquid-water (H2 O)-acetonitrile (MeCN) electrolyte. The CO Faradaic efficiency (FECO ) of >80% could be maintained in a wide potential range from -2.0 to -2.4 V versus Ag/Ag+ , and the maximum current density could reach 68.0 mA cm-2 at -2.4 V versus Ag/Ag+ with a satisfied turnover frequency of 26 220 h-1 . The enhanced efficiency of electrocatalytic CO2 conversion of Cd-PCN-222HTs is closely related to its hollow structure, anchored Cd species, and good synergistic effect with electrolyte. The density functional theory calculations indicate that the dispersed Cd sites anchored in PCN-222HTs not only favor the formation of *COOH intermediate but also hinder the hydrogen evolution reaction, resulting in high activity of electrocatalytic CO2 -to-CO conversion.

Performance Regulation of Single-Atom Catalyst by Modulating the Microenvironment of Metal Sites

Metal-based catalysts, encompassing both homogeneous and heterogeneous types, play a vital role in the modern chemical industry. Heterogeneous metal-based catalysts usually possess more varied catalytically active centers than homogeneous catalysts, making it challenging to regulate their catalytic performance. In contrast, homogeneous catalysts have defined active-site structures, and their performance can be easily adjusted by modifying the ligand. These characteristics lead to remarkable conceptual and technical differences between homogeneous and heterogeneous catalysts. As a recently emerging class of catalytic material, single-atom catalysts (SACs) have become one of the most active new frontiers in the catalysis field and show great potential to bridge homogeneous and heterogeneous catalytic processes. This review documents a brief introduction to SACs and their role in a range of reactions involving single-atom catalysis. To fully understand process-structure-property relationships of single-atom catalysis in chemical reactions, active sites or coordination structure and performance regulation strategies (e.g., tuning chemical and physical environment of single atoms) of SACs are comprehensively summarized. Furthermore, we discuss the application limitations, development trends and future challenges of single-atom catalysis and present a perspective on further constructing a highly efficient (e.g., activity, selectivity and stability), single-atom catalytic system for a broader scope of reactions.

Altering Ligand Microenvironment of Atomically Dispersed CrN4 by Axial Ligand Sulfur for Enhanced Oxygen Reduction Reaction in Alkaline and Acidic Medium

Because of the instability and Fenton reactivity of non-precious metal nitrogen-carbon based catalyst when processing the oxygen reduction reaction (ORR), seeking for electrocatalysts with highly efficient performance becomes very highly desired to speed up the commercialization of fuel cell. Herein, chromium (Cr)-N₄  electrocatalyst containing extraterrestrial S formed axial S₁ -Cr₁ N₄  bonds (S₁ Cr₁ N₄ C) is achieved via an assembly polymerization and confined pyrolysis strategy. Benefiting from the adjusting  coordination configuration and electronic structure of the metal center through axial coordination, S₁ Cr₁ N₄ C exhibits enhanced the intrinsic activity (half-wave potential (E_1/2 ) is 0.90 V versus reversable hydrogen electrode, RHE) compared with that of CrN₄ C and Pt/C catalysts. More notably, the catalyst is almost inert in catalyzing the Fenton reaction, and thus shows the high stability. Density functional theory (DFT) results further reveal that the existence of axial S atoms in S₁ Cr₁ N₄ C moiety has the better ORR activity than Cr₁ N₄ C moieties. The axial S ligand in S₁ Cr₁ N₄ C moiety can break the electron localization around the planar Cr₁ N₄  active center, which facilitated the rate-limiting reductive release of OH* and accelerated overall ORR process. The present work opens up a new avenue to modulate the axial ligand type of the single-atoms (SAs) active center to enhance intrinsic SAs performances.

Challenges and Perspectives of Single-Atom-Based Catalysts for Electrochemical Reactions

Single-atom catalysts (SACs) are emerging as the most promising catalysts for various electrochemical reactions. The isolated dispersion of metal atoms enables high density of active sites, and the simplified structure makes them ideal model systems to study the structure-performance relationships. However, the activity of SACs is still insufficient, and the stability of SACs is usually inferior but has received little attention, hindering their practical applications in real devices. Moreover, the catalytic mechanism on a single metal site is unclear, leading the development of SACs to rely on trial-and-error experiments. How can one break the current bottleneck of active sites density? How can one further increase the activity/stability of metal sites? In this Perspective, we discuss the underlying reasons for the current challenges and identify precisely controlled synthesis involving designed precursors and innovative heat-treatment techniques as the key for the development of high-performance SACs. In addition, advanced operando characterizations and theoretical simulations are essential for uncovering the true structure and electrocatalytic mechanism of an active site. Finally, future directions that may arise breakthroughs are discussed.

Rational design of heterogenized molecular phthalocyanine hybrid single-atom electrocatalyst towards two-electron oxygen reduction

Single-atom catalysts supported on solid substrates have inspired extensive interest, but the rational design of high-efficiency single-atom catalysts is still plagued by ambiguous structure determination of active sites and its local support effect. Here, we report hybrid single-atom catalysts by an axial coordination linkage of molecular cobalt phthalocyanine with carbon nanotubes for selective oxygen reduction reaction by screening from a series of metal phthalocyanines via preferential density-functional theory calculations. Different from conventional heterogeneous single-atom catalysts, the hybrid single-atom catalysts are proven to facilitate rational screening of target catalysts as well as understanding of its underlying oxygen reduction reaction mechanism due to its well-defined active site structure and clear coordination linkage in the hybrid single-atom catalysts. Consequently, the optimized Co hybrid single-atom catalysts exhibit improved 2e^- oxygen reduction reaction performance compared to the corresponding homogeneous molecular catalyst in terms of activity and selectivity. When prepared as an air cathode in an air-breathing flow cell device, the optimized hybrid catalysts enable the oxygen reduction reaction at 300 mA cm^-2 exhibiting a stable Faradaic efficiency exceeding 90% for 25 h.

Operando Spectroscopic Analysis of Axial Oxygen-Coordinated Single-Sn-Atom Sites for Electrochemical CO2 Reduction

Sn-based materials have been demonstrated as promising catalysts for the selective electrochemical CO₂ reduction reaction (CO₂RR). However, the detailed structures of catalytic intermediates and the key surface species remain to be identified. In this work, a series of single-Sn-atom catalysts with well-defined structures is developed as model systems to explore their electrochemical reactivity toward CO₂RR. The selectivity and activity of CO₂ reduction to formic acid on Sn-single-atom sites are shown to be correlated with Sn(IV)-N₄ moieties axially coordinated with oxygen (O-Sn-N₄), reaching an optimal HCOOH Faradaic efficiency of 89.4% with a partial current density (j_HCOOH) of 74.8 mA·cm^-2 at -1.0 V vs reversible hydrogen electrode (RHE). Employing a combination of operando X-ray absorption spectroscopy, attenuated total reflectance surface-enhanced infrared absorption spectroscopy, Raman spectroscopy, and ¹¹⁹Sn Mössbauer spectroscopy, surface-bound bidentate tin carbonate species are captured during CO₂RR. Moreover, the electronic and coordination structures of the single-Sn-atom species under reaction conditions are determined. Density functional theory (DFT) calculations further support the preferred formation of Sn-O-CO₂ species over the O-Sn-N₄ sites, which effectively modulates the adsorption configuration of the reactive intermediates and lowers the energy barrier for the hydrogenation of *OCHO species, as compared to the preferred formation of *COOH species over the Sn-N₄ sites, thereby greatly facilitating CO₂-to-HCOOH conversion.

Rational design of atomic site catalysts for electrochemical CO2 reduction

Renewable-energy-powered electrochemical CO₂ reduction (ECR) is a promising way of transforming CO₂ to value-added products and achieving sustainable carbon recycling. By virtue of the extremely high exposure rate of active sites and excellent catalytic performance, atomic site catalysts (ASCs), including single-atomic site catalysts and diatomic site catalysts, have attracted considerable attention. In this feature article, we focus on the rational design strategies of ASCs developed in recent years for the ECR reaction. The influence of these strategies on the activity and selectivity of ASCs for ECR is further discussed in terms of electronic regulation, synergistic activation, microenvironmental regulation and tandem catalytic system construction. Finally, the challenges and future directions are indicated. We hope that this feature article will be helpful in the development of novel ASCs for ECR.

Cu/Cu2O nanocrystals for electrocatalytic carbon dioxide reduction to multi-carbon products

We demonstrate the electrochemical conversion of carbon dioxide into multi-carbon products catalyzed by Cu/Cu₂O nanocrystals, with a maximum C₂₊ faradaic efficiency of 75% in 0.10 M K₂SO₄ aqueous solution at -2.0 V versus Ag/AgCl and a partial current density of 34 mA cm^-2.

Oxygen-Bridged Indium-Nickel Atomic Pair as Dual-Metal Active Sites Enabling Synergistic Electrocatalytic CO2 Reduction

Single-atom catalysts offer a promising pathway for electrochemical CO₂ conversion. However, it is still a challenge to optimize the electrochemical performance of dual-atom catalysts. Here, an atomic indium-nickel dual-sites catalyst bridged by an axial oxygen atom (O-In-N₆ -Ni moiety) was anchored on nitrogenated carbon (InNi DS/NC). InNi DS/NC exhibits superior CO selectivity with Faradaic efficiency higher than 90 % over a wide potential range from -0.5 to -0.8 V versus reversible hydrogen electrode (vs. RHE). Moreover, an industrial CO partial current density up to 317.2 mA cm^-2 is achieved at -1.0 V vs. RHE in a flow cell. In situ ATR-SEIRAS combined with theory calculations reveal that the synergistic effect of In-Ni dual-sites and O atom bridge not only reduces the reaction barrier for the formation of *COOH, but also retards the undesired hydrogen evolution reaction. This work provides a feasible strategy to construct dual-site catalysts towards energy conversion.

Axial Phosphate Coordination in Co Single Atoms Boosts Electrochemical Oxygen Evolution

Cobalt single atoms coordinated with planar four nitrogen atoms (Co₁ N₄ ) represent an efficient electrocatalyst for oxygen evolution reaction (OER), whereas the large energy barrier of CoOH dehydrogenation limits the OER activity. Herein, axial phosphate (PO₄ ) coordination is incorporated in Co₁ N₄ single atoms of cobalt phthalocyanine@carbon nanotubes (P-CoPc@CNT), so as to boost the intrinsic OER performance through manipulating the reaction pathway. With a relative low mass loading of Co (2.7%), the P-CoPc@CNT shows remarkable alkaline OER activity with the overpotential of 300 mV and Tafel slope of 41.7 mV dec^-1 , which dramatically outperforms the CoPc@CNT without axial PO₄ coordination. Based on mechanistic analysis, the axial PO₄ coordination directly participates in the OER cycle by the transformation of axial ligand. Specially, the CoOH dehydrogenation process is replaced by the dehydrogenation of HPO₄ -Co₁ N₄ intermediate, which largely decreases the energy barrier and thus benefits the whole OER process.

Nature-Inspired Design of Molybdenum-Selenium Dual-Single-Atom Electrocatalysts for CO2 Reduction

Electrochemical CO₂ reduction (ECR) is becoming an increasingly important technology for achieving carbon neutrality. Inspired by the structure of naturally occurring Mo-dependent enzymes capable of activating CO₂ , a heteronuclear Mo-Se dual-single-atom electrocatalyst (MoSA-SeSA) for ECR into CO with a Faradaic efficiency of above 90% over a broad potential window from -0.4 to -1.0 V versus reversible hydrogen electrode is demonstrated here. Both operando characterization and theoretical simulation results verify that MoSA acts as central atoms that directly interact with the ECR feedstock and intermediates, whereas the SeSA adjacent to MoSA modulates the electronic structure of MoSA through long-range electron delocalization for inhibiting MoSA poisoning caused by strong CO adsorption. In addition, the SeSAs far from MoSA help suppress the competing hydrogen evolution side reaction and accelerate the CO₂ transport by repelling H₂ O. This work provides new insight into the precise regulation and in-depth understanding of multisite synergistic catalysis at the atomic scale.

Single Atom Catalysts with Out-of-Plane Coordination Structure on Conjugated Covalent Organic Frameworks

Adjusting the local coordination environment of single-atom electrocatalysts is a viable way to improve catalytic performance. The diversity of coordination geometric structures is limited to the traditional in-plane configuration, with only a little consideration paid to out-of-plane configurations due to the lack of suitable carriers and fabrication methods. This study reports out-of-plane coordination of Co-based single-atom catalysts mediated by the conjugated bipyridine-rich covalent organic framework (COF). The bipyridine nitrogen on the COF layer backbone of these catalysts serves as the linker center for cobalt sites anchoring, while the complementary moieties are coordinated at the other side of the Co metal and reside beyond the COF backbone plane, thus yielding out-of-plane coordination. The electrochemical experiments and density functional theory calculations reveal that catalysts with multiple out-of-plane coordinations exhibit different electrocatalytic oxygen evolution activities and catalytic pathways. The out-of-plane coordination enabled by COFs provides a strategy for designing single-atom electrocatalysts, expanding the application of COFs in the field of electrocatalysis.

Super-Coordinated Nickel N4 Ni1 O2 Site Single-Atom Catalyst for Selective H2 O2 Electrosynthesis at High Current Densities

Electrochemical production of hydrogen peroxide (H₂ O₂ ) from O₂ on single-atom catalysts has attracted great attention, yet the quest for robust catalysts is driven by achieving >90 % Faradaic efficiency (FE) under industrial-relevant current densities (>100 mA cm^-2 ). Herein we synthesize a catalyst that contains single nickel site coordinated by four nitrogen and two oxygen atoms (i.e., N₄ Ni₁ O₂ ) via involving carboxyl functionalized multiwall carbon nanotubes as a substrate to provide extra O coordination to the regular NiN₄ site. It has a cathodic energy efficiency of approximately 82 % and a H₂ O₂ FE of around 96 % at 200 mA cm^-2 current density, outperforming the reported single-atom catalysts for H₂ O₂ electrosynthesis.

Microenvironment Modulation in Carbon-Supported Single-Atom Catalysts for Efficient Electrocatalytic CO2 Reduction

The electrocatalytic CO 2 reduction reaction (ECRR) becomes an effective way to reduce excess CO 2 in the air and a promising strategy to maintain carbon balance. Carbon-supported single-atom catalysts (C-SACs) is a kind of cost savings and most promising catalysts for ECRR. For C-SACs, the key to achieving efficient ECRR performance is to adjusting the electronic structure of the central metal atoms by modulating their microenvironment of the catalysts. Not only the coordination numbers and hetero-atom coordination, but also the regulation of diatomic sites have a great influence on the performance of C-SACs. This review mainly focuses on recent studies for the microenvironment modulation in C-SACs for efficient ECRR. We hope that this review can contribute readers a comprehensive insight in the current research status of C-SACs for ECRR, as well as provide help for the rational design of C-SACs with better ECRR performance.

Cobalt Single Atoms Anchored on Oxygen-Doped Tubular Carbon Nitride for Efficient Peroxymonosulfate Activation: Simultaneous Coordination Structure and Morphology Modulation

Simultaneous regulation of the coordination environment of single-atom catalysts (SACs) and engineering architectures with efficient exposed active sites are efficient strategies for boosting peroxymonosulfate (PMS) activation. We isolated cobalt atoms with dual nitrogen and oxygen coordination (Co-N₃ O₁ ) on oxygen-doped tubular carbon nitride (TCN) by pyrolyzing a hydrogen-bonded cyanuric acid melamine-cobalt acetate precursor. The theoretically constructed Co-N₃ O₁ moiety on TCN exhibited an impressive mass activity of 7.61×10⁵  min^-1  mol^-1 with high ¹ O₂ selectivity. Theoretical calculations revealed that the cobalt single atoms occupied a dual nitrogen and oxygen coordination environment, and that PMS adsorption was promoted and energy barriers reduced for the key *O intermediate that produced ¹ O₂ . The catalysts were attached to a widely used poly(vinylidene fluoride) microfiltration membrane to deliver an antibiotic wastewater treatment system with 97.5 % ciprofloxacin rejection over 10 hours, thereby revealing the suitability of the membrane for industrial applications.

Controlled Modification of Axial Coordination for Transition-Metal Single-Atom Electrocatalyst

Single-atom catalysts (SACs) have emerged as a new frontier in areas such as electrocatalysis, photocatalysis, and enzymatic catalysis. Aided by recent advances in the synthetic methodologies of nanomaterials, atomic characterization technologies, and theoretical calculation modeling, various SACs have been prepared for a variety of catalytic reactions. To meet the requirements of SACs with distinctive performance and appreciable selectivity, much research has been carried out to adjust the coordination configuration and electronic properties of SACs. This concept summarizes the latest advances in the experimental and computational efforts aimed at tuning the axial coordination of SACs. Series of atoms, functional groups or even macrocycles are oriented into the atomic metal center, and how this affects the electrocatalytic performance is also reviewed. Finally, this concept presents perspectives for the further precise design, preparation and in-situ detection of axially coordinated SACs.

Engineering the Local Atomic Environments of Indium Single-Atom Catalysts for Efficient Electrochemical Production of Hydrogen Peroxide

The in-depth understanding of local atomic environment-property relationships of p-block metal single-atom catalysts toward the 2 e^- oxygen reduction reaction (ORR) has rarely been reported. Here, guided by first-principles calculations, we develop a heteroatom-modified In-based metal-organic framework-assisted approach to accurately synthesize an optimal catalyst, in which single In atoms are anchored by combined N,S-dual first coordination and B second coordination supported by the hollow carbon rods (In SAs/NSBC). The In SAs/NSBC catalyst exhibits a high H₂ O₂ selectivity of above 95 % in a wide range of pH. Furthermore, the In SAs/NSBC-modified natural air diffusion electrode exhibits an unprecedented production rate of 6.49 mol peroxide g_catalyst ^-1  h^-1 in 0.1 M KOH electrolyte and 6.71 mol peroxide g_catalyst ^-1  h^-1 in 0.1 M PBS electrolyte. This strategy enables the design of next-generation high-performance single-atom materials, and provides practical guidance for H₂ O₂ electrosynthesis.