Surface Density Dependent Catalytic Activity of Single Palladium Atoms Supported on Ceria*

Fundamental Structural and Electronic Understanding of Palladium Catalysts on Nitride and Oxide Supports

The nature of the support can fundamentally affect the function of a heterogeneous catalyst. For the novel type of isolated metal atom catalysts, sometimes referred to as single-atom catalysts, systematic correlations are still rare. Here, we report a general finding that Pd on nitride supports (non-metal and metal nitride) features a higher oxidation state compared to that on oxide supports (non-metal and metal oxide). Through thorough oxidation state investigations by X-ray absorption spectroscopy (XAS), X-ray photoelectron spectroscopy (XPS), CO-DRIFTS, and density functional theory (DFT) coupled with Bader charge analysis, it is found that Pd atoms prefer to interact with surface hydroxyl group to form a Pd(OH)x species on oxide supports, while on nitride supports, Pd atoms incorporate into the surface structure in the form of Pd-N bonds. Moreover, a correlation was built between the formal oxidation state and computational Bader charge, based on the periodic trend in electronegativity.

Nickel Single Atom Density-Dependent CO2 Efficient Electroreduction

The transition metal-nitrogen-carbon (M─N─C) with MNx sites has shown great potential in CO2 electroreduction (CO2RR) for producing high value-added C1 products. However, a comprehensive and profound understanding of the intrinsic relationship between the density of metal single atoms and the CO2RR performance is still lacking. Herein, a series of Ni single-atom catalysts is deliberately designed and prepared, anchored on layered N-doped graphene-like carbon (x Ni1@NG-900, where x represents the Ni loading, 900 refers to the temperature). By modulating the precursor, the density of Ni single atoms (DNi) can be finely tuned from 0.01 to 1.19 atoms nm-2. The CO2RR results demonstrate that the CO faradaic efficiency (FECO) predominantly increases from 13.4% to 96.2% as the DNi increased from 0 to 0.068 atoms nm-2. Then the FECO showed a slow increase from 96.2% to 98.2% at -0.82 V versus reversible hydrogen electrode (RHE) when DNi increased from 0.068 to 1.19 atoms nm-2. The theoretical calculations are in good agreement with experimental results, indicating a trade-off relationship between DNi and CO2RR performance. These findings reveal the crucial role of the density of Ni single atoms in determining the CO2RR performance of M─N─C catalysts.

Boosting the catalytic performance of Al2O3-supported Pd catalysts by introducing CeO2 promoters

Maintaining the stability of noble metals is the key to the long-term stability of supported catalysts. In response to the instability of noble metal species at high temperatures, we developed a synergistic strategy of dual oxide supports. By designing and constructing ceria components with small sizes, we have achieved unity in the ability of catalytic materials to supply oxygen and stabilize metal species. In this study, we prepared Al2O3-CeO2-Pd (AlCePd) catalysts containing trace amounts of Ce through the hydrolysis of cerium acetate, which achieved 100% CO conversion at 160 °C. More importantly, the activity remained at its initial 100% in the long-term durability testing, demonstrating the high stability of AlCePd. In contrast, the CO conversion of the CeO2-Pd (CePd) catalyst decreased from 100% to 54% within 3 h. Through comprehensive studies, we found that this excellent catalytic performance stems from the stabilizing effect of an alumina support and the possible reverse oxygen spillover effect of small-sized ceria components, where small-sized ceria components provide active oxygen for independent Pd species, making it possible for the CO adsorbed on Pd to react with this oxygen species.

GSH-depleting metal-polyphenol-network nanoparticles with dual enzyme activities induce enhanced ferroptosis

Ferroptosis is a non-apoptotic form of regulated cell death. The efficiency of ferroptosis is restrained in the tumor microenvironment (TME) by overexpression of glutathione (GSH) and insufficient production of hydrogen peroxide (H2O2). In this work, theranostic nanoparticles Ce-aMOFs@Fe3+-EGCG, termed MEFs, are developed by coating uniform Ce-based amorphous metal-organic frameworks (Ce-aMOFs) with epigallocatechin gallate (EGCG) and Fe3+. Fe3+ is chelated by the adjacent phenol hydroxyl groups in EGCG. In the tumor cell interior, overexpressed GSH and weak acidic medium degrade the coating to release Fe3+ and EGCG accompanied by exposure of Ce-aMOFs. Fe3+ and EGCG consume GSH along with turning Fe3+ into Fe2+. Ce-aMOFs act as a nanozyme possessing dual-enzymatic activities, i.e. superoxide dismutase (SOD)- and phosphatase-like activities. In the TME, Ce-aMOFs catalyze the conversion of endogenous superoxide (O2˙-) into H2O2, and Fe2+ catalyzes H2O2 to generate toxic hydroxyl radicals (˙OH), which may further induce tumor cell death through ferroptosis. In addition, the phosphatase-like activity of Ce-aMOFs may sustainably dephosphorylate NADPH and effectively inhibit intracellular biosynthesis of GSH. Therefore, MEFs ensure down-regulation of intracellular GSH levels and up-regulation of oxidative pressure, which enhance the ferroptosis effect.

Size of cerium dioxide support nanocrystals dictates reactivity of highly dispersed palladium catalysts

The catalytic performance of heterogeneous catalysts can be tuned by modulation of the size and structure of supported transition metals, which are typically regarded as the active sites. In single-atom metal catalysts, the support itself can strongly affect the catalytic properties. Here, we demonstrate that the size of cerium dioxide (CeO₂) support governs the reactivity of atomically dispersed palladium (Pd) in carbon monoxide (CO) oxidation. Catalysts with small CeO₂ nanocrystals (~4 nanometers) exhibit unusually high activity in a CO-rich reaction feed, whereas catalysts with medium-size CeO₂ (~8 nanometers) are preferred for lean conditions. Detailed spectroscopic investigations reveal support size-dependent redox properties of the Pd-CeO₂ interface.

Recent progresses on single-atom catalysts for the removal of air pollutants

The booming industrialization has aggravated emission of air pollutants, inflicting serious harm on environment and human health. Supported noble-metals are one of the most popular catalysts for the oxidation removal of air pollutants. Unfortunately, the high price and large consumption restrict their development and practical application. Single-atom catalysts (SACs) emerge and offer an optimizing approach to address this issue. Due to maximal atom utilization, tunable coordination and electron environment and strong metal-support interaction, SACs have shown remarkable catalytic performance on many reactions. Over the last decade, great potential of SACs has been witnessed in the elimination of air pollutants. In this review, we first briefly summarize the synthesis methods and modulation strategies together with the characterization techniques of SACs. Next, we highlight the application of SACs in the abatement of air pollutants including CO, volatile organic compounds (VOCs) and NOx, unveiling the related catalytic mechanism of SACs. Finally, we propose the remaining challenges and future perspectives of SACs in fundamental research and practical application in the field of air pollutant removal.

Building up libraries and production line for single atom catalysts with precursor-atomization strategy

Having the excellent catalytic performance, single atom catalysts (SACs) arouse extensive research interest. However, the application of SACs is hindered by the lack of versatile and scalable preparation approaches. Here, we show a precursor-atomization strategy to produce SACs, involving the spray of droplets of solutions containing metal precursors onto support surface through ultrasonic atomization and the subsequent calcination. This approach is versatile to successful synthesis of a series of catalysts, including 19 SACs with different metal sites and supports and 3 derivatives of SACs (single atom alloys, double atom catalysts and bi-metallic SACs). Furthermore, it can be scaled up by a homemade production line with productivity over 1 kg day^-1, and the well-controlled catalyst uniformity is evidenced by the identical characterization results and catalytic properties in Suzuki-Miyaura cross-coupling. This strategy lays a foundation for further investigation and may accelerate the trend from basic research to industrial applications of SACs.

Unique catalytic mechanisms of methanol dehydrogenation at Pd-doped ceria: A DFT+U study

Pd-doped ceria is highly active in promoting oxidative dehydrogenation (ODH) reactions and also a model single atom catalyst (SAC). By performing density functional theory calculations corrected by on-site Coulomb interactions, we systematically studied the physicochemical properties of the Pd-doped CeO₂(111) surface and the catalytic methanol to formaldehyde reaction on the surface. Two different configurations were located for the Pd dopant, and the calculated results showed that doping of Pd will make the surface more active with lower oxygen vacancy formation energies than the pristine CeO₂(111). Moreover, two different pathways for the dehydrogenation of CH₃OH to HCHO on the Pd-doped CeO₂(111) were determined, one of which is the conventional two-step process (stepwise pathway) with the O-H bond of CH₃OH being broken first followed by the C-H bond cleavage, while the other is a novel one-step process (concerted pathway) involving the two H being dissociated from CH₃OH simultaneously even with a lower energy barrier than the stepwise one. With electronic and structural analyses, we showed that the direct reduction of Pd⁴⁺ to Pd²⁺ through the transfer of two electrons can outperform the separated Ce⁴⁺ to Ce³⁺ processes with the help of configurational evolution at the Pd site, which is responsible for the existence of such one-step dehydrogenation process. This novel mechanism may provide an inspiration for constructing ceria-based SAC with unique ODH activities.