Cobalt-Mediated Switchable Catalysis for the One-Pot Synthesis of Cyclic Polymers

Amino acids as bio-organocatalysts in ring-opening copolymerization for eco-friendly synthesis of biobased oligomers from vegetable oils

Herein, we present an innovative synthetic approach for producing a diverse set of biobased oligomers. This method begins with olive oil and employs a wide variety of commercially available amino acids (AAs) as bio-organocatalysts, in addition to tetrabutylammonium iodide (TBAI) as a cocatalyst, to synthesize various biobased oligomers. These biobased oligomers were strategically prepared starting from epoxidized olive oil (EOO) and a variety of cyclic anhydrides (phthalic, PA; maleic, MA; succinic, SA; and glutaric, GA). Among the amino acids tested as bio-organocatalysts, L-glutamic acid (L-Glu) showed the best performance for the synthesis of both poly(EOO-co-PA) and poly(EOO-co-MA), exhibiting 100% conversion at 80 °C in 2 hours, whereas the formation of poly(EOO-co-SA) and poly(EOO-co-GA) required more extreme reaction conditions (72 hours under toluene reflux conditions). Likewise, we have succeeded in obtaining the trans isomer exclusively for the MA based-oligomer within the same synthetic framework. The obtained oligomers were extensively characterized using techniques including NMR, FT-IR, GPC and TGA. A series of computational simulations based on density functional theory (DFT) and post-Hartree Fock (post-HF) methods were performed to corroborate our experimental findings and to obtain an understanding of the reaction mechanisms.

Functional and Degradable Polyester-co-polyethers from CO2, Butadiene, and Epoxides

Carbon dioxide (CO2), as a renewable and nontoxic C1 feedstock, has been recognized as an ideal comonomer to prepare sustainable materials. In this regard, substantial focus has been dedicated to the ring-opening copolymerization of CO2 and epoxides, which results in the creation of aliphatic polycarbonates in most cases. Here, we report an unprecedented strategy to synthesize functional and degradable polyester-co-polyethers from CO2, butadiene, and epoxides via a CO2/butadiene-derived δ-valerolactone intermediate (EVP). Utilizing a chromium salen complex as the catalyst, the copolymerization of EVP and epoxides was successfully achieved to produce CO2/butadiene/epoxide terpolymers. The obtained polyester-co-polyethers with varied 39-93 mol % EVP content (equal to 18-28 wt % CO2 incorporation) show high thermal stability, tunable glass-transition temperatures, on-demand functionality, and good chemical degradability. This method extends the potential to access functional CO2-based polymers.

Cyclic Polyesters with Closed-Loop Recyclability from A New Chemically Reversible Alternating Copolymerization

Polyesters with both cyclic topology and chemical recyclability are attractive. Here, the alternating copolymerization of cyclic anhydride and o-phthalaldehyde to synthesize a series of cyclic and recyclable polyesters are reported for the first time. Besides readily available monomers, the copolymerization is carried out at 25 °C, uses common Lewis/Brønsted acids as catalysts, and achieves high yields within 1 h. The resulting polyesters possess well-defined alternating sequences, high-purity cyclic topology, and tunable structures using distinct two monomer sets. Of interest, the copolymerization manifests obvious chemical reversibility as revealed by kinetic and thermodynamic studies, making the unprecedented polyesters easy to recycle to their distinct two monomers in a closed loop at high temperatures. This work furnishes a facile and efficient method to synthesize cyclic polyesters with closed-loop recyclability.

Efficient Synthesis of Cyclic Poly(ethylene glycol)s under High Concentration Conditions by the Assistance of Pseudopolyrotaxane with Cyclodextrin Derivatives

An efficient synthesis of cyclic polymers (CPs) is in high demand due to their unique properties. However, polymer cyclization generally occurs at low concentrations (0.1 g/L), and the synthesis of CPs at high concentrations remains a challenge. Herein an efficient cyclization of poly(ethylene glycol) (Mn = 2000 g/mol, 4000 g/mol) (PEG-2k, PEG-4k) in high concentration (80 g/L) is realized by the assistance of pseudopolyrotaxane (pPRx). Water-soluble pPRx with a U-like-shape inclusion motif is prepared by mixing the 2-hydroxypropyl-γ-cyclodextrin (HPγCD) and PEG with (E)-3,4,5-trimethoxycinnamate (TCA-PEG-2k, TCA-PEG-4k). Subsequent irradiation of the pPRx solution (10-80 g/L) by UV light gives cyclic polymers through the intramolecular [2 + 2] photocycloaddition of the cinnamoyl moieties. The photoreaction of TCA-PEG-2k in the pPRx system gives cyclic monomers (C-1mer) as major products with a yield of 66% at 80 g/L. Additionally, the cyclization of TCA-PEG-4k also gives C-1mer as major products with a yield of 45% at a concentration of 80 g/L.

One-pot synthesis of hyperbranched polymers via visible light regulated switchable catalysis

Switchable catalysis promises exceptional efficiency in synthesizing polymers with ever-increasing structural complexity. However, current achievements in such attempts are limited to constructing linear block copolymers. Here we report a visible light regulated switchable catalytic system capable of synthesizing hyperbranched polymers in a one-pot/two-stage procedure with commercial glycidyl acrylate (GA) as a heterofunctional monomer. Using (salen)Co^IIICl (1) as the catalyst, the ring-opening reaction under a carbon monoxide atmosphere occurs with high regioselectivity (>99% at the methylene position), providing an alkoxycarbonyl cobalt acrylate intermediate (2a) during the first stage. Upon exposure to light, the reaction enters the second stage, wherein 2a serves as a polymerizable initiator for organometallic-mediated radical self-condensing vinyl polymerization (OMR-SCVP). Given the organocobalt chain-end functionality of the resulting hyperbranched poly(glycidyl acrylate) (hb-PGA), a further chain extension process gives access to a core-shell copolymer with brush-on-hyperbranched arm architecture. Notably, the post-modification with 2,2,6,6-tetramethylpiperidine-1-oxyl (TEMPO) affords a metal-free hb-PGA that simultaneously improves the toughness and glass transition temperature of epoxy thermosets, while maintaining their storage modulus.

Recent Advances in Sequence-Controlled Ring-Opening Copolymerizations of Monomer Mixtures

Transforming renewable resources into functional and degradable polymers is driven by the ever-increasing demand to replace unsustainable polyolefins. However, the utility of many degradable homopolymers remains limited due to their inferior properties compared to commodity polyolefins. Therefore, the synthesis of sequence-defined copolymers from one-pot monomer mixtures is not only conceptually appealing in chemistry, but also economically attractive by maximizing materials usage and improving polymers' performances. Among many polymerization strategies, ring-opening (co)polymerization of cyclic monomers enables efficient access to degradable polymers with high control on molecular weights and molecular weight distributions. Herein, we highlight recent advances in achieving one-pot, sequence-controlled polymerizations of cyclic monomer mixtures using a single catalytic system that combines multiple catalytic cycles. The scopes of cyclic monomers, catalysts, and polymerization mechanisms are presented for this type of sequence-controlled ring-opening copolymerization.

Cyclic polymers: synthesis, characteristics, and emerging applications

Cyclic polymers with a ring-like topology and no chain ends are a unique class of macromolecules. In the past several decades, significant advances have been made to prepare these fascinating polymers, which allow for the exploration of their topological effects and potential applications in various fields. In this Review, we first describe representative synthetic strategies for making cyclic polymers and their derivative topological polymers with more complex structures. Second, the unique physical properties and self-assembly behavior of cyclic polymers are discussed by comparing them with their linear analogues. Special attention is paid to highlight how polymeric rings can assemble into hierarchical macromolecular architectures. Subsequently, representative applications of cyclic polymers in different fields such as drug and gene delivery and surface functionalization are presented. Last, we envision the following key challenges and opportunities for cyclic polymers that may attract future attention: large-scale synthesis, efficient purification, programmable folding and assembly, and expansion of applications.

Switchable Polymerization: A Practicable Strategy to Produce Biodegradable Block Copolymers with Diverse Properties

With the global demand for sustainable development, there has been an increasing interest in using natural biomass as raw resources to produce sustainable polymers as an alternative to petroleum-based polymers. Because monocomponent biodegradable polymers are often insufficient in performance, copolymers with well-engineered block structures are synthesized to reach wide tunability. Switchable polymerization is such a practical strategy to produce biodegradable block copolymers with diverse performance. This review focus on the performance of block copolymers bearing biodegradable polymer segments produced by diverse switchable polymerization. We highlight two main segments that are critical for biodegradable block copolymers, i. e., polyester and polycarbonate, summarize the multiple characters of materials from switchable polymerization such as antibacterial, shape memory, adhesives, etc. The state-of-the-art research on biodegradable block copolymers, as well as an outlook on the preparation and application of novel materials, are presented.

Synthesis of Linear to Cyclic Polylactide via a One-Pot Step-Wise Ring-Opening Polymerization and Back-Biting Reaction of Ring Closure Using Magnesium Complexes

The controllable synthesis of cyclic polylactide remains a challenging topic so far. In this work, a new strategy of one-pot step-wise ring-opening polymerization (ROP) followed by a back-biting reaction of ring closure was reported, in which one magnesium atrane-like complex {N,N-bis[3,5-di-cumyl-2-benzyloxy]-[2-(2-aminoethoxy)ethoxy]magnesium} was utilized to initiate the ROP of lactide using 4-dimethylaminopyridine as a co-catalyst; then, macrocyclic polylactides were liberated out via increasing temperature after complete depletion of the monomer in which a back-biting reaction was utilized as a ring-closure method. The living feature at the first ROP stage can be proved well by the controllable molecular weights ranging from 3.10 to 34.70 kDa and narrow molecular weight distributions of linear polylactides obtained after quenching the reaction. The final cyclic polylactides with molecular weights (vs polystyrene) ranging from 2.50 to 16.10 kDa can be achieved too after the back-biting reaction of ring closure. Although a shoulder peak at the gel permeation chromatography profile appears when the ratio of monomer:initiator is high up to 100:1 or 200:1, this system is suitable for the controllable syntheses of cyclic polylactides with desirable modest molecular weights.

Cyclic topology enhances the killing activity of polycations against planktonic and biofilm bacteria

Bacterial biofilms, as a fortress to protect bacteria, enhance resistance to antibiotics because of their limited penetration, which has become a major threat to current anti-infective therapy. Antimicrobial polycations have received wide attention to kill planktonic bacteria because of their unique antimicrobial mechanism without drug resistance but it is still hard to kill the bacteria in the deep of the biofilm. Unlike linear polymers, the cyclic topology has been demonstrated with enhanced penetration in tissues, which is attributed to the lack of end groups, constrained conformation and a smaller hydrodynamic volume, opening a new sight of polycations in the antibacterial application against biofilms. Here, polycations with different topologies including linear and cyclic polycations were synthesized and their killing activity against planktonic and biofilm bacteria was studied. The experimental results showed the enhanced antibacterial activity of cyclic polycations for planktonic bacteria, which is presumably attributed to their smaller hydrodynamic volume, higher local density of positive charge and more interactions between cation units and the bacterial membrane than their linear analogues. Besides, cyclic polycations exhibit enhanced killing effect for biofilm bacteria and inhibition effect for biofilms with 5-7 times and 2-3 times enhancements than the linear polycations, respectively. Furthermore, an Escherichia coli infection model on mice was established and the therapeutic effects of cyclic and linear polycations were evaluated. Compared with the linear polycations, the cyclic polycations exhibited enhanced antibacterial activity with an ∼4 times increase, promoting the healing of the infected wounds. This work provides a new perspective in the development of antimicrobial polycations, which are promising therapeutic agents to kill planktonic and biofilm bacteria without drug resistance.

A Porphyrinic Donor-Acceptor Conjugated Porous Polymer as Highly Efficient Photocatalyst for PET-RAFT Polymerization

Heterogeneous catalysts offer a highly desirable platform for exploring environmental-benign transformation systems, yet, they typically suffer from significant loss of catalytic efficiency compared with their homogeneous counterparts. Here, the facile synthesis of a porphyrinic conjugated porous polymer incorporated with imidazolium bromide moieties by taking advantage of the Debus-Radziszewski reaction is reported. Owing to the unique donor-acceptor structure, this heterogeneous and metal-free photocatalyst exhibits much improved catalytic activity compared with its small molecular analogs in photoinduced electron transfer reversible addition-fragmentation chain transfer (PET-RAFT) polymerization, producing polymers with narrow distribution (Đ = 1.06-1.18) and high degree of chain-end fidelity. Moreover, the heterogeneous catalyst can be easily separated at the end of polymerization by centrifugation and recycled for five independent PET-RAFT polymerizations without obvious decreases in catalytic efficiency.

Switchable Polymerization Organocatalysis: From Monomer Mixtures to Block Copolymers

One-pot production of sequence-controlled block copolymer from mixed monomers is a crucial but rarely reached goal. Using a switchable Lewis-pair organocatalyst, we have accomplished sequence-selective polymerization from a mixture of O-carboxyanhydride (OCA) and epoxide. Polymerization of the OCA monomer occurs first and exclusively because of its exceedingly high polymerizability. When OCA is fully consumed, alternating copolymerization of epoxide and CO₂ liberated in OCA polymerization is triggered from the termini of the first block. The two polymerizations thus occur in tandem, both in chemoselective fashion, so that a sequence-controlled block polymer with up to 99 % CO₂ conversion is furnished in this one-pot protocol. Calculations and experimental results demonstrate a chemoselective and cooperative mechanism, where the high polymerizability of the OCA monomers guarantees exquisite sequence selectivity and the cooperative decarboxylation partly arose from the stabilization effect by triethylborane, which facilitates the smooth transformation of the chain end from carbonate to alkoxide.

Gradient isoselective ring-opening polymerization of racemic cyclic diolide driven by chiral phosphoric acid catalysis

Commercially available binaphthol-derived chiral phosphoric acid organocatalysts were demonstrated to enable chemo- and stereoselective ROP of rac-cyclic diolide, yielding gradient isotactic multiblock poly(3-hydroxybutyrate) (P3HB).