Brightening up Circularly Polarized Luminescence of Monosubstituted Polyacetylene by Conformation Control: Mechanism, Switching, and Sensing

Recent Advances in Conductive Polymers-Based Electrochemical Sensors for Biomedical and Environmental Applications

Electrochemical sensors play a pivotal role in various fields, such as biomedicine and environmental detection, due to their exceptional sensitivity, selectivity, stability, rapid response time, user-friendly operation, and ease of miniaturization and integration. In addition to the research conducted in the application field, significant focus is placed on the selection and optimization of electrode interface materials for electrochemical sensors. The detection performance of these sensors can be significantly enhanced by modifying the interface of either inorganic metal electrodes or printed electrodes. Among numerous available modification materials, conductive polymers (CPs) possess not only excellent conductivity exhibited by inorganic conductors but also unique three-dimensional structural characteristics inherent to polymers. This distinctive combination allows CPs to increase active sites during the detection process while providing channels for rapid ion transmission and facilitating efficient electron transfer during reaction processes. This review article primarily highlights recent research progress concerning CPs as an ideal choice for modifying electrochemical sensors owing to their remarkable features that make them well-suited for biomedical and environmental applications.

Dual Enhancement of Phosphorescence and Circularly Polarized Luminescence through Entropically Driven Self-Assembly of a Platinum(II) Complex

Addressing the dual enhancement of circular polarization (glum) and luminescence quantum yield (QY) in circularly polarized luminescence (CPL) systems poses a significant challenge. In this study, we present an innovative strategy utilizing the entropically driven self-assembly of amphiphilic phosphorescent platinum(II) complexes (L-Pt) with tetraethylene glycol chains, resulting in unique temperature dependencies. The entropically driven self-assembly of L-Pt leads to a synergistic improvement in phosphorescence emission efficiency (QY was amplified from 15 % at 25 °C to 53 % at 60 °C) and chirality, both in the ground state and the excited state (glum value has been magnified from 0.04×10-2 to 0.06) with increasing temperature. Notably, we observed reversible modulation of phosphorescence and chirality observed over at least 10 cycles through successive heating and cooling, highlighting the intelligent control of luminescence and chiroptical properties by regulating intermolecular interactions among neighboring L-Pt molecules. Importantly, the QY and glum of the L-Pt assembly in solid state were measured as 69 % and 0.16 respectively, representing relatively high values compared to most self-assembled CPL systems. This study marks the pioneering demonstration of dual thermo-enhancement of phosphorescence and CPL and provides valuable insights into the thermal effects on high-temperature and switchable CPL materials.

"Matching Rule" for Generation, Modulation and Amplification of Circularly Polarized Luminescence

ConspectusCircularly polarized luminescence (CPL) generated by chiral luminescent systems has sparked enormous attention in multidisciplinary field as it brings infinite potential for applications, such as 3D optical displays, biological probes, and chiroptical sensors. Satisfying both the conditions of chirality and luminescence (including fluorescence or phosphorescence) is a prerequisite for constructing CPL materials. In this regard, whether in organic, inorganic, or hybrid systems, chiral and luminescent components generally involve effective coupling through covalent or noncovalent bonds. For covalent interactions, such as the copolymerization of chiral and luminescent monomers, although covalent bonds provide high stability for the system, they inevitably involve tedious preparation procedures that connect chirality and luminescence together. For noncovalent bonds, take supramolecular assembly as an example, chiral elements and achiral light-emitting units are chiral transferred through intermolecular interactions, and their advantages include the diversity of luminescent and chiral building blocks, the stimuli responsiveness brought by noncovalent bonds, as well as the potential amplification of CPL signals by coassembly. However, the stability of the assembly system may be poor, and the assembly chiroptical performance and morphology are difficult to predict. Gratifyingly, matching rule that do not rely on covalent together with noncovalent interactions allows for the effortless construction, modulation, as well as amplification of CPL systems.In this Account, we overview different strategies based on matching rule, including fluorescence-selective absorption, circularly polarized reflection, and circularly polarized fluorescence energy transfer (CPF-ET). Examples of these strategies are illustrated with a focus on helical polymers in light of their appealing structures and wide uses. For instance, for fluorescence-selective absorption, chiral helical polymers can convert racemic fluorescence light into a circularly polarized one with specific handedness by simply overlapping the helical polymer's circular dichroism (CD) spectra with the luminophore's emission spectra. For circularly polarized reflection, employing the selective reflection of certain handedness's circularly polarized light, the high helical twisting power (HTP) of the helical polymer in the cholesteric liquid crystals (N*-LCs) gives the system high glum. Additionally, for CPF-ET, only the emission spectrum of the donor and the absorption (or excitation) spectrum of the achiral acceptor are required to overlap, and no covalent or noncovalent interactions between the two are required. An outlook for the CPL materials related to matching rule which will avail the optimization and extension of this intriguing approach concludes the Account. We hope that the Account will offer insightful inspiration for the flourishing progress of chiroptical systems and present exciting opportunities.

Handedness-Inverted and Stimuli-Responsive Circularly Polarized Luminescent Nano/Micromaterials Through Pathway-Dependent Chiral Supramolecular Polymorphism

The precise manipulation of supramolecular polymorphs has been widely applied to control the morphologies and functions of self-assemblies, but is rarely utilized for the fabrication of circularly polarized luminescence (CPL) materials with tailored properties. Here, this work reports that an amphiphilic naphthalene-histidine compound (NIHis) readily self-assembled into distinct chiral nanostructures through pathway-dependent supramolecular polymorphism, which shows opposite and multistimuli responsive CPL signals. Specifically, NIHis display assembly-induced CPL from the polymorphic keto tautomer, which become predominant during enol-keto tautomerization shifting controlled by a bulk solvent effect. Interestingly, chiral polymorphs of nanofiber and microbelt with inverted CPL signals can be prepared from the same NIHis monomer in exactly the same solvent compositions and concentrations by only changing the temperature. The tunable CPL performance of the solid microbelts is realized under multi external physical or chemical stimuli including grinding, acid fuming, and heating. In particular, an emission color and CPL on-off switch based on the microbelt polymorph by reversible heating-cooling protocol is developed. This work brings a new approach for developing smart CPL materials via supramolecular polymorphism engineering.

Temperature-Induced Sign Inversion of Circularly Polarized Luminescence of Binaphthyl-Bridged Tetrathiapyrenophanes

D2-symmetric (R)-binaphthyl-bridged pyrenophanes containing thioether bonds were synthesized. The pyrenophanes exhibited the temperature-induced sign inversion of circularly polarized luminescence (CPL) while maintaining the emission wavelength and reversibility. The Δglum value reached 0.02, and the FL quenching by heat was negligible. The sign inversion of CPL originates from the inversion of intramolecular excimer chirality associated with excitation dynamics. The two pyrenes form a kinetically trapped left-handed twist excimer at low temperatures, while they form a thermodynamically favored right-handed twist excimer at high temperatures. The thioether linkers can impart flexibility suitable for the inversion of chirality of the excimers.

Polyacetylenes with (hetero)aryl-, styryl-, and amino-phenothiazinyl sidechains: synthesis and photophysics

A novel generation of 7-aryl phenothiazinyl substituted polyacetylenes is readily accessible via controlled rhodium-catalyzed polymerization of the corresponding 3-ethynyl 7-aryl phenothiazines. The monomers are synthesized by Suzuki coupling, Heck coupling, or Buchwald-Hartwig amination, and Bestmann-Ohira reaction. This allows for the introduction of electron donating and releasing substituents with different ligation patterns. The obtained polymers display narrow molecular weight distributions, with very few exceptions, and are soluble in many organic solvents. The photophysical properties of novel monosubstituted polyacetylenes and corresponding monomers were compared. While the monomers exhibit strong emission in solution with quantum yields of up to 0.84 only selected polymers are luminescent (Φf = 0.06) and display moderate Stokes shifts and positive emission solvatochromism.

Helitwistacenes-Combining Lateral and Longitudinal Helicity Results in Solvent-Induced Inversion of Circularly Polarized Light

Helicity is expressed differently in ortho- and para-fused acenes-helicenes and twistacenes, respectively. While the extent of helicity is constant in helicenes, it can be tuned in twistacenes, and the handedness of flexible twistacenes is often determined by more rigid helicenes. Here, we combine helicenes with rigid twistacenes consisting of a tunable degree of twisting, forming helitwistacenes. While the X-ray structures reveal that the connection does not affect the helicity of each moiety, their electronic circular dichroism (ECD) and circularly polarized luminescence (CPL) spectra are strongly affected by the helicity of the twistacene unit, resulting in solvent-induced sign inversion. ROESY NMR and TD-DFT calculations support this observation, which is explained by differences in the relative orientation of the helicene and twistacene moieties.

Synthesis and Photophysical Properties of Luminescent Phenothiazinyl Merocyanine Substituted Polyacetylenes

A new generation of soluble phenothiazinyl merocyanine substituted polyacetylenes can be readily synthesized by rhodium-catalyzed polymerization of the corresponding 3-ethynyl phenothiazines, accessible by Sonogashira coupling and Knoevenagel condensation. UV/Vis and fluorescence spectroscopy of 7-acceptor-substituted phenothiazinyl polyacetylenes reveal that these polyacetylenes with conjugatively ligated merocyanines are luminescent in solution with positive emission solvatochromism and, in some cases, with distinct solid-state luminescence.

Stimuli-responsive synthetic helical polymers

Synthetic dynamic helical polymers (supramolecular and covalent) and foldamers share the helix as a structural motif. Although the materials are different, these systems also share many structural properties, such as helix induction or conformational communication mechanisms. The introduction of stimuli responsive building blocks or monomer repeating units in these materials triggers conformational or structural changes, due to the presence/absence of the external stimulus, which are transmitted to the helix resulting in different effects, such as assymetry amplification, helix inversion or even changes in the helical scaffold (elongation, J/H helical aggregates). In this review, we show through selected examples how different stimuli (e.g., temperature, solvents, cations, anions, redox, chiral additives, pH or light) can alter the helical structures of dynamic helical polymers (covalent and supramolecular) and foldamers acting on the conformational composition or molecular structure of their components, which is also transmitted to the macromolecular helical structure.

Photoswitchable Enantioselective and Helix-Sense Controlled Living Polymerization

A pair of enantiomeric photoswitchable PdII catalysts, alkyne-PdII /LR-azo and alkyne-PdII /LS-azo , were prepared via the coordination of alkyne-PdII and azobenzene-modified phosphine ligands LR-azo and LS-azo . Owing to the cis-trans photoisomerization of the azobenzene moiety, alkyne-PdII /LR-azo and alkyne-PdII /LS-azo exhibited different polymerization activities, helix-sense selectivities, and enantioselectivities during the polymerization of isocyanide monomers under irradiation of different wavelength lights. Furthermore, the achiral isocyanide monomer A-1 could be polymerized efficiently using alkyne-PdII /LR-azo under dark condition in a living/controlled manner. Further, it generated single right-handed helical poly-A-1m (LR-azo ), confirmed by the circular dichroism spectra and atomic force microscopy images. However, the polymerization of A-1 almost could not be initiated under 420 nm light in identical conditions of dark condition. Moreover, the photoswitchable catalyst alkyne-PdII /LR-azo exhibited high enantioselectivity for the polymerization of the racemates of L-1 and D-1, respectively. D-1 was polymerized preferentially under dark condition with a D-1/L-1 rate ratio of 70, yielding single right-handed polyisocyanides. Additionally, reversible enantioselectivity was observed under 420 nm light using alkyne-PdII /LR-azo , and the calculated polymerization rate ratio of L-1/D-1 was 57 because of the isomerization of the azobenzene moiety of the catalyst. Furthermore, alkyne-PdII /LS-azo showed opposite enantioselectivity and helix-sense selectivity during the polymerization of the racemates of L-1 and D-1.

Synthesis and applications of helical polymers with dynamic and static memories of helicity

This review mainly highlights our studies on the synthesis of one-handed helical polymers with a static memory of helicity based on the noncovalent helicity induction with a helical-sense bias and subsequent memory of the helicity approach that we developed during the past decade. Apart from the previous approaches, an excess one-handed helical conformation, once induced by nonracemic molecules, is immediately retained ("memorized") after the complete removal of the nonracemic molecules, accompanied by a significant amplification of the asymmetry, providing novel switchable chiral materials for chromatographic enantioseparation and asymmetric catalysis as well as a highly sensitive colorimetric and fluorescence chiral sensor. A conceptually new one-handed helix formation in a racemic helical polymer composed of racemic repeating units through the deracemization of the pendants is described.

Control of One-Handed Helicity in Polyacetylenes: Impact of an Extremely Small Amount of Chiral Substituents

Controlling the one-handed helicity in synthetic polymers is crucial for developing helical polymer-based advanced chiral materials. We now report that an extremely small amount of chiral biphenylylacetylene (BPA) monomers (ca. 0.3-0.5 mol %) allows complete control of the one-handed helicity throughout the polymer chains mostly composed of achiral BPAs. Chiral substituents introduced at the 2-position of the biphenyl units of BPA positioned in the vicinity of the polymer backbones contribute to a significant amplification of the helical bias, as interpreted by theoretical modeling and simulation. The helical structures, such as the helical pitch and absolute helical handedness (right- or left-handed helix) of the one-handed helical copolymers, were unambiguously determined by high-resolution atomic force microscopy combined with X-ray diffraction. The exceptionally strong helix-biasing power of the chiral BPA provides a highly durable and practically useful chiral material for the separation of enantiomers in chromatography by copolymerization of an achiral functional BPA with a small amount of the chiral BPA (0.5 mol %) due to the robust helical scaffold of the one-handed helical copolymer.

Controlled synthesis of cyclic helical polyisocyanides and bottlebrush polymers using a cyclic alkyne-Pd(II) catalyst

Cyclic polymers have very unique structure and properties, and thus have drawn intense research attention. However, controlled synthesis of cyclic polymers with predictable molar mass and narrow distribution is still a challenging task. In this study, we developed a novel cyclic catalyst that initiates the ring-expansion polymerisation of isocyanides, producing a series of cyclic helical polymers with predictable molecular weight and low dispersity. Interestingly, the ring-expansion polymerization of the isocyanide macromonomers gives well-defined cyclic bottlebrush polymers. The cyclic topology was demonstrated using transmission electron microscopy.

Current State of Computational Modeling of Nanohelicenes

This review considers the works that focus on various aspects of the theoretical description of nanohelicenes (other equivalent names are graphene spirals, graphene helicoid, helical graphene nanoribbon, or helical graphene)-a promising class of one-dimensional nanostructures. The intrinsic helical topology and continuous π-system lead to the manifestation of unique optical, electronic, and magnetic properties that are also highly dependent on axial and torsion strains. In this paper, it was shown that the properties of nanohelicenes are mainly associated with the peripheral modification of the nanohelicene ribbon. We have proposed a nomenclature that enables the classification of all nanohelicenes as modifications of some prototype classes.

Liquid Crystals Doped with Chiral Fluorescent Polymer: Multi-Color Circularly Polarized Fluorescence and Room-Temperature Phosphorescence with High Dissymmetry Factor and Anti-Counterfeiting Application

Chiral nematic liquid crystals (N*-LCs) can tremendously amplify circularly polarized luminescence (CPL) signals. Doped emissive N*-LCs have been substantially explored. However, their CPL performances still need to be improved, mainly due to the unsatisfying helical twisting power (HTP) of commonly used chiral fluorescent dopants. Chiral fluorescent helical polymers (CFHPs) have outstanding optical activity and CPL performance. The present contribution reports the first success in constructing emissive N*-LCs by doping CFHP into nematic liquid crystals (5CB, N-LCs). The helical assembly structures of N*-LCs effectively amplify the CPL signals of the CFHP. Owing to the high HTP of CFHP, the selective reflection band of N*-LC can be adjusted to fully cover its emission band. A nearly pure CPL with a dissymmetry factor (glum ) up to -1.87 is realized at 9 wt% doping concentration. Taking advantage of the selective reflection mechanism, multi-color CPL-active N*-LCs with high glum are fabricated via further adding achiral fluorophores. Also noticeably, circularly polarized room-temperature phosphorescence with glum up to -1.57 is achieved. Anti-counterfeiting application is demonstrated by exploiting multi-mode optical characteristics of the created N*-LCs. The established strategy for constructing emissive N*-LCs provides a platform for future exploring of CPL-active N*-LCs.

Stepwise Solution-Interfacial Nanoarchitectonics for Assembled Film with Full-Color and White-Light Circularly Polarized Luminescence

The fabrication of chiral thin films with tunable circularly polarized luminescence (CPL) colors is important in developing chiroptical materials but remains challenging due to the lack of assembly-initiated chiral film formation methodology. Here, by adopting a combined solution aggregation and interfacial assembly strategy, we report the fabrication of chiral film materials with full-color and white-light CPL. A biquinoline glutamic acid ester (abbreviated as BQGE) shows a typical aggregation-induced emission property with blue CPL after solution aggregation. Subsequent interfacial assembly of these solution aggregates on a solid substrate leads to the formation of a CPL active film consisting of nanobelt structures. Since the BQGE molecule has a coordination site, the CPL emission of an individual BQGE film can be extended from blue to green emission upon coordination with a zinc ion, accompanied by morphology transition from nanobelts to nanofibers. Further extension to red-color CPL is successfully achieved by coassembly with an achiral acceptor dye. Interestingly, the proper combination of coordination ratio and acceptor loading ratio provides bright white-light CPL emission from the BQGE/Zn²⁺/PDA triad composite film. This work provides a new approach to fabricating chiroptical film materials with controlled microscopic morphology and tunable CPL properties.

Intense Circularly Polarized Fluorescence and Room-Temperature Phosphorescence in Carbon Dots/Chiral Helical Polymer Composite Films

Chiral carbon dots (C-dots) with a circularly polarized fluorescence (CPF) property have attracted tremendous attention due to their significant applications in chiral optoelectronics and theranostics. However, constructing circularly polarized room-temperature phosphorescent (CPRTP) C-dots remains a great challenge. Herein, a strategy is established to achieve efficient CPF and CPRTP emissions in C-dots/chiral helical polymer bilayer composite film. Taking advantage of the chiral filter effect of chiral helical polymer, intense CPF and CPRTP emissions with large dissymmetric factors up to 1.4 × 10^-1 and 1.2 × 10^-2 are respectively obtained, even though there is only a simple interface contact between the C-dots layer and the chiral helical polymer layer. More importantly, white-color CPF emission and multiple information display and encryption are further realized based on the prepared chiral luminescent composite films.

Visible Helicity Induction and Memory in Polyallene toward Circularly Polarized Luminescence, Helicity Discrimination, and Enantiomer Separation

Inspired by biological helices (e.g., DNA), artificial helical polymers have attracted intense attention. However, precise synthesis of one-handed helices from achiral materials remains a formidable challenge. Herein, a series of achiral poly(biphenyl allene)s with controlled molar mass and low dispersity were prepared and induced into one-handed helices using chiral amines and alcohols. The induced one-handed helix was simultaneously memorized, even after the chiral inducer was removed. The switchable induction processes were visible to naked eye; the achiral polymers exhibited blue emission (irradiated at 365 nm), whereas the induced one-handed helices exhibited cyan emission with clear circularly polarized luminescence. The induced helices formed stable gels in various solvents with helicity discrimination ability: the same-handed helix gels were self-healing, whereas the gels of opposite-handed helicity were self-sorted. Moreover, the induced helices could separate enantiomers via enantioselective crystallization with high efficiency and switchable enantioselectivity.

Brightening up Full-Color and White Circularly Polarized Luminescence through Chiral Induction and Circularly Polarized Light Excitation

Preparation of chiral materials from achiral helical polymers has aroused great interest among researchers. In this work, chiral small molecules were utilized to accomplish chiral induction toward racemic helical polyacetylene via intermolecular π-π stacking by which chiral films with strong optical activity were fabricated. Furthermore, introducing fluorescent components generated full-color and white circularly polarized luminescence (CPL). A CPL generation mechanism is proposed accordingly, namely circularly polarized light excitation (CP-Ex). CPL emission and amplification of the luminescence dissymmetry factor were achieved under the synergetic effect of CP-Ex and chirality transfer. The CP-Ex mechanism was further verified by the double-layered film consisting of a chiral layer and a fluorescent layer. More noticeably, for double-layered films, the sense of CPL signals can be switched by changing the direction of excitation light. This work opens up new strategies for exploring tunable multiple- and white-color CPL materials.

Dynamic helical cationic polyacetylenes for fast and highly efficient killing of bacteria

The antimicrobial activity of native antimicrobial peptides (AMPs) is often attributed to their helical structure, but the effectiveness of synthetic mimics with dynamic helical conformations, such as antimicrobial cationic polymers (ACPs), has not been well studied. Herein we demonstrate the antimicrobial activity of pyrrolidinium-pendant polyacetylenes (PAs) with dynamic helical conformations. The PAs exhibit fast and efficient antimicrobial activity against a wide range of pathogens, with low toxicity to mammalian cells and minimal risk of antibiotic resistance. In addition, the full-thickness wound infection model in mice has demonstrated the favorable biocompatibility and effective in vivo antibacterial capabilities of these PAs. Our data suggest that the dynamic helical structure of these PAs allows them to adapt and form pores in the bacterial membrane upon interaction, leading to their potent antimicrobial activity. This work investigated the antibacterial mechanism of dynamic helical ACPs, which provides valuable guidance for the rational design of high-performance antimicrobial agents. STATEMENT OF SIGNIFICANCE: Our study represents a significant contribution to the literature on antimicrobial cationic polymers (ACPs) as alternatives to antibiotics. Through a systematic investigation of the role of dynamic helical conformation in polyacetylenes (PAs) and the use of PAs with adaptive structure for the first time, we have provided valuable insights into the bacterial membrane action and killing mechanisms of these polymers. The results of our study, including fast killing rates and minimum inhibitory concentrations as low as 4-16 µg/mL against a broad range of pathogens and strong in vivo antibacterial activity, demonstrate the potential of these ACPs as high-performance antimicrobials. Our findings may guide the design of future ACPs with enhanced antimicrobial activity.

Ultra-fast One-Handed Helix Induction and Its Static Helicity Memory in a Poly(biphenylylacetylene) with a Catalytic Amount of Chiral Ammonium Salts

We report an ultra-fast helix induction and subsequent static helicity memory in poly(biphenylylacetylene) (PBPA-A) assisted by a catalytic amount of nonracemic ammonium salts comprised of non-coordinating tetrakis[3,5-bis(trifluoromethyl)phenyl]borate (BArF^- ) as a counter anion. The remarkable acceleration of the helix-induction rate in PBPA-A accompanied by the significant amplification of the asymmetry relies on the two methoxymethoxy groups of the biphenyl pendants, which can gain access to enfold the chiral ammoniums in a crown-ether manner in specific aromatic solvents, leading to ultra-fast helicity induction, which is completed within 30 s. In aromatic solvents, helicity memory is lost rapidly, but is quite stable in long-chain hydrocarbons. The best use of specific solvents for helicity induction and static helicity memory, respectively, provides a highly sensitive chirality sensing system toward a small amount of chiral amines and amino acids when complexed with BArF^- .

Chiroptical Elastomer Film Constructed by Chiral Helical Substituted Polyacetylene and Polydimethylsiloxane: Multiple Stimuli Responsivity and Chiral Amplification

Chiral and circularly polarized luminescence (CPL) materials with multiple stimuli responses have become a focus of attention. Meanwhile, elastomers have found substantial applications in a wide variety of fields. However, how to design and construct chiral elastomers, in particular CPL-active elastomers, still remains an academic challenge. In the present study, chiral helical substituted polyacetylene is chemically bonded with polydimethylsiloxane (PDMS) by hydrosilylation to form a chiroptically active elastomer. A CPL-active film was further fabricated by adding achiral fluorophores. Compared with the corresponding chiral helical polymer, the chiral films show much enhanced thermal stability in terms of chiroptical properties. The films also demonstrate reversible tunability in optical activity and CPL property when being subjected to a stretching-restoring process and exposed to a solvent like toluene. Further, noticeable chiral amplification is observed when the chiral PDMS film is superimposed with a pure PDMS film. This interesting finding is proposed to be due to the photoreflectivity of PDMS. This study provides an alternative strategy to exploit novel CPL-active elastomer materials with multiple stimuli responsivity and tunability, which may open up new opportunities for developing novel chiroptical devices.

2D Hexagonal Assemblies of Amphiphilic Double-Helical Poly(phenylacetylene) Homopolymers with Enhanced Circularly Polarized Luminescence and Chiral Self-Sorting

Two-dimensional (2D) chiral materials have been attracting immense attentions owing to their unique properties. Herein, we successfully developed a unique assembly strategy of amphiphilic homopolymers to construct stable free-standing 2D chiral nanosheets in solution. The amphiphilic poly(phenylacetylene) (PPA) homopolymers bearing the hydrophobic and hydrophilic dendritic side chains adopt a DNA-like double-helical conformation. The regular hexagonal nanosheets were formed in THF/EtOH through nucleation and epitaxial growth. The sizes of the nanosheets can be modulated from nanometers to submillimeters upon varying the ratio of binary solvents, while the thickness is linearly correlated with the molecular weights. The 2D architecture can significantly enhance the CPL of polymers with a high dissymmetry factor ≈0.1. Driven by a discrimination of helical conformation, the PPAs can self-sort into homochiral 2D nanosheets, as directly visualized by using fluorescent microscopy.

Full Control of the Chiral Overpass Effect in Helical Polymers: P/M Screw Sense Induction by Remote Chiral Centers After Bypassing the First Chiral Residue

In helical polymers, helical sense induction is usually commanded by teleinduction mechanism, where the largest substituent of the chiral residue directly attached to the main chain is the one that commands the helical sense. In this work, different helical structures with different helical senses are induced in a helical polymer [poly-(phenylacetylene)] when the conformational composition of two different dihedral angles of a pendant group with more than two chiral residues is tamed. Thus, while the dihedral angle at chiral residue 1 [(R)- or (S)-alanine], attached to the backbone, produces an extended or bent conformation in the pendant resulting in two scaffolds with different stretching degree, the second dihedral angle at chiral residue 2 [(R)- or (S)-methoxyphenylacetamide] places the substituents of this chiral center in a different spatial orientation, originating opposite helical senses at the polymer that are induced through a total control of the "chiral overpass effect".

In Situ Regulation of Microphase Separation-Recognized Circularly Polarized Luminescence via Photoexcitation-Induced Molecular Aggregation

Circularly polarized luminescence (CPL) has attracted great interest owing to its extensive optical information and chiral structural dependence. However, rationally regulating solid-phase CPL signals remains difficult because of the close packing of molecules in solid-state materials and the lack of structural visualization. In this work, we proposed a microphase-separation-recognized CPL regulation strategy via coassembly of a hexathiobenzene-based luminophore and chiral block copolymer (cBCP) with in situ photocontrollability. As a consequence to the continuous increase in the luminophore-to-cBCP ratio, the CPL signal of the supramolecular system exhibited an increasing trend until a critical point. Then, further increasing the ratio stretched the helical pitch of cBCP, which led to CPL reduction. With the photoexcitation-induced molecular aggregation of the luminophore, which was implemented using in situ photoirradiation, the helical pitch was retracted along with the restoration of the CPL signal. These processes were fully recognized and monitored by the microphase-separated nanomorphological change of the coassembled system, which indicated that such a structural contrast could be an effective method for rationally regulating the supramolecular chiropticity of solid-state materials.

Signal Inversion and Amplification of Circularly Polarized Luminescence in a Poly(phenylacetylene)-Based Composite System Assisted by Achiral PMMA

Multichannel regulable circularly polarized luminescence (CPL) is fascinating because of its fundamental and application interest. There are few reports on helical sense (P-/M-helix) modulation and chiral signal amplification of polyacetylenes with the assistance of achiral polymers and further applications in precisely and conveniently regulating CPL handedness and magnitude. Herein, a helical poly(phenylacetylene)-based CPL-active system was constructed, in which CPL inversion occurred by adding achiral PMMA into a helical poly(phenylacetylene)-CHCl₃ solution. Significantly, there is almost 10 times magnification of luminescence dissymmetry factor values (|g_lum|) during this process. The above phenomena could be ascribed to the PMMA-assisted polyene backbone elongation and the formation of a more ordered helical structure for the poly(phenylacetylene)s. More interestingly, the CPL signal can be facilely inverted and switched by simply changing the thickness of the PPhAD/PMMA layer. The temperature-driven dynamic CPL handedness inversion and magnitude modulation can also be achieved. Based on the multiple regulations for CPL, logic operations were developed, and the practical application is further facilitated by designing various CPL patterns. This study establishes effective and convenient strategies to switch the handedness, magnitude, and wavelength of CPL, which may generate a breakthrough in the manufacturing of CPL-active smart materials and devices with promising application potential.

Facile Fabrication of Hierarchically Porous Boronic Acid Group-Functionalized Monoliths With Optical Activity for Recognizing Glucose With Different Conformation

At present, various materials based on helical polymers are nanoparticle or microsphere, which is not ease of use in practical application. Accordingly, facile preparation hierarchically porous monolith based on helical polymer needs to be developed. Herein, hierarchically porous boronic acid group-functionalized monoliths that exhibited optical activity were fabricated with a facile method based on crosslinking and polymerization-induced phase separation (CPIPS). Chiral substituted acetylene and achiral substituted acetylene with a boronic acid group were used as monomers. By regulating the composition of the pre-polymerization solution, the permeability and macropore size of the porous structure could be controlled. The hierarchically porous structure and large surface area were confirmed by scanning electron microscopy and nitrogen gas adsorption/desorption isotherms. In particular, the boronic acid functional group that can interact with a cis-diol group was successfully introduced on the skeleton surface of the monoliths. Further, the main chain of the copolymer that constituted the monoliths exhibited a high cis content and tacticity, and the monoliths showed good optical activity. Thus, the present study established a facile method to synthesize hierarchically porous boronic acid group-functionalized monoliths with optical activity via CPIPS, and the monoliths showed potential in recognition, separation, and adsorption of compound with chirality and cis-diol groups.

Self-Reporting Activated Ester-Amine Reaction for Enantioselective Multi-Channel Visual Detection of Chiral Amines

Chiral recognition is of importance not only in living systems but also in estimating the optical purity of enantiomeric drugs and fabricating advanced materials. Herein we report a novel self-reporting activated ester-amine reaction that can provide multi-channel visual detection of organic amines. It relies on the reaction extent dependent cis-transoid to cis-cisoid helical transition of the polyphenylacetylene backbone and the thus triggered fluorescence. Owing to the high selectivity, this visual process can recognize structurally diverse achiral amines and quantitatively check the impurity content. It also shows an outstanding enantioselectivity towards various chiral amines and can be applied to determine enantiomeric composition. The multiple responses in absorption, circular dichroism, photoluminescence, and circularly polarized luminescence make the helical transition of the polymer backbone a potential detection mode for high-throughput screening of chiral chemicals.

Integration of Different Graphene Nanostructures with PDMS to Form Wearable Sensors

This paper presents a substantial review of the fabrication and implementation of graphene-PDMS-based composites for wearable sensing applications. Graphene is a pivotal nanomaterial which is increasingly being used to develop multifunctional sensors due to their enhanced electrical, mechanical, and thermal characteristics. It has been able to generate devices with excellent performances in terms of sensitivity and longevity. Among the polymers, polydimethylsiloxane (PDMS) has been one of the most common ones that has been used in biomedical applications. Certain attributes, such as biocompatibility and the hydrophobic nature of PDMS, have led the researchers to conjugate it in graphene sensors as substrates or a polymer matrix. The use of these graphene/PDMS-based sensors for wearable sensing applications has been highlighted here. Different kinds of electrochemical and strain-sensing applications have been carried out to detect the physiological signals and parameters of the human body. These prototypes have been classified based on the physical nature of graphene used to formulate the sensors. Finally, the current challenges and future perspectives of these graphene/PDMS-based wearable sensors are explained in the final part of the paper.