In Situ Modulation of A-Site Vacancies in LaMnO3.15 Perovskite for Surface Lattice Oxygen Activation and Boosted Redox Reactions

Insights into in situ surface reconstruction in cobalt perovskite oxides for enhanced catalytic activity

An depth understanding of the fundamental interactions between surface termination and catalytic activity is crucial to prompt the properties of functional perovskite materials. The elastic energy due to size mismatch and electrostatic attraction of the charged Sr dopant by positively charged oxygen vacancies induced inert A-site surface enrichment rearrangement for perovskites. Lower temperatures could reduce A-site enrichment, but it is difficult to form perovskite crystals. La0.8Sr0.2CoO3-δ (LSCO) as a model perovskite oxide was modified with additive urea to reduce the crystallization temperature, and suppress Sr segregation. The LSCO catalysts with 600 °C annealing temperature (LSCO-600) exhibited a 19.4-fold reaction reactivity of toluene oxidation than that with 800 °C annealing temperature (LSCO-800). Combined surface-sensitive and depth-resolved techniques for surface and sub-surface analysis, surface Sr enrichment was effectively suppressed due to decreased oxygen vacancy concentration and smaller electrostatic driving force. DFT calculations and in-situ DRIFTs spectra well revealed that tuning the surface composition/termination affected the intrinsic reactivity. The catalyst surface with lower Sr enrichment could easily adsorb toluene, cleave, and decompose benzene rings, thus contributing to toluene degradation to CO2. This work demonstrates a green and efficient way to control surface composition and termination at the atomic scale for higher catalytic activity.

Revealing the Synergistic Effect of Cation and Anion Vacancies on Enhanced Fenton-Like Reaction: The Electron Density Modulation of O 2p-Co 3d Bands

Defect engineering is considered as a flexible and effective mean to improve the performance of Fenton-like reactions. Herein, a simple method is employed to synthesize Co3O4 catalysts with Co-O vacancy pairs (VP) for peroxymonosulfate (PMS) activation. Multi-scaled characterization, experimental, and simulation results jointly revealed that the cation vacancies-VCo contributed to enhanced conductivity and anion vacancies-VO provided a new active center for the 1O2 generation. Co3O4-VP can optimize the O 2p and Co 3d bands with the strong assistance of synergistic double vacancies to reduce the reaction energy barrier of the "PMS → Co(IV) = O → 1O2" pathway, ultimately triggering the stable transition of mechanism. Co3O4-VP catalysts with radical-nonradical collaborative mechanism achieve the synchronous improvement of activity and stability, and have good environmental robustness to favor water decontamination applications. This result highlights the possibility of utilizing anion and cation vacancy engineering strategies to rational design Co3O4-based materials widely used in catalytic reactions.

Ruthenium single-atom doping-driven modulation of Co3O4 spinel tetrahedral site 3d-orbital occupancy in lithium-oxygen batteries

Metal single-atom catalysts have attracted widespread attention in the field of lithium-oxygen batteries due to their unique active sites, high catalytic selectivity, and near total atomic utilization efficiency. Isolated metal atoms not only serve as the active sites themselves, but also function as modulators, reversely regulating the surface electronic structure of the support to enhance its inherent electrocatalytic activities. Despite the potential of isolated metal atom-driven active sites, understanding the structure-activity relationship remains a challenge. In this study, we present a ruthenium single-atom doping-driven cost-effective and durable tricobalt tetroxide electrocatalyst with excellent oxygen electrode electrocatalytic activity. The lithium-oxygen battery with this catalyst as the oxygen electrode demonstrates high performance, achieving a capacity of up to 25 000 mA h g-1 and maintaining good stability over 400 cycles at a current density of 100 mA g-1. This improvement is attributed to the exquisite control of the morphology and structure of the discharge product, lithium peroxide. The aresults of physical characterization and theoretical calculations reveal that isolated ruthenium atoms bond with the tetrahedral cobalt site, resulting in spin polarization enhancement and rearrangement of d orbital energy levels in cobalt. This rearrangement reduces the dz2 orbital occupancy and promotes their transfer to the octahedral cobalt site, thereby enhancing its adsorption capacity for the oxygen-containing intermediates, and ultimately increasing the electrocatalytic activity of the oxygen evolution reaction. This work presents an innovative strategy to regulate the catalytic activity of metal oxides by introducing another metal single atom.

Internal Electric Field Facilitates Facet-Dependent Photocatalytic Cl- Utilization on BiOCl in High-Salinity Wastewater for Ammonium Removal

High Cl- concentration in saline wastewater (e.g., landfill leachate) limits wastewater purification. Catalytic Cl- conversion into reactive chlorine species (RCS) arises as a sustainable strategy, making the salinity profitable for efficient wastewater treatment. Herein, aiming to reveal the structure-property relationship in Cl- utilization, bismuth oxychloride (BiOCl) photocatalysts with coexposed {001} and {110} facets are synthesized. With an increasing {001} ratio, the RCS production efficiency increases from 75.64 to 96.89 μg L-1 min-1. Mechanism investigation demonstrates the fast release of lattice Cl- as an RCS and the compensation of ambient Cl-. Correlation analysis between the internal electric field (IEF, parallel to [001]) and normalized efficiency on {110} (kRCS/S{110}, perpendicular to [001]) displays a coefficient of 0.86, validating that the promoted carrier dynamics eventually affects Cl- conversion on the open layered structure. The BiOCl photocatalyst is well behaved in ammonium (NH4+-N) degradation ranging from 20 to 800 mg N L-1 with different chlorinity (3-12 g L-1 NaCl). The sustainable Cl- conversion into RCS also realizes 85.4% of NH4+-N removal in the treatment of realistic landfill leachate (662 mg of N L-1 NH4+-N). The structure-property relationship provides insights into the design of efficient catalysts for environment remediation using ambient Cl-.

Motivating Inert Strontium Manganate with Iridium Dopants as Efficient Electrocatalysts for Oxygen Evolution in Acidic Electrolyte

The search for high-performance and low-cost electrocatalysts in acid conditions still remains a challenging target. Herein, iridium (Ir) doped strontium manganate (named as Irx -SMO) is proposed as an efficient and durable low-iridium electrocatalyst for water oxidation in acidic media. The Ir0.1 -SMO with 75% less iridium in comparison to that of iridium dioxide (IrO2 ) exhibits excellent performance for oxygen evolution reaction (OER), which is even better than most of the iridium-based oxide electrocatalysts. The theoretical outcomes confirm the activation of the inert manganese sites in strontium manganate by the incorporation of iridium dopants. This work reveals the boosted effect of the iridium dopants on the OER activity of strontium manganate, providing a strategy to tune the activity of manganese-based perovskites in electrocatalysis.

Engineering dual-crystal configurations in perovskite oxides boosts electrocatalysis of lithium-oxygen batteries

Sculpting crystal configurations can vastly affect the charge and orbital states of electrocatalysts, fundamentally determining the catalytic activity of lithium-oxygen (Li-O2) batteries. However, the crucial role of crystal configurations in determining the electronic states has usually been neglected and needs to be further examined. Herein, we introduce orthorhombic and trigonal system into 0.5La0.6Sr0.4MnO3-0.5LaMn0.6Co0.4O3 (LSMCO) by selectively incorporating Sr and Co cations into the LaMnO3 framework during the sol-gel process, which is used to explore the relationship among crystal structure, electronic states and catalytic performance. Based on both experimental and theoretical calculations, the dual-crystal configurations induce strong lattice distortion, which promotes MnO6 octahedra vibration and shortened MnO bonds. Furthermore, the suppressed Jahn-Teller distortion weakens the orbital arrangement and accelerates the charge delocalization, leading to the conversion of Mn3+ to Mn4+ and optimized electronic states. Ultimately, this resulted in optimized Mn 3d and O 2p orbital hybridization and activated lattice oxygen function, leading to a significant improvement in electrocatalytic activity. The LSMCO catalyzed Li-O2 battery achieves enhanced discharge capacity of 14498.7 mAh/g and cycling stability of 258 cycles. This work highlights the significance of inner structure and presents a feasible strategy for engineering crystal configurations to boost electrocatalysis of Li-O2 batteries.

Constructing Active Cu2+-O-Fe3+ Sites at the CuO-Fe3O4 Interface to Promote Activation of Surface Lattice Oxygen

Activating surface lattice oxygen (Olatt) through the modulation of metal-oxygen bond strength has proven to be an effective route for facilitating the catalytic degradation of volatile organic compounds (VOCs). Although this strategy has been implemented via the construction of the TM1-O-TM2 (TM represents a transition metal) structure in various reactions, the underlying principle requires exploration when using different TMs. Herein, the Cu2+-O-Fe3+ structure was created by developing CuO-Fe3O4 composites with enhanced interfacial effect, which exhibited superior catalytic activity to their counterparts, with T90 (the temperature of toluene conversion reaching 90%) decreasing by approximately 50 °C. Structural analyses and theoretical calculations demonstrated that the active Cu2+-O-Fe3+ sites at the CuO-Fe3O4 interface improved low-temperature reducibility and oxygen species activity. Particularly, X-ray absorption fine structure spectroscopy revealed the contraction and expansion of Cu-O and Fe-O bonds, respectively, which were responsible for the activation of the surface Olatt. A mechanistic study revealed that toluene can be oxidized by rapid dehydrogenation of methyl assisted by the highly active surface Olatt and subsequently undergo ring-opening and deep mineralization into CO2 following the Mars-van Krevelen mechanism. This study provided a novel strategy to explore interface-enhanced TM catalysts for efficient surface Olatt activation and VOCs abatement.

Cation Substitution Strategy for Developing Perovskite Oxide with Rich Oxygen Vacancy-Mediated Charge Redistribution Enables Highly Efficient Nitrate Electroreduction to Ammonia

The electrocatalytic nitrate (NO3-) reduction reaction (eNITRR) is a promising method for ammonia synthesis. However, its efficacy is currently limited due to poor selectivity, largely caused by the inherent complexity of the multiple-electron processes involved. To address these issues, oxygen-vacancy-rich LaFe0.9M0.1O3-δ (M = Co, Ni, and Cu) perovskite submicrofibers have been designed from the starting material LaFeO3-δ (LF) by a B-site substitution strategy and used as the eNITRR electrocatalyst. Consequently, the LaFe0.9Cu0.1O3-δ (LF0.9Cu0.1) submicrofibers with a stronger Fe-O hybridization, more oxygen vacancies, and more positive surface potential exhibit a higher ammonia yield rate of 349 ± 15 μg h-1 mg-1cat. and a Faradaic efficiency of 48 ± 2% than LF submicrofibers. The COMSOL Multiphysics simulations demonstrate that the more positive surface of LF0.9Cu0.1 submicrofibers can induce NO3- enrichment and suppress the competing hydrogen evolution reaction. By combining a variety of in situ characterizations and density functional theory calculations, the eNITRR mechanism is revealed, where the first proton-electron coupling step (*NO3 + H+ + e- → *HNO3) is the rate-determining step with a reduced energy barrier of 1.83 eV. This work highlights the positive effect of cation substitution in promoting eNITRR properties of perovskites and provides new insights into the studies of perovskite-type electrocatalytic ammonia synthesis catalysts.

Tailoring Oxygen Reduction Reaction Kinetics on Perovskite Oxides via Oxygen Vacancies for Low-Temperature and Knittable Zinc-Air Batteries

High kinetics oxygen reduction reaction (ORR) electrocatalysts under low temperature are critical and highly desired for temperature-tolerant energy conversion and storage devices, but remain insufficiently investigated. Herein, oxygen vacancy-rich porous perovskite oxide (CaMnO3 ) nanofibers coated with reduced graphene oxide coating (V-CMO/rGO) are developed as the air electrode catalyst for low-temperature and knittable Zn-air batteries. V-CMO/rGO exhibits top-level ORR activity among perovskite oxides and shows impressive kinetics under low temperature. Experimental and theoretical calculation results reveal that the synergistic effect between metal atoms and oxygen vacancies, as well as the accelerated kinetics and enhanced electric conductivity and mass transfer over the rGO coated nanofiber 3D network contribute to the enhanced catalytic activity. The desorption of ORR intermediate is promoted by the regulated electron filling. The V-CMO/rGO drives knittable and flexible Zn-air batteries under a low temperature of -40 °C with high peak power density of 56 mW cm-2 and long cycle life of over 80 h. This study provides insight of kinetically active catalyst and facilitates the ZABs application in harsh environment.

Boosting CO2 Electroreduction to C2H4 via Unconventional Hybridization: High-Order Ce4+ 4f and O 2p Interaction in Ce-Cu2O for Stabilizing Cu. ACS NANO 2023. [PMID: 37410800 DOI: 10.1021/acsnano.3c03952]

Efficient conversion of carbon dioxide (CO₂) into value-added materials and feedstocks, powered by renewable electricity, presents a promising strategy to reduce greenhouse gas emissions and close the anthropogenic carbon loop. Recently, there has been intense interest in Cu₂O-based catalysts for the CO₂ reduction reaction (CO₂RR), owing to their capabilities in enhancing C-C coupling. However, the electrochemical instability of Cu⁺ in Cu₂O leads to its inevitable reduction to Cu⁰, resulting in poor selectivity for C₂₊ products. Herein, we propose an unconventional and feasible strategy for stabilizing Cu⁺ through the construction of a Ce⁴⁺ 4f-O 2p-Cu⁺ 3d network structure in Ce-Cu₂O. Experimental results and theoretical calculations confirm that the unconventional orbital hybridization near E_f based on the high-order Ce⁴⁺ 4f and 2p can more effectively inhibit the leaching of lattice oxygen, thereby stabilizing Cu⁺ in Ce-Cu₂O, compared with traditional d-p hybridization. Compared to pure Cu₂O, the Ce-Cu₂O catalyst increased the ratio of C₂H₄/CO by 1.69-fold during the CO₂RR at -1.3 V. Furthermore, in situ and ex situ spectroscopic techniques were utilized to track the oxidation valency of copper under CO₂RR conditions with time resolution, identifying the well-maintained Cu⁺ species in the Ce-Cu₂O catalyst. This work not only presents an avenue to CO₂RR catalyst design involving the high-order 4f and 2p orbital hybridization but also provides deep insights into the metal-oxidation-state-dependent selectivity of catalysts.

Dynamic active-site induced by host-guest interactions boost the Fenton-like reaction for organic wastewater treatment

In heterogeneous catalysis, uncovering the dynamic evolution of active sites in the working conditions is crucial to realizing increased activity and enhanced stability of catalyst in Fenton-like activation. Herein, we capture the dynamic changes in the unit cell of Co/La-SrTiO₃ catalyst during the exemplary peroxymonosulfate activation process using X-ray absorption spectroscopy and in situ Raman spectroscopy, revealing the substrate tuned its structural evolution, which is the reversible stretching vibration of O-Sr-O and Co/Ti-O bonds in different orientations. This process effectively promotes the generation of key SO₅* intermediates, which is beneficial to the formation of ¹O₂ and SO₄^•- from persulfate on the Co active site. Density functional theory and X-ray absorption spectroscopy show that the optimized structural distortion enhanced the metal-oxygen bond strength by tuning the e_g orbitals and increased the number of transferred electrons to peroxymonosulfate by about 3-fold, achieving excellent efficiency and stability in removing organic pollutants.

Redox-Induced In Situ Growth of MnO2 with Rich Oxygen Vacancies over Monolithic Copper Foam for Boosting Toluene Combustion

Catalytic combustion has been known to be an effective technique in volatile organic compound (VOC) abatement. Developing monolithic catalysts with high activity at low temperatures is vital yet challenging in industrial applications. Herein, monolithic MnO₂-O_v/CF catalysts were fabricated via the in situ growth of K₂CuFe(CN)₆ (CuFePBA, a family of metal-organic frames) over copper foam (CF) followed by a redox-etching route. The as-synthesized monolith MnO₂-O_v-0.04/CF catalyst displays a superior low-temperature activity (T_90% = 215 °C) and robust durability for toluene elimination even in the presence of 5 vol % water. Experimental results reveal that the CuFePBA template not only guides the in situ growth of δ-MnO₂ with high loading over CF but also acts as a source of dopant to create more oxygen vacancies and weaken the strength of the Mn-O bond, which considerably improves the oxygen activation ability of δ-MnO₂ and consequently boosts the low-temperature catalytic activity of the monolith MnO₂-O_v-0.04/CF toward toluene oxidation. In addition, the reaction intermediate and proposed mechanism in the MnO₂-O_v-0.04/CF mediated catalytic oxidation process were investigated. This study provides new insights into the development of highly active monolithic catalysts for the low-temperature oxidation of VOCs.

Superexchange-induced Pt-O-Ti3+ site on single photocatalyst for efficient H2 production with organics degradation in wastewater

Efficient photocatalytic H2 production from wastewater instead of pure water is a dual solution to the environmental and energy crisis, but due to the rapid recombination of photoinduced charge in the photocatalyst and inevitable electron depletion caused by organic pollutants, a significant challenge of dual-functional photocatalysis (simultaneous oxidative and reductive reactions) in single catalyst is designing spatial separation path for photogenerated charges at atomic level. Here, we designed a Pt-doped BaTiO3 single catalyst with oxygen vacancies (BTPOv) that features Pt-O-Ti3+ short charge separation site, which enables excellent H2 production performance (1519 μmol·g-1·h-1) while oxidizing moxifloxacin (k = 0.048 min-1), almost 43 and 98 times than that of pristine BaTiO3 (35 μmol·g-1·h-1 and k = 0.00049 min-1). The efficient charge separation path is demonstrated that the oxygen vacancies extract photoinduced charge from photocatalyst to catalytic surface, and the adjacent Ti3+ defects allow rapid migration of electrons to Pt atoms through the superexchange effect for H* adsorption and reduction, while the holes will be confined in Ti3+ defects for oxidation of moxifloxacin. Impressively, the BTPOv shows an exceptional atomic economy and potential for practical applications, a best H2 production TOF (370.4 h-1) among the recent reported dual-functional photocatalysts and exhibiting excellent H2 production activity in multiple types of wastewaters.

Stable and Active Au Catalyst Supported on CeMnO3 Perovskite for Selective Oxidation of Glycerol

The selective oxidation of glycerol holds promise to transform glycerol into value-added chemicals. However, it remains a big challenge to achieve satisfactory selectivity toward the specific product at high conversion due to the multiple reaction pathways. Here, we prepare a hybrid catalyst via supporting Au nanoparticles on CeMnO₃ perovskite with a modest surface area, achieving promoted conversion of glycerol (90.1%) and selectivity of glyceric acid (78.5%), which are much higher than those of CeMnO_x solid-solution-supported Au catalysts with larger surface area and other Ce-based or Mn-based Au catalysts. The strong interaction between Au and CeMnO₃ perovskite facilitates the electron transfer from the B-site metal (Mn) in the CeMnO₃ perovskite to Au and stabilizes Au nanoparticles, which results in the enhanced catalytic activity and stability for glycerol oxidation. Valence band photoemission spectral analysis reveals that the uplifted d-band center of Au/CeMnO₃ promotes the adsorption of the glyceraldehyde intermediate on the catalyst surface, which benefits further oxidation of glyceraldehyde into glyceric acid. The flexibility of the perovskite support provides a promising strategy for the rational design of high-performance glycerol oxidation catalysts.

In Situ Exsolution of Ba3(VO4)2 Nanoparticles on a V-Doped BaCoO3-δ Perovskite Oxide with Enhanced Activity for Electrocatalytic Hydrogen Evolution

The successful preparation of a perovskite-based heterostructure is important for broadening the applications of perovskites in the field of electrocatalysis, especially in a hydrogen evolution reaction (HER). Nevertheless, the limited active sites of perovskites severely hindered the HER properties. Herein, an in situ exsolution method was used to construct a nanocomposite based on V-doped BaCoO_3-δ decorated with Ba₃(VO₄)₂ (BVCO19) for alkaline HER. The exsolved Ba₃(VO₄)₂ can induce more Co⁴⁺ ions on BaCoO_3-δ, which serves as active sites for the release of H₂. Meanwhile, by regulating the valency of V and Co species, the catalyst can reach a charge balance by generating more oxygen vacancies, which greatly facilitates the adsorption and dissociation of H₂O molecules. The synergistic effect between the oxygen vacancies and high-valence Co⁴⁺ leads to an enhanced HER performance of BVCO19. The as-obtained catalyst delivers a low overpotential of 194 mV at 10 mA cm^-2 as well as impressive stability for 100 h in alkaline media, which outperforms pristine BaCoO_3-δ and most of the nonprecious-based perovskite oxides. This work provides new insights into the preparation of perovskite-based heterostructure for boosting HER.

Boosting catalytic activity of SrCoO2.52 perovskite by Mn atom implantation for advanced peroxymonosulfate activation

Material-enhanced heterogeneous peroxymonosulfate (PMS) activation for degradation of antibiotic in water has attracted intensive attention. However, one challenge is the electron transfer efficiency from the material to PMS for reactive oxygen species (ROS) production. Considering that the B-sites of perovskite oxides are closely associated with the catalytic performance, partial substitution of the B-sites of perovskite oxides can enhance the redox cycle of metals. Consequently, adjusting the ratio of each element at the B site can introduce oxygen vacancies on the surface of perovskite. Herein, a method was developed in which manganese (Mn) partially substitutes B-sites to modify surface properties of SrCoO_2.52 perovskite oxides, resulting in the enhancement of catalytic activity. In degradation kinetics studies using SrCoMnO_3-δ-0.5/PMS (SrCoMnO_3-δ-0.5 denotes that the molar substitution of Mn at the B site of SrCoO_2.52 perovskite oxide is 0.5) reaction system and sulfamethoxazole (SMX) as the target pollutant, it was found that the reaction rate constant (k_obs) is 0.287 min^-1 which is 2.4 times that of SrCoO_2.52/PMS system. Experimental and theoretical analyses revealed that Mn-O covalent bonding governs the intrinsic catalytic activity of SrCoMnO_3-δ-0.5 perovskite oxides. The Mn sites exhibits stronger adsorption energy with PMS than the Co sites, facilitating the breaking of O-O bond. Simultaneously, oxygen vacancies and surface adsorbed oxygen species have a synergistic effect for PMS adsorption. This work can provide a potential route in developing advanced catalysts based on manipulation of the B-sites of perovskite oxides for PMS activation.

Simultaneously Constructing Active Sites and Regulating Mn-O Strength of Ru-Substituted Perovskite for Efficient Oxidation and Hydrolysis Oxidation of Chlorobenzene

Chlorinated volatile organic compounds (CVOCs) are a class of hazardous pollutants that severely threaten environmental safety and human health. Although the catalytic oxidation technique for CVOCs elimination is effective, enhancing the catalytic efficiency and simultaneously inhibiting the production of organic byproducts is still of great challenge. Herein, Ru-substituted LaMn(Ru)O_{3+ δ} perovskite with Ru-O-Mn structure and weakened Mn-O bond strength has been developed for catalytic oxidation of chlorobenzene (CB). The formed Ru-O-Mn structure serves as favorable sites for CB adsorption and activation, while the weakening of Mn-O bond strength facilitates the formation of active oxygen species and improves oxygen mobility and catalyst reducibility. Therefore, LaMn(Ru)O_{3+ δ} exhibits superior low-temperature activity with the temperature of 90% CB conversion decreasing by over 90 °C compared with pristine perovskite, and the deep oxidation of chlorinated byproducts produced in low temperature is also accelerated. Furthermore, the introduction of water vapor into reaction system triggers the process of hydrolysis oxidation that promotes CB destruction and inhibits the generation of chlorinated byproducts, due to the higher-activity *OOH species generated from the dissociated H₂ O reacting with adsorbed oxygen. This work can provide a unique, high-efficiency, and facile strategy for CVOCs degradation and environmental improvement.

Catalytic Degradation of Toluene over MnO2/LaMnO3: Effect of Phase Type of MnO2 on Activity

Series of α, β, γ, δ type MnO2 supported on LaMnO3 perovskite was developed by a one-pot synthesis route. Compared with α-MnO2, β-MnO2, γ-MnO2, δ-MnO2 and LaMnO3 oxides, all MnO2/LaMnO3 showed promotional catalytic performance for toluene degradation. Among them, α-MnO2/LaMnO3 holds the best active and mineralization efficiency. By the analysis of N2 adsorption-desorption, XPS and H2-TPR, it can be inferred that the improved activity should be ascribed to the higher proportion of lattice oxygen, better low-temperature reducibility and larger specific surface area. Besides, the byproducts from the low-temperature reaction of toluene oxidation were detected by a TD/GC-MS, confirming the presence of the intermediates. Combined with the in-situ DRIFTS, the catalytic degradation path of toluene oxidation has also been discussed in depth.

Investigation of defect-rich CeO2 catalysts for super low-temperature catalytic oxidation and durable styrene removal

Spherical cerium dioxide (CeO₂-S) nanoparticles were successfully prepared using a solvothermal method, and their performances in catalytic oxidation reactions were studied. The CeO₂-S catalyst showed superior low-temperature catalytic activity for styrene removal (T₉₀ = 118 °C, GHSV = 18,000 h^-1) compared with commercial CeO₂. The characterization results showed that there were numerous oxygen defects in CeO₂-S that were key to its catalytic performance at low temperatures, high redox properties, and high adsorption capacity for the reaction gases (O₂ and styrene). Moreover, the catalytic performance of CeO₂-S was highly stable (132 h), and the particles were reusable. FTIR and in-situ DRIFTS results showed that the type of intermediates formed during the oxidation of styrene determined the CeO₂ catalytic stability, and the main intermediates were bidentate carbonate species that accumulated on the surface of deactivated CeO₂-S and were not thermally stable. Moreover, the soft carbon that also deposited on CeO₂-S during the reaction was easily decomposed at higher temperatures. The role of the oxygen vacancies on the CeO₂-S catalyst was further revealed by correlating the concentration of oxygen vacancies and the accumulation of coke on the catalyst surface.

Substitution of B-site in BaSb2O6 perovskite for surface lattice oxygen activation and boosted photocatalytic toluene mineralization

Perovskite oxides possess significant prospects in environment application because of their compositional versatility and controllable band structure for redox reactions. Nevertheless, low charge separation and limited reactants activation restrict their performance for practical applications. In this work, we reveal that the electronic structure of BaSb₂O₆ can be modulated effectively by substituting B-site cations, leading to broadened light response range and promoted carrier separation. The Ga atoms substitute the Sb atoms to form GaO bonds and enable octahedral distortion, resulting in the electron transfer from Ga atom to O atoms and realizing lattice oxygen activation. The unique electronic localization in the BaSb₂O₆ surface facilitates the adsorption and activation of O₂, H₂O, toluene and reaction intermediates, thus enhancing ROS generation for toluene mineralization. Compared with the performance of pure BaSb₂O₆, the photocatalytic toluene degradation and mineralization of 5 wt% Ga-BaSb₂O₆ are increased by 4.5 times and 4.8 times without obvious deactivation. The reported facile and valid strategy for in situ controlling of B-site in perovskite and their unique effects on the electronic structure would benefit the development of high-performance perovskites for environmental applications.

Acid Etching-Induced In Situ Growth of λ-MnO2 over CoMn Spinel for Low-Temperature Volatile Organic Compound Oxidation

Surface lattice oxygen is crucial to the degradation of volatile organic compounds (VOCs) over transition metal oxides according to the Mars-van Krevelen mechanism. Herein, λ-MnO₂ in situ grown on the surface of CoMn spinel was prepared by acid etching of corresponding spinel catalysts (CoMn-Hx-Ty) for VOC oxidation. Experimental and relevant theoretical exploration revealed that acid etching on the CoMn spinel surface could decrease the electron cloud density around the O atom and weaken the adjacent Mn-O bond due to the fracture of the surface Co-O bond, facilitating electron transfer and subsequently the activation of surface lattice oxygen. The obtained CoMn-H1-T1 exhibited an excellent catalytic performance with a 90% acetone conversion at 149 °C, which is 42 °C lower than that of CoMn spinel. Furthermore, the partially maintained spinel structure led to better stability than pure λ-MnO₂. In situ diffuse reflectance infrared Fourier transform spectroscopy confirmed a possible degradation pathway where adsorptive acetone converted into formate and acetate species and into CO₂, in which the consumption of acetate was identified as the rate-limiting step. This strategy can improve the catalytic performance of metal oxides by activating surface lattice oxygen, to broaden their application in VOC oxidation.

Mesoporous LaCoO3 perovskite oxide with high catalytic performance for NOx storage and reduction

A mesoporous LaCoO₃ perovskite oxide (LaCoO₃-Meso) with three-dimensionally ordered helical interwoven structure was synthesized by a nano-casting method using KIT-6 as the hard template. The obtained LaCoO₃-Meso with high surface area was tested for its catalytic performance in the NO_x storage and reduction (NSR) reaction and compared with a sample synthesized by the conventional sol-gel method. The LaCoO₃-Meso showed a significant advantage for NO_x storage, with a NO_x storage capacity 2 times higher than the regular sample. LaCoO₃-Meso also exhibited improved NSR catalytic performance in the 150-450 °C temperature range, especially within 350-400 °C, where the NO_x conversion was raised for 40%. The results of X-ray photoelectron spectroscopy and X-ray absorption fine structure measurements suggested the presence of a high concentration of oxygen defects on the LaCoO₃-Meso surface. Further results provided by temperature programmed reduction and temperature programmed desorption indicated that the oxygen defects not only increase the amount of trapped NO_x, but also improve the low-temperature redox performance of the catalyst. The lower stability of NO_x species adsorbed on oxygen defects promotes the NO_x release step in the NSR reaction and benefits the regeneration of storage sites.

Interaction Mechanism for Simultaneous Elimination of Nitrogen Oxides and Toluene over the Bifunctional CeO2-TiO2 Mixed Oxide Catalyst

Simultaneous catalytic elimination of nitrogen oxides (NO_x, x = 1 and 2) and volatile organic compounds (VOCs) is of great importance for environmental preservation in China. In this work, the interactions of simultaneous removal of NO_x and methylbenzene (PhCH₃) were investigated on a CeO₂-TiO₂ mixed oxide catalyst, which demonstrated excellent bifunctional removal efficiencies for the two pollutants. The results indicated that NO_x positively promotes PhCH₃ oxidation, while NH₃ negatively inhibits through competitive adsorption with PhCH₃. The underlying mechanism is that a pseudo PhCH₃-SCR reaction happened in this process is parallel to NH₃-SCR. Combined with in situ diffuse reflectance infrared Fourier transform spectroscopy and quasi in situ X-ray photoelectron spectroscopy, the interaction mechanism between NO_x and PhCH₃ is proposed. Specifically, NO_x is adsorbed on the catalyst surface to produce nitrate species, which reacts with the carboxylate generated during PhCH₃ oxidation to form organic nitrogen intermediates that create N₂ and CO₂ in the following reactions. In the reaction process, the superoxide (O₂^-) generated by O₂ activation on the catalyst surface is an important species for the propelling of oxidation reaction. This work could provide guidelines for the design of state-of-the-art catalysts for simultaneous catalytic removal of NO_x and VOCs.