Programmable Transient Supramolecular Chiral G-quadruplex Hydrogels via a Chemically Fueled Non-Equilibrium Self-assembly Strategy

Ionic fuel-powered hydrogel actuators for soft robotics

HYPOTHESIS

Hydrogel actuators powered by chemical fuels are pivotal in autonomous soft robotics. Nevertheless, chemical waste accumulation caused by chemical fuels hampers the development of programmable and reusable hydrogel actuating systems. We propose the concept of ionic fuel-powered soft robotics which are constructed by programmable salt-responsive actuators and use waste-free ionic fuels.

EXPERIMENTS

Herein, soft hydrogel actuators were developed by orchestrating the Janus bilayer hydrogels' capacity for swelling and shrinking. Decomposable and easily removable ionic fuels were applied to power the actuators. Swelling tests were used to evaluate the deformability of the hydrogels. Tensile tests were performed to investigate the modulus of the hydrogels. The bonded interface composed of the interpenetrating polymer chains from both hydrogel layers bilayer was evidenced by the optical microscopy and scanning electron microscopy. The ionic conductivities of solutions were determined by a conductivity meter. Furthermore, a range of biomimetic soft robots with various shapes and asymmetrical structures have been designed and fabricated to execute complex functions.

FINDINGS

The programmable actuators powered by ionic fuel exhibit adjustable bending orientations, amplitudes, and durations, along with consistent cyclic actuations enabled by replenishment of the fuel without noticeable loss in performance. Many life-like programmable soft robotic systems were designed, indicating spatiotemporally controllable functions.

Novel aerogels based on supramolecular G-quadruplex assembly with intrinsic flame retardancy and thermal insulation

The construction of supramolecular aerogels still faces great challenges. Herein, we present a novel bio-based supramolecular aerogel derived from G-Quadruplex self-assembly of guanosine (G), boric acid (B) and sodium alginate (SA) and the obtained GBS aerogels exhibit superior flame-retardant and thermal insulating properties. The entire process involves environmentally friendly aqueous solvents and freeze-drying. Benefiting from the supramolecular self-assembly and interpenetrating dual network structures, GBS aerogels exhibit unique structures and sufficient self-supporting capabilities. The resulting GBS aerogels exhibit overall low densities (36.5-52.4 mg/cm3), and high porosities (>95 %). Moreover, GBS aerogels also illustrate excellent flame retardant and thermal insulating properties. With an oxygen index of 47.0-51.1 %, it can easily achieve a V-0 rating and low heat, smoke release during combustion. This work demonstrates the preparation of intrinsic flame-retardant aerogels derived from supramolecular self-assembly and dual cross-linking strategies, and is expected to provide an idea for the realization and application of novel supramolecular aerogel materials.

Hydration effect and molecular geometry conformation as critical factors affecting the longevity stability of G4-structure-based supramolecular hydrogels

Nucleoside-derived supramolecular hydrogels based on G4-structures have been extensively developed in the biomedical sector and recognized for superior excellent biocompatibility and biodegradability. However, limited longevity and stability present a significant challenge. Chemical modifications in the molecular structure have been shown to enhance the longevity stability of G4-structure-based supramolecular hydrogels, but the precise way in which the molecular structure impacts the stability of the G4-structures and consequently affects the properties of the hydrogel remains to be elucidated. This issue represents a notable challenge in the field, which restricts their further applications to some extent. In this study, single crystals of Gd, αGd and αGd* were cultivated and compared with G. Notably, before this study, the single crystal structures of all natural nucleosides, with the exception of Gd, had been determined. The investigation into the molecular structure and supramolecular self-assembly properties of four guanosine analogs at the atomic scale revealed that the formation of G-quartets is critical for their ability to form hydrogels. The stability of the sugar ring geometry conformation (an intrinsic factor) and the disorder and strength of the hydration effect (extrinsic factors) are vital for maintaining the stability of the G4-structures. The rapid cooling changes the molecular geometry conformation, and the organic solvent changes the hydration effect, which can improve the longevity stability of G4-structure-based supramolecular hydrogels instead of chemical modifications. Consequently, the lifespan of the hydrogels was extended from 2 h to over one week. This advancement is expected to offer significant insights for future research in designing and developing G4-structure-based supramolecular hydrogels.

Chemical Reaction Steers Spatiotemporal Self-Assembly of Supramolecular Hydrogels

Supramolecular structures are widespread in living system, which are usually spatiotemporally regulated by sophisticated metabolic processes to enable vital biological functions. Inspired by living system, tremendous efforts have been made to realize spatiotemporal control over the self-assembly of supramolecular materials in synthetic scenario by coupling chemical reaction with molecular self-assembly process. In this review, we focused on the works related to supramolecular hydrogels that are regulated in space and time using chemical reaction. Firstly, we summarized how spatially controlled self-assembly of supramolecular hydrogels can be achieved via chemical reaction-instructed self-assembly, and the application of such a self-assembly methodology in biotherapy was discussed as well. Second, we reviewed dynamic supramolecular hydrogels dictated by chemical reaction networks that can evolve their structures and properties against time. Third, we discussed the recent progresses in the control of the self-assembly of supramolecular hydrogels in both space and time though a reaction-diffusion-coupled self-assembly approach. Finally, we provided a perspective on the further development of spatiotemporally controlled supramolecular hydrogels using chemical reaction in the future.

Enzyme Fueled Dissipative Self-assembly of Guanine Functionalized Molecules and Their Cellular Behaviour

Generally, an esterase lipase enzyme can hydrolyze specific substrates called esters in an aqueous solution. Herein, we investigate how a G-quadruplex self-assembly affects the hydrolysis equilibrium in reverse. The biocatalyst, lipase, activates the individual building-blocks through fuel consumption, causing them to undergo a higher degree of self-organization into nanofibers within spheres. We have synthesized five peptide-lipid-conjugated guanine base functionalized molecules to explore how the equilibrium can be shifted through reverse hydrolysis. Among these, NAC5 self-assembled into a G-quadruplex structure which has been confirmed by various spectroscopic techniques. The wide-angle powder XRD, ThT dye binding assay and circular dichroism study is carried out to support the presence of the G-quadruplex structure. The biocatalytic formation of nanofibers enclosed spheres is analyzed using CLSM, FE-SEM and HR-TEM experiments. Additionally, we assess the biocompatibility of the enzyme fueled dissipative self-assembled fibers enclosed spheres, as they have potential applications as a biomaterial in protocells. MTT assay is performed to check the cytotoxicity of G-quadruplex hydrogel, using HEK 293 and McCoy cell lines for viability assessment. Finally, the utility of the novel NAC5 hydrogel as a wound repairing biomaterial is demonstrated by cell migration experiment in a scratch assay.

Design and synthesis of a nucleobase functionalized peptide hydrogel: in vitro assessment of anti-inflammatory and wound healing effects

Over the past several years, a significant increase in the expanding field of biomaterial sciences has been observed due to the development of biocompatible materials based on peptide derivatives that have intrinsic therapeutic potential. In this report, we synthesized nucleobase functionalized peptide derivatives (NPs). Hydrogelation in the synthesized NPs was induced by increasing their hydrophobicity with an aromatic moiety. The aggregation behavior of the NPs was analyzed by performing molecular dynamics simulations and DOSY NMR experiments. We performed circular dichroism (CD), thioflavin-T binding and PXRD to characterize the supramolecular aggregation in the NP1 hydrogel. The mechanical strength of the NP1 hydrogel was tested by performing rheological experiments. TEM and SEM experiments were performed to investigate the morphology of the NP1 hydrogel. The biocompatibility of the newly synthesized NP1 hydrogel was investigated using McCoy and A549 cell lines. The hemolytic activity of the NP1 hydrogel was examined in human blood cells. The stability of the newly formed NP1 hydrogel was examined using proteinase K and α-chymotrypsin. The NP1 hydrogel was used for in vitro wound healing. Western blotting, qRT-PCR and DCFDA assay were performed to determine the anti-inflammatory activity of the NP1 hydrogel. The synthesized NP1 hydrogel also exhibits antibacterial efficacy.

Synthetic approaches of carbohydrate based self-assembling systems

Carbohydrate-based self-assembling systems are essential for the formation of advanced biocompatible materials via a bottom-up approach. The self-assembling of sugar-based small molecules has applications encompassing many research fields and has been studied extensively. In this focused review, we will discuss the synthetic approaches for carbohydrate-based self-assembling (SA) systems, the mechanisms of the assembly, as well as the main properties and applications. This review will mainly cover recent publications in the last four years from January 2020 to December 2023. We will essentially focus on small molecule self-assembly, excluding polymer-based systems, which include various derivatives of monosaccharides, disaccharides, and oligosaccharides. Glycolipids, glycopeptides, and some glycoconjugate-based systems are discussed. Typically, in each category of systems, the system that can function as low molecular weight gelators (LMWGs) will be discussed first, followed by self-assembling systems that produce micelles and aggregates. The last section of the review discusses stimulus-responsive self-assembling systems, especially those forming gels, including dynamic covalent assemblies, chemical-triggered systems, and photoresponsive systems. The review will be organized based on the sugar structures, and in each category, the synthesis of representative molecular systems will be discussed next, followed by the properties of the resulting molecular assemblies.

Spatiotemporal control over self-assembly of supramolecular hydrogels through reaction-diffusion

Supramolecular self-assembly is ubiquitous in living system and is usually controlled to proceed in time and space through sophisticated reaction-diffusion processes, underpinning various vital cellular functions. In this contribution, we demonstrate how spatiotemporal self-assembly of supramolecular hydrogels can be realized through a simple reaction-diffusion-mediated transient transduction of pH signal. In the reaction-diffusion system, a relatively faster diffusion of acid followed by delayed enzymatic production and diffusion of base from the opposite site enables a transient transduction of pH signal in the substrate. By coupling such reaction-diffusion system with pH-sensitive gelators, dynamic supramolecular hydrogels with tunable lifetimes are formed at defined locations. The hydrogel fibers show interesting dynamic growing behaviors under the regulation of transient pH signal, reminiscent of their biological counterpart. We further demonstrate a proof-of-concept application of the developed methodology for dynamic information encoding in a soft substrate. We envision that this work may provide a potent approach to enable transient transduction of various chemical signals for the construction of new colloidal materials with the capability to evolve their structures and functionalities in time and space.

Bio-Inspired Far-From-Equilibrium Hydrogels: Design Principles and Applications

Inspired from dynamic living systems that operate under out-of-equilibrium conditions in biology, developing supramolecular hydrogels with self-regulating and autonomously dynamic properties to further advance adaptive hydrogels with life-like behavior is important. This review presents recent progress of bio-inspired supramolecular hydrogels out-of-equilibrium. The principle of out-of-equilibrium self-assembly for creating bio-inspired hydrogels is discussed. Various design strategies have been identified, such as chemical-driven reaction cycles with feedback control and physically oscillatory systems. These strategies can be coupled with hydrogels to achieve temporal and spatial control over structural and mechanical properties as well as programmable lifetime. These studies open up huge opportunities for potential applications, such as fluidic guidance, information storage, drug delivery, actuators and more. Finally, we address the challenges ahead of us in the coming years, and future possibilities and prospects are identified.

Dynamic supramolecular hydrogels mediated by chemical reactions

Supramolecular self-assembly in a biological system is usually dominated by sophisticated metabolic processes (chemical reactions) such as catalysis of enzymes and consumption of high energy chemicals, leading to groups of biomolecules with unique dynamics and functions in an aqueous environment. In recent years, increasing efforts have been made to couple chemical reactions to molecular self-assembly, with the aim of creating supramolecular materials with lifelike properties and functions. In this feature article, after summarising the work of chemical reaction mediated supramolecular hydrogels, we first focus on a typical example where dynamic self-assembly of molecular hydrogels is activated by in situ formation of a hydrazone bond in water. We discuss how the formation of the hydrazone-based supramolecular hydrogels can be controlled in time and space. After that, we describe transient assembly of supramolecular hydrogels powered by out-of-equilibrium chemical reaction networks regulated by chemical fuels, which show unique properties such as finite lifetime, dynamic structures, and regenerative capabilities. Finally, we provide a perspective on the future investigations that need to be done urgently, which range from fundamental research to real-life applications of dynamic supramolecular hydrogels.

Dynamic Growth of Macroscopically Structured Supramolecular Hydrogels through Orchestrated Reaction-Diffusion

Living organisms are capable of dynamically changing their structures for adaptive functions through sophisticated reaction-diffusion processes. Here we show how active supramolecular hydrogels with programmable lifetimes and macroscopic structures can be created by relying on a simple reaction-diffusion strategy. Two hydrogel precursors (poly(acrylic acid) PAA/CaCl2 and Na2 CO3 ) diffuse from different locations and generate amorphous calcium carbonate (ACC) nanoparticles at the diffusional fronts, leading to the formation of hydrogel structures driven by electrostatic interactions between PAA and ACC nanoparticles. Interestingly, the formed hydrogels are capable of autonomously disintegrating over time because of a delayed influx of electrostatic-interaction inhibitors (NaCl). The hydrogel growth process is well explained by a reaction-diffusion model which offers a theoretical means to program the dynamic growth of structured hydrogels. Furthermore, we demonstrate a conceptual access to dynamic information storage in soft materials using the developed reaction-diffusion strategy. This work may serve as a starting point for the development of life-like materials with adaptive structures and functionalities.

Temporal Control of Fluorescent EuW10 Aggregates for Autonomous DNA Capture and Information Encryption

Self-assembly exploits noncovalent interaction to offer an effective method for the fabrication of materials. For Na9 [EuW10 O36 ] ⋅ 32H2 O (EuW10 ), the negative charges and abundant oxygen atoms on its surface provide a handle for static self-assembly. New properties are envisioned for EuW10 aggregates which are able to display such kinetics and time-programming characteristics, in order to satisfy more complex and intelligent application scenarios, such as DNA binding and information encryption. In this work, EuW10 coupling with stimuli-responsive dodecyl dimethylamine oxide (C12 DMAO) can generate versatile aggregates with pH-responsive properties. We demonstrated the temporal programming of the assembly and disassembly of EuW10 nanospheres using a pH clock reaction of acid/urease hydrolysis. The pH clock reaction endows EuW10 assemblies with dynamical properties, in which the charges and fluorescence changes are coded in this system. These fluorescent assemblies provide new application in time-programmed DNA capture and information encryption.

Engineering metabolic cycle-inspired hydrogels with enzyme-fueled programmable transient volume changes

An enzyme-fueled transient volume phase transition (TVPT) of hydrogels under out-of-equilibrium conditions is reported. The approach takes inspiration from the metabolic cycle, comprising nutrient intake and anabolism/catabolism followed by waste excretion. The incorporation of methacrylic acid and acrylated trypsin in a polymeric hydrogel allowed the TVPT of the gel to be fueled by lysozyme. With the intake of lysozyme as fuel, the construction/destruction of electrostatic cross-linkages induced transient shrinkage/swelling of the gel accompanied by the depletion of lysozyme activity. The system's transient response could be flexibly programmed by adjusting not only the fuel concentration but the chemical composition of materials. The lysozyme-fueled TVPT of the gel could be exploited to transient changes in the mechanical properties of the gel. Our work opens a route toward a new class of stimuli-responsive hydrogels for biomedical applications.

Bis-Pyridine-Based Organogel with AIE Effect and Sensing Performance towards Hg2

A novel gelator (1) based on a bis-pyridine derivative was designed and synthesized, which could form stable gels in methanol, ethanol, acetonitrile, ethyl acetate, DMF/H₂O (4/1, v/v) and DMSO/H₂O (4/1, v/v). The self-assembly process of gelator 1 was studied by field emission scanning electron microscopy (FESEM), UV–vis absorption spectroscopy, fluorescence emission spectroscopy, Fourier transform infrared spectroscopy (FT-IR), X-ray powder diffraction and a water contact angle experiment. Gelator 1 exhibited obvious AIE behavior. On the base of its AIE, the gel of 1 could detect Hg²⁺, which resulted in fluorescence quenching and a gel–sol transition. ¹H NMR titration experiments with Hg²⁺ revealed that the metal coordination interaction induced the fluorescence quenching and the breakdown of the noncovalent interaction in the gel system. This research provides a new molecular mode for designing a functional self-assembly gel system.

Guanine Analogue-Based Assemblies: Construction and Luminescence Functions

As one of the natural nucleobases, guanine has attracted increasing interest in molecular self-assembly science because of its abundant interaction sites and high electron cloud density. Guanines, guanine derivatives, and guanine-rich DNA sequence are able to self-assemble into versatile aggregate structures by the means of hydrogen bonds and π-π, ion-dipole, solvophobic, and electrostatic interactions. Recent advances have shown that many guanine analogue-based (G-based) luminescent aggregates exhibit promising applications for fluorescent and chemiluminescent sensing and circularly polarized luminescence (CPL). This perspective summarizes the state-of-art strategies for constructing G-based assemblies and presents representative examples for luminescence functions. Finally, the inspirations are provided for exploiting unique G-based systems and luminescent G-based assemblies.