Reversible Supramolecular Polymorphism in Solution and Solid Matrix by Manipulating Sidegroup Conformation

Self-Adaptive Aromatic Cation-π Driven Dimensional Polymorphism in Supramolecular Polymers for the Photocatalytic Oxidation and Separation of Aromatic/Cyclic Aliphatic Compounds

The phenomenon of polymorphism is ubiquitous in nature, the controlled manipulation of which not only increases our ontological understanding of nature but also facilitates the conceptualization and realization of novel functional materials. However, achieving targeted polymorphism in supramolecular assemblies (SAs) remains a formidable challenge, largely because of the constraints inherent in controlling the specific binding motifs of noncovalent interactions. Herein, we propose self-adaptive aromatic cation-π binding motifs to construct polymorphic SAs in both the solid and solution states. Using distinct discrete cation-π-cation and long-range cation-π binding motifs enables control of the self-assembly directionality of a C2h-symmetric bifunctional monomer, resulting in the successful formation of both two-dimensional and three-dimensional crystalline SAs (2D-CSA and 3D-CSA). The differences in the molecular packing of 3D-CSA compared with that of 2D-CSA significantly improve the charge separation and carrier mobility, leading to enhanced photocatalytic activity for the aerobic oxidation of thioanisole to methyl phenyl sulfoxide (yield of 99 % vs 57 %). 2D-CSA, which has a vertical extended structure with favorable stronger interaction with toluene though face-to-face cation-π interactions than methylcyclohexane, shows higher toluene/methylcyclohexane separation efficiency than 3D-CSA (96.9 % for 2D-CSA vs 56.3 % for 3D-CSA).

Noncovalent Catalyst-cum-Inhibitor Directed Supramolecular Pathway Selection and Asymmetry Amplification by Aggregate Cross-Nucleation

The key to any controlled supramolecular polymerization (CSP) process lies in controlling the nucleation step, which is typically achieved by sequestering monomers in a kinetically trapped state. However, kinetic traps that are shallow cannot prevent spontaneous nucleation, thus limiting the applicability of the CSP in such systems. We use a molecular additive to overcome this limitation by modifying the energy landscape of a competitive self-assembly process and increasing the kinetic stability of an otherwise short-lived trap state. The additive achieves this by simultaneously catalyzing OFF-pathway nucleation and inhibiting ON-pathway aggregation. In the process, it guides the molecular assembly exclusively toward the OFF-pathway aggregate analogue. The mechanisms of OFF-pathway catalysis and ON-pathway inhibition are elucidated. By specifically targeting the nucleation step, it was possible to achieve pathway selection at an extremely low additive-to-monomer ratio of 1:100. The generality of our approach is also demonstrated for other related molecular systems. Finally, removing the additive triggers the cross-nucleation of the ON-pathway aggregate on the surface of a less stable, OFF-pathway aggregate analogue. The resultant supramolecular polymer not only exhibits a more uniform morphology but more importantly, a marked improvement in the structural order that leads to an amplification of chiral asymmetry and a high absorption dissymmetry factor (gAbs) of ∼0.05.

Handedness-Inverted and Stimuli-Responsive Circularly Polarized Luminescent Nano/Micromaterials Through Pathway-Dependent Chiral Supramolecular Polymorphism

The precise manipulation of supramolecular polymorphs has been widely applied to control the morphologies and functions of self-assemblies, but is rarely utilized for the fabrication of circularly polarized luminescence (CPL) materials with tailored properties. Here, this work reports that an amphiphilic naphthalene-histidine compound (NIHis) readily self-assembled into distinct chiral nanostructures through pathway-dependent supramolecular polymorphism, which shows opposite and multistimuli responsive CPL signals. Specifically, NIHis display assembly-induced CPL from the polymorphic keto tautomer, which become predominant during enol-keto tautomerization shifting controlled by a bulk solvent effect. Interestingly, chiral polymorphs of nanofiber and microbelt with inverted CPL signals can be prepared from the same NIHis monomer in exactly the same solvent compositions and concentrations by only changing the temperature. The tunable CPL performance of the solid microbelts is realized under multi external physical or chemical stimuli including grinding, acid fuming, and heating. In particular, an emission color and CPL on-off switch based on the microbelt polymorph by reversible heating-cooling protocol is developed. This work brings a new approach for developing smart CPL materials via supramolecular polymorphism engineering.

Seed-Induced Living Two-Dimensional (2D) Supramolecular Polymerization in Water: Implications on Protein Adsorption and Enzyme Inhibition

In biological systems, programmable supramolecular frameworks characterized by coordinated directional non-covalent interactions are widespread. However, only a small number of reports involve pure water-based dynamic supramolecular assembly of artificial π-amphiphiles, primarily due to the formidable challenge of counteracting the strong hydrophobic dominance of the π-surface in water, leading to undesired kinetic traps. This study reveals the pathway complexity in hydrogen-bonding-mediated supramolecular polymerization of an amide-functionalized naphthalene monoimide (NMI) building block with a hydrophilic oligo-oxyethylene (OE) wedge. O-NMI-2 initially produced entropically driven, collapsed spherical particles in water (Agg-1); however, over a span of 72 h, these metastable Agg-1 gradually transformed into two-dimensional (2D) nanosheets (Agg-2), favoured by both entropy and enthalpy contributions. The intricate self-assembly pathways in O-NMI-2 enable us to explore seed-induced living supramolecular polymerization (LSP) in water for controlled synthesis of monolayered 2D assemblies. Furthermore, we demonstrated the nonspecific surface adsorption of a model enzyme, serine protease α-Chymotrypsin (α-ChT), and consequently the enzyme activity, which could be regulated by controlling the morphological transformation of O-NMI-2 from Agg-1 to Agg-2. We delve into the thermodynamic aspects of such shape-dependent protein-surface interactions and unravel the impact of seed-induced LSP on temporally controlling the catalytic activity of α-ChT.

Polymorphism Dependent Cytotoxicity, Cellular Uptake, and Live Cell Imaging Studies on Napthalimide-Vinyl-Phenothiazine Conjugate

Polymorphism-dependent cytotoxicity and cellular uptake of drug molecules have been studied for the past two decades. However, the visualization of polymorph-dependent cellular uptake and cytotoxicity using microscopy imaging techniques has not yet been reported. The luminescent polymorph is an ideal candidate to validate the above hypothesis. Herein, we report the polymorph-dependent cellular uptake, cytotoxicity, and bio-imaging functions of polymorphs 1Y and 1R of a naphthalimide-phenothiazine dyad. These polymorphs show different luminescence colors in the solid state and exhibit aggregation-induced enhanced emission (AIEE) in the DMSO-Water mixture. Bioimaging, cytotoxicity assay, and fluorescence-activated cell sorting (FACS) studies revealed that these polymorphs show different levels of cytotoxicity, cellular uptake, localization, and imaging potential. Detailed photophysical, morphological, and biological studies revealed that the difference in molecular conformation in these polymorphs enables them to form aggregates of different sizes and morphology, which leads to the differential uptake of these into the cells and consequently shows different cytotoxicity and imaging potentials.

Disassembly of spherical structures into nanohelices by good solvent dilution

Supramolecular self-assembly of low molecular weight molecules into various organic nanostructures has attracted considerable research interest. However, preparing organic nanostructures through a top-down method, such as the disassembly of one large structure into many smaller nanoscale nanostructures, still remains a big challenge. Here, we make use of anti-solvent method to regulate the hierarchical self-assembly of an achiral C3-symmetric molecule in THF/water to prepare various nanostructures, including spherical structures, nanofibers, nanoribbons and nanotwists. Interestingly, the spherical structures could disassemble into nanohelices through good solvent dilution, providing a nanoscale top-down method to prepare organic nanostructures.

Pathway-Dependent Self-Assembly for Control over Helical Nanostructures and Topochemical Photopolymerization

Pathway-dependent self-assembly, in which a single building block forms two or more types of self-assembled nanostructures, is an important topic due to its mimic to the complexity in biology and manipulation of diverse supramolecular materials. Here, we report a pathway-dependent self-assembly using chiral glutamide derivatives (L or D-PAG), which form chiral nanotwist and nanotube through a cooperative slow cooling and an isodesmic fast cooling process, respectively. Furthermore, pathway-dependent self-assembly can be harnessed to control over the supramolecular co-assembly of PAG with a luminophore β-DCS or a photopolymerizable PCDA. Fast cooling leads to the co-assembled PAG/β-DCS nanotube exhibiting green circularly polarized luminescence (CPL), while slow cooling to nanofiber with blue CPL. Additionally, fast cooling process promotes the photopolymerization of PCDA into a red chiral polymer, whereas slow cooling inhibits the polymerization. This work not only demonstrates the pathway-dependent control over structural characteristics but also highlights the diverse functions emerged from the different assemblies.

Chiral and Morphological Anisotropy of Supramolecular Polymers Shaped by a Singularity in Solvent Composition

Understanding the role of solvent in translating molecular anisotropy to supramolecular polymers is in the early stages. A solvent's influence on the strength of different noncovalent interactions can explain anisotropic growth in some cases, but its effect on cooperative processes, particularly in mixed solvents, remains obscure. We report the self-assembly of a series of chiral perylene bisimides in water-cosolvent mixtures, and the results highlight the fascinating influence of solvent-solute interactions on supramolecular anisotropy, both chiral and morphological. The initial assembly is agnostic to solvent composition, resulting in weakly chiral, spherical nanostructures. In an extremely narrow solvent composition range, the nanospheres transform into long, prominently chiral supramolecular polymers. Further, chirality can be fully reversed by changing the good (achiral) cosolvent. We elucidate how solvent modulates specific noncovalent interactions and governs the kinetics and thermodynamics of key processes, such as spontaneous phase segregation, secondary nucleation, and cooperative growth. In the context of supramolecular polymerization, our results encourage one to steer the focus away from the physical attributes of a solvent (polarity, phase diagram, etc.) and toward the complexities of solvent-solute interactions.

Mechanistic study of the formation of arbutin polymorphs and solvates

Six solid forms of arbutin are successfully obtained and four single crystal structures are reported for the first time. Further, the formation mechanism of arbutin solvates is proposed and rationalized.

Thermoreversible Polymorph Transitions in Supramolecular Polymers of Hydrogen-Bonded Squaramides

Hydrogen-bonded squaramide (SQ) supramolecular polymers exhibit uncommon thermoreversible polymorph transitions between particle- and fiber-like nanostructures. SQs 1-3, with different steric bulk, self-assemble in solution into particles (AggI) upon cooling to 298 K, and SQs 1 and 2, with only one dendronic group, show a reversible transformation into fibers (AggII) by further decreasing the temperature to 288 K. Nano-DSC and UV/Vis studies on SQ 1 reveal a concentration-dependent transition temperature and ΔH for the AggI-to-AggII conversion, while the kinetic studies on SQ 2 indicate the on-pathway nature of the polymorph transition. Spectroscopic and theoretical studies reveal that these transitions are triggered by the molecular reorganization of the SQ units changing from slipped to head-to-tail hydrogen bonding patterns. This work unveils the thermodynamic and kinetic aspects of reversible polymorph transitions that are of interest to develop stimuli-responsive systems.

Multiple aggregates from multiple polymorphs: structural and mechanistic insight into organic dye aggregates

This case study provides evidence for the appearance of multiple aggregation forms of a single organic dye, arising from its packing polymorphs in the solid state. Each aggregate can be spectroscopically matched to one polymorph, acquiring nanoscopic structural information even in the absence of conventional H- or J-type aggregation spectral features. The conversion from one polymorphic aggregate to another supports the action of Ostwald's rule of stages in organic aggregates suspended in solution. Mechanistically, dye molecules from one aggregate dissociate then renucleate the more stable aggregate form, the first demonstration for an aggregation-induced emission-active organic dye.