Metal–Organic Frameworks for Ion Conduction

Mechanisms of the Accelerated Li+ Conduction in MOF-Based Solid-State Polymer Electrolytes for All-Solid-State Lithium Metal Batteries

Solid polymer electrolytes (SPEs) for lithium metal batteries have garnered considerable interests owing to their low cost, flexibility, lightweight, and favorable interfacial compatibility with battery electrodes. Their soft mechanical nature compared to solid inorganic electrolytes give them a large advantage to be used in low pressure solid-state lithium metal batteries, which can avoid the cost and weight of the pressure cages. However, the application of SPEs is hindered by their relatively low ionic conductivity. In addressing this limitation, enormous efforts are devoted to the experimental investigation and theoretical calculations/simulation of new polymer classes. Recently, metal-organic frameworks (MOFs) have been shown to be effective in enhancing ion transport in SPEs. However, the mechanisms in enhancing Li+ conductivity have rarely been systematically and comprehensively analyzed. Therefore, this review provides an in-depth summary of the mechanisms of MOF-enhanced Li+ transport in MOF-based solid polymer electrolytes (MSPEs) in terms of polymer, MOF, MOF/polymer interface, and solid electrolyte interface aspects, respectively. Moreover, the understanding of Li+ conduction mechanisms through employing advanced characterization tools, theoretical calculations, and simulations are also reviewed in this review. Finally, the main challenges in developing MSPEs are deeply analyzed and the corresponding future research directions are also proposed.

Pentazolate Anion: A Rare and Preferred Five-Membered Ligand for Constructing Pentasil-Zeolite Topology Architectures

As the fourth full-nitrogen structure, the pentazolate anion (cyclo-N5 - ) was highly coveted for decades. In 2017, the first air-stable non-metal pentazolate salt, (N5 )6 (H3 O)3 (NH4 )4 Cl, was obtained, representing a milestone in this field. As the latest member of the azole family, cyclo-N5 - is comprised of five nitrogen atoms. Although significant attention has been paid to the potential of cyclo-N5 - as an energetic material, its poor thermostability hinders any practical application. However, the unique ring structure and multiple coordination capability of cyclo-N5 - provide a platform for the fabrication of various structures, among which pentasil-zeolite topologies are the most intriguing. In addition, the introduction of structure-directing auxiliaries enables the self-assembly of diverse topological architectures, potentially imparting cyclo-N5 - with the potential to impact wide-ranging areas of coordination chemistry and topology. In this minireview, different pentasil-zeolite topologies based on metal-pentazolate frameworks are evaluated. To date, three zeolitic and zeolite-like topologies have been reported, namely the melanophlogite (MEP), chibaite (MTN), and unj topologies. The MEP topology consists of two nanocages, Na20 N60 and Na24 N60 , whereas the MTN topology contains Na20 N60 and Na28 N80 nanocages. Furthermore, the unj topology features multiple homochiral channels consisting of two helical chains. Various possible strategies for obtaining additional pentasil-zeolite topologies are also discussed.

Superprotonic Conductivity in a Metalloporphyrin-Based SMOF (Supramolecular Metal-Organic Framework)

Metal-organic frameworks and supramolecular metal-organic frameworks (SMOFs) exhibit great potential for a broad range of applications taking advantage of the high surface area and pore sizes and tunable chemistry. In particular, metalloporphyrin-based MOFs and SMOFs are becoming of great importance in many fields due to the bioessential functions of these macrocycles that are being mimicked. On the other hand, during the last years, proton-conducting materials have aroused much interest, and those presenting high conductivity values are potential candidates to play a key role in some solid-state electrochemical devices such as batteries and fuel cells. In this way, using metalloporphyrins as building units we have obtained a new crystalline material with formula [H(bipy)]2[(MnTPPS)(H2O)2]·2bipy·14H2O, where bipy is 4,4'-bipyidine and TPPS4- is the meso-tetra(4-sulfonatephenyl) porphyrin. The crystal structure shows a zig-zag water chain along the [100] direction located between the sulfonate groups of the porphyrin. Taking into account those structural features, the compound was tested for proton conduction by complex electrochemical impedance spectroscopy (EIS). The as-obtained conductivity is 1 × 10-2 S·cm-1 at 40 °C and 98% relative humidity, which is a remarkably high value.

Metal-Organic Frameworks for the Enhancement of Lithium-Based Batteries: A Mini Review on Emerging Functional Designs

Metal-organic frameworks (MOFs) have played a crucial role in recent advancements in developing lithium-based battery electrolytes, electrodes, and separators. Although many MOF-based battery components rely on their well-defined porosity and controllable functionality, they also boast a myriad of other significant properties relevant to battery applications. In this mini-review, the distinct advantages of MOFs in battery applications are discussed, including using MOFs to 1) scavenge impurities to increase cycling stability, 2) widen the operation temperature range of conventional electrolytes, 3) widen the operation voltage range of common electrolytes, and 4) employ as artificial solid-electrolyte interphases to prevent lithium dendrite growth. Furthermore, subsisting challenges of developing these emerging MOF-based battery technologies are discussed and guidance for shaping the future of this field is given.

Ultrafast Proton Conduction in an Aqueous Electrolyte Confined in Adamantane-like Micropores of a Sulfonated, Aromatic Framework

Sulfonated, cross-linked porous polymers are promising frameworks for aqueous high-performance electrolyte-host systems for electrochemical energy storage and conversion. The systems offer high proton conductivities, excellent chemical and mechanical stabilities, and straightforward water management. However, little is known about mass transport mechanisms in such nanostructured hosts. We report on the synthesis and postsynthetic sulfonation of an aromatic framework (SPAF-2) with a 3D-interconnected nanoporosity and varying sulfonation degrees. Water adsorption produces the system SPAF-2H20. It features proton exchange capacities up to 6 mequiv g-1 and exceptional proton conductivities of about 1 S cm-1. Two contributions are essential for the highly efficient transport. First, the nanometer-sized pores link the charge transport to the diffusion of adsorbed water molecules, which is almost as fast as bulk water. Second, continuous exchange between interface-bound and mobile species enhances the conductivities at elevated temperatures. SPAF-2H20 showcases how to tailor nanostructured electrolyte-host systems with liquid-like conductivities.

High-Performance Electrochemical Actuator under an Ultralow Driving Voltage with a Mixed Electronic-Ionic Conductive Metal-Organic Framework

Although versatile deformation, high flexibility, and environmental friendliness of electrochemical actuators (EAs) have made them promising in bioinspired soft robots and biomedical devices, the relatively high driving voltages unfortunately impose great restrictions on their applications in low-energy and human-friendly electronics. Here, we find that the uses of a mixed electronic-ionic conductive metal-organic framework (c-MOF), i.e., Ni3(hexaiminotriphenylene)2 (Ni3(HITP)2), largely lower the driving voltage of EAs. The as-fabricated EA can work under a driving voltage as low as 0.1 V, representing the lowest value among those for the c-MOF-based EAs reported so far. The Ni3(HITP)2-based EA shows an excellent actuation performance such as a high bending strain difference of 0.48% (±0.5 V, 0.1 Hz) and long-term durability of >99% after 15,000 cycles due to the improved conductivity up to 1000 S·cm-1 and double-layer capacitance as high as 176.3 F·g-1 stemming from the mixed electronic-ionic conduction of Ni3(HITP)2.

Bimetallic Anionic Organic Frameworks with Solid-State Cation Conduction for Charge Storage Applications

A new phosphonate-based anionic bimetallic organic framework, with the general formula of A4 -Zn-DOBDP (wherein A is Li+ or Na+ , and DOBDP6- is the 2,5-dioxido-1,4-benzenediphosphate ligand) is prepared and characterized for energy storage applications. With four alkali cations per formula unit, the A4 -Zn-DOBDP MOF is found to be the first example of non-solvated cation conducting MOF with measured conductivities of 5.4×10-8  S cm-1 and 3.4×10-8  S cm-1 for Li4 - and Na4 - phases, indicating phase and composition effects of Li+ and Na+ shuttling through the channels. Three orders of magnitude increase in ionic conductivity is further attained upon solvation with propylene carbonate, placing this system among the best MOF ionic conductors at room temperature. As positive electrode material, Li4 -Zn-DOBDP delivers a specific capacity of 140 mAh g-1 at a high average discharge potential of 3.2 V (vs. Li+ /Li) with 90 % of capacity retention over 100 cycles. The significance of this research extends from the development of a new family of electroactive phosphonate-based MOFs with inherent ionic conductivity and reversible cation storage, to providing elementary insights into the development of highly sought yet still evasive MOFs with mixed-ion and electron conduction for energy storage applications.

Construction of Zr-Metal-Organic Frameworks-Based Composite Materials toward Anhydrous Proton Conduction and Photocatalytic CO2 Reduction

Metal-organic frameworks constructed from Zr usually possess excellent chemical and physical stability. Therefore, they have become attractive platforms in various fields. In this work, two families of hybrid materials based on ZrSQU have been designed and synthesized, named Im@ZrSQU and Cu@ZrSQU, respectively. Im@ZrSQU was prepared through the impregnation method and employed for proton conduction. Im@ZrSQU exhibited terrific proton conduction performance in an anhydrous environment, with the highest proton conduction value of 3.6 × 10-2 S cm-1 at 110 °C. In addition, Cu@ZrSQU was synthesized via the photoinduction method for the photoreduction of CO2, which successfully promoted the conversion of CO2 into CO and achieved the CO generation rate of up to 12.4 μmol g-1 h-1. The photocatalytic performance of Cu@ZrSQU is derived from the synergistic effect of Cu NPs and ZrSQU. Based on an in-depth study and discussion toward ZrSQU, we provide a versatile platform with applications in the field of proton conduction and photocatalysis, which will guide researchers in their further studies.

High-Efficiency Lithium-Ion Transport in a Porous Coordination Chain-Based Hydrogen-Bonded Framework

Fast and selective Li⁺ transport in solid plays a key role for the development of high-performance solid-state electrolytes (SSEs) of lithium metal batteries. Porous compounds with tunable Li⁺ transport pathways are promising SSEs, but the comprehensive performances in terms of Li⁺ transport kinetics, electrochemical stability window, and interfacial compatibility are difficult to be achieved simultaneously. Herein, we report a porous coordination chain-based hydrogen-bonded framework (NKU-1000) containing arrayed electronegative sites for Li⁺ transport, exhibiting a superior Li⁺ conductivity of 1.13 × 10^-3 S cm^-1, a high Li⁺ transfer number of 0.87, and a wide electrochemical window of 5.0 V. The assembled solid-state battery with NKU-1000-based SSE shows a high discharge capacity with 94.4% retention after 500 cycles and can work over a wide temperature range without formation of lithium dendrites, which derives from the linear hopping sites that promote a uniformly high-rate Li⁺ flux and the flexible structure that can buffer the structural variation during Li⁺ transport.

Anhydrous Superprotonic Conductivity in the Zirconium Acid Triphosphate ZrH5 (PO4 )3

The development of solid-state proton conductors with high proton conductivity at low temperatures is crucial for the implementation of hydrogen-based technologies for portable and automotive applications. Here, we report on the discovery of a new crystalline metal acid triphosphate, ZrH₅ (PO₄ )₃ (ZP3), which exhibits record-high proton conductivity of 0.5-3.1×10^-2  S cm^-1 in the range 25-110 °C in anhydrous conditions. This is the highest anhydrous proton conductivity ever reported in a crystalline solid proton conductor in the range 25-110 °C. Superprotonic conductivity in ZP3 is enabled by extended defective frustrated hydrogen bond chains, where the protons are dynamically disordered over two oxygen centers. The high proton conductivity and stability in anhydrous conditions make ZP3 an excellent candidate for innovative applications in fuel cells without the need for complex water management systems, and in other energy technologies requiring fast proton transfer.