High‐Power Near‐Neutral Aqueous All Organic Redox Flow Battery Enabled with a Pair of Anionic Redox Species

Constructing Microporous Ion Exchange Membranes via Simple Hypercrosslinking for pH-Neutral Aqueous Organic Redox Flow Batteries

Ion exchange membranes (IEMs) play a critical role in aqueous organic redox flow batteries (AORFBs). Traditional IEMs that feature microphase-separated microstructures are well-developed and easily available but suffer from the conductivity/selectivity tradeoff. The emerging charged microporous polymer membranes show the potential to overcome this tradeoff, yet their commercialization is still hindered by tedious syntheses and demanding conditions. We herein combine the advantages of these two types of membrane materials via simple in situ hypercrosslinking of conventional IEMs into microporous ones. Such a concept is exemplified by the very cheap commercial quaternized polyphenylene oxide membrane. The hypercrosslinking treatment turns poor-performance membranes into high-performance ones, as demonstrated by the above 10-fold selectivity enhancement and much-improved conductivities that more than doubled. This turn is also confirmed by the effective and stable pH-neutral AORFB with decreased membrane resistance and at least an order of magnitude lower capacity loss rate. This battery shows advantages over other reported AORFBs in terms of a low capacity loss rate (0.0017 % per cycle) at high current density. This work provides an economically feasible method for designing AORFB-oriented membranes with microporosity.

High-voltage and dendrite-free zinc-iodine flow battery

Zn-I2 flow batteries, with a standard voltage of 1.29 V based on the redox potential gap between the Zn2+-negolyte (-0.76 vs. SHE) and I2-posolyte (0.53 vs. SHE), are gaining attention for their safety, sustainability, and environmental-friendliness. However, the significant growth of Zn dendrites and the formation of dead Zn generally prevent them from being cycled at high current density (>80 mA cm-2). In addition, the crossover of Zn2+ across cation-exchange-membrane also limits their cycle stability. Herein, we propose a chelated Zn(P2O7)26- (donated as Zn(PPi)26-) negolyte, which facilitates dendrite-free Zn plating and effectively prevents Zn2+ crossover. Remarkably, the utilization of chelated Zn(PPi)26- as a negolyte shifts the Zn2+/Zn plating/stripping potential to -1.08 V (vs. SHE), increasing cell voltage to 1.61 V. Such high voltage Zn-I2 flow battery shows a promising stability over 250 cycles at a high current density of 200 mA cm-2, and a high power density up to 606.5 mW cm-2.

Commercializable Naphthalene Diimide Anolytes for Neutral Aqueous Organic Redox Flow Batteries

Neutral aqueous organic redox flow batteries (AORFBs) hold the potential to facilitate the transition of renewable energy sources from auxiliary to primary energy, the commercial production of anolyte materials still suffers from insufficient performance of high-concentration and the high cost of the preparation problem. To overcome these challenges, this study provides a hydrothermal synthesis methodology and introduces the charged functional groups into hydrophobic naphthalene diimide cores, and prepares a series of high-performance naphthalene diimide anolytes. Under the synergistic effect of π-π stacking and H-bonding networks, the naphthalene diimide exhibits excellent structural stability and the highest water solubility (1.85 M for dex-NDI) reported to date. By employing the hydrothermal method, low-cost naphthalene diimides are successfully synthesized on a hundred-gram scale of $0.16 g-1 ($2.43 Ah-1), which is also the lowest price reported to date. The constructed full battery achieves a high electron concentration of 2.4 M, a high capacity of 54.4 Ah L-1, and a power density of 318 mW cm-2 with no significant capacity decay observed during long-duration cycling. These findings provide crucial support for the commercialization of AORFBs and pave the way for revolutionary developments in neutral AORFBs.

Realizing one-step two-electron transfer of naphthalene diimides via a regional charge buffering strategy for aqueous organic redox flow batteries

Naphthalene diimide derivatives show great potential for application in neutral aqueous organic redox flow batteries (AORFBs) due to their highly conjugated molecular structure and stable two-electron storage capacity. However, the two-electron redox process of naphthalene diimides typically occurs via two separate steps with the transfer of one electron per step ("two-step two-electron" transfer process), which leads to an inevitable loss of voltage and energy. Herein, we report a novel regional charge buffering strategy that utilizes the core-substituted electron-donating group to adjust the redox properties of naphthalene diimides, realizing two electron transfer via a single-step redox process ("one-step two-electron" transfer process). The symmetrical battery testing of NDI-DEtOH revealed exceptional intrinsic stability lasting for 11 days with a daily decay rate of only 0.11%. Meanwhile, AORFBs with NDI-DMe/FcNCl and NDI-DEtOH/FcNCl exhibited a remarkable 40% improvement in peak power density at 50% state of charge (SOC) in comparison to NDI/FcNCl-based AORFBs. In addition, the battery's energy efficiency has increased by 24%, resulting in much more stable output power and significantly improved energy efficiency. These results are of great significance to practical applications of AORFBs.

Enabling Long-Life Aqueous Organic Redox Flow Batteries with a Highly Stable, Low Redox Potential Phenazine Anolyte

Aqueous organic redox flow batteries (AORFBs) are considered a promising energy storage technology due to the sustainability and designability of organic active molecules. Despite this, most of AORFBs suffer from limited stability and low voltage because of the chemical instability and high redox potential of organic molecules in anolyte. Herein, we propose a new phenazine derivative, 4,4'-(phenazine-2,3-diylbis(oxy))dibutyric acid (2,3-O-DBAP), as a water-soluble and chemically stable anodic active molecules. By combining calculations and experiments, we demonstrate that 2,3-O-DBAP exhibits a higher solubility, a lower redox potential (-0.699 V vs SHE), and greater chemical stability than other O-DBAP isomers. Then, we demonstrate a long-lasting flow cell with an average discharge voltage of 1.12 V, a low fade rate of 0.0127%, and a lifespan of 62 days at pH 14 using 2,3-O-DBAP paired with ferri/ferrocyanide. The negligible self-discharge behavior also verifies the high stability of 2,3-O-DBAP. These results highlight the importance of molecular engineering for AORFBs.

Functional materials for aqueous redox flow batteries: merits and applications

Redox flow batteries (RFBs) are promising electrochemical energy storage systems, offering vast potential for large-scale applications. Their unique configuration allows energy and power to be decoupled, making them highly scalable and flexible in design. Aqueous RFBs stand out as the most promising technologies, primarily due to their inexpensive supporting electrolytes and high safety. For aqueous RFBs, there has been a skyrocketing increase in studies focusing on the development of advanced functional materials that offer exceptional merits. They include redox-active materials with high solubility and stability, electrodes with excellent mechanical and chemical stability, and membranes with high ion selectivity and conductivity. This review summarizes the types of aqueous RFBs currently studied, providing an outline of the merits needed for functional materials from a practical perspective. We discuss design principles for redox-active candidates that can exhibit excellent performance, ranging from inorganic to organic active materials, and summarize the development of and need for electrode and membrane materials. Additionally, we analyze the mechanisms that cause battery performance decay from intrinsic features to external influences. We also describe current research priorities and development trends, concluding with a summary of future development directions for functional materials with valuable insights for practical applications.

Organic Electroactive Materials for Aqueous Redox Flow Batteries

Organic electroactive materials take advantage of potentially sustainable production and structural tunability compared to present commercial inorganic materials. Unfortunately, traditional redox flow batteries based on toxic redox-active metal ions have certain deficiencies in resource utilization and environmental protection. In comparison, organic electroactive materials in aqueous redox flow batteries (ARFBs) have received extensive attention in recent years for low-cost and sustainable energy storage systems due to their inherent safety. This review aims to provide the recent progress in organic electroactive materials for ARFBs. The main reaction types of organic electroactive materials are classified in ARFBs to provide an overview of how to regulate their solubility, potential, stability, and viscosity. Then, the organic anolyte and catholyte in ARFBs are summarized according to the types of quinones, viologens, nitroxide radicals, hydroquinones, etc, and how to increase the solubility by designing various functional groups is emphasized. The research advances are presented next in the characterization of organic electroactive materials for ARFBs. Future efforts are finally suggested to focus on building neutral ARFBs, designing advanced electroactive materials through molecular engineering, and resolving problems of commercial applications.

The Implications of Coupling an Electron Transfer Mediated Oxidation with a Proton Coupled Electron Transfer Reduction in Hybrid Water Electrolysis

Electrolysis of water is a sustainable route to produce clean hydrogen. Full water-splitting requires a high applied potential, in part because of the pH-dependency of the H₂ and O₂ evolution reactions (HER and OER), which are proton-coupled electron transfer (PCET) reactions. Therefore, the minimum required potential will not change at different pHs. TEMPO [(2,2,6,6-tetramethyl-1-piperidin-1-yl)oxyl], a stable free-radical that undergoes fast electro-oxidation by a single-electron transfer (ET) process, is pH-independent. Here, we show that the combination of PCET and ET processes enables hydrogen production from water at low cell potentials below the theoretical value for full water-splitting by simple pH adjustment. As a case study, we combined the HER with the oxidation of benzylamine by anodically oxidized TEMPO. The pH-independent electrocatalytic oxidation of TEMPO permits the operation of a hybrid water-splitting cell that shows promise to perform at a low cell potential (≈1 V) and neutral pH conditions.

A Bifunctional Liquid Fuel Cell Coupling Power Generation and V3.5+ Electrolytes Production for All Vanadium Flow Batteries

All vanadium flow batteries (VFBs) are considered one of the most promising large-scale energy storage technology, but restricts by the high manufacturing cost of V^3.5+ electrolytes using the current electrolysis method. Here, a bifunctional liquid fuel cell is designed and proposed to produce V^3.5+ electrolytes and generate power energy by using formic acid as fuels and V⁴⁺ as oxidants. Compared with the traditional electrolysis method, this method not only does not consume additional electric energy, but also can output electric energy. Therefore, the process cost of producing V^3.5+ electrolytes is reduced by 16.3%. This fuel cell has a maximum power of 0.276 mW cm^-2 at an operating current of 1.75 mA cm^-2 . Ultraviolet-visible spectrum and potentiometric titration identify the oxidation state of prepared vanadium electrolytes is 3.48 ± 0.06, close to the ideal 3.5. VFBs with prepared V^3.5+ electrolytes deliver similar energy conversion efficiency and superior capacity retention to that with commercial V^3.5+ electrolytes. This work proposes a simple and practical strategy to prepare V^3.5+ electrolytes.