Morphological Anisotropy in Metal–Organic Framework Micro/Nanostructures

Different FeS Concentrations for Encapsulating ZIF-67 Nanomaterials toward the Enhanced Oxidation Evolution Reaction

Due to the slow kinetic nature of the oxygen evolution reaction (OER), the development of electrocatalysts with high efficiency, stability, and economy for oxygen production using metal-organic framework (MOF) materials is still a challenging research topic. In this work, we chose the different concentrations of FeS adsorption to encapsulate metal cobalt-based ZIF-67 MOF for preparing a series of electrocatalysts (ZIF1FeSx, x = 0.2, 0.5, 0.75, and 1), which were mainly explored for the electrocatalytic OER. Among them, ZIF1FeS0.5 has excellent electrocatalytic activity for OER, which can be driven by low overpotentials of 276 and 349 mV at 10 and 50 mA cm-2 current densities, and more than 92% of the initial overpotential can be maintained after 100 h of continuous OER at 10 mA cm-2 current density. This is mainly due to the electronic interactions between the cobalt-based MOF and the FeS, which shift the electronic state of the active metal center to a higher valence state for increasing the number of active sites and enhancing the efficiency of electron transfer to facilitate the OER course. This work may contribute to the design of effective catalysts for the OER during the electrolysis of alkaline solutions.

MOF-on-MOF Growth: Inducing Naturally Nonpreferred MOFs and Atypical MOF Growth

ConspectusOverflowing metal-organic frameworks (MOFs) have been synthesized from a wide range of metal and organic components for specific purposes and intellectual curiosity. Each MOF has unique chemical and structural characteristics directed by the incorporated components, metal ions (or clusters), organic linkers, and their intrinsic coordination interactions. These incorporated components and structural characteristics are two pivotal factors influencing MOFs' fundamental properties and subsequent applications. Therefore, selecting the appropriate metal and organic components, considering their innate chemical and structural properties, is crucial to endow the final MOFs with the desired properties. Ultimately, producing MOFs with a desired structure using ideal components is the best approach to achieving the best MOFs tailored for specific purposes with desired properties. However, achieving MOFs with the intended structure from chosen components remains underdeveloped. In many cases, the resulting MOF structure is governed by the thermodynamically and/or kinetically preferred configuration (refers to a naturally preferred structure) of the chosen components and given reaction conditions. Additionally, producing hybrid MOFs with complex components, structures, and morphologies presents a great opportunity to obtain special MOFs with advanced properties and functions. In this Account, we outline our group's efforts over the past few years to develop naturally nonpreferred MOFs through the induced MOF-on-MOF growth process and atypical hybrid MOFs via nonstandard MOF-on-MOF growth. First, we highlight the prime strategy for producing naturally nonpreferred MOFs based on template-induced MOF-on-MOF growth. In this section, we discuss the two basic growth behaviors, isotropic and anisotropic growth of naturally nonpreferred MOFs, determined by the degree of matching between the cell lattices of the two MOFs. Second, we introduce the MOF farming concept for the productive cultivation and effective harvesting of naturally nonpreferred MOFs made by MOF-on-MOF growth. Here we discuss the importance of selecting the ideal MOF template for productive growth and developing an efficient method for harvesting cultivated MOFs. Next, we describe atypical anisotropic MOF-on-MOF growths between two MOFs with mismatched cell lattices. In this section, we introduce tip-to-middle MOF-on-MOF growth involving self-structural adjustment of the secondary MOF, logical inference of unidentified MOF structures based on MOF-on-MOF growth behavior and morphological features, and MOF-on-MOF growth accompanied by etching and transformation of the template. Finally, we discuss the perspectives and challenges of MOF-on-MOF growth and the synthesis of naturally nonpreferred MOFs. We hope that this Account offers valuable insights into the rational design and development of MOFs with desired structural and compositional characteristics, leading to the creation of ideal MOFs.

Morphology Engineering of Metal-Organic Frameworks by Facet-Selective Protection and Etching

Anisotropic etching is a novel and effective means to modulate facets of metal-organic frameworks (MOFs) which deserves continuous exploration. Herein, we developed a facet-selective protection and etching method to achieve morphology control of MOFs. Our approach exploits the compositional differences between the facets of zeolitic imidazolate framework-67 and the moderate coordinating and etching properties of ethylenediaminetetraacetic acid disodium salt (EdtaH2Na2). The selected chelator, EdtaH22-, can specifically coordinate with unsaturated metal sites on the {100} crystal planes, protecting them from proton etching and meanwhile releasing protons. Moreover, the released protons with locally high concentration led to the etching of the unprotected {110} facets, ultimately forming nanocrystals with selectively exposed surfaces. This anisotropic etching strategy facilitates the precise modification of MOF surfaces, which is anticipated to play a crucial role in enhancing their properties in different application areas.

Pore-Specific Anisotropic Etching of Zeolitic Imidazolate Frameworks by Carboxylic Acid Vapors

Anisotropic etching is a powerful way to customize metal-organic frameworks with advanced nanostructures, but it is still in its infancy. Herein, we proposed an unprecedented etching strategy that created anisotropic hollow structures in various zeolitic imidazolate framework (ZIF) nano/single crystals via pore-specific carving. The etching occurred through a newly discovered gas-solid reaction where carboxylic acid vapors bind with ligands in ZIFs at room temperature to form ionic liquid (IL). A series of experiments were conducted to decode the origin of anisotropy and the "hollowing out" effect. We found that large pore openings on {111} facets provide access for the entry of carboxylic acid vapors and the outflow of the IL, resulting in pore-dependent anisotropy features. The unique "etching after adsorption" mechanism and the adsorption capacity of the IL enable acid vapors to hollow out nanocrystals and even single crystals. By altering carboxylic acids and ligands in ZIFs, the etching process can be precisely tuned from the inside out or the outside in. This new method demonstrates broad universality and brings unprecedented morphologies and complexities. It may offer great opportunities for achieving purposeful modification of ZIFs and the rational construction of intricate architectures.

Unlocking Single Particle Anisotropy in Real-Time for Photoelectrochemistry Processes at the Nanoscale

The key to rationally and rapidly designing high-performance materials is the monitoring and comprehension of dynamic processes within individual particles in real-time, particularly to gain insight into the anisotropy of nanoparticles. The intrinsic property of nanoparticles typically varies from one crystal facet to the next under realistic working conditions. Here, we introduce the operando collision electrochemistry to resolve the single silver nanoprisms (Ag NPs) anisotropy in photoelectrochemistry. We directly identify the effect of anisotropy on the plasmonic-assisted electrochemistry at the single NP/electrolyte interface. The statistical collision frequency shows that heterogeneous diffusion coefficients among crystal facets facilitate Ag NPs to undergo direction-dependent mass transfer toward the gold ultramicroelectrode. Subsequently, the current amplitudes of transient events indicate that the anisotropy enables variations in dynamic interfacial electron transfer behaviors during photothermal processes. The results presented here demonstrate that the measurement precision of collision electrochemistry can be extended to the sub-nanoparticle level, highlighting the potential for high-throughput material screening with comprehensive kinetics information at the nanoscale.

Radical-Driven Crystal-Amorphous-Crystal Transition of a Metal-Organic Framework

Self-assembly-based structural transition has been explored for various applications, including molecular machines, sensors, and drug delivery. In this study, we developed new redox-active metal-organic frameworks (MOFs) called DGIST-10 series that comprise π-acidic 1,4,5,8-naphthalenediimide (NDI)-based ligands and Ni2+ ions, aiming to boost ligand-self-assembly-driven structural transition and study the involved mechanism. Notably, during the synthesis of the MOFs, a single-crystal-amorphous-single-crystal structural transition occurred within the MOFs upon radical formation, which was ascribed to the fact that radicals prefer spin-pairing or through-space electron delocalization by π-orbital overlap. The radical-formation-induced structural transitions were further confirmed by the postsynthetic solvothermal treatment of isolated nonradical MOF crystals. Notably, the transient amorphous phase without morphological disintegration was clearly observed, contributing to the seminal structural change of the MOF. We believe that this unprecedented structural transition triggered by the ligand self-assembly magnifies the structural flexibility and diversity of MOFs, which is one of the pivotal aspects of MOFs.

Fabrication of well-aligned Co-MOF arrays through a controlled and moderate process for the development of a flexible tetrabromobisphenol A sensor

Tetrabromobisphenol A (TBBPA) has attracted a great deal of attention due to its side effects and potential bioaccumulation properties. It is of great importance to construct and develop novel electrochemical sensors for the sensitive and selective detection of TBBPA. In the present study, cobalt (Co) based metal-organic frameworks (MOFs) were synthesized on carbon cloth (CC) by using cobalt nitrate hexahydrate and 2-methylimidazole. The morphological characterization was carried out by transmission electron microscopy (TEM), scanning electron microscopy (SEM), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS) and Fourier transform infrared spectroscopy (FTIR). The results showed that Co-MOFs/CC have a leaf-like structure and abundant surface functional groups. The electrochemical properties of the sensor were investigated by differential pulse voltammetry (DPV). The effects of different ratios of metal ions to organic ligands, reaction temperature, time, concentration, pH value of the electrolyte, and incubation time on the oxidation peak current of TBBPA were studied. Under the optimal conditions, the linear range of the designed sensor was 0.1 μM-100 μM, and the limit of detection was 40 nM. The proposed sensor is simple, of low cost and efficient, which can greatly facilitate the detection tasks of environmental monitoring workers.