Organic Zinc-Ion Battery: Planar, π-Conjugated Quinone-Based Polymer Endows Ultrafast Ion Diffusion Kinetics

Hydrophobic Two-Dimensional Layered Superstructure of a Polyoxometalate Cluster as the Cathode Material for Aqueous Zinc-Ion Batteries

Aqueous zinc-ion batteries hold promise for sustainable energy storage, yet challenges in finding high-performance cathode materials persist. Polyoxovanadates (POVs) are emerging as potential candidates due to their structural diversity and robust redox activity. Despite their potential, issues like dissolution in electrolytes, structural degradation, and byproduct accumulation persist. This work introduces a POV-based hydrophobic two-dimensional (2D) layered superstructure that addresses these challenges. The hydrophobic nature minimizes POV dissolution, enhancing structural stability and inhibiting phase transitions during cycling. The 2D arrangement ensures a larger surface area and improved electronic conductivity, resulting in faster kinetics and higher specific capacity. The superstructure demonstrates improved cycle life and an increased operating voltage, marking a significant advancement in POV-based cathode materials for aqueous zinc-ion batteries.

Regulating Protons to Tailor the Enol Conversion of Quinone for High-Performance Aqueous Zinc Batteries

Quinone-based electrodes using carbonyl redox reactions are promising candidates for aqueous energy storage due to their high theoretical specific capacity and high-rate performance. However, the proton storage manners and their influences on the electrochemical performance of quinone are still not clear. Herein, we reveal that proton storage could determine the products of the enol conversion and the electrochemical stability of the organic electrode. Specifically, the protons preferentially coordinated with the prototypical pyrene-4,5,9,10-tetraone (PTO) cathode, and increasing the proton concentration in the electrolyte can improve its working potentials and cycling stability by tailoring the enol conversion reaction. We also found that exploiting Al2(SO4)3 as a pH buffer can increase the energy density of the Zn||PTO batteries from 242.8 to 284.6 Wh kg-1. Our research has a guiding significance for emphasizing proton storage of organic electrodes based on enol conversion reactions and improving their electrochemical performance.

Zigzag Hopping Site Embedded Covalent Organic Frameworks Coating for Zn Anode

Precise design and tuning of Zn hopping/transfer sites with deeper understanding of the dendrite-formation mechanism is vital in artificial anode protective coating for aqueous Zn-ion batteries (AZIBs). Here, we probe into the role of anode-coating interfaces by designing a series of anhydride-based covalent organic frameworks (i.e., PI-DP-COF and PI-DT-COF) with specifically designed zigzag hopping sites and zincophilic anhydride groups that can serve as desired platforms to investigate the related Zn2+ hopping/transfer behaviours as well as the interfacial interaction. Combining theoretical calculations with experiments, the ABC stacking models of these COFs endow the structures with specific zigzag sites along the 1D channel that can accelerate Zn2+ transfer kinetics, lower surface-energy, homogenize ion-distribution or electric-filed. Attributed to these superiorities, thus-obtained optimal PI-DT-COF cells offer excellent cycling lifespan in both symmetric-cell (2000 cycles at 60 mA cm-2) and full-cell (1600 cycles at 2 A g-1), outperforming almost all the reported porous crystalline materials.

Tailoring Versatile Cathodes and Induced Anodes for Zn-Se Batteries: Anisotropic Orientation of Tin-Based Materials within Bowl-In-Ball Carbon

The advancement of Zn-Se batteries has been hindered by significant challenges, such as the sluggish kinetics of Se cathodes, limited Se loading, and uncontrollable formation of Zn dendrites. In this study, a bidirectional optimization strategy is devised for both cathode and anode to bolster the performance of Zn-Se batteries. A novel bowl-in-ball structured carbon (BIBCs) material is synthesized to serve as a nanoreactor, in which tin-based materials are grown and derived in situ to construct cathodes and anodes. Within the cathode, the multifunctional host material (SnSe@BIBCs) exhibits large adsorption capacity for selenium, and demonstrates supreme catalytic properties and spatially confined characteristics toward the selenium reduction reaction (SeRR). On the anode, Sn@BIBCs displays triple-induced properties, including the zincophilic of the internal metallic Sn, the homogenized spatial electric field from the 3D spatial structure, and the curvature effect of the bowl-shaped carbon. Collectively, these factors induce preferential nucleation of Zn, ensuring its uniform deposition. As a result, the integrated Zn-Se battery system achieves a remarkable specific capacity of up to 603 mAh g-1 and an impressive energy density of 581 W kg-1, highlighting its tremendous potential for practical applications.

Structure regulation and synchrotron radiation investigation of cathode materials for aqueous Zn-ion batteries

In view of the advantages of low cost, environmental sustainability, and high safety, aqueous Zn-ion batteries (AZIBs) are widely expected to hold significant promise and increasingly infiltrate various applications in the near future. The development of AZIBs closely relates to the properties of cathode materials, which depend on their structures and corresponding dynamic evolution processes. Synchrotron radiation light sources, with their rich advanced experimental methods, serve as a comprehensive characterization platform capable of elucidating the intricate microstructure of cathode materials for AZIBs. In this review, we initially examine available cathode materials and discuss effective strategies for structural regulation to boost the storage capability of Zn2+. We then explore the synchrotron radiation techniques for investigating the microstructure of the designed materials, particularly through in situ synchrotron radiation techniques that can track the dynamic evolution process of the structures. Finally, the summary and future prospects for the further development of cathode materials of AZIBs and advanced synchrotron radiation techniques are discussed.

Ferrocene Appended Porphyrin-Based Bipolar Electrode Material for High-Performance Energy Storage

The versatile properties of bipolar organic electrode materials have attracted considerable attention in the field of electrochemical energy storage (EES). However, their practical application is hindered by their inherent limitations including low intrinsic electrical conductivity, low specific capacity, and high solubility. Herein, a bipolar organic molecule combining both porphyrin and ferrocene moieties (CuDEFcP) [5,15-bis(ethynyl)-10,20-di ferrocenyl porphinato]copper(II)) has been developed. It is proposed as a new organic electrode material with multifunctional application for rechargeable organic lithium-based batteries (ROLBs) and dual-ion organic symmetric batteries (SDIBs). Superior performance was delivered as cathode material in lithium based dual-ion batteries (LDIBs), with a high initial discharge capacity of 300 mAh. g-1 at 0.2 A. g-1 and a reversible capacity of 58 mAh. g-1 after 5000 cycles at 1 A. g-1. However, employing it as an anode material in lithium-ion batteries (LIBs), a reversible capacity of 295 mAh. g-1 at 0.2 A. g-1 was delivered. In SDIBs, in which CuDEFcP is used as both anode and cathode, an average discharge voltage of 2.4 V and an energy density of 261 Wh.kg-1 were achieved.

Unveiling Organic Electrode Materials in Aqueous Zinc-Ion Batteries: From Structural Design to Electrochemical Performance

Aqueous zinc-ion batteries (AZIBs) are one of the most compelling alternatives of lithium-ion batteries due to their inherent safety and economics viability. In response to the growing demand for green and sustainable energy storage solutions, organic electrodes with the scalability from inexpensive starting materials and potential for biodegradation after use have become a prominent choice for AZIBs. Despite gratifying progresses of organic molecules with electrochemical performance in AZIBs, the research is still in infancy and hampered by certain issues due to the underlying complex electrochemistry. Strategies for designing organic electrode materials for AZIBs with high specific capacity and long cycling life are discussed in detail in this review. Specifically, we put emphasis on the unique electrochemistry of different redox-active structures to provide in-depth understanding of their working mechanisms. In addition, we highlight the importance of molecular size/dimension regarding their profound impact on electrochemical performances. Finally, challenges and perspectives are discussed from the developing point of view for future AZIBs. We hope to provide a valuable evaluation on organic electrode materials for AZIBs in our context and give inspiration for the rational design of high-performance AZIBs.

Non-Metal Ion Storage in Zinc-Organic Batteries

Zinc-organic batteries (ZOBs) are receiving widespread attention as up-and-coming energy-storage systems due to their sustainability, operational safety and low cost. Charge carrier is one of the critical factors affecting the redox kinetics and electrochemical performances of ZOBs. Compared with conventional large-sized and sluggish Zn2+ storage, non-metallic charge carriers with small hydrated size and light weight show accelerated interfacial dehydration and fast reaction kinetics, enabling superior electrochemical metrics for ZOBs. Thus, it is valuable and ongoing works to build better ZOBs with non-metallic ion storage. In this review, versatile non-metallic cationic (H+, NH4 +) and anionic (Cl-, OH-, CF3SO3 -, SO4 2-) charge carriers of ZOBs are first categorized with a brief comparison of their respective physicochemical properties and chemical interactions with redox-active organic materials. Furthermore, this work highlights the implementation effectiveness of non-metallic ions in ZOBs, giving insights into the impact of ion types on the metrics (capacity, rate capability, operation voltage, and cycle life) of organic cathodes. Finally, the challenges and perspectives of non-metal-ion-based ZOBs are outlined to guild the future development of next-generation energy communities.

Converting Commercial Zn Foils into Single (002)-Textured Zn with Millimeter-Sized Grains for Highly Reversible Aqueous Zinc Batteries

Rechargeable aqueous zinc batteries are promising but hindered by unfavorable dendrite growth and side reactions on zinc anodes. In this study, we demonstrate a fast melting-solidification approach for effectively converting commercial Zn foils into single (002)-textured Zn featuring millimeter-sized grains. The melting process eliminates initial texture, residual stress, and grain size variations in diverse commercial Zn foils, guaranteeing the uniformity of commercial Zn foils into single (002)-textured Zn. The single (002)-texture ensures large-scale epitaxial and dense Zn deposition, while the reduction in grain boundaries significantly minimizes intergranular reactions. These features enable large grain single (002)-textured Zn shows planar and dense Zn deposition under harsh conditions (100 mA cm-2, 100 mAh cm-2), impressive reversibility in Zn||Zn symmetric cell (3280 h under 1 mA cm-2, 830 h under 10 mAh cm-2), and long cycling stability over 180 h with a high depth of discharge value of 75 %. This study successfully addresses the issue of uncontrollable texture formation in Zn foils following routine annealing treatments with temperatures below the Zn melting point. The findings of this study establish a highly efficient strategy for fabricating highly reversible single (002)-textured Zn anodes.

Multielectron Redox-Bipolar Tetranitroporphyrin Macrocycle Cathode for High-Performance Zinc-Organic Batteries

Bipolar organics fuse the merits of n/p-type redox reactions for better Zn-organic batteries (ZOBs), but face the capacity plafond due to low density of active units and single-electron reactions. Here we report multielectron redox-bipolar tetranitroporphyrin (TNP) with quadruple two-electron-accepting n-type nitro motifs and dual-electron-donating p-type amine moieties towards high-capacity-voltage ZOBs. TNP cathode initiates high-kinetics, hybrid anion-cation 10e- charge storage involving four nitro sites coordinating with Zn2+ ions at low potential and two amine species coupling with SO4 2- ions at high potential. Consequently, Zn||TNP battery harvests high capacity (338 mAh g-1), boosted average voltage (1.08 V), and outstanding energy density (365 Wh kg-1 TNP). Moreover, the extended π-conjugated TNP macrocycle achieves anti-dissolution in electrolytes, prolonging the battery life to 50,000 cycles at 10 A g-1 with 71.6 % capacity retention. This work expands the chemical landscape of multielectron redox-bipolar organics for state-of-the-art ZOBs.

Water Catchers within Sub-Nano Channels Promote Step-by-Step Zinc-Ion Dehydration Enable Highly Efficient Aqueous Zinc-Metal Batteries

Zinc metal suffers from violent and long-lasting water-induced side reactions and uncontrollable dendritic Zn growth, which seriously reduce the coulombic efficiency (CE) and lifespan of aqueous zinc-metal batteries (AZMBs). To suppress the corresponding harmful effects of the highly active water, a stable zirconium-based metal-organic framework with water catchers decorated inside its sub-nano channels is used to protect Zn-metal. Water catchers within narrow channels can constantly trap water molecules from the solvated Zn-ions and facilitate step-by-step desolvation/dehydration, thereby promoting the formation of an aggregative electrolyte configuration, which consequently eliminates water-induced corrosion and side reactions. More importantly, the functionalized sub-nano channels also act as ion rectifiers and promote fast but even Zn-ions transport, thereby leading to a dendrite-free Zn metal. As a result, the protected Zn metal demonstrates an unprecedented cycling stability of more than 10 000 h and an ultra-high average CE of 99.92% during 4000 cycles. More inspiringly, a practical NH4V4O10//Zn pouch-cell is fabricated and delivers a capacity of 98 mAh (under high cathode mass loading of 25.7 mg cm-2) and preserves 86.2% capacity retention after 150 cycles. This new strategy in promoting highly reversible Zn metal anodes would spur the practical utilization of AZMBs.

Facilitating the Electrochemical Oxidation of ZnS through Iodide Catalysis for Aqueous Zinc-Sulfur Batteries

Aqueous zinc-sulfur (Zn-S) batteries show great potential for unlocking high energy and safety aqueous batteries. Yet, the sluggish kinetic and poor redox reversibility of the sulfur conversion reaction in aqueous solution challenge the development of Zn-S batteries. Here, we fabricate a high-performance Zn-S battery using highly water-soluble ZnI2 as an effective catalyst. In situ experimental characterizations and theoretical calculations reveal that the strong interaction between I- and the ZnS nanoparticles (discharge product) leads to the atomic rearrangement of ZnS, weakening the Zn-S bonding, and thus facilitating the electrochemical oxidation reaction of ZnS to S. The aqueous Zn-S battery exhibited a high energy density of 742 Wh kg(sulfur) -1 at the power density of 210.8 W kg(sulfur) -1 and good cycling stability over 550 cycles. Our findings provide new insights about the iodide catalytic effect for cathode conversion reaction in Zn-S batteries, which is conducive to promoting the future development of high-performance aqueous batteries.

Electrolyte Optimization Strategy: Enabling Stable and Eco-Friendly Zinc Adaptive Interfacial Layer in Zinc Ion Batteries

Aqueous zinc ion batteries (AZIBs) have emerged as a promising battery technology due to their excellent safety, high capacity, low cost, and eco-friendliness. However, the cycle life of AZIBs is limited by severe side reactions and zinc dendrite growth on the zinc electrode surface, hindering large-scale application. Here, an electrolyte optimization strategy utilizing the simplest dipeptide glycylglycine (Gly-Gly) additive is first proposed. Theoretical calculations and spectral analysis revealed that, due to the strong interaction between the amino group and Zn atoms, Gly-Gly preferentially adsorbs on zinc's surface, constructing a stable and adaptive interfacial layer that inhibits zinc side reactions and dendrite growth. Furthermore, Gly-Gly can regulate zinc ion solvation, leading to a deposition mode shift from dendritic to lamellar and limiting two-dimensional dendrite diffusion. The symmetric cell with the addition of a 20 g/L Gly-Gly additive exhibits a cycle life of up to 1100 h. Under a high current density of 10 mA cm-2, a cycle life of 750 cycles further demonstrates the reliable adaptability of the interfacial layer. This work highlights the potential of Gly-Gly as a promising solution for improving the performance of AZIBs.

Organic Cathodes, a Path toward Future Sustainable Batteries: Mirage or Realistic Future?

Organic active materials are seen as next-generation battery materials that could circumvent the sustainability and cost limitations connected with the current Li-ion battery technology while at the same time enabling novel battery functionalities like a bioderived feedstock, biodegradability, and mechanical flexibility. Many promising research results have recently been published. However, the reproducibility and comparison of the literature results are somehow limited due to highly variable electrode formulations and electrochemical testing conditions. In this Perspective, we provide a critical view of the organic cathode active materials and suggest future guidelines for electrochemical characterization, capacity evaluation, and mechanistic investigation to facilitate reproducibility and benchmarking of literature results, leading to the accelerated development of organic electrode active materials for practical applications.

Accelerating the Phosphatase-like Activity of Uio-66-NH2 by Catalytically Inactive Metal Ions and Its Application for Improved Fluorescence Detection of Cardiac Troponin I

Compared with natural enzymes, nanozymes usually exhibit much lower catalytic activities, which limit the sensitivities of nanozyme-based immunoassays. Herein, several metal ions without enzyme-like activities were engineered onto Uio-66-NH2 nanozyme through postsynthetic modification. The obtained Mn+@Uio-66-NH2 (Mn+ = Zn2+, Cd2+, Co2+, Ca2+and Ni2+) exhibited improved phosphatase-like catalytic activities. In particular, a 12-fold increase in the catalytic efficiency (kcat/Km) of Uio-66-NH2 was observed after the modification with Zn2+. Mechanism investigations indicate that both the amino groups and oxygen-containing functional groups in Uio-66-NH2 are the binding sites of Zn2+, and the modified Zn2+ ions on Uio-66-NH2 serve as the additional catalytic sites for improving the catalytic performance. Furthermore, the highly active Zn2+@Uio-66-NH2 was used as a nanozyme label to develop a fluorescence immunoassay method for the detection of cardiac troponin I (cTnI). Compared with pristine Uio-66-NH2, Zn2+@Uio-66-NH2 can widen the linear range by 1 order of magnitude (from 10 pg/mL-1 μg/mL to 1 pg/mL-1 μg/mL) and also lower the detection limit by 5 times (from 4.7 pg/mL to 0.9 pg/mL).

Spatial Structure Design of Thioether-Linked Naphthoquinone Cathodes for High-Performance Aqueous Zinc-Organic Batteries

Organic electrode materials (OEMs) have gathered extensive attention for aqueous zinc-ion batteries (AZIBs) due to their structural diversity and molecular designability. However, the reported research mainly focuses on the design of the planar configuration of OEMs and does not take into account the important influence of the spatial structure on the electrochemical properties, which seriously hamper the further performance liberation of OEMs. Herein, this work has designed a series of thioether-linked naphthoquinone-derived isomers with tunable spatial structures and applied them as the cathodes in AZIBs. The incomplete conjugated structure of the elaborately engineered isomers can guarantee the independence of the redox reaction of active groups, which contributes to the full utilization of active sites and high redox reversibility. In addition, the position isomerization of naphthoquinones on the benzene rings changes the zincophilic activity and redox kinetics of the isomers, signifying the importance of spatial structure on the electrochemical performance. As a result, the 2,2'-(1,4-phenylenedithio) bis(1,4-naphthoquinone) (p-PNQ) with the smallest steric hindrance and the most independent redox of active sites exhibits a high specific capacity (279 mAh g-1 ), an outstanding rate capability (167 mAh g-1 at 100 A g-1 ), and a long-term cycling lifetime (over 2800 h at 0.05 A g-1 ).

Boosting H+ Storage in Aqueous Zinc Ion Batteries via Integrating Redox-Active Sites into Hydrogen-Bonded Organic Frameworks with Strong π-π Stacking

In the emerging aqueous zinc ion batteries (AZIBs), proton (H+ ) with the smallest molar mass and fast (de)coordination kinetics is considered as the most ideal charge carrier compared with Zn2+ counterpart, however, searching for new hosting materials for H+ storage is still at its infancy. Herein, redox-active hydrogen-bonded organic frameworks (HOFs) assembled from diaminotriazine moiety decorated hexaazatrinnphthalene (HOF-HATN) are for the first time developed as the stable cathode hosting material for boosting H+ storage in AZIBs. The unique integration of hydrogen-bonding networks and strong π-π stacking endow it rapid Grotthuss proton conduction, stable supramolecular structure and inclined H+ storage. As a consequence, HOF-HATN displays a high capacity (320 mAh g-1 at 0.05 A g-1 ) and robust cyclability of (>10000 cycles at 5 A g-1 ) based on three-step cation coordination storage. These findings get insight into the proton transport and storage behavior in HOFs and provide the molecular engineering strategy for constructing well-defined cathode hosting materials for rechargeable aqueous batteries.

Non-Metallic NH4 + /H+ Co-Storage in Organic Superstructures for Ultra-Fast and Long-Life Zinc-Organic Batteries

Compared with Zn2+ storage, non-metallic charge carrier with small hydrated size and light weight shows fast dehydration and diffusion kinetics for Zn-organic batteries. Here we first report NH4 + /H+ co-storage in self-assembled organic superstructures (OSs) by intermolecular interactions of p-benzoquinone (BQ) and 2, 6-diaminoanthraquinone (DQ) polymer through H-bonding and π-π stacking. BQ-DQ OSs exhibit exposed quadruple-active carbonyl motifs and super electron delocalization routes, which are redox-exclusively coupled with high-kinetics NH4 + /H+ but exclude sluggish and rigid Zn2+ ions. A unique 4e- NH4 + /H+ co-coordination mechanism is unravelled, giving BQ-DQ cathode high capacity (299 mAh g-1 at 1 A g-1 ), large-current tolerance (100 A g-1 ) and ultralong life (50,000 cycles). This strategy further boosts the capacity to 358 mAh g-1 by modulating redox-active building units, giving new insights into ultra-fast and stable NH4 + /H+ storage in organic materials for better Zn batteries.

Dendritic sp Carbon-Conjugated Benzothiadiazole-Based Polymers with Synergistic Multi-Active Groups for High-Performance Lithium Organic Batteries

Green organic materials composed of C, H, O, and N elements are receiving more and more attention worldwide. However, the high solubility, poor electrical conductivity, and long activation time limit the development of organic materials in practice. Herein, two stable covalent organic materials with alkynyl linkage between benzene rings and benzothiadiazole groups with different amounts of fluorine atoms modification (defined as BOP-0F and BOP-2F), are designed for lithium-ion batteries. Both BOP-0F and BOP-2F can achieve superior reversible capacities of ≈719.8 and 713.5 mAh g-1 over 100 cycles on account of the redox activity of alkynyl (two-electron involved) and benzothiadiazole units (five-electron involved) in these organic materials. While BOP-2F electrodes exhibit much more stable cycling performance than BOP-0F electrodes, especially without pronounced capacity ascending during initial cycling. It can be assigned to the synergy effect of alkynyl linkage and fluorine atom modification in BOP-2F. The lithium storage and activation mechanism of alkynyl, benzothiadiazole, and fluorine groups have also been deeply probed by a series of material characterizations and theoretical simulations. This work could be noteworthy in providing novel tactics for the molecular design and investigation of high-efficiency organic electrodes for energy storage.

Nonplanar π-Conjugated Sulfur Heterocyclic Quinone Polymer Cathode for Air-Rechargeable Zinc/Organic Battery with Simultaneously Boosted Output Voltage, Rate Capability, and Cycling Life

π-conjugated organic compounds with a good charge transfer ability and rich redox functional groups are promising cathode candidates for air-rechargeable aqueous Zn-based batteries (AAZBs). However, the output voltage of even the state-of-the-art π-conjugated organic cathodes lies well below 0.8 V, resulting in insufficient energy density. Herein, we design a nonplanar π-conjugated sulfur heterocyclic quinone polymer (SHQP) as an advanced cathode material for AAZBs by polymerization 1,4-Benzoquinone (BQ) and S heteroatoms periodically. The extended π-conjugated plane and enhanced aromaticity endow SHQP with a more sensitive charge transfer ability and robust structure. Furthermore, the delocalized π electrons in the whole system are insufficient as the π orbit of the S heteroatom is not in the same plane with the π orbit of BQ due to its folded configuration, resulting in negligible variation of electron density around C═O after the polymerization. Thus, the output voltage of SHQP shows no significant decrease even though the thioether bond (-S-) functions as electron donor. Consequently, the Zn/SHQP AAZBs can deliver a record high midpoint discharging voltage (0.95 V), rate performance (119 mAh g-1 at 10 A g-1), and durability (98.7% capacity retention after 200 cycles) across a wide temperature range.

Recent Progress of the Cathode Material Design for Aqueous Zn-Organic Batteries

Aqueous zinc-ion batteries (ZIBs) have emerged as the most promising candidate for large-scale energy storage due to their inherent safety, environmental friendliness, and cost-effectiveness. Simultaneously, the utilization of organic electrode materials with renewable resources, environmental compatibility, and diverse structures has sparked a surge in research and development of aqueous Zn-organic batteries (ZOBs). A comprehensive review is warranted to systematically present recent advancements in design principles, synthesis techniques, energy storage mechanisms, and zinc-ion storage performance of organic cathodes. In this review article, we comprehensively summarize the energy storage mechanisms employed by aqueous ZOBs. Subsequently, we categorize organic cathode materials into small-molecule compounds and high-molecular polymers respectively. Novel polymer materials such as conjugated polymers (CPs), conjugated microporous polymers (CMPs), and covalent organic frameworks (COFs) are highlighted with an overview of molecular design strategies and structural optimization based on organic cathode materials aimed at enhancing the performance of aqueous ZOBs. Finally, we discuss the challenges faced by aqueous ZOBs along with future prospects to offer insights into their practical applications.

Synergetic Coupling of Redox-Active Sites on Organic Electrode Material for Robust and High-Performance Sodium-Ion Storage

Organic electrode materials (OEMs), valued for their sustainability and structural tunability, have been attracting increasing attention for wide application in sodium-ion batteries (SIBs) and other rechargeable batteries. However, most OEMs are plagued with insufficient specific capacity or poor cycling stability. Therefore, it's imperative to enhance their specific capacity and cycling stability through molecular design. Herein, we designed and synthesized a heteroaromatic molecule 2,3,8,9,14,15-hexanol hexaazatrinaphthalene (HATN-6OH) by the synergetic coupling of catechol (the precursor of ortho-quinone)/ortho-quinone functional groups and HATN conjugated core structures. The abundance of catechol/ortho-quinone and imine redox-active moieties delivers a high specific capacity of nine-electron transfer for SIBs. Most notably, the π-π interactions and intermolecular hydrogen bond forces among HATN-6OH molecules secure the stable long-term cycling performance of SIBs. Consequently, the as-prepared HATN-6OH electrode exhibited a high specific capacity (554 mAh g-1 at 0.1 A g-1 ), excellent rate capability (202 mAh g-1 at 10 A g-1 ), and stable long-term cycling performance (73 % after 3000 cycles at 10 A g-1 ) in SIBs. Additionally, the nine-electron transfer mechanism is confirmed by systematic density functional theory (DFT) calculation, attenuated total reflection Fourier transform infrared spectroscopy (ATR-FTIR), and Raman analysis. The achievement of the synergetic coupling of the redox-active sites on OEMs could be an important key to the enhancement of SIBs and other metal-ion batteries.

Aromatic Organic Small-Molecule Material with (020) Crystal Plane Activation for Wide-Temperature and 68000 Cycle Aqueous Calcium-Ion Batteries

Calcium-ion batteries are an emerging energy storage device owing to the low redox potential of Ca2+/Ca and the naturally abundant reserves of the Ca element. However, the high charge density and large radius of Ca2+ lead to a low calcium storage capacity or unsatisfactory cycling performance for most electrode materials. Herein, we report the organic crystal 3,4,9,10-perylenetetracarboxylic diimide (PTCDI) as an anode material for aqueous calcium-ion batteries (ACIBs) in a water-in-salt electrolyte. PTCDI delivers a high discharge capacity of 131.8 mAh g-1, excellent rate performance (86.2 mAh g-1@10000 mA g-1), and an ultralong life of 68000 cycles (over 470 days) with a high capacity retention of 72.7%. The calcium storage mechanism of PTCDI is shown to be an enolization reaction by in situ attenuated total reflectance Fourier-transform infrared and ex situ X-ray photoelectron spectroscopy. The activation mechanism of PTCDI microribbon splitting along the (020) crystal plane is studied by in situ X-ray diffraction, 3D tomography reconstruction technologies, and ex situ transmission electron microscopy. In addition, the Ca2+ storage sites and diffusion pathways of PTCDI are studied by density functional theory calculations. Finally, by matching a high-voltage Prussian blue analogue cathode, the assembled aqueous calcium-ion full cells exhibit excellent wide-temperature operating capability (-20 to +50 °C) and an ultralong life of 30000 cycles. Further, an aqueous calcium-ion pouch cell is constructed and exhibits a long lifetime of over 500 cycles.

Quinone-amine polymer nanospheres with enhanced redox activity for aqueous proton storage

One of the biggest obstacles to the development of aqueous proton batteries (APBs), despite numerous optimization techniques, is the preparation and use of high-performance electrode materials. In this work, to improve the high solubility, limited capacity and poor cycle life of small organic molecules in APBs, homogeneous dispersed quinone-amine polymer nanospheres (PQANS) (average diameter: 220 nm) were synthesized by a polymerization reaction based on 3,3'-diaminobenzidine (DAB) and benzoquinone (BQ), making them suitable for proton storage in aqueous systems. As an anode for APBs, the obtained PQANS exhibits an improved reversible capacity of 126.2 mAh/g at 1 A/g after 300 cycles. The durable stable measurement of PQANS at 10 A/g was also conducted with a specific capacity of 66.8 mAh/g after 12,000 cycles. A series of in situ or ex situ measurements were used to establish the superior H+ storage mechanism of PQANS. A novel reaction mechanism of redox enhancement was revealed due to the existence of more carbonyl groups after the first cycle. Theoretical calculations were conducted to help illustrate the principle of binding protons with functional groups in PQANS. Finally, a PQANS anode-based aqueous proton full battery was constructed to demonstrate its potential application, which exhibits a specific capacity of 50.6 mAh/g at 1 A/g (600 cycles). This work provides a reference for preparing high-performance polymer-based electrode materials in aqueous batteries.

An imine-rich polymer with enlarged π-conjugated planes for aqueous zinc-ion batteries

Two imine-rich polymers (planar P3Q and linear TDB) were synthesized through a facile method. P3Q demonstrates an enlarged π-conjugated structure, increasing the coordination and conversion of Zn2+. As a result, for aqueous zinc-ion batteries, P3Q exhibits more excellent electrochemical performance than TDB with a discharge capacity of 226 mA h g-1 at 0.3 A g-1 and relatively high capacity retention of 70% after 100 cycles at 0.5 A g-1. The redox energy storage mechanism is also explored by ex situ characterization and density functional theory calculation.

NH4 + Charge Carrier Coordinated H-Bonded Organic Small Molecule for Fast and Superstable Rechargeable Zinc Batteries

Organic small molecules as high-capacity cathodes for Zn-organic batteries have inspired numerous interests, but are trapped by their easy-dissolution in electrolytes. Here we knit ultrastable lock-and-key hydrogen-bonding networks between 2, 7-dinitropyrene-4, 5, 9, 10-tetraone (DNPT) and NH4 + charge carrier. DNPT with octuple-active carbonyl/nitro centers (H-bond acceptor) are redox-exclusively accessible for flexible tetrahedral NH4 + ions (H-bond donator) but exclude larger and rigid Zn2+ , due to a lower activation energy (0.14 vs. 0.31 eV). NH4 + coordinated H-bonding chemistry conquers the stability barrier of DNPT in electrolyte, and gives fast diffusion kinetics of non-metallic charge carrier. A stable two-step 4e- NH4 + coordination with DNPT cathode harvests a high capacity (320 mAh g-1 ), a high-rate capability (50 A g-1 ) and an ultralong life (60,000 cycles). This finding points to a new paradigm for H-bond stabilized organic small molecules to design advanced zinc batteries.

Highly Stable Aqueous Zinc Metal Batteries Enabled by an Ultrathin Crack-Free Hydrophobic Layer with Rigid Sub-Nanochannels

Aqueous zinc-metal batteries (AZMBs) have received tremendous attentions due to their high safety, low cost, environmental friendliness, and simple process. However, zinc-metal still suffer from uncontrollable dendrite growth and surface parasitic reactions that reduce the Coulombic efficiency (CE) and lifetime of AZMBs. These problems which are closely related to the active water are not well-solved. Here, an ultrathin crack-free metal-organic framework (ZIF-7x -8) with rigid sub-nanopore (0.3 nm) is constructed on Zn-metal to promote the de-solvation of zinc-ions before approaching Zn-metal surface, reduce the contacting opportunity between water and Zn, and consequently eliminate water-induced corrosion and side-reactions. Due to the presence of rigid and ordered sub-nanochannels, Zn-ions deposits on Zn-metal follow a highly ordered manner, resulting in a dendrite-free Zn-metal with negligible by-products, which significantly improve the reversibility and lifespan of Zn-metals. As a result, Zn-metal protected by ultrathin crack-free ZIF-7x -8 layer exhibits excellent cycling stability (over 2200 h) and extremely-high 99.96% CE during 6000 cycles. The aqueous PANI-V2 O5 //ZIF-7x -8@Zn full-cell preserves 86% high-capacity retention even after ultra-long 2000 cycles. The practical pouch-cell can also be cycled for more than 120 cycles. It is believed that the simple strategy demonstrated in this work can accelerate the practical utilizations of AZMBs.

In Situ Electrochemical Activation of Hydroxyl Polymer Cathode for High-Performance Aqueous Zinc-Organic Batteries

The slow reaction kinetics and structural instability of organic electrode materials limit the further performance improvement of aqueous zinc-organic batteries. Herein, we have synthesized a Z-folded hydroxyl polymer polytetrafluorohydroquinone (PTFHQ) with inert hydroxyl groups that could be partially oxidized to the active carbonyl groups through the in situ activation process and then undertake the storage/release of Zn2+ . In the activated PTFHQ, the hydroxyl groups and S atoms enlarge the electronegativity region near the electrochemically active carbonyl groups, enhancing their electrochemical activity. Simultaneously, the residual hydroxyl groups could act as hydrophilic groups to enhance the electrolyte wettability while ensuring the stability of the polymer chain in the electrolyte. Also, the Z-folded structure of PTFHQ plays an important role in reversible binding with Zn2+ and fast ion diffusion. All these benefits make the activated PTFHQ exhibit a high specific capacity of 215 mAh g-1 at 0.1 A g-1 , over 3400 stable cycles with a capacity retention of 92 %, and an outstanding rate capability of 196 mAh g-1 at 20 A g-1 .

Hydrogen Bond Networks Stabilized High-Capacity Organic Cathode for Lithium-Ion Batteries

High-capacity small organic materials are plagued by their high solubility. Here we proposed constructing hydrogen bond networks (HBN) via intermolecular hydrogen bonds to suppress the solubility of active material. The illustrated 2, 7- diamino-4, 5, 9, 10-tetraone (PTO-NH₂ ) molecule with intermolecular hydrogen (H) bond between O in -C=O and H in -NH₂ , which make PTO-NH₂ presents transverse two-dimensional extension and longitudinal π-π stacking structure. In situ Fourier transform infrared spectroscopy (FTIR) has tracked the reversible evolution of H-bonds, further confirming the existence of HBN structure can stabilize the intermediate 2-electron reaction state. Therefore, PTO-NH₂ with HBN structure has higher active site utilization (95 %), better cycle stability and rate performance. This study uncovers the H-bond effect and evolution during the electrochemical process and provides a strategy for materials design.