Durable Lithium Metal Anodes Enabled by Interfacial Layers Based on Mechanically Interlocked Networks Capable of Energy Dissipation

Hyperbranched Vitrimer for Ultrahigh Energy Dissipation

Polymers are ideally utilized as damping materials due to the high internal friction of molecular chains, enabling effective suppression of vibrations and noises in various fields. Current strategies rely on broadening the glass transition region or introducing additional relaxation components to enhance the energy dissipation capacity of polymeric damping materials. However, it remains a significant challenge to achieve high damping efficiency through structural control while maintaining dynamic characteristics. In this work, we propose a new strategy to develop hyperbranched vitrimers (HBVs) containing dense pendant chains and loose dynamic crosslinked networks. A novel yet weak dynamic transesterification between the carboxyl and boronic acid ester was confirmed and used to prepare HBVs based on poly (hexyl methacrylate-2-(4-ethenylphenyl)-5,5-dimethyl-1,3,2-dioxaborinane) P(HMA-co-ViCL) copolymers. TheA B n ${{AB}_{n}}$ -type of macromonomers, the crosslinking points formed by the dynamic covalent connection via the associative exchange, and the weak yet dynamic exchange reaction are the three keys to developing high-performance HBV damping materials. We found that P(HMA-co-ViCL) 20k-40-60 HBV exhibited ultrahigh energy-dissipation performance over a broad frequency and temperature range, attributed to the synergistic effect of dense pendant chains and weak dynamic covalent crosslinks. This unique design concept will provide a general approach to developing advanced damping materials.

Interfacial Layers with Desolvation Function Induced Stable Deposition of Lithium Metal for Long-Cycling Lithium Metal Batteries

The unstable solid electrolyte interface (SEI) formed by uncontrollable electrolyte degradation, which leads to dendrite growth and Coulombic efficiency decay, hinders the development of Li metal anodes. A controllable desolvation process is essential for the formation of stable SEI and improved lithium metal deposition behavior. Here, we show a functional artificial interface protective layer comprised of chondroitin sulfate-reduced graphene oxide (CrG), on which polar functional groups are distributed to effectively reduce the energy barrier for desolvation of Li+ and effectively alienate solvent molecules to avoid solvent involvement in SEI formation, thus promoting the formation of a LiF-rich SEI. Consequently, stable Coulombic efficiencies of 98.4% were achieved after 500 cycles in a Li//Cu cell. Moreover, the LiFePO4 full cells achieve steady circulation (470 cycles at 80%, 1 C) with a negative/positive electrode capacity ratio of 2.87. Our multifunctional artificial interface protective layer provides a new way to advance Li metal batteries.

Rational Molecular Engineering via Electron Reconfiguration toward Robust Dual-Electrode/Electrolyte Interphases for High-Performance Lithium Metal Batteries

High-energy-density lithium-metal batteries (LMBs) coupling lithium-metal anodes and high-voltage cathodes are hindered by unstable electrode/electrolyte interphases (EEIs), which calls for the rational design of efficient additives. Herein, we analyze the effect of electron structure on the coordination ability and energy levels of the additive, from the aspects of intramolecular electron cloud density and electron delocalization, to reveal its mechanism on solvation structure, redox stability, as-formed EEI chemistry, and electrochemical performances. Furthermore, we propose an electron reconfiguration strategy for molecular engineering of additives, by taking sorbide nitrate (SN) additive as an example. The lone pair electron-rich group enables strong interaction with the Li ion to regulate solvation structure, and intramolecular electron delocalization yields further positive synergistic effects. The strong electron-withdrawing nitrate moiety decreases the electron cloud density of the ether-based backbone, improving the overall oxidation stability and cathode compatibility, anchoring it as a reliable cathode/electrolyte interface (CEI) framework for cathode integrity. In turn, the electron-donating bicyclic-ring-ether backbone breaks the inherent resonance structure of nitrate, facilitating its reducibility to form a N-contained and inorganic Li2O-rich solid electrolyte interface (SEI) for uniform Li deposition. Optimized physicochemical properties and interfacial biaffinity enable significantly improved electrochemical performance. High rate (10 C), low temperature (-25 °C), and long-term stability (2700 h) are achieved, and a 4.5 Ah level Li||NCM811 multilayer pouch cell under harsh conditions is realized with high energy density (462 W h/kg). The proof of concept of this work highlights that the rational ingenious molecular design based on electron structure regulation represents an energetic strategy to modulate the electrolyte and interphase stability, providing a realistic reference for electrolyte innovations and practical LMBs.

Sustained Release-Driven Interface Engineering Enables Fast Charging Lithium Metal Batteries

LiNO3 has attracted intensive attention as a promising electrolyte additive to regulate Li deposition behavior as it can form favorable Li3N, LiNxOy species to improve the interfacial stability. However, the inferior solubility in carbonate-based electrolyte restricts its application in high-voltage Li metal batteries. Herein, an artificial composite layer (referred to as PML) composed of LiNO3 and PMMA is rationally designed on Li surface. The PML layer serves as a reservoir for LiNO3 release gradually to the electrolyte during cycling, guaranteeing the stability of SEI layer for uniform Li deposition. The PMMA matrix not only links the nitrogen-containing species for uniform ionic conductivity but also can be coordinated with Li for rapid Li ions migration, resulting in homogenous Li-ion flux and dendrite-free morphology. As a result, stable and dendrite-free plating/stripping behaviors of Li metal anodes are achieved even at an ultrahigh current density of 20 mA cm-2 (>570 h) and large areal capacity of 10 mAh cm-2 (>1200 h). Moreover, the Li||LiFePO4 full cell using PML-Li anode undergoes stable cycling for 2000 cycles with high-capacity retention of 94.8%. This facile strategy will widen the potential application of LiNO3 in carbonate-based electrolyte for practical LMBs.

Decreased Electrically and Increased Ionically Conducting Scaffolds for Long-Life, High-Rate and Deep-Capacity Lithium-Metal Anodes

Lithium (Li) metal batteries are deemed as promising next-generation power solutions but are hindered by the uncontrolled dendrite growth and infinite volume change of Li anodes. The extensively studied 3D scaffolds as solutions generally lead to undesired "top-growth" of Li due to their high electrical conductivity and the lack of ion-transporting pathways. Here, by reducing electrical conductivity and increasing the ionic conductivity of the scaffold, the deposition spot of Li to the bottom of the scaffold can be regulated, thus resulting in a safe bottom-up plating mode of the Li and dendrite-free Li deposition. The resulting symmetrical cells with these scaffolds, despite with a limited pre-plated Li capacity of 5 mAh cm-2, exhibit ultra-stable Li plating/stripping for over 1 year (11 000 h) at a high current density of 3 mA cm-2 and a high areal capacity of 3 mAh cm-2. Moreover, the full cells with these scaffolds further demonstrate high cycling stability under challenging conditions, including high cathode loading of 21.6 mg cm-2, low negative-to-positive ratio of 1.6, and limited electrolyte-to-capacity ratio of 4.2 g Ah-1.

Mechanically Interlocked Polymers with Dense Mechanical Bonds

ConspectusMechanically interlocked polymers (MIPs) such as polyrotaxanes and polycatenanes are polymer architectures that incorporate mechanical bonds, which represent a compelling frontier in polymer science. MIPs with cross-linked structures are known as mechanically interlocked networks (MINs) and are widely utilized in materials science. Leveraging the motion of mechanical bonds, MINs hold the potential for achieving a combination of robustness and dynamicity. Currently, the reported MINs predominantly consist of networks with discrete mechanical bonds as cross-linking points, exemplified by well-known slide-ring materials and rotaxane/catenane cross-linked polymers. The motion of these mechanically interlocked cross-linking points facilitates the redistribution of tension throughout the network, effectively preventing stress concentration and thereby enhancing material toughness. In these instances, the impact of mechanical bonds can be likened to the adage "small things can make a big difference", whereby a limited number of mechanical bonds substantially elevate the mechanical performance of conventional polymers. In addition to MINs cross-linked by mechanical bonds, there is another type of MIN in which their principal parts are polymer chains composed of dense mechanical bonds. Within these MINs, mechanical bonds generally serve as repeating units, and their unique properties stem from integrating and amplifying the function of a large amount of mechanical bonds. Consequently, MINs with dense mechanical bonds tend to reflect the intrinsic properties of mechanical interlocked polymers, making their exploration critical for a comprehensive understanding of MIPs. Nevertheless, investigations into MINs featuring dense mechanical bonds remain relatively scarce.This Account presents a comprehensive overview of our investigation and insights into MINs featuring dense mechanical bonds. First, we delve into the synthetic strategies employed to effectively prepare MINs with dense mechanical bonds, while critically evaluating their advantages and limitations. Through meticulous control of the core interlocking step, three distinct strategies have emerged: mechanical interlocking followed by polymerization, supramolecular polymerization followed by mechanical interlocking, and dynamic interlocking. Furthermore, we underscore the structure-property relationships of MINs with dense mechanical bonds. The macroscopic properties of MINs originate from integrating and amplifying countless microscopic motions of mechanical bonds, a phenomenon we define as an integration and amplification mechanism. Our investigation has revealed detailed motion characteristics of mechanical bonds in bulk mechanically interlocked materials, encompassing the quantification of motion activation energy, discrimination of varying motion distances, and elucidation of the recovery process. Additionally, we have elucidated their influence on the mechanical performance of the respective materials. Moreover, we have explored potential applications of MINs, leveraging their exceptional mechanical properties and dynamicity. These applications include enhancing the toughness of conventional polymers, engineering mechanically adaptive and multifunctional aerogels, and mitigating Li protrusion as interfacial layers in lithium-ion batteries. Finally, we offer our personal perspectives on the promises, opportunities, and key challenges in the future development of MINs with dense mechanical bonds, underscoring the potential for transformative advancements in this burgeoning field.

A solid-state lithium-ion battery with micron-sized silicon anode operating free from external pressure

Applying high stack pressure (often up to tens of megapascals) to solid-state Li-ion batteries is primarily done to address the issues of internal voids formation and subsequent Li-ion transport blockage within the solid electrode due to volume changes. Whereas, redundant pressurizing devices lower the energy density of batteries and raise the cost. Herein, a mechanical optimization strategy involving elastic electrolyte is proposed for SSBs operating without external pressurizing, but relying solely on the built-in pressure of cells. We combine soft-rigid dual monomer copolymer with deep eutectic mixture to design an elastic solid electrolyte, which exhibits not only high stretchability and deformation recovery capability but also high room-temperature Li-ion conductivity of 2×10-3 S cm-1 and nonflammability. The micron-sized Si anode without additional stack pressure, paired with the elastic electrolyte, exhibits exceptional stability for 300 cycles with 90.8% capacity retention. Furthermore, the solid Li/elastic electrolyte/LiFePO4 battery delivers 143.3 mAh g-1 after 400 cycles. Finally, the micron-sized Si/elastic electrolyte/LiFePO4 full cell operates stably for 100 cycles in the absence of any additional pressure, maintaining a capacity retention rate of 98.3%. This significantly advances the practical applications of solid-state batteries.

Mechanically Interlocked Interphase with Energy Dissipation and Fast Li-Ion Transport for High-Capacity Lithium Metal Batteries

Constructing an artificial solid electrolyte interphase (ASEI) on Li metal anodes (LMAs) is a potential strategy for addressing the dendrite issues. However, the mechanical fatigue of the ASEI caused by stress accumulation under the repeated deformation from the Li plating/stripping is not taken seriously. Herein, this work introduces a mechanically interlocked [an]daisy chain network (DC MIN) into the ASEI to stabilize the Li metal/ASEI interface by combining the functions of energy dissipation and fast Li-ion transport. The DC MIN featured by large-range molecular motions is cross-linked via efficient thiol-ene click chemistry; thus, the DC MIN has flexibility and excellent mechanical properties. As an ASEI, the crown ether units in DC MIN not only interact with the dialkylammonium of a flexible chain, forming the energy dissipation behavior but also coordinate with Li ion to support the fast Li-ion transport in DC MIN. Therefore, a stable 2800 h-symmetrical cycling (1 mA cm-2 ) and an excellent 5 C-rate (full cell with LiFePO4 ) performance are achieved by DC MIN-based ASEI. Furthermore, the 1-Ah pouch cell (LiNi0.88 Co0.09 Mn0.03 O2 cathode) with DC MIN-coated LMA exhibits improved capacity retention (88%) relative to the Control. The molecular design of DC MIN provides new insights into the optimization of an ASEI for high-energy LMAs.

Assembly and Utility of a Drawstring-Mimetic Supramolecular Complex

Inspired by the drawstring structure in daily life, here we report the development of a drawstring-mimetic supramolecular complex at the molecular scale. This complex consists of a rigid figure-of-eight macrocyclic host molecule and a flexible linear guest molecule which could interact through three-point non-covalent binding to form a highly selective and efficient host-guest assembly. The complex not only resembles the drawstring structure, but also mimics the properties of a drawstring with regard to deformations under external forces. The supramolecular drawstring can be utilized as an interlocked crosslinker for poly(methyl acrylate), and the corresponding polymer samples exhibit comprehensive enhancement of macroscopic mechanical performance including stiffness, strength, and toughness.

Work-Function-Induced Interfacial Electron/Ion Transport in Carbon Hosts toward Dendrite-Free Lithium Metal Anodes

Coupled electron/ion transport is a decisive feature of Li plating/stripping, wherein the compatibility of electron/ion transport rates determines the morphology of deposited Li. Local Li+ hotspots form due to inhomogeneous interfacial charge transfer and lead to uncontrolled Li deposition, which decreases the Li utilization rate and safety of Li metal anodes. Herein, we report a method to obtain dendrite-free Li metal anodes by driving electron pumping and accumulating and boosting Li ion diffusion by tuning the work function of a carbon host using cobalt-containing catalysts. The results reveal that increasing the work function provides an electron deviation from C to Co, and electron-rich Co shows favorable binding to Li+ . The Co catalysts boost Li+ diffusion on the carbon fiber scaffolds without local aggregation by reducing the Li+ migration barrier. The as-obtained dendrite-free Li metal anode exhibits a Coulombic efficiency of 99.0 %, a cycle life of over 2000 h, a Li utilization rate of 50 %, and a capacity retention of 83.4 % after 130 cycles in pouch cells at a negative/positive capacity ratio of 2.5. These findings provide a novel strategy to stabilize Li metal by regulating the work function of materials using electrocatalysts.

Regulating Steric Hindrance of Porous Organic Polymers in Composite Solid-State Electrolytes to Induce the Formation of LiF-Rich SEI in Li-Ion Batteries

Lithium fluoride (LiF) at the solid electrolyte interface (SEI) contributes to the stable operation of polymer-based solid-state lithium metal batteries. Currently, most of the methods for constructing lithium fluoride SEI are based on the design of polar groups of fillers. However, the mechanism behind how steric hindrance of fillers impacts LiF formation remains unclear. This study synthesizes three kinds of porous polyacetal amides (PAN-X, X=NH2 , NH-CH3 , N-(CH3 )2 ) with varying steric hindrances by regulating the number of methyl substitutions of nitrogen atoms on the reaction monomer, which are incorporated into polymer composite solid electrolytes, to investigate the regulation mechanism of steric hindrance on the content of lithium fluoride in SEI. The results show that bis(trifluoromethanesulfonyl)imide (TFSI- ) will compete for the charge without steric effect, while excessive steric hindrance hinders the interaction between TFSI- and polar groups, reducing charge acquisition. Only when one hydrogen atom on the amino group is replaced by a methyl group, steric hindrance from the methyl group prevents TFSI- from capturing charge in that direction, thereby facilitating the transfer of charge from the polar group to a separate TFSI- and promoting maximum LiF formation. This work provides a novel perspective on constructing LiF-rich SEI.

Engineering the Structural Uniformity of Gel Polymer Electrolytes via Pattern-Guided Alignment for Durable, Safe Solid-State Lithium Metal Batteries

Ultrathin and super-toughness gel polymer electrolytes (GPEs) are the key enabling technology for durable, safe, and high-energy density solid-state lithium metal batteries (SSLMBs) but extremely challenging. However, GPEs with limited uniformity and continuity exhibit an uneven Li+ flux distribution, leading to nonuniform deposition. Herein, a fiber patterning strategy for developing and engineering ultrathin (16 µm) fibrous GPEs with high ionic conductivity (≈0.4 mS cm-1 ) and superior mechanical toughness (≈613%) for durable and safe SSLMBs is proposed. The special patterned structure provides fast Li+ transport channels and tailoring solvation structure of traditional LiPF6 -based carbonate electrolyte, enabling rapid ionic transfer kinetics and uniform Li+ flux, and boosting stability against Li anodes, thus realizing ultralong Li plating/stripping in the symmetrical cell over 3000 h at 1.0 mA cm-2 , 1.0 mAh cm-2 . Moreover, the SSLMBs with high LiFePO4 loading of 10.58 mg cm-2 deliver ultralong stable cycling life over 1570 cycles at 1.0 C with 92.5% capacity retention and excellent rate capacity of 129.8 mAh g-1 at 5.0 C with a cut-off voltage of 4.2 V (100% depth-of-discharge). Patterned GPEs systems are powerful strategies for producing durable and safe SSLMBs.

Ant-Nest-like Lithiophilic Host for Long-Life Lithium Metal Anodes

The rational design of confined host to tutor Li nucleation and deposition behavior remains a key challenge for the long stability of lithium metal anodes (LMAs), while the scalability and feasibility of the method need to be taken into concern. Herein, a biomimic strategy is designed for tutoring in-depth nucleation and bottom-up Li deposition by composing ant-nest-like lithiophilic hosts for LMAs with light-weight flexible and conductive carbon nanotubes (CNTs) as the framework, table salt (sodium chloride, NaCl) as the washable porous creator, and homogeneously dispersed nano-Si as the nucleation site. It possesses similar optimized structure as ant nests in nature and can provide large and conductive inner volume for Li storage. Combining with the interconnected passways can ensure effective ion compensation like food transport channels for ants, and the well-designed host can take effect as an individual Li anode (5 mA h cm-2 area Li loading for demonstration) and the record-long stable LMA host can be achieved for over a 2200 h lifespan with minimum volume expansion. Therefore, this biomimic strategy is developed with all commercialized battery materials, and all industry compatible production methods can provide a feasible technical path for the stable, long-cyclability, and reliable host design for LMAs.

Lithiophilic Interface Layer Induced Uniform Deposition for Dendrite-free Lithium Metal Anodes in a 3D Polyethersulfone Frame

Lithium metal anodes possess ultrahigh theoretical specific capacity for next-generation lithium metal batteries, but the infinite volume expansion and the growth of lithium dendrites remain a huge obstacle to their commercialization. Therefore, here, we construct a CuO-loaded 3D polyethersulfone (PES) nanofiber frame onto a lithiophilic Cu₂O/Cu substrate to promote the lithium storage performance of the composite anode, and the 3D frame can effectively alleviate the volume expansion of lithium (Li) metal anodes. Meanwhile, lithium reacts with CuO in the composite nanofiber and Cu₂O of the substrate to generate Li₂O, which can strengthen the solid electrolyte interface (SEI) layer and achieve the uniform deposition of lithium. In addition, the combination of the heat treatment method and electrospinning technology solves the problem of poor adhesion between the fiber film and the substrate. As a result, the PES/CuO-Cu₂O (PCC) composite current collector still maintains a smooth and flat lithium-depositing layer at 5 mA cm^-2. The PCC-assembled Li||Cu half-cell can operate stably for 320 cycles at 0.5 mA cm^-2, which is about 4 times that of bare Cu. Furthermore, symmetrical batteries with PCC@Li can maintain excellent cycle stability for 1770 h. Accordingly, this work provides a low-cost and highly effective strategy for stabilizing the lithium metal anode.

Outstanding Electrochemical Performance of Ni-Rich Concentration-Gradient Cathode Material LiNi0.9Co0.083Mn0.017O2 for Lithium-Ion Batteries

The full-concentrationgradient LiNi_0.9Co_0.083Mn_0.017O₂ (CG-LNCM), consisting of core Ni-rich LiNi_0.93Co_0.07O₂, transition zone LiNi_1-x-yCo_xMn_yO_2, and outmost shell LiNi_1/3Co_1/3Mn_1/3O₂ was prepared by a facile co-precipitation method and high-temperature calcination. CG-LNCM was then investigated with an X-ray diffractometer, ascanning electron microscope, a transmission electron microscope, and electrochemical measurements. The results demonstrate that CG-LNCM has a lower cation mixing of Li⁺ and Ni²⁺ and larger Li⁺ diffusion coefficients than concentration-constant LiNi_0.9Co_0.083Mn_0.017O₂ (CC-LNCM). CG-LNCM presents a higher capacity and a better rate of capability and cyclability than CC-LNCM. CG-LNCM and CC-LNCM show initial discharge capacities of 221.2 and 212.5 mAh g^-1 at 0.2C (40 mA g^-1) with corresponding residual discharge capacities of 177.3 and 156.1 mAh g^-1 after 80 cycles, respectively. Even at high current rates of 2C and 5C, CG-LNCM exhibits high discharge capacities of 165.1 and 149.1 mAh g^-1 after 100 cycles, respectively, while the residual discharge capacities of CC-LNCM are as low as 148.8 and 117.9 mAh g^-1 at 2C and 5C after 100 cycles, respectively. The significantly improved electrochemical performance of CG-LNCM is attributed to its concentration-gradient microstructure and the composition distribution of concentration-gradient LiNi_0.9Co_0.083Mn_0.017O₂. The special concentration-gradient design and the facile synthesis are favorable for massive manufacturing of high-performance Ni-rich ternary cathode materials for lithium-ion batteries.

Surface engineering toward stable lithium metal anodes

The lithium (Li) metal anode (LMA) is susceptible to failure due to the growth of Li dendrites caused by an unsatisfied solid electrolyte interface (SEI). With this regard, the design of artificial SEIs with improved physicochemical and mechanical properties has been demonstrated to be important to stabilize the LMAs. This review comprehensively summarizes current efficient strategies and key progresses in surface engineering for constructing protective layers to serve as the artificial SEIs, including pretreating the LMAs with the reagents situated in different primary states of matter (solid, liquid, and gas) or using some peculiar pathways (plasma, for example). The fundamental characterization tools for studying the protective layers on the LMAs are also briefly introduced. Last, strategic guidance for the deliberate design of surface engineering is provided, and the current challenges, opportunities, and possible future directions of these strategies for the development of LMAs in practical applications are discussed.

Multifunctional α-MoO3 Nanobelt Interlayer with the Capacity Compensation Effect for High-Energy Lithium-Sulfur Batteries

Spatial hindrance of lithium polysulfide (LiPS) diffusion by inserting a barrier interlayer has been deemed as an effective strategy to restrict the shuttle effect in lithium-sulfur batteries (LSBs). However, the extra interlayer without reversible capacity production inevitably reduces the actual energy density of the battery. Herein, a freestanding α-MoO₃ nanobelt interlayer with the decoration of TiN nanoparticles and carbon nanotubes (denoted as MCT) is established. To investigate the capacity compensation effect of the MCT during cell operations, X-ray absorption near-edge spectrometry is conducted. It is revealed that MoO₃ can sustain a reversible Li intercalation/deintercalation in a voltage range of 1.8-2.8 V, providing 180 mAh g^-1 of extra capacity for compensating sulfur cathode. In addition, the adsorption of the lithiated α-MoO₃ toward LiPSs is further evaluated. By matching a high-loading sulfur cathode (3.0 mg cm^-2), a superior capacity of 713.3 mAh g^-1 can be retained after 100 cycles under the MCT assistance.

Improved Parameter Identification for Lithium-Ion Batteries Based on Complex-Order Beetle Swarm Optimization Algorithm

With the aim of increasing the model accuracy of lithium-ion batteries (LIBs), this paper presents a complex-order beetle swarm optimization (CBSO) method, which employs complex-order (CO) operator concepts and mutation into the traditional beetle swarm optimization (BSO). Firstly, a fractional-order equivalent circuit model of LIBs is established based on electrochemical impedance spectroscopy (EIS). Secondly, the CBSO is used for model parameters' identification, and the model accuracy is verified by simulation experiments. The root-mean-square error (RMSE) and maximum absolute error (MAE) optimization metrics show that the model accuracy with CBSO is superior when compared with the fractional-order BSO.

Fabrication of a Biomass-Derived Activated Carbon-Based Anode for High-Performance Li-Ion Batteries

Porous carbons are highly attractive and demanding materials which could be prepared using biomass waste; thus, they are promising for enhanced electrochemical capacitive performance in capacitors and cycling efficiency in Li-ion batteries. Herein, biomass (rice husk)-derived activated carbon was synthesized via a facile chemical route and used as anode materials for Li-ion batteries. Various characterization techniques were used to study the structural and morphological properties of the prepared activated carbon. The prepared activated carbon possessed a carbon structure with a certain degree of amorphousness. The morphology of the activated carbon was of spherical shape with a particle size of ~40-90 nm. Raman studies revealed the characteristic peaks of carbon present in the prepared activated carbon. The electrochemical studies evaluated for the fabricated coin cell with the activated carbon anode showed that the cell delivered a discharge capacity of ~321 mAhg^-1 at a current density of 100 mAg^-1 for the first cycle, and maintained a capacity of ~253 mAhg^-1 for 400 cycles. The capacity retention was found to be higher (~81%) with 92.3% coulombic efficiency even after 400 cycles, which showed excellent cyclic reversibility and stability compared to commercial activated carbon. These results allow the waste biomass-derived anode to overcome the problem of cyclic stability and capacity performance. This study provides an insight for the fabrication of anodes from the rice husk which can be redirected into creating valuable renewable energy storage devices in the future, and the product could be a socially and ethically acceptable product.