Self-Reconstructed Metal-Organic Framework Heterojunction for Switchable Oxygen Evolution Reaction

Enhancing interfacial electron transfer through PANI electron bridge for tailoring dynamic reconstruction and achieving high-performance water oxidation

Tailoring the dynamic reconstruction of transition metal compounds into highly active oxyhydroxides through surface electron state modification is crucial for advancing water oxidation, yet remains a formidable challenge. In this study, a unique polyaniline (PANI) electron bridge was integrated into the metal-organic frameworks (MOFs)/layer double hydroxides (LDHs) heterojunction to expedite electron transfer from MOFs to LDHs, facilitating electron accumulation at the metal sites within MOF and electron-deficient LDHs. This configuration promotes the surface dynamic reconstruction of LDHs into highly active oxyhydroxides while safeguarding the MOF from corrosion in harsh environments over extended periods. The optimized electronic structure modification of both MOFs and LDHs enhances reaction kinetics. The superior MIL-88B(Fe)@PANI@NiCo LDH catalyst achieved 10 mA∙cm-2 at an overpotential of 202 mV and demonstrated stable operation for 120 h at this current density. This research introduces an innovative approach for guiding electron transfer and dynamic catalyst reconstruction by constructing a PANI electron bridge, potentially paving the way for more efficient catalytic systems.

A one-pot hydrothermal synthesis of morphologically controllable yolk-shell structured CoFe glycerate spheres for oxygen evolution reaction

CoFe-based catalysts are efficient electrocatalysts for the oxygen evolution reaction (OER) in alkaline media. Here, we present a simple one-pot hydrothermal method for synthesizing a series of CoFe glycerates with controllable surface morphologies and investigate their potential as highly efficient catalysts for the OER in alkaline media. These CoFe glycerates exhibit a unique yolk-shell microsphere structure assembled from ultrathin nanosheets. The adjustment of the surface nanosheet size is achieved by varying the CoFe ratio, ensuring a more efficient electrocatalytic system for the OER process. Due to the abundant active sites provided by the yolk-shell structure and interleaved ultrathin nanosheets, Co3Fe1 glycerate (Co3Fe1 gly) demonstrates a low overpotential (283 mV) and a small Tafel slope (44.61 mV dec-1) at 10 mA cm-2. Additionally, Co3Fe1 gly exhibits excellent durability in alkaline electrolytes. Moreover, a series of characterizations demonstrate that the active sites of Co3Fe1 gly are the high-valence Co species generated during the OER process. This study opens a promising avenue for utilizing efficient and low-cost electrocatalysts to enhance OER performance.

Ce-4f as an electron-modulation reservoir weakening Fe-O bond to induce iron vacancies in CeFevNi hydroxide for enhancing oxygen evolution reaction

Designing novel rare-earth-transition metal composites is at the forefront of electrocatalyst research. However, the modulation of transition metal electronic structures by rare earths to induce vacancy defects and enhance electrochemical performance has rarely been reported. In this study, we systematically investigate the mechanism by which Ce-4f electron modulation weakens the Fe-O bond, thereby altering the electronic structure in CeFevNi hydroxide to improve oxygen evolution reaction (OER) performance. Theoretical calculations and experimental characterizations reveal that Ce-4f orbitals function as electron-modulation reservoirs, capable not only of retaining or donating electrons but also of influencing the material's electronic structure. Moreover, Ce-4f bands optimize the Fe lower Hubbard bands (LHB) and O-2p bands, leading to weakened Fe-O bonds and the formation of cationic vacancies. This change results in the upshift of the d-band center at the active sites, favoring the reaction energy barrier for oxygen intermediates in the OER process. The synthesized catalyst demonstrated an overpotential of 201 mV at 10 mA cm-2 and a lifetime exceeding 200 h at 100 mA cm-2 under alkaline conditions. This work offers a proof-of-concept for the application of the mechanism of rare earth-induced transition metal vacancy defects, providing a general guideline for the design and development of novel highly efficient catalysts.

Designing ternary Co-Ni-Fe layered double hydroxides within a novel 3D cross-flower framework for efficient catalytic performance in oxygen evolution reaction

In this study, we synthesized novel three-dimensional (3D) cross-flowered Co-Ni metal-organic framework (Co-Ni-MOF) precursors using the chemical precipitation method. Subsequently, we obtained Co-Ni-Fe layered double hydroxides (Co-Ni-Fe-LDHs) through an ion exchange strategy, which preserved their original morphology while consisting of ultrathin layered hydroxide nanosheets. The interlayer spacing of the LDH lamellar structure was finely tuned by varying the ratios of Co to Ni. The results demonstrated that Co-Ni-Fe LDHs, characterized by a unique three-dimensional cross-shaped structure and an optimal composition ratio of Co2+:Ni2+ = 2:1, exhibited increased interlayer spacing. This structural characteristic contributed to their excellent electrochemical performance, positioning them as optimal electrode materials for catalytic oxygen evolution reactions (OER). Our observations revealed that Co-Ni-Fe-LDHs exhibited remarkable OER activity, characterized by a low Tafel slope of 41.82 mV dec-1, a low overpotential of 322 mV at a current density of 10 mA cm-2, and outstanding stability over a 48-hour period. In-situ Raman spectroscopy results indicated that the active site of the composite was γ-CoOOH. Additionally, the room temperature stirring and standing strategy employed in this study is easier to scale up and yields a higher quantity of reaction products compared to traditional high-temperature and high-pressure conditions. This investigation provides novel insights into the design and fabrication of Co-Ni-Fe-LDHs catalyst with 3D cross-flower structures, demonstrating enhanced electrocatalytic activity and commendable stability. These findings suggest promising applications in the field of electrolyzed water.

Stability of electrocatalytic OER: from principle to application

Hydrogen energy, derived from the electrolysis of water using renewable energy sources such as solar, wind, and hydroelectric power, is considered a promising form of energy to address the energy crisis. However, the anodic oxygen evolution reaction (OER) poses limitations due to sluggish kinetics. Apart from high catalytic activity, the long-term stability of electrocatalytic OER has garnered significant attention. To date, several research studies have been conducted to explore stable electrocatalysts for the OER. A comprehensive review is urgently warranted to provide a concise overview of the recent advancements in the electrocatalytic OER stability, encompassing both electrocatalyst and device developments. This review aims to succinctly summarize the primary factors influencing OER stability, including morphological/phase change and electrocatalyst dissolution, as well as mechanical detachment, alongside chemical, mechanical, and operational degradation observed in devices. Furthermore, an overview of contemporary approaches to enhance stability is provided, encompassing electrocatalyst design (structural regulation, protective layer coating, and stable substrate anchoring) and device optimization (bipolar plates, gas diffusion layers, and membranes). Hopefully, more attention will be paid to ensuring the stable operation of electrocatalytic OER and the future large-scale water electrolysis applications. This review presents design principles aimed at addressing challenges related to the stability of electrocatalytic OER.

Constructing Co4(SO4)4 Clusters within Metal-Organic Frameworks for Efficient Oxygen Electrocatalysis

Multinuclear metal clusters are ideal candidates to catalyze small molecule activation reactions involving the transfer of multiple electrons. However, synthesizing active metal clusters is a big challenge. Herein, on constructing an unparalleled Co4(SO4)4 cluster within porphyrin-based metal-organic frameworks (MOFs) and the electrocatalytic features of such Co4(SO4)4 clusters for the oxygen evolution reaction (OER) and oxygen reduction reaction (ORR) is reported. The reaction of CoII sulfate and metal complexes of tetrakis(4-pyridyl)porphyrin under solvothermal conditions afforded Co4-M-MOFs (M═Co, Cu, and Zn). Crystallographic studies revealed that these Co4-M-MOFs have the same framework structure, having the Co4(SO4)4 clusters connected by metalloporphyrin units through Co─Npyridyl bonds. In the Co4(SO4)4 cluster, the four CoII ions are chemically and symmetrically equivalent and are each coordinated with four sulfate O atoms to give a distorted cube-like structure. Electrocatalytic studies showed that these Co4-M-MOFs are all active for electrocatalytic OER and ORR. Importantly, by regulating the activity of the metalloporphyrin units, it is confirmed that the Co4(SO4)4 cluster is active for oxygen electrocatalysis. With the use of Co porphyrins as connecting units, Co4-Co-MOF displays the highest electrocatalytic activity in this series of MOFs by showing a 10 mA cm-2 OER current density at 357 mV overpotential and an ORR half-wave potential at 0.83 V versus reversible hydrogen electrode (RHE). Theoretical studies revealed the synergistic effect of two proximal Co atoms in the Co4(SO4)4 cluster in OER by facilitating the formation of O─O bonds. This work is of fundamental significance to present the construction of Co4(SO4)4 clusters in framework structures for oxygen electrocatalysis and to demonstrate the cooperation between two proximal Co atoms in such clusters during the O─O bond formation process.

In-situ synthesis to promote surface reconstruction of metal-organic frameworks for high-performance water/seawater oxidation

Metal-organic frameworks (MOFs) have gained tremendous notice for the application in alkaline water/seawater oxidation due to their tunable structures and abundant accessible metal sites. However, exploring cost-effective oxygen evolution reaction (OER) electrocatalysts with high catalytic activity and excellent stability remains a great challenge. In this work, a promising strategy is proposed to regulate the crystalline structures and electronic properties of NiFe-metal-organic frameworks (NiFe-MOFs) by altering the organic ligands. As a representative sample, NiFe-BDC (BDC: C8H6O4) synthesized on nickel foam (NF) shows extraordinary OER activity in alkaline condition, delivering ultralow overpotentials of 204, 234 and 273 mV at 10, 100, and 300 mA cm-2, respectively, with a small Tafel slope of 21.6 mV dec-1. Only a slight decrease is observed when operating in alkaline seawater. The potential attenuation is barely identified at 200 mA cm-2 over 200 h continuous test, indicating the remarkable stability and corrosion resistance. In-situ measurements indicate that initial Ni2+/Fe2+ goes through oxidation process into Ni3+/Fe3+ during OER, and eventually presents in the form of NiFeOOH/NiFe-BDC heterojunction. The unique self-reconstructed surface is responsible for the low reaction barrier and fast reaction kinetics. This work provides an effective strategy to develop efficient MOF-based electrocatalysts and an insightful view on the dynamic structural evolution during OER.

Structural Reconstruction of a Cobalt- and Ferrocene-Based Metal-Organic Framework during the Electrochemical Oxygen Evolution Reaction

Metal-organic frameworks (MOFs) are increasingly being investigated as electrocatalysts for the oxygen evolution reaction (OER) due to their unique modular structures that present a hybrid between molecular and heterogeneous catalysts, featuring well-defined active sites. However, many fundamental questions remain open regarding the electrochemical stability of MOFs, structural reconstruction of coordination sites, and the role of in situ-formed species. Here, we report the structural transformation of a surface-grown MOF containing cobalt nodes and 1,1'-ferrocenedicarboxylic acid linkers (denoted as CoFc-MOF) during the OER in alkaline electrolyte. Ex situ and in situ investigations of CoFc-MOF film suggest that the MOF acts as a precatalyst and undergoes a two-step restructuring process under operating conditions to generate a metal oxyhydroxide phase. The MOF-derived metal oxyhydroxide catalyst, supported on nickel foam electrodes, displays high activity toward the OER with an overpotential of 190 mV at a current density of 10 mA cm-2. While this study demonstrates the necessity of investigating structural evolution of MOFs during electrocatalysis, it also shows the potential of using MOFs as precursors in catalyst design.

A bimetallic NiFe MOF with ultra-thin two-dimensional nanosheet structure effectively accelerates oxygen evolution reaction

To address the shortage of fossil energy, the development of affordable and efficient non-precious metal catalysts for oxygen evolution reaction (OER) from electrocatalytic water splitting is still a crucial challenge. Herein, the bimetallic NiFe metal-organic frameworks (MOFs) are synthesized by hydrothermal and electro-deposition. Benefiting from the synergistic effect of Fe and Ni, the catalyst demonstrates extraordinary activity, which exhibits favorable OER catalytic activity in 1 M KOH solution with an overpotential of 206 mV at 10 mA cm-2. Meanwhile, the obtained NiFe-NDC presents promising stability in the 20 h test at 50 mA cm-2.

Enhancing Oxygen Evolution Reaction Performance of Metal-Organic Frameworks through Cathode Activation

Due to their abundant active sites and porous structures, metal-organic frameworks (MOFs) have garnered significant interest as oxygen evolution reaction (OER) electrocatalysts. Nevertheless, the development of MOF s-based electrocatalysts with efficient OER activity and excellent stability simultaneously still face challenges. Herein, a cathodic activation strategy was used to enhance the OER electrocatalytic performance of M-HHTP for the first time, where M refers to Ni, Cu, Co, Fe, while HHTP denotes 2, 3, 6, 7, 10, 11-hexahydroxytriphenylene. As a prototype, the activated Ni-HHTP (HA-Ni-HHTP) demonstrates outstanding OER performance, with an overpotential as low as 140 mV at 20 mA cm-2 and a small Tafel slope of 78.7 mV-1, surpassing commercial RuO2 and rivaling state-of-the-art MOFs-based electrocatalysts. Characterizations and density functional theory calculations reveal that the superior performance of HA-Ni-HHTP is primarily ascribed to changes in semiconductor type, contact angle, and oxygen vacancy content induced by cathodic activation. Electrochemical impedance spectroscopy analysis using the transmission line model confirms that cathodic activation accelerates charge transport, enhancing the OER process. Furthermore, the cathodic activation strategy holds promise for improving the water oxidation performance of other MOFs such as Fe-HHTP, Co-HHTP, and Cu-HHTP.

Operando-reconstructed polyatomic ion layers boost the activity and stability of industrial current-density water splitting

Metal-organic frameworks have garnered attention as highly efficient pre-electrocatalysts for the oxygen evolution reaction (OER). Current structure-activity relationships primarily rely on the assumption that the complete dissolution of organic ligands occurs during electrocatalysis. Herein, modeling based on NiFe Prussian blue analogs (NiFe-PBAs) show that cyanide ligands leach from the matrix and subsequently oxidize to corresponding inorganic ions (ammonium and carbonate) that re-adsorb onto the surface of NiFe OOH during the OER process. Interestingly, the surface-adsorbed inorganic ions induce the OER reaction of NiFe OOH to switch from the adsorbate evolution to the lattice-oxygen-mediated mechanism, thus contributing to the high activity. In addition, this reconstructed inorganic ion layer acting as a versatile protective layer can prevent the dissolution of metal sites to maintain contact between catalytic sites and reactive ions, thus breaking the activity-stability trade-off. Consequently, our constructed NiFe-PBAs exhibit excellent durability for 1250 h with an ultralow overpotential of 253 mV at 100 mA cm-2. The scale-up NiFe-PBAs operated with a low energy consumption of ∼4.18 kWh m-3 H2 in industrial water electrolysis equipment. The economic analysis of the entire life cycle demonstrates that this green hydrogen production is priced at US$2.59/ [Formula: see text] , meeting global targets ( Collapse

Key Words

• Chemical recognition
• Industrial water electrolysis
• Oxygen evolution mechanism

Collapse

MESH Headings Collapse

Grants Collapse

Affiliation(s)

Yingxia Zhao Guangdong Engineering Technology Research Center of Modern Fine Chemical Engineering, School of Chemical Engineering and Light Industry, Guangdong University of Technology, Guangzhou 510006, China; Analysis and Test Center Guangdong University of Technology, Guangdong University of Technology, Guangzhou 510006, China
Ying Wu Guangdong Engineering Technology Research Center of Modern Fine Chemical Engineering, School of Chemical Engineering and Light Industry, Guangdong University of Technology, Guangzhou 510006, China; Jieyang Branch of Chemistry and Chemical Engineering Guangdong Laboratory (Rongjiang Laboratory), Jieyang 515200, China; School of Chemistry and Chemical Engineering, South China University of Technology, Guangzhou 510641, China
Qunlei Wen State Key Laboratory of Materials Processing and Die & Mould Technology, and School of Materials Science and Engineering, Huazhong University of Science and Technology, Wuhan 430074, China
Danji Huang State Key Laboratory of Advanced Electromagnetic Engineering and Technology, and School of Electrical and Electronic Engineering, Huazhong University of Science and Technology, Wuhan 430074, China
Ruoou Yang State Key Laboratory of Materials Processing and Die & Mould Technology, and School of Materials Science and Engineering, Huazhong University of Science and Technology, Wuhan 430074, China
Haozhi Wang State Key Laboratory of Marine Resource Utilization in South China Sea, School of Materials Science and Engineering, Hainan University, Haikou 570228, China
Yingying Xu Guangdong Engineering Technology Research Center of Modern Fine Chemical Engineering, School of Chemical Engineering and Light Industry, Guangdong University of Technology, Guangzhou 510006, China
Ming Sun Guangdong Engineering Technology Research Center of Modern Fine Chemical Engineering, School of Chemical Engineering and Light Industry, Guangdong University of Technology, Guangzhou 510006, China; Jieyang Branch of Chemistry and Chemical Engineering Guangdong Laboratory (Rongjiang Laboratory), Jieyang 515200, China
Youwen Liu State Key Laboratory of Materials Processing and Die & Mould Technology, and School of Materials Science and Engineering, Huazhong University of Science and Technology, Wuhan 430074, China.
Jiakun Fang State Key Laboratory of Advanced Electromagnetic Engineering and Technology, and School of Electrical and Electronic Engineering, Huazhong University of Science and Technology, Wuhan 430074, China.
Tianyou Zhai State Key Laboratory of Materials Processing and Die & Mould Technology, and School of Materials Science and Engineering, Huazhong University of Science and Technology, Wuhan 430074, China
Lin Yu Guangdong Engineering Technology Research Center of Modern Fine Chemical Engineering, School of Chemical Engineering and Light Industry, Guangdong University of Technology, Guangzhou 510006, China; Jieyang Branch of Chemistry and Chemical Engineering Guangdong Laboratory (Rongjiang Laboratory), Jieyang 515200, China.

Collapse

In Situ Modulation of Oxygen Vacancies on 2D Metal Hydroxide Organic Frameworks for High-Efficiency Oxygen Evolution Reaction

The discovery of non-precious catalysts for replacing the precious metal of ruthenium in the oxygen evolution reaction (OER) represents a key step in reducing the cost of green hydrogen production. The 2D d-MHOFs, a new 2D materials with controllable oxygen vacancies formed by controlling the degree of coordination bridging between metal hydroxyl oxide and BDC ligands are synthesized at room temperature, exhibit excellent OER properties with low overpotentials of 207  mV at 10 mA cm-2. High-resolution transmission electron microscopy images and density functional theory calculations demonstrate that the introduction of oxygen vacancy sites leads to a lattice distortion and charge redistribution in the catalysts, enhancing the OER activity of 2D d-MHOFs comprehensively. Synchrotron radiation and in situ Raman/Fourier transform infrared spectroscopy indicate that part of oxygen defect sites on the surface of 2D d-MHOFs are prone to transition to highly active metal hydroxyl oxides during the OER process. This work provides a mild strategy for scalable preparation of 2D d-MHOFs nanosheets with controllable oxygen defects, reveals the relationship between oxygen vacancies and OER performance, and offers a profound insight into the basic process of structural transformation in the OER process.

Molten Guest-Mediated Metal-Organic Frameworks Featuring Multi-Modal Supramolecular Interaction Sites for Flame-Retardant Superionic Conductor in All-Solid-State Batteries

The development of solid-state electrolytes (SSEs) with outstanding comprehensive performance is currently a critical challenge for achieving high energy density and safer solid-state batteries (SSBs). In this study, a strategy of nano-confined in situ solidification is proposed to create a novel category of molten guest-mediated metal-organic frameworks, named MGM-MOFs. By embedding the newly developed molten crystalline organic electrolyte (ML20) into the nanocages of anionic MOF-OH, MGM-MOF-OH, characterized by multi-modal supramolecular interaction sites and continuous negative electrostatic environments within nano-channels, is achieved. These nanochannels promote ion transport through the successive hopping of Li+ between neighbored negative electrostatic environments and suppress anion movement through the chemical constraint of the hydroxyl-functionalized pore wall. This results in remarkable Li+ conductivity of 7.1 × 10-4 S cm-1 and high Li+ transference number of 0.81. Leveraging these advantages, the SSBs assembled with MGM-MOF-OH exhibit impressive cycle stability and a high specific energy density of 410.5 Wh kganode + cathode + electrolyte -1 under constrained conditions and various working temperatures. Unlike flammable traditional MOFs, MGM-MOF-OH demonstrates high robustness under various harsh conditions, including ignition, high voltage, and extended to humidity.

Ru/Ir-Based Electrocatalysts for Oxygen Evolution Reaction in Acidic Conditions: From Mechanisms, Optimizations to Challenges

The generation of green hydrogen by water splitting is identified as a key strategic energy technology, and proton exchange membrane water electrolysis (PEMWE) is one of the desirable technologies for converting renewable energy sources into hydrogen. However, the harsh anode environment of PEMWE and the oxygen evolution reaction (OER) involving four-electron transfer result in a large overpotential, which limits the overall efficiency of hydrogen production, and thus efficient electrocatalysts are needed to overcome the high overpotential and slow kinetic process. In recent years, noble metal-based electrocatalysts (e.g., Ru/Ir-based metal/oxide electrocatalysts) have received much attention due to their unique catalytic properties, and have already become the dominant electrocatalysts for the acidic OER process and are applied in commercial PEMWE devices. However, these noble metal-based electrocatalysts still face the thorny problem of conflicting performance and cost. In this review, first, noble metal Ru/Ir-based OER electrocatalysts are briefly classified according to their forms of existence, and the OER catalytic mechanisms are outlined. Then, the focus is on summarizing the improvement strategies of Ru/Ir-based OER electrocatalysts with respect to their activity and stability over recent years. Finally, the challenges and development prospects of noble metal-based OER electrocatalysts are discussed.

Accelerated Dynamic Reconstruction in Metal-Organic Frameworks with Ligand Defects for Selective Electrooxidation of Amines to Azos Coupling with Hydrogen Production

Electrosynthesis coupled hydrogen production (ESHP) mostly involves catalyst reconstruction in aqueous phase, but accurately identifying and controlling the process is still a challenge. Herein, we modulated the electronic structure and exposed unsaturated sites of metal-organic frameworks (MOFs) via ligand defect to promote the reconstruction of catalyst for azo electrosynthesis (ESA) coupled with hydrogen production overall reaction. The monolayer Ni-MOFs achieved 89.8 % Faraday efficiency and 90.8 % selectivity for the electrooxidation of 1-methyl-1H-pyrazol-3-amine (Pyr-NH2) to azo, and an 18.5-fold increase in H2 production compared to overall water splitting. Operando X-ray absorption fine spectroscopy (XAFS) and various in situ spectroscopy confirm that the ligand defect promotes the potential dependent dynamic reconstruction of Ni(OH)2 and NiOOH, and the reabsorption of ligand significantly lowers the energy barrier of rate-determining step (*Pyr-NH to *Pyr-N). This work provides theoretical guidance for modulation of electrocatalyst reconstruction to achieve highly selective ESHP.

Self-Supported WO3@RuO2 Nanowires for Electrocatalytic Acidic Water Oxidation

Developing catalysts with high catalytic activity and stability in acidic media is crucial for advancing hydrogen production in proton exchange membrane water electrolyzers (PEMWEs). To this end, a self-supported WO3@RuO2 nanowire structure was grown in situ on a titanium mesh using hydrothermal and ion-exchange methods. Despite a Ru loading of only 0.098 wt %, it achieves an overpotential of 246 mV for the oxygen evolution reaction (OER) at a current density of 10 mA·cm-2 in acidic 0.5 M H2SO4 while maintaining excellent stability over 50 h, much better than that of the commercial RuO2. After the establishment of the WO3@RuO2 heterostructure, a reduced overpotential of the rate-determining step from M-O* to M-OOH* is confirmed by the DFT calculation. Meanwhile, its enhanced OER kinetics are also greatly improved by this self-supported system in the absence of the organic binder, leading to a reduced interface resistance between active sites and electrolytes. This work presents a promising approach to minimize the use of noble metals for large-scale PEMWE applications.

Construction of Core-Shelled Covalent/Metal-Organic Frameworks for Oxygen Evolution Reaction

Oxygen evolution reaction (OER) is the half-reaction in zinc-air batteries and water splitting. Developing highly efficient catalysts toward OER is a challenge due to the difficulty of removing four electrons from two water molecules. Covalent organic frameworks (COFs) provide the new chance to construct the highly active catalysts for OER, because they have controlled skeletons, porosities, and well-defined catalytic sites. In this work, core-shell hybrids of COF and metal-organic frameworks (MOFs) have first demonstrated to catalyze the OER. The synergetic effects between the COF-shell and MOF-core render the catalyst with higher activity than those from the COF and MOF. And the catalyst achieved an overpotential of 328 mV, with a Tafel slope of 43.23 mV dec-1 in 1 m KOH. The theoretical calculation revealed that the high activity is from the Fe sites in the catalyst, which has suitable binding ability of reactant intermediate (OOH*), and thus contributed high activity. This work gives a new insight to designing COFs in electrochemical energy storage and conversion systems.

In Situ Electrochemical Restructuring B-Doped Metal-Organic Frameworks as Efficient OER Electrocatalysts for Stable Anion Exchange Membrane Water Electrolysis

Metal organic frameworks (MOFs) are promising as effective electrocatalysts toward oxygen evolution reaction (OER). However, the origin of OER activity for MOF-based electrocatalysts is still unclear because of their structure reconstruction during electrocatalysis process. Here, a novel MOF (B-MOF-Zn-Co) with spherical superstructure is developed by hydrothermal treatment of zeolitic imidazolate framework-Zn, Co (ZIF-Zn-Co) using boric acid. The resultant B-MOF-Zn-Co shows high OER activity with a low overpotential of 362 mV at 100 mA cm-2. Remarkably, B-MOF-Zn-Co displays excellent stability with only 3.6% voltage delay over 300 h at 100 mA cm-2 in alkaline electrolyte. Surprisingly, B-MOF-Zn-Co thoroughly transforms into B-doped CoOOH (B-CoOOH) during electrolysis process, which is served as actual active material for high OER electrocatalytic performance. The newly-formed B-CoOOH possesses lower energy barrier of potential-determining step (PDS) for OOH* formation compared with CoOOH, benefiting for high OER activity. More importantly, B-MOF-Zn-Co based anion exchange membrane water electrolytic cell (AEMWE) demonstrates continuously durable operation with stable current density of 200 mA cm-2 over 300 h, illustrating its potential application in practice water electrolysis. This work offers an in situ electrochemical reconstruction strategy for the development of stable and effective OER electrocatalysts toward practice AEMWE.

Interfaces Engineering of Ultrafine Ni@Ni2P/C Core-Shell Heterostructure for High Yield Hydrogen Peroxide Electrosynthesis

Developing cost-effective and sustainable catalysts with exceptional activity and selectivity is essential for the practical implementation of on-site H2O2 electrosynthesis, yet it remains a formidable challenge. Metal phosphide core-shell heterostructures anchored in carbon nanosheets (denoted as Ni@Ni2P/C NSs) are designed and synthesized via carbonization and phosphidation of the 2D Ni-BDC precursor. This core-shell nanostructure provides more accessible active sites and enhanced durability, while the 2D carbon nanosheet substrate prevents heterostructure aggregation and facilitates mass transfer. Theoretical calculations further reveal that the Ni/Ni2P heterostructure-induced optimization of geometric and electronic structures enables the favored adsorption of OOH* intermediate. All these features endow the Ni@Ni2P/C NSs with remarkable performance in 2e ORR for H2O2 synthesis, achieving a top yield rate of 95.6 mg L-1 h-1 with both selectivity and Faradaic efficiency exceeding 90% under a wide range of applied potentials. Furthermore, when utilized as the anode of an assembled gas diffusion electrode (GDE) device, the Ni@Ni2P/C NSs achieve in situ H2O2 production with excellent long-term durability (>32 h). Evidently, this work provides a unique insight into the origin of 2e ORR and proposes optimization of H2O2 production through nano-interface manipulation.

Bifunctional Electrocatalysts for Overall and Hybrid Water Splitting

Electrocatalytic water splitting driven by renewable electricity has been recognized as a promising approach for green hydrogen production. Different from conventional strategies in developing electrocatalysts for the two half-reactions of water splitting (e.g., the hydrogen and oxygen evolution reactions, HER and OER) separately, there has been a growing interest in designing and developing bifunctional electrocatalysts, which are able to catalyze both the HER and OER. In addition, considering the high overpotentials required for OER while limited value of the produced oxygen, there is another rapidly growing interest in exploring alternative oxidation reactions to replace OER for hybrid water splitting toward energy-efficient hydrogen generation. This Review begins with an introduction on the fundamental aspects of water splitting, followed by a thorough discussion on various physicochemical characterization techniques that are frequently employed in probing the active sites, with an emphasis on the reconstruction of bifunctional electrocatalysts during redox electrolysis. The design, synthesis, and performance of diverse bifunctional electrocatalysts based on noble metals, nonprecious metals, and metal-free nanocarbons, for overall water splitting in acidic and alkaline electrolytes, are thoroughly summarized and compared. Next, their application toward hybrid water splitting is also presented, wherein the alternative anodic reactions include sacrificing agents oxidation, pollutants oxidative degradation, and organics oxidative upgrading. Finally, a concise statement on the current challenges and future opportunities of bifunctional electrocatalysts for both overall and hybrid water splitting is presented in the hope of guiding future endeavors in the quest for energy-efficient and sustainable green hydrogen production.

Metal-Organic Frameworks: Direct Synthesis by Organic Acid-Etching and Reconstruction Disclosure as Oxygen Evolution Electrocatalysts

Metal-organic frameworks (MOFs) have emerged as promising oxygen evolution reaction (OER) electrocatalysts. Chemically bonded MOFs on supports are desirable yet lacking in routine synthesis, as they may allow variable structural evolution and the underlying structure-activity relationship to be disclosed. Herein, direct MOF synthesis is achieved by an organic acid-etching strategy (AES). Using π-conjugated ferrocene (Fc) dicarboxylic acid as the etching agent and organic ligand, a series of MFc-MOF (M=Ni, Co, Fe, Zn) nanosheets are synthesized on the metal supports. The crystal structure is studied using X-ray diffraction and low-dose transmission electron microscopy, which is quasi-lattice-matched with that of the metal, enabling in situ MOF growth. Operando Raman and attenuated total reflectance Fourier transform infrared spectroscopy disclose that the NiFc-MOF features dynamic structural rebuilding during OER. The reconstructed one showing optimized electronic structures with an upshifted total d-band center, high M-O bonding state occupancy, and localized electrons on adsorbates indicated by density functional theory calculations, exhibits outstanding OER performance with a fairly low overpotential (130 mV at 10 mA cm-2 ) and good stability (144 h). The newly established approach for direct MOF synthesis and structural reconstruction disclosure stimulate the development of more prudent catalysts for advancing OER.

Engineering Zinc-Organic Frameworks-Based Artificial Carbonic Anhydrase with Ultrafast Biomimetic Centers for Efficient Hydration Reactions

Constructing effective and robust biocatalysts with carbonic anhydrase (CA)-mimetic activities offers an alternative and promising pathway for diverse CO2-related catalytic applications. However, there is very limited success has been achieved in controllably synthesizing CA-mimetic biocatalysts. Here, inspired by the 3D coordination environments of CAs, this study reports on the design of an ultrafast ZnN3-OH2 center via tuning the 3D coordination structures and mesoporous defects in a zinc-dipyrazolate framework to serve as new, efficient, and robust CA-mimetic biocatalysts (CABs) to catalyze the hydration reactions. Owing to the structural advantages and high similarity with the active center of natural CAs, the double-walled CAB with mesoporous defects displays superior CA-like reaction kinetics in p-NPA hydrolysis (V0 = 445.16 nM s-1, Vmax = 3.83 µM s-1, turnover number: 5.97 × 10-3 s-1), which surpasses the by-far-reported metal-organic frameworks-based biocatalysts. This work offers essential guidance in tuning 3D coordination environments in artificial enzymes and proposes a new strategy to create high-performance CA-mimetic biocatalysts for broad applications, such as CO2 hydration/capture, CO2 sensing, and abundant hydrolytic reactions.

Precise Anchoring of Fe Sites by Regulating Crystallinity of Novel Binuclear Ni-MOF for Revealing Mechanism of Electrocatalytic Oxygen Evolution

Bimetallic metal-organic framework (BMOF) exhibits better electrocatalytic performance than mono-MOF, but deciphering the precise anchoring of foreign atoms and revealing the underlying mechanisms at the atomic level remains a major challenge. Herein, a novel binuclear NiFe-MOF with precise anchoring of Fe sites is synthesized. The low-crystallinity (LC)-NiFe0.33 -MOF exhibited abundant unsaturated active sites and demonstrated excellent electrocatalytic oxygen evolution reaction (OER) performance. It achieved an ultralow overpotential of 230 mV at 10 mA cm-2 and a Tafel slope of 41 mV dec-1 . Using a combination of modulating crystallinity, X-ray absorption spectroscopy, and theoretical calculations, the accurate metal sequence of BMOF and the synergistic effect of the active sites are identified, revealing that the adjacent active site plays a significant role in regulating the catalytic performance of the endmost active site. The proposed model of BMOF electrocatalysts facilitates the investigation of efficient OER electrocatalysts and the related catalytic mechanisms.

Lattice oxygen activation and local electric field enhancement by co-doping Fe and F in CoO nanoneedle arrays for industrial electrocatalytic water oxidation

Oxygen evolution reaction (OER) is critical to renewable energy conversion technologies, but the structure-activity relationships and underlying catalytic mechanisms in catalysts are not fully understood. We herein demonstrate a strategy to promote OER with simultaneously achieved lattice oxygen activation and enhanced local electric field by dual doping of cations and anions. Rough arrays of Fe and F co-doped CoO nanoneedles are constructed, and a low overpotential of 277 mV at 500 mA cm-2 is achieved. The dually doped Fe and F could cooperatively tailor the electronic properties of CoO, leading to improved metal-oxygen covalency and stimulated lattice oxygen activation. Particularly, Fe doping induces a synergetic effect of tip enhancement and proximity effect, which effectively concentrates OH- ions, optimizes reaction energy barrier and promotes O2 desorption. This work demonstrates a conceptual strategy to couple lattice oxygen and local electric field for effective electrocatalytic water oxidation.

Sulfonated vitamin K3 mediated bimetallic metal-organic framework for multistage augmented cancer therapy

Chemodynamic therapy (CDT) relying on Fenton reaction has emerged as a promising strategy for tumor treatment. However, its clinical efficacy is hindered by the inadequate reactive oxygen species (ROS) and the potential cytotoxicity towards normal cells. To address these challenges, we have successfully developed a multistage augmented cancer therapy system based on bimetallic metal-organic framework (BMOF) that amplifies ROS and facilitates tumor-specific therapeutic effects. By employing a simple one-pot self-assembly approach, we synthesized SVK3@ZnCo-ZIF in which sulfonated vitamin K3 (SVK3) was encapsulated within ZnCo-ZIF BMOF. The results revealed that the incorporation of Zn atoms significantly diluted the Fenton activity of Co atoms towards normal cells. Notably, SVK3@ZnCo-ZIF underwent pH-controlled decomposition triggered by the tumor microenvironment (TME), thus releasing SVK3, Co2+ and Zn2+. Specifically, the H2O2 levels in tumors was effectively elevated by the interaction of SVK3 with NAD(P)H quinone oxidoreductase-1 (NQO-1). It thus enhanced the Fenton activity of Co2+. Moreover, the release of Zn2+ ions can induce cellular dysfunction and mitochondrial damage, thereby promoting the generation of ROS and subsequent cell death. The synergistic combination of CDT, SVK3 chemotherapy, and Zn2+-interfered therapy greatly facilitated apoptosis of tumor cells. Collectively, our investigations demonstrate the efficacy of such system in selectively inducing toxicity in cancer cells while minimizing detrimental effects on normal cells.

Metal-Organic-Framework-Based Nanoarrays for Oxygen Evolution Electrocatalysis

The development of highly active and stable electrode materials for the oxygen evolution reaction (OER) is essential for the widespread application of electrochemical energy conversion systems. In recent years, various metal-organic frameworks (MOFs) with self-supporting array structures have been extensively studied because of their high porosity, abundant metal sites, and flexible and adjustable structures. This review provides an overview of the recent progress in the design, preparation, and applications of MOF-based nanoarrays for the OER, beginning with the introduction of the architectural advantages of the nanoarrays and the characteristics of MOFs. Subsequently, the design principles of robust and efficient MOF-based nanoarrays as OER electrodes are highlighted. Furthermore, detailed discussions focus on the composition, structure, and performance of pristine MOF nanoarrays (MOFNAs) and MOF-based composite nanoarrays. On the one hand, the effects of the two components of MOFs and several modification methods are discussed in detail for MOFNAs. On the other hand, the review emphasizes the use of MOF-based composite nanoarrays composed of MOFs and other nanomaterials, such as oxides, hydroxides, oxyhydroxides, chalcogenides, MOFs, and metal nanoparticles, to guide the rational design of efficient OER electrodes. Finally, perspectives on current challenges, opportunities, and future directions in this research field are provided.

Immersion-Driven Structural Evolution of NiFeS Nanosheets for Efficient Water Splitting

The development of low-cost, highly active, and stable electrocatalytic water-splitting catalysts is crucial to solving the current energy crisis and environmental pollution. Herein, a simple two-step conversion strategy is proposed to successfully prepare NiFeS nanosheet structure catalyst through the "immersion-sulfurization" strategy. The self-supported electrode can be prepared in large quantities due to its simple preparation process. As an active substance, NiFeS can grow directly on the NiFe foam substrate, avoiding the use of adhesives or conductive agents, and directly used as electrodes. The as-obtained NiFeS/NFF-300 displays efficient catalytic activity in electrocatalytic water splitting. The overpotential required for OER of the NiFeS/NFF-300 electrode at a current density of 10 mA cm-2 is 230 mV. The electrode underwent a stability test at 10 mA cm-2 for 24 h, and the overpotential remained essentially unchanged, demonstrating excellent stability. Moreover, NiFeS/NFF-300 exhibits considerable HER performances compared with NiFeC2O4/NFF and NiFe foam. The unique nanosheet structure and the presence of Niδ+ and Ni2+ formed by NiFe foam substrate on the NiFeS surface are responsible for its excellent electrocatalytic activity.

Design of iron oxyhydroxide nanosheets coated on Co species embedded in nanoporous carbon for oxygen evolution reaction

There is still a tremendous challenge in designing environmentally friendly oxygen evolution reaction (OER) catalysts that are inexpensive and high-performing for practical applications. Herein, the self-sacrificing template zeolitic imidazolate framework-67 (ZIF-67) was pyrolyzed under N2 atmosphere to generate Co species embedded in nanoporous carbon (Co-NC). Then, iron oxyhydroxide (FeOOH) was wrapped onto the Co-NC surface via electrodeposition to shape the Co-NC@FeOOH composites. Benefiting from the core-shell structure, high conductivity, and distributed active sites, Co-NC@FeOOH presents distinguished OER performance with a low overpotential (336 mV) at 10 mA cm-2 and small Tafel slope (49.46 mV dec-1). This work furnishes a rosy passage for receiving cost-effective electrocatalysts with high efficiency for OER.

Enhanced CO2 Electroreduction Selectivity toward Ethylene on Pyrazolate-Stabilized Asymmetric Ni-Cu Hybrid Sites

Metal-organic frameworks (MOFs) possess well-defined, designable structures, holding great potential in enhancing product selectivity for electrochemical CO2 reduction (CO2R) through active site engineering. Here, we report a novel MOF catalyst featuring pyrazolate-stabilized asymmetric Ni/Cu sites, which not only maintains structural stability under harsh electrochemical conditions but also exhibits extraordinarily high ethylene (C2H4) selectivity during CO2R. At a cathode potential of -1.3 V versus RHE, our MOF catalyst, denoted as Cu1Ni-BDP, manifests a C2H4 Faradaic efficiency (FE) of 52.7% with an overall current density of 0.53 A cm-2 in 1.0 M KOH electrolyte, surpassing that on prevailing Cu-based catalysts. More remarkably, the Cu1Ni-BDP MOF exhibits a stable performance with only 4.5% reduction in C2H4 FE during 25 h of CO2 electrolysis. A suite of characterization tools─such as high-resolution transmission electron microscopy, X-ray absorption spectroscopy, operando X-ray diffraction, and infrared spectroscopy─and density functional theory calculations collectively reveal that the cubic pyrazolate-metal coordination structure and the asymmetric Ni-Cu sites in the MOF catalyst synergistically facilitate the stable formation of C2H4 from CO2.

Accelerating structure reconstruction to form NiOOH in metal-organic frameworks (MOFs) for boosting the oxygen evolution reaction

Structural reconstruction of electrocatalysts to generate metal hydroxide/oxyhydroxide species is critical for an efficient oxygen evolution reaction (OER), but the controllable regulation of the reconstruction process still remains a challenge. Given the designable nature of metal-organic frameworks (MOFs), herein, we have reported a localized structure disordering strategy to accelerate the structural reconstruction of Ni-BDC to generate NiOOH for boosting the OER. The Ni-BDC nanosheets were modified by Fe3+ and urea to form cracks, which could promote the accessibility of the Ni sites by the electrolyte and thus promote the reconstruction to form NiOOH. In addition, the interaction between Ni2+ and Fe3+ allows the electron flow from Ni2+ to Fe3+, further enhancing the NiOOH generation. As a result, the optimized sample exhibits excellent OER activity with a small overpotential of 251 mV at 10 mA cm-2, which is superior to most of the MOF-based OER catalysts reported previously. This work provides a controllable strategy to regulate the structural reconstruction for promoting the OER, which could provide important guidance for the development of more efficient OER electrocatalysts.

Defect Engineered Metal-Organic Framework with Accelerated Structural Transformation for Efficient Oxygen Evolution Reaction

Metal-organic frameworks (MOFs) have been increasingly applied in oxygen evolution reaction (OER), and the surface of MOFs usually undergoes structural transformation to form metal oxyhydroxides to serve as catalytically active sites. However, the controllable regulation of the reconstruction process of MOFs remains as a great challenge. Here we report a defect engineering strategy to facilitate the structural transformation of MOFs to metal oxyhydroxides during OER with enhanced activity. Defective MOFs (denoted as NiFc'x Fc1-x ) with abundant unsaturated metal sites are constructed by mixing ligands of 1,1'-ferrocene dicarboxylic acid (Fc') and defective ferrocene carboxylic acid (Fc). NiFc'x Fc1-x series are more prone to be transformed to metal oxyhydroxides compared with the non-defective MOFs (NiFc'). Moreover, the as-formed metal oxyhydroxides derived from defective MOFs contain more oxygen vacancies. NiFc'Fc grown on nickel foam exhibits excellent OER catalytic activity with an overpotential of 213 mV at the current density of 100 mA cm-2 , superior to that of undefective NiFc'. Experimental results and theoretical calculations suggest that the abundant oxygen vacancies in the derived metal oxyhydroxides facilitate the adsorption of oxygen-containing intermediates on active centers, thus significantly improving the OER activity.

A Self-Templated Design Approach toward Multivariate Metal-Organic Frameworks for Enhanced Oxygen Evolution

Multivariate metal-organic framework (MOF) is an ideal electrocatalytic material due to the synergistic effect of multiple metal active sites. In this study, a series of ternary M-NiMOF (M = Co, Cu) through a simple self-templated strategy that the Co/Cu MOF isomorphically grows in situ on the surface of NiMOF is designed. Owing to the electron rearrange of adjacent metals, the ternary CoCu-NiMOFs demonstrate the improved intrinsic electrocatalytic activity. At optimized conditions, the ternary Co3 Cu-Ni2 MOFs nanosheets give the excellent oxygen evolution reaction (OER) performance of current density of 10 mA cm-2 at low overpotential of 288 mV with a Tafel slope of 87 mV dec-1 , which is superior to that of bimetallic nanosheet and ternary microflowers. The low free energy change of potential-determining step identifies that the OER process is favorable at Cu-Co concerted sites along with strong synergistic effect of Ni nodes. Partially oxidized metal sites also reduce the electron density, thus accelerating the OER catalytic rate. The self-templated strategy provides a universal tool to design multivariate MOF electrocatalysts for highly efficient energy transduction.

Self-Reconstructed Two-Dimensional Cluster-Based Co-Organic Layer Heterojunctions for Enhanced Oxygen Evolution Reactions

When it comes to an efficient catalytic oxygen evolution reaction (OER) in the production of renewable energy and chemicals, the construction of heterogeneous structures is crucial to break the linear scalar relationship of a single catalyst. This heterogeneous structure construction helps creatively achieve high activity and stability. However, the synthesis process of heterogeneous crystalline materials is often complex and challenging to capture and reproduce, which limits their application. Here, the dynamic process of structural changes in Co-MOFs in alkali was captured by in situ powder X-ray diffraction, FT-IR spectroscopy, and Raman spectroscopy, and several self-reconfigured MOF heterogeneous materials with different structures were stably isolated. The created β-Co(OH)2/Co-MOF heterojunction structure facilitates rapid mass-charge transfer and exposure of active sites, which significantly enhanced OER activity. Experimental results show that this heterogeneous structure achieves a low overpotential of 333 mV at 10 mA cm-2. The findings provide new insights and directions for the search for highly reactive cobalt-based MOFs for sustainable energy technologies.