Chemomechanically Stable Small Single-crystal Mo-doped LiNi0.6 Co0.2 Mn0.2 O2 Cathodes for Practical 4.5 V-class Pouch-type Li-ion Batteries

Dynamic Evolution of Antisite Defect and Coupling Anionic Redox in High-Voltage Ultrahigh-Ni Cathode

High-voltage ultrahigh-Ni cathodes (LiNixCoyMn1-x-yO2, x≥0.9) can significantly enhance the energy density and cost-effectiveness of Li-ion batteries beyond current levels. However, severe Li-Ni antisite defects and their undetermined dynamic evolutions during high-voltage cycling limit the further development of these ultrahigh-Ni cathodes. In this study, we quantify the dynamic evolutions of the Li-Ni antisite defect using operando neutron diffraction and reveal its coupling relationship with anionic redox, another critical challenge restricting ultrahigh-Ni cathodes. We detect a clear Ni migration coupled with an unstable oxygen lattice, which accompanies the oxidation of oxygen anions at high voltages. Based on these findings, we propose that minimized Li-Ni antisite defects and controlled Ni migrations are essential for achieving stable high-voltage cycling structures in ultrahigh-Ni cathodes. This is further demonstrated by the optimized ultrahigh-Ni cathode, where reduced dynamic evolutions of the Li-Ni antisite defect effectively inhibit the anionic redox, enhancing the 4.5 V cycling stability.

Doping Effects on Ternary Cathode Materials for Lithium-Ion Batteries: A Review

The ongoing advancements in lithium-ion battery technology are pivotal in propelling the performance of modern electronic devices and electric vehicles. Amongst various components, the cathode material significantly influences the battery performance, such as the specific capacity, capacity retention and the rate performance. Ternary cathode materials, composed of nickel, manganese, and cobalt (NCM), offer a balanced combination of these traits. Recent developments focus on elemental doping, which involves substituting a fraction of NCM constituent ions with alternative cations such as aluminum, titanium, or magnesium. This strategic substitution aims to enhance structural stability, increase capacity retention, and improve resistance to thermal runaway. Doped ternary materials have shown promising results, with improvements in cycle life and operational safety. However, the quest for optimal doping elements and concentrations persists to maximize performance while minimizing cost and environmental impact, ensuring the progression towards high-energy-density, durable, and safe battery technologies.

Chelated Metal-Organic Frameworks for Improved the Performance of High-Nickel Cathodes in Lithium-Ion Batteries

Lithium-ion batteries have gained widespread use in various applications, including portable devices, electric vehicles, and energy storage systems. High Ni cathode, LiNixCoyMnzO2 (NCM, x≥0.8, x+y+z=1), have garnered significant attention owing to their high energy density. However, the limited Li-ion transfer rate and transition metal cross-talk to anode pose obstacles to further improvement of electrochemical performance. To tackle these challenges, metal-organic frameworks (MOFs) with chelating agents are employed as additive materials for electrode. MOFs with chelating agents offer three key attributes: (1) Effective mitigation of transition metal cross-talk to the anode, (2) Partial desolvation of Li+ ions through MOF pores, and (3) Immobilization of anions via metal sites in the MOF. Leveraging these advantages, the chelating MOF-modified NCM cathode demonstrates reduced charge transfer resistance, both in their pristine and cycled states. In addition, they exhibit significantly improved the Li-ion diffusion coefficients after 100 cycles. These findings underscore the potential of MOFs with chelating agents as promising additive materials for enhancing the performance of LIBs.

High-entropy doping promising ultrahigh-Ni Co-free single-crystalline cathode toward commercializable high-energy lithium-ion batteries

The development of advanced layered Ni-rich cathodes is essential for high-energy lithium-ion batteries (LIBs). However, the prevalent Ni-rich cathodes are still plagued by inherent issues of chemomechanical and thermal instabilities and limited cycle life. For this, here, we introduce an efficient approach combining single-crystalline (SC) design with in situ high-entropy (HE) doping to engineer an ultrahigh-Ni cobalt-free layered cathode of LiNi0.88Mn0.03Mg0.02Fe0.02Ti0.02Mo0.02Nb0.01O2 (denoted as HE-SC-N88). Thanks to the SC- and HE-doping merits, HE-SC-N88 is featured with a grain-boundary-free and stabilized structure with minimal lattice strain, preventing mechanical degradation, reducing surface parasitic reactions, and mitigating oxygen loss. Accordingly, our HE-SC-N88 cathode demonstrates exceptional electrochemical properties particularly with prolonged cycling stability under strenuous conditions in both half and full cells, and the delayed O loss-induced phase transitions upon heating. More meaningfully, our design of HE doping in redefining the ultrahigh-Ni Co-free SC cathodes will make a tremendous progress toward industrial application of next-generation LIBs.

Reinforcing the Adsorption and Conversion of Polysulfides in Li-S Battery by Incorporating Molybdenum into MnS/MnO Nanorods

The Sabatier principle suggests that an excessive adsorption of lithium polysulfides (LiPSs) by metal compounds may hinder their conversion in the absence of a conversion module. Therefore, it is imperative to establish a synergetic effect mechanism between "strong adsorption" and "rapid conversion" for LiPSs. To achieve this coexistence, a molybdenum-doped MnS/MnO@C porous structure is designed as a multifunctional coating on the polypropylene (PP) separator. The incorporation of MnS/MnO@C enhances the adsorption capacity towards LiPSs, while molybdenum facilitates subsequent conversion. Benefiting from the synergistic effect of each component and its large specific surface area, the cell with Mo-doped MnS/MnO@C coating achieves smooth adsorption-diffusion-conversion processes and exhibits an appreciable rate performance with outstanding cycling stability. Even when sulfur loading increases to 9.68 mg cm-2 , the modified battery delivers an excellent initial areal capacity of 11.69 mAh cm-2 and maintains 6.97 mAh cm-2 after 50 cycles at 0.1 C. This study presents a promising approach to simultaneously accomplish "strong adsorption" and "rapid conversion" of polysulfides, offering novel perspectives for devising dual-functional modified separators.

Enhancing the reversibility of the chemical evolution of the Ni-rich LiNi0.8Co0.1Mn0.1O2 cathode via a simple pre-oxidation process

For developing commercially viable LiNi1-x-yMnxCoyO2 (NCM), it is necessary to alleviate the irreversible chemical process upon Li-ion insertion/extraction, which primarily accounts for prevailing capacity loss, impedance buildup as well as low columbic efficiency. To resolve this issue, we herein propose a simple but novel method to alter the chemical composition by a facile treatment of H2O2, which remarkably reduces the cation mixing of Li+/Ni2+ and residual lithium on the cathode. The tailored composition contributes great resistance to the structural reconstruction and enhancement in structural reversibility, as shown by in situ Raman and high-resolution transmission electron microscope (HRTEM) results. Thus, the modified sample outperforms the pristine one; it exhibits cyclability with 95.7% capacity retention over 300 cycles, high columbic efficiency and enhanced rate capability.

Grain-growth Inhibitor with Three-section-sintering for Highly Dispersed Single-crystal NCM90 Cubes

Single crystallization of LiNix Coy Mn1-x-y O2 (NCM) is currently an effective strategy to improve the cycling life of NCM cathode, owing to the reduced surface area and enhanced mechanical strength, but the application of single crystal NCM(SC-NCM) is being hindered by severe particle agglomeration and poor C-rate performance. Here, a strategy of three-section-sintering(TSS) with the presence of grain-growth inhibitor was proposed, in which, the TSS includes three sections of phase-formation, grain-growth and phase-preservation. While, the addition of MoO3 inhibits the grain growth and restrains the particle agglomeration. With the help of TSS and 1 mol % of MoO3 , highly dispersed surface Mo-doped SC-NCM(MSC-NCM) cubes are obtained with the average diameter of 1.3 μm. Benefiting from the surface Mo-doping and the reduced surface energy, the Li+ -migration preferred (1 0 4) crystalline facet is exposed as the dominant plane in MSC-NCM cubes, because of which, C-rate performance is significantly improved compared with the regular SC-NCM. Furthermore, this preparation strategy is compatible well with the current industrial production line, providing an easy way for the large-scale production of SC-NCM.

Effects of Multiple Ion Reactions Based on a CoSe2 /MXene Cathode in Aluminum-Ion Batteries

Rechargeable aluminum-ion batteries (RAIBs) have emerged as a promising battery storage technology owing to their cost-effectiveness, operational safety, and high energy density. However, their actual capacity is substantially lower than their true capacity and their cycling stability is poor. Therefore, understanding the energy-storage mechanism may contribute to the successful design of a stable electrode material, on which the performance can be optimized. The aim of this study is to investigate AlCl₄ ^- ions in transition metal cathode materials and mechanisms that enable for their high-energy-storage potential and low Coulombic efficiency. Results of theoretical analysis and experimental verification show that a multi-ion transport mechanism is responsible for the electrochemical behavior of the battery. The lattice distortion of CoSe₂ caused by AlCl₄ ^- ion intercalation, has a considerable effect on the initial stability of the battery. MXene as a support material reduces the size of CoSe₂ growing on its surface, effectively inhibiting the lattice distortion caused by the interaction with the aluminum-anion complex, thus addressing the issues of poor reversibility, cycle instability, and low Coulombic efficiency of the battery. Hence, understanding the impact of MXene on the battery may aid in further improving the design of electrode materials.