Hydrogen Bond Networks Stabilized High-Capacity Organic Cathode for Lithium-Ion Batteries

Phosphorus and nitrogen supramolecule for fabricating flame-retardant, transparent and robust polyvinyl alcohol film

Supramolecular flame retardants have attracted increasing attention recently due to their simple and eco-friendly preparation process. In this study, a novel flame retardant HEPFR was prepared using supramolecular self-assembly technology between piperazine and 1-hydroxy ethylidene-1,1-diphosphonic acid (HEDP). It was introduced into polyvinyl alcohol (PVA) matrix to form PVA/HEPFR composite film. Subsequently, the transparency, mechanical properties, thermal stability, and flame retardancy of PVA/HEPFR films were studied. Due to the hydrogen bonded cross-linked network structure between PVA and HEPFR, the mechanical properties of PVA/HEPFR films have been improved, while maintaining good transparency. With 10 wt% addition of HEPFR, PVA films can reach the VTM-0 level in UL-94 testing. And the limiting oxygen index can be increased from 18.5% of pure PVA to 26.5%. The peak heat release rate was reduced by 61.5%. The flame retardancy and thermal stability of PVA/HEPFR films have been greatly improved. This study provides a "one stone, three birds" strategy for preparing flame-retardant, transparent, and robust PVA film.

Revealing Hydrogen Bond Effect in Rechargeable Aqueous Zinc-Organic Batteries

The surrounding hydrogen bond (H-bond) interaction around the active sites plays indispensable functions in enabling the organic electrode materials (OEMs) to fulfill their roles as ion reservoirs in aqueous zinc-organic batteries (ZOBs). Despite important, there are still no works could fully shed its real effects light on. Herein, quinone-based small molecules with a H-bond evolution model has been rationally selected to disclose the regulation and equilibration of H-bond interaction between OEMs, and OEM and the electrolyte. It has been found that only a suitable H-bond interaction could make the OEMs fully liberate their potential performance. Accordingly, the 2,5-diaminocyclohexa-2,5-diene-1,4-dione (DABQ) with elaborately designed H-bond structure exhibits a capacity of 193.3 mAh g-1 at a record-high mass loading of 66.2 mg cm-2 and 100 % capacity retention after 1500 cycles at 5 A g-1. In addition, the DABQ//Zn battery also possesses air-rechargeable ability by utilizing the chemistry redox of proton. Our results put forward a specific pathway to precise utilization of H-bond to liberate the performance of OEMs.

Electropolymerization of Donor-Acceptor Conjugated Polymer for Efficient Dual-Ion Storage

Rationally designed organic redox-active materials have attracted numerous interests due to their excellent electrochemical performance and reasonable sustainability. However, they often suffer from poor cycling stability, intrinsic low operating potential, and poor rate performance. Herein, a novel Donor-Acceptor (D-A) bipolar polymer with n-type pyrene-4,5,9,10-tetraone unit storing Li cations and p-type carbazole unit which attracts anions and provides polymerization sites is employed as a cathode for lithium-ion batteries through in situ electropolymerization. The multiple redox reactions and boosted kinetics by the D-A structure lead to excellent electrochemical performance of a high discharge capacity of 202 mA h g-1 at 200 mA g-1, impressive working potential (2.87 and 4.15 V), an outstanding rate capability of 119 mA h g-1 at 10 A g-1 and a noteworthy energy density up to 554 Wh kg-1. This strategy has significant implications for the molecule design of bipolar organic cathode for high cycling stability and high energy density.

A Rhombic 2D Conjugated Metal-Organic Framework as Cathode for High-Performance Sodium-Ion Battery

2D conjugated metal-organic frameworks (2D c-MOFs) have garnered significant attention as promising electroactive materials for energy storage. However, their further applications are hindered by low capacity, limited cycling life, and underutilization of the active sites. Herein, Cu-TBA (TBA = octahydroxyltetrabenzoanthracene) with large conjugation units (narrow energy gap) and a unique rhombus topology is introduced as the cathode material for sodium-ion batteries (SIBs). Notably, Cu-TBA with a rhombus topology exhibits a high specific surface area (613 m2 g-1) and metallic band structure. Additionally, Cu-TBA outperforms its hexagonal counterpart, Cu-HHTP (HHTP = 2,3,6,7,10,11-hexahydroxyltriphenylene), demonstrating superior reversible capacity (153.6 mAh g-1 at 50 mA g-1) and outstanding cyclability with minimal capacity decay even after 3000 cycles at 1 A g-1. This work elucidates a new strategy to enhance the electrochemical performance of 2D c-MOFs cathode materials by narrowing the energy gap of organic linkers, effectively expanding the utilization of 2D c-MOFs for SIBs.

Electrolyte-Induced Morphology Evolution to Boost Potassium Storage Performance of Perylene-3,4,9,10-tetracarboxylic Dianhydride

Organic materials have attracted extensive attention for potassium-ion batteries due to their flexible structure designability and environmental friendliness. However, organic materials generally suffer from unavoidable dissolution in aprotic electrolytes, causing an unsatisfactory electrochemical performance. Herein, we designed a weakly solvating electrolyte to boost the potassium storage performance of perylene-3,4,9,10-tetracarboxylic dianhydride (PTCDA). The electrolyte induces an in situ morphology evolution and achieves a nanowire structure. The weakly dissolving capability of ethylene glycol diethyl ether-based electrolyte and unique nanowire structure effectively avoid the dissolution of PTCDA. As a result, PTCDA shows excellent cycling stability (a capacity retention of 89.1% after 2000 cycles) and good rate performance (70.3 mAh g-1 at 50C). In addition, experimental detail discloses that the sulfonyl group plays a key role in inducing morphology evolution during the charge/discharge process. This work opens up new opportunities in electrolyte design for organic electrodes and illuminates further developments of potassium-ion batteries.

Ultra-Thin Hydrogen-Organic-Framework (HOF) Nanosheets for Ultra-Stable Alkali Ions Battery Storage

Organic frameworks-based batteries with excellent physicochemical stability and long-term high capacity will definitely reduce the cost, carbon emissions, and metal consumption and contamination. Here, an ultra-stable and ultra-thin perylene-dicyandiamide-based hydrogen organic framework (HOF) nanosheet (P-DCD) of ≈3.5 nm in thickness is developed. When applied in the cathode, the P-DCD exhibits exceptional long-term capacity retention for alkali-ion batteries (AIBs). Strikingly, for lithium-ion batteries (LIBs), at current of 2 A g-1, the large reversible capacity of 108 mA h g-1 shows no attenuation within 5 000 cycles. For sodium-ion batteries (SIBs), the related capacity retains 91.7% within 10 000 cycles compared to the initial state, significantly much more stable than conventional organic materials reported previously. Mechanism studies through ex situ and in situ experiments and theoretical density functional theory (DFT) calculations reveal that the impressive long-term performance retention originates from the large electron delocalization, fast ion diffusion, and physicochemical stability within the ultra-thin 2D P-DCD, featuring π-π and hydrogen bonding stacking, nitrogen-rich units, and low impedance. The advantageous features demonstrate that rationally designed stable and effective organic frameworks pave the way to utilizing complete organic materials for developing next-generation low-cost and highly stable energy storage batteries.

Organocatalyst Supported by a Single-Atom Support Accelerates both Electrodes used in the Chlor-Alkali Industry via Modification of Non-Covalent Interactions

Consuming one of the largest amount of electricity, the chlor-alkali industry supplies basic chemicals for society, which mainly consists of two reactions, hydrogen evolution (HER) and chlorine evolution reaction (CER). Till now, the state-of-the-art catalyst applied in this field is still the dimensional stable anode (DSA), which consumes a large amount of noble metal of Ru and Ir. It is thus necessary to develop new types of catalysts. In this study, an organocatalyst anchored on the single-atom support (SAS) is put forward. It exhibits high catalytic efficiency towards both HER and CER with an overpotential of 21 mV and 20 mV at 10 mA cm-2 . With this catalyst on both electrodes, the energy consumption is cut down by 1.2 % compared with the commercial system under industrial conditions. Based on this novel catalyst and the high activity, the mechanism of modifying non-covalent interaction is demonstrated to be reliable for the catalyst's design. This work not only provides efficient catalysts for the chlor-alkali industry but also points out that the SACs can also act as support, providing new twists for the development of SACs and organic molecules in the next step.

Nanofiber-Reinforced Composite Gel Enabling High Ionic Conductivity and Ultralong Cycle Life for Zn Ion Batteries

Despite the impressive merits of gel electrolytes for aqueous Zn-ion batteries, it remains a significant challenge to design and develop the gel electrolyte with high ionic conductivity, excellent dimensional stability, and long cycle life. Herein, a composite electrolyte (PTP) with thermolastic polyurethane -poly(m-phenylene isophthalamide)  nanofiber-reinforced polyvinyl alcohol gel strategy is proposed for highly reversible Zn plating/stripping. Mechanically robust and ultrathin PTP contains functional groups for building ion migration channels and immobilizing water molecules, which accelerates Zn2+ migration and mitigates water-related side reactions. Thus, the Zn anodes exhibit excellent electrochemical performance involving high cycling stability (6500 h at 5 mA cm-2 , 5 mA h cm-2 ) and achieving an exceptional cumulative capacity of more than 16 000 mA h cm-2 . This enhancement is well maintained when combined with MnO2 cathode. This work provides a reasonable solution for stabilizing Zn anodes and also provides new ideas for the modification of nanofiber-reinforced gel electrolytes.

Long Cycle Life for Rechargeable Lithium Battery using Organic Small Molecule Dihydrodibenzo[c,h][2,6]naphthyridine-5,11-dione as a Cathode after Isoindigo Pigment Isomerization

Sustainability and adaptability in structural design of the organic cathodes present promises for applications in alkali metal ion batteries. Nevertheless, a formidable challenge lies in their high solubility in organic electrolytes, particularly for small molecular materials, impeding cycling stability and high capacity. This study focuses on the design and synthesis of organic small molecules, the isomers of (E)-5,5'-difluoro-[3,3'-biindolinylidene]-2,2'-dione (EFID) and 3,9-difluoro-6,12-dihydrodibenzo [c, h][2,6]naphthyridine-5,11-dione (FBND). While EFID, characterized by a less π-conjugated structure, exhibits subpar cycling stability in lithium-ion batteries (LIBs), intriguingly, another isomer, FBND, demonstrates exceptional capacity and cycling stability in LIBs. FBND delivers a remarkable capacity of 175 mAh g-1 at a current density of 0.05 A g-1 and maintains excellent cycling stability over 2000 cycles, retaining 90% of its initial capacity. Furthermore, an in-depth examination of redox reactions and storage mechanisms of FBND are conducted. The potential of FBND is also explored as an anode in lithium-ion batteries (LIBs) and as a cathode in sodium-ion batteries (SIBs). The FBND framework, featuring extended π-conjugated molecules with an imide structure compared to EFID, proves to be an excellent material template to develop advanced organic small molecular cathode materials for sustainable batteries.

Synergetic Coupling of Redox-Active Sites on Organic Electrode Material for Robust and High-Performance Sodium-Ion Storage

Organic electrode materials (OEMs), valued for their sustainability and structural tunability, have been attracting increasing attention for wide application in sodium-ion batteries (SIBs) and other rechargeable batteries. However, most OEMs are plagued with insufficient specific capacity or poor cycling stability. Therefore, it's imperative to enhance their specific capacity and cycling stability through molecular design. Herein, we designed and synthesized a heteroaromatic molecule 2,3,8,9,14,15-hexanol hexaazatrinaphthalene (HATN-6OH) by the synergetic coupling of catechol (the precursor of ortho-quinone)/ortho-quinone functional groups and HATN conjugated core structures. The abundance of catechol/ortho-quinone and imine redox-active moieties delivers a high specific capacity of nine-electron transfer for SIBs. Most notably, the π-π interactions and intermolecular hydrogen bond forces among HATN-6OH molecules secure the stable long-term cycling performance of SIBs. Consequently, the as-prepared HATN-6OH electrode exhibited a high specific capacity (554 mAh g-1 at 0.1 A g-1 ), excellent rate capability (202 mAh g-1 at 10 A g-1 ), and stable long-term cycling performance (73 % after 3000 cycles at 10 A g-1 ) in SIBs. Additionally, the nine-electron transfer mechanism is confirmed by systematic density functional theory (DFT) calculation, attenuated total reflection Fourier transform infrared spectroscopy (ATR-FTIR), and Raman analysis. The achievement of the synergetic coupling of the redox-active sites on OEMs could be an important key to the enhancement of SIBs and other metal-ion batteries.

Stable quasi-solid-state lithium-organic battery based on composite gel polymer electrolyte and compatible organic cathode material

High-performance organic small-molecule electrode materials are troubled with their high solubility in liquid electrolytes. The construction of quasi-solid-state lithium organic batteries (LOBs) using gel polymer electrolytes with high mechanical properties, compromised ionic conductivity, high safety, and eco-friendly is an effective way to inhibit the dissolution of active materials. Herein, two hexaazatriphenylene (HATN)-based organic cathode materials (HATNA-6OCH3 and HATNA-6OH) are synthesized and then matched with polyvinylidene fluoride-hexafluoropropylene (PVDF-HFP)-based gel polymer electrolytes to construct quasi-solid-state LOBs. Thanks to the enhanced interfacial compatibility between organic cathode material and gel polymer electrolyte, HATNA-6OH with compatible hydroxyl group shows the enhanced electrochemical properties compared with HATNA-6OCH3. Further, the electrochemical performance is improved when HATNA-6OH is combined with a gel polymer electrolyte modified with a succinonitrile (SN) plasticizer (GPE-0.4SN), including a high specific capacity of 153.3 mAh g-1 at 50 mA g-1 and a good reversible capacity of 88 mAh g-1 after 100 cycles at 200 mA g-1. In addition, the good electrochemical properties and lithium-ion storage mechanism of HATNA-6OH have been elucidated using density functional theory (DFT) and spectral characterizations.

Investigation of Weak Noncovalent Interactions Directed by the Amino Substituent of Pyrido- and Pyrimido-[1,2-a]benzimidazole-8,9-diones

Quinones are small redox-active molecules that are able to form intra- and intermolecular interactions both in the solid state and in solution. On the basis of 6-amino-substituted pyrido- and pyrimido-[1,2-a]benzimidazole-8,9-diones, weak interactions were investigated by single-crystal X-ray and 1H NMR spectroscopy methods. Crystallization of quinone derivatives containing a -NH-CH2- fragment led to the formation of both chiral and achiral crystals. The presence of two forms with (endo form) and without (exo form) an intramolecular hydrogen bond was experimentally detected by X-ray crystallography analysis and variable-temperature (VT) 1H NMR experiments in the cases of isopentylamino- and benzylamino-substituted derivatives. Interestingly, the exo form dominates both in the solid state and in solution.

Efficient catalytic conversion of CO2 to quinazoline-2,4(1H,3H)-diones by a dual-site anion-functionalized ionic liquid: reconsidering the mechanism

In order to elucidate the reaction mechanism of ionic liquid-catalyzed CO2 with 2-aminobenzonitrile, [P4442]2[Hy] with two N- sites is designed for the efficient preparation of quinazoline-2,4(1H,3H)-diones. The results show that [Hy]2- can activate 2-aminobenzonitrile by hydrogen bonding with -NH2 in addition to activating CO2, and the key intermediate is revealed.

Hydrogen-bonded Complex-based Frameworks for Stable Lithium Storage

Metal-complex-based materials for lithium storage have attracted great interest due to their highly designable structures with multiple active sites and well-defined lithium transport pathways. Their cycling and rate performances, however, are still constrained by structural stability and electrical conductivity. Herein, we present two hydrogen-bonded complex-based frameworks with excellent lithium storage capability. Multiple hydrogen bonds among the mononuclear molecules result in three-dimensional frameworks that are stable in electrolyte. The origin of the remarkable lithium storage performance of this family was revealed through kinetic analysis and DFT calculations.