De-Linker-Enabled Exceptional Volumetric Acetylene Storage Capacity and Benchmark C2 H2 /C2 H4 and C2 H2 /CO2 Separations in Metal-Organic Frameworks

Two Stable Pillar-Layered Zn-LMOFs for Highly Fluorescence Sensing of Inorganic Pollutants and Nitro Aromatic Compounds in Water

Luminescent metal-organic frameworks (LMOFs) are a potential class of functional materials for the photoluminescent detection of a wide range of analytes as well as for the detection of pollutants in wastewater. Herein, by using the pillar-layered strategy, two new luminescence Zn-LMOFs (JLU-MOF222 and JLU-MOF223) were successfully solvothermal synthesized. The 2D layers are both consisting of Zn2+ and TPHC [TPHC = (1,1':2',1″-terphenyl)-3,3″,4,4',4″,5'-hexacarboxylic acid] ligands and then pillared by the different N-donor ligands to form the 3D Zn-LMOFs with fsh topology. Benefiting from the uncoordinated carboxylate sites, uncoordinated N atom, or -NH2 group in the pillaring ligands and excellent stability in pH = 2-13 aqueous phase, JLU-MOF222 and JLU-MOF223 not only can sensitively detect trace amounts of inorganic pollutants (Fe3+, Cr2O72-) and nitro aromatic compounds TNP and 2,4-DNP (TNP = 2,4,6- trinitrophenol, 2,4-DNP = 2,4-dinitrophenol) through luminescence quenching but also exhibit high selectivity of other anti-interference competing analytes. The two new Zn-LMOFs can be used as potential luminescent sensors for pollutant detection in water due to their high KSV and low limit of detection (LOD).

Ultrastable Carboxyl-Functionalized Pore-Space-Partitioned Metal-Organic Frameworks for Gas Separation

Isoreticular chemistry, which enables property optimization by changing compositions without changing topology, is a powerful synthetic strategy. One of the biggest challenges facing isoreticular chemistry is to extend it to ligands with strongly coordinating substituent groups such as unbound -COOH, because competitive interactions between such groups and metal ions can derail isoreticular chemistry. It is even more challenging to have an isoreticular series of carboxyl-functionalized MOFs capable of encompassing chemically disparate metal ions. Here, with the simultaneous introduction of carboxyl functionalization and pore space partition, a family of carboxyl-functionalized materials is developed in diverse compositions from homometallic Cr3+ and Ni2+ to heterometallic Co2+/V3+, Ni2+/V3+, Co2+/In3+, Co2+/Ni2+. Cr-MOFs remain highly crystalline in boiling water. Unprecedentedly, one Cr-MOF can withstand the treatment cycle with 10m NaOH and 12m HCl, allowing reversible inter-conversion between unbound -COOH acid form and -COO- base form. These materials exhibit excellent sorption properties such as high uptake capacity for CO2 (100.2 cm3 g-1) and hydrocarbon gases (e.g., 142.1 cm3 g-1 for C2H2, 110.5 cm3 g-1 for C2H4) at 1 bar and 298K, high benzene/cyclohexane selectivity (up to ≈40), and promising separation performance for gas mixtures such as C2H2/CO2 and C2H2/C2H4.

A Scalable Ultramicroporous Coordination Network for Ethylene Separation from the Quaternary Mixture

Adsorptive ethylene separation from the C2H2/C2H4/C2H6/CO2 four-component gas mixture provides a low-energy input solution for industrial ethylene purification, yet it is still a great challenge. Herein, we report a facile scaled-up synthesis of a stable ultramicroporous coordination network of Zn-CO3-datz (Hdatz = 3,5-diamine-1,2,4-triazole), which enables selective adsorption of C2H2, C2H4 and CO2 over C2H4, thanks to its specific pore environment supported by GCMC simulation of gas adsorption sites. Dynamic breakthrough experiments exhibited efficient one-step production of polymer-grade (≥99.95%) C2H4 from the quaternary C2H4/C2H2/C2H6/CO2 (1/1/1/1) mixture, with excellent C2H4 productivity of 0.12 mol kg-1 at 298 K. Moreover, it can be easily synthesized in kilogram scale with an affordable and low-cost ligand, rendering its further potential industrial applications.

A Pillar[5]arene-Containing Metal-Organic Framework for Rapid and Highly Capable Adsorption of a Mustard Gas Simulant

Mustard gas causes irreversible damage upon inhalation or contact with the human body. Consequently, the development of adsorbents for effective interception of mustard gas at low concentrations and high flow rates is an urgent necessity. Here we report a stable porous pillar[5]arene-containing metal-organic framework (MOF) based on zirconium (EtP5-Zr-scu), demonstrating that embedding pillar[5]arene units in MOFs can provide specific binding sites for efficient adsorption of a mustard gas simulant, 2-chloroethyl ethyl sulfide (CEES). EtP5-Zr-scu achieves a higher capacity and more rapid adsorption compared to its counterpart without embedded pillar[5]arene units (H4tcpt-Zr-scu) and perethylated pillar[5]arene (EtP5) alone. Single crystal X-ray diffraction and solid-state nuclear magnetic resonance reveal that the enhanced performance of EtP5-Zr-scu is derived from the host-guest complexation between CEES and pillar[5]arene moieties. Moreover, breakthrough experiments confirmed that the interception performance of EtP5-Zr-scu against CEES (800 ppm, 120 mL/min) was significantly improved (566 min/g) compared with H4tcpt-Zr-scu (353 min/g) and EtP5 (0.873 min/g), attributed to the integration of open channels with specific recognition sites. This work marks a significant advancement in the development of macrocycle-incorporated crystalline framework materials with recognition sites for the efficient capture of guest molecules.

Precise Pore Engineering of Zirconium Metal-Organic Cages for One-Step Ethylene Purification from Ternary Mixtures

One-step purification of ethylene from ternary mixtures (C2H2, C2H4, and C2H6) can greatly reduce the energy consumption of the separation process, but it is extremely challenging. Herein, we use crystal engineering and reticular chemistry to introduce unsaturated bonds (ethynyl and alkyne) into ligands, and successfully design and synthesized two novel Zr-MOCs (ZrT-1-ethenyl and ZrT-1-alkyne). The introduction of carbon-carbon unsaturated bonds provides abundant adsorption sites within the framework while modulating the pore window size. Comprehensive characterization techniques including single crystal and powder X-ray diffraction, as well as electrospray ionization time-of-flight mass spectrometry (ESI-TOF-MS) confirm that ZrT-1-ethenyl and ZrT-1-alkyne possess an isostructural framework with ZrT-1 and ZrT-1-Me, respectively. Adsorption isotherms and breakthrough experiments combined with theoretical calculations demonstrate that ZrT-1-ethenyl can effectively remove trace C2H2 and C2H6 in C2H4 and achieve separation of C2H2 from C2H4 and CO2. ZrT-1-ethenyl can also directly purify C2H4 in liquid solutions. This work provides a benchmark for MOCs that one-step purification of ethylene from ternary mixtures.

Green and Scalable Preparation of an Isomeric CALF-20 Adsorbent with Tailored Pore Size for Molecular Sieving of Propylene from Propane

Molecular sieving of propylene (C3H6) from propane (C3H8) is highly demanded for C3H6 purification. However, delicate control over aperture size to achieve both high C3H6 uptake and C3H6/C3H8 selectivity with low cost remains a significant challenge. Herein, a green and scalable approach is reported for preparing an isomeric CALF-20 adsorbent, termed as NCU-20, using water as the only solvent with a cost of $10 per kilogram. NCU-20 features a contracted pore size (4.2 × 4.7 Å2) compared to CALF-20 (5.2 × 5.7 Å2), which enables molecular sieving of C3H6 (4.16 × 4.65 Å2) from C3H8 (4.20 × 4.80 Å2). Notably, NCU-20 exhibits record-high C3H6 adsorption capacity (94.41 cm3 cm-3) at 298 K and 1.0 bar, outperforming all C3H6/C3H8 molecular sieving adsorbents. The sieving performances of C3H6/C3H8 are well maintained at elevated temperatures. Therefore, a delicate balance between C3H6 adsorption capacity (91.62 cm3 cm-3) and C3H6/C3H8 selectivity (uptake ratio of 22.2) is obtained on NCU-20 at 298 K and 0.5 bar. Furthermore, dynamic breakthrough experiments demonstrate a high productivity of 65.39 cm3 cm-3 for high-purity C3H6 (>99.5%) from an equimolar C3H6/C3H8 gas-mixture.

Extra-High CO2 Adsorption and Controllable C2H2/CO2 Separation Regulated by the Interlayer Stacking in Pillar-Layered Metal-Organic Frameworks

Pillar-layered metal-organic frameworks (PLMOFs) are promising gas adsorbents due to their high designability. In this work, high CO2 storage capacity as well as controllable C2H2/CO2 separation ability are acquired by rationally manipulating the interlayer stacking in pillar-layered MOF materials. The rational construction of pillar-layered MOFs started from the 2D Ni-BTC-pyridine layer, an isomorphic structure of pioneering MOF-1 reported in 1995. The replacement of terminal pyridine groups by bridging pyrazine linkers under optimized solvothermal conditions led to three 3D PLMOFs with different stacking types between adjacent Ni-BTC layers, named PLMOF 1 (ABAB stacking), PLMOF 2 (AABB stacking), and PLMOF 3 (AAAA stacking). Regulated by the layer arrangements, CO2 and C2H2 adsorption capacities (273 K and 1 bar) of PLMOFs 1-3 vary from 173.0/153.3, 185.0/162.4, to 203.5/159.5 cm3 g-1, respectively, which surpass the values of most MOF adsorbents. Dynamic breakthrough experiments further indicate that PLMOFs 1-3 have controllable C2H2/CO2 separation performance, which can successfully overcome the C2H2/CO2 separation challenge. Specially, PLMOFs 1-3 can remove trace CO2 (3%) from the C2H2/CO2 mixture and produce high-purity ethylene (99.9%) in one step with the C2H2 productivities of 1.68, 2.45, and 3.30 mmol g-1, respectively. GCMC simulations indicate that the superior CO2 adsorption and unique C2H2/CO2 separation performance are mainly ascribed to different degrees of CO2 agglomeration in the ultramicropores of these PLMOFs.

Tailorable Multi-Modular Pore-Space-Partitioned Vanadium Metal-Organic Frameworks for Gas Separation

Currently, few porous vanadium metal-organic frameworks (V-MOFs) are known and even fewer are obtainable as single crystals, resulting in limited information on their structures and properties. Here this work demonstrates remarkable promise of V-MOFs by presenting an extensible family of V-MOFs with tailorable pore geometry and properties. The synthesis leverages inter-modular synergy on a tri-modular pore-partitioned platform. New V-MOFs show a broad range of structural features and sorption properties suitable for gas storage and separation applications for C2H2/CO2, C2H6/C2H4, and C3H8/C3H6. The c/a ratio of the hexagonal cell, a measure of pore shape, is tunable from 0.612 to 1.258. Other tunable properties include pore size from 5.0 to 10.9 Å and surface area from 820 to 2964 m2 g-1. With C2H2/CO2 selectivity from 3.3 to 11 and high uptake capacity for C2H2 from 65.2 to 182 cm3 g-1 (298K, 1 bar), an efficient separation is confirmed by breakthrough experiments. The near-record high uptake for C2H6 (166.8 cm3 g-1) contributes to the promise for C2H6-selective separation of C2H6/C2H4. The multi-module pore expansion enables transition from C3H6-selective to more desirable C3H8-selective separation with extraordinarily high C3H8 uptake (254.9 cm3 g-1) and high separation potential (1.25 mmol g-1) for C3H8/C3H6 (50:50 v/v) mixture.

A Zeolitic Octahedral Metal Oxide with Ultrahigh Porosity for High-temperature and High-humidity Alkyne/Alkene Separation

Zeolitic octahedral metal oxide is a newly synthesized all-inorganic zeolitic material and has been used for adsorption, separation, and catalysis. Herein, a new zeolitic octahedral metal oxide was synthesized and characterized. The porous framework was established through the assembly of [P2Mo13O50] clusters with PO4 linkers. Guest molecules occupied the framework, which could be removed through heat treatment, thereby opening the micropores. The pore characteristics were controlled by the cations within the micropore, enabling the adjustment of the interactions with alkynes and alkenes. This resulted in good separation performance of ethylene/acetylene and propylene/propyne even under high temperature and humidity conditions. The high stability of the material enabled the efficient recovery and reuse without discernible loss in the separation performance. Due to the relatively weak interaction between the adsorbed alkyne and the framework, the adsorbent facilitated the recovery of a highly pure alkyne. This feature enhances the practical applicability of the material in various industrial processes.

In situ generated 2,5-pyrazinedicarboxylate and oxalate ligands leading to a Eu-MOF for selective capture of C2H2 from C2H2/CO2

The separation of C2H2/CO2 mixtures is a very important but highly challenging task due to their comparable physical natures and relative sizes. Herein, we report a europium-based 3D microporous MOF with a 4-connected two-nodal net with {4·53·62}2{42·62·82} topology, {[Eu2(pzdc)(ox)2(H2O)4]·5H2O}n (1) (H2pzdc = 2,5-pyrazinedicarboxylic acid, H2ox = oxalic acid), prepared by a hydrothermal method involving in situ generation of 2,5-pyrazinedicarboxylate and oxalate ligands. Two different temperatures were utilized to create two porous materials (1a and 1b) with channels of 4.8 × 5.4 Å and 4.1 × 6.3 Å, and 4.8 × 5.4 and 4.6 × 8.7 Å2, respectively. 1b shows a superior ability to selectively capture C2H2 from C2H2/CO2 as compared with 1a. At 1 bar and 298 K, 1b takes up 4.10 mmol g-1 C2H2 and 1.84 mmol g-1 CO2, respectively. In addition, at 298 K and 1 bar, 1b has a high selectivity for C2H2 over CO2, with an IAST selectivity of 12.7 while the value for 1a is 3.2. The separation of C2H2/CO2 with 1b also exhibits good reusability.

General and Scalable Synthesis of Mesoporous 2D MZrO2 (M = Co, Mn, Ni, Cu, Fe) Nanocatalysts by Amorphous-to-Crystalline Transformation

In modern heterogeneous catalysis, it remains highly challenging to create stable, low-cost, mesoporous 2D photo-/electro-catalysts that carry atomically dispersed active sites. In this work, a general shape-preserving amorphous-to-crystalline transformation (ACT) strategy is developed to dope various transition metal (TM) heteroatoms in ZrO2, which enabled the scalable synthesis of TMs/oxide with a mesoporous 2D structure and rich defects. During the ACT process, the amorphous MZrO2 nanoparticles (M = Fe, Ni, Cu, Co, Mn) are deposited within a confined space created by the NaCl template, and they transform to crystalline 2D ACT-MZrO2 nanosheets in a shape-preserving manner. The interconnected crystalline ACT-MZrO2 nanoparticles thus inherit the same structure as the original MZrO2 precursor. Owing to its rich active sites on the surface and abundant oxygen vacancies (OVs), ACT-CoZrO2 gives superior performance in catalyzing the CO2-to-syngas conversion as demonstrated by experiments and theoretical calculations. The ACT chemistry opens a general route for the scalable synthesis of advanced catalysts with precise microstructure by reconciliating the control of crystalline morphologies and the dispersion of heteroatoms.

Recent Advances in Electrocatalytic Hydrogenation Reactions on Copper-Based Catalysts

Hydrogenation reactions play a critical role in the synthesis of value-added products within the chemical industry. Electrocatalytic hydrogenation (ECH) using water as the hydrogen source has emerged as an alternative to conventional thermocatalytic processes for sustainable and decentralized chemical synthesis under mild conditions. Among the various ECH catalysts, copper-based (Cu-based) nanomaterials are promising candidates due to their earth-abundance, unique electronic structure, versatility, and high activity/selectivity. Herein, recent advances in the application of Cu-based catalysts in ECH reactions for the upgrading of valuable chemicals are systematically analyzed. The unique properties of Cu-based catalysts in ECH are initially introduced, followed by design strategies to enhance their activity and selectivity. Then, typical ECH reactions on Cu-based catalysts are presented in detail, including carbon dioxide reduction for multicarbon generation, alkyne-to-alkene conversion, selective aldehyde conversion, ammonia production from nitrogen-containing substances, and amine production from organic nitrogen compounds. In these catalysts, the role of catalyst composition and nanostructures toward different products is focused. The co-hydrogenation of two substrates (e.g., CO2 and NOx n, SO3 2-, etc.) via C─N, C─S, and C─C cross-coupling reactions are also highlighted. Finally, the critical issues and future perspectives of Cu-catalyzed ECH are proposed to accelerate the rational development of next-generation catalysts.

Supramolecular Interactions Induce Dynamics in Metal-Organic Layers to Selectively Separate Acetylene from Carbon Dioxide

We report the synthesis and structural characterization of a 2D metal-organic framework with AB-packing layers, [Co2(pybz)2(CH3COO)2]·DMF (Co2, pybz= 4-(4-pyridyl)benzoate), containing a stable (4,4)-grid network fabricated by paddle-wheel nodes, ditopic pybz, and acetate ligands. After removal of the guest, the layer structure is retained but reorganized into an ABCD packing mode in the activated phase (Co2a). Consequently, the intralayer square windows (7.2 × 5.0 Å2) close, while the interlayer separation is decreased slightly from 3.69 to 3.45 Å, leaving a narrow gap. Importantly, the dangling methyl group of the acetate with H-bonds to the adjacent layers and also the well-distributed π-π interactions between the aromatic rings of neighboring layers facilitate the structural stability. These weak supramolecular interactions further allow for favorable dynamic exfoliation of the layers, which promotes efficient adsorption of C2H2 (41.6 cm3 g-1) over CO2 with an adsorption ratio of 6.3 (0.5 bar, 298 K). The effective separation performance of equimolar C2H2/CO2 was verified by cycling breakthrough experiments and was even tolerable to moisture (R.H = 52%). DFT calculations, in situ PXRD, and PDF characterization reveal that the favorable retention of C2H2 rather than that of CO2 is due to its H-bond formation with the paddle-wheel oxygen atoms that triggers the increase in interlayer separation during C2H2 adsorption.

Dinuclear Copper Sulfate-Based Square Lattice Topology Network with High Alkyne Selectivity

Porous coordination networks (PCNs) sustained by inorganic anions that serve as linker ligands can offer high selectivity toward specific gases or vapors in gas mixtures. Such inorganic anions are best exemplified by electron-rich fluorinated anions, e.g., SiF62-, TiF62-, and NbOF52-, although sulfate anions have recently been highlighted as inexpensive and earth-friendly alternatives. Herein, we report the use of a rare copper sulfate dimer molecular building block to generate two square lattice, sql, coordination networks which can be prepared via solvent layering or slurrying, CuSO4(1,4-bib)1.5, 1, (1,4-bib = 1,4-bisimidazole benzene) and CuSO4(1,4-bin)1.5, 2, (1,4-bin = 1,4-bisimidazole naphthalene). Variable-temperature SCXRD and PXRD experiments revealed that both sql networks underwent reversible structural transformations due to linker rotations or internetwork displacements. Gas sorption studies conducted upon the narrow-pore phase of CuSO4(1,4-bin)1.5, 2np, found a high calculated 1:99 selectivity for C2H2 over C2H4 (33.01) and CO2 (15.18), as well as strong breakthrough performance. Across-the-board, C3H4 selectivity vs C3H6, CO2, and C3H8 was also observed. Sulfate-based PCNs, although still understudied, appear increasingly likely to offer utility in gas and vapor separations.

Isoreticular Contraction of Cage-like Metal-Organic Frameworks with Optimized Pore Space for Enhanced C2H2/CO2 and C2H2/C2H4 Separations

The C2H2 separation from CO2 and C2H4 is of great importance yet highly challenging in the petrochemical industry, owing to their similar physical and chemical properties. Herein, the pore nanospace engineering of cage-like mixed-ligand MFOF-1 has been accomplished via contracting the size of the pyridine- and carboxylic acid-functionalized linkers and introducing a fluoride- and sulfate-bridging cobalt cluster, based on a reticular chemistry strategy. Compared with the prototypical MFOF-1, the constructed FJUT-1 with the same topology presents significantly improved C2H2 adsorption capacity, and selective C2H2 separation performance due to the reduced cage cavity size, functionalized pore surface, and appropriate pore volume. The introduction of fluoride- and sulfate-bridging cubane-type tetranuclear cobalt clusters bestows FJUT-1 with exceptional chemical stability under harsh conditions while providing multiple potential C2H2 binding sites, thus rendering the adequate ability for practical C2H2 separation application as confirmed by the dynamic breakthrough experiments under dry and humid conditions. Additionally, the distinct binding mechanism is suggested by theoretical calculations in which the multiple supramolecular interactions involving C-H···O, C-H···F, and other van der Waals forces play a critical role in the selective C2H2 separation.

Microporous Coordination Polymers for Efficient Recovery of Chloromethane from Organic Silicon Industrial Exhaust Gas

Removal and recovery of methyl chloride (CH3Cl) from exhaust gas of organic silicon industry is highly important from the perspective of environment and economy. For the first time, a tailor-made microporous coordination polymer (Mn-BDC-TPA) was synthesized and applied to the efficient capture and recovery of CH3Cl from related gas mixtures. The high adsorption capacity of CH3Cl (163.4 cm3/g) and high adsorption selectivity of CH3Cl over other impurity gases (1965 for N2, 65 for CH4, and 16 for C2H6) were achieved at 298 K and 100 kPa due to the dual-cage pore system and larger polarizability of CH3Cl. Dynamic breakthrough experiments demonstrate the excellent CH3Cl recovery performance (capacity of >98 cm3/g and purity of >95%) in one adsorption-desorption cycle from the CH3Cl-involved binary, ternary, or quaternary gas mixture.

Maximizing Electrostatic Interaction in Ultramicroporous Metal-Organic Frameworks for the One-Step Purification of Acetylene from Ternary Mixture

Developing efficient adsorbents for acetylene purification from multicomponent mixtures is of critical significance in the chemical industry, but the trade-off between regenerability and selectivity significantly restricts practical industrial applications. Here, we report ultramicroporous metal-organic frameworks with acetylene-affinity channels to enhance electrostatic interaction between C2H2 and frameworks for the efficient one-step purification of C2H2 from C2H2/CO2/C2H4 mixtures, in which the electrostatic interaction led to high regenerability. The obtained SNNU-277 exhibits significantly higher adsorption capacity for C2H2 than that for both C2H4 and CO2 at 298 K and 0.1 bar, while an ultrahigh selectivity of C2H2/C2H4 (100.6 at 298 K) and C2H2/CO2 (32.8 at 298 K) were achieved at 1 bar. Breakthrough experiments validated that SNNU-277 can efficiently separate C2H2 from C2H2/C2H4/CO2 mixtures. CO2 and C2H4 broke through the adsorption column at 4 and 14.8 min g-1, whereas C2H2 was detected until 177.6 min g-1 at 298 K. Theoretical calculations suggest that the framework is electrostatically compatible with C2H2 and electrostatically repels C2H4 and CO2 in the mixed components. This work highlights the importance of rational pore engineering for maximizing the electrostatic effect with the preferentially absorbed guest molecule for efficient multicomponent separation.

Crystal Engineering of a New Hexafluorogermanate Pillared Hybrid Ultramicroporous Material Delivers Enhanced Acetylene Selectivity

Hybrid ultramicroporous materials (HUMs), metal-organic platforms that incorporate inorganic pillars, are a promising class of porous solids. A key area of interest for such materials is gas separation, where HUMs have already established benchmark performances. Thanks to their ready compositional modularity, we report the design and synthesis of a new HUM, GEFSIX-21-Cu, incorporating the ligand pypz (4-(3,5-dimethyl-1H-pyrazol-4-yl)pyridine, 21) and GeF62- pillaring anions. GEFSIX-21-Cu delivers on two fronts: first, it displays an exceptionally high C2H2 adsorption capacity (≥5 mmol g-1) which is paired with low uptake of CO2 (<2 mmol g-1), and, second, a low enthalpy of adsorption for C2H2 (ca. 32 kJ mol-1). This combination is rarely seen in the C2H2 selective physisorbents reported thus far, and not observed in related isostructural HUMs featuring pypz and other pillaring anions. Dynamic column breakthrough experiments for 1:1 and 2:1 C2H2/CO2 mixtures revealed GEFSIX-21-Cu to selectively separate C2H2 from CO2, yielding ≥99.99% CO2 effluent purities. Temperature-programmed desorption experiments revealed full sorbent regeneration in <35 min at 60 °C, reinforcing HUMs as potentially technologically relevant materials for strategic gas separations.

Water-stable metal-organic frameworks (MOFs): rational construction and carbon dioxide capture

Metal-organic frameworks (MOFs) are considered to be a promising porous material due to their excellent porosity and chemical tailorability. However, due to the relatively weak strength of coordination bonds, the stability (e.g., water stability) of MOFs is usually poor, which severely inhibits their practical applications. To prepare water-stable MOFs, several important strategies such as increasing the bonding strength of building units and introducing hydrophobic units have been proposed, and many MOFs with excellent water stability have been prepared. Carbon dioxide not only causes a range of climate and health problems but also is a by-product of some important chemicals (e.g., natural gas). Due to their excellent adsorption performances, MOFs are considered as a promising adsorbent that can capture carbon dioxide efficiently and energetically, and many water-stable MOFs have been used to capture carbon dioxide in various scenarios, including flue gas decarbonization, direct air capture, and purified crude natural gas. In this review, we first introduce the design and synthesis of water-stable MOFs and then describe their applications in carbon dioxide capture, and finally provide some personal comments on the challenges facing these areas.

Hydrogen bond unlocking-driven pore structure control for shifting multi-component gas separation function

Purification of ethylene (C2H4) as the most extensive and output chemical, from complex multi-components is of great significance but highly challenging. Herein we demonstrate that precise pore structure tuning by controlling the network hydrogen bonds in two highly-related porous coordination networks can shift the efficient C2H4 separation function from C2H2/C2H4/C2H6 ternary mixture to CO2/C2H2/C2H4/C2H6 quaternary mixture system. Single-crystal X-ray diffraction revealed that the different amino groups on the triazolate ligands resulted in the change of the hydrogen bonding in the host network, which led to changes in the pore shape and pore chemistry. Gas adsorption isotherms, adsorption kinetics and gas-loaded crystal structure analysis indicated that the coordination network Zn-fa-atz (2) weakened the affinity for three C2 hydrocarbons synchronously including C2H4 but enhanced the CO2 adsorption due to the optimized CO2-host interaction and the faster CO2 diffusion, leading to effective C2H4 production from the CO2/C2H2/C2H4/C2H6 mixture in one step based on the experimental and simulated breakthrough data. Moreover, it can be shaped into spherical pellets with maintained porosity and separation performance.

Anionic Ni-Based Metal-Organic Framework with Li(I) Cations in the Pores for Efficient C2H2/CO2 Separation

Acetylene (C2H2) is widely used as a raw material for producing various downstream commodities in the petrochemical and electronic industry. Therefore, the acquisition of high-purity C2H2 from a C2H2/CO2 mixture produced by partial methane combustion or thermal hydrocarbon cracking is of great significance yet highly challenging due to their similar physical and chemical properties. Herein, we report an anionic metal-organic framework (MOF) named LIFM-210, which has Li+ cations in the pores and shows a higher adsorption affinity for C2H2 than CO2. LIFM-210 is constructed by a unique tetranuclear Ni(II) cluster acting as a 10-connected node and an organic ligand acting as a 5-connected node. Single-component adsorption and transient breakthrough experiments demonstrate the good C2H2 selective separation performance of LIFM-210. Theoretical calculations revealed that Li+ ions strongly prefer C2H2 to CO2 and are primary adsorption sites, playing vital roles in the selective separation of C2H2/CO2.

Optimizing Sieving Effect for CO2 Capture from Humid Air Using an Adaptive Ultramicroporous Framework

Excessive CO2 in the air can not only lead to serious climate problems but also cause serious damage to humans in confined spaces. Here, a novel metal-organic framework (FJI-H38) with adaptive ultramicropores and multiple active sites is prepared. It can sieve CO2 from air with the very high adsorption capacity/selectivity but the lowest adsorption enthalpy among the reported physical adsorbents. Such excellent adsorption performances can be retained even at high humidity. Mechanistic studies show that the polar ultramicropore is very suitable for molecular sieving of CO2 from N2 , and the distinguishable adsorption sites for H2 O and CO2 enable them to be co-adsorbed. Notably, the adsorbed-CO2 -driven pore shrinkage can further promote CO2 capture while the adsorbed-H2 O-induced phase transitions in turn inhibit H2 O adsorption. Moreover, FJI-H38 has excellent stability and recyclability and can be synthesized on a large scale, making it a practical trace CO2 adsorbent. This will provide a new strategy for developing practical adsorbents for CO2 capture from the air.

Ultra-Microporous and Stable MOFs with Zero-Linker Ligands for Gas Capture and Separation

Zero-linker ligands have maximized the size coordination efficiency of the metal ions in MOF framework which is important in constructing ultra-microporous MOFs with high stability and density, a bridge between zeolites and traditional MOFs. This article highlighted several recently developed ultra-microporous MOFs with zero-linker ligands for gas capture and separation.

Highly Selective Separation of C2H2/CO2 and C2H2/C2H4 in an N-Rich Cage-Based Microporous Metal-Organic Framework

The separation of acetylene (C2H2) from carbon dioxide (CO2) and the purification of ethylene (C2H4) from C2H2 are quite essential processes for the chemical industry. However, these processes are challenging due to their similar physical properties, including molecule sizes and boiling points. Herein, we report an N-rich cage-based microporous metal-organic framework (MOF), [Cd5(Tz)9](NO3) (termed as Cd-TZ, TZ stands for tetrazole), and its highly efficient separation of C2H2/CO2 and C2H2/C2H4. Single-component gas adsorption isotherms reveal that Cd-TZ exhibits high C2H2 adsorption capacity (3.10 mmol g-1 at 298 K and 1 bar). The N-rich cages in Cd-TZ can trap C2H2 with a higher isosteric heat of adsorption (40.8 kJ mol-1) than CO2 and C2H4 owing to the robust host-guest interactions between the noncoordinated N atoms and C2H2, which has been verified by molecular modeling studies. Cd-TZ shows a high IAST selectivity for C2H2/CO2 (8.3) and C2H2/C2H4 (13.3). The breakthrough simulations confirm the potential for separating C2H2/CO2 and the purification of C2H4 from C2H2.