Oxidation-Reduction Molecular Junction Covalent Organic Frameworks for Full Reaction Photosynthesis of H2 O2

Isomerization of Covalent Organic Frameworks for Efficiently Activating Molecular Oxygen and Promoting Hydrogen Peroxide Photosynthesis

Constitutional-isomerized covalent organic frameworks (COFs), constructed by swapping monomers around imine bonds, have attracted attention for their distinct optoelectronic properties, which significantly impact photocatalytic performance. However, limited research has delved into the inherent relationship between isomerization and the enhancement of H2O2 photosynthesis. Herein, a pair of isomeric COFs linked by imine bonds (PB-PT-COF and PT-PB-COF) is synthesized, and it is proved that isomeric COFs exhibit different rate-determining steps in the generation process of H2O2, resulting in a twofold increase in photocatalytic efficiency. Specifically, PT-PB-COF demonstrates effective adsorption and activation of molecular oxygen (O2 + e- → •O2 - + e- → H2O2), leading to a significant improvement in H2O2 photocatalytic efficiency. In contrast, PB-PT-COF exhibits robust interaction with H2O, enabling direct oxidation of H2O (H2O + h+ → H2O2). This study provides a thorough understanding of the intrinsic mechanism underlying the constitutional-isomerized COFs in the photocatalytic H2O2 generation, offering insights for further optimizing building units.

Perfluoroalkyl-modified covalent organic frameworks for continuous photocatalytic hydrogen peroxide synthesis and extraction in a biphasic fluid system

H2O2 photosynthesis represents an appealing approach for sustainable and decentralized H2O2 production. Unfortunately, current reactions are mostly carried out in laboratory-scale single-phase batch reactors, which have a limited H2O2 production rate (<100 μmol h-1) and cannot operate in an uninterrupted manner. Herein, we propose continuous H2O2 photosynthesis and extraction in a biphasic fluid system. A superhydrophobic covalent organic framework photocatalyst with perfluoroalkyl functionalization is rationally designed and prepared via the Schiff-base reaction. When applied in a home-built biphasic fluid photo-reactor, the superhydrophobicity of our photocatalyst allows its selective dispersion in the oil phase, while formed H2O2 is spontaneously extracted to the water phase. Through optimizing reaction parameters, we achieve continuous H2O2 photosynthesis and extraction with an unprecedented production rate of up to 968 μmol h-1 and tunable H2O2 concentrations from 2.2 to 38.1 mM. As-obtained H2O2 solution could satisfactorily meet the general demands of household disinfection and wastewater treatments.

Molecular Engineering of Metal-Organic Frameworks for Boosting Photocatalytic Hydrogen Peroxide Production

The development of novel metal-organic frameworks (MOFs) as efficient photocatalysts for hydrogen peroxide production from water and oxygen is particularly interesting, yet remains a challenge. Herein, we have prepared four cyclic trinuclear units (CTUs) based MOFs, exhibiting good light absorption ability and suitable band gaps for photosynthesis of H2O2. However, Cu-CTU-based MOFs are not able to photocatalyzed the formation of H2O2, while the alteration of metal nodes from Cu-CTU to Ag-CTU dramatically enhances the photocatalytic performance for H2O2 production and the production rates can reach as high as 17476 μmol g-1 h-1 with an apparent quantum yield of 4.72 %, at 420 nm, which is much higher than most reported MOFs. The photocatalytic mechanism is comprehensively studied by combining the isotope labeling experiments and DFT calculation. This study provides new insights into the preparation of MOF photocatalysts with high activity for H2O2 production through molecular engineering.

Dual Channel H2O2 Photosynthesis in Pure Water over S-Scheme Heterojunction Cs3PMo12/CC Boosted by Proton and Electron Reservoirs

Dual channel photo-driven H2O2 production in pure water on small-scale on-site setups is a promising strategy to provide low-concentrated H2O2 whenever needed. This process suffers, however, strongly from the fast recombination of photo-generated charge carriers and the sluggish oxidation process. Here, insoluble Keggin-type cesium phosphomolybdate Cs3PMo12O40 (abbreviated to Cs3PMo12) is introduced to carbonized cellulose (CC) to construct S-scheme heterojunction Cs3PMo12/CC. Dual channel H2O2 photosynthesis from both H2O oxidation and O2 reduction in pure water has been thus achieved with the production rate of 20.1 mmol L-1 gcat. -1 h-1, apparent quantum yield (AQY) of 2.1% and solar-to-chemical conversion (SCC) efficiency of 0.050%. H2O2 accumulative concentration reaches 4.9 mmol L-1. This high photocatalytic activity is guaranteed by unique features of Cs3PMo12/CC, namely, S-scheme heterojunction, electron reservoir, and proton reservoir. The former two enhance the separation of photo-generated charge carriers, while the latter speeds up the torpid oxidation process. In situ experiments reveal that H2O2 is formed via successive single-electron transfer in both channels. In real practice, exposing the reaction system under natural sunlight outdoors successfully results in 0.24 mmol L-1 H2O2. This work provides a key practical strategy for designing photocatalysts in modulating redox half-reactions in photosynthesis.

Novel three-dimensional fibrous covalent organic frameworks constructed via silver amalgam bridging for efficient organic dye adsorption and removal

The construction of covalent organic frameworks (COFs) with unique structures has great significance in exploring the structure-function relationship and extending their potential applications. Fibrous COFs have demonstrated superior performance in specific application scenarios owing to the distinctive three-dimensional (3D) structure. Herein, we report a facile strategy for the fabrication of 3D COF nanofiber by exploiting silver amalgam as a bridging agent to assemble one-dimensional-extended PA-COF modules into a tubular structure. Dimensions of the obtained 3D COF nanofiber were predicted by DFT calculations, and the nanofiber was endowed with the merits of favorable uniformity and high stability. Due to the enhanced exposure of conjugatable binding sites for dye retention offered by the novel 3D architecture, the PA-COF nanofiber exhibits fast adsorption (within 5 min) and superior adsorption capacity to various organic dyes, e.g., 1717 mg g-1 for methylene blue (MB) and 978.3 mg g-1 for methyl orange (MO). Moreover, the PA-COF nanofiber shows excellent reusability in dye adsorption, which makes it a potential medium for removing dye pollutants from wastewater. This work presents an effective strategy to construct COF materials with unique architecture and potential prospects in the fields of separation and wastewater treatment.

Rigid covalent organic frameworks with thiazole linkage to boost oxygen activation for photocatalytic water purification

Owing to their capability to produce reactive oxygen species (ROS) under solar irradiation, covalent organic frameworks (COFs) with pre-designable structure and unique architectures show great potentials for water purification. However, the sluggish charge separation, inefficient oxygen activation and poor structure stability in COFs restrict their practical applications to decontaminate water. Herein, via a facile one-pot synthetic strategy, we show the direct conversion of reversible imine linkage into rigid thiazole linkage can adjust the π-conjugation and local charge polarization of skeleton to boost the exciton dissociation on COFs. The rigid linkage can also improve the robustness of skeleton and the stability of COFs during the consecutive utilization process. More importantly, the thiazole linkage in COFs with optimal C 2p states (COF-S) effectively increases the activities of neighboring benzene unit to directly modulate the O2-adsorption energy barrier and improve the ROS production efficiency, resulting in the excellent photocatalytic degradation efficiency of seven toxic emerging contaminants (e.g. degrading ~99% of 5 mg L-1 paracetamol in only 7 min) and effective bacterial/algal inactivation performance. Besides, COF-S can be immobilized in continuous-flow reactor and in enlarged reactor to efficiently eliminate pollutants under natural sunlight irradiation, demonstrating the feasibility for practical application.

A cyclic trinuclear silver complex for photosynthesis of hydrogen peroxide

The development of metal complexes for photosynthesis of hydrogen peroxide (H2O2) from pure water and oxygen using solar energy, especially in the absence of any additives (e.g., acid, co-catalysts, and sacrificial agents), is a worthwhile pursuit, yet still remains highly challenging. More importantly, the O2 evolution from the water oxidation reaction has been impeded by the classic bottleneck, the photon-flux-density problem of sunlight that could be attributed to rarefied solar radiation for a long time. Herein, we reported synthesis of boron dipyrromethene (BODIPY)-based cyclic trinuclear silver complexes (Ag-CTC), and they exhibited strong visible-light absorption ability, a suitable energy bandgap, excellent photochemical properties and efficient charge separation ability. The integration of BODIPY motifs as oxygen reduction reaction sites and silver ions as water oxidation reaction sites allows Ag-CTC to photosynthesize H2O2 either from pure water or from sea water in the absence of any additives with a high H2O2 production rate of 183.7 and 192.3 μM h-1, which is higher than that of other reported metal-based photocatalysts. The photocatalytic mechanism was systematically and ambiguously investigated by various experimental analyses and density functional theory (DFT) calculations. Our work represents an important breakthrough in developing a new Ag photocatalyst for the transformation of O2 into H2O2 and H2O into H2O2.

Sandwich-structured continuous ZIF-8/Ti3C2 MXene/ZIF-8 for efficient sterilization: Enhanced photocatalytic activity, photothermal effect, and environmental safety

The development of effective water purification systems is crucial for controlling and remediating environmental pollution, especially in terms of sterilization. Herein, we demonstrate elaborately designed composite nanosheets with a sandwich structure, composed of two-dimensional (2D) Ti3C2 MXene nanosheet core and conformal ZIF-8 ultrathin outer layers, and their potential applications in photocatalytic sterilization. The study results indicate that the conformal ZIF-8-MXene nanosheet exhibits an expanded light absorption range (826 nm), improved photothermal conversion efficiency (6.2 °C s-1), and photocurrent response, thus boosting photocatalytic sterilization efficiency (6.63 log10 CFU mL-1) against Escherichia coli under simulated sunlight within 90 min. Interestingly, 2D ZIF-8 layers exhibit positive zeta potential (19 mV), good hydrophilicity (40.6°), and local photogenerated-hole accumulation, possessing efficient bacteria-trapping efficiency. Membrane filters fabricated from optimized composite nanosheets exhibit an outstanding bacteria-trapping and sterilization efficiency (almost 100 %) against Escherichia coli under simulated sunlight within 30 min of the flow photocatalytic experiments. This work not only presents a rational structural design of the conformal and ultrathin anchoring of ZIF-8 onto a 2D conductive material for bacteria-trapping and sterilization, but also opens new opportunities for using metal-organic frameworks in photocatalytic disinfection of drinking water.

Tandem Fields Facilitating Directional Carrier Migration in Van der Waals Heterojunction for Efficient Overall Piezo-Synthesis of H2O2

Piezo-synthesis of H2O2 utilizing sustainable mechanical energy as well as earth-abundant water and oxygen is a green, cost-effective, and promising approach. However, achieving simultaneous two-electron water oxidation reaction (2e- WOR) and two-electron oxygen reduction reaction (2e- ORR) faces huge challenges due to insufficient synergistic active sites and slow/messy carrier transfer. Herein, a novel 2D/2D van der Waals heterojunction consisting of BiOIO3 and carbon nitride (BIO/CN) is elaborately designed for highly efficient overall H2O2 piezo-synthesis. Theoretical/experimental results reveal that a Z-scheme electron transfer is formed and facilitated by the tandem interfacial electric field and the bulk piezo-polarization field. On this basis, the carriers are efficiently separated while the oxidation/reduction capacity is preserved, thus providing the strong driving force for the 2e- WOR and 2e- ORR on BIO and CN, respectively. Furthermore, the kinetic and thermodynamic processes of WOR and ORR for H2O2 synthesis improve remarkably. Therefore, BIO/CN exhibits an excellent H2O2 yield of 259.8 µM within 30 min in pure water and air atmosphere (without any sacrificial agents and aeration). This study provides a new idea on strategically controlling electron transfer toward high-efficiency H2O2 piezo-synthesis and expands the avenue for developing effective environmental purification materials.

Changing Benzoxazole Ring into Nonring Imine Linkages on Covalent Organic Frameworks with Tuning H2O2 Photosynthesis Performance

Two π-conjugated covalent organic frameworks (COFs) with nonring imine or benzoxazole ring linkages were prepared by reacting 3,3'-dihydrooxybenzidine (BDOH) with 3,5-triformylbenzene (Tb) in the presence or absence of benzimidazole (BDOH-Tb-IM and BDOH-Tb-BO). Although two COFs indicated similar composition, crystalline structures, and morphologies, imine-based BDOH-Tb-IM exhibited a photocatalytic H2O2 production rate of 2490 μmol·g-1·h-1 in sacrificial reagent-free pure water, higher than that of benzoxazole-based BDOH-Tb-BO-a (1168 μmol·g-1·h-1). The higher photocatalytic activity of BDOH-Tb-IM was attributed to its more efficient photoinduced charge separation and utilization efficiency and different 2e- ORR active sites over the two COFs. This study demonstrated an available ring effect to adjust photocatalytic performance between π-conjugated COFs.

Leveraging phenazine and dihydrophenazine redox dynamics in conjugated microporous polymers for high-efficiency overall photosynthesis of hydrogen peroxide

Harnessing solar energy for hydrogen peroxide (H2O2) production from water and oxygen is crucial for sustainable solar fuel generation. Conjugated microporous polymers (CMPs), with their vast structural versatility and extended π-conjugation, are promising photocatalysts for solar-driven H2O2 generation, though enhancing their efficiency is challenging. Inspired by the crucial role of phenazine derives in biological redox cycling and electron transfer processes, the redox-active phenazine moiety is rationally integrated into a CMP framework (TPE-PNZ). By leveraging the reversible redox dynamics between phenazine and dihydrophenazine, TPE-PNZ sets a new benchmark for H2O2 production among CMP-based photocatalysts, reaching a production rate of 5142 μmol g-1 h-1 and a solar-to-chemical conversion efficiency of 0.58% without requiring sacrificial agents. This interconversion allows for the storage of photogenerated electrons by phenazine and subsequent conversion into dihydrophenazine, which then reduces O2 to H2O2 while reverting to phenazine, markedly facilitating charge transfer and mitigating charge recombination. Experimental and computational investigations further reveal that this reversible process enhances O2 adsorption and reduction, significantly lowering the energy barrier towards H2O2 formation. This study offers critical insights into designing advanced materials for sustainable energy research.

Constructing Photocatalytic Covalent Organic Frameworks with Aliphatic Linkers

Photocatalytic covalent organic frameworks (COFs) are typically constructed with rigid aromatic linkers for crystallinity and extended π-conjugation. However, the essential hydrophobicity of the aromatic backbone can limit their performances in water-based photocatalytic reactions. Here, we for the first time report the synthesis of hydrophilic COFs with aliphatic linkers [tartaric acid dihydrazide (TAH) and butanedioic acid dihydrazide] that can function as efficient photocatalysts for H2O2 and H2 evolution. In these hydrophilic aliphatic linkers, the specific multiple hydrogen bonding networks not only enhance crystallization but also ensure an ideal compatibility of crystallinity, hydrophilicity, and light harvesting. The resulting aliphatic linker COFs adopt an unusual ABC stacking, giving rise to approximately 0.6 nm nanopores with an improved interaction with water guests. Remarkably, both aliphatic linker-based COFs show strong visible light absorption, along with a narrow optical band gap of ∼1.9 eV. The H2O2 evolution rate for TAH-COF reaches up to 6003 μmol h-1 g-1, in the absence of sacrificial agents, surpassing the performance of all previously reported COF-based photocatalysts. Theoretical calculations reveal that the TAH linker can enhance the indirect two-electron oxygen reduction reaction for H2O2 production by improving the O2 adsorption and stabilizing the *OOH intermediate. This study opens a new avenue for constructing semiconducting COFs using nonaromatic linkers.

Stepwise Protonation of Three-Dimensional Covalent Organic Frameworks for Enhancing Hydrogen Peroxide Photosynthesis

Three-dimensional covalent organic frameworks (3D COFs), recognized for their tailorable structures and accessible active sites, offer a promising platform for developing advanced photocatalysts. However, the difficulty in the synthesis and functionalization of 3D COFs hinders their further development. In this study, we present a series of 3D-bcu-COFs with 8 connected porphyrin units linked by linear linkers through imine bonds as a versatile platform for photocatalyst design. The photoresponse of 3D-bcu-COFs was initially modulated by functionalizing linear linkers with benzo-thiadiazole or benzo-selenadiazole groups. Furthermore, taking advantage of the well-exposed porphyrin and imine sites in 3D-bcu-COFs, their photocatalytic activity was optimized by stepwise protonation of imine bonds and porphyrin centers. The dual protonated COF with benzo-selenadiazole groups exhibited enhanced charge separation, leading to an increased photocatalytic H2O2 production under visible light. This enhancement demonstrates the combined benefits of linker functionalization and stepwise protonation on photocatalytic efficiency.

A Dual-Active Covalent Triazine Framework Film for Efficient Visible-Light-Driven Hydrogen Peroxide Production

Photocatalytic hydrogen peroxide production from water and oxygen offers a clean and sustainable alternative to the conventional energy-intensive anthraquinone oxidation method. Compared to powdered covalent triazine frameworks (CTFs), the film morphology of CTFs provides better connectivity in 2D, yielding several advantages: more efficient connections between active sites, reduced electron-hole pair recombination, increased resistance to superoxide radical induced corrosion, and decreased light scattering. Leveraging these benefits, it has incorporated dual active sites for both the oxygen reduction reaction (ORR) and the water oxidation reaction (WOR) into a CTF film system. This dual-active CTF film demonstrated an exceptional hydrogen peroxide production rate of 19 460 µmol h⁻¹ m⁻2 after 1 h and 17 830 µmol h⁻¹ m⁻2 after 5 h under visible light irradiation (≥420 nm) without the need for sacrificial agents.

Tris(triazolo)triazine-Based Covalent Organic Frameworks for Efficiently Photocatalytic Hydrogen Peroxide Production

Two-dimensional covalent organic frameworks (2D-COFs) have recently emerged as fascinating scaffolds for solar-to-chemical energy conversion because of their customizable structures and functionalities. Herein, two tris(triazolo)triazine-based COF materials (namely COF-JLU51 and COF-JLU52) featuring large surface area, high crystallinity, excellent stability and photoelectric properties were designed and constructed for the first time. Remarkably, COF-JLU51 gave an outstanding H2O2 production rate of over 4200 μmol g-1 h-1 with excellent reusability in pure water and O2 under one standard sun light, that higher than its isomorphic COF-JLU52 and most of the reported metal-free materials, owing to its superior generation, separation and transport of photogenerated carriers. Experimental and theoretical researches prove that the photocatalytic process undergoes a combination of indirect 2e- O2 reduction reaction (ORR) and 4e- H2O oxidation reaction (WOR). Specifically, an ultrahigh yield of 7624.7 μmol g-1 h-1 with apparent quantum yield of 18.2 % for COF-JLU52 was achieved in a 1 : 1 ratio of benzyl alcohol and water system. This finding contributes novel, nitrogen-rich and high-quality tris(triazolo)triazine-based COF materials, and also designate their bright future in photocatalytic solar transformations.

Sub-Nanometer Mono-Layered Metal-Organic Frameworks Nanosheets for Simulated Flue Gas Photoreduction

The dilemma between the thickness and accessible active site triggers the design of porous crystalline materials with mono-layered structure for advanced photo-catalysis applications. Here, a kind of sub-nanometer mono-layered nanosheets (Co-MOF MNSs) through the exfoliation of specifically designed Co3 cluster-based metal-organic frameworks (MOFs) is reported. The sub-nanometer thickness and inherent light-sensitivity endow Co-MOF MNSs with fully exposed Janus Co3 sites that can selectively photo-reduce CO2 into formic acid under simulated flue gas. Notably, the production efficiency of formic acid by Co-MOF MNSs (0.85 mmol g-1 h-1) is ≈13 times higher than that of the bulk counterpart (0.065 mmol g-1 h-1) under a simulated flue gas atmosphere, which is the highest in reported works up to date. Theoretical calculations prove that the exposed Janus Co3 sites with simultaneously available sites possess higher activity when compared with single Co site, validating the importance of mono-layered nanosheet morphology. These results may facilitate the development of functional nanosheet materials for CO2 photo-reduction in potential flue gas treatment.

S-scheme NiO/C3N5 heterojunctions with enhanced interfacial electric field for boosting photothermal-assisted photocatalytic H2 and H2O2 production

Heterostructured visible-light-responsive photocatalysts represent a prospective approach to achieve efficient solar-to-chemical energy conversion. Herein, we propose a facile self-assembly technique to synthesize NiO nanoparticles/C3N5 nanosheets (NOCN) heterojunctions for hydrogen (H2) evolution catalysis and hydrogen peroxide (H2O2) production under visible light. In this regard, the black NiO nanoparticles (NPs) were tightly anchored on the surface of C3N5 nanosheets (CNNS) to construct S-scheme NOCN heterojunction, enabling efficient charge separation and high redox capability. Obtained results elucidated that the incorporated NiO NPs significantly promote light-harvesting efficiency and photo-to-thermal capacity over the NOCN composites. The enhanced photothermal effect facilitates the charge carrier transfer rate across the heterojunction and boosts the surface reaction kinetics. Accordingly, the photocatalytic performances of CNNS for H2 release and H2O2 production can be manipulated by introducing NiO NPs. The modified photocatalytic properties of NOCN composites are ascribed to the synergistic effects of all integrated components and the S-scheme heterojunction formation. Impressively, the high H2 evolution photocatalysis efficiency of NOCN nano-catalysts in seawater certifies their potential environmental applicability. Among all, the 12-NOCN nano-catalyst exhibits a higher photocatalytic efficiency for H2 release (112.2 μmol∙g-1∙h-1) and H2O2 production (91.2 μmol∙L-1∙h-1). Besides, the 12-NOCN nano-catalyst reveals excellent recyclability and structural stability. Additionally, the possible mechanism for photothermal-assisted photocatalysis is proposed. This work affords a feasible pathway to design photothermal-assisted S-scheme heterojunctions for diverse photocatalytic applications.

A photocatalytic redox cycle over a polyimide catalyst drives efficient solar-to-H2O2 conversion

Circumventing the conventional two-electron oxygen reduction pathway remains a great problem in enhancing the efficiency of H2O2 photosynthesis. A promising approach to achieve outstanding photocatalytic activity involves the utilization of redox intermediates. Here, we engineer a polyimide aerogel photocatalyst with photoreductive carbonyl groups for non-sacrificial H2O2 production. Under photoexcitation, carbonyl groups on the photocatalyst surface are reduced, forming an anion radical intermediate. The produced intermediate is oxidized by O2 to produce H2O2 and subsequently restores the carbonyl group. The high catalytic efficiency is ascribed to a photocatalytic redox cycle mediated by the radical anion, which not only promotes oxygen adsorption but also lowers the energy barrier of O2 reduction reaction for H2O2 generation. An apparent quantum yield of 14.28% at 420 ± 10 nm with a solar-to-chemical conversion efficiency of 0.92% is achieved. Moreover, we demonstrate that a mere 0.5 m2 self-supported polyimide aerogel exposed to natural sunlight for 6 h yields significant H2O2 production of 34.3 mmol m-2.

Regulating the Topology of Covalent Organic Frameworks for Boosting Overall H2O2 Photogeneration

Photocatalytic oxygen reduction reactions and water oxidation reactions are extremely promising green approaches for massive H2O2 production. Nonetheless, constructing effective photocatalysts for H2O2 generation is critical and still challenging. Since the network topology has significant impacts on the electronic properties of two dimensional (2D) polymers, herein, for the first time, we regulated the H2O2 photosynthetic activity of 2D covalent organic frameworks (COFs) by topology. Through designing the linking sites of the monomers, we synthesized a pair of novel COFs with similar chemical components on the backbones but distinct topologies. Without sacrificial agents, TBD-COF with cpt topology exhibited superior H2O2 photoproduction performance (6085 and 5448 μmol g-1 h-1 in O2 and air) than TBC-COF with hcb topology through the O2-O2⋅--H2O2, O2-O2⋅--O2 1-H2O2, and H2O-H2O2 three paths. Further experimental and theoretical investigations confirmed that during the H2O2 photosynthetic process, the charge carrier separation efficiency, O2⋅- generation and conversion, and the energy barrier of the rate determination steps in the three channels, related to the formation of *OOH, *O2 1, and *OH, can be well tuned by the topology of COFs. The current study enlightens the fabrication of high-performance photocatalysts for H2O2 production by topological structure modulation.

Pyridine-Based Covalent Organic Frameworks with Pyridyl-Imine Structures for Boosting Photocatalytic H2O2 Production via One-Step 2e- Oxygen Reduction

Bipyridine-based covalent organic frameworks (COFs) have emerged as promising contenders for the photocatalytic generation of hydrogen peroxide (H2O2). However, the presence of imine nitrogen alters the mode of H2O2 generation from an efficient one-step two-electron (2e-) route to a two-step 2e- oxygen reduction pathway. In this work, we introduce 3,3'-bipyridine units into imine-based COF skeletons, creating a pyridyl-imine structure with two adjacent nitrogen atoms between the pyridine ring and imine linkage. This unique bipyridine-like architecture can effectively suppress the two-step 2e- ORR process at the single imine-nitrogen site, facilitating a more efficient one-step 2e- pathway. Consequently, the optimized pyridyl-imine COF (PyIm-COF) exhibits a remarkable H2O2 production rate of up to 5850 μmol h-1 g-1, nearly double that of pristine bipyridine COFs. This work provides valuable insight into the rational design of functionalized COFs for enhanced H2O2 production in photocatalysis.

Redox Molecular Junction Metal-Covalent Organic Frameworks for Light-assisted CO2 Energy Storage

Visible-light sensitive and bi-functionally favored CO2 reduction (CRR)/evolution (CER) photocathode catalysts that can get rid of the utilization of ultraviolet light and improve sluggish kinetics is demanded to conquer the current technique-barrier of traditional Li-CO2 battery. Here, a kind of redox molecular junction sp2c metal-covalent organic framework (i.e. Cu3-BTDE-COF) has been prepared through the connection between Cu3 and BTDE and can serve as efficient photocathode catalyst in light-assisted Li-CO2 battery. Cu3-BTDE-COF with redox-ability, visible-light-adsorption region, electron-hole separation ability and endows the photocathode with excellent round-trip efficiency (95.2 %) and an ultralow voltage hysteresis (0.18 V), outperforming the Schiff base COFs (i.e. Cu3-BTDA-COF and Cu3-DT-COF) and majority of the reported photocathode catalysts. Combined theoretical calculations with characterizations, Cu3-BTDE-COF with the integration of Cu3 centers, thiazole and cyano groups possess strong CO2 adsorption/activation and Li+ interaction/diffusion ability to boost the CRR/CER kinetics and related battery property.

Enhancing Sustainable Energy Conversion Efficiency by Incorporating Photoelectric Responsiveness into Multiporous Ionic Membrane

The evolution of porous membranes has revitalized their potential application in sustainable osmotic-energy conversion. However, the performance of multiporous membranes deviates significantly from the linear extrapolation of single-pore membranes, primarily due to the occurrence of ion-concentration polarization (ICP). This study proposes a robust strategy to overcome this challenge by incorporating photoelectric responsiveness into permselective membranes. By introducing light-induced electric fields within the membrane, the transport of ions is accelerated, leading to a reduction in the diffusion boundary layer and effectively mitigating the detrimental effects of ICP. The developed photoelectric-responsive covalent-organic-framework membranes exhibit an impressive output power density of 69.6 W m-2 under illumination, surpassing the commercial viability threshold by ≈14-fold. This research uncovers a previously unexplored benefit of integrating optical electric conversion with reverse electrodialysis, thereby enhancing energy conversion efficiency.

Efficient Proton Transfer and Charge Separation within Covalent Organic Frameworks via Hydrogen-Bonding Network to Boost H2O2 Photosynthesis

Photocatalytic synthesis based on the oxygen reduction reaction (ORR) has shown great promise for H2O2 production. However, the low activity and selectivity of 2e- ORR result in a fairly low efficiency of H2O2 production. Herein, we propose a strategy to enhance the proton-coupled electron transfer (PCET) process in covalent organic frameworks (COFs), thereby significantly boosting H2O2 photosynthesis. We demonstrated that the construction of a hydrogen-bonding network, achieved by anchoring the H3PO4 molecular network on COF nanochannels, can greatly improve both proton conductivity and photogenerated charge separation efficiency of COFs. Thus, COF@H3PO4 exhibited superior photocatalytic performance in generating H2O2 without sacrificial agents, with a solar-to-chemical conversion efficiency as high as 0.69%. Results indicated that a much more localized spatial distribution of energy band charge density on COF@H3PO4 led to efficient charge separation, and the small energy barrier of the rate-limiting step from *OOH to H2O2 endowed COF@H3PO4 with higher 2e- ORR selectivity.

Enhancing the Activity of a Carbon Nitride Photocatalyst by Constructing a Triazine-Heptazine Homojunction

Establishing homojunctions at the molecular level between different but physicochemically similar phases belonging to the same family of materials is an effective approach to promoting the photocatalytic activity of polymeric carbon nitride (CN) materials. Here, we prepared a CN material with a uniform distribution of homojunctions by combining two synthetic strategies: supramolecular assemblies as the precursor and molten salt as the medium. We designed porous CN rods with triazine-heptazine homojunctions (THCNs) using a melem supramolecular aggregate (Me) and melamine as the precursors and a KCl/LiBr salt mixture as the liquid reaction medium. The triazine/heptazine ratio is controlled by varying the relative amounts of the chosen precursors, and the molten salt treatment enhances the structural order of the interplanar packing units for the THCN skeleton, leading to rapid charge migration. The resulting built-in electric field induced by the triazine-heptazine homojunction enhances photogenerated charge separation; the optimal THCN catalyst exhibits an excellent H2 evolution rate via photocatalytic water splitting, which is ∼24 times as high as that of reference bulk CN, with long-term stability.

Vinyl-Group-Anchored Covalent Organic Framework for Promoting the Photocatalytic Generation of Hydrogen Peroxide

The artificial photosynthesis of H2O2 from water and oxygen using semiconductor photocatalysts is attracting increasing levels of attention owing to its green, environmentally friendly, and energy-saving characteristics. Although covalent organic frameworks (COFs) are promising materials for promoting photocatalytic H2O2 production owing to their structural and functional diversity, they typically suffer from low charge-generation and -transfer efficiencies as well as rapid charge recombination, which restricts their use as catalysts for photocatalytic H2O2 production. Herein, we report a strategy for anchoring vinyl moieties to a COF skeleton to facilitate charge separation and migration, thereby promoting photocatalytic H2O2 generation. This vinyl-group-bearing COF photocatalyst exhibits a H2O2-production rate of 84.5 μmol h-1 (per 10 mg), which is ten-times higher than that of the analog devoid of vinyl functionality and superior to most reported COF photocatalysts. Both experimental and theoretical studies provide deep insight into the origin of the improved photocatalytic performance. These findings are expected to facilitate the rational design and modification of organic semiconductors for use in photocatalytic applications.

Recent developments in photocatalytic production of hydrogen peroxide

Hydrogen peroxide (H2O2), an environmentally friendly strong oxidant and energy carrier, has attracted widespread attention in photocatalysis. Artificial photosynthesis of H2O2 using water and oxygen as raw materials, solar energy as an energy source, and semiconductor materials as catalysts is considered a promising technology. In the past few decades, encouraging progress has been made in the photocatalytic production of H2O2. Therefore, we summarize the research achievements in this field in recent years. This review first briefly introduces the reaction pathway, detection techniques and evaluation metrics. Then, the recent advances in photocatalysts are highlighted. Furthermore, the existing challenges and possible solutions in this field are presented. At last, we look forward to the future development direction of this field. This review provides valuable insights and guidance for efficient photocatalytic H2O2 production.

Enhancing Photosynthesis Efficiency of Hydrogen Peroxide by Modulating Side Chains to Facilitate Water Oxidation at Low-Energy Barrier Sites

Hydrogen peroxide (H2O2) is a crucial oxidant in advanced oxidation processes. In situ, photosynthesis of it in natural water holds the promise of practical application for water remediation. However, current photosynthesis of H2O2 systems primarily relies on oxygen reduction, leading to limited performance in natural water with low dissolved oxygen or anaerobic conditions found in polluted water. Herein, a novel photocatalyst based on conjugated polymers with alternating electron donor-acceptor structures and electron-withdrawing side chains on electron donors is introduced. Specifically, carbazole functions as the electron donor, triazine serves as the electron acceptor, and cyano acts as the electron-withdrawing side chain. Notably, the photocatalyst exhibits a remarkable solar-to-chemical conversion of 0.64%, the highest reported in natural water. Furthermore, even in anaerobic conditions, it achieves an impressive H2O2 photosynthetic efficiency of 1365 µmol g-1 h-1, surpassing all the reported photosynthetic systems of H2O2. This remarkable improvement is attributed to the effective relocation of the water oxidation active site from a high-energy carbazole to a low-energy acetylene site mediated by the side chains, resulting in enhanced O2 or H2O2 generation from water. This breakthrough offers a new avenue for efficient water remediation using advanced oxidation technologies in oxygen-limited environments, holding significant implications for environmental restoration.

3D Crown Ether Covalent Organic Framework as Interphase Layer toward High-Performance Lithium Metal Batteries

The practical application of lithium (Li) metal batteries is inhibited by accumulative Li dendrites and continuous active Li consumption during cycling, which results in a low Coulombic efficiency and short lifetime. Constructing artificial solid-electrolyte interphase (SEI) layer in Li anode, such as 2D covalent organic frameworks (COFs), is an effective strategy to restrain the formation of Li dendrites and improve cycling performance. However, the exploration of 3D COFs as protecting layers is rarely reported, because of the preconception that the interconnect pores in 3D COFs eventually cause Li dendrites in disordered direction. 3D crown ether-based COF with ffc topology as interphase layer, in which the crown ether units are arranged in parallel and vertical orientation along the electrode, is demonstrated. The strong coupling effect between the crown ether and Li+ accelerates Li+ diffusion kinetics and enables homogeneous Li+ flux, resulting in a high Li+ transference number of 0.85 and smooth Li deposition in 3D direction. Li/COF-Cu cells display a lower Li-nucleation overpotential (17.4 mV) and high average Coulombic efficiency of ≈98.6% during 340 cycles with COF incorporation. This work gives a new insight into designing COFs for energy storage systems.

Keto-anthraquinone covalent organic framework for H2O2 photosynthesis with oxygen and alkaline water

Hydrogen peroxide photosynthesis suffers from insufficient catalytic activity due to the high energy barrier of hydrogen extraction from H2O. Herein, we report that mechanochemically synthesized keto-form anthraquinone covalent organic framework which is able to directly synthesize H2O2 (4784 μmol h-1 g-1 at λ > 400 nm) from oxygen and alkaline water (pH = 13) in the absence of any sacrificial reagents. The strong alkalinity resulted in the formation of OH-(H2O)n clusters in water, which were adsorbed on keto moieties within the framework and then dissociated into O2 and active hydrogen, because the energy barrier of hydrogen extraction was largely lowered. The produced hydrogen reacted with anthraquinone to generate anthrahydroquinone, which was subsequently oxidized by O2 to produce H2O2. This study ultimately sheds light on the importance of hydrogen extraction from H2O for H2O2 photosynthesis and demonstrates that H2O2 synthesis is achievable under alkaline conditions.

Construction of a redox pathway through a polyoxometalate and covalent organic framework for H2O2 photosynthesis

A novel type of electron donor-acceptor system was built from a nitrogen-rich covalent organic framework (PC) and a polyoxometalate (BW12), fabricating a composite material (BW12@PC-250), which shows significantly improved photocatalytic H2O2 yield (56.4 μM h-1) under full spectrum illumination in pure water, being about 30 times higher than that of PC. This is due to the opening of the electron and proton transport pathway between PC and BW12, which paves a new way for POMs to modulate the photocatalytic reactions of COFs.

Large-Scale Continuous and In Situ Photosynthesis of Hydrogen Peroxide by Sulfur-Functionalized Polymer Catalyst for Water Treatment

Photocatalytic H2 O2 generation system based on polymer catalyst receives increasing attention in recent years; however, the insufficient charge separation efficiency and low oxygen adsorption/activation capacity severely limit their potential application. In this study, a sulfur (C=S) functionalized polymer catalyst is reported through a green water-mediated and catalyst-free multi-component reactions (MCRs) route. The sulfur functional group endows the polymer with a suitable energy band and facilitates the separation of photogenerated electron-hole pair. The reported polymer achieves a high H2 O2 production efficiency (3132 μmol g-1  h-1 ) in pure water without oxygen aeration. To demonstrate their potential in in situ wastewater treatment, a panel reactor system (20×20 cm) is constructed for large-scale production of H2 O2 , which realizes continuous degradation of emerging pollutants including antibiotics and bisphenol A under natural sunlight irradiation condition. The H2 O2 utilization efficiency of the photo-self-Fenton system using in situ generated H2 O2 is found 7.9 times higher than that of the traditional photo-Fenton system. This study offers new insights in green synthesis and design of functional polymer photocatalyst, and demonstrates the feasibility of panel reactor system for large-scale continuous H2 O2 photocatalytic production and water treatment.

Organic Donor-Acceptor Systems for Photocatalysis

Organic semiconductor materials are considered to be promising photocatalysts due to their excellent light absorption by chromophores, easy molecular structure tuning, and solution-processable properties. In particular, donor-acceptor (D-A) type organic photocatalytic materials synthesized by introducing D and A units intra- or intermolecularly, have made great progress in photocatalytic studies. More and more studies have demonstrated that the D-A type organic photocatalytic materials combine effective carrier separation, tunable bandgap, and sensitive optoelectronic response, and are considered to be an effective strategy for enhancing light absorption, improving exciton dissociation, and optimizing carrier transport. This review provides a thorough overview of D-A strategies aimed at optimizing the photocatalytic performance of organic semiconductors. Initially, essential methods for modifying organic photocatalytic materials, such as interface engineering, crystal engineering, and interaction modulation, are briefly discussed. Subsequently, the review delves into various organic photocatalytic materials based on intramolecular and intermolecular D-A interactions, encompassing small molecules, conjugated polymers, crystalline polymers, supramolecules, and organic heterojunctions. Meanwhile, the energy band structures, exciton dynamics, and redox-active sites of D-A type organic photocatalytic materials under different bonding modes are discussed. Finally, the review highlights the advanced applications of organic photocatalystsand outlines prospective challenges and opportunities.

Ionic Liquid-Mediated Dynamic Polymerization for Facile Aqueous-Phase Synthesis of Enzyme-Covalent Organic Framework Biocatalysts

Utilizing covalent organic framework (COF) as a hypotoxic and porous scaffold to encapsulate enzyme (enzyme@COF) has inspired numerous interests at the intersection of chemistry, materials, and biological science. In this study, we report a convenient scheme for one-step, aqueous-phase synthesis of highly crystalline enzyme@COF biocatalysts. This facile approach relies on an ionic liquid (2 μL of imidazolium ionic liquid)-mediated dynamic polymerization mechanism, which can facilitate the in situ assembly of enzyme@COF under mild conditions. This green strategy is adaptive to synthesize different biocatalysts with highly crystalline COF "exoskeleton", as well evidenced by the low-dose cryo-EM and other characterizations. Attributing to the rigorous sieving effect of crystalline COF pore, the hosted lipase shows non-native selectivity for aliphatic acid hydrolysis. In addition, the highly crystalline linkage affords COF "exoskeleton" with higher photocatalytic activity for in situ production of H2 O2 , enabling us to construct a self-cascading photo-enzyme coupled reactor for pollutants degradation, with a 2.63-fold degradation rate as the poorly crystalline photo-enzyme reactor. This work showcases the great potentials of employing green and trace amounts of ionic liquid for one-step synthesis of crystalline enzyme@COF biocatalysts, and emphasizes the feasibility of diversifying enzyme functions by integrating the reticular chemistry of a COF.

In-situ formatting donor-acceptor polymer with giant dipole moment and ultrafast exciton separation

Donor-acceptor semiconducting polymers present countless opportunities for application in photocatalysis. Previous studies have showcased their advantages through direct bottom-up methods. Unfortunately, these approaches often involve harsh reaction conditions, overlooking the impact of uncontrolled polymerization degrees on photocatalysis. Besides, the mechanism behind the separation of electron-hole pairs (excitons) in donor-acceptor polymers remains elusive. This study presents a post-synthetic method involving the light-induced transformation of the building blocks of hyper-cross-linked polymers from donor-carbon-donor to donor-carbon-acceptor states, resulting in a polymer with a substantial intramolecular dipole moment. Thus, excitons are efficiently separated in the transformed polymer. The utility of this strategy is exemplified by the enhanced photocatalytic hydrogen peroxide synthesis. Encouragingly, our observations reveal the formation of intramolecular charge transfer states using time-resolved techniques, confirming transient exciton behavior involving separation and relaxation. This light-induced method not only guides the development of highly efficient donor-acceptor polymer photocatalysts but also applies to various fields, including organic solar cells, light-emitting diodes, and sensors.

Three-Motif Molecular Junction Type Covalent Organic Frameworks for Efficient Photocatalytic Aerobic Oxidation

Covalent organic frameworks (COFs), with the features of flexible structure regulation and easy introduction of functional groups, have aroused broad interest in the field of photocatalysis. However, due to the low light absorption intensity, low photoelectron conversion efficiency, and lack of suitable active sites, it remains a great challenge to achieve efficient photocatalytic aerobic oxidation reactions. Herein, based on reticular chemistry, we rationally designed a series of three-motif molecular junction type COFs, which formed dual photosensitizer coupled redox molecular junctions containing multifunctional COF photocatalysts. Significantly, due to the strong light adsorption ability of dual photosensitizer units and integrated oxidation and reduction features, the PY-BT COF exhibited the highest activity for photocatalytic aerobic oxidation. Especially, it achieved a photocatalytic benzylamine conversion efficiency of 99.9% in 2.5 h, which is much higher than that of the two-motif molecular junctions with only one photosensitizer or redox unit lacking COFs. The mechanism of selective aerobic oxidation was studied through comprehensive experiments and density functional theory calculations. The results showed that the photoinduced electron transfer occurred from PY and then through triphenylamine to BT. Furthermore, the thermodynamics energy for benzylamine oxidation on PY-BT COF was much lower than that for others, which confirmed the synergistic effect of dual photosensitizer coupled redox molecular junction COFs. This work provided a new strategy for the design of functional COFs with three-motif molecular junctions and also represented a new insight into the multifunctional COFs for organic catalytic reactions.

Efficient Photosynthesis of Hydrogen Peroxide by Cyano-Containing Covalent Organic Frameworks from Water, Air and Sunlight

The insufficient exciton (e- -h+ pair) separation/transfer and sluggish two-electron water oxidation are two main factors limiting the H2 O2 photosynthetic efficiency of covalent organic frameworks (COFs) photocatalysts. Herein, we present an alternative strategy to simultaneously facilitate exciton separation/transfer and reduce the energy barrier of two-electron water oxidation in COFs via a dicyano functionalization. The in situ characterization and theoretical calculations reveal that the dicyano functionalization improves the amount of charge transfer channels between donor and acceptor units from two in COF-0CN without cyano functionalization to three in COF-1CN with mono-cyano functionalization and four in COF-2CN with dicyano functionalization, leading to the highest separation/transfer efficiency in COF-2CN. More importantly, the dicyano group activates the neighbouring C atom to produce the key *OH intermediate for effectively reducing the energy barrier of rate-determining two-electron water oxidation in H2 O2 photosynthesis. The simultaneously enhanced exciton separation/transfer and two-electron water oxidation in COF-2CN result in high H2 O2 yield (1601 μmol g-1  h-1 ) from water and oxygen without using sacrificial reagent under visible-light irradiation. COF-2CN can effectively yield H2 O2 in water with wide pH range, in different real water samples, in scaled-up reactor under natural sunlight irradiation, and in continuous-flow reactor for consecutively producing H2 O2 solution for water decontamination.

Ultra-fast supercritically solvothermal polymerization for large single-crystalline covalent organic frameworks

Crystalline polymer materials, e.g., hyper-crosslinked polystyrene, conjugate microporous polymers and covalent organic frameworks, are used as catalyst carriers, organic electronic devices and molecular sieves. Their properties and applications are highly dependent on their crystallinity. An efficient polymerization strategy for the rapid preparation of highly or single-crystalline materials is beneficial not only to structure-property studies but also to practical applications. However, polymerization usually leads to the formation of amorphous or poorly crystalline products with small grain sizes. It has been a challenging task to efficiently and precisely assemble organic molecules into a single crystal through polymerization. To address this issue, we developed a supercritically solvothermal method that uses supercritical carbon dioxide (sc-CO2) as the reaction medium for polymerization. Sc-CO2 accelerates crystal growth due to its high diffusivity and low viscosity compared with traditional organic solvents. Six covalent organic frameworks with different topologies, linkages and crystal structures are synthesized by this method. The as-synthesized products feature polarized photoluminescence and second-harmonic generation, indicating their high-quality single-crystal nature. This method holds advantages such as rapid growth rate, high productivity, easy accessibility, industrial compatibility and environmental friendliness. In this protocol, we provide a step-by-step procedure including preparation of monomer dispersion, polymerization in sc-CO2, purification and characterization of the single crystals. By following this protocol, it takes 1-5 min to grow sub-mm-sized single crystals by polymerization. The procedure takes ~4 h from preparation of monomer dispersion and polymerization in sc-CO2 to purification and drying of the product.

Light-Induced Variation of Lithium Coordination Environment in g-C3N4 Nanosheet for Highly Efficient Oxygen Reduction Reactions

The structure and electronic state of the active center in a single-atom catalyst undergo noticeable changes during a dynamic catalytic process. The metal atom active center is not well demonstrated in a dynamic manner. This study demonstrated that Li metal atoms, serving as active centers, can migrate on a C3N4 monolayer or between C3N4 monolayers when exposed to light irradiation. This migration alters the local coordination environment of Li in the C3N4 nanosheets, leading to a significant enhancement in photocatalytic activity. The photocatalytic H2O2 process could be maintained for 35 h with a 920 mmol/g record-high yield, corresponding to a 0.4% H2O2 concentration, which is far greater than the value (0.1%) of practical application for wastewater treatment. Density functional theory calculations indicated that dynamic Li-coordinated structures contributed to the superhigh photocatalytic activity.

Photocatalytic degradation of chlorinated organic pollutants by ZnS@ZIF-8 composite through hydrogen peroxide generation by activating dioxygen under simulated sunlight irradiation

Photocatalytic hydrogen peroxide (H2O2) production and its application in advanced oxidation processes (AOPs) are regarded as low-cost and environmentally friendly wastewater treatment processes. Herein, by modifying a small amount of sulphide on the zeolitic imidazolate framework-8 (ZIF-8), a ZnS@ZIF-8 composite and used for photocatalytic H2O2 production to degrade chlorinated organic pollutants under simulated sunlight (SSL). ZnS@ZIF-8 composite could enhance the separation of photo-induced charge carriers, promote electron transfer from zinc sulphide (ZnS) to ZIF-8, which exhibited good selectivity for the two-electron oxygen reduction reaction (2e--ORR) and two-electron water oxidation (2e--WOR) pathways. Based on oxygen (O2) activation, the developed ZnS@ZIF-8/O2/SSL system could achieve 6.43 mmol/L H2O2 production within 150 min, which was approximately 8.66 and 10.36 times higher than that of the ZnS/O2/SSL and ZIF-8/O2/SSL systems, respectively. In the ZnS@ZIF-8/O2/SSL system, the ORR, WOR and H2O2 photolysis led to the generation of hydroxyl radical (•OH), while the photochemical behavior of ZnS in ZnS@ZIF-8 composite resulted in the generation of active hydrogen (*H). Benefitting from the high concentration of H2O2 and the coexistence of redox species in the ZnS@ZIF-8/O2/SSL system, various chlorinated organic pollutants could be dechlorinated and mineralized. In addition, a possible mechanism for photocatalytic H2O2 production was also proposed. Importantly, the proposed process did not involve an additional sacrificial agent or Fenton-like catalysts. This work provides insights into the potential application of ZnS@ZIF-8 composite for H2O2 production and wastewater treatment.

Halogen-Modulated 2D Coordination Polymers for Efficient Hydrogen Peroxide Photosynthesis under Air and Pure Water Conditions

H2 O2 is a widely used eco-friendly oxidant and a potential energy carrier. Photocatalytic H2 O2 production from water and O2 is an ideal approach with the potential to address the current energy crisis and environmental issues. Three zig-zag two-dimensional coordination polymers (2D CPs), named CuX-dptz, were synthesized by a rapid and facile method at room temperature, showing preeminent H2 O2 photoproduction performance under pure water and open air without any additives. CuBr-dptz exhibits a H2 O2 production rate high up to 1874 μmol g-1  h-1 , exceeding most reported photocatalysts under this condition, even comparable to those supported by sacrificial agents and O2 . The coordination environment of Cu can be modulated by halogen atoms (X=Cl, Br, I), which in turn affects the electron transfer process and finally determines the reaction activity. This is the first time that 2D CPs have been used for photocatalytic H2 O2 production in such challenging conditions, which provides a new pathway for the development of portable in situ H2 O2 photosynthesis devices.

Structural Regulation of Photocatalyst to Optimize Hydroxyl Radical Production Pathways for Highly Efficient Photocatalytic Oxidation

Ring-opening of phenol in wastewater is the pivotal step in photocatalytic degradation. The highly selective generation of catalytical active species (•OH) to facilitate this process presents a significant scientific challenge. Therefore, a novel approach for designing photocatalysts with single-atom containment in metal-covalent organic frameworks (M-COFs) is proposed. The selection of imine-linked COFs containing abundant N and O-chelate sites provides a solid foundation for anchoring metal atom. These dispersed metal atom possess rapid accumulation and transfer capabilities for photogenerated electrons, while the periodic π-conjugated structure in 2D-COFs establishes an effective platform. Additionally, the Lewis acid properties of imine bonds in COFs can enhance the adsorption capacity toward gases with Lewis base properties, such as O2 and N2 . It is demonstrated that the Pd2+ @Tp-TAPT, designed based on this concept, exhibits efficient oxygen adsorption and follows the reaction pathway of O2 →•O2 - →H2 O2 →•OH with high selectivity, thereby achieving completely degradation of refractory phenol through photocatalysis within 10 min. It is anticipated that the selective generation of catalytic active species via advanced material design concepts will serve as a significant reference for achieving precise material catalysis in the future.

Solar-to-H2 O2 Catalyzed by Covalent Organic Frameworks

Benefiting from the excellent structural tunability, robust framework, ultrahigh porosity, and rich active sites, covalent organic frameworks (COFs) are widely recognized as promising photocatalysts in chemical conversions, and emerged in the hydrogen peroxide (H2 O2 ) photosynthesis in 2020. H2 O2 , serving as an environmental-friendly oxidant and a promising liquid fuel, has attracted increasing researchers to explore its potential. Over the past few years, numerous COFs-based photocatalysts are developed with encouraging achievements in H2 O2 production, whereas no comprehensive review articles exist to summarize this specific and significant area. Herein we provide a systematic overview of the advances and challenges of COFs in photocatalytic H2 O2 production. We first introduce the priorities of COFs in H2 O2 photosynthesis. Then, various strategies to improve COFs photocatalytic efficiency are discussed. The perspective and outlook for future advances of COFs in this emerging field are finally offered. This timely review will pave the way for the development of highly efficient COFs photocatalysts for practical production of value-added chemicals not limited to H2 O2 .

Multicomponent Synthesis of Imidazole-Linked Fully Conjugated 3D Covalent Organic Framework for Efficient Electrochemical Hydrogen Peroxide Production

The semiconducting properties and applications of three dimensional (3D) covalent organic frameworks (COFs) are greatly hampered because of their long-ranged non-conjugated skeletons and relatively unstable linkages. Here, a robust imidazole-linked fully conjugated 3D covalent organic framework (BUCT-COF-7) is synthesized through the one-pot multicomponent Debus-Radziszewski reaction of the saddle-shaped aldehyde-substituted cyclooctatetrathiophene, pyrene-4,5,9,10-tetraone, and ammonium acetate. The semiconducting BUCT-COF-7, as a metal-free catalyst, shows excellent two electron oxygen reduction reaction (ORR) activity in alkaline medium with high hydrogen peroxide (H2 O2 ) selectivity of 83.4 %. When the BUCT-COF-7 as cathode catalyst is assembled into the electrolyzer, the devices showed high electrochemical production rate of H2 O2 up to 326.9 mmol g-1 h-1 . The accumulative amount of H2 O2 could totally degrade the dye methylene blue via Fenton reaction for wastewater treatment. This is the first report about intrinsic 3D COFs for efficient electrochemical synthesis of H2 O2 , revealing the promising applications of fully conjugated 3D COFs in the environment-related field.

Calix[4]arene-Derived 2D Covalent Organic Framework with an Electron Donor-Acceptor Structure: A Visible-Light-Driven Photocatalyst

The calixarenes are ideal building blocks for constructing photocatalytic covalent organic frameworks (COFs), owing to their electron-rich and bowl-shaped π cavities that endow them with electron-donating and adsorption properties. However, the synthesis and structural confirmation of COFs based on calixarenes are still challenging due to their structural flexibility and conformational diversity. In this study, a calix[4]arene-derived 2D COF is synthesized using 5,11,17,23-tetrakis(p-formyl)-25,26,27,28-tetrahydroxycalix[4]arene (CHO-C4A) as the electron donor and 4,7-bis(4-aminophenyl)-2,1,3-benzothiadiazole (BTD) as the acceptor. The powder X-ray diffraction data and theoretical simulation of crystal structure indicate that COF-C4A-BTD exhibits high crystallinity and features a non-interpenetrating undulating 2D layered structure with AA-stacking. The density functional theory theoretical calculation, transient-state photocurrent tests, and electrochemical impedance spectroscopy confirm the intramolecular charge transfer behavior of COF-C4A-BTD with a donor-acceptor structure, leading to its superior visible-light-driven photocatalytic activity. COF-C4A-BTD exhibits a narrow band gap of 1.99 eV and a conduction band energy of -0.37 V versus normal hydrogen electrode. The appropriate energy band structure can facilitate the participation of ·O2- and h+ . COF-C4A-BTD demonstrates high efficacy in removing organic pollutants, such as bisphenol A, rhodamine B, and methylene blue, with removal rates of 66%, 85%, and 99% respectively.

Exploring the Roles of Single Atom in Hydrogen Peroxide Photosynthesis

This comprehensive review provides a deep exploration of the unique roles of single atom catalysts (SACs) in photocatalytic hydrogen peroxide (H2O2) production. SACs offer multiple benefits over traditional catalysts such as improved efficiency, selectivity, and flexibility due to their distinct electronic structure and unique properties. The review discusses the critical elements in the design of SACs, including the choice of metal atom, host material, and coordination environment, and how these elements impact the catalytic activity. The role of single atoms in photocatalytic H2O2 production is also analysed, focusing on enhancing light absorption and charge generation, improving the migration and separation of charge carriers, and lowering the energy barrier of adsorption and activation of reactants. Despite these advantages, several challenges, including H2O2 decomposition, stability of SACs, unclear mechanism, and low selectivity, need to be overcome. Looking towards the future, the review suggests promising research directions such as direct utilization of H2O2, high-throughput synthesis and screening, the creation of dual active sites, and employing density functional theory for investigating the mechanisms of SACs in H2O2 photosynthesis. This review provides valuable insights into the potential of single atom catalysts for advancing the field of photocatalytic H2O2 production.

Molecular Heptazine-Triazine Junction over Carbon Nitride Frameworks for Artificial Photosynthesis of Hydrogen Peroxide

Revealing the photocatalytic mechanism between various junctions and catalytic activities has become a hotspot in photocatalytic systems. Herein, an internal molecular heptazine/triazine (H/T) junction in crystalline carbon nitride (HTCN) is constructed and devoted to selective two-electron oxygen reduction reaction (2e- ORR) for efficient hydrogen peroxide (H2 O2 ) production. In-situ X-ray diffraction spectra under various temperatures authenticate the successful formation of molecular H/T junction in HTCN during the calcining process rather than physically mixing. The increased surface photovoltage and transient photovoltage signals, and the decreased exciton binding energy undoubtably elucidate that an obvious increasement of carrier density and diffusion capability of photogenerated electrons are realized over HTCN. Additionally, the analyses of in situ photoirradiated Kelvin probe force microscopy and femto-second transient absorption spectra reveal the successful construction of the strong internal built-in-electric field and the existence of the majority of long-lived shallow trapped electrons associated with molecular H/T junction over HTCN, respectively. Benefiting from these, the photocatalytic results exhibit an incredible improvement (96.5-fold) for H2 O2 production. This novel work provides a comprehensive understanding of the long-lived reactive charges in molecular H/T junctions for strengthening the driving-force for photocatalytic H2 O2 production, which opens potential applications for enhancing PCN-based photocatalytic redox reactions.

Modulated Connection Modes of Redox Units in Molecular Junction Covalent Organic Frameworks for Artificial Photosynthetic Overall Reaction

The precise tuning of components, spatial orientations, or connection modes for redox units is vital for gaining deep insight into efficient artificial photosynthetic overall reaction, yet it is still hard achieve for heterojunction photocatalysts. Here, we have developed a series of redox molecular junction covalent organic frameworks (COFs) (M-TTCOF-Zn, M = Bi, Tri, and Tetra) for artificial photosynthetic overall reaction. The covalent connection between TAPP-Zn and multidentate TTF endows various connection modes between water photo-oxidation (multidentate TTF) and CO2 photoreduction (TAPP-Zn) centers that can serve as desired platforms to study the possible interactions between redox centers. Notably, Bi-TTCOF-Zn exhibits a high CO production rate of 11.56 μmol g-1 h-1 (selectivity, ∼100%), which is more than 2 and 6 times higher than those of Tri-TTCOF-Zn and Tetra-TTCOF-Zn, respectively. As revealed by theoretical calculations, Bi-TTCOF-Zn facilitates a more uniform distribution of energy-level orbitals, faster charge transfer, and stronger *OH adsorption/stabilization ability than those of Tri-TTCOF-Zn and Tetra-TTCOF-Zn.

Twistedly hydrophobic basis with suitable aromatic metrics in covalent organic networks govern micropollutant decontamination

The pre-designable structure and unique architectures of covalent organic frameworks (COFs) render them attractive as active and porous medium for water crisis. However, the effect of functional basis with different metrics on the regulation of interfacial behavior in advanced oxidation decontamination remains a significant challenge. In this study, we pre-design and fabricate different molecular interfaces by creating ordered π skeletons, incorporating different pore sizes, and engineering hydrophilic or hydrophobic channels. These synergically break through the adsorption energy barrier and promote inner-surface renewal, achieving a high removal rate for typical antibiotic contaminants (like levofloxacin) by BTT-DATP-COF, compared with BTT-DADP-COF and BTT-DAB-COF. The experimental and theoretical calculations reveal that such functional basis engineering enable the hole-driven levofloxacin oxidation at the interface of BTT fragments to occur, accompanying with electron-mediated oxygen reduction on terphenyl motif to active radicals, endowing it facilitate the balanced extraction of holes and electrons.

Polarity Conversion of the Ag2S/AgInS2 Heterojunction by Radical-Induced Positive Feedback Polydopamine Adhesion for Signal-Switchable Photoelectrochemical Biosensing

Efficient tuning of the polarity of photoactive nanomaterials is of great importance in improving the performance of photoelectrochemical (PEC) sensing platforms. Herein, polarity of the Ag2S/AgInS2 heterojunction is converted by radical-induced positive feedback polydopamine (PDA) adhesion, which is further employed to develop a signal-switchable PEC biosensor. In the nanocomposites, Ag2S and AgInS2 achieve electron-hole separation, exhibiting a strong anodic PEC response. Under the irradiation of light, the Ag2S/AgInS2 heterojunction is able to produce superoxide radical and hydroxyl radical intermediate species, leading to the polymerization of dopamine (DA) and the subsequent adhesion of PDA onto the Ag2S/AgInS2 heterojunction (Ag2S/AgInS2@PDA). By constructing a new electron-transfer pathway with PDA, the polarity of the Ag2S/AgInS2 heterojunction is converted, and the PEC response changes from anodic to cathodic photocurrents. In addition, since the photoreduction activity of PDA is stronger than that of the Ag2S/AgInS2 heterojunction, more superoxide radical can be produced by Ag2S/AgInS2@PDA once PDA is generated, thereby promoting the generation of PDA. Consequently, a positive feedback mechanism is established to enhance the polarity conversion of the Ag2S/AgInS2 heterojunction and amplify the responding to DA. As a result, the bioanalytical method is capable of sensitively quantifying DA in 10 orders of magnitude with an ultralow limit of detection. Moreover, the applicability of this biosensor in real samples is identified by measuring DA in fetal bovine serum and compared with a commercial ELISA method. Overall, this work offers an alternative perspective for adjusting photogenerated carriers of nanomaterials and designing high-performance PEC biosensors.

Thiophene-Containing Covalent Organic Frameworks for Overall Photocatalytic H2 O2 Synthesis in Water and Seawater

H2 O2 is a significant chemical widely utilized in the environmental and industrial fields, with growing global demand. Without sacrificial agents, simultaneous photocatalyzed H2 O2 synthesis through the oxygen reduction reaction (ORR) and water oxidation reaction (WOR) dual channels from seawater is green and sustainable but still challenging. Herein, two novel thiophene-containing covalent organic frameworks (TD-COF and TT-COF) were first constructed and served as catalysts for H2 O2 synthesis via indirect 2e- ORR and direct 2e- WOR channels. The photocatalytic H2 O2 production performance can be regulated by adjusting the N-heterocycle modules (pyridine and triazine) in COFs. Notably, with no sacrificial agents, just using air and water as raw materials, TD-COF exhibited high H2 O2 production yields of 4060 μmol h-1  g-1 and 3364 μmol h-1  g-1 in deionized water and natural seawater, respectively. Further computational mechanism studies revealed that the thiophene was the primary photoreduction unit for ORR, while the benzene ring (linked to the thiophene by the imine bond) was the central photooxidation unit for WOR. The current work exploits thiophene-containing COFs for overall photocatalytic H2 O2 synthesis via ORR and WOR dual channels and provides fresh insight into creating innovative catalysts for photocatalyzing H2 O2 synthesis.