Modulating Electronic Metal-Support Interactions to Boost Visible-Light-Driven Hydrolysis of Ammonia Borane: Nickel-Platinum Nanoparticles Supported on Phosphorus-Doped Titania

Silica Confinement for Stable and Magnetic Co-Cu Alloy Nanoparticles in Nitrogen-Doped Carbon for Enhanced Hydrogen Evolution

Ammonia borane (AB) with 19.6 wt % H2 content is widely considered a safe and efficient medium for H2 storage and release. Co-based nanocatalysts present strong contenders for replacing precious metal-based catalysts in AB hydrolysis due to their high activity and cost-effectiveness. However, precisely adjusting the active centers and surface properties of Co-based nanomaterials to enhance their activity, as well as suppressing the migration and loss of metal atoms to improve their stability, presents many challenges. In this study, mesoporous-silica-confined bimetallic Co-Cu nanoparticles embedded in nitrogen-doped carbon (CoxCu1-x@NC@mSiO2) were synthesized using a facile mSiO2-confined thermal pyrolysis strategy. The obtained product, an optimized Co0.8Cu0.2@NC@mSiO2 catalyst, exhibits enhanced performance with a turnover frequency of 240.9 molH2 ⋅ molmetal ⋅ min-1 for AB hydrolysis at 298 K, surpassing most noble-metal-free catalysts. Moreover, Co0.8Cu0.2@NC@mSiO2 demonstrates magnetic recyclability and extraordinary stability, with a negligible decline of only 0.8 % over 30 cycles of use. This enhanced performance was attributed to the synergistic effect between Co and Cu, as well as silica confinement. This work proposes a promising method for constructing noble-metal-free catalysts for AB hydrolysis.

Directed Dual Charge Pumping Tunes the d-Orbital Configuration of Pt Cluster Boosting Hydrogen Evolution Kinetic

Achieving high catalytic activity with a minimum amount of platinum (Pt) is crucial for accelerating the cathodic hydrogen evolution reaction (HER) in proton exchange membrane (PEM) water electrolysis, yet it remains a significant challenge. Herein, a directed dual-charge pumping strategy to tune the d-orbital electronic distribution of Pt nanoclusters for efficient HER catalysis is proposed. Theoretical analysis reveals that the ligand effect and electronic metal-support interactions (EMSI) create an effective directional electron transfer channel for the d-orbital electrons of Pt, which in turn optimizes the binding strength to H*, thereby significantly enhancing HER efficiency of the Pt site. Experimentally, this directed dual-charge pumping strategy is validated by elaborating Sb-doped SnO2 (ATO) supported Fe-doped PtSn heterostructure catalysts (Fe-PtSn/ATO). The synthesized 3%Fe-PtSn/ATO catalysts exhibit lower overpotential (requiring only 10.5 mV to reach a current density of 10 mA cm- 2), higher mass activity (28.6 times higher than commercial 20 wt.% Pt/C), and stability in the HER process in acidic media. This innovative strategy presents a promising pathway for the development of highly efficient HER catalysts with low Pt loading.

Identification of Intersite Distance Effects in Au-Ag Single-Atom Alloy Catalysts Using Single Nanoparticle Collision Electrochemistry

Regulating the atomic density of single-atom alloys (SAAs) promotes the potential to significantly enhance the electrocatalytic activity. However, conventional methods for study on the electrocatalytic performance of SAAs versus the intersite distance demand exhaustive experiments and characterization. Herein, we present a combinatorial synthesis and analysis method to investigate the intersite distance effect of SAA electrocatalysts. We employ single-nanoparticle collision electrochemistry to realize in situ electrodeposition of a precisely tunable Au atomic density onto individual parent Ag nanoparticles, followed by instantaneous electrocatalytic measurement of the newborn Au-Ag SAAs. In this work, the utility of our method is confirmed by the identification of intersite distance effects of Au-Ag SAAs toward the oxygen reduction reaction. When the site distance between two neighboring Au atoms is 1.9 nm, Au-Ag SAAs exhibit optimal activity. This work provides a simple and efficient method for screening other SAA electrocatalysts with ideal intersite distance at the single-nanoparticle level.

Ultrahigh Bifunctional Photocatalytic CO2 Reduction and H2 Evolution by Synergistic Interaction of Heteroatomic Pt-Ru Dimerization Sites

Diatomic-site catalysts (DASCs) inherit the excellent performance of single-atom catalysts (SACs) by utilizing two adjacent atomic metal species to achieve functional complementarity and synergistic effects that improve the carbon dioxide reduction reaction (CO2RR) and H2 evolution reaction (HER) kinetics. Herein, we report a method to further improve the catalytic efficiency of Pt by using Pt and Ru single atoms randomly anchored on a g-C3N4 surface, yielding partial Pt-Ru dimers. The synthesized catalyst exhibits extraordinary photocatalytic activity and stability in both the CO2RR and HER processes. In-depth experimentation, the pH-dependent chemical exchange saturation transfer (CEST) imaging nuclear magnetic resonance (NMR) method, and theoretical analyses reveal that the excellent performance is attributed to orbital coupling between the Pt atoms and the neighboring Ru atoms (mainly dxy and dxz), which decreases the orbital energy levels and weakens the bond strength with intermediates, resulting in improved CO2RR and HER performance. This study successfully applies the pH-dependent CEST imaging NMR method to catalytic reactions, and CO2 adsorption is directly observed using CEST 2D imaging maps. This work presents significant potential for a variety of catalytic reaction applications by systematically designing bimetallic dimers with higher activity and stability.

Highly Efficient Transformation of Tar Model Compounds into Hydrogen by a Ni-Co Alloy Nanocatalyst During Tar Steam Reforming

Hydrogen (H2) production from coal and biomass gasification was considered a long-term and viable way to solve energy crises and global warming. Tar, generated as a hazardous byproduct, limited its large-scale applications by clogging and corroding gasification equipment. Although catalytic steam reforming technology was used to convert tar into H2, catalyst deactivation restricted its applicability. A novel nanocatalyst was first synthesized by the modified sol-gel method using activated biochar as the support, nickel (Ni) as the active component, and cobalt (Co) as the promoter for converting tar into H2. The results indicated that a high H2 yield of 263.84 g H2/kg TMCs (Tar Model Compounds) and TMC conversion of almost 100% were obtained over 6% Ni-4% Co/char, with more than 30% increase in hydrogen yield compared to traditional catalysts. Moreover, 6% Ni-4% Co/char exhibited excellent resistance to carbon deposition by removing the nucleation sites for graphite formation, forming stable Ni-Co alloy, and promoting the char gasification reaction; resistance to oxidation deactivation due to the high oxygen affinity of Co and reduction of the oxidized nickel by H2 and CO; resistance to sintering deactivation by strengthened interaction between Ni and Co, high specific surface area (920.61 m2/g), and high dispersion (7.3%) of Ni nanoparticles. This work provided a novel nanocatalyst with significant potential for long-term practical applications in the in situ conversion of tar into H2 during steam reforming.

Unconventional Synthesis of Metal (Ni, Co, Ag) Antimony Alloy Particles

Bimetallic alloy materials attract interest owing to their properties and stability compared to pure metals, especially alloys with nanoscale dimensions. Metal antimony (MSb) alloys, specifically NiSb, are widely used for charge storage applications due to their high stability. Most synthetic approaches to form these materials require drastic conditions (e.g., high temperatures, potent reducing agents, and extended reaction times), limiting control over the final morphology. The other viable approach is a galvanic replacement that uses unstable materials as precursors. In this work, we present a new and facile method to prepare several MSb (M = Ni, Co, Ag) alloys with shape control by reacting Sb2S3 particles with a metal(M)-sulfide single source precursor in trioctylphosphine (TOP) under mild conditions. Furthermore, we explore the role of TOP as a reducing agent and demonstrate how both alloy constituents are crucial for mutual stabilization. Electrochemical studies are also performed on these NiSb particles, showing their ambipolar nature and allowing their utilization as the active ingredient in the demonstrated high-energy-density symmetric supercapacitor.

Enhanced Hot Electron Flow and Catalytic Synergy by Engineering Core-Shell Structures on Au-Pd Nanocatalysts

The synergistic catalytic performances of bimetallic catalysts are often attributed to the reaction mechanism associated with the alloying process of the catalytic metals. Chemically induced hot electron flux is strongly correlated with catalytic activity, and the interference between two metals at the atomic level can have a huge impact on the hot electron generation on the bimetallic catalysts. In this study, we investigate the correlation between catalytic synergy and hot electron chemistry driven by the electron coupling effect using a model system of Au-Pd bimetallic nanoparticles. We show that the bimetallic nanocatalysts exhibit enhanced catalytic activity under the hydrogen oxidation reaction compared with that of monometallic Pd nanocatalysts. Analysis of the hot electron flux generated in each system revealed the formation of Au/PdOx interfaces, resulting in high reactivity on the bimetallic catalyst. In further experiments with engineering the Au@Pd core-shell structures, we reveal that the hot electron flux, when the topmost surface Pd atoms were less affected by inner Au, due to the concrete shell, was smaller than the alloyed one. The alloyed bimetallic catalyst forming the metal-oxide interfaces has a more direct effect on the hot electron chemistry, as well as on the catalytic reactivity. The great significance of this study is in the confirmation that the change in the hot electron formation rate with the metal-oxide interfaces can be observed by shell engineering of nanocatalysts.

Boosting the Catalytic Performance of NiMoO4 Nanorods in H2 Generation upon NH3BH3 Hydrolysis via a Reduction Process

Although a range of noble metal catalysts, including Ru, Rh, Pd, Pt, and Au, have been developed for efficient H2 generation upon NH3BH3 hydrolysis at room temperature, this is a highly urgent need for exploring earth-abundant metal nanocatalysts for H2 generation upon NH3BH3 hydrolysis. Herein, a NaBH4 reduction strategy was developed to boost the catalytic performance of NiMoO4 nanorods in H2 generation upon NH3BH3 hydrolysis. Indeed, the pristine NiMoO4 nanorods were catalytically inert in NH3BH3 hydrolysis. Significantly, the reduced NiMoO4 nanorods presented excellent catalytic activity in H2 generation upon NH3BH3 hydrolysis, with a turnover frequency (TOF) of 31.2 L(H2)·gcat-1·h-1. Interestingly, the TOF of NH3BH3 hydrolysis over reduced NiMoO4 nanorods significantly increased from 31.2 to 53.6 L(H2)·gcat-1·h-1 under 0.3 M NaOH. The boosting catalytic performance of NiMoO4 nanorods via NaBH4 reduction in H2 generation might be attributed to the higher content of Oads and the formation of nickel boride in the reduced NiMoO4 nanorods. In this work, NH3BH3 hydrolysis over reduced NiMoO4 nanorods was not only used for safe H2 generation but also for its in situ tandem hydrogenation in organic chemistry.