Stabilizing Pt Single Atoms through Pt-Se Electron Bridges on Vacancy-enriched Nickel Selenide for Efficient Electrocatalytic Hydrogen Evolution

Independent Control Over the H/OH Adsorption: Breaking the Trade-Off Between H/OH-Adsorption and H2O-Dissociation of Platinum-Group Metal Electrocatalyst for Hydrogen Evolution Reaction

Platinum-group metals catalysts (such as Rh, Pd, Ir, Pt) have been the most efficient hydrogen evolution reaction (HER) electrocatalysts due to their moderate H adsorption strength, while the high H2O-dissociation barrier in alkaline media restrains the catalytic performance of PGM catalysts. However, the optimization of the H2O-dissociation barrier and *H/*OH binding energy toward their individual optima is limited due to the constraints of their scaling relationship on a single active site. Here, a coordinatively unsaturated "M─Ox─W" (M = Rh, Pd, Ir, Pt) active area is constructed, where H and OH species are anchored on Pt-group metal sites and inactive W sites for individual regulation. By combining experiments and density functional theory calculations, the introduction of extra OH-adsorption sites (coordinatively unsaturated WO3-x) avoids the competitive adsorption of H and OH on the single site, while the enhanced OH-adsorption capacity on the coordinatively unsaturated WO3-x effectively facilitates the adsorption/dissociation of interfacial H2O. As a result, the representative Rh-WO3-x catalyst exhibits outstanding catalytic activity and durability for HER. The findings of this work not only provide valuable insights for the design of efficient PGM catalysts for HER but also shed light on the development of electrocatalysts for other catalytic reactions.

Recent Advances on Two-Dimensional Nanomaterials Supported Single-Atom for Hydrogen Evolution Electrocatalysts

Water electrolysis has been recognized as a promising technology that can convert renewable energy into hydrogen for storage and utilization. The superior activity and low cost of catalysis are key factors in promoting the industrialization of water electrolysis. Single-atom catalysts (SACs) have attracted attention due to their ultra-high atomic utilization, clear structure, and highest hydrogen evolution reaction (HER) performance. In addition, the performance and stability of single-atom (SA) substrates are crucial, and various two-dimensional (2D) nanomaterial supports have become promising foundations for SA due to their unique exposed surfaces, diverse elemental compositions, and flexible electronic structures, to drive single atoms to reach performance limits. The SA supported by 2D nanomaterials exhibits various electronic interactions and synergistic effects, all of which need to be comprehensively summarized. This article aims to organize and discuss the progress of 2D nanomaterial single-atom supports in enhancing HER, including common and widely used synthesis methods, advanced characterization techniques, different types of 2D supports, and the correlation between structural hydrogen evolution performance. Finally, the latest understanding of 2D nanomaterial supports was proposed.

Pinpointing the Cl Coordination Effect on Mn-N3-Cl Moiety Toward Boosting Reaction Kinetics and Suppressing Shuttle Effect in Li-S Batteries

Single atom catalysts (SACs) are highly favored in Li-S batteries due to their excellent performance in promoting the conversion of lithium polysulfides (LiPSs) and inhibiting their shuttling. However, the intricate and interrelated microstructures pose a challenge in deciphering the correlation between the chemical environment surrounding the active site and its catalytic activity. Here, a novel SAC featuring a distinctive Mn-N3-Cl moiety anchored on B, N co-doped carbon nanotubes (MnN3Cl@BNC) is synthesized. Subsequently, the selective removal of the Cl ligands while inheriting other microstructures is performed to elucidate the effect of Cl coordination on catalytic activity. The Cl coordination effectively enhances the electron cloud density of the Mn-N3-Cl moiety, reducing the band gap and increasing the adsorption capacity and redox kinetics of LiPSs. As a modified separator for Li-S batteries, MnN3Cl@BNC exhibits high capacities of 1384.1 and 743 mAh g-1 at 0.1 and 3C, with a decay rate of only 0.06% per cycle over 700 cycles at 1 C, which is much better than that of MnN3OH@BNC. This study reveals that Cl coordination positively contributes to improving the catalytic activity of the Mn-N3-Cl moiety, providing a fresh perspective for the design of high-performance SACs.

Single-atom catalysts activate persulfate to degrade emerging organic contaminants in aqueous environments

Single-atom catalysts (SACs) exhibit outstanding catalytic activity due to their highly dispersed metal centers. Activating persulfates (PS) with SACs can generate various reactive oxygen species (ROS) to efficiently degrade emerging organic contaminants (EOCs) in aqueous environments, offering unique advantages such as high reaction rates and excellent stability. This technique has been extensively researched and holds enormous potential applications. In this paper, we comprehensively elaborated on the synthesis methods of SACs and their limitations, and factors influencing the catalytic performance of SACs, including metal center characteristics, coordination environment, and types of substrates. We also analyzed practical considerations for application. Subsequently, we discussed the mechanism of SACs activating PS for EOCs degradation, encompassing adsorption processes, radical pathways, and non-radical pathways. Finally, we provide prospects and outline our vision for future research, aiming to guide advancements in applying this technique.

Boosting the Electrical Transfer by Molybdenum Doping for Robust and Flexible NiSe-Based Supercapacitor

NiSe is a promising electrode material for enhancing the energy density of supercapacitors, but it faces challenges such as sensitivity to electrolyte anions, limited specific capacity, and unstable cycling. This study employs a strategy of metal atom doping to address these issues. Through a hydrothermal reaction, Mo-doped NiSe demonstrates significant improvement in electrochemical performance, exhibiting high capacity (799.90 C g-1), splendid rate performance, and excellent cyclic stability (90% capacity retention). The introduction of Mo induces charge redistribution in NiSe, leading to a reduction in the band gap. Theoretical calculation reveals that Mo doping can effectively enhance the electrical conductivity and the adsorption energy of NiSe. A flexible printed hybrid Mo-doped NiSe-based supercapacitor is fabricated, demonstrating superior electrochemical performance (367.04 mF cm-2) and the ability to power timers, LEDs, and toy fans. This research not only deepens the understanding of the electrochemical properties of metal-doped NiSe but also highlights its application potential in high-performance supercapacitors.

Achieving Negatively Charged Pt Single Atoms on Amorphous Ni(OH)2 Nanosheets with Promoted Hydrogen Absorption in Hydrogen Evolution

Single-atom (SA) catalysts with nearly 100% atom utilization have been widely employed in electrolysis for decades, due to the outperforming catalytic activity and selectivity. However, most of the reported SA catalysts are fixed through the strong bonding between the dispersed single metallic atoms with nonmetallic atoms of the substrates, which greatly limits the controllable regulation of electrocatalytic activity of SA catalysts. In this work, Pt-Ni bonded Pt SA catalyst with adjustable electronic states was successfully constructed through a controllable electrochemical reduction on the coordination unsaturated amorphous Ni(OH)2 nanosheet arrays. Based on the X-ray absorption fine structure analysis and first-principles calculations, Pt SA was bonded with Ni sites of amorphous Ni(OH)2, rather than conventional O sites, resulting in negatively charged Ptδ-. In situ Raman spectroscopy revealed that the changed configuration and electronic states greatly enhanced absorbability for activated hydrogen atoms, which were the essential intermediate for alkaline hydrogen evolution reaction. The hydrogen spillover process was revealed from amorphous Ni(OH)2 that effectively cleave the H-O-H bond of H2O and produce H atom to the Pt SA sites, leading to a low overpotential of 48 mV in alkaline electrolyte at -1000 mA cm-2 mg-1Pt, evidently better than commercial Pt/C catalysts. This work provided new strategy for the controllable modulation of the local structure of SA catalysts and the systematic regulation of the electronic states.

Enhancing Ni/Co Activity by Neighboring Pt Atoms in NiCoP/MXene Electrocatalyst for Alkaline Hydrogen Evolution

Density functional theory (DFT) calculations demonstrate neighboring Pt atoms can enhance the metal activity of NiCoP for hydrogen evolution reaction (HER). However, it remains a great challenge to link Pt and NiCoP. Herein, we introduced curvature of bowl-like structure to construct Pt/NiCoP interface by adding a minimal 1 ‰-molar-ratio Pt. The as-prepared sample only requires an overpotential of 26.5 and 181.6 mV to accordingly achieve the current density of 10 and 500 mA cm-2 in 1 M KOH. The water dissociation energy barrier (Ea) has a ~43 % decrease compared with NiCoP counterpart. It also shows an ultrahigh stability with a small degradation rate of 10.6 μV h-1 at harsh conditions (500 mA cm-2 and 50 °C) after 3000 hrs. X-ray photoelectron spectroscopy (XPS), soft X-ray absorption spectroscopy (sXAS), and X-ray absorption fine structure (XAFS) verify the interface electron transfer lowers the valence state of Co/Ni and activates them. DFT calculations also confirm the catalytic transition step of NiCoP can change from Heyrovsky (2.71 eV) to Tafel step (0.51 eV) in the neighborhood of Pt, in accord with the result of the improved Hads at the interface disclosed by in situ electrochemical impedance spectroscopy (EIS) and scanning electrochemical microscopy (SECM) tests.

Sublayer-Sulfur-Vacancy-Induced Charge Redistribution of FeCuS Nanoflower Awakening Alkaline Hydrogen Evolution

Advancing the progress of sustainable and green energy technologies requires the improvement of valid electrocatalysts for the hydrogen evolution reaction (HER). Reconfiguring charge distribution through heteroatom doping-induced vacancy serves as an effective approach to implement high performance for HER catalysts. Here, we successfully fabricated Fe-doped CuS (FeCuS) with the sublayer sulfur vacancy to judge its HER performance and dissect the activity origins. Density functional theory calculation further elucidates that the primary factor contributing to the heightened HER activity is that the sublayer sulfur vacancies awaken the charge redistribution. In addition to effectively decreasing the energy barrier associated with the Volmer step, it modulates the adsorption/desorption capacity of H*. As a result, its intrinsic activity for the HER has significantly increased. Concretely, the obtained FeCuS displays an excellent catalytic performance, whose Tafel slope is only 59 mV dec-1 and the overpotential (at 10 mA cm-2) is as low as 71 mV in an alkaline environment, surpassing the majority of previously documented catalysts in scientific literature. This work shows that the construction of sublayer sulfur vacancies by Fe doping can achieve the charge redistribution and precise tuning of electronic structure; thereby, the inert CuS can be transformed into highly efficient electrocatalysts.

Correlation between Heteroatom Coordination and Hydrogen Evolution for Single-site Pt on Carbon-based Nanocages

The electrocatalytic performance of single-site catalysts (SSCs) is closely correlated with the electronic structure of metal atoms. Herein we construct a series of Pt SSCs on heteroatom-doped hierarchical carbon nanocages, which exhibit increasing hydrogen evolution reaction (HER) activities along S-doped, P-doped, undoped and N-doped supports. Theoretical simulation indicates a multi-H-atom adsorption process on Pt SSCs due to the low coordination, and a reasonable descriptor is figured out to evaluate the HER activities. Relative to C-coordinated Pt, N-coordinated Pt has higher reactivity due to the electron transfer of N-to-Pt, which enriches the density of states of Pt 5d orbital near the Fermi level and facilitates the capturing of protons, just the opposite to the situations for P- and S-coordinated ones. The stable N-coordinated Pt originates from the kinetic stability throughout the multi-H-atom adsorption process. This finding provides a significant guidance for rational design of advanced Pt SSCs on carbon-based supports.

Constructing regulable supports via non-stoichiometric engineering to stabilize ruthenium nanoparticles for enhanced pH-universal water splitting

Establishing appropriate metal-support interactions is imperative for acquiring efficient and corrosion-resistant catalysts for water splitting. Herein, the interaction mechanism between Ru nanoparticles and a series of titanium oxides, including TiO, Ti4O7 and TiO2, designed via facile non-stoichiometric engineering is systematically studied. Ti4O7, with the unique band structure, high conductivity and chemical stability, endows with ingenious metal-support interaction through interfacial Ti-O-Ru units, which stabilizes Ru species during OER and triggers hydrogen spillover to accelerate HER kinetics. As expected, Ru/Ti4O7 displays ultralow overpotentials of 8 mV and 150 mV for HER and OER with a long operation of 500 h at 10 mA cm-2 in acidic media, which is expanded in pH-universal environments. Benefitting from the excellent bifunctional performance, the proton exchange membrane and anion exchange membrane electrolyzer assembled with Ru/Ti4O7 achieves superior performance and robust operation. The work paves the way for efficient energy conversion devices.

Temporally Decoupled Ammonia Splitting by a Zn-NH3 Battery with an Ammonia Oxidation/Hydrogen Evolution Bifunctional Electrocatalyst as a Cathode

Ammonia splitting to hydrogen is a decisive route for hydrogen economy but is seriously limited by the complex device and low efficiency. Here, we design and propose a new rechargeable Zn-NH3 battery based on temporally decoupled ammonia splitting to achieve efficient NH3-to-H2 conversion. In this system, ammonia is oxidized into nitrogen during cathodic charging (2NH3 + 6OH- → N2 + 6H2O + 6e-) with external electrical energy conversion and storage, while during cathodic discharging, water is reduced to hydrogen (2H2O + 2e- → H2 + 2OH-) with electrical energy generation. In this loop, continuous and efficient H2 production without separation and purification is achieved. With the help of the ammonia oxidation reaction (AOR) and hydrogen evolution reaction (HER) bifunctional catalyst of Mo2C/NiCu@C, a rechargeable Zn-NH3 battery is realized that exhibits a high NH3-to-H2 FE of 91.6% with outstanding durability for 900 cycles (300 h) at 20 mA/cm2, enabling efficient and continuous NH3-to-H2 conversion.

Dual-Atom Co/Ni Electrocatalyst Anchored at the Surface-Modified Ti3C2Tx MXene Enables Efficient Hydrogen and Oxygen Evolution Reactions

Dual-atom catalytic sites on conductive substrates offer a promising opportunity for accelerating the kinetics of multistep hydrogen and oxygen evolution reactions (HER and OER, respectively). Using MXenes as substrates is a promising strategy for depositing those dual-atom electrocatalysts, if the efficient surface anchoring strategy ensuring metal-substrate interactions and sufficient mass loading is established. We introduce a surface-modification strategy of MXene substrates by preadsorbing L-tryptophan molecules, which enabled attachment of dual-atom Co/Ni electrocatalyst at the surface of Ti3C2Tx by forming N-Co/Ni-O bonds, with mass loading reaching as high as 5.6 wt %. The electron delocalization resulting from terminated O atoms on MXene substrates, N atoms in L-tryptophan anchoring moieties, and catalytic metal atoms Co and Ni provides an optimal adsorption strength of intermediates and boosts the HER and OER kinetics, thereby notably promoting the intrinsic activity of the electrocatalyst. CoNi-Ti3C2Tx electrocatalyst displayed HER and OER overpotentials of 31 and 241 mV at 10 mA cm-2, respectively. Importantly, the CoNi-Ti3C2Tx electrocatalyst also exhibited high operational stability for both OER and HER over 100 h at an industrially relevant current density of 500 mA cm-2. Our study provided guidance for constructing dual-atom active metal sites on MXene substrates to synergistically enhance the electrochemical efficiency and stability of the energy conversion and storage systems.

Ultra-Efficient and Cost-Effective Platinum Nanomembrane Electrocatalyst for Sustainable Hydrogen Production

Hydrogen production through hydrogen evolution reaction (HER) offers a promising solution to combat climate change by replacing fossil fuels with clean energy sources. However, the widespread adoption of efficient electrocatalysts, such as platinum (Pt), has been hindered by their high cost. In this study, we developed an easy-to-implement method to create ultrathin Pt nanomembranes, which catalyze HER at a cost significantly lower than commercial Pt/C and comparable to non-noble metal electrocatalysts. These Pt nanomembranes consist of highly distorted Pt nanocrystals and exhibit a heterogeneous elastic strain field, a characteristic rarely seen in conventional crystals. This unique feature results in significantly higher electrocatalytic efficiency than various forms of Pt electrocatalysts, including Pt/C, Pt foils, and numerous Pt single-atom or single-cluster catalysts. Our research offers a promising approach to develop highly efficient and cost-effective low-dimensional electrocatalysts for sustainable hydrogen production, potentially addressing the challenges posed by the climate crisis.

N-Coordinated Iridium-Molybdenum Dual-Atom Catalysts Enabling Efficient Bifunctional Hydrogen Electrocatalysis

Achieving effective hydrogen evolution/oxidation reaction (HER/HOR) across a wide pH span is of critical importance in unlocking the full potential of hydrogen energy but remains intrinsically challenging. Here, we engineer the N-coordinated Ir-Mo dual atoms on a carbon matrix by ultrafast high-temperature sintering, creating an efficient bifunctional electrocatalyst for both HER and HOR in both acidic and alkaline electrolytes. The optimized catalyst, Ir-Mo DAC/NC, demonstrates exceptional performance, with a significantly reduced HER overpotential of 11.3 mV at 10 mA/cm2 and a HOR exchange current (i0,m) of 3972 mA/mgIr in acidic conditions, surpassing the performance of Pt/C and Ir/C catalysts. In alkaline conditions, Ir-Mo DAC/NC also outperforms Pt/C, as evidenced by its low HER overpotential of 23 mV at 10 mA/cm2 and a high i0,m of 1308 mA/mgIr. Furthermore, our catalyst exhibits remarkable stability in both acidic and alkaline environments. DFT calculations results reveal that the superior electrochemical performance of Ir-Mo DAC/NC arises from the electronic synergy between Ir and Mo pairs, which regulates the interaction between the intermediates and active sites. These findings present a promising strategy for the development of dual-atom catalysts (DACs), with potential applications in the polymer fuel cells and water electrolyzers.