Silver phosphate supported on metal–organic framework (Ag 3 PO 4 @MOF‐5) as a novel heterogeneous catalyst for green synthesis of indenoquinolinediones

Portable on-off visual-mode detection using intrinsic fluorescent zinc-based metal-organic framework for detection of diclofenac in pharmaceutical tablets

On-site, robust, and quantitative detection of diclofenac (DCF) is highly significant in bioanalysis and quality control. Fluorescence-based metal-organic frameworks (MOFs) play a pivotal role in biochemical sensing, offering a versatile platform for detecting various biomolecules. However, conventional fluorescent MOF sensors often rely on lanthanide metals, which can pose challenges in terms of cost, accessibility, and environmental impact. Herein, an intrinsic blue fluorescent zinc-based metal-organic framework (FMOF-5) was prepared free from lanthanide metals. Coordination-induced emission as an effective strategy was followed wherein a non-fluorescent ligand is converted to a fluorescent one after insertion in a framework. Conventional fluorometry and smartphone-assisted visual methods were employed for the detection of DCF. The fluorescence emission of the FMOF-5 was effectively quenched upon the addition of the DCF, endowing it an "off" condition, which permits the construction of a calibration curve with a wide linear range of 30-670 µM and a detection limit of about 4.1 µM. Other analytical figures of merit, such as linearity, sensitivity, selectivity, accuracy, and precision were studied and calculated. Furthermore, the proposed sensor was successfully applied to quantify DCF in pharmaceutical tablets with reliable recovery and precision. Importantly, the elimination of lanthanide metals from the fluorescence detection system enhances its practicality and sustainability, making it a promising alternative for DCF detection in pharmaceutical analysis applications.

Agar-tragacanth/silk fibroin hydrogel containing Zn-based MOF as a novel nanobiocomposite with biological activity

In this study, a novel nanobiocomposite consisting of agar (Ag), tragacanth gum (TG), silk fibroin (SF), and MOF-5 was synthesized and extensively investigated by various analytical techniques and basic biological assays for potential biomedical applications. The performed Trypan blue dye exclusion assay indicated that the proliferation percentage of HEK293T cells was 71.19%, while the proliferation of cancer cells (K-562 and MCF-7) was significantly lower, at 10.74% and 3.33%. Furthermore, the Ag-TG hydrogel/SF/MOF-5 nanobiocomposite exhibited significant antimicrobial activity against both E. coli and S. aureus strains, with growth inhibition rates of 76.08% and 69.19% respectively. Additionally, the hemolytic index of fabricated nanobiocomposite was found approximately 19%. These findings suggest that the nanobiocomposite exhibits significant potential for application in cancer therapy and wound healing.

A novel ratiometric design of microfluidic paper-based analytical device for the simultaneous detection of Cu2+ and Fe3+ in drinking water using a fluorescent MOF@tetracycline nanocomposite

The regular and on-site monitoring of ions in drinking water is essential for safeguarding public health, ensuring high water quality, and preserving the ecological balance of aquatic ecosystems. Thus, developing a portable analytical device for the rapid, cost-effective, and visual on-site detection of multiple environmental pollutants is notably significant. In the present work, a novel ratiometric microfluidic paper-based analytical device (μPAD) was designed and developed for the simultaneous detection of Fe3+ and Cu2+ ions in water samples taking advantages from built-in masking zone. The μPAD was functionalized with a greenish-yellow fluorescent Zn-based metal-organic framework@tetracycline (FMOF-5@TC) nanocomposite, and the ratiometric design was based on the change in emission color from greenish yellow (FMOF-5@TC) to blue (FMOF-5). The μPAD consisted of one sample zone linked to two detection zones via two channels: the first channel was for the detection of both ions, while the second was intended for detecting only Cu2+ ions and comprised a built-in masking zone to remove Fe3+ ions prior to reaching the detection zone. The corresponding color changes were recorded with the aid of a smartphone and RGB calculations. The linear ranges were 0.1-80 μM for Cu2+ and 0.2-160 μM for Fe3+, with limits of detection of 0.027 and 0.019 μM, respectively. The simple μPAD design enabled the simultaneous detection of Cu2+ and Fe3+ ions in drinking water samples with excellent accuracy and precision, with spike recoveries of 81.28-96.36% and 83.01-102.33% for Cu2+ and Fe3+, respectively.

Strong Host-Guest Dependence on the Emissive Properties of MOF-5 and [Zn2(BTTB)(DMF)2•(H2O)3]n

3D-[Zn4O(1,4-BDC)3•x(solvent)]n (MOF-5; BDC = 1,4-benzodicarboxylate) and 3D-[Zn2(BTTB)(DMF)2•(H2O)3]n (MOF-D; BTTB = 4,4',4″,4‴-benzene-1,2,4,5-tetrayltetrabenzoate) have been investigated by means of steady-state UV-visible and fluorescence and time-resolved emission spectroscopy, as a function of solvent and power of the excitation irradiation. The low-temperature X-ray structures (173 K) were permitted to locate solvent molecules (here H2O) in the lattice. They were found distributed in the middle in the voids with no evidence of specific interactions (H-bond, coulombic, and dipole-dipole) with the framework. The fluorescence decays of the ligands (ππ* excited state), τF, for the host-guest composites MOF-5@solvent and MOF-D@solvent (solvent = air, MeCN, EtCN, MeOH, EtOH, and DMF) were found bi-exponential (short τF1 (ps), and long τF2 (ns)) with one important feature: upon cooling from 298 to 77 K, MOF-5's τF1 decreases and τF2 increases, while the opposite trend is generally observed in MOF-D. The low values for τF1 (ps) in MOF-5 are associated with the augmented probability of solvent-ligand collisions leading to nonradiative deactivation, which upon cooling to 77 K increases further as the scaffolding contracts. The augmentation in τF2 is readily associated with the increased rigidity of the ligands that are not submitted to this effect (at the surface of the MOF and as pendent groups). For the low emitter MOF-D, the reversed situation is noted but not as clearly due to the uncertainties in the data. Upon increasing the excitation flux, the fluorescence intensity increases linearly with the laser power indicating the absence of singlet-singlet annihilation, inferring the absence of efficient exciton migration. This observation is explained by the small absorptivity coefficients, which leads to a small J spectral overlap between absorption and fluorescence according to the Forster and Dexter theories, and consequently, a small rate for energy migration. This conclusion drastically changes the perception of the photocatalytic mechanism of MOF-5 and other MOFs exhibiting similar absorption features (i.e., no antenna effect).

Ultra-small highly fluorescent zinc-based metal organic framework nanodots for ratiometric visual sensing of tetracycline based on aggregation induced emission

Color tonality by intrinsic fluorescent metal-organic frameworks (MOFs) is highly desirable in bioanalytical applications due to its stability, low-cost and robustness with no need for functionalization and/or encapsulation of fluorophores. In the present work, ultra-small and higly fluorescent zinc-based MOFs (FMOF-5) were synthesized. The prepared FMOFs were around 5 nm in size, and gave strong blue emission at 440 nm when excited at 350 nm. Interestingly, tetracycline (TC) selectively tuned the blue emission of FMOF-5 to greenish-yellow emission (520 nm) with dramatic enhancement through aggregation induced emission (AIE). The fluorimetric analysis of TC was carried out through the ratiometric peak intensities of F520/F440, with detection limit (LOD) of 5 nM. To realize quantitative point-of-care based on color tonality, a smartphone integrated with the ratiometric visual platform was thereby design. Hence, TC was visually detected with LOD of 10 nM. The prepared FMOF-5-based probe showed high stability (3 months) and reusability (∼10 times). The developed visual-based platform presents great promise for practical point of care testing due to its low-cost, robustness, ruggedness, simple operation, and excellent selectivity and repeatability.

Ionic Liquid Functionalized Metal-Organic Framework ([DEIm][PF6]@MOF-5): Synthesis, Characterization, and Catalytic Application in the Reduction of 4-Nitrophenol

A novel, unique, highly effective, and recyclable heterogeneous catalyst, diethyl imidazolium hexafluorophosphate ionic liquid supported metal-organic framework ([DEIm][PF6]@MOF-5), has been synthesized using a simple impregnation method at ambient temperature. Characterization of the catalyst was done through various techniques such as Fourier transform infrared (FTIR), energy dispersive X-ray, X-ray diffraction (XRD), transmission electron microscopy, scanning electron microscopy (SEM), elemental mapping, Raman spectroscopy, X-ray photoelectron spectroscopy, and thermogravimetric analysis (TGA) analyses. The kinetic study has shown the high catalytic performance of [DEIm][PF6]@MOF-5 for the reduction of 4-nitrophenol (NP) compared to other catalysts. The catalyst also exhibited efficient electrochemical activity toward 4-NP reduction. The catalyst was recyclable for more than seven cycles without any significant loss in its catalytic performance. The recycled catalyst was further studied using XRD, FTIR, SEM, and TGA analyses to investigate the structural changes that occurred during the reaction. The catalyst maintained its structural integrity even after seven cycles.

Catalytic synthesis of new pyrazolo [3,4-b] pyridine via a cooperative vinylogous anomeric-based oxidation

In this study, a novel nano-magnetic metal-organic frameworks based on Fe3O4 namely Fe3O4@MIL-101(Cr)-N(CH2PO3)2 was synthesized and fully characterized. The prepared sample was used as catalyst in the synthesis of pyrazolo [3,4-b] pyridines as convenient medicine by condensation reaction of aldehydes, 5-(1H-Indol-3-yl)- 2H-pyrazol-3-ylamine and 3-(cyanoacetyl)indole via a CVABO. The products were obtained with high yields at 100 °C and under solvent-free conditions.

Synthesis of 3-methyl-4H-benzo[b][1,4]thiazine-2-carboxylates using CAN as a catalyst and its conversion into guanidines

Background:

1,4-benzothiazine carboxylates show wide application in the field of medicinal chemistry. Therefore, we have designed convenient and efficient method for the synthesis of 1,4-benzothiazine carboxylates.

Objective:

Synthesis of 1,4-benzothiazine carboxylates and its guanidines by simple and facile method using efficient catalyst.

Method:

Derivatives of 1,4-benzothiazine carboxylates were synthesized by cyclocondensing β-keto esters with 2- aminobenzenethiols using CAN as a catalyst at room temperature. 1,4-benzothiazine caboxylate,condensed with guanidine hydrochloride in the presence of sodium methoxide in DMF to obtained new 3-substituted-l-4Hbenzo[b][1,4]thiazine-2-carboxyguanidines (88-91%).

Results:

All the products were obtained with good to excellent yields within 40 min. Here, CAN oxidizes aminothiophenol into disulfide and then nucleophilic attack of enolic form of β-ketoesters on the disulphide and 1, 4-benzothiazine acetates, were obtained with good yields.

Conclusion:

We have designed convenient and efficient method for the synthesis of 1,4-benzothiazine carboxylates. Most remarkable features of this cyclocondensation such as use of efficient catalyst and non-volatile solvent under mild reaction condition to obtained excellent yield.