3D/3D Bamboo Charcoal/Bi2WO6 Bifunctional Photocatalyst for Degradation of Organic Pollutants and Efficient H2 Evolution Coupling with Furfuryl Alcohols Oxidation

Photocatalysis is one of the most promising pathways to relieve the environmental contamination caused by the rapid development of modern technology. In this work, we demonstrate a green manufacturing process for the 3D/3D rod-shaped bamboo charcoal/Bi2WO6 photocatalyst (210BC-BWO) by controlled carbonization temperature. A series of morphology characterization and properties investigations (XRD, SEM, UV-vis DRS, transient photocurrent response, N2 absorption-desorption isotherms) indicate a 210BC-BWO photocatalyst with higher charge separation efficiency, larger surface area, and better adsorption capacity. The excellent photocatalytic performance was evaluated by degrading rhodamine B (RhB) (98.5%), tetracycline hydrochloride (TC-HCl) (77.1%), and H2 evolution (2833 μmol·g-1·h-1) coupled with furfuryl alcohol oxidation (3097 μmol·g-1·h-1) under visible light irradiation. In addition, the possible mechanisms for degradation of organic pollutants, H2 evolution, and furfuryl alcohol oxidation were schematically investigated, which make it possible to exert photocatalysis by increasing the active radical. This study shows that the combination of bamboo charcoal and bismuth tungstate can be a powerful photocatalyst that rationally combines H2 evolution coupled with furfuryl alcohol oxidation and degradation of pollutants.

Tungsten-based nanocatalysts with different structures for visible light responsive photocatalytic degradation of bisphenol A

Environmental pollution, such as water contamination, is a critical issue that must be absolutely addressed. Here, three different morphologies of tungsten-based photocatalysts (WO3 nanorods, WO3/WS2 nanobricks, WO3/WS2 nanorods) are made using a simple hydrothermal method by changing the solvents (H2O, DMF, aqueous HCl solution). The as-prepared nanocatalysts have excellent thermal stability, large porosity, and high hydrophilicity. The results show all materials have good photocatalytic activity in aqueous media, with WO3/WS2 nanorods (NRs) having the best activity in the photodegradation of bisphenol A (BPA) under visible-light irradiation. This may originate from increased migration of charge carriers and effective prevention of electron‒hole recombination in WO3/WS2 NRs, whereby this photocatalyst is able to generate more reactive •OH and •O2- species, leading to greater photocatalytic activity. About 99.6% of BPA is photodegraded within 60 min when using 1.5 g/L WO3/WS2 NRs and 5.0 mg/L BPA at pH 7.0. Additionally, the optimal conditions (pH, catalyst dosage, initial BPA concentration) for WO3/WS2 NRs are also elaborately investigated. These rod-like heterostructures are expressed as potential catalysts with excellent photostability, efficient reusability, and highly active effectivity in different types of water. In particular, the removal efficiency of BPA by WO3/WS2 NRs reduces by only 1.5% after five recycling runs and even reaches 89.1% in contaminated lake water. This study provides promising insights for the nearly complete removal of BPA from wastewater or different water resources, which is advantageous to various applications in environmental remediation.

In-situ growth of MOF-derived Co3S4@MoS2 heterostructured electrocatalyst for the detection of furazolidone

The over-exploitation of antibiotics in food and farming industries ruined the environmental and human health. Consequently, electrochemical sensors offer significant advantages in monitoring these compounds with high accuracy. Herein, MOF-derived hollow Co3S4@MoS2 (CS@MS) heterostructure has been prepared hydrothermally and applied to fabricate an electrochemical sensor to monitor nitrofuran class antibiotic drug. Various spectroscopic methodologies have been employed to elucidate the structural and morphological information. Our prepared electrocatalyst has better electrocatalytic performance than bare and other modified glassy carbon electrodes (GCE). Our CS@MS/GCE sensor exhibited a highly sensitive detection by offering a low limit of detection, good sensitivity, repeatability, reproducibility, and stability results. In addition, our sensor has shown a good selectivity towards the target analyte among other potential interferons. The practical reliability of the sensor was measured by analyzing various real-time environmental and biological samples and obtaining good recovery values. From the results, our fabricated CS@MS could be an active electrocatalyst material for an efficient electrochemical sensing application.

Hydrothermally Synthesized Z-Scheme Nanocomposite of ZIF-9 Modified MXene for Photocatalytic Degradation of 4-Chlorophenol

4-Chlorophenol (4CP) is a well-known environmental contaminant often detected in wastewater, generally arising from industrial processes such as chemical manufacture, pharmaceutical production, and pesticide formulation. 4CP is a matter of great concern since it is persistent and has the potential to have harmful impacts on both aquatic ecosystems and human health, owing to its hazardous and mutagenic properties. Hence, degradation of 4CP is of utmost significance. This research investigates the photocatalytic degradation of 4CP using a novel Z-scheme heterojunction nanocomposite composed of MXene and ZIF-9. The nanocomposite is synthesized through a two-step hydrothermal method and thoroughly characterized by using XRD, SEM, UV-visible spectroscopy, zeta potential, and electrochemical impedance spectroscopy studies, confirming successful fabrication with improved surface properties. The comparative photocatalytic degradation studies between pristine materials and the nanocomposite were performed, and significant enhancement in performance was observed. The effect of pH on the degradation efficiency is also explored and correlated with the surface charge. The Z-scheme photocatalysis mechanism is proposed, which is supported by time-resolved photoluminescence studies and scavenger experiments. The reusability of the nanocomposite is also evaluated. The study contributes to the development of efficient and sustainable photocatalysts for wastewater treatment.

Fabrication of UiO-66/GCN, a Hybrid Photocatalyst, for Effective Degradation of Ciprofloxacin, Toxicity Estimation, and Its Antibacterial Activity

Fabrication of a metal-organic framework-based photocatalyst has been gaining much interest due to its higher surface area and reasonable band gap, enhancing its photocatalytic activity. This study attempted a facile synthesis of the hybrid photocatalyst UiO-66 doped with graphitic carbon nitride (GCN) by a simple solvothermal method. This composite minimized the drawback related to photogenerated charge transfer and recombination and helped the absorption of visible light. The material was investigated by using various instrumental techniques. In this work, ciprofloxacin (CIP), a fluoroquinolone drug, was chosen as a target micropollutant, and a photodegradation experiment was carried out by using UiO-66, GCN, and UiO-66/GCN under a visible light source, which exhibited 81.85, 69.48, and 93.60% of degradation, respectively. Finally, liquid chromatography mass spectrometry analysis and theoretical computation were carried out to identify the CIP degradation mechanism, and T.E.S.T. software was used to investigate the toxicity of the intermediate products. Apart from photocatalytic activity, the prepared material was also tested for its antibacterial properties against Staphylococcus aureus and Escherichia coli.

Reduced electron/hole recombination in Z-scheme nanostructure of zeolitic imidazolate framework-11/graphitic carbon nitride as photocatalyst under visible light

In this research, for the first time, the synthesis of nanostructure of zeolitic imidazolate framework-11/graphitic carbon nitride (ZIF-11/g-C3N4 X) with different weight of g-C3N4 (X: 0.01, 0.1, 0.3 g) is reported. Their performance was compared in photocatalytic degradation of MB under visible light. Synthetic samples were characterized by X-Ray diffraction (XRD), Fourier-transform infrared spectroscopy (FTIR), X-ray photoelectron spectrometer (XPS), diffused reflectance spectroscopy (DRS), Field emission scanning electron microscopy (FE-SEM), Transmission electron microscope (TEM), Brunauer-Emmett-Teller (BET), Electrochemical Impedance Spectroscopy (EIS) and Photoluminescence (PL) analysis. Based on the results, Z-scheme ZIF-11/g-C3N4 0.3 was selected as the best sample. FESEM and TEM images indicated that g-C3N4 sheets were complicated on the surface of ZIF-11 with rhombic dodecahedron (RHO) morphology. The surface area and band gap of ZIF-11/g-C3N4 0.3 was determined as 174.5 m2/g and 2.58 eV, respectively. The recombination of charge carriers in the ZIF-11/g-C3N4 0.3 nanostructure was reduced. Photocatalytic degradation efficiency of MB (5 ppm), pH = 7, visible irradiation (120 W-60 min) using 0.1 g of ZIF-11/g-C3N4 0.3 was achieved 72.7% with first-order kinetic model and acceptable stability in three consecutive cycles. Further, the total organic carbon (TOC) removal rate by ZIF-11/g-C3N4 0.3 after 5 h were 66.5%.

Design and Synthesis of NTU-9/C3N4 Photocatalysts: Effects of NTU-9 Content and Composite Preparation Method

Hybrid materials based on graphitic carbon nitride (g-C₃N₄) and NTU-9 metal-organic frameworks (MOF) were designed and prepared via solvothermal synthesis and calcination in air. The as-prepared photocatalysts were subsequently characterized using Brunauer-Emmett-Teller (BET) analysis, UV-Vis diffuse reflectance spectroscopy (DRS), photoluminescence (PL) emission spectroscopy, X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and scanning electron microscopy (SEM). The obtained NTU-9/C₃N₄ composites showed a greatly improved photocatalytic performance for the degradation of toluene in the gas phase under LED visible-light irradiation (λ_max = 415 nm). The physicochemical properties and photocatalytic activities of the obtained NTU-9/C₃N₄ materials were tuned by varying the NTU-9 content (5-15 wt%) and preparation method of the composite materials. For composites prepared by calcination, the photocatalytic activity increased with decreasing NTU-9 content as a result of the formation of TiO₂ from the MOFs. The best photocatalytic performance (65% of toluene was photodegraded after 60 min) was achieved by the NTU-9/C₃N₄ sample prepared via the solvothermal method and containing 15 wt% MOF, which can be attributed to the appropriate amount and stable combination of composite components, efficient charge separation, and enhanced visible-light absorption ability. The photocatalytic mechanisms of the prepared hybrid materials depending on the preparation method are also discussed.

g-C3N4-modified Zr-Fc MOFs as a novel photocatalysis-self-Fenton system toward the direct hydroxylation of benzene to phenol

In order to explore a green, economic, and sustainable phenol production process, a heterojunction semiconductor materials g-C₃N₄/Zr-Fc MOF was synthesized via an in situ synthesis method. With the synergistic effect of photocatalysis and the Fenton effect, the composite could effectively catalyze the direct hydroxylation of benzene to phenol under visible light irradiation. The yield of phenol and the selectivity were 13.84% and 99.38% under the optimal conditions, respectively, and it could still maintain high photocatalytic activity after 5 photocatalytic cycles. Therefore, the designed photocatalysis-self-Fenton system has great potential in the field of the direct hydroxylation of benzene to phenol.

Integrating Ultrasmall Pd NPs into Core-Shell Imidazolate Frameworks for Photocatalytic Hydrogen and MeOH Production

The construction of photoactive units in the proximity of a stable framework support is one of the promising strategies for uplifting photocatalysis. In this work, the ultrasmall Pd NPs implanted onto core-shell (CS) metal organic frameworks (MOFs), i.e., CS@Pd nanoarchitectures with tailored electronic and structural properties are reported. The all-in-one heterogeneous catalyst CS@Pd3 improves the surface functionalities and exhibits an outstanding hydrogen evolution reaction (HER) activity rate of 12.7 mmol g^-1 h^-1, which is 10-folds higher than the pristine frameworks with an apparent quantum efficiency (AQE) of 9.02%. The bifunctional CS@Pd shows intriguing results when subjected to photocatalytic CO₂ reduction with an impressive rate of 71 μmol g^-1 h^-1 of MeOH under visible-light irradiation at ambient conditions. Spectroscopic data reveal efficient charge migrations and an extended lifetime of 2.4 ns, favoring efficient photocatalysis. The microscopic study affirms the formation of well-ordered CS morphology with precise decoration of Pd NPs over the CS networks. The significance of active Pd and Co sites is addressed by congruent charge-transfer kinetics and computational density functional theory calculations of CS@Pd, which validate the experimental findings with their synergistic involvement in improved photocatalytic activity. This present work provides a facile and competent avenue for the systematic construction of MOF-based CS heterostructures with active Pd NPs.

Metal-free phosphorus and boron-doped graphitic carbon nitride/zeolite hetero-linked particles for highly efficient green hydrogen production in methanol

Herein, the development of phosphorus and boron-doped graphitic carbon nitride/zeolite (P- and B-doped g-C₃N₄-zeolite) catalyst under three-step heating conditions was performed. The first step is to prepare g-C₃N₄ synthesis from urea at 500 °C. In the second step, the production of a B-doped zeolite-g-C₃N₄ catalyst by calcination of g-C₃N₄ and zeolite was obtained at a ratio of 1:1 with boric acid at 500 °C. In the third step, the obtained B-doped zeolite- g-C₃N₄ catalyst consists of the preparation of B- and P-doped g-C₃N₄-zeolite catalyst as a result of the hydrothermal method with phosphoric acid. Characterization studies of the obtained catalysts were carried out with X-ray powder diffraction (XRD), scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDS), X-ray photoelectron spectroscopy (XPS), and Fourier-transform infrared spectroscopy (FTIR). These obtained catalysts were used as a metal-free catalyst in the production of hydrogen (H₂-P) by sodium borohydride in methanol(NaBH₄-MR) for the first time in the literature. The hydrogen production rate (HGR) value for P- and B-doped g-C₃N₄-zeolite catalysts was 6250 ml min^-1 g^-1.

Highly efficient degradation of reactive black KN-B dye by ultraviolet light responsive ZIF-8 photocatalysts with different morphologies

Zeolitic imidazolate framework ZIF-8, a type of metal-organic framework, has diverse applications in multiple catalytic fields due to its outstanding properties. Herein, ZIF-8 photocatalysts with three different morphologies (dodecahedral, pitaya-like, and leaf-like) are successfully synthesized under ambient conditions from zinc salts by altering the volume ratio of methanol and water used as a solvent. The as-synthesized ZIFs have high crystallinity with distinct BET surface areas. The experiments indicate that the ZIFs have high photocatalytic efficiency, in which the leaf-like structure (ZIF-8-F3) is the most efficient in the degradation of reactive black KN-B dye (RB5) under 365 nm UV irradiation. This is due to the efficient inhibition of electron-hole recombination or the higher migration of charge carriers in ZIF-8-F3, thus producing more reactive oxygen species, resulting in greater photocatalytic efficiency. At pH = 11, more than 95% of RB5 is degraded within 2 hours when using 1.0 g L^-1 of ZIF-8-F3. Besides, the photocatalytic and kinetic performances of ZIF-8-F3 are also investigated by optimizing the pH, initial RB5 concentration, and dosage of the used catalyst. These ZIF-8-F3 plates have been shown to be a promising material with high photostability and effective reusability, beneficial to various potential applications in environmental remediation issues.

Ternary nanocomposites of CdS/WO3/g-C3N4 for hydrogen production

The sustainable rise in global warming and the consumption of fossil fuels considerably contribute to energy and environmental issues. To address these issues, semiconductor heterostructures can be used to generate clean energy sources as alternative energy sources and to reduce environmental impacts. Herein, we report the synthesis of a ternary semiconductor of the CdS/WO₃/g-C₃N₄ (i.e. C-CNW) nanostructured composite for hydrogen production and dye degradation under visible-light irradiation. The structural properties of the prepared materials were studied using a series of investigational analyses. The 3C-CNW nanostructure photocatalyst exhibited faster malachite green (MG) dye photodegradation within 105 min and the highest hydrogen production rate is 868.23 μmol g^-1 h^-1 under visible light illumination. Moreover, the photocatalytic hydrogen production of the 3C-CNW nanostructure photocatalyst with various scavengers was analyzed. Its higher photocatalytic activity is ascribed to the Z-scheme mechanism, which induces rapid diffusion of photoinduced charges within the ternary photocatalyst with its optical bandgap. This proposed strategy is useful to improve photocatalysts that play a role in mitigating energy and environmental issues.

Recent Advances in g-C3N4-Based Materials and Their Application in Energy and Environmental Sustainability

Graphitic carbon nitride (g-C₃N₄), with facile synthesis, unique structure, high stability, and low cost, has been the hotspot in the field of photocatalysis. However, the photocatalytic performance of g-C₃N₄ is still unsatisfactory due to insufficient capture of visible light, low surface area, poor electronic conductivity, and fast recombination of photogenerated electron-hole pairs. Thus, different modification strategies have been developed to improve its performance. In this review, the properties and preparation methods of g-C₃N₄ are systematically introduced, and various modification approaches, including morphology control, elemental doping, heterojunction construction, and modification with nanomaterials, are discussed. Moreover, photocatalytic applications in energy and environmental sustainability are summarized, such as hydrogen generation, CO₂ reduction, and degradation of contaminants in recent years. Finally, concluding remarks and perspectives on the challenges, and suggestions for exploiting g-C₃N₄-based photocatalysts are presented. This review will deepen the understanding of the state of the art of g-C₃N₄, including the fabrication, modification, and application in energy and environmental sustainability.

Design and application of g-C3N4-based materials for fuels photosynthesis from CO2 or H2O based on reaction pathway insights

Photocatalytic CO2 reduction reaction (CRR) and hydrogen evolution reaction (HER) based on graphitic carbon nitride (g-C3N4) that is regarded as the metal-free "holy grail" photocatalyst, provide promising strategies for producing next-generation fuels, contributing to achieving carbon neutrality, alleviating energy and environment crisis. However, the activity of CRR and HER over g-C3N4 leaves much to be desired. Therefore, numerous studies have sprung up to enhance photoactivity. A comprehensive understanding of the CRR and HER reaction pathways is crucial for designing g-C3N4-based materials, further promoting efficient fuel production. Different from previous reviews that focus on g-C3N4 modification from the viewpoint of material science. In this review, we divided the multistep processes of CRR and HER into five reaction pathways and summarized the latest advances for improving each pathway of fuels synthesis through CRR or HER. Meanwhile, the existing bottleneck issues of each step were also discussed. Finally, comprehensive conclusions, including the remaining challenges, outlooks, etc., for CRR and HER over g-C3N4 were put forward. We are sure that this review will conduce to the understanding of the structure-activity relationship between CRR, HER processes, and g-C3N4 structure, which can provide the reference for developing high-powered photocatalysts, not confined to g-C3N4.

Enhanced sun light driven photocatalytic activity of Co doped SnO2 loaded corn cob activated carbon for methylene blue dye degradation

SnO₂ with different Co²⁺ doping concentrations and Co (0.075 M): SnO₂ loaded corn cob activated carbon (Co: SnO₂/CCAC) were prepared, and are labelled as CS1, CS2, CS3 and CS2/CCAC, respectively. The CS2/CCAC showed that the particle size (18.76 nm) and band gap (3.50 eV) are reduced with Co²⁺ doping and CCAC loading. Moreover, CS2/CCAC indicate that the decreased PL intensity and its lower value (2.156 kΩ) of impedance from EIS results which indicates the increased separation of the photogenerated e^-/h⁺ pairs. Thus, the result showed that CS2/CCAC maximum degradation efficiency of MB (95.38%) and the photocatalytic mechanism is also discussed.

Hybrid metal organic frameworks as an Exotic material for the photocatalytic degradation of pollutants present in wastewater: A review

In this world, water is considered as the Elixir for all living creatures. Human life rolls with water, and every activity depends upon water. Worldwide water resources are being contaminated due to the elevation in the population count, industrialization and urbanization. Ejection of chemicals by industries and domestic sewages remains the major reason in the destruction of natural water resources. Contaminated water with harmful microbes, chemical dyes, pesticides, and carcinogens are the root cause of many diseases and deaths of living species. In this scenario, researchers engaged in producing ultra components to remove the contaminants. Metal organic frameworks (MOF) are the desired combination of organic and inorganic materials to achieve the required target. MOFs possess unique characteristics like tunable internal structure, porosity, crystallinity and high surface area which enable them for energy and environmental application. For the past years, MOFs are concentrated more as a photocatalyst in the treatment of polluted water. These research studies discuss the improvement of photocatalytic performance of MOF by the incorporation of metals, metal coupled with nanoparticles like polymers, graphene, etc., into it to achieve the enhanced photocatalytic activity by scavenging entire chemicals and harmful microbes to retain the quality of water. The target of this review article is to focus on the state of the art research work on MOFs in photocatalytic water treatment technique.

Controlled hydrothermal synthesis of BiOxCly/BiOmBrn/g-C3N4 composites exhibiting visible-light photocatalytic activity

The first systematic synthesis of bismuth oxychloride/bismuth oxybromide/graphitic carbon nitride (BiO_xCl_y/BiO_mBr_n/g-C₃N₄) nano-composites used a controlled hydrothermal method. The structure, morphology and characteristic of BiO_xCl_y/BiO_mBr_n/g-C₃N₄ photocatalyst were measured by XRD, UV-vis-DRS, FT-IR, FE-TEM, FE-SEM-EDS, PL, BET, HR-XPS and EPR. Under visible light irradiation, the photodegradation activity was evaluated for the decolorization of crystal violet (CV) and 2-hydroxybenzoic acid (2-HBA) in aqueous solution. The catalytic performance showed that, when using sample BB2C1-4-250-30 wt% g-C₃N₄ composite as a photocatalyst, the best reaction-rate-constant (k) was 0.071 h^-1. It was 1.5 times higher than the k value of BB2C1-4-250 as a photocatalyst. From the scavenging effect of various scavengers, the results of EPR showed that reactive OH was the main scavenger, while O₂^-, h⁺ and ¹O₂ were the second scavenger in CV degradation. In this study, a possible photodegradation mechanism was proposed and discussed. In this work, our method of BiO_xCl_y/BiO_mBr_n/g-C₃N₄ preparation could be used for future mass production and the BiO_xCl_y/BiO_mBr_n/g-C₃N₄ composite materials could be applied to the environmental pollution control in future.

Facile Synthesis of Copper Oxide-Cobalt Oxide/Nitrogen-Doped Carbon (Cu2O-Co3O4/CN) Composite for Efficient Water Splitting

Herein, we report a copper oxide-cobalt oxide/nitrogen-doped carbon hybrid (Cu2O-Co3O4/CN) composite for electrochemical water splitting. Cu2O-Co3O4/CN is synthesized by an easy two-step reaction of melamine with Cu2O-Co3O4/CN composite. The designed composite is aimed to solve energy challenges by producing hydrogen and oxygen via electrochemical catalysis. The proposed composite offers some unique advantages in water splitting. Carbon imparts superior conductivity, while the water oxidation abilities of Cu2O and Co3O4 are considered to constitute a catalyst. The synthesized composite (Cu2O-Co3O4/CN) is characterized by SEM, EDS, FTIR, TEM, and AFM in terms of the size, morphology, shape, and elemental composition of the catalyst. The designed catalyst’s electrochemical performance is evaluated via linear sweep voltammetry (LSV) and cyclic voltammetry (CV). The Cu2O-Co3O4/CN composite shows significant electrocatalytic activity, which is further improved by introducing nitrogen doped carbon (current density 10 mA cm−2, onset potential 91 mV, and overpotential 396 mV).

Recent progress in g-C3N4, TiO2 and ZnO based photocatalysts for dye degradation: Strategies to improve photocatalytic activity

Water contamination by dyes is a matter of concern for human health and the environment. Various methods (membrane separation, coagulation and adsorption) have been explored to remove/degrade dyes. However, now the exploitation of semiconductor assisted materials using renewable solar energy has emerged as a potential candidate to resolve the issue. Although, single component photocatalysts (ZnO, TiO₂, ZrO₂) were experimented, due to their low efficiency and stability due to the high recombination rate electron-hole pair and inefficient visible light absorption, composites of semiconductor materials are being used. Semiconductor heterojunction systems are developed by coupling two or more semiconductor components. The synergistic effect of their properties, such as adsorption and improved charge carrier migration, is observed to increase overall stability. This review covers recent progress in advanced nanocomposite materials based on g-C₃N₄, TiO₂ and ZnO used as photocatalysts with details of enhancing the photocatalytic properties by heterojunctions, crystallinity and doping. The conclusion at the end displays a summary, research gaps and future outlook. A holistic analysis of recent progress to demonstrate the efficient heterojunctions for photodegradation with optimal conditions, this review will be helpful for the development of efficient heterostructured systems for photodegradation. This review covers references from the year 2017-2020.