Imine-Decorated Copper-Based Metal-Organic Framework for the Photodegradation of Methylene Blue

A low cost imine-decorated linker, 4,4'-(hydrazine-1,2-diylidenedimethylylidene)dibenzoic acid was utilized for the preparation of copper-based metal-organic framework (MOF) denoted as Cu-L via a solvothermal technique. The synthesized MOF material has been fully characterized by different analytical techniques such as Fourier-transform infrared (FT-IR) spectroscopy, powder X-Ray diffraction (PXRD), scanning electron microscopy (SEM), energy dispersive X-Ray spectroscopy (EDX), nitrogen adsorption-desorption isotherm analysis, and thermogravimetric analysis (TGA). It has been found that the coordination of Cu2+ with L considerably reduced the band gap of the L of nearly about 1 eV, which is approximately 26% decline in total. Notably, a narrow band gap of the photocatalyst is an essential requirement for the proficient photodegradation of organic contaminants. An excellent optical properties and narrow band gap of (2.8 eV) of Cu-L ensure their suitability as a photocatalyst for the degradation of methylene blue (MB) dye. In the presence of Cu-L photocatalyst, 84.22% degradation of MB dye was observed after 150 min under sunlight exposure. It is the first time that imine-functionalized MOF was utilized for the degradation of MB dye under sunlight irradiation. For understanding the photodegradation of MB dye by the Cu-L photocatalyst, all the plausible mechanistic studies have been carried out in detail. Both theoretical (with the help of density functional theory (DFT) calculations) as well as experimental studies have been conducted to justify the possible mechanisms for the photodegradation of MB dye by Cu-L. The current work may open a new opportunity to construct a cheap MOF-based photocatalysts for fast degradation of dye contaminants.

Comparative study of antioxidant and antimicrobial activity of berberine-derived Schiff bases, nitro-berberine and amino-berberine

In recent years, the scientific community has focused on traditional natural products and their potential therapeutic benefits. Berberine is a plant-derived isoquinoline alkaloid with a variety of biological properties and identified as a promising pharmacophore for discovering new therapeutic agents against various diseases. However, unfavorable pharmacokinetic properties of berberine have limited its clinical application so much that researchers pursue its structure modification to overcome this problem. This study focuses on the synthesis of new berberine derivatives to improve its antioxidant and antimicrobial potentials, which were characterized using CHNO and NMR instruments. Berberine extracted from barberry root was nitrated, reduced to amine and condensed with benzaldehyde derivatives to produce berberine-based Schiff bases. The H atom donating ability of all compounds was measured against DPPH free radicals, with IC50 values ranging from 18.28 to 108.20 μg ml-1. All berberine-based Schiff bases exhibited stronger antioxidant activity than nitro-berberine and amino-berberine. Only Schiff base derived from 4-hydroxybenzaldehyde showed slightly better antioxidant effects than original berberine. The inhibitory effects of the synthesized compounds were evaluated against important pathogenic fungal and bacterial strains using disk diffusion assays, with inhibition zone diameters ranging from 8.36 to 25.48 μg ml-1. Berberine itself only affected Candida albicans fungus. Nitrated berberine was effective against all microorganisms except Gram-negative Acinetobacter baumannii. The results suggest that structural modifications and functionalization can enhance the antimicrobial and antioxidant properties of berberine.

Loading of green-synthesized cu nanoparticles on Ag complex containing 1,3,5-triazine Schiff base with enhanced antimicrobial activities

The physicochemical properties of materials change significantly in nanometer dimensions. Therefore, several methods have been proposed for the synthesis of nanoparticles. Plant extracts and essential oils are applied as natural and economic resources to prepare nanomaterials especially metal nanoparticles. In this project, a green, simple and efficient method has been designed for the synthesis of Cu nanoparticles using Purple cabbage extract as a reducing and stabilizing agent. They were successfully loaded onto a new Ag complex containing 1,3,5-triazine Schiff base as ligand to form Cu@Ag-CPX nanocomposite. Phytochemical contents of extract were identified by standard qualitative analyses. The chemical structure of all synthesized compounds was characterized using spectral data. In FT-IR, coordination of C=N bond of Schiff base ligand to Ag+ ions shifted the absorption band from 1641 to 1632 cm-1. The UV-Vis spectrum of Cu@Ag-CPX nanocomposite shown the peak related to Cu nanoparticles in the region of around 251 nm. 5:7 molar ratio of Cu to Ag in Cu@Ag-CPX was determined using ICP-OES. The FESEM, TEM, and DLS techniques provided valuable insights into the morphology and size distribution of the nanocomposite, revealing the presence of rods and monodispersed particles with specific diameter ranges. These analyses of the nanocomposite displayed rods with diameters from 40 to 62 nm as well as monodispersed and uniform particles with average diameter of 45 nm, respectively. The presence of elements including carbon, nitrogen, oxygen, Cu and Ag was proved by EDX-EDS analysis. The XRD pattern of Cu@Ag-CPX shown the diffraction peaks of Cu and Ag particles at 2θ values of 10°-80°, and confirmed its crystalline nature. The inhibitory properties of the synthesized compounds were evaluated in vitro against four Gram-negative and two Gram-positive bacteria, as well as two fungal strains. The MIC, MBC and MFC values obtained from microdilution and streak plate sensitivity tests were ranged from 128 to 4096 µg ml-1. While Cu nanoparticles and Ag complexes were effective against some pathogens, they were not effective against all them. However, the growth of all tested microbial strains was inhibited by Cu@Ag-CPX nanocomposite, and makes it as a new promising antimicrobial agent. Modification of nanocomposite in terms of nanoparticle and complex can improve its blocking activities.

Advances in the greener synthesis of chromopyrimidine derivatives by a multicomponent tandem oxidation process

A hydrophilic cobalt/copper heterogeneous bimetallic catalyst named mTEG-CS-Co/Cu-Schiff-base/IL was successfully synthesized from chitosan polysaccharide. The new catalyst was investigated and confirmed using various techniques including FT-IR, FE-SEM, EDX-EDS, XRD, TEM, TGA, AFM, NMR and ICP. The catalyst exhibited powerful catalyst activity for the tandem one pot oxidative chromopyrimidine reaction from benzyl alcohols under mild conditions, utilizing air as a clean source in a green protocol. The catalyst was compatible with a wide range of benzyl alcohols, and aldehydes formed in situ, and bis-aldehydes synthesized were condensed with urea/4‑hydroxycumarin to provide favorable products in good yields for all derivatives (14 new derivatives). The presence of tri-ethylene glycol and imidazolium moieties with hydrophilic properties on the mTEG-CS-Co/Cu-Schiff-base/IL nanohybrid provides dispersion of the nanohybrid particles in water, leading to higher catalytic performance. Furthermore, the reaction exhibited several other notable features, including low catalyst loading, the ability to be recycled for up to 6 stages, high atom economy, a simple work procedure, short reaction time, utilization of an environmentally friendly nanohybrid, and the replacement of volatile and organic solvents with water solvent.

CoFe2O4@SiO2-NH2@MOF-5 magnetic nanocatalyst for the synthesis of biologically active quinazoline derivatives

Metal-organic frameworks (MOFs) offered excellent catalytic activity due to their superior porosity, and high densities of catalytic sites in remarkable specific surfaces. In this research, we prepared a magnetic nanocomposite based on MOF-5 which is one of the prominent and practical structures that have been reported in many applications, and investigated the advantages of it as a catalyst. The multi-functional catalyst was prepared in five steps including (1) preparation of cobalt ferrite nanoparticles (CoFe2O4), (2) surface modification of cobalt ferrite using tetraethyl orthosilicate, (3) surface functionalization using 3-aminopropyl triethoxysilane, (4) preparation of MOF-5, (5) preparation of CoFe2O4@SiO2-NH2@MOF-5 nanocomposite. The resulting catalyst was evaluated by FTIR, FESEM, EDX, XRD, and VSM analyses. The CoFe2O4@SiO2-NH2@MOF-5 nanocomposite was applied as a catalyst for the quinazoline derivatives' synthesis. Various products were prepared with significant yields (90-98%) in short reaction times (20-60 min) without difficult work-up. In addition, the magnetic behavior of the catalyst allows it to be collected and recycled by a magnet and applied for six consecutive cycles without significantly reducing its efficiency. Quinazoline derivatives showed significant biological activities so their antioxidant activity was between 23.7% and 88.9% and their antimicrobial activity was in contradiction of E. coli, S. enterica, L. monocytogenes, S. aureus, and E. faecalis.

Amino-induced cadmium metal-organic framework based on thiazole ligand as a heterogeneous catalyst for the epoxidation of alkenes

Selective epoxidation of olefins is of high interest in the chemical industry due to the many applications of epoxides. This study reports on the synthesis of Cd-MOF, [Cd(DPTTZ)(5-AIP)] (IUST-1) (where DPTTZ = 2, 5-di (pyridine-4-yl) thiazolo [5, 4-d] thiazole, 5-AIP = 5-Aminoisophthalic acid), by a reflux method, which can be considered as a fast and simple process. The morphology and structure of the synthesized IUST-1 were determined by using FE-SEM (Field Emission Scanning Electron Microscopy), EDX (Energy Dispersive Analysis of X-ray), Mapping (Elemental Mapping), CHNS (Elemental analysis), XRD (X-Ray Diffraction), FT-IR (Fourier Transform Infrared), and TGA (Thermo Gravimetric Analysis). The epoxidation of cyclooctene was investigated using the activity of catalytic IUST-1. The results showed that in the presence of tert-butyl hydroperoxide and CCl4 in a 1:2 alkene/oxidant ratio, a high epoxide yield (99.8%) was obtained. In addition, IUST-1 can be easily separated by simple filtration and recycled five times successfully with a slight decrease in activity. This compound has some advantages such as high yield, short reaction time, and ease of reuse, which make it a suitable heterogeneous catalyst for the epoxidation of cyclooctene.

TiO2/g-C3N4/SO3H(IL): Unique Usage of Ionic Liquid-Based Sulfonic Acid as an Efficient Photocatalyst for Visible-Light-Driven Preparation of 5-HMF from Cellulose and Glucose

Upgrading of biomass wastes to value-added materials has been incessantly pursued worldwide with diverse applications, especially deploying photocatalytic composites encompassing metal oxides with acidic and carbon compounds. Herein, the fabrication of a morphologically unique acidic catalyst encompassing a two-dimensional (2D) TiO₂/g-C₃N₄ heterojunction feature is described for the generation of 5-hydroxymethylfurfural (5-HMF), which exploits the acidic/ionic liquid (IL) bifunctional photocatalysis under visible light. The structural integrity of the synthesized TiO₂/g-C₃N₄/SO₃H(IL) was corroborated by Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), energy-dispersive X-ray spectroscopy-energy-dispersive spectroscopy (EDX-EDS), X-ray photoelectron spectroscopy (XPS), thermogravimetric analysis (TGA), field emission scanning electron microscopy (FESEM), UV-vis, Tauc plots, transmission electron microscopy (TEM), and Brunauer-Emmett-Teller-Barrett-Joyner-Halenda (BET-BJH) analyses. Keeping environmental impact in mind, there are compelling advantages in the development of bio-derived pathways to access ILs from natural renewable resources. The outcomes of environmental assessments have revealed that the incorporation of TiO₂ in g-C₃N₄ and ClSO₃H can reduce the probability of recombination due to ionic charges present, therefore enhancing the photocatalytic activity via the transformation of cellulose and glucose to produce 5-HMF in higher yields, with the optimum conditions being reaction in water under a blue light-emitting diode (LED), at 100 °C, for 1-1.5 h. The main advantages of this production method include minimum number of synthetic steps as well as ample availability of and easy access to primary ingredients. While a significant volume of 5-HMF was produced under blue light-emitting diode (LED) radiation, the selectivity was drastically reduced in the dark. The salient attributes of the catalyst comprise stability in air, robustness, reusability, and its overall superior activity that is devoid of hazardous additives or agents. This inimitable method has uncovered a newer strategy for enhancing the photocatalytic attributes of deployed semiconducting materials for numerous photocatalytic functions while adhering to the tenets of environmental friendliness.

A Luminescent Cu(II)-MOF with Lewis Basic Schiff Base Sites for the Highly Selective and Sensitive Detection of Fe3+ Ions and Nitrobenzene

A Schiff base functionalized Cu(II)-based metal-organic framework (MOF) denoted as Cu-L, was developed via a solvothermal method using low-cost starting material, i.e., Schiff base linker, 4,4'-(hydrazine-1,2-diylidenedimethylylidene)dibenzoic acid (L). Good crystallinity and thermal stability of synthesized Cu-L was confirmed by the crystallographic and thermogravimetric studies. An excellent photoluminescent properties of Cu-L ensure their suitability for the ultrafast detection of Fe³⁺ ions and nitrobenzene via a turn-off quenching response. The remarkable sensitivity of Cu-L towards Fe³⁺ ions and nitrobenzene was certified by the low limit of detection (LOD) of 47 ppb and 0.004 ppm, respectively. With incorporated free azine groups, this MOF could selectively capture Fe³⁺ ions and nitrobenzene in aqueous solution. The plausible mechanistic pathway for the quenching in the fluorescence intensity of the Cu-L in the presence of Fe³⁺ ions and nitrobenzene have been explained in detail through the density functional theory calculations, photo-induced electron transfer (PET), fluorescence resonance energy transfer (FRET), and competitive energy adsorption. This present study open a new avenue to synthesize novel crystalline MOF-based sensing materials from cheap Schiff base linkers for fast sensing of toxic pollutants.

BioMOF-Mn: An Antimicrobial Agent and an Efficient Nanocatalyst for Domino One-Pot Preparation of Xanthene Derivatives

In this paper, a new Mn-based metal-organic framework [UoB-6] was obtained via a one-step ultrasonic irradiation method with the ligand (H₂bdda: 4,4'-(1,4-phenylenebis(azaneylylidene))bis(methaneylylidene))dibenzoic acid. The structural integrity of the synthesized BioMOF-Mn was corroborated by FT-IR, EDX, ICP, XRD, TEM, DLS, FESEM, and BET-BJH analyses. The aerobic oxidative domino reaction of benzyl alcohols or aldehydes with dimedone derivatives was performed in the presence of the UoB-6 catalyst to produce xanthene derivatives in good yields. Hot filtration and Hg poisoning tests proved the heterogeneous nature of the catalyst. Novel synthesized xanthene-based bis-aldehydes were introduced as potent HDAC1 inhibitors according to molecular docking calculations. Finally, the inhibitory activities of Mn-MOF nanoparticles were evaluated on Escherichia coli and Candida albicans. The MIC, MBC, and MFC values were determined from 2048 to 4096 μg·mL^-1 according to antimicrobial susceptibility testing methods. The inhibitory effects of antimicrobial agents can be exacerbated when loaded on BioMOFs.

A Green Synthesis Strategy of Binuclear Catalyst for the C-C Cross-Coupling Reactions in the Aqueous Medium: Hiyama and Suzuki-Miyaura Reactions as Case Studies

Cellulose, as a green and available phytochemical, was immobilized on the surface of magnetite nanoparticles then doped with imidazole and Co. complex (Fe3O4@CNF ∼ ImSBL ∼ Co.) and used as a water-dispersible, recyclable and efficient nano catalyst for the synthesis of C-C cross-coupling reactions including fluoride-free Hiyama and Suzuki reactions in an aqueous medium as an efficient and vital solvent, due to their high application and importance in various fields of science. Different spectroscopic and microscopic techniques were used for the catalyst characterization such XRD, FESEM, TEM, FT-IR, EDX, DLS, VSM, UV-Vis, and ICP analyses. The presence of imidazole as ionic section tags with hydrophilic character on the Co-complex supported on magnetic nanoparticles provides dispersion of the catalyst particles in water, which leads to both higher catalytic performance and also facile catalyst recovery and reuse six times by successive extraction and final magnetic separation. High catalytic activity was found for the catalyst and high to excellent efficiency was obtained for all Suzuki (80-98% yield; E factor: 1.1-1.9) and Hiyama (87-98% yield; E factor: 0.26-1.1) derivatives in short reaction times under mild reaction conditions in the absence of any hazardous or expensive materials. There is not any noticeable by-product found whether for Suzuki or Hiyama derivatives, which reflects the high selectivity and also the lower the E factor the more favorable is the process in view of green chemistry. The bi-aryls were achieved from the reaction of various aryl iodides/bromides and even chlorides as the highly challenging substrates, which are more available and cheaper, with triethoxyphenylsilane or phenylboronic acid. To prove the performance of the catalyst components (synergistic of SBL ∼ Co. and IL), its different homologs were incorporated individually and studied for a model reaction. Exclusively, this is an introductory statement on the use of Cobalt binuclear symmetric ionic liquid catalysts in Hiyama reactions.

Biosynthesis of Organic Nanocomposite Using Pistacia vera L. Hull: An Efficient Antimicrobial Agent

Here presented a quick and easy synthesis of copper nanoparticles (CuNPs). Pistachio hull extract has been used as a reducing and stabilizing agent in the preparation of CuNPs. This biosynthesis is a kind of supporter of the environment because chemical agents were not used to making nanoparticles, and on the other hand, it prevents the release of pistachio waste in nature and its adverse effects on nature. The biosynthesized CuNPs and CuNPs/silver Schiff base nanocomposite (CSS NC) were characterized by UV-VIS spectroscopy, Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), field emission scanning electron microscopy (FE-SEM), and energy-dispersive X-ray spectroscopy (EDS). CuNP and CSS NC antimicrobial activity was examined by both well diffusion and determination MIC methods against four bacteria Staphylococcus aureus, Bacillus cereus, Escherichia coli, and Pseudomonas aeruginosa and two fungi Aspergillus Niger and Candida albicans. CuNPs and CSS NC showed significant antimicrobial activity on the samples, preventing the growth of bacteria and fungi at very low concentrations. CuNPs and CSS NC had the greatest effect on Escherichia coli bacteria and Aspergillus niger fungi. Phenolic compounds are one of the most important antioxidants that are involved in various fields, including pharmacy. Pistacia vera hull is a rich source of phenolic compounds. In this study, the most phenolic compound in Pistacia vera hull is gallic acid and rutin, which has been identified by HPLC analysis. In this study, Pistacia vera hull essential oil analysis was performed by the GC-MS method, in which α-pinene, D-limonene, and isobornyl acetate compounds constitute the highest percentage of Pistacia vera hull essential oil.