Cu (II), Zn (II), and Ce (III) metal complexes as antimicrobial pigments for surface coating and flexographic ink

Preparation and characterization of novel flame-retardant paint of substituted cyclodiphosph(V)azane sulfonomide and their Cu(II), Cd(II) metal complexes as new additives for exterior wood coating protection

The development of flame-retardant materials has become an important research direction. For the past dozen years, researchers have been exploring flame retardants with high flame-retardant efficiency, low toxicity, less smoke, or other excellent performance flame retardants. Therefore, this work aimed to synthesize new cyclodiphosph(V)azane derivatives and their Cu(II) and Cd(II) metal complexes and investigated their potential applications as high flame-retardant efficiency. Various techniques were used to characterize the prepared ligand H2L and its metal complexes, including elemental analyses, mass spectra, conductivity measurements, electronic spectral data UV-vis, FT-IR, 1H,13C-NMR, TGA, XRD, and molecular docking experiments studies were M. tuberculosis receptors (PDB ID: 5UHF) and the crystal structure of human topoisomerase II alpha (PDB ID: 4FM9). Wood-based paint was physically mixed with the ligand H2L and its metal complexes. The obtained results of mechanical characteristics of the dried paint layers were noticed to improve, such as gloss value, which ranged from 85 to 95, hardness 1.5-2.5 kg, adhesion 4B to 5B, and impact resistance, which improved from 1.3 to 2.5 J. Moreover, the obtained results of flame-retardant properties showed a significant retardant impact compared to the blank sample, such as ignitability, which includes the heat flux which increased from 10 to 25 kW/m2, and ignition time, ranging from 550 to 1200 s, respectively, and limiting oxygen index (LOI) (%) which has been increased from 21 to 130 compared with the plywood sample and sample blank. The ordering activity of the observed results was noticed that coated sample based on Cd(II) metal complexes > coated sample based on Cu(II) metal complexes of Cyclophosphazene ligand > coated sample based on phosphazene ligand H2L > coated sample without additives > uncoated sample. This efficiency may be attributed to (1) the H2L is an organophosphorus compound, which contains P, N, Cl, and aromatic six- and five-member ring, (2) Cu(II) and Cd(II) metal complexes characterized by high thermal stability, good stability, excellent performance flame retardants, and wide application.

Fully Integrated Patch Based on Lamellar Porous Film Assisted GaN Optopairs for Wireless Intelligent Respiratory Monitoring

Respiratory pattern is one of the most crucial indicators for accessing human health, but there has been limited success in implementing fast-responsive, affordable, and miniaturized platforms with the capability for smart recognition. Herein, a fully integrated and flexible patch for wireless intelligent respiratory monitoring based on a lamellar porous film functionalized GaN optoelectronic chip with a desirable response to relative humidity (RH) variation is reported. The submillimeter-sized GaN device exhibits a high sensitivity of 13.2 nA/%RH at 2-70%RH and 61.5 nA/%RH at 70-90%RH, and a fast response/recovery time of 12.5 s/6 s. With the integration of a wireless data transmission module and the assistance of machine learning based on 1-D convolutional neural networks, seven breathing patterns are identified with an overall classification accuracy of >96%. This integrated and flexible on-mask sensing platform successfully demonstrates real-time and intelligent respiratory monitoring capability, showing great promise for practical healthcare applications.

A new strategy to integrate silver nanowires with waterborne coating to improve their antimicrobial and antiviral properties

Purpose

This study aims to focus on the preparation and characterization of the silver nanowire (AgNWs), as well as their application as antimicrobial and antivirus activities either with incorporation on the waterborne coating formulation or on their own.

Design/methodology/approach

Prepared AgNWs are characterized by different analytical instruments, such as ultraviolet-visible spectroscope, scanning electron microscope and X-ray diffraction spectrometer. All the paint formulation's physical and mechanical qualities were tested using American Society for Testing and Materials, a worldwide standard test procedure. The biological activities of the prepared AgNWs and the waterborne coating based on AgNWs were investigated. And, their effects on pathogenic bacteria, antioxidants, antiviral activity and cytotoxicity were also investigated.

Findings

The obtained results of the physical and mechanical characteristics of the paint formulation demonstrated the formulations' greatest performance, as well as giving good scrub resistance and film durability. In the antimicrobial activity, the paint did not have any activity against bacterial pathogen, whereas the AgNWs and AgNWs with paint have similar activity against bacterial pathogen with inhibition zone range from 10 to 14 mm. The development of antioxidant and cytotoxicity activity of the paint incorporated with AgNWs were also observed. The cytopathic effects of herpes simplex virus type 1 (HSV-1) were reduced in all three investigated modes of action when compared to the positive control group (HSV-1-infected cells), suggesting that these compounds have promising antiviral activity against a wide range of viruses, including DNA and RNA viruses.

Originality/value

The new waterborne coating based on nanoparticles has the potential to be promising in the manufacturing and development of paints, allowing them to function to prevent the spread of microbial infection, which is exactly what the world requires at this time.

Preparation of new surface coating based on modified oil-based polymers blended with ZnO and CuZnO NPs for steel protection

In our paper, we have synthesized modified PEA and alkyd resin by replacing the new source of polyol (SDEA) which was confirmed by different analyses such as IR, and 1HNMR spectra. A series of conformal, novel, low-cost, and eco-friendly hyperbranched modified alkyd and PEA resins were fabricated with bio ZnO, CuO/ZnO) NPs through an ex-situ method for mechanical and anticorrosive coatings. The synthesized biometal oxides NPs and its composite modified alkyd and PEA were confirmed by FTIR, SEM with EDEX, TEM, and TGA, and can be stably dispersed into modified alkyd and PEA resins at a low weight fraction of 1%. The nanocomposite coating was also subjected to various tests to determine their surface adhesion, which ranged from (4B-5B), physico-mechanical characteristics such as scratch hardness, which improved from < 1.5 to > 2 kg, gloss (100-135) Specific gravity (0.92-0.96) and also chemical resistance test which passed for water, acid, and solvent except alkali, was poor because of the hydrolyzable ester group in the alkyd and PEA resins. The anti-corrosive features of the nanocomposites were investigated through salt spray tests in 5 wt % NaCl. The results indicate that well-dispersed bio ZnO and CuO/ZnO) NPs (1.0%) in the interior of the hyperbranched alkyd and PEA matrix improve the durability and anticorrosive attributes of the composites, such as degree of rusting, which ranged from 5 to 9, blistering size ranged from 6 to 9, and finally, scribe failure, which ranged from 6 to 9 mm. Thus, they exhibit potential applications in eco- friendly surface coatings. The anticorrosion mechanisms of the nanocomposite alkyd and PEA coating were attributed to the synergistic effect of bio ZnO and (CuO/ZnO) NPs and the prepared modified resins are highly rich in nitrogen elements, which might be regarded as a physical barrier layer for steel substrates.

New coating formulation based on synthesized benzodiazepine derivatives as double function additives for industrial application

Purpose

The purpose of this study is to develop a new protective coating formulation for industrial use, using benzodiazepine derivatives as double function additives.

Design/methodology/approach

Benzodiazepine’s derivatives of types (3–5) were prepared and confirmed by infrared, Mass, 1H-Proton nuclear magnetic resonance (NMR) and 13C NMR spectra. The synthesized compound was physically incorporated in the alkyd paint formulation by pebble mill grinding until all particulates are smaller than 20 ums. The prepared coatings were applied by air spray on steel panels. The physical, mechanical characteristics, corrosion resistance and antimicrobial test of the prepared coatings were studied to evaluate the prepared compounds drawbacks.

Findings

The results of the mechanical and physical properties of the paint formulation revealed that the paint formulation incorporating benzodiazepines derivatives 3–5 performed best and improved corrosion-resistance and antibacterial activity tests.

Research limitations/implications

In alkyd paint, heterocyclic compounds are the most used antibacterial additives. Other functionalities of these compounds, such as corrosion inhibitors, might be studied to see if they are suited for these applications.

Practical implications

Because of the activity of various benzodiazepine derivatives, which may be attributable to the presence of some function groups such as sulfonamide aromatic amino NH2 group, and elements such as Sulphur, Nitrogen, Chlorine, in its chemical structure. As a result, paint compositions including these compounds as additives can be used as dual-purpose paint and for a variety of industrial applications.

Originality/value

The research demonstrates how a low-cost paint composition based on synthesized benzodiazepine derivatives 3–5 may be used as a dual-function paint for industrial use.

Preparation of Zinc Oxide Nanoparticles using Aspergillus niger as Antimicrobial and Anticancer Agents

In the current study, zinc oxide nanoparticles (ZnO-NP) were prepared using extracellular extracts of Aspergillus niger. Hence, the morphological structure, optical, and surface features of the synthesized nanoparticles were studied by X-ray diffraction, transmission electron microscopy, ultraviolet-visible and infrared absorption by Fourier transform. Use dynamic light scattering and zeta potential measurements to assess colloidal stability. The mean size of the synthetic particles is approximately 20 ± 5 nm and they have a hexagonal crystal structure. In addition, the prepared nanoparticles have strong light absorption in the ultraviolet region of λ = 265 and 370 nm. To achieve the goal of this study, the efficiency of ZnO-NP was determined as an antibacterial and antifungal against different bacterial and fungal strains. It was found that ZnO-NP showed significant antibacterial activity, where the inhibition zones were varied from 21 to 35mm in diameter against six bacterial species (i.e. K. pneumoniae, E. coli, A. baumannii, P. aeruginosa, S. aureus, and S. haemolyticus). In such a case, the minimal inhibitory concentration of zinc oxide nanoparticles against bacterial strains were 50, 12.5, 12.5, 50, 12.5, and 12.5μg/ml for K. pneumoniae, E. coli, A. baumannii, P. aeruginosa, S. aureus, and S. haemolyticus, respectively. Furthermore, ZnO-NP exhibits an antifungal behaviour against four fungal species (i.e., A. niger, P. marneffei, C. glabrata, and C. parapsilosis) with inhibition zone from 18 to 35mm in diameter. Whereas, the MICs for fungal isolates were 12.5μg/ml except A. niger was at 25μg/ml. Wi-38 cells were treated with ZnO-NPs exhibited different levels of cytotoxicity dependent upon the concentration of ZnO NPs using the MTT assay with IC50~800.42. Therefore, the present study introduces a facile and cost-effective extracellular green-synthesis of ZnO-NP to be used as antimicrobial and anticancer agents.