Remarks on studies for direct production of phenol in conventional and membrane reactors

An iron-containing POM-based hybrid compound as a heterogeneous catalyst for one-step hydroxylation of benzene to phenol

It is a major challenge to perform one-pot hydroxylation of benzene to phenol under mild conditions, which replaces the environmentally harmful cumene method. Thus, finding highly efficient heterogeneous catalysts that can be recycled is extremely significant. Herein, a (POM)-based hybrid compound {[FeII(pyim)2(C2H5O)][FeII(pyim)2(H2O)][PMoV2MoVI9VIV3O42]}·H2O (pyim = 2-(2-pyridyl)benzimidazole) (Fe2-PMo11V3) was successfully prepared by hydrothermal synthesis using typical Keggin POMs, iron ions and pyim ligands. Single-crystal diffraction shows that the Fe-pyim unit in Fe2-PMo11V3 forms a stable double-supported skeleton by Fe-O bonding to the polyacid anion. Remarkably, due to the introduction of vanadium, Fe2-PMo11V3 forms a divanadium-capped conformation. Benzene oxidation experiments indicated that Fe2-PMo11V3 can catalyze the benzene hydroxylation reaction to phenol in a mixed solution of acetonitrile and acetic acid containing H2O2 at 60 °C, affording a phenol yield of about 16.2% and a selectivity of about 94%.

Bio-inspired Cu(II) amido-quinoline complexes as catalysts for aromatic C-H bond hydroxylation

Cu(II) complexes supported by tetradentate amido-quinoline acyclic ligands (L1 & L2) have been synthesized, characterized, and employed as catalysts for aromatic C-H hydroxylation using H₂O₂ as an oxidant in the absence of an external base with a high selectivity of around 90% for phenols via the non-radical pathway (TON ≥720). The KIE value, various spectroscopic studies and DFT calculation supported the involvement of Cu(II)-OOH species.

Metal-Acid Bifunctional Catalysts toward Tandem Reaction: One-Step Hydroalkylation of Benzene to Cyclohexylbenzene

The one-step hydroalkylation of benzene to cyclohexylbenzene (CHB) is a technically challenging and economically interesting reaction with great industrial importance, where bifunctional catalysts play a crucial role in such a tandem reaction. In this work, we report H₃PW₁₂O₄₀ (HPW) modified Ni nanoparticles (NPs) supported on mixed metal oxides (Ni/MMOs), which are featured by HPW species localized on the surface of Ni NPs (denoted as HPW-Ni/MMOs). The optimal catalyst (0.3HPW-Ni/MMOs) exhibits a satisfactory catalytic performance toward benzene hydroalkylation to CHB with a CHB yield of up to 41.2%, which is the highest standard among previously reported catalysts to date. A combination investigation based on HR-TEM, XPS, XANES, and in situ FT-IR verified the electron transfer from the W atom to the adjacent Ni atom, which facilitated the formation and desorption of cyclohexene (CHE) from Ni followed by the alkylation reaction of benzene and CHE at the interfacial Brønsted (B) acid sites of HPW, accounting for the significantly enhanced catalytic behavior. It is proposed that the HPW-Ni interface structure in xHPW-Ni/MMOs samples provides unique adsorption sites for benzene and CHE with a moderate adsorption strength, which serve as the intrinsic active center for this reaction: the Ni site promotes the hydrogenation of benzene to CHE, while the B acid site in HPW facilitates the alkylation of CHE and benzene to produce CHB. This work provides a fundamental understanding of the metal-acid synergistic catalysis toward the hydroalkylation reaction, which can be extended to the design and preparation of high-performance catalysts used in tandem reactions.

Direct Benzene Hydroxylation with Dioxygen Induced by Copper Complexes: Uncovering the Active Species by DFT Calculations

The direct oxidation of benzene into phenol using molecular oxygen at very mild temperatures can be promoted in the presence of the copper complex Tp^Br3Cu(NCMe) in the homogeneous phase in the presence of ascorbic acid as the source of protons and electrons. The stoichiometric nature, relative to copper, of this transformation prompted a thorough DFT study in order to understand the reaction pathway. As a result, the dinuclear species Tp^Br3Cu^II(μ-O^•)(μ-OH)Cu^IITp^Br3 is proposed as the relevant structure which is responsible for activating the arene C–H bond leading to phenol formation.

Direct catalytic benzene hydroxylation under mild reaction conditions by using a monocationic μ-nitrido-bridged iron phthalocyanine dimer with 16 peripheral methyl groups

Direct catalytic benzene hydroxylation under mild reaction conditions was achieved using a monocationic μ-nitrido-bridged iron phthalocyanine dimer with 16 peripheral methyl groups.

One-Step Catalytic or Photocatalytic Oxidation of Benzene to Phenol: Possible Alternative Routes for Phenol Synthesis?

Phenol is an important chemical compound since it is a precursor of the industrial production of many materials and useful compounds. Nowadays, phenol is industrially produced from benzene by the multi-step “cumene process”, which is energy consuming due to high temperature and high pressure. Moreover, in the “cumene process”, the highly explosive cumene hydroperoxide is produced as an intermediate. To overcome these disadvantages, it would be useful to develop green alternatives for the synthesis of phenol that are more efficient and environmentally benign. In this regard, great interest is devoted to processes in which the one-step oxidation of benzene to phenol is achieved, thanks to the use of suitable catalysts and oxidant species. This review article discusses the direct oxidation of benzene to phenol in the liquid phase using different catalyst formulations, including homogeneous and heterogeneous catalysts and photocatalysts, and focuses on the reaction mechanisms involved in the selective conversion of benzene to phenol in the liquid phase.

Cu(I) complexes obtained via spontaneous reduction of Cu(II) complexes supported by designed bidentate ligands: bioinspired Cu(I) based catalysts for aromatic hydroxylation

Copper(i) complexes [Cu(L1-7)2](ClO4) (1-7) of bidentate ligands (L1-L7) have been synthesized via spontaneous reduction and characterized as catalysts for aromatic C-H activation using H2O2 as the oxidant. The single crystal X-ray structure of 1 exhibited a distorted tetrahedral geometry. All the copper(i) complexes catalyzed direct hydroxylation of benzene to form phenol with good selectivity up to 98%. The determined kinetic isotope effect (KIE) values, 1.69-1.71, support the involvement of a radical type mechanism. The isotope-labeling experiments using H218O2 showed 92% incorporation of 18O into phenol and confirm that H2O2 is the key oxygen supplier. Overall, the catalytic efficiencies of the complexes are strongly influenced by the electronic and steric factor of the ligand, which is fine-tuned by the ligand architecture. The benzene hydroxylation reaction possibly proceeded via a radical mechanism, which was confirmed by the addition of radical scavengers (TEMPO) to the catalytic reaction that showed a reduction in phenol formation.

Recent developments in photoredox-catalyzed remote ortho and para C-H bond functionalizations

In recent years, the research area of direct C-H bond functionalizations was growing exponentially not only due to the ubiquity of inert C-H bonds in diverse organic compounds, including bioactive natural and nonnatural products, but also due to its impact on the discovery of pharmaceutical candidates and the total synthesis of intricate natural products. On the other hand, more recently, the field of photoredox catalysis has become an indispensable and unparalleled research topic in modern synthetic organic chemistry for the constructions of challenging bonds, having the foremost scope in academia, pharmacy, and industry. Therefore, the development of green, simpler, and effective methodologies to accomplish direct C-H bond functionalization is well overdue and highly desirable to the scientific community. In this review, we mainly highlight the impact on, and the utility of, photoredox catalysts in inert ortho and para C-H bond functionalizations. Although a surge of research papers, including reviews, demonstrating C-H functionalizations have been published in this vital area of research, to our best knowledge, this is the first review that focuses on ortho and para C-H functionalizations by photoredox catalysis to provide atom- and step-economic organic transformations. We are certain that this review will act as a promoter to highlight the application of photoredox catalysts for the functionalization of inert bonds in the domain of synthetic organic chemistry.

Cerium promoted V-g-C3N4 as highly efficient heterogeneous catalysts for the direct benzene hydroxylation

A series of Ce x -V-g-C3N4 catalysts with different cerium content were synthesized by a facile co-assembly method. Compared with pure V-g-C3N4 catalyst, the addition of cerium facilitated the high dispersion of vanadium species as well as the benzene adsorption ability of the corresponding catalysts. Also, the existence of cerium promoted the partial reduction of vanadium species, which improved the redox property of vanadium species as the active centres. The Ce x -V-g-C3N4 catalysts showed considerably improved activity in the benzene hydroxylation reaction compared with V-g-C3N4 catalyst. Among the catalysts studied, Ce0.07-0.07 V-g-C3N4 exhibited the best catalytic activity with a benzene conversion of 33.7% and a phenol yield of 32.3% with good structural and catalytic stability, while only 24.7% of benzene conversion and phenol yield of 24.2% were obtained over 0.07 V-g-C3N4.

A competing, dual mechanism for catalytic direct benzene hydroxylation from combined experimental-DFT studies

A dual mechanism for direct benzene catalytic hydroxylation is described. Experimental studies and DFT calculations have provided a mechanistic explanation for the acid-free, Tp ^x Cu-catalyzed hydroxylation of benzene with hydrogen peroxide (Tp ^x = hydrotrispyrazolylborate ligand). In contrast with other catalytic systems that promote this transformation through Fenton-like pathways, this system operates through a copper-oxyl intermediate that may interact with the arene ring following two different, competitive routes: (a) electrophilic aromatic substitution, with the copper-oxyl species acting as the formal electrophile, and (b) the so-called rebound mechanism, in which the hydrogen is abstracted by the Cu-O moiety prior to the C-O bond formation. Both pathways contribute to the global transformation albeit to different extents, the electrophilic substitution route seeming to be largely favoured.

Photocatalytic oxidation of benzene to phenol using dioxygen as an oxygen source and water as an electron source in the presence of a cobalt catalyst

The present study reports the first example of photocatalytic hydroxylation of benzene with O₂ and H₂O, both of which are the most green reagents, under visible light irradiation to afford a high turnover number.

Photocatalytic hydroxylation of benzene to phenol by dioxygen (O₂) occurs under visible light irradiation of an O₂-saturated acetonitrile solution containing [Ru^II(Me₂phen)₃]²⁺ as a photocatalyst, [Co^III(Cp*)(bpy)(H₂O)]²⁺ as an efficient catalyst for both the water oxidation and benzene hydroxylation reactions, and water as an electron source in the presence of Sc(NO₃)₃. The present study reports the first example of photocatalytic hydroxylation of benzene with O₂ and H₂O, both of which are the most green reagents, under visible light irradiation to afford a high turnover number (e.g., >500). Mechanistic studies revealed that the photocatalytic reduction of O₂ to H₂O₂ is the rate-determining step, followed by efficient catalytic hydroxylation of benzene to phenol with H₂O₂, paving a new way for the photocatalytic oxygenation of substrates by O₂ and water.

Specific Enhancement of Catalytic Activity by a Dicopper Core: Selective Hydroxylation of Benzene to Phenol with Hydrogen Peroxide

A dicopper(II) complex, stabilized by the bis(tpa) ligand 1,2-bis[2-[bis(2-pyridylmethyl)aminomethyl]-6-pyridyl]ethane (6-hpa), [Cu₂ (μ-OH)(6-hpa)]³⁺ , was synthesized and structurally characterized. This complex catalyzed selective hydroxylation of benzene to phenol using H₂ O₂ , thus attaining large turnover numbers (TONs) and high H₂ O₂ efficiency. The TON after 40 hours for the phenol production exceeded 12000 in MeCN at 50 °C under N₂ , the highest value reported for benzene hydroxylation with H₂ O₂ catalyzed by homogeneous complexes. At 22 % benzene conversion, phenol (95.2 %) and p-benzoquinone (4.8 %) were produced. The mechanism of H₂ O₂ activation and benzene hydroxylation is proposed.

Hydroxylation of Benzene via C-H Activation Using Bimetallic CuAg@g-C3N4

Bimetallic CuAg@g-C3N4 catalyst system has been designed and synthesized by impregnating copper and silver nanoparticles over the graphitic carbon nitride surface. Its application has been demonstrated in the hydroxylation of benzene under visible light.

Catalytic Hydroxylation of Benzene to Phenol by Dioxygen with an NADH Analogue

Hydroxylation of benzene by molecular oxygen (O2 ) occurs efficiently with 10-methyl-9,10-dihydroacridine (AcrH2 ) as an NADH analogue in the presence of a catalytic amount of Fe(ClO4 )3 or Fe(ClO4 )2 with excess trifluoroacetic acid in a solvent mixture of benzene and acetonitrile (1:1 v/v) to produce phenol, 10-methylacridinium ion and hydrogen peroxide (H2 O2 ) at 298 K. The catalytic oxidation of benzene by O2 with AcrH2 in the presence of a catalytic amount of Fe(ClO4 )3 is started by the formation of H2 O2 from AcrH2 , O2 , and H(+) . Hydroperoxyl radical (HO2 (.) ) is produced from H2 O2 with the redox pair of Fe(3+) /Fe(2+) by a Fenton type reaction. The rate-determining step in the initiation is the proton-coupled electron transfer from Fe(2+) to H2 O2 to produce HO(.) and H2 O. HO(.) abstracts hydrogen rapidly from H2 O2 to produce HO2 (.) and H2 O. The Fe(3+) produced was reduced back to Fe(2+) by H2 O2 . HO2 (.) reacts with benzene to produce the radical adduct, which abstracts hydrogen from AcrH2 to give the corresponding hydroperoxide, accompanied by generation of acridinyl radical (AcrH(.) ) to constitute the radical chain reaction. Hydroperoxyl radical (HO2 (.) ), which was detected by using the spin trap method with EPR analysis, acts as a chain carrier for the two radical chain pathways: one is the benzene hydroxylation with O2 and the second is oxidation of an NADH analogue with O2 to produce H2 O2 .

One-Step Selective Hydroxylation of Benzene to Phenol with Hydrogen Peroxide Catalysed by Copper Complexes Incorporated into Mesoporous Silica-Alumina

Benzene was hydroxylated with hydrogen peroxide (H2O2) in the presence of catalytic amounts of copper complexes in acetone to yield phenol at 298 K. At higher temperature, phenol was further hydroxylated with H2O2 by catalysis of copper complexes to yield p-benzoquinone. The kinetic study revealed that the rate was proportional to concentrations of benzene and H2O2, but to the square root of concentration of a copper(II) complex ([Cu(tmpa)]2+: tmpa = tris(2-pyridylmethyl)amine). The addition of a spin trapping reagent resulted in formation of a spin adduct of hydroperoxyl radical (HO2•), as observed by EPR spectroscopy, inhibiting phenol formation. HO2• produced by the reaction of [Cu(tmpa)]2+ with H2O2 acts as a chain carrier for the radical chain reactions for formation of phenol. When [Cu(tmpa)]2+ was incorporated into mesoporous silica-alumina (Al-MCM-41) by a cation exchange reaction, the selectivity to production of phenol was much enhanced by prevention of hydroxylation of phenol, which was not adsorbed to Al-MCM-41. The high durability with turnover number of 4320 for the hydroxylation of benzene to phenol with H2O2 was achieved using [Cu(tmpa)]2+ incorporated into Al-MCM-41 as an efficient and selective catalyst.

Periodic mesoporous organosilicas functionalized with iron(iii) complexes: preparation, characterization and catalysis on direct hydroxylation of benzene to phenol

Incorporation of iron(iii) complexes into hydrophobic periodic mesoporous organosilica prevents over-oxidation of phenol and hence significantly improves both the selectivity and yield of phenol compared with their corresponding homogeneous iron precursors.

Iron(iii) complexes of multidentate pyridinyl ligands: synthesis, characterization and catalysis of the direct hydroxylation of benzene

Correlation between the electrochemistry and catalytic performance of multidentate pyridinyl iron complexes in the hydroxylation of benzene suggests that more electron-donating ligands are beneficial for catalysis.

Photocatalytic alkoxylation of benzene with 3-cyano-1-methylquinolinium ion

One-pot alkoxylation of benzene with alcohols occurs under photoirradiation of 3-cyano-1-methylquinolinium ion in an oxygen-saturated acetonitrile solution containing benzene and alcohols. The photocatalytic reaction mechanism was clarified by nanosecond laser flash photolysis. The photocataytic alkoxylation of benzene is initiated by photoinduced electron transfer from benzene to the singlet excited state of 3-cyano-1-methylquinolinium ion, followed by the nucleophilic addition of alcohols to benzene radical cation. In the case of photoethoxylation, the optimal product and quantum yields of ethoxybenzene were 20% and 10%, respectively.