Evaluation of the permeability and blood-compatibility properties of membranes formed by physical interpenetration of chitosan with PEO/PPO/PEO triblock copolymers

Instantaneous drug delivery of magnetic/thermally sensitive nanospheres by a high-frequency magnetic field

Novel dual-functional nanospheres composed of magnetic iron oxide nanoparticles embedded in a thermo-sensitive Pluronic F127 (F127) matrix were successfully synthesized by an in situ coprecipitation process. The nanospheres were characterized by X-ray diffraction, transmission electron microscopy, X-ray photoelectron spectroscopy, and Raman spectroscopy. Experimental observations indicated that the F127 was subjected to a rapid structural change when the magnetic phase caused rapid heating after a short exposure to a high-frequency magnetic field. During the field duration, considerable volume shrinkage of the nanospheres (2.3-fold diameter reduction) was detected. This has been translated to an instantaneous release of a drug, Doxorubicin (DOX), when the DOX was encapsulated within the nanospheres. Such a rapidly responsive release of the DOX from the nanospheres was due to an intimate contact between the nanomagnet and F127, where an effective thermal and mechanical transfer between core and shell phases efficiently took place in the presence of the magnetic field.

Enzyme immobilization in novel alginate–chitosan core-shell microcapsules

Alginate-chitosan core-shell microcapsules were prepared in order to develop a biocompatible matrix for enzyme immobilization, where the protein is retained either in a liquid or solid core and the shell allows permeability control over substrates and products. The permeability coefficients of different molecular weight compounds (vitamin B2, vitamin B12, and myoglobin) were determined through sodium tripolyphosphate (Na-TPP)-crosslinked chitosan membrane. The microcapsule core was formed by crosslinking sodium alginate with either calcium or barium ions. The crosslinked alginate core was uniformly coated with a chitosan layer and crosslinked with Na-TPP. In the case of calcium alginate, the phosphate ions of Na-TPP were able to extract the calcium ions from alginate and liquefy the core. A model enzyme, beta-galactosidase, was immobilized in the alginate core and the catalytic activity was measured with o-nitrophenyl-beta-D-galactopyranoside (ONPG). Change in the activity of free and immobilized enzyme was determined at three different temperatures. Na-TPP crosslinked chitosan membranes were found to be permeable to solutes of up to 17,000Da molecular weight. The enzyme loading efficiency was higher in the barium alginate core (100%) as compared to the calcium alginate core (60%). The rate of ONPG conversion to o-nitrophenol was faster in the case of calcium alginate-chitosan microcapsules as compared to barium alginate-chitosan microcapsules. Barium alginate-chitosan microcapsules, however, did improve the stability of the enzyme at 37 degrees C relative to calcium alginate-chitosan microcapsules or free enzyme. This study illustrates a new method of enzyme immobilization for biotechnology applications using liquid or solid core and shell microcapsule technology.

Two liquid adsorptive entrapment of a pluronic polymer into the surface of polyaniline films

Pluronic triblock copolymers were entrapped on the surface of polyaniline (PANI) films by first immersing the latter in N-methylpyrrolidinone (NMP) solutions of one of the Pluronics for a short time. This softened the surface of the films and allowed the Pluronic molecules to entangle with PANI segments of the swollen film on the surface. Further, the films were taken out from the NMP solution and dipped into water, which is a nonsolvent for PANI. The rapid surface deswelling of PANI by the water resulted in the entrapment of the Pluronic on its surface, with the hydrophilic blocks toward water and the hydrophobic block imbedded in the PANI films. The modified PANI obtained was examined by X-ray photoelectron spectroscopy, water droplets contact angles, scanning electron microscopy, and wide angle X-ray diffraction. The surface of the Pluronic entrapped PANI films became more hydrophilic than the hydrophobic PANI films and decreased the amount of bovine serum albumin protein adsorbed on them. This means that, by reducing the biofouling, the life of the modified polyaniline film can be extended when the latter is employed as a biosensor.

Improved surface properties of polyaniline films by blending with Pluronic polymers without the modification of the other characteristics

Films of conductive polyaniline and amphiphilic Pluronic (P105) copolymer blends were prepared by dissolving the two polymers in N-methylpyrrolidinone (NMP) followed by a slow solvent evaporation at 55 degrees C. The characteristics of both doped and undoped films were determined by X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), water droplet contact angles, differential scanning calorimetry (DSC), thermal gravimetry analysis (TG), wide-angle X-ray diffraction (WAXD), and tensile strength measurements. The surface of the blends became more hydrophilic than that of the hydrophobic PANI film, but the other properties of the blends did not change appreciably for Pluronic content lower than 50 wt%. Compared to PANI films, the more hydrophilic surfaces decreased the amount of bovine serum albumin protein adsorbed. By preventing biofouling, the polyaniline-Pluronic blends can become more useful as biosensors than the polyaniline films.

Surface modification of chitosan films. Effects of hydrophobicity on protein adsorption

The surface of chitosan films was modified using acid chloride and acid anhydrides. Chemical composition at the film surface was analyzed by attenuated total reflectance Fourier-transform infrared spectroscopy (ATR-FTIR) and X-ray photoelectron spectroscopy (XPS). ATR-FTIR data verified that the substitution took place at the amino groups of chitosan, thus forming amide linkages, and the modification proceeded to the depth at least 1 microm. Choices of molecules substituted at the amino groups of the glucosamine units did affect the hydrophobicity of the film surface, as indicated by air-water contact angle analysis. The surface became more hydrophobic than that of non-modified film when a stearoyl group (C(17)H(35)CO-) was attached to the films. The reaction of chitosan films with succinic anhydride or phthalic anhydride, however, produced more hydrophilic films. Selected modified films were subjected to protein adsorption study. The amount of protein adsorbed, determined by bicinchoninic acid (BCA) assay, related to the types of attached molecules. The improved surface hydrophobicity affected by the stearoyl groups promoted protein adsorption. In contrast, selective adsorption behavior was observed in the case of the chitosan films modified with anhydride derivatives. Lysozyme adsorption was enhanced by H-bonding and charge attraction with the hydrophilic surface. While the amount of albumin adsorbed was decreased possibly due to negative charges that gave rise to repulsion between the modified surface and albumin. This study has demonstrated that it is conceivable to fine-tune surface properties which influence its response to bio-macromolecules by heterogeneous chemical modification.

Localized delivery of paclitaxel in solid tumors from biodegradable chitin microparticle formulations

Paclitaxel (Taxol)-containing chitin and chitin-Pluronic F-108 microparticles were formulated as biodegradable systems for localized administration in solid tumors. The microparticles were characterized by Fourier transform infrared (FT-IR) spectroscopy, scanning electron microscopy (SEM), and swelling studies in phosphate-buffered saline (PBS, pH 7.4). Lysozyme-induced degradation and in vitro release of paclitaxel was examined in PBS at 37 degrees C. The percent change in tumor volume was used to assess efficacy of the Formulations after local administration in murine Lewis lung carcinoma model. FT-IR confirmed higher degree of acetylation in chitin microparticles from the starting chitosan sample and the SEM showed that the chitin-Pluronic F-108 microparticles were significantly more porous than chitin microparticles. Due to higher porosity, chitin-Pluronic microparticles were able to imbibe higher swelling medium and degraded much faster in the presence of lysozyme than chitin microparticles. After 48 h. 51% of incorporated paclitaxel was released from chitin-Pluronic microparticles as compared to 28% from chitin microparticles. In vivo studies in Lewis lung carcinoma-bearing mice showed that the tumor volumes after 6 days using paclitaxel-loaded chitin and chitin-Pluronic F-108 microparticles was 458 and 307 mm3, respectively. In contrast, the tumor volume was 997 mm3 for the untreated control. The results of this study show that chitin and chitin-Pluronic F-108 microparticles are biodegradable drug delivery systems that can be useful for localized delivery of paclitaxel in solid tumors.