Drug eluting protein and polysaccharides-based biofunctionalized fabric textiles- pioneering a new frontier in tissue engineering: An extensive review

In the ever-evolving landscape of tissue engineering, medicated biotextiles have emerged as a game-changer. These remarkable textiles have garnered significant attention for their ability to craft tissue scaffolds that closely mimic the properties of natural tissues. This comprehensive review delves into the realm of medicated protein and polysaccharide-based biotextiles, exploring a diverse array of fabric materials. We unravel the intricate web of fabrication methods, ranging from weft/warp knitting to plain/stain weaving and braiding, each lending its unique touch to the world of biotextiles creation. Fibre production techniques, such as melt spinning, wet/gel spinning, and multicomponent spinning, are demystified to shed light on the magic behind these ground-breaking textiles. The biotextiles thus crafted exhibit exceptional physical and chemical properties that hold immense promise in the field of tissue engineering (TE). Our review underscores the myriad applications of drug-eluting protein and polysaccharide-based textiles, including TE, tissue repair, regeneration, and wound healing. Additionally, we delve into commercially available products that harness the potential of medicated biotextiles, paving the way for a brighter future in healthcare and regenerative medicine. Step into the world of innovation with medicated biotextiles-where science meets the art of healing.

Alginate-Based Bio-Composites and Their Potential Applications

Over the last two decades, bio-polymer fibers have attracted attention for their uses in gene therapy, tissue engineering, wound-healing, and controlled drug delivery. The most commonly used bio-polymers are bio-sourced synthetic polymers such as poly (glycolic acid), poly (lactic acid), poly (e-caprolactone), copolymers of polyglycolide and poly (3-hydroxybutyrate), and natural polymers such as chitosan, soy protein, and alginate. Among all of the bio-polymer fibers, alginate is endowed with its ease of sol–gel transformation, remarkable ion exchange properties, and acid stability. Blending alginate fibers with a wide range of other materials has certainly opened many new opportunities for applications. This paper presents an overview on the modification of alginate fibers with nano-particles, adhesive peptides, and natural or synthetic polymers, in order to enhance their properties. The application of alginate fibers in several areas such as cosmetics, sensors, drug delivery, tissue engineering, and water treatment are investigated. The first section is a brief theoretical background regarding the definition, the source, and the structure of alginate. The second part deals with the physico-chemical, structural, and biological properties of alginate bio-polymers. The third part presents the spinning techniques and the effects of the process and solution parameters on the thermo-mechanical and physico-chemical properties of alginate fibers. Then, the fourth part presents the additives used as fillers in order to improve the properties of alginate fibers. Finally, the last section covers the practical applications of alginate composite fibers.

WITHDRAWN: Epicatechin gallate-loaded calcium alginate sponges promote diabetic wound healing through protecting against oxidative stress and modulation of immune response via PI3K/AKT/NFκB signaling pathway

This article has been withdrawn at the request of the author(s) and/or editor. The Publisher apologizes for any inconvenience this may cause.

Bacterial Nanocellulose-Enhanced Alginate Double-Network Hydrogels Cross-Linked with Six Metal Cations for Antibacterial Wound Dressing

Alginate (Alg) and bacterial nanocellulose (BNC) have exhibited great potential in biomedical applications, especially wound dressing. Non-toxicity and a moisture-maintaining nature are common features making them favorable for functional dressing fabrication. BNC is a natural biopolymer that promotes major advances to the current and future biomedical materials, especially in a flat or tubular membrane form with excellent mechanical strength at hydrated state. The main drawback limiting wide applications of both BNC and Alg is the lack of antibacterial activity, furthermore, the inherent poor mechanical property of Alg leads to the requirement of a secondary dressing in clinical treatment. To fabricate composite dressings with antibacterial activity and better mechanical properties, sodium alginate was efficiently incorporated into the BNC matrix using a time-saving vacuum suction method followed by cross-linking through immersion in separate solutions of six cations (manganese, cobalt, copper, zinc, silver, and cerium). The results showed the fabricated composites had not only pH-responsive antibacterial activities but also improved mechanical properties, which are capable of acting as smart dressings. All composites showed non-toxicity toward fibroblast cells. Rat model evaluation showed the skin wounds covered by the dressings healed faster than by BNC.

Three-Dimensional (3D) Printed Silver Nanoparticles/Alginate/Nanocrystalline Cellulose Hydrogels: Study of the Antimicrobial and Cytotoxicity Efficacy

Here, a formulation of silver nanoparticles (AgNPs) and two natural polymers such as alginate (ALG) and nanocrystalline cellulose (CNC) was developed for the 3D printing of scaffolds with large surface area, improved mechanical resistance and sustained capabilities to promote antimicrobial and cytotoxic effects. Mechanical resistance, water content, morphological characterization and silver distribution of the scaffolds were provided. As for applications, a comparable antimicrobial potency against S. aureus and P. aeruginosa was demonstrated by in vitro tests as function of the AgNP concentration in the scaffold (Minimal Inhibitory Concentration value: 10 mg/mL). By reusing the 3D system the antimicrobial efficacy was demonstrated over at least three applications. The cytotoxicity effects caused by administration of AgNPs to hepatocellular carcinoma (HepG2) cell culture through ALG and ALG/CNC scaffold were discussed as a function of time and dose. Finally, the liquid chromatography-mass spectrometry (LC-MS) technique was used for targeted analysis of pro-apoptotic initiation and executioner caspases, anti-apoptotic and proliferative proteins and the hepatocyte growth factor, and provided insights about molecular mechanisms involved in cell death induction.

Silk fibroin for skin injury repair: Where do things stand?

Several synthetic and natural materials are used in soft tissue engineering and regenerative medicine with varying degrees of success. Among them, silkworm silk protein fibroin, a naturally occurring protein-based biomaterial, exhibits many promising characteristics such as biocompatibility, controllable biodegradability, tunable mechanical properties, aqueous preparation, minimal inflammation in host tissue, low cost and ease of use. Silk fibroin is often used alone or in combination with other materials in various formats and is also a promising delivery system for bioactive compounds as part of such repair scenarios. These properties make silk fibroin an excellent biomaterial for skin tissue engineering and repair applications. This review focuses on the promising characteristics and recent advances in the use of silk fibroin for skin wound healing and/or soft-tissue repair applications. The benefits and limitations of silk fibroin as a scaffolding biomaterial in this context are also discussed. STATEMENT OF SIGNIFICANCE: Silk protein fibroin is a natural biomaterial with important biological and mechanical properties for soft tissue engineering applications. Silk fibroin is obtained from silkworms and can be purified using alkali or enzyme based degumming (removal of glue protein sericin) procedures. Fibroin is used alone or in combination with other materials in different scaffold forms, such as nanofibrous mats, hydrogels, sponges or films tailored for specific applications. The investigations carried out using silk fibroin or its blends in skin tissue engineering have increased dramatically in recent years due to the advantages of this unique biomaterial. This review focuses on the promising characteristics of silk fibroin for skin wound healing and/or soft-tissue repair applications.

Bi-Layered Polymer Carriers with Surface Modification by Electrospinning for Potential Wound Care Applications

Polymeric wound dressings with advanced properties are highly preferred formulations to promote the tissue healing process in wound care. In this study, a combinational technique was investigated for the fabrication of bi-layered carriers from a blend of polyvinyl alcohol (PVA) and sodium alginate (SA). The bi-layered carriers were prepared by solvent casting in combination with two surface modification approaches: electrospinning or three-dimensional (3D) printing. The bi-layered carriers were characterized and evaluated in terms of physical, physicochemical, adhesive properties and for the safety and biological cell behavior. In addition, an initial inkjet printing trial for the incorporation of bioactive substances for drug delivery purposes was performed. The solvent cast (SC) film served as a robust base layer. The bi-layered carriers with electrospun nanofibers (NFs) as the surface layer showed improved physical durability and decreased adhesiveness compared to the SC film and bi-layered carriers with patterned 3D printed layer. Thus, these bi-layered carriers presented favorable properties for dermal use with minimal tissue damage. In addition, electrospun NFs on SC films (bi-layered SC/NF carrier) provided the best physical structure for the cell adhesion and proliferation as the highest cell viability was measured compared to the SC film and the carrier with patterned 3D printed layer (bi-layered SC/3D carrier). The surface properties of the bi-layered carriers with electrospun NFs showed great potential to be utilized in advanced technical approach with inkjet printing for the fabrication of bioactive wound dressings.

Preparation and characterisation of a novel silk fibroin/hyaluronic acid/sodium alginate scaffold for skin repair

To mimic the natural structure of tissue extracellular matrix, a novel silk fibroin (SF)/hyaluronic acid (HA)/sodium alginate (SA) composite scaffold (92% in porosity) was prepared by freeze-drying. Fourier-transform infrared spectroscopy and Raman spectra indicated interactions among SF, HA, and SA molecules. Scanning electron microscopy showed that the prepared SF/HA/SA scaffold had soft, elastic characteristics, with an average pore diameter of 93 μm. Mechanical property, thermogravimetric analyses and degradation results indicated that the SF/HA/SA scaffold had good physical stability in body fluid and mechanical movement-related environments. Cell proliferation, morphological, and live-dead analyses showed that NIH-3T3 fibroblast cells were better able to attach, grow, and proliferate on the SF/HA/SA scaffold compared with SF, SF/HA, and SF/SA scaffolds. We evaluated the wound healing effects in a rat full-thickness burn model. The hematoxylin-eosin (H&E) and Masson's trichrome staining results from SF/HA/SA scaffold showed that improved re-epithelialization, enhanced extracellular matrix remodeling. Our findings showed that the prepared SF/HA/SA scaffold can provide a potential way as a wound dressing for skin repair.

Fabrication and characterization of chicken feather keratin/polysaccharides blended polymer coated nonwoven dressing materials for wound healing applications

In this research work, three kinds of nonwoven wound dressings were developed from chicken feather keratin (CFK-NW), keratin‑sodium alginate (CFK-SA-NW) and keratin-chitosan (CFK-CS-NW) and characterized using FTIR and SEM. The physical characteristics such as air permeability, thickness and areal density test results revealed the suitability of fabricated materials for wound dressing applications. CFK-SA-NW and CFK-CS-NW indicated a positive antibacterial effect against Gram's positive Staphylococcus aureus and Gram's negative Klebsiella pneumoniae and Escherichia coli bacteria with the zone of inhibition enhanced over >2.0 cm. Moreover, the biomedical potentials of dressing materials has been investigated by cell viability and cytotoxicity tests. Further, the wound healing ability was demonstrated using in vivo model (Albino Wistar rat). The fabricated materials exhibited good support for cell viability and a strong cytocompatibility. Furthermore, the hundred percent wound healing ability of CFK-CS-NW, CFK-SA-NW, CFK-NW and untreated control rats was observed at 15, 17, 21 and 23 days, respectively, Moreover, the wound healing potential of CFK-CS-NW and CFK-SA-NW was found to be better than that of CFK-NW and control group of rats. The outcome of the present study discloses the prospective applications of the developed materials as wound dressing biomaterial.

Functionalization of electrospun polymeric wound dressings with antimicrobial peptides

Wound dressings have evolved considerably since ancient times. Modern dressings are now important systems that combine the physical and biochemical properties of natural and synthetic polymers with active compounds that are beneficial to wound healing. Antimicrobial peptides (AMPs) are the most recent addition to these systems. These aim to control the microbial proliferation and colonization of pathogens and to modulate the host's immune response. In the last decade, electrospun wound dressings have been extensively studied and the electrospinning technique recognized as an efficient approach for the production of nanoscale fibrous mats. The control of the electrospinning processing parameters, the selection of the polymer and AMPs, and the definition of the most appropriate AMPs' functionalization method contribute to the successful treatment of acute and chronic wounds. Although the use of electrospinning in wound dressings' production has been previously reviewed, the increased development of AMPs and the establishment of functionalization methods for wound dressings over recent years has increased the need for such research. In the present review, we approach all these subjects and reveal the promising therapeutic potential of wound dressings functionalized with AMPs.

Using In situ Dynamic Cultures to Rapidly Biofabricate Fabric-Reinforced Composites of Chitosan/Bacterial Nanocellulose for Antibacterial Wound Dressings

Bacterial nano-cellulose (BNC) is considered to possess incredible potential in biomedical applications due to its innate unrivaled nano-fibrillar structure and versatile properties. However, its use is largely restricted by inefficient production and by insufficient strength when it is in a highly swollen state. In this study, a fabric skeleton reinforced chitosan (CS)/BNC hydrogel with high mechanical reliability and antibacterial activity was fabricated by using an efficient dynamic culture that could reserve the nano-fibrillar structure. By adding CS in culture media to 0.25-0.75% (w/v) during bacterial cultivation, the CS/BNC composite hydrogel was biosynthesized in situ on a rotating drum composed of fabrics. With the proposed method, BNC biosynthesis became less sensitive to the adverse antibacterial effects of CS and the production time of the composite hydrogel with desirable thickness could be halved from 10 to 5 days as compared to the conventional static cultures. Although, its concentration was low in the medium, CS accounted for more than 38% of the CS/BNC dry weight. FE-SEM observation confirmed conservation of the nano-fibrillar networks and covering of CS on BNC. ATR-FTIR showed a decrease in the degree of intra-molecular hydrogen bonding and water absorption capacity was improved after compositing with CS. The fabric-reinforced CS/BNC composite exhibited bacteriostatic properties against Escherichia coli and Staphylococcus aureus and significantly improved mechanical properties as compared to the BNC sheets from static culture. In summary, the fabric-reinforced CS/BNC composite constitutes a desired candidate for advanced wound dressings. From another perspective, coating of BNC or CS/BNC could upgrade the conventional wound dressings made of cotton gauze to reduce pain during wound healing, especially for burn patients.

Comparison of the topical haemostatic efficacy of nano-micro particles of clinoptilolite and kaolin in a rat model of haemorrhagic injury

PURPOSE

This study was designed to investigate if the potential haemostatic efficacy of gauze-impregnated clinoptilolite created with nano-technology is as strong as the widely used kaolin to control pulsatile arterial bleeding due to major vascular injury.

METHODS

42 rats were separated into three groups of kaolin, clinoptilolite and control groups. The femoral artery was isolated and active arterial haemorrhage was performed. After 30 s of free arterial haemorrhage, compression was applied with a standard 100 g scale and haemostasis was assessed at the 1st, 3rd and 5th minutes. All groups were observed throughout 60 min for survival without any fluid resuscitation and the mean arterial pressure, pulse, body/surface temperature and arterial blood gas values were measured.

RESULTS

In the control group, haemostasis did not develop in any of the 12 rats and the survival rate was 5/12 (41.66 %). In the kaolin group, haemostasis developed in seven rats and of these, bleeding reoccurred in four. The survival rate was 10/13 (76.92 %). In the clinoptilolite group, haemostasis developed in eight rats and bleeding recurred in only one. The survival rate was 100 %. In terms of survival, the clinoptilolite and kaolin groups showed superiority to the control group (p = 0.002, p = 0.082). In the evaluation of recurrent haemorrhaging in the rats with haemostasis, clinoptilolite was observed to provide better coagulation than kaolin.

CONCLUSION

A statistically significant difference was determined in clinoptilolite and kaolin group, when they are separately compared with the control group in respect of the effect on MAP, HCO3 (-), lactate, base excess, haemostasis duration and survival rates. The effect of clinoptilolite on haemostasis and survival time was observed to be at least as good as that of kaolin; therefore, clinoptilolite can be used as an active ingredient in a topical haemostat.

Electrospun zwitterionic poly(sulfobetaine methacrylate) for nonadherent, superabsorbent, and antimicrobial wound dressing applications

Zwitterionic poly(sulfobetaine methacrylate) (PSBMA) has been well studied for its superhydrophilic and ultralow biofouling properties, making it a promising material for superabsorbent and nonadherent wound dressings. Electrospinning provides multiple desirable features for wound dressings, including high absorptivity due to high surface-area-to-volume ratio, high gas permeation, and conformability to contour of the wound bed. The goal of this work is to develop a fibrous membrane of PSBMA via electrospinning and evaluate its properties related to wound dressing applications. Being superhydrophilic, PSBMA fibers fabricated by a conventional electrospinning method would readily dissolve in water, whereas if cross-linker is added, the formation of hydrogel would prevent electrospinning. A three-step polymerization-electrospinning-photo-cross-linking process was developed in this work to fabricate the cross-linked electrospun PSBMA fibrous membrane. Such electrospun membrane was stable in water and exhibited high water absorption of 353% (w/w), whereas the PSBMA hydrogel only absorbed 81% water. The electrospun membrane showed strong resistance to protein adsorption and cell attachment. Bacterial adhesion studies using Gram negative P. aeruginosa and Gram positive S. epidermidis showed that the PSBMA electrospun membrane was also highly resistant to bacterial adhesion. The Ag(+)-impregnated electrospun PSBMA membrane was shown microbicidal, against both S. epidermidis and P. aeruginosa. Such electrospun PSBMA membrane is ideal for a novel type of nonadherent, superabsorbent, and antimicrobial wound dressing. The superior water absorption aids in fluid removal from highly exudating wounds while keeping the wound hydrated to support healing. Because of the resistance to protein, cell, and bacterial adhesion, the dressing removal will neither cause patients' pain nor disturb the newly formed tissues. The dressing also prevents the attachment of environmental bacteria and offers broad-spectrum antimicrobial activity. It is the first work to develop the water-stable electrospun PSBMA membrane, which has great potential for wound dressing and other applications.

Raman spectroscopy and WAXS method as a tool for analysing ion-exchange properties of alginate hydrogels

Hydrogels are cross-linked three-dimensional macromolecular networks that contain a large fraction of water within their structure. One of the most important properties of alginate hydrogels, leading to their broad versatility, is their ability for controlled uptake, release and retention of molecules. This ability, in turn, is due to specific interactions of the macromolecular network with the diffusing or retained molecule. Raman spectroscopy has been employed to characterize the diffusion properties of solutes in hydrogels. Besides their application in the food sector, they are used in many biomedical, pharmaceutical and technical areas; for example, as a natural tissue or drug carriers. In the latter case, controlled release of drugs from a wound dressing is of particular interest-or ion exchange between the drug and the structure of the dressing. Raman active vibrations were used to show the areas responsible for the penetration of the model azo-dyes (based on non-genotoxic benzidine analogs) within Ca-alginate/carboxymethylcellulose Medisorb A wound dressing. In this case, the intensity of the stretching bands was used to obtain the concentration profiles of the model dye in alginate/carboxymethylcellulose gel (Medisorb A). The characteristic band at 1511 cm(-1) indicates that new band positions were observed following dye adsorption on wound dressing. The Raman spectra of alginate immersed for different times in Ringer's solution reveal peak shifts. Differences in peak shapes and the appearance of new bands are observed as the sodium content increased. Raman spectra give direct information on the exchange process. There are also new peaks appearing at 1034-1016 and 850 cm(-1) regions in the spectra after the release studies. This could, therefore, correspond to a partial bonding between sodium and oxygen atoms (the guluronic units originate a band at approximately 1025 cm(-1)). The aim of the examination in this paper also was to investigate the crystallinity index of Medisorb A wound dressing dyed (or undyed) and Medisorb A wound dressing after the release process in Ringer's solution (the crystallinity index is about 65%). In WAXS curves we can observed additional peaks (2theta at 32 degrees and 45 degrees ).