Compatibility of poly(butadiene-co-acrylonitrile) with poly(L-lactide) and poly(3-hydroxybutyrate-co-3-hydroxyvalerate)

Morphology and performance relationship studies on biodegradable ternary blends of poly(3-hydroxybutyrate-co-3-hydroxyvalerate), polylactic acid, and polypropylene carbonate

A biodegradable ternary blend fabricated from polylactic acid (PLA), poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) and polypropylene carbonate (PPC) with a good balance of stiffness and toughness via optimizing the composition ratio and morphological structure is, to the best of the authors' knowledge, reported here for the first time. The optimal blend formulation is comprised of 20% PLA, 40% PHBV, and 40% PPC, which possesses a tensile strength measuring 44 MPa and an elongation at break measuring at 215%. Thermal performance analysis revealed an HDT value of 72 °C. The Harkins equation predicts that the three immiscible polymers formed a complete wetting morphology, which was confirmed by scanning electrical microscopy. As the PPC content of the ternary blends is increased, the material undergoes morphological transition from droplet to co-continuous structure, resulting in significant improvement of elongation at break (approximately 40 times higher than that of the PLA-PHBV binary blend). Excellent stiffness and over 200% elongation at break make these sustainable ternary blends feasible for use in packaging as substitutes for certain non-biodegradable petroleum-based single use plastics.

Fully biodegradable and biorenewable ternary blends from polylactide, poly(3-hydroxybutyrate-co-hydroxyvalerate) and poly(butylene succinate) with balanced properties

A ternary blend of entirely biodegradable polymers, namely polylactide (PLA), poly(3-hydroxybutyrate-co-hydroxyvalerate) (PHBV), and poly(butylene succinate) (PBS), was first melt-compounded in an effort to prepare novel fully biodegradable materials with an excellent balance of properties. The miscibility, morphology, thermal behavior, mechanical properties, and thermal resistance of the blends were investigated. DMA analysis revealed that PHBV and PLA showed some limited miscibility with each other, but PBS is immiscible with PLA or PHBV. Minor phase-separated structure was observed from SEM for all the blends composition except PHBV/PLA/PBS 60/30/10 blend, which formed a typical mixture of core-shell morphology. The morphologies were verified by analysis of the spreading coefficients. Excellent stiffness-toughness balance was achieved by ternary blends of PLA, PHBV, and PBS. Significant enhancement of the toughness and flexibility of PLA was achieved by the incorporation of PBS and PHBV without sacrificing the strength apparently. Both the stiffness and toughness were improved for PHBV in the ternary blends with PHBV as matrix. The crystallization of the PLA and PBS were enhanced by presence of PHBV in the blends, while the crystallization of PHBV was confined by PLA and PBS phases. Moreover, the thermal resistances and melt flow properties of the materials were also studied by analysis of the heat deflection temperature (HDT) and melt flow index (MFI) value in the work.