Polyacrylonitrile-graftedCassia pudibunda seed gum: A potential commercial gum from renewable source

Characterization of Microwave-Controlled Polyacrylamide Graft Copolymer of Tamarind Seed Polysaccharide

The main objective of the study was to prepare tamarind seed polysaccharide grafted copolymers of polyacrylamide (TSP-g-Am) using a 32 factorial design. Tamarind seed polysaccharide (TSP) was extracted, and grafted copolymer of TSP was prepared using polyacrylamide as copolymer and ceric ammonium nitrate as initiator. Various batches (F1-F9) of TSP-g-Am were prepared, among which F1 showed highest grafting efficiency; hence, the prepared TSP-g-Am (F1) was evaluated for grafting efficiency, conversion, effect of initiator and further characterized using SEM analysis, contact angle determination, DSC analysis, swelling index, swelling and deswelling, and chemical resistance. The contact angle of TSP was found to be 81 ± 2, and that of TSP-g-Am (F1) was found to be 74 ± 2, which indicates that the wetting ability of the grafted copolymer was less than that of the native polymer. The results of thermal analysis indicated that TSP-g-Am had a more stable molecular structure than TSP. The morphology of the grafted polymer was observed from SEM images, and it was observed that the particles was asymmetrical. Antimicrobial activity was also found in the grafted copolymer. The present study concludes that the TSP-g-Am showed an excellent performance in thermal stability and swelling capacity compared with TSP. The detailed structural characteristics, as well as the excellent thermal stability and swelling capacities, will make it beneficial to use the synthesised copolymer as a precursor for the production of large-scale eco-friendly advanced materials with a wide range of applications, acting as a stabiliser, thickener, binder, release retardant, modifier, suspending agent, viscosity enhancer, emulsifying agent, or carrier for novel drug delivery systems in oral, buccal, colon, and ocular systems, and in nanofabrication and wound dressing, and it is also becoming an important part of food, cosmetics, confectionery, and bakery.

Removal of lead from aqueous solutions using Cassia grandis seed gum-graft-poly(methylmethacrylate)

Using persulfate/ascorbic acid redox system, a series of Cassia grandis seed gum-graft-poly(methylmethacrylate) samples were synthesized. The copolymer samples were evaluated for lead(II) removal from the aqueous solutions where the sorption capacities were found proportional to the grafting extent. The conditions for the sorption were optimized using copolymer sample of highest percent grafting. The sorption was found pH and concentration dependent, pH 2.0 being the optimum value. Adsorption of lead by the grafted seed gum followed a pseudo-second-order kinetics with a rate constant of 4.64 x 10(-5) g/mg/min. The equilibrium data followed the Langmuir isotherm model with maximum sorption capacity of 126.58 mg/g. The influence of electrolytes NaCl, Na(2)SO(4) on lead uptake was also studied. Desorption with 2 N HCl could elute 76% of the lead ions from the lead-loaded copolymer. The regeneration experiments revealed that the copolymer could be successfully reused for at least four cycles though there was a successive loss in lead sorption capacity with every cycle. The adsorbent was also evaluated for Pb(II) removal from battery waste-water containing 2166 mg/L Pb(II). From 1000 times diluted waste water, 86.1% Pb(II) could be removed using 0.05 g/20 ml adsorbent dose, while 0.5 g/20 ml adsorbent dose was capable of removing 60.29% Pb from 10 times diluted waste water. Optimum Pb(II) binding under highly acidic conditions indicated that there was a significant contribution of nonelectrostatic interactions in the adsorption process. A possible mechanism for the adsorption has been discussed.