Swelling behavior and biocompatibility of Carbopol-containing superporous hydrogel composites

Investigation of the phytochemical composition, antioxidant, antibacterial, anti-osteoarthritis, and wound healing activities of selected vegetable waste

Agri-food wastes, produced following industrial food processing, are mostly discarded, leading to environmental hazards and losing the nutritional and medicinal values associated with their bioactive constituents. In this study, we performed a comprehensive analytical and biological evaluation of selected vegetable by-products (potato, onion, and garlic peels). The phytochemical analysis included UHPLC-ESI-qTOF-MS/MS in combination with molecular networking and determination of the total flavonoid and phenolic contents. Further, the antimicrobial, anti-osteoarthritis and wound healing potentials were also evaluated. In total, 47 compounds were identified, belonging to phenolic acids, flavonoids, saponins, and alkaloids as representative chemical classes. Onion peel extract (OPE) showed the higher polyphenolic contents, the promising antioxidant activity, the potential anti-osteoarthritis activity, and promising antimicrobial activity, especially against methicillin-resistant Staphylococcus aureus (MRSA). Furthermore, OPE revealed to have promising in vivo wound healing activity, restoring tissue physiology and integrity, mainly through the activation of AP-1 signaling pathway. Lastly, when OPE was loaded with nanocapsule based hydrogel, the nano-formulation revealed enhanced cellular viability. The affinities of the OPE major metabolites were evaluated against both p65 and ATF-2 targets using two different molecular docking processes revealing quercetin-3,4'-O-diglucoside, alliospiroside C, and alliospiroside D as the most promising entities with superior binding scores. These results demonstrate that vegetable by-products, particularly, those derived from onion peels can be incorporated as natural by-product for future evaluation against wounds and osteoarthritis.

Dual Nanostructured Lipid Carriers/Hydrogel System for Delivery of Curcumin for Topical Skin Applications

This work focuses on the development and evaluation of a dual nanostructured lipid carrier (NLC)/Carbopol®-based hydrogel system as a potential transporter for the topical delivery of curcumin to the skin. Two populations of different sized negatively charged NLCs (P1, 70–90 nm and P2, 300–350 nm) were prepared and characterized by means of dynamic light scattering. NLCs presented an ovoid platelet shape confirmed by transmission electron microscopy techniques. Curcumin NLC entrapment efficiency and release profiles were assessed by HPLC (high pressure liquid chromatography) and spectrophotometric methods. Preservation and enhancement of curcumin (CUR) antioxidant activity in NLCs (up to 7-fold) was established and cell viability assays on fibroblasts and keratinocytes indicated that CUR-NLCs are non-cytotoxic for concentrations up to 10 μM and exhibited a moderate anti-migration/proliferation effect (20% gap reduction). CUR-NLCs were then embedded in a Carbopol®-based hydrogel without disturbing the mechanical properties of the gel. Penetration studies on Franz diffusion cells over 24 h in CUR-NLCs and CUR-NLCs/gels demonstrated an accumulation of CUR in Strat-M® membranes of 22% and 5%, respectively. All presented data support the use of this new dual CUR-NLC/hydrogel system as a promising candidate for adjuvant treatment in topical dermal applications.

Development and Evaluation of Ginkgo biloba/Sodium Alginate Nanocomplex Gel as a Long-Acting Formulation for Wound Healing

The aim of the study was to develop and evaluate the Ginkgo biloba nanocomplex gel (GKNG) as a long-acting formulation for the wound healing potential. Pharmaceutical analysis showed an average particle size of 450.14 ± 36.06 nm for GKNG, zeta potential +0.012 ± 0.003 mV, and encapsulation efficiency 91 ± 1.8%. The rheological analysis also showed the optimum diffusion rate and viscosity needed for topical drug delivery. Fourier transform infrared spectroscopy (FTIR), powder X-ray diffractometry (PXRD), scanning electron microscopy (SEM), and transmission electron microscopy (TEM) analysis further confirmed the success of GKNG. The in vivo study showed increments in the antioxidant enzymes superoxide dismutase (SOD) and glutathione peroxidase (GPx) and a lower level of lipid peroxidation (MDA) after GKNG treatment. The GKNG group showed upregulations in collagen type I, as alpha 1 collagen (COL1A1), and collagen type IV, as alpha 1 collagen (COL4A1). Furthermore, the in vivo study showed increments in hydroxyproline, epidermal growth factor (EGF), vascular endothelial growth factor (VEGF), and transforming growth factor-beta 1 (TGF-β1) after the GKNG. Additionally, GKNG effectively increased the wound contraction compared to GK gel and sodium alginate (SA) gel. Based on the in vitro and in vivo evaluation, GKNG effectively accelerated wound healing by modulation of antioxidant enzymes, collagens, angiogenic factors, and TGF-β1.

Development and characterization of a dry reservoir-hydrogel-forming microneedles composite for minimally invasive delivery of cefazolin

Cefazolin (CFZ) is one of the most extensively used cephalosporins. This antibiotic exerts its bactericidal activity by interfering with bacterial cell wall formation, leading to bacteriolysis. CFZ is highly polar, resulting in the drug having poor oral bioavailability. Accordingly, the antibiotic is administered via intramuscular or intravenous injections, which are both painful and invasive. Due to these limitations, there is an impetus to explore alternative drug delivery platforms which offer a minimally invasive approach to delivery CFZ into and across the skin. The current work presents the development of a composite pharmaceutical system composed of hydrogel-forming microneedles (MNs) in tandem with CFZ dry reservoirs. The hydrogel system was fabricated from Gantrez® S-97 and Carbopol® 974P NF crosslinked with PEG 10,000. Swelling kinetic studies showed that the hydrogel system developed was capable of achieving 4000% swelling in PBS pH 7.4. In addition, results from a solute diffusion study showed that CFZ was able to achieve ≈100% cumulative permeation across the swollen hydrogel film. When formulated into MNs, the hydrogel system was capable of breaching the stratum corneum, resulting in intradermal insertion of the hydrogel forming MNs into ex vivo neonatal porcine skin, as evidenced from optical coherence tomography. In addition, two different CFZ loaded dry reservoirs consisting of directly compressed tablets (DCT) and lyophilised (LYO) wafers were formulated and characterised. These dry reservoir systems showed fast dissolution, dissolving in phosphate buffer saline pH 7.4 in less than one minute. In vitro permeation studies, using full thickness ex vivo neonatal porcine skin were conducted. HPLC analysis demonstrated the dry reservoir combination consisting of DCT with hydrogel-forming MNs was capable of achieving up to 80 µg CFZ delivery into the epidermis within 2 hours of application. In addition, DCT reservoir coupled with hydrogel-forming MNs were able to deliver CFZ up to 1.8 mg into and across the skin at 24 hours. Should this system be translated into clinical practice, it may provide a minimally invasive strategy to administer CFZ for the treatment of infections such as septic arthritis, osteomyelitis and cellulitis.

Development, Optimization, and In Vitro Evaluation of Novel Oral Long-Acting Resveratrol Nanocomposite In-Situ Gelling Film in the Treatment of Colorectal Cancer

This study aimed to develop and evaluate sustained-release (SR) long-acting oral nanocomposites in-situ gelling films of resveratrol (Rv) to treat colorectal cancer. In these formulations, Rv-Soy protein (Rv-Sp) wet granules were prepared by the kneading method and then encapsulated in the sodium alginate (NA) dry films. The prepared nanocomposite in-situ gels films were characterized using dynamic light scattering, Fourier-transform infrared spectroscopy, X-ray diffraction, and scanning electron microscopy. The optimized formulations were further evaluated based on drug encapsulation efficiency, pH-drug release profile, swelling study, and storage time effects. The optimized formulation was tested for its anticancer activity against colorectal cancer cells using the cytotoxicity assessment, apoptosis testing, cell cycle analysis, gene expression analysis, and protein estimation by the reverse-transcriptase polymerase chain reaction and enzyme-linked immunosorbent assay methods, respectively. The optimum film showed encapsulation efficiency of 97.87% ± 0.51 and drug release of 14.45% ± 0.043 after 8 h. All physiochemical characterizations confirmed, reasoned, and supported the drug release experiment's findings and the encapsulation assay. The Rv nanocomposite formulation showed concentration-dependent cytotoxicity enhanced apoptotic activity as compared to free Rv (p < 0.05). In addition, Rv nanocomposite formulation caused a significant increase in Bcl-2-associated protein X (Bax) and a decrease in expression of B-cell lymphoma 2, interleukin 1 beta, IL-6, and tumor necrosis factor-alpha (Bcl2, IL-1β, IL-6, and TNF-α respectively) compared to that of free Rv in HCT-116 cells. These results suggest that long-acting Rv nanocomposite gels could be a promising agent for colorectal cancer treatment.

Optimization, in vitro release and toxicity evaluation of novel pH sensitive itaconic acid-g-poly(acrylamide)/sterculia gum semi-interpenetrating networks

BACKGROUND

In recent era, pH sensitive polymeric carriers that combines the materials engineering and medicine is gaining researcher's attention as they maximizes drug concentration at site of absorption and reduces side effects for e.g. orally administered cetirizine HCl (CTZ HCl) upsets the stomach and furthermore shows high intestinal absorption. Thus, development of pH sensitive hydrogels with sufficient mechanical strength will be good candidate to address this issue.

METHODS

Here, we developed pH sensitive itaconic acid-g-poly(acrylamide)/sterculia gum (IA-g-poly(AM)/sterculia gum) semi-interpenetrating network (semi-IPN) by free radical polymerization technique for intestinal delivery of CTZ HCL.

RESULTS

Optimized formulation (I5) with 6% w/w IA showed negligible swelling at pH 1.2, and maximum swelling at pH 7.4. Solid state characterization of optimized formulation showed successful development of semi-IPN structure and incorporation of drug without any noticeable drug-carrier interaction. In vitro release study showed biphasic pH dependent release of CTZ HCl, where initial burst release was observed at acidic pH followed by sustained release at basic pH. Acute oral toxicity and histopathological studies confirmed the non-toxic nature of IA-g-poly(AM)/sterculia gum.

CONCLUSION

Conclusively, developed biocompatible semi-IPN hydrogels with sufficient pH sensitivity and mechanical strength could serve as a potential carrier for intestinal delivery of CTZ HCL to maximize its absorption and reduce side effects.

Graphene-laden hydrogels: A strategy for thermally triggered drug delivery

The synthesis of graphene-based materials has attracted considerable attention in drug delivery strategies. Indeed, the conductivity and mechanical stability of graphene have been investigated for controlled and tunable drug release via electric or mechanical stimuli. However, the design of a thermo-sensitive scaffold using pristine graphene (without distortions related to the oxidation processes) has not been deeply investigated yet, although it may represent a promising approach for several therapeutic treatments. Here, few-layer graphene was used as a nanofiller in a hydrogel system with a thermally tunable drug release profile. In particular, varying the temperature (25 °C, 37 °C and 44 °C), responsive drug releases were noticed and hypothesized depending on the formation and perturbation of π-π interactions involving graphene, the polymeric matrix and the model drug (diclofenac). As a result, these hybrid hydrogels show a potential application as thermally triggered drug release systems in several healthcare scenarios.

Succinoglycan dialdehyde-reinforced gelatin hydrogels with toughness and thermal stability

Pure gelatin hydrogel (PG) has limited practical applications due to their thermal instability and unfavorable mechanical properties. To overcome these limitations, dually crosslinked hydrogels were developed by imparting chemical crosslinking to existing physically crosslinked gelatin hydrogel networks using succinoglycan dialdehyde (SGDA) as a macromolecular crosslinker. SGDA-reinforced gelatin hydrogels (SGDA/Gels) displayed an 11 times higher compressive stress under identical deformation strain and a 1040% improvement in storage modulus (G') than PG. In addition, chemical crosslinking induced by SGDA increased the thermal stability of SGDA/Gels, such that they did not decompose at 60 °C, as confirmed by oscillatory temperature ramp experiments. The newly synthesized SGDA/Gels with reinforced networks and thermal stability exhibit potential for long-term use as controlled drug delivery carriers and 3D cell culture scaffolds for tissue engineering.

Biofabrication of three-dimensional cellular structures based on gelatin methacrylate-alginate interpenetrating network hydrogel

Hydrogels have been widely used as extracellular matrix materials in various three-dimensional bioprinting applications. However, they possess limitations such as insufficient mechanical integrity and strength, especially in the vascular applications requiring suture retention and tolerance of systemic intraluminal pressure. Interpenetrating network hydrogels are unique mixtures of two separate hydrogels with enhanced properties. This paper has demonstrated the fabrication of three-dimensional cellular constructs based on gelatin methacrylate-alginate interpenetrating network hydrogels using a microgel-assisted bioprinting method. Filament formation was investigated in terms of the filament diameter under different nozzle speed and dispensing pressure, and a phase diagram to identify the optimal conditions for continuous and uniform filaments was prepared. Three-dimensional hollow cellular constructs were fabricated and the cell viability was 75% after 24-hour incubation. The post-printing properties were characterized including mechanical properties, degradation and swelling properties, and pore size. The interpenetrating network hydrogels with different concentrations were compared with their individual components. It is found that the interpenetrating network hydrogels exhibit stronger mechanical properties, faster degradation and larger pore sizes than their individual components.

The Carbomer-Lecithin Adjuvant Adjuplex Has Potent Immunoactivating Properties and Elicits Protective Adaptive Immunity against Influenza Virus Challenge in Mice

The continued discovery and development of adjuvants for vaccine formulation are important to safely increase potency and/or reduce the antigen doses of existing vaccines and tailor the adaptive immune response to newly developed vaccines. Adjuplex is a novel adjuvant platform based on a purified lecithin and carbomer homopolymer. Here, we analyzed the adjuvant activity of Adjuplex in mice for the soluble hemagglutinin (HA) glycoprotein of influenza A virus. The titration of Adjuplex revealed an optimal dose of 1% for immunogenicity, eliciting high titers of HA-specific IgG but inducing no significant weight loss. At this dose, Adjuplex completely protected mice from an otherwise lethal influenza virus challenge and was at least as effective as the adjuvants monophosphoryl lipid A (MPL) and alum in preventing disease. Adjuplex elicited balanced Th1-/Th2-type immune responses with accompanying cytokines and triggered antigen-specific CD8⁺ T-cell proliferation. The use of the peritoneal inflammation model revealed that Adjuplex recruited dendritic cells (DCs), monocytes, and neutrophils in the context of innate cytokine and chemokine secretion. Adjuplex neither triggered classical maturation of DCs nor activated a pathogen recognition receptor (PRR)-expressing NF-κB reporter cell line, suggesting a mechanism of action different from that reported for classical pathogen-associated molecular pattern (PAMP)-activated innate immunity. Taken together, these data reveal Adjuplex to be a potent and well-tolerated adjuvant with application for subunit vaccines.

Stimuli-responsive hydrogels in drug delivery and tissue engineering

Hydrogels are the three-dimensional network structures obtained from a class of synthetic or natural polymers which can absorb and retain a significant amount of water. Hydrogels are one of the most studied classes of polymer-based controlled drug release. These have attracted considerable attention in biochemical and biomedical fields because of their characteristics, such as swelling in aqueous medium, biocompatibility, pH and temperature sensitivity or sensitivity towards other stimuli, which can be utilized for their controlled zero-order release. The hydrogels are expected to explore new generation of self-regulated delivery system having a wide array of desirable properties. This review highlights the exciting opportunities and challenges in the area of hydrogels. Here, we review different literatures on stimuli-sensitive hydrogels, such as role of temperature, electric potential, pH and ionic strength to control the release of drug from hydrogels.

Development of bioadhesive chitosan superporous hydrogel composite particles based intestinal drug delivery system

Bioadhesive superporous hydrogel composite (SPHC) particles were developed for an intestinal delivery of metoprolol succinate and characterized for density, porosity, swelling, morphology, and bioadhesion studies. Chitosan and HPMC were used as bioadhesive and release retardant polymers, respectively. A 3² full factorial design was applied to optimize the concentration of chitosan and HPMC. The drug loaded bioadhesive SPHC particles were filled in capsule, and the capsule was coated with cellulose acetate phthalate and evaluated for drug content, in vitro drug release, and stability studies. To ascertain the drug release kinetics, the drug release profiles were fitted for mathematical models. The prepared system remains bioadhesive up to eight hours in intestine and showed Hixson-Crowell release with anomalous nonfickian type of drug transport. The application of SPHC polymer particles as a biomaterial carrier opens a new insight into bioadhesive drug delivery system and could be a future platform for other molecules for intestinal delivery.

High encapsulation efficiency of poloxamer-based injectable thermoresponsive hydrogels of etoposide

CONTEXT

Hydrogels are promising polymeric network capable of sustaining the release of drug but have a major limitation for encapsulation of hydrophobic drugs.

OBJECTIVE

This study was undertaken to encapsulate etoposide in poloxamer 407-based thermosensitive hydrogels with an aim to sustain its release.

MATERIALS AND METHODS

Etoposide-loaded hydrogels were prepared by the cold method and optimized for encapsulation efficiency (EE) by a 3(2) factorial design. Poloxamer 407-poloxamer 188 hydrogel (E-P407-P188) and poloxamer 407-poly(ethylene glycol) (E-P407-PEG) hydrogel were characterized for SEM, swelling, sol-gel phase transition and injectability study.

RESULTS AND DISCUSSION

In E-P407-P188 hydrogel the EE of 75% could be obtained and in E-P407-PEG hydrogels the EE was 84%. The SEM images showed a porous structure. The release of ETO was sustained up to 48 h by E-P407-PEG hydrogel and 24 h by E-P407-P188 hydrogel. The drug release was governed by first-order kinetics and followed Fickian diffusion mechanism in both the cases.

CONCLUSION

Such injectable thermosensitive hydrogel of etoposide could be effectively used for continuous release of drug to the tumor and surrounding tissues.

Rheological, mechanical, and bioadhesive behavior of hydrogels to optimize skin delivery systems

BACKGROUND

Hydrogels are widely used for cutaneous formulations; thereby comparing the bioadhesive properties of polymers with a view to prolong the residence time of topical drugs on the skin would be very useful to design novel topical drug delivery systems.

AIM

The objective of this study was to correlate data from rheological studies and texture profile analysis, with bioadhesion on the skin.

METHODS

Polyacrylic acid polymers used were carbomer homopolymer type A (C971) and type B (C974), and polycarbophil (PP) dispersed in water at various concentrations (0.1, 0.5, 1.0, 1.5, 2.0, 3.0, 5.0%, w/v). Rheological, texture, and bioadhesive properties were determined to compare the hydrogels.

RESULTS

Rheological analysis showed that all samples exhibited pseudoplastic behavior with thixotropy. Texture profile analysis showed that compressibility, hardness, and adhesiveness of the hydrogels were dependent on the polymer concentration, and the cohesion values were high. Bioadhesion of C974 and PP at 0.5 and 2% was of the same magnitude, while all samples of C971 had lower values. The bioadhesion of 5% C974 was the highest, while that 5% PP was lower, possibly because PP showed the greatest hardness and this rigidity may decrease the interaction of the polymer with the skin.

CONCLUSION

A comprehensive comparative rheological and textural analyses of several polymers for topical systems were undertaken in terms of their bioadhesion. Therefore, it is possible to conclude that these polymers can be used for optimization of drug delivery systems on the skin.

Drug delivery applications for superporous hydrogels

INTRODUCTION

Considerable advances have been made to hydrogels with the development of faster swelling superporous hydrogels (SPHs). These new-generation hydrogels have large numbers of interconnected pores, giving them the capacity to absorb large amounts of water at an accelerated rate. This gives SPHs the ability to be used in a variety of novel drug delivery applications, such as gastric retention and peroral intestinal delivery of proteins and peptides.

AREAS COVERED

This review focuses on the applications of SPHs for drug transport and targeted drug therapies, as well as the characteristics and historical advancements made to SPH synthesis as it pertains to drug delivery. Manufacturing considerations and challenges that must be overcome are also discussed, such as scale-up, biocompatibility and safety.

EXPERT OPINION

Modern SPHs have high swelling and high mechanical strength making them suitable for many diverse pharmaceutical and biomedical applications. However, demonstrative preclinical animal studies still need to be confirmed in human trials, to further address safety issues and confirm therapeutic success when using SPHs as platforms for drug delivery. The focus of forthcoming applications of SPHs is likely to be in the area of oral site-specific delivery and regenerative medicine.

A review on composite liposomal technologies for specialized drug delivery

The combination of liposomes with polymeric scaffolds could revolutionize the current state of drug delivery technology. Although liposomes have been extensively studied as a promising drug delivery model for bioactive compounds, there still remain major drawbacks for widespread pharmaceutical application. Two approaches for overcoming the factors related to the suboptimal efficacy of liposomes in drug delivery have been suggested. The first entails modifying the liposome surface with functional moieties, while the second involves integration of pre-encapsulated drug-loaded liposomes within depot polymeric scaffolds. This attempts to provide ingenious solutions to the limitations of conventional liposomes such as short plasma half-lives, toxicity, stability, and poor control of drug release over prolonged periods. This review delineates the key advances in composite technologies that merge the concepts of depot polymeric scaffolds with liposome technology to overcome the limitations of conventional liposomes for pharmaceutical applications.