Wetting behavior of electrospun poly(L-lactic acid)/poly(vinyl alcohol) composite nonwovens

A novel preparation of anti-layered poly(vinylalcohol)–polyacrylonitrile (PVA/PAN) membrane for air filtration by electrospinning

Schematic for the preparation of PAN/PVA membrane deposited on the stainless steel mesh modified by dilute PVA solution.

Promoting Diabetic Wound Therapy Using Biodegradable rhPDGF-Loaded Nanofibrous Membranes: CONSORT-Compliant Article

The nanofibrous biodegradable drug-loaded membranes that sustainably released recombinant human platelet-derived growth factor (rhPDGF-BB) to repair diabetic wounds were developed in this work.rhPDGF-BB and poly(lactic-co-glycolic acid) (PLGA) were mixed in hexafluoroisopropyl alcohol, followed by the electrospinning of the solutions into biodegradable membranes to equip the nanofibrous membranes. An elution technique and an enzyme-linked immunosorbent assay kit were used to determine the rhPDGF-BB release rates in vitro and in vivo from this membrane. Eighteen Sprague-Dawley streptozotocin-induced diabetic rats were randomized into 3 groups: rhPDGF-BB-loaded nanofibrous membrane group, PLGA only membrane group, and conventional gauze sponge group for the wound associated with diabetes of rat in each group.The nanofibrous biodegradable membranes released effective concentrations of rhPDGF-BB for over 21 days. The nanofibrous rhPDGF-BB-loaded PLGA membranes contained more water and were further hydrophilic than PLGA only fibers. The rhPDGF-BB-loaded PLGA membranes considerably helped the diabetic wounds repairing. Furthermore, the proliferative cells and angiogenesis of rats associated with diabetes by rhPDGF-BB-loaded nanofibrous membranes were greater than those of other groups, owing to the increased matrix metalloproteinase 9.These biodegradable rhPDGF-BB-loaded membranes were effective in treating diabetic wounds as very advanced accelerators during the initial phases of wound-healing process.

Wetting Hierarchy in Oleophobic 3D Electrospun Nanofiber Networks

Wetting behavior between electrospun nanofibrous networks and liquids is of critical importance in many applications including filtration and liquid-repellent textiles. The relationship between intrinsic nanofiber properties, including surface characteristics, and extrinsic nanofibrous network organization on resultant wetting characteristics of the nanofiber network is shown in this work. Novel 3D imaging exploiting focused ion beam (FIB) microscopy and cryo-scanning electron microscopy (cryo-SEM) highlights a wetting hierarchy that defines liquid interactions with the network. Specifically, small length scale partial wetting between individual electrospun nanofibers and low surface tension liquids, measured both using direct SEM visualization and a nano Wilhelmy balance approach, provides oleophobic surfaces due to the high porosity of electrospun nanofiber networks. These observations conform to a metastable Cassie-Baxter regime and are important in defining general rules for understanding the wetting behavior between fibrous solids and low surface tension liquids for omniphobic functionality.

The effect of elastic biodegradable polyurethane electrospun nanofibers on the differentiation of mesenchymal stem cells

Biodegradable polyurethane (PU) was synthesized based on using poly(ɛ-caprolactone) (PCL) as the soft segment. Fibers in different diameters (200-400nm, 600-800nm, and 1.4-1.6μm) were then made by electrospinning PU solution in N,N-dimethylacetamide and 2,2,2-trifluoroethanol. Human bone marrow derived mesenchymal stem cells (hMSCs) in the form of single dispersed cells or aggregates were seeded on the electrospun meshes for evaluation of cell behavior. Differentiation experiments showed that hMSC aggregates on electrospun fibers had greater differentiation capacities than single cells. Besides, nanofibers of 200-400nm diameters significantly promoted the osteogenic and chondrogenic differentiation of hMSCs than fibers of the other diameters. The effect of substrate elasticity was further elucidated by comparing cell behaviors on the nanofibers of PCL-based PU and those of pure PCL. The more elastic PU nanofibers demonstrated more osteogenic and chondrogenic induction potential than PCL electrospun fibers. We suggested that the elastic nanofibers seeded with hMSC aggregates may be advantageous for cartilage and bone tissue engineering.

Tailored fibro-porous structure of electrospun polyurethane membranes, their size-dependent properties and trans-membrane glucose diffusion

The aim of this study was to develop polyurethane (PU) based fibro-porous membranes and to investigate the size-effect of hierarchical porous structure on permeability and surface properties of the developed electrospun membranes. Non-woven Selectophore™ PU membranes having tailored fibre diameters, pore sizes, and thickness were spun using electrospinning, and their chemical, physical and glucose permeability properties were characterised. Solvents, solution concentration, applied voltage, flow rate and distance to collector, each were systematically investigated, and electrospinning conditions for tailoring fibre diameters were identified. Membranes having average fibre diameters - 347, 738 and 1102 nm were characterized, revealing average pore sizes of 800, 870 and 1060 nm and pore volumes of 44, 63 and 68% respectively. Hydrophobicity increased with increasing fibre diameter and porosity. Effective diffusion coefficients for glucose transport across the electrospun membranes varied as a function of thickness and porosity, indicating high flux rates for mass transport. Electrospun PU membranes having significantly high pore volumes, extensively interconnected porosity and tailorable properties compared to conventional solvent cast membranes can find applications as coatings for sensors requiring analyte exchange.