Cationically cured natural oil-based green composites: Effect of the natural oil and the agricultural fiber

Furfuryl alcohol/tung oil matrix-based composites reinforced with bacterial cellulose fibres

Polymeric materials have drastically changed the society in the last century. However, their non-renewable origin, together with their indiscriminate use and disposal, resulted in a huge accumulation of waste in the environment and raised a wide discussion about the emission of greenhouse gases, which must be considerably reduced to minimize global warming. Thus, the establishment of a consolidated production of polymers prioritizing the use of renewable sources of raw materials became a hot research topic. Vegetable oils are protagonists of this initiative, and their carbon-carbon double bonds are convenient reactive sites for chain growth polymerization reactions. However, typical vegetable oil-based homopolymers often do not display competitive thermo-mechanical properties, and the preparation of the corresponding copolymers and composites is therefore an interesting alternative strategy. Herein, the preparation of composites based on a tung oil/furfuryl alcohol co-continuous network reinforced with bacterial cellulose fibers is described. For this purpose, the cellulose nanofibers were suspended in furfuryl alcohol, and different amounts of the ensuing suspension were mixed with tung oil in the presence of trifluoroacetic acid as cationic initiator. Fourier-transform infrared spectroscopy analysis of all samples indicated the association of both tung oil and furfuryl alcohol in the final materials, with peaks belonging to cellulose superposed at the fingerprint regions of composites. Differential scanning calorimetry and thermogravimetry demonstrated an interesting relationship between the composition and the corresponding thermal properties, and the morphology of the materials was assessed by scanning electron microscopy (SEM), which revealed a homogeneous distribution of cellulosic fibers at lower concentrations. The results gathered here contribute to the development of original macromolecular materials exclusively based on the renewable platform.

A Review on Styrene Substitutes in Thermosets and Their Composites

In recent decades, tremendous interest and technological development have been poured into thermosets and their composites. The thermosets and composites with unsaturated double bonds curing system are especially concerned due to their versatility. To further exploit such resins, reactive diluents (RDs) with unsaturated sites are usually incorporated to improve their processability and mechanical properties. Traditional RD, styrene, is a toxic volatile organic compound and one of the anticipated carcinogens warned by the National Institute of Health, USA. Most efforts have been conducted on reducing the usage of styrene in the production of thermosets and their composites, while very few works have systematically summarized these literatures. Herein, recent developments regarding styrene substitutes in thermosets and their composites are reviewed. Potential styrene alternatives, such as vinyl derivatives of benzene and (methyl)acrylates are discussed in details. Emphasis is focused on the strategies on developing novel RD monomers through grafting unsaturated functional groups on renewable feedstocks such as carbohydrates, lignin, and fatty acids. This review also highlights the development and characteristics of RD monomers and their influence on processability and mechanical performance of the resulting thermosets and composites.

Bio-Based Polymers with Potential for Biodegradability

A variety of renewable starting materials, such as sugars and polysaccharides, vegetable oils, lignin, pine resin derivatives, and proteins, have so far been investigated for the preparation of bio-based polymers. Among the various sources of bio-based feedstock, vegetable oils are one of the most widely used starting materials in the polymer industry due to their easy availability, low toxicity, and relative low cost. Another bio-based plastic of great interest is poly(lactic acid) (PLA), widely used in multiple commercial applications nowadays. There is an intrinsic expectation that bio-based polymers are also biodegradable, but in reality there is no guarantee that polymers prepared from biorenewable feedstock exhibit significant or relevant biodegradability. Biodegradability studies are therefore crucial in order to assess the long-term environmental impact of such materials. This review presents a brief overview of the different classes of bio-based polymers, with a strong focus on vegetable oil-derived resins and PLA. An entire section is dedicated to a discussion of the literature addressing the biodegradability of bio-based polymers.

Fabrication and characterization of in situ graphene oxide reinforced high-performance shape memory polymeric nanocomposites from vegetable oil

Polymeric nanocomposites have been fabricated via in situ cationic polymerization of linseed oil in the presence of surface-modified graphene oxide (SGO).

Engineered elastomeric bio-nanocomposites from linseed oil/organoclay tailored for vibration damping

This study deals with the preparation and characterization of elastomeric nanocomposites from renewable resources for vibration damping applications.